This installation should be made by a qualified

This installation should be made by a qualified
The lightning flash with an arrowhead symbol, within an equilateral
triangle is intended to alert the user to the presence of uninsulated
dangerous voltage within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
INFORMATION - This equipment has been tested and found to comply with
limits for a Class A digital device, pursuant to part 15 of the FCC Rules & CE Rules.
These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
his own expense.
WARNING - Changes or modifications not expressly approved by the
manufacturer could void the user’s authority to operate the equipment.
CAUTION : To prevent electric shock and risk of fire hazards:
◆ Do NOT use power sources other than those specified.
◆ Do NOT expose this appliance to rain or moisture.
This installation should be made by a qualified service person and
should conform to all local codes.
1
High Sensitivity Day & Night Power Zoom Color Camera
Features
Warning
The camera requires regular maintenance.
23x / 30x Optical Zoom
Day & Night
The built-in 23x / 30x optical zoom lens is a
highly durable component. It features auto
focus, auto iris, and zoom functions.
The camera automatically determines whether
it is night time or day time, selecting operating
mode automatically. The camera operates in
color mode during day light conditions and BW
mode in night conditions for clearer
identification.
DNR (Digital Noise Reduction)
DIS(Digital Image Stabilizer)
The amount of low illuminance noise
has been significantly reduced, and the
signal-to-noise ratio (S/N) as well as
horizontal resolution have been improved,
resulting in a clear and sharp image
display even in the dark.
The DIS function can compensate for
vibration of the camera. so it helps you
obtain more stabilized image under the
shaking conditions.
Fine Picture Quality under Ultra
Contact an authorized technician for maintenance and/or servicing.
Do not continue to use if malfunctioning.
Prolonged use of the camera in abnormal operating conditions
(produces smoke, overheats, etc.) may result in a fire.
Do not Install the camera on a surface that can not support it.
Installation on an unsuitable surface may cause the camera to fall
and/or other hazards.
Do not handle the power cable with wet hands.
Motion Detection
May result in an electric shock.
Once motion is detected, the camera sends
an alert signal to the processing unit, which,
if used in conjunction with an optional
alarm, can provide effective surveillance of
your property.
Do not disassemble the camera.
May result in a fire, electric shock, and/or other hazards.
Low Lighting
1/4" high density CCD allows the user to
capture bright, high-quality images under
ultra low lighting conditions.
Control via OSD Menu and RS-485
High Resolution
Miscellaneous Functions
Featuring 520TV line horizontal resolution in
color mode and 570TV line horizontal
resolution in BW mode, the camera features
Sony's 410,000 pixel CCD and captures
clean, noiseless, high-quality images.
Other miscellaneous functions of the
camera include privacy zone masking,
digital zoom, line lock synchronization
(INT/LL), freeze, horizontal inversion, and
user-configured presets.
The OSD menu and RS-485 pins allow for
remote control of the camera.
The user can also directly control the lens
using external control connection.
High Sensitivity Day & Night Power Zoom Color Camera
2
Do not place the camera in the vicinity of inflammables.
May result in a fire and/or other hazards.
3
High Sensitivity Day & Night Power Zoom Color Camera
Operating Your Camera
Menu Setup
Menu Configuration
Use the six buttons on back of the camera.
1. Press the SET button to access the main setup mode.
•Main setup menu is displayed on the monitor screen.
2. Select the desired feature using the UP or DOWN button.
•Each pressing of the UP or DOWN button moves the indicator to the
next or previous feature.
•Move the arrow indicator to the desired feature item.
High Sensitivity Day & Night Power Zoom Color Camera
16
17
High Sensitivity Day & Night Power Zoom Color Camera
Operating Your Camera
•FAST: To move zoom fast.
•SLOW: To move zoom slowly.
Note
ZOOM POS INIT: Moves to the controlled ZOOM position when the
power truned on and is a function of the initial ZOOM
position control.
• The 'ZOOM SPEED' mode cannot be used if 'MODE' is set to 'AUTO' and
'ZOOM TRK' is 'ON'.
D-ZOOM: Configure magnification limit from x2~x10 using this feature.
Position the indicator over 'D-ZOOM' using the UP or DOWN
button. Set 'D-ZOOM' to 'ON' and press the SET button to confirm.
LENS INIT : Use this feature to initialize the lens. Position the indicator
over LENS INIT. using the UP or DOWN button. Press
the SET button to confirm.
•Set 'ZOOM LIMIT' to the desired level using the
LEFT or RIGHT button.
DISP ZOOM MAG: Use this feature to display the current zoom magnification
level on screen. Position the indicator over 'DISP ZOOM
MAG' using the UP or DOWN button. Then set to ON
using the LEFT or RIGHT button.
END: To revert to the main setup menu.
High Sensitivity Day & Night Power Zoom Color Camera
26
27
High Sensitivity Day & Night Power Zoom Color Camera
Operating Your Camera
•A.FLK (NTSC: 1/100, PAL: 1/120): Flicker-free mode
•ESC: Automatic shutter speed setting (optimal)
•MANUAL: Manual shutter speed setting
2. If you choose ‘MANUAL’, select the optimal shutter speed.
. In MANUAL mode, the optimal shutter speed needs to be designated.
Select from 1/60 to 1/120,000 (NTSC) or from 1/50 to 1/120,000 (PAL).
* 'Sens-Up' mode can be configured manually (2x to 128x).
. Verify changes made to the shutter speed by referencing to changes in
on screen brightness.
•HIGH
•MIDDLE
•LOW
•OFF
: Wide range gain value adjustment
: Middle range gain value adjustment
: Narrow range gain value adjustment
: Disabled
DNR(Digital Noise Reduction): On screen noise reduction.
1. Position the indicator over 'DNR' using the UP or DOWN button.
2. Set 'DNR' to the desired mode using the LEFT or RIGHT button.
3. Press the SET button to complete.
Note
• Image may become unstable if the camera is set to 'ESC' mode and
faces a strong fluorescent light.
• Under 'ESC' mode, the brightness can be adjusted using the LEFT or
RIGHT button.
• The WDR feature is not available under MANUAL mode.
• Sens-up is disabled under 'MANUAL' or 'A.FLK' mode.
High Sensitivity Day & Night Power Zoom Color Camera
AGC (Auto Gain Control): For brighter images.
1. Position the indicator over 'AGC' using the UP or DOWN button.
2. Set 'AGC' to the desired mode using the LEFT or RIGHT button.
30
•LOW
•MIDDLE
•HIGH
•OFF
: Low noise reduction
: Medium noise reduction
: High noise reduction
: Disabled
31
High Sensitivity Day & Night Power Zoom Color Camera
Operating Your Camera
•PRESET NO: Up to eight different preset configurations are supported.
•PRESET CLEAR: Clear configured preset.
•PRESET MODE: Configure initial settings under FOCUS, EXPOSURE, etc.
•END: Revert to the SPECIAL SETUP menu.
•PRESET SAVE: Save configured preset.
PRIVACY: Mask privacy area using this feature. The mask area expand/contract
upon the zoom position.
High Sensitivity Day & Night Power Zoom Color Camera
34
35
High Sensitivity Day & Night Power Zoom Color Camera
Operating Your Camera
•GROUP SEL : Choose up to eight groups. Each group can consist of four
mask areas.
•MASK COLOR : Adjust desired mask color level.
•AREA SEL
:Configure eight mask areas.
•AREA MODE : Mask area display.
•TOP
: To move the mask area up.
•BOTTOM
:To move the mask area down.
•LEFT
: To move the mask area left.
•RIGHT
:To move the mask area right.
DIS : The DIS mode can compensate for vibration of the camera.
Note
• When DIS is operating, D-ZOOM does not operate.
DAY/NIGHT : Select from COLOR, BW or AUTO modes.
•COLOR : Color mode.
•B/W
: BW mode.
•AUTO : The camera automatically detects lighting conditions and selects the
mode accordingly.
High Sensitivity Day & Night Power Zoom Color Camera
36
SYNC : Two synchronization modes are available INTERNAL and EXTERNAL
LINE-LOCK. In LINE-LOCK mode, it synchronizes the camera’s
video out signal to the external SYNC signal.
•INT : Internal synchronization
•LL : External line-lock synchronization
.If you choose ‘LL’, you can adjust the
desired phase. Press the SET button.
.You can adjust the desired phase from
0 to 359.
37
High Sensitivity Day & Night Power Zoom Color Camera
Troubleshooting
Refer to the following table if you are experiencing trouble with your camera
Contact an authorized technician if the table does not provide you with
asolution to the trouble.
High Sensitivity Day & Night Power Zoom Color Camera
40
41
High Sensitivity Day & Night Power Zoom Color Camera
Specifications
3.84
88.4
High Sensitivity Day & Night Power Zoom Color Camera
3.0
3.4
42
43
High Sensitivity Day & Night Power Zoom Color Camera
MEMO
Model : DNR230OZ
DNR300OZ
High Sensitivity Day&Night
Power Zoom Color Camera
Instruction Guide
GENIE CCTV LTD.
CCTV House, City Park, Watchmead, Welwyn Garden City, Hertfordshire, AL7 ILT
Tel : +44 (0) 1707 330541 Fax : +44 (0) 1707 330543
www.geniecctv.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising