elliot martock
GMP SA are proud to announce the addition of Lab Essentials
to our comprehensive Martock range of Micropositioners and
Fibre-Optic products. The range includes:
ELLIOT MARTOCK
GMP SA
Av. des Beaumettes 17
1020 Renens
021 633 21 21
www.gmp.ch
2
ELLIOT MARTOCK
Bases
BAS001 One sided base
One sided base for mounting our POH
range or other post holders. The base
has a clearance hole, to allow post
holders to be attached by M6 or ¼"-20
soc cap screws.
All bases are compatible with English
or Metric optical tables. Bases are
machined specifically for stable
mounting.
BAS002 Two sided base
Two sided base for mounting the POH
range of post holders. The base has a
clearance hole, to allow post holders
to be attached by M6 or ¼"-20 soc cap
screws.
BAS003
Twin slotted base for mounting the
POH range of post holders. The base
has three clearance holes, to allow post
holders to be attached by M6 or ¼"-20
soc cap screws.
BAS101 Pedestal base adaptor
Pedestal base adaptor to convert the
POP range of 1" pillar posts to 1"
pedestal pillar posts. Can also be used
to convert the POH post holders into
pedestal style allowing the use of TCL
clamping forks.
Part No.
BAS001
BAS002
BAS003
BAS101
GMP SA
Description
One sided base
Two sided base
Twin slotted base
Pedestal base adapter
Av. des Beaumettes 17
CHF*
12
13
17
17
1020 Renens
Dimensions (mm)
25 x 57.5 x 9.2
25 x 76 x 9.2
50 x 76 x 9.2
021 633 21 21
www.gmp.ch
ELLIOT MARTOCK
Posts
A complete range of ½ inch diameter precision
ground stainless steel posts from 20 to 300mm
length.
The post is tapped M6 in the base with a
removable M4 socket set screw in the top. A
through hole is provided to allow tightening
when mounted directly to an optical table.
Part No.
POS020
POS030
POS040
POS050
POS075
POS100
POS150
POS200
POS250
POS300
Length (mm)
20
30
40
50
75
100
150
200
250
300
CHF*
12
12
12.5
13
13.5
14
16
17
20
23
Post Holders
These post holders are designed to hold our
POS range of posts or any other ½ inch post.
The internal relief cut design provides two line
contacts for stable positioning of the post. All
post holders have a spring-loaded thumbscrew
included for easy positioning, THS001, which is
also available as a separate item.
Part No.
POH025
POH040
POH050
POH075
POH100
POH150
GMP SA
Length (mm)
25
40
50
75
100
150
CHF*
15
15
17
17
20
27
Av. des Beaumettes 17
The post holders may be mounted to optical
tables by an M6 tapped hole in the base or
using the BAS000X range of bases. Post
holders may be converted to pedestal style
using the BAS101.
1020 Renens
021 633 21 21
www.gmp.ch
ELLIOT MARTOCK
Table Clamps
TCL001
General purpose table clamp.
Table clamps are available for holding the BAS
range of bases where suitable holes are not
available on the optical table.
This table clamp is English or Metric table
compatible.
TCL002
Compact variable height table clamp (shown with
base, post holder, post & mirror mount)
Table clamps are available for holding the BAS
range of bases where suitable holes are not
available on the optical table.
The TCL002 has an M6 screw thread and a
clearance slot to accept either an M6 or ¼"-20
bolt.
Part No.
CHF*
Dimensions (mm)
TCL001
9
18 x 19 x 50
TCL002
10
12.6 x 10 x 50
Table Clamping Forks
Table clamping forks are available for holding
PPP pedestal pillar posts or POH post holders
that have been fitted with a BAS101 pedestal
base adapter.
Two options are available: short & long.
Part No.
TCL011
TCL012
GMP SA
Description
CHF*
Table clamp fork long 22
Table clamp fork short 24
Av. des Beaumettes 17
1020 Renens
021 633 21 21
www.gmp.ch
5
ELLIOT MARTOCK
1” Pillar Posts
A range of 1 inch stainless steel posts for general
mounting applications. The posts are tapped M4
in one end to accept optical mounts and M6 in
the other for mounting to optical tables.
A through hole is provided to allow tightening
when mounted directly to optical tables. Can also
be used as extensions for PPP pedestal posts.
The POP pillar posts can be converted to
pedestal style pillar posts with the addition of our
BAS101 pedestal base adapter (below).
Part No.
POP012
POP025
POP050
POP075
POP100
POP150
Description
Pillar post 12.5mm long
Pillar post 25mm long
Pillar post 50mm long
Pillar post 75mm long
Pillar post 100mm long
Pillar post 150mm long
CHF*
28
32
36
43
45
52
1” Pedestal Pillar Posts
A range of 1" stainless steel pedestal posts for
direct mounting of optical components. When
used with table clamping forks (TCL011 or
TCL012) these posts can be positioned anywhere
on an optical table.
The height can be extended with the POP range
of posts. A through hole is provided to allow
tightening when attached to other posts.
Tapped M4 both ends.
Part No.
PPP025
PPP050
PPP075
PPP100
Description
Pedestal pillar post 12.5mm long
Pedestal pillar post 50mm long
Pedestal pillar post 75mm long
Pedestal pillar post 100mm long
CHF*
40
42
46
55
left: Pedestal pillar post with one of our table clamping forks
GMP SA
Av. des Beaumettes 17
1020 Renens
021 633 21 21
www.gmp.ch
ELLIOT MARTOCK
High Precision Mirror Mounts with Interchangeable Front Plates
The E91X Series high precision mirror mounts offer a number of
unique features:
z Buy as a 1”, 2”, 3” or 4” mirror mount
z Interchangeable front plates are available allowing you to
z convert to another size at minimal cost
z e.g. Buy a 3” mirror mount for CHF 670, then to convert it with a
z front plate costs only CHF 170
z User configurable: right-hand or left-hand geometry
z 0.25 pitch highest quality hand-lapped adjusters with approx z
z 100 turns per inch thread
z Hex drive adjusters with removable knurled knobs
z Rear optic loading for repeatable location of mirror face
z Engraved cross-hairs aid alignment
E910 High Precision Mirror Mount Frame with z Excellent long term stability
EFP912 Interchangeable Front Plate 2”
!
New
Just add front interchangeable plates: 1”, 2”, 3” & 4”
to mirror mount frame
The mirror mount can be configured as either
a left or right hand version by the user
Part No.
Description
E910
High Precision Mirror Mount Frame with Adjusters - no front plate optic holder
E911
High Precision Mirror Mount Frame with Interchangeable Front Plate 1”/25mm
E912
High Precision Mirror Mount Frame with Interchangeable Front Plate 2”/50mm
E913
High Precision Mirror Mount Frame with Interchangeable Front Plate 3”/75mm
E914
High Precision Mirror Mount Frame with Interchangeable Front Plate 4”/100mm
EFP911 Interchangeable Front Plate Optic Holder 1”/25mm
EFP912 Interchangeable Front Plate Optic Holder 2”/50mm
EFP913 Interchangeable Front Plate Optic Holder 3”/75mm
EFP914 Interchangeable Front Plate Optic Holder 4”/100mm
GMP SA
Av. des Beaumettes 17
1020 Renens
021 633 21 21
CHF*
360
560
590
670
740
180
170
310
420
www.gmp.ch
7
ELLIOT MARTOCK
Standard Kinematic Mirror Mount - 1”
Best va
lu
Mirror M e
ount
Model KMP121
The KMP121 is a very high quality utility mirror
mount available at excellent pricing. Stainless steel
adjusters act on a hardened insert to ensure smooth
movement with minimal wear.
Features include:
z Nylon-tipped set screw positively retains optics
z ¼ -80 adjusters
z 1” or 25mm optics
z Hex drive
z English & metric compatible
z Removable knobs z Angular range ±4 degrees
z Brass adjuster nuts z M4 clearance hole on base
KMP121
Standard 1” Mirror Mount
CHF 98*
Left & right-hand user configurable
E-900 High Precision Mirror Mount - 1”
The E-900 series are precision kinematic mirror
mounts using the highest quality hand-lapped
adjusters to give smooth and accurate adjustment
needed for the most exacting laser and optical
alignment.
Part No.
Description
CHF*
E-902 1” mirror mount R.H. version 490
E-901 1” mirror mount L.H. version 490
GMP SA
Av. des Beaumettes 17
z
z
z
z
z
z
z
z
z
z
Ultra-stable base
Excellent long term stability
Right hand (E902) and left hand (E901) versions
25 mm optic mounting (12.5 mm on request)
Soft mounting for optic protection
Nylon tipped clamping screw
Unique 0.25µm pitch highest quality hand-lapped
adjusters with approx 100 turns per inch thread
Hex drive adjusters with removable knurled knobs
3 x M6 mounting holes
1020 Renens
021 633 21 21
www.gmp.ch
8
ELLIOT MARTOCK
Fibre Launch Systems
Timewarp Autocorrelator
Device/Waveguide Manipulators
Very Small Micropositioners
Custom Alignment Systems
Optical Tweezer Systems
Terms and conditions:
All goods supplied are subject to our Terms and Conditions of Sale (copy available upon request, also available
on our web site). All prices shown exclude shipping and VAT/TVA charges which are dependent on your
destination country.
Euro prices listed in this brochure, shown as CHF*, are correct at time of printing. They are subject to exchange rate
fluctuations. We will acknowledge your order
with correct pricing.
For shipping destinations outside the EC the
customer will be liable for any local sales tax or import/excise duty applicable.
GMP SA reserve the right to change prices or specifications whenever necessary.
GMP SA
Av. des Beaumettes 17
1020 Renens
021 633 21 21
www.gmp.ch
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising