RMB/6 and RMB/12 Non-Modular Hot Runner

RMB/6 and RMB/12 Non-Modular Hot Runner
RMB/6 and RMB/12 Non-Modular
Hot Runner Controllers
Hot Runner Temperature Control
for 6 or 12 Zones
Athena’s new RMB/6 and RMB/12 non-modular
hot runner control systems offer 6 zones and
12 zones of integrated control in a compact package
design at an affordable price. The units are equipped
with a full featured user-friendly operator keypad/LCD
display and discrete indicators of heat, boost, closed
loop, open loop, idle, and alarm for system status.
▲ Compact package design
▲ 6 or 12 zones of control with 15 amps per zone
▲ Adjustable set point limits
▲ “Boost” mode for temporary % of power
output increase
▲ Accepts “J” or “K” thermocouple input, grounded
or ungrounded
▲ Remote input standby function
▲ CompuStep® bake out feature prevents moisture
at start-up
▲ Fan cooled
▲ Built-in loop break, short, open, and reverse
thermocouple
▲ Limited Two Year Warranty–Consult Factory
▲ Remote alarm output contacts
▲ Easily serviceable with optional spare parts
Ordering Information
R M B
0
6 = 6 zone
12 = 12 zone
Communications
Market
Zone Count
0 = None
D = Domestic
X = Export
E = CE
06 = 6
12 = 12
Future
Spare Parts
Triac Driver Board
626A064U01 (includes triac driver board, triac and heat sink pad)
Fuses
210B001U01 (15A, 3AB)
Options
Consult Factory
Technical Specifications
Technical Operating Limits
RMB/6
Input Specifications
RMB/12
240 Vac +10/-20%
85 to 265 Vac
Nominal 100 to 240 Vac
32 to 122°F (0 to 50°C)
Absolute Voltage Limits
Input Line Voltage
Ambient Temperature
Relative Humidity
Tolerance
Frequency
90% non-condensing
50-60 Hz
Performance Specifications
Auto Control Mode
Control Accuracy
Temperature Stability
Calibration Accuracy
Power Response Time
Process Sampling
°F/°C
CompuStep® System
Control Mode
Duration
Output Voltage
Override Temperature
Operation Mode Priority
CompuCycle® system
(PWM, 200 msec)
± 0.1°F (± 0.1°C) dependent on the
total thermal system
± 0.5% of full scale over the
ambient range
Better than 0.2% of full scale
Better than 400 ms
100 ms
Field Configurable
PWM
Approximately 5 min.
PWM % with zero cross
200°F (93°C)
a: T/C open, T/C reverse,
Shutdown and open heater
override CompuStep®
b: Manual mode overrides
T/C open, T/C reverse
External T/C Resistance
T/C Isolation
Cold Junction
Compensation
Input Impedance
Input Protection
Input Dynamic Range
Common Mode
Rejection Ratio
Power Supply
Rejection Ratio
Type “J” or “K” grounded
or ungrounded
Max 100 ohms for rated accuracy
Channel to channel
common mode
voltage ± 1.5 Vdc
Automatic, better than 0.02°F/°F
(0.03°C/°C)
10 megohms
Diode clamp RC filter
Greater than 999°F (537°C)
Greater than 100 dB
Greater than 70 dB
Output Specifications
Voltages
Power Capability
Overload Protection
Power Line Isolation
Output Drive
240 Vac nominal, single
phase 100 Vac available
15 amperes, 3600 watts @
240 Vac per zone
Type (ABC) fuses
Optically and transformer
isolated from ac lines.
Isolation voltage is greater
than 2500 volts
Internal solid state triac
Human Interface (HMI)
Dimensions
Height
Width
Depth
Weight
Thermocouple
(T/C Sensor)
RMB/6
RMB/12
6˝
17-1/4˝
13-1/2˝
17 lbs.
6˝
22-1/4˝
13-1/2˝
20 lbs.
Athena Controls, Inc.
5145 Campus Drive • Plymouth Meeting, PA 19462-1129 USA
Toll free: 1.800.782.6776 • Tel: 1.610.828.2490
Fax: 1.610.828.7084 • E-mail: [email protected]
www.athenacontrols.com
Operator Keypad
RMB/6: 1 Keypad
RMB/12: 2 Keypads
8 Control Switches, 6 Status LED’s per zone
Degrees “F” and “C” Status indicators
LCD Display, 2 Line x 24 Characters
©Copyright, Athena Controls, Inc., 2013
Printed in USA
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement