HD300X - Optoma
www.optoma.eu
HD300X
Set your sights on the HD300X for the greatest
1080p 3D home entertainment experience!
Using next-generation frame interpolation technology - PureMotion4, the HD300X gives you silky smooth video performance; while the immersion & excitement created
by a massive 120” 3D projection makes you feel like you are part of the action. With 1600L & 8,000:1 contrast, whether you just fancy a relaxed Movie night; inviting your
mates round to watch the big match or immersing yourself in adrenaline-pumping 3D games, the HD300X is the perfect choice.
5
HD300X
HD300X Specifications Highlights
Full HD
Native 1080p (1920 x1080)
ANSI Contrast
400:1 ANSI
Dynamic Contrast
8000:1
Brightness1
1600 ANSI Lumens
Audible Noise
27dB
Throw Ratio
1.5 ~ 1.8
Lamp Life2 (ECO)
4000 Hours
Inputs
Output
Video Compatibility
3D Compatibility
Dimensions
Weight
3D Viewing
Warranty
EAN Number
Backlight Remote Control
2 x HDMI 1.4a (3D Supported),
Component, VGA (PC\SCART),
Composite
3D Sync Out (3-Pin VESA)
1080p, 1080i 720p, PAL, NTSC, SECAM
Side-by-Side:1080i50 / 60, 720p50 / 60
Frame-pack: 1080p24, 720p50 / 60
Over-Under: 1080p24, 720p50 / 60
380 x 313 x 122mm
4.5 kg
Requires the Optoma 3D-RF System available separately. (Additional 3D-RF
Glasses are also available)
(DLP-Link shutter-glasses are
also supported)
Warranty may vary by country. Please see
or ask your local supplier for details
5060059045754
For full specifications please visit the website at: www.optoma.co.uk
1
3
4
5
2
6
7
9
8
Connections
1
2
3
4
5
6
7
8
9
3D Sync Out (VESA)
+12V Trigger
2 x HDMI (1.4a 3D)
VGA (PC/YPbPT)
Component Video
Composite Video
RS232
Kensington™ Lock
Power
Distance Table
Projection
Distance (m)
Horizontal Image
Size (m)
Vertical Image
Size (m)
Diagonal Image
Size (m)
Diagonal Image
Size (inch)
Image Offset (m)
1.20
2.00
2.50
3.00
4.00
5.00
0.80
1.33
1.67
2.00
2.67
3.33
0.45
0.75
0.94
1.13
1.50
1.88
0.92
1.53
1.91
2.29
3.06
3.82
36.14
60.23
75.29
90.34
120.46
150.57
0.07
0.12
0.15
0.18
0.24
0.30
Optoma Europe Limited 42 Caxton Way, Watford Business Park, Watford, Hertfordshire. WD18 8QZ
Tel: +44 (0) 1923 691800 Fax: +44 (0) 1923 691888
www.optoma.eu
†
“ANSI Contrast” is a recognised contrast measurement technique as described in the standard IEC 61947-1
V5- 29/05/12
Copyright © 2012, Optoma Europe Ltd. All other product names and company names used herein are for identification purposes only and may be trademarked or registered trademarks of their respective owners. 1Brightness and lamp lifetime will vary depending on selected projector mode, environmental conditions and usage. As is common with all lamp
based projectors, brightness will decrease over the lamp lifetime. 2Typical lamp life achieved through testing. Will vary according to operational use and environmental conditions. Errors and omissions excepted, all specifications are subject to change without notice. DLP®, BrilliantColor™ and the DLP logo are registered trademarks of Texas Instruments.
Some images may be simulated. All images of products are for representation purposes only. Whilst every care is taken to provide accurate images of our products, actual products may differ slightly. Some product images may have been digitally altered by us to add an Optoma logo to the front panel. Optoma reserves the right to amend or alter actual product or
product images without notice. Some images may be simulated.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement