Wednesday, May 16, 2007 Page 1

Wednesday, May 16, 2007 Page 1
Wednesday, May 16, 2007
Set each of the
16 jumpers for
either balanced
or unbalanced.
Audio Cable
Audio Cable Audio Cable
Audio Cable
Audio Cable
2)DIN
1)9 Pin
9 Pin
2)26
Pin
26 Pin
5)Audio
Cable
MC-2020 rear panel
2)Din
Customer
Service
800-447-7204
Page 1
Wednesday, May 16, 2007
Each audio input can be
configured for either balanced
or unbalanced AES audio by
connecting 75 ohm cable to the
input BNC OR 3 wire audio
cable to the terminal block.
Relay closures occur
between point A and B
for each of the 21 relays.
Operation of the relay(s)
is determined by system
programming.
AES Reference
Time
Code
Input
Time
Code 1
output
Each audio output can be configured for
either balanced or unbalanced AES
audio by connecting 75 ohm cable to the
output BNC OR 3 wire audio cable to the
terminal block. The format must also be
selected by setting the jumper on the
opposite side of the panel.
Time
Code 2
Output
SMPTE and TTL
level alarms
Page 2
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement