VE.Bus BMS to BMS 12/200 alternator control cable

VE.Bus BMS to BMS 12/200 alternator control cable
13-05-2014
VE.Bus BMS to BMS 12/200 alternator control cable (ASS 030510100)
With this cable the charge control feature of the BMS 12/200 can be used together with the
VE.Bus BMS.
The BMS 12/200 will limit charge current by the alternator to a safe value, and and stop the charge
process in case of an alarm (the Li-ion battery is communicates with the VE.Bus BMS and the VE.Bus
BMS transmits to the BMS 12/200), see figure below:
VE.Bus BMS to BMS 12/200
alternator control cable
NOTE 1: The Li-ion battery and any loads powered by the Li-ion battery must not be connected to
ground.
NOTE 2: In this set-up the DC load output of the BMS 12/200 is not operational.
Please see the BMS 12/200 manual for details.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement