Becker SunWindControl SWC52 Sun and wind controller Assembly and Operating Instructions

Below you will find brief information for Sun and wind controller SunWindControl SWC52. The SWC52 is a sun and wind controller for your awnings. This device is suitable for dry rooms only and can be operated manually at any time. It includes a battery-powered display that retains its information, even when the operating device is removed, allowing you to program it anytime. This instruction manual covers important information for fitters, electricians, and users, and should be retained for future reference.

PDF Download
Document
SunWindControl SWC52 Assembly and Operating Instructions | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • Sun and wind controlled
  • Manual control
  • Battery powered
  • Group control
  • Programmable
  • Test mode
  • Alarm signal

Frequently asked questions

The SWC52 automatically controls your awning based on the amount of sunlight and wind speed. It can be programmed to retract or extend the awning based on specific settings like time, sunlight intensity, and wind strength.

Yes, you can operate the SWC52 manually at any time.

The SWC52 is battery-powered, so you can still program it even with the power disconnected. The display will retain its information.

You can adjust the time and date using the TIME/DATE menu on the device.

Yes, you can program specific retraction times using the PROGRAM menu.

Yes, you can adjust the sensitivity of the sensors using the SETTING menu.

To activate the TEST mode, press and hold the OK button for approximately 5 seconds.

The alarm signal indicates if there is a continuous switching signal at the group control inputs for more than 5 seconds.
Preparing document for printing…
0%