The Audiobahn Way
To bring the product to market that excites the consumer through
sound and vision from an orientation of integrity and customer service. We
make you look as good as you sound. We strive to take car audio to an
extreme the world has never seen, and a world that never stops evolving.
Audiobahn was established in 1997 with one long-term goal in mind,
"Build it Bigger, Badder, & Better, and the people will take notice!" We
back this statement with an engineering team that has brought home several
Innovations, Design & Engineering Showcase Awards, and a marketing team
from around the world that spends countless hours developing our no
compromise products to satisfy the most discriminating enthusiasts.
Our global manufacturing facilities feature ISO9002 ratings (the highest
level of quality control awarded in the electronics manufacturing industry), fully
robotic assembly lines and a state of the art, California based R & D
Due to overwhelming response from our competitors, and our goal to
participate in even more events this year, we created *"TEAM AUDIOBAHN."
This organization is designed to create a support network along with shirts and
perks for team members. "TEAM AUDIOBAHN" is not only for the diehard
competitor, but also for anyone that loves car audio as much as we do. With
four levels of play, one is right for you to get started in the Audiobahn family.
Our Technical Department and entire staff look to strive above and
beyond the rest of the pack by going that extra mile to help you out. Whether
you happen to be a veteran competitor, or a beginner car audio enthusiast
who does not know a voice coil from a spider. We are all her to help you get
the best system you can with what you have.
Judge for yourself, and remember what it's all about, "If it's not
Bigger, Badder & Better, it's not Audiobahn." If audio is your life,
Audiobahn is the brand for you! We make you look as good as you sound.
People never stop trying to get the best product, so we will never stop making
*To learn more about "TEAM AUDIOBAHN" please give us a call, see our website at
www.audiobahn.com, or email us at team@audiobahn.com to learn about all the details.
Dear Customer,
Congratulations on your purchase of the worlds finest brand of car audio products. Here at
Audiobahn Inc. we are devoted to making our musical reproduction the vert best, and we are
pleased you have chosen our product. Through years of engineering expertise, hand
craftsmanship, and critical testing procedures, we have created a wide range of products that
reproduce music with all the clarity and richness you deserve.
For maximum performance we recommend you have your Audiobahn product installed by an
Authorized Audiobahn Dealer, as we provide specialized training through our Audiobahn
Installer Training Programs. Please read your warranty, keep your receipt, and original carton
for possible future use.
To get a free brochure on Audiobahn products in the US call (714) 988-0400 or e-mail us at
Continuous exposure to sound pressure levels over 100dB may cause permanent
hearing loss. High powered autosound systems may produce sound pressure levels
well over 135dB. Need we say more! Use common sense.
If after reading this manual you still have questions regarding your product, we
recommend that you see your nearest Audiobahn Dealer. A list of Authorized
Audiobahn Dealers can be found on our web page. If you need further assistance, feel
free to call us at (800) 488-8595 and ask for the Technical Department. Be sure to have
the model number, date of purchase, and invoice number available when you call.
The model number can be located on the outside of the carton. Record this in the space
provided below along with the date of purchase. It is a good idea to keep your receipt
with this as you will need it in the case of needing a warranty, repair service or
Model Number:___________________ Date of Purchase: _____________________
Features and Specifications
Chrome Basket
Carbon Injection Cone
Butyl Rubber Surround
2 Layer High-Temp ASV Voice Coil
4 Ohm Impedance
Removable Tweeter
Polyswitch Tweeter Protection Circuit
Standard and Custom Grilles 4” and Up
Complete with Mounting Hardware
Optional Replacement Silk Dome Tweeter (AST20V)
Power Handling
200 Watts RMS
180 Watts RMS
100 Watts RMS
100 Watts RMS
100 Watts RMS
100 Watts RMS
90 Watts RMS
80 Watts RMS
80 Watts RMS
80 Watts RMS
80 Watts RMS
60 Watts RMS
AS69V: 25Hz-20kHz
AS96V: 25Hz-20kHz
AS41V: 50Hz-20kHz
AS68V: 40Hz-20kHz
AS57PV: 60Hz-20kHz
AS65V: 50Hz-20kHz
AS62V: 50Hz-20kHz
AS50V: 60Hz-20kHz
AS46V: 60Hz-20kHz
AS64PV: 90Hz-20kHz
AS40V: 90Hz-20kHz
AS31V: 150Hz-20kHz
Speaker Size
AS69V: 6x9" 3-Way
AS96V: 6x9" 2-Way
AS41V: 4x10" 2-Way
AS68V: 6x8" / 5x7" 2-Way
AS57PV: 5x7" / 6x8" 2-Way Plate
AS65V: 6.5" 3-Way
Magnet Weight
AS69V: 40 oz.
AS96V: 40 oz.
AS41V: 18 oz.
AS68V: 18 oz.
AS57PV: 15 oz.
AS65V: 18 oz.
AS62V: 18 oz.
AS50V: 15 oz.
AS46V: 15 oz.
AS64PV: 10 oz.
AS40V: 15 oz.
AS31V: 10 oz.
AS69V: 95 dB
AS96V: 95 dB
AS41V: 93 dB
AS68V: 93 dB
AS57PV: 93 dB
AS65V: 94 dB
AS62V: 94 dB
AS50V: 93 dB
AS46V: 93 dB
AS64PV: 91 dB
AS40V: 93 dB
AS31V: 91 dB
AS62V: 6.5" 2-Way
AS50V: 5.25" 2-Way
AS46V: 4x6" 2-Way
AS64PV: 4x6" 2-Way Plate
AS40V: 4" 2-Way
AS31V: 3.5" 2-Way
2-Way Tweeter Option
Hole to line up when
replacing plug or tweeter
When using one of the AS series 2-way speakers, the tweeter is fully removable. When
removing the tweeter, make sure to replace the chrome plug in its place. This is needed for
proper operation of the speaker. To remove the plug or tweeter grip your fingers on the
outside of the tweeter or plug and gently pull up with a tilting action slightly from side to
side and it will pop out. To replace the plug or tweeter, line up the holes at the bottom of
the plug or tweeter with the markings on the cup on the speaker.
When using the tweeter installed in the speaker or mounted separately, the blue wire with
the black line is - (negative) and the solid blue wire is + (positive).
To mount the tweeter, use the tweeter as a template to mark out and cut a hole the diameter of the tweeter then, insert the tweeter then, place the supplied ring on the back of the
tweeter and screw it on clockwise to tighten the tweeter into its mounted position.
3-Way Tweeter Option
Removal of the 3-Way tweeter is the same
as the 2-Way setup on page 5.
Technical Support (800) 488-8595 / tech@audiobahn.com
Warning / Disclaimer
Investigate the layout of your automobile thoroughly before drilling or cutting any holes.
Take care when you work near gas tanks, gas lines, hydraulic lines, and electrical wiring.
Do not use the power amplifier unmounted. Attach the system securely to the automobile
to prevent damage, particularly in the event of an accident. Do not mount the system
so that the wire connections are unprotected or are subject to pinching or damage
from nearby objects.
The +12V DC power wire must be fused at the battery positive terminal connection.
Before making or breaking power connections at the system power terminals,
disconnect the +12V wire at the battery end. Confirm your radio/head unit and/or other
equiptment is turned off while connecting the input jacks and speaker terminals.
If you need to replace the power fuse, replace it only with a fuse identical to that
supplied with the system. Using a fuse of a different type or rating may result in damage to
this system which is not covered by the warranty.
Specifications are subject to change with out notice.
For the most updated Specifications call Audiobahn,
your local Authorized Audiobahn Dealer,
or check the Audiobahn web site.
Technical Support (800) 488-8595 / tech@audiobahn.com
Audiobahn Consumer
Product Warranty Policy
Audiobahn products are manufactured with the highest quality components and some of
the most advanced technology available. Because of this, we recommend that you have
your new products installed by an Authorized Audiobahn Dealer. (A list of Authorized
Audiobahn Dealers can be found on our web page).
Warranty Period: One year from the original date of purchase.
Warranty Coverage: This warranty covers manufacturer defects only. The warranty is
applicable to the original purchaser, and is non-transferable. You must provide a receipt
from an Authorized Audiobahn Dealer that shows the location of purchase, price paid,
and date of purchase.
(Products purchased by consumers from an Authorized Audiobahn Dealer outside the
United States are covered only by the Distributor of that specific country and are not
covered by Audiobahn).
Complete subwoofer enclosures (Audiobahn will replace defective subwoofers,
plexiglass, or neon only. Do not send the entire enclosure, unless the enclosure is
defective itself. You must receive prior authorization and an RA# before sending in any
complete enclosure).
(A list of Authorized Audiobahn Dealers can be found on our web page).
Any product not purchased from an Authorized Audiobahn Dealer (including Internet
Damage caused by abuse, misuse, accident, water / flood, or theft (including any
cosmetic damage to the body of the product)
Damage caused by improper installation
Any cost or expense related to removal or reinstallation
Any unauthorized services
Any product that has the serial number removed, altered, or defaced
Subsequent damage to any other components
Pinched, cut, or stripped wires / terminals
Any product that is new, and/or found to be in working condition
L.E.D. indicators on electronics (Audiobahn will only replace L.E.D.(s) found to be
defective at the time of purchase)
Technical Assistance (800) 488-8595 / tech@audiobahn.com
Warranty Continued
How to receive warranty service: Contact your local Authorized Audiobahn Dealer, or call Audiobahn at
(800) 488-8595 between the hours of 9:00 AM and 5:00 PM PST.
If you are having problems with your system, we recommend you check the product carefully and
thoroughly to confirm that the product truly has a manufacturer defect; as opposed to abuse, or other
components in the system causing the failure. This might include having an Authorized Audiobahn
Dealer look at the product to confirm the source of the problem. Any product found to have a
manufacturer defect will be replaced with a new piece of the same or similar model, or repaired at the
discretion of Audiobahn. Any product found to have no manufacturer defect will be returned to the sender
at their cost.
You must acquire a Return Authorization Number ( #) prior to returning ANY product to
Audiobahn. That Return Authorization Number (RA#) must be prominently and clearly marked on the
outside of the shipping carton, or product delivery will be refused (no exceptions will be made).
Please note: All shipping and handling (to and from) charges will be the sole responsibility of the
Please record and keep your Return Authorization Number (RA#) in the event that further communication
is required.
Return Authorization Number (RA#):
Date product was sent:
Contact Information
Audiobahn Headquarters
114 South Berry St.
Brea, CA 92821
Phone (800)488-8595 Fax. (714)988-0433
Pacific Coast Time : 9am-5pm Mon. - Fri.
Download PDF