baileysonline.com • 1-800-322-4539 Bailey`s Industrial 1-888

baileysonline.com • 1-800-322-4539 Bailey`s Industrial 1-888

Sale Ends March 2, 2017!

baileysonline. com • 1-800-322-4539

Bailey’s Industrial 1-888-465-8227

Operador en Español disponible: 1-888-322-1215!

8" & 12" Brush Chippers

We have a large selection of Morbark 12" chippers available right now! Morbark 12" brush chippers are ideal for residential tree services, utility line clearing crews and municipality work. Morbark 12" brush chippers are compact and powerful, easy to tow, and simple to operate and maintain. Morbark builds these chippers in both disc and drum designs, with a variety of engine options, as well as track and PTO versions. These chippers are also available with several bolt on options such as the patented Chip Safe operator safety shield and hydraulic winch.

2016 Morbark Beever M8D Brush Chipper

2015 Morbark Beever M12D Brush Chipper

• 8" Disc Chipper • Engine: 44HP Kabota • Chipper Disc: 28" diameter x 1-1/4" thick (2) knife disc • Gross Weight

(GVWR): 2,6000 lbs • Hours: New • Woodland, CA

MOR M8D 86364

. . . . . . . . . . . . . . . Call an Expert at 1-888-465-8227

2016 Morbark Beever M12R Brush Chipper

• 12" Disc Chipper • Engine: GM 130HP Vortec V-6 Gasoline

• Chipper Disc: 37" Diameter Disc x 2" Thick Disc with (4)-1/2" x

5"x 7-1/4" Staggered dual edged knives - 4 Bolt on full length chip throwing paddles • Gross Weight (GVWR): 5,744 lbs

• Hours: New • Woodland, CA

MOR M12D 11377

. . . . . . . . . . . . . . . Call an Expert at 1-888-465-8227

2017 Morbark Beever M12R Brush Chipper

• 12" Drum Chipper • Engine: 130 HP GM Vortec Gasoline -

CARB Cert • Chipper Drum: 14-1/2” wide x 21-3/8” Diameter, 2 knife • Gross Weight (GVWR): 5,666 lbs. • Options: Dual Feed

Rolls, 235/80R 16”-10 ply tires • Hours: New • Woodland, CA

MOR M12R 72145

. . . . . . . . . . . . . . . Call an Expert at 1-888-465-8227

2017 Morbark Beever M12R Brush Chipper

• 12" Drum Chipper • Engine: 130HP Cummins Diesel (Tier 4-

Interim) CARB Registered • Chipper Drum: 14-1/2” Wide x 21-3/8”

Diameter, 2 knife drum • Options: Dual Feed Rolls, 5000 lb Hyd

Winch Package • Gross Weight (GVWR): 6,500 lbs

• Hours: New • Woodland, CA

MOR M12R W TBD . . . . . . . . . . . . . . . Call an Expert at

1-888-465-8227

2017 Morbark Beever M12RX Brush Chipper

2

• 12" Drum Chipper • Engine: 130HP Cummins Diesel (Tier 4-

Interim) CARB Registered • Chipper Drum: 14-1/2” Wide x 21-

3/8” Diameter, 2 knife drum • Gross Weight (GVWR): 6000 lbs. •

Options: Dual Feed Rolls • Hours: New • Woodland, CA

MOR M12R TBD

. . . . . . . . . . . . . . . Call an Expert at 1-888-465-8227

• 12" Drum Chipper • Engine: 74HP Perkins Diesel (Tier 4-Final)

CARB Registered • Chipper Drum: 14-1/2” Wide x 21-3/8”

Diameter, 2 knife drum • Gross Weight (GVWR): 5,500 lbs •

Options: Single Top Feed Wheel • Hours: New • Woodland, CA

MOR M12RX TBD1 . . . . . . . . . . . . . Call an Expert at

1-888-465-8227

www.baileysonline.com / E-mail [email protected]

15" Brush Chippers

We have a nice selection of Morbark 15" chippers available right now! Morbark 15" brush chippers are ideal for residential tree services, utility line clearing crews, maintenance contractors and municipality work. Morbark 15" brush chippers are designed for high capacity, high production chipping. They are easily towable and simple to operate and maintain. Morbark builds these chippers in both single and double feed wheel designs, with a variety of engine options, as well as track and PTO versions. These chippers are also available with several popular options such as the patented Chip Safe operator safety shield and hydraulic winch.

2016 Morbark Beever M15R Brush Chipper 2017 Morbark Beever M15R Brush Chipper

• 15" Drum • Engine: 147HP Perkins Diesel (Tier 4 Final) Carb Tag

Included • Chipper Drum: 23-3/4" W x 30" D - 4 Knife drum with replaceable knife pockets • Gross Weight (GVWR): 9,680 lbs. • Options:

Dual Infeed Wheels - Wireless Remote Control with Tethered Backup

System, Bottom Clean Out Door on Chip Chute, Hyd Swivel Chip Chute with 360 continuous rotation • Hours: New • Woodland, CA

MOR M15R 25611

. . . . . . . . . . . . . . . Call an Expert at 1-888-465-8227

• 15" Drum Chipper • Engine: 160HP Cummins Diesel (Tier 4

Interim) Carb Registered • Chipper Drum: 23-3/4" W x 30" D - 4

Knife drum with replaceable knife pockets • Gross Weight

(GVWR): 9,480 lbs. • Options: Dual Feed Rolls, Hydraulic Swivel

Chip Chute Discharge, 5000 lb Hyd Winch Package • Hours: New

• Woodland, CA

MOR M15R 25704

. . . . . . . . . . . . . . . Call an Expert at 1-888-465-8227

2015 Morbark Beever M15RX Brush Chipper

• 15" Drum Chipper • Engine: 142HP Perkins Diesel (Flex Tier 3)l

• 23-3/4 wide x 21-1/8" Diameter, 2 knife • Gross Weight

(GVWR): 7,846 lbs. • Dual Feed Rolls, Diamond Plate Fenders

& Tool/Battery Box, 5000Lb Hyd Winch • Hours: New

• Location: Centralia, WASH

MOR M15RX 40952 Call an Expert at 1-888-465-8227

Looking for larger used industrial chippers and grinders? Call Phil Harless.

Phil has over 20 years of selling and servicing

Morbark industrial chippers and grinders, and Bailey’s has access to several used machines from around the

U.S. Phil can be reached at

(530) 908-3296.

7am - 5pm PST Consumer: 1-800-322-4539 / Bailey’s Industrial: 1-888-465-8227

3

18" & Track Mounted Brush Chippers

Designed for big time production. Morbark 18" brush chippers are ideal for commercial and residential tree services, utility line clearing crews, land clearing operations, maintenance contractors and municipality work. Morbark 18" brush chippers are designed for high capacity, high production chipping, including biomass production. Morbark offers these chippers with a wide variety of options, including grapple loaders for high production feeding. These chippers are also available in track versions for difficult terrain.

2016 Morbark Beever M18RX Brush Chipper

2017 Morbark Beever M18R Brush Chipper

• 18" Drum Chipper • 160HP Cummins Diesel (Tier 4 Interim) - Carb

Registered • Chipper Drum: 23 2/3" wide x 37 1/2" Diameter, 4 knife with replaceable knife pockets • Gross Weight (GVWR): 9,960 lbs • Options:

Dual Infeed Wheels, Diamond Plate Fenders and Tool/Batt Box, Bottom

Clean Out Door on Chip Chute, Hyd Swivel Chip Chute with 360 continuous rotation • Hours: New • Woodland, CA

MOR M18RX 52144 Call an Expert at 1-888-465-8227

• 18" Drum Chipper • Engine: 225HP Caterpillar T4 Final- CARB

Registered • Chipper Drum: 23-3/4” Wide x 37-3/8”” Diameter, 4 knife drum with replaceable knife pockets • Gross Weight (GVWR): 14,500 lbs

• Options: Dual Feed Rolls, Hyd Swivel Chip Chute Discharge, 5000Lb

Hyd Winch Package, Remote Control • Hours: New • Woodland, CA

MOR M18R TD TBD Call an Expert at 1-888-465-8227

2017 Morbark Beever M12R Track Chipper w/ Trailer 2017 Morbark Beever M15R Track Brush Chipper

4

• 12" Track Mounted Drum Chipper on Versatility Trailer • Engine: 130HP

Cummins Diesel (Tier 4 Interim) DOORS Registered • Chipper Drum: 14-

1/2" W x 21-3/8" D 2 knife • Gross Weight (GVWR): 9,000 lbs. • Options:

Dual Feed Rolls, Hydralic Swivel Chip Chute Discharge, 5000 lb. Hyd

Winch Package, Full Remote Control • Hours: New • Woodland. CA

MOR M12R T 72286 Call an Expert at 1-888-465-8227

• 15" Track Drum Chipper • 160HP Cummins Diesel (Tier 4-Interim)

Carb/DOORS Registered • Chipper Drum: 23-3/4" Wide x 30" Diameter

4 Knife drum with replaceable knife pockets • Gross Weight (GVWR):

13,000 lbs • Options: Dual Feed Rolls, Hydraulic Swivel Chip Chute

Discharge, 5000 lb. Hyd Winch Package • Hours: New • Woodland, CA

MOR M15R T TBD

. . . . . . . . . . . . . . . . . . . . . Call an Expert at 1-888-465-8227 www.baileysonline.com / E-mail [email protected]

Track Mounted Brush Chippers

Morbark track mounted brush chippers are designed to access remote chipping locations such as forest thinning work, utility line clearing and fuel reduction projects. Morbark track brush chippers are designed for high capacity, high production chipping. Morbark

12" and 15" track chippers are designed for hand feed applications, 20" track chippers are also available and are designed for mechanically fed situations. These chippers are available with several popular options such as the patented Chip Safe operator safety shield and hydraulic winch.

2017 Morbark Beever M18R Track Brush Chipper 2016 Morbark Beever M20R Forestry Chipper

• 18" Track Mounted Drum Chipper • Engine: 275HP Caterpillar T4 Final

DOORS Registered • Chipper Drum: 23-3/4” Wide x 37-3/8”” Diameter 4 knife drum with replaceable knife pockets • Gross Weight (GVWR): 16,500 lbs. • Options: Dual Feed Rolls, Hyd Swivel Chip Chute Discharge, 5000Lb

Hyd Winch Package, Remote Control • Hours: New • Woodland. CA

MOR M18R T TBD

. . . . . . . . . . . . . . . . . . . . . Call an Expert at 1-888-465-8227

• 20" Track Forestry Chipper • Engine: 400HP CAT Diesel (Tier 4 Final) •

Chipper Drum: 33 3/8" Wide x 36" Diameter - 6 Knife Advantage 3 Drum •

Gross Weight (GVWR): 26,000 lbs • Options: Fully Remote Control with tethered back-up. Live In-Feed Deck • Hours: New • Woodland, CA

MOR M20R 90458

. . . . . . . . . . . . . . . . . . . . . Call an Expert at 1-888-465-8227

Stump Grinders

Bailey's is proud to offer the Morbark stump grinder line for Northern California, Northern Oregon and Washington. Morbark started making stump grinders a few years ago, and they have been a big hit in the tree care industry. All Morbark stump grinders are manufactured in their huge factory in Winn,

Michigan. Most components (except the engines) are manufactured in house, with machinist and engineers with decades of experience. Morbark stump grinders are built just like their chippers and are known for their toughness, productivity and simplicity.

2014 Morbark D 52 SPH Stump Grinder

2014 Morbark D 52 SPH Stump Grinder

• Engine: 49HP Caterpillar Diesel (C2.2 Tier 4 Interim) • Grinder Wheel:

3/4" Wheel with 24 Tomohawk Teeth • Gross Weight (GVWR): 2,720 lbs.

• Options: Dual Wheel Package • Hours: Used • Woodland, CA

MOR D 52 SPH 0173 . . . . . . . . . . . . . . . . . . . . . Call an Expert at

1-888-465-8227

• Engine: 49HP Caterpillar Diesel (C2.2 Tier 4 Interim) • Grinder Wheel:

3/4" Wheel with 24 Tomohawk Teeth • Gross Weight (GVWR): 2,720 lbs.

• Options: Dual Wheel Package • Hours: New • Location: Centralia, WA

MOR D 52 SPH 0177 . . . . . . . . . . . . . . . . . . . . . Call an Expert at

1-888-465-8227

7am - 5pm PST Consumer: 1-800-322-4539 / Bailey’s Industrial: 1-888-465-8227

5

Stump Grinder Teeth

SAVE

on These Popular Greenteeth Kits

& Greenteeth Components Online!

Greenteeth Stump Cutter Tooth Inserts

If you’re spending time battling stripped allen bolts, broken and bent teeth, as well as changing teeth too often, take a look at this solution. The Greenteeth design is superior because the carbide cutting teeth are easily replaced by simply removing the cutting head only. They can also be rotated twice to expose a total of 3 fresh cutting surfaces, allowing even more cutting life from each tooth. Greenteeth are designed to fit on all cutting wheels that use standard or heavy-duty teeth and pockets. No gauging required! All you need to do is purchase a set of pockets and bolts and you’re ready to go. Greenteeth are available in two styles, standard and deep dish. Standard dish teeth are designed for machines that may encounter rocky soil.

Deep dish teeth are concaved 4 times more than standard dish teeth. This gives the tooth a better

“ shearing” action. Deep dish teeth work very well in clean soil conditions, especially when cutting gummy woods like pine, but they will dull quicker in abrasive conditions. We have compiled a

list of the most popular machine setups below, but more are available online. Individual

Greenteeth, pockets and LP bolts are also available online.

All Components

Available Separately on Our Website!

CARLTON COM PLETE KITS — M any more available at BAILEYSONLINE. COM

Item No.

TT7 162210

TT9 282210

TT9 282210

GT9 442215

M achine Set Up for M odel

2100XP Self Propelled

3500D Tow Behind

4400/5300/SP7015 Self Propelled

SP7500 Tow Behind

Total Teeth & Pockets Angled

20 (700 Series) 16

32 (900 Series) 28

32 (900 Series)

48 (1100 Series)

28

44

RAYCO COM PLETE KITS — M any more available at BAILEYSONLINE. COM

Item No.

TT5 044038

TT7 066038

TT7 126012

TT7 126010

TT9 126015

M achine Set Up for M odel

RG 13 Series II Walk Behind

RG 20/25 HD Walk Behind

RG 1625 Super Jr Self Propelled

RG 1635 Super Jr Self Propelled

RG 50 Self Propelled

Total Teeth & Pockets Angled

8 (500 Series) 4

12 (700 Series)

18 (700 Series)

6

12

18 (700 Series)

18 (900 Series)

12

12

VERM EER COM PLETE KITS — M any more available at BAILEYSONLINE. COM

Item No.

TT7 124012

TT9 164012

TT9 262234

TT9 204010

M achine Set Up for M odel

SC 252 Self Propelled

SC 352 Self Propelled

SC 502/602 Tow Behind

SC 665A Tow Behind

Total Teeth & Pockets Angled

16 (700 Series) 12

20 (900 Series)

30 (900 Series)

24 (900 Series)

16

26

20

Straight Reverse

2 2

2 2

2

2

2

2

LP bolts

2-1/2" (1" Wheel)

2-1/2" (1" Wheel)

2-1/2" (1" Wheel)

3" (1-1/2" Wheel)

Reg.

SALE!

$379. 99 $359. 99

$669. 99 $629. 99

$669. 99 $629. 99

$1, 249. 99 $1, 179. 99

Straight Reverse

4 0

6

6

0

0

6

6

0

0

LP bolts

1-3/4" (3/8" Wheel)

1-3/4" (3/8" Wheel)

2" (1/2" Wheel)

2-1/2" (1" Wheel)

3" (1-1/2" Wheel)

Straight Reverse

4 0

4

2

4

0

2

0

LP bolts

2" (1/2" Wheel)

2" (1/2" Wheel)

2-1/4" (3/4" Wheel)

2-1/2" (1" Wheel)

Reg.

SALE!

$149. 99 $139. 99

$239. 99 $225. 49

$349. 99 $329. 49

$359. 99 $339. 99

$409. 99 $389. 99

Reg.

SALE!

$319. 99 $299. 99

$449. 99 $425. 99

$669. 99 $635. 99

$539. 99 $509. 49

Rayco Teeth Work on Virtually Every

Stump Grinder Made

Rayco Stump

Cutter Teeth

As Low As

Reg.

$

13

99

$

11

99

Upgrade your old two piece stump cutter teeth to Rayco’s Super Tooth. The patented single-piece design tooth is made out of high-alloy steel and offers superior tooth support with less twisting, bending, and breaking. Rayco’s Super

Tooth has a large mounting surface which virtually eliminates gouged cutter wheels, elongated bolt holes and all around cutter wheel wear associated with other cutters. Not only will you get greater service life out of your grinder, you’ll see a definite increase in your grinders performance. There are 6 different types to match almost every make and model.

M ix or match for quantity discounts!

RST 3144C

Counter Bored

Straight

RST 2933T

Threaded

Angled

6

Item No.

RST 2933C

RST 2933T

RST 3144C

RST 3144T

RST 20432C

RST 20432T

RST 2933C

Counter Bored

Angled

RST 3144T

Threaded

Straight

Description (Supertooth) SALE!(1-24)

Angled Supertooth Counter Bored

(Reg. $13.99 )

. . . . . . . . ea.

Angled Supertooth Threaded

(Reg. $13.99)

. . . . . . . . . . . . ea.

Straight Supertooth Counter Bored

(Reg. $13.99)

. . . . . . . . ea.

Straight Supertooth Threaded

(Reg. $13.99)

. . . . . . . . . . . . ea.

Reverse Supertooth Counter Bored

(Reg. $13.99)

. . . . . . . ea.

Reverse Supertooth Threaded

(Reg. $13.99)

. . . . . . . . . . . . ea.

$12. 99

$12. 99

$12. 99

$12. 99

$12. 99

$12. 99

SALE! (25+)

ea.

ea.

ea.

ea.

ea.

ea.

$11. 99

$11. 99

$11. 99

$11. 99

$11. 99

$11. 99

ATTENTION READ THIS — Stump cutter wheels often come with different tooth patterns depending on when the machine was built. The complete setups listed above are based on what the manufacturer is producing as of printing. Bailey’s recommends looking at your machine wheel and counting the number of teeth (angled, straight and reverse) to make sure it matches above. Each tooth is available individually, so we can make any combination.

www.baileysonline.com / E-mail [email protected]

Use Our Chipper Knife Selector!

Chipper Knives & Chipper Training

Save Big on Our Chipper Knife 12 Packs!

Bailey’s Industry Leading Chipper Knife

Selector is a comprehensive tool put together by our experts so you can FIND THE

EXACT CHIPPER KNIFE you need FAST and

EASY. Look for the Chipper Knife Selector icon on the right side of our home page at

www. Baileysonline. com

12 PACKS OF OUR MOST POPULAR BLADES

Item No.

KSBC 18 CS

KSBC 5 CS

Chipper Manufacturer

Morbark, Vermeer

Asphlundh, Bandit

Chipmore, Vermeer

Knife Size

Chipper Knife 8" x 3-1/2" x 3/8"

Chipper Knife 16" x 3" x 3/8"

KSBC 26A CS

Bandit

KSBC 36 CS

Bandit, Carlton, Salsco

KSBC 8 CS

KSBC 27 CS

Morbark, Rayco

Morbark

KSBC 30 CS

KSBC 58 CS

KSBC 73 CS

Vermeer

Altec / Vermeer

Vermeer

KSBC 175 CS

Bandit

KSBC 27T CS

Morbark

KSBC 34T CS

Bandit Rayco, Vermeer

Double Edge Chipper Knife 7-1/4" x 4" x 1/2"

Double Edge Chipper Knife 7-1/4" x 4-1/2" x 1/2"

Double Edge Chipper Knife 7-1/4" x 5" x 1/2"

Double Edge Chipper Knife 10-1/2" x 5" x 1/2"

Chipper Knife 12" x 3-1/2" x 3/8"

Double Edge Chipper Knife 9" x 4-1/2" x 5/8"

Double Edge Chipper Knife 8" x 5" x 5/8"

Double Edge Chipper Knife 9" x 5-1/2" x 5/8"

Double Edge Chipper Knife 10-1/2" x 5" x 5/8"

Double Edge Chipper Knife 10" x 5.5" x 5/8"

Replaces OEM #

Vermeer: 79511001

Bandit: 716-1000-22 / Vermeer: 2944001

Bandit: 900-9902-00

Bandit: 900-9901-18 / Carlton: 900117

Morbark / Rayco: 39233-620

Morbark: 39233-692

Vermeer: 101175001

Vermeer: 153175001

Vermeer: 156811001

Bandit: 912-3001-47

Morbark 39233-813

Vermeer: 900-9902-27

Bailey’s now offers the most popular Chipper

Knives in convenient and money-saving 12-packs.

KnifeSource knives are high-quality replacement knives for your brush chipper. Each knife is hardened and machined to

OEM specifications.

Each

$26.99

$43.99

$43.99

$51.99

$55.99

$54.99

$55.99

$59.99

$59.99

$65.99

$71.99

$72.99

12 Pack!

$319. 99

$499. 99

$499. 99

$579. 99

$599. 99

$599. 99

$599. 99

$699. 99

$699. 99

$729. 99

$799. 99

$839. 99

7am - 5pm PST Consumer: 1-800-322-4539 / Bailey’s Industrial: 1-888-465-8227

7

Compact Utility Loaders

Bailey's is proud to offer the Avant compact utility loader product line for Northern California, Northern Oregon and Washington.

Although Avant compact utility loaders are relatively new to North America, they have been a big hit in the contracting, landscaping and tree care industries in Europe. Avant compact utility loaders are manufactured in Finland, and are made of high quality components. Avant compact utility loaders have a wide range of options to make landscaping and tree care work more productive. They have a small footprint, and are much faster than their skid steer counterparts, and they come with an impressive amount of hydraulic power. They offer several different sizes to match your specific application.

2015 AVANT 420 20 HP Diesel Utility Loader

2015 AVANT 528 25 HP Diesel Utility Loader

• Engine: Kubota D722 Diesel 20 HP • Weight: 2,160 lbs.

• Maximum Lift Capacity: 1,200 lbs • Attachments Sold Separately • New

• Located in Woodland CA

AVT 420 77146

. . . . . . . . . . . . . . . . . . . . . Call an Expert at 1-888-465-8227

• Engine: Kubota D1105 Diesel 25 HP • Weight: 2,910 lbs.

• Maximum Lift Capacity: 2,100 lbs • Attachments Sold Separately • New

• Located in Woodland CA

AVT 528 77071

. . . . . . . . . . . . . . . . . . . . . Call an Expert at 1-888-465-8227

8

www.baileysonline.com / E-mail [email protected]

2016 AVANT 528 25 HP Diesel Utility Loader

Compact Utility Loaders

2016 AVANT 640 37. 5 HP Diesel Utility Loader

• Engine: 25HP Kubota Diesel • Max. Platform Height: 110”

• Weight: 3,130 lbs. • Options: ROPS Cab, Seat Heater, Anti-Slip (4x4),

Diff Loc, Counter Weight kit • New • Located in Centralia, WASH

AVT 528 76663

. . . . . . . . . . . . . . . . . . . . . Call an Expert at 1-888-465-8227

2016 AVANT 635 37. 5 HP Diesel Utility Loader

• Engine: 37.5 HP Kubota Diesel • Max. Platform Height: 112” • Weight:

3,500 lbs. • Options: Fully Enclosed Cab, Seat Heater, Anti-Slip (4x4),

Diff Loc, Counter Weight kit • New • Located in Centralia, WASH

AVT 640 78310

. . . . . . . . . . . . . . . . . . . . . Call an Expert at 1-888-465-8227

2016 AVANT 755I 57 HP Diesel Utility Loader

• Engine: 37.5 HP Kubota Diesel Engine • Max. Lift Capacity: 2500 lbs.

• Weight: 3,370 lbs. • Attachments Sold Separately • Hours: New • Located in Woodland CA

AVT 635 78980

. . . . . . . . . . . . . . . . . . . . . Call an Expert at 1-888-465-8227

• Engine: 57 HP Kubota Diesel Engine • Weight: 4,420 lbs.

• Maximum Lift Capacity: 3,800 lbs • Attachments Sold Separately • New

• Woodland CA

AVT 755 80407

. . . . . . . . . . . . . . . . . . . . . Call an Expert at 1-888-465-8227

7am - 5pm PST Consumer: 1-800-322-4539 / Bailey’s Industrial: 1-888-465-8227

9

Compact Utility Loaders

Bailey's is proud to offer the Boxer compact utility loader product line for Northern

California, Northern Oregon and Washington. Boxer compact utility loaders came on the market a few years ago, and they have been a big hit in the contracting, landscaping and tree care industries. All Boxer compact utility loaders are now manufactured by Morbark in their huge factory in Winn, Michigan. Most components (except the engines) are manufactured in house, with machinists and engineers with decades of experience. Boxer compact utility loaders have a wide range of options to make landscaping and tree care work more productive. They have a small footprint, but don't let that fool you, as they come with an impressive amount of hydraulic power.

2014 Boxer 320 Compact Utility Loader 2016 Boxer 525DX Mini-Skid Steer

10

• Engine: 20 HP Kohler Gas Engine • Weight: 1,740 lbs.

• Attachments: Sold Separately • New • Location: Woodland, CA

BXE 320 4186

. . . . . . . . . . . . . . . . . . . . . . . Call an Expert at 1-888-465-8227

• Engine: 24.8HP Kubota Diesel Engine • Weight: 2670 lbs.

• Attachments: Sold Separately • Hours: New • Location: Woodland, CA

BXE 525DX 5094 . . . . . . . . . . . . . . . . . . . . . Call an Expert at 1-888-465-8227

More Than 50 Available Attachment Tools You’ll want to take Everywhere.

Grapple Fork

Attachment

Auger Bit Attachment

Available from 6" to 36"

Back Hoe

Attachment

Adjustable Fork

Attachment

Harlet Power Box Rake

Attachment

Boxer has three model series available; the 300, 400 and 500 series. They are built to handle a full complement of more than

50 universal compact utility attachments. The Boxer’s standard quick-attach system enables the user to quickly and easily switch from a bucket to forks to auger or other tools for optimum on-the-job flexibility and bottom-line performance.

Visit BaileysOnline.com to Watch a Demo Video or Call an Expert at 1-888-465-8227 for More Information.

• Stump Grinder • Rubble Bucket • Grapple Forks

• Hydraulic Tree Forks • 6"- 36" Auger Bits • Tiller

• Cement Mixer with Bucket and Many Many more!

www.baileysonline.com / E-mail [email protected]

Hydraulic Log Loading Trailers & Skid Steer Attachments

Hydraulic Log Trailers

Bailey's has been selling hydraulic log loading trailers since the late 90's. Hydraulic log loading trailers have been a big hit with small scale logging, sawmilling and firewood processing operators. They are also popular with tree care professionals who use them to transport logs, brush, and feed chippers. Hydraulic log loading trailers allow you to transport loads quickly and easily, and access difficult areas with ease. They are available with a wide variety of sizes and styles, from small ATV tow behind models, to commercial goose-neck versions. We also sell log loading grapple units independently, for those of you who want to build your own trailer systems.

2016 Hydraulic Log Loading Trailer (5 Ton) with JMS 155 Grapple

2016 Goose Neck Hydraulic Log Loading Trailer (10 Ton) with JMS 190 Grapple

• Overall length: 22' • Overall width: 89" • Log bed size: 84" x 15'-4" •

Grapple loader: JMS 155 • Grapple Reach •15.5' • Grapple opening

(Max): 48" • Lift Capacity: 2,600 lbs. • Hydraulic Power Unit: 13HP

Honda • Weight: 4,500 lbs • Hours: new • Location: Woodland, CA

RFR 0515513 D160708

. . . . . . . . . . . . Call an Expert at 1-888-465-8227

2016 Goose Neck Hydraulic Log Loading Trailer (7 Ton) with JMS 190 Grapple

• Overall length: 22' • Overall width: 89" • Log bed size: 84" x 15'-4" •

Grapple loader: JMS 190 • Grapple Reach •19' • Grapple opening

(Max): 48" • Lift Capacity: 3,000 lbs. • Hydraulic Power Unit: 13HP

Honda • Hours: new • Location: Woodland, CA

RFR 10G19013 D161005

. . . . . . . . . . . . Call an Expert at 1-888-465-8227

Grapple

Attachment

Visit BaileysOnline.com to watch a Demo Video or Call an

Expert at 1-888-465-8227 for More Information.

Only

$

1, 595

00

Expand the usefulness of your tractor or skid steer. Great for moving logs, hauling brush, loading portable sawmills, loading firewood processors, building stone walls, or loading logs on trailers and trucks.

Features: • 5 Year Warranty • Weighs less than 360 lbs. • Opens up to 42 inches • Bronze bushings at all pivot points • Every pivot point is greaseable • 3 different mounts to choose from Universal, Global and John

Deere 400/500 series.

• Made to last rugged steel design

Item No. FBG

• Overall length: 22' • Overall width: 89" • Log bed size: 84" x 15'-4" •

Grapple loader: JMS 190 • Grapple Reach • 19' • Grapple opening

(Max): 48" • Lift Capacity: 3,000 lbs. • Hydraulic Power Unit: 13HP

Honda • Weight: 16,000 lbs • Hours: New • Location: Woodland, CA

RFR 07G19013 D161122

. . . . . . . . . . . . Call an Expert at 1-888-465-8227

Pictured with winch.

62" 3 Point Tractor Grapple

3PBSG

w/out winch

3PBSG 9

w/ 9,000 lbs winch

3PBSG 12

w/ 12,000 lbs winch

3PBSG 15

w/ 15,000 lbs winch

Beaver Squeezer Grapple & Winch

Beaver Squeezer grapples quickly attach to most common brand skid steers, turning it into a mobile log and brush loader. Beaver Squeezer grapples allow you to grab logs and brush quickly and efficiently, and the 360 degree rotator makes it easy to place material in trucks and trailers. Beaver Squeezer grapples are also a great attachment for feeding brush chippers. Many Beaver Squeezer grapples come with high powered Warn winches. Beever

Squeezer grapples are made in the U.S.A. of quality components and designed for commercial use.

Visit BaileysOnline.com to watch a Demo Video or Call an Expert at 1-888-465-8227 for More Information.

Warn Winch Attachment

BSGWA 9

9,000 lbs winch

BSGWA 12

12,000 lbs winch

BSGWA 15

15,000 lbs winch

Pictured with winch.

62" Skid Steer Grapple

BSG

w/out winch

BSG 9

w/ 9,000 lbs winch

BSG 12

w/ 12,000 lbs winch

BSG 15

w/ 15,000 lbs winch

7am - 5pm PST Consumer: 1-800-322-4539 / Bailey’s Industrial: 1-888-465-8227

11

Wood Splitter and Firewood Processors

Commercial Log Splitters

Bailey's is proud to offer the Timberwolf line of commercial log splitters, firewood processors and conveyors. Timberwolf products are made right here in the U.S. since 1995, and they are known as the Pro's Choice when it comes to log splitting machinery. Timberwolf products are designed for years of use, and are built of high quality components, unlike most box store log splitters. Bailey's has been supplying quality wood splitters (also known as log splitters) and firewood processors since the early 1980's. Hydraulic wood splitters take much of the work out of busting up rounds, and when properly maintained, they last a lifetime.

Timberwolf TW-2 Log Splitter (GX 270)

The TW-2 log splitter will endure heavy use on the farm or at home. Boasts 20 tons of splitting force, a Honda OHV GX Series engine, a

2 stage pump and 9 second cycle time.

Visit BaileysOnline.com or Call an Expert at

1-888-465-8227 for Pricing and More Information.

Timberwolf TW-5 Log Splitter (GX 340)

The TW-5 is Timberwolf's most popular commercial unit, delivering 25 tons of splitting force, with a reliable Honda GX Series engine, and 2 stage pump — an industry standard built for maximum speed and productivity.

Shown with optional log lift and 4-way wedge.

Timberwolf TW-6

Log Splitter (GX 630)

The TW-6 log splitter is built for speed and power to ensure maximum commercial firewood production. This model is great for those large, hard to split chunks.

Shown with optional log lift, table grate and 4-way wedge.

The model HWP-140 is the most popular of the Halverson firewood processors, due to the adjustable splitting wedge.

Skid Steer

Firewood Processor

Halverson firewood processors have been a big hit with folks who operate skid steer equipment.

Halverson firewood processors quickly attach to most common brand skid steers, turning your skid steer into a self contained firewood processing machine.

The patented design allows you to load, cut and split whole logs into perfect firewood, all from the comforts of your skid steer seat. These simple attachments turn logs into piles of firewood quickly and efficiently.

Whether you are a small land owner, farmer, tree service operator, or just like to cut firewood efficiently, this attachment is for you. The Halverson firewood processor is made in the U.S.A. of quality components and is designed for commercial use.

The model HWP-130 is the most economic version of the Halverson firewood processors.

Item No. HWP 130

12

www.baileysonline.com / E-mail [email protected]

Item No. HWP 140

Visit BaileysOnline.com for a Demo Video or Call an Expert at 1-888-465-8227 for Pricing and More Information.

Logging Grapples

Bailey's is proud to offer the Rotobec line of industrial logging grapples.

Rotobec log grapples are designed for the most demanding logging applications. An interlocking head structure maximizes durability ensuring industry-leading uptime. The integrated cylinder guards on the jaw structure provide an outstanding level of protection in all handling applications. Each model comes standard with one of Rotobec’s own industry leading RT Series sealed rotators. A Rotobec grapple saw can be easily mounted to the HD and

SHD series grapples, enhancing your efficiency. Rotobec Log Grapples are available in standard, heavy, and super heavy-duty models depending on your working environment.

Rotobec PC018R w/ RT-222-2 Rotator

Rotobec Elite 910

• Opening: 56-1/4" • Closing: 2-3/4" • Volume: .22 cubic yards

• Area to Tip: 2 sq. feet • Rotator lifting capacity: 25,000 lbs.

• Torque at relief pressure: 15,720 in.lb Weight: 835 lbs. • Rotator

Type: Continuous sealed. • Location: Woodland, CA

RTC PC018R

. . . . . . . . . . . . . . . . . . . Call an Expert at 1-888-465-8227

Rotobec 4560SHD w/ RT-1004 Rotator

• Max. Lift Capacity: 8,770 lbs. • Weight w/ Standard Boom: 4,940 lbs.

• Operating Pressure: 3,000 psi. double functioning joystick, 8 port hydraulic oil manifold • Rotation: 360° • Boom Length: 22' • Location: Woodland, CA

RTC ELITE 910

. . . . . . . . . . . . . . . . . . . Call an Expert at 1-888-465-8227

• Opening: 60" • Closing: 4-3/4" • Rotator: RT-1004 • Rotator lifting capacity: 100,000 lbs. • Weight: 2,715 lbs • Options: Hydraulic Winch

• Location: Woodland, CA

RTC 4560SHD

. . . . . . . . . . . . . . . . . . . . Call an Expert at 1-888-465-8227

Saw Option

Rotobec has partnered with Hultdins to offer the addition of a saw to add an element of versatility to the already unstoppable Rotobec Log Grapple. These amazing saws are available with a .404 and a .750 pitch and can be fitted to both the

Heavy Duty and Super Heavy Duty series grapples. Remove the human element and increase your operation’s efficiency with this log chopping beast.

7am - 5pm PST Consumer: 1-800-322-4539 / Bailey’s Industrial: 1-888-465-8227

13

Portable Sawmills at

Exclusive Lucas Mill Distributor in North America

Lucas Mill portable sawmills have been a big hit here in North America since their introduction back in 1996. Today, there are well over 15,000 Lucas Sawmills operating worldwide, with a great many of those still cutting logs today. These portable sawmills are designed for production milling of saw logs, both large and small, on a commercial scale. These sawmills are available in both circular swing blade or slabber versions. The swing blade models break down logs into accurate lumber, which is far quicker and easier than comparably priced bandsaw sawmills. They are also much cheaper to operate, as the carbide tipped saw blades don't require the constant maintenance that bandsaw blades need. The Lucas Mill slabbers are designed to cut large logs into slabs and tabletops for specialty woodworking projects.

Model 6-16 Ideal for smaller saw milling operations.

LM M6 16

Max. single pass: up to 6.25" x 6.25"

Max. double pass: up to 6.25" x 12.5"

Model 6-18 Ideal for medium sized operators.

LM M6 18

Max. single pass: up to 6.25" x 6.25"

Max. double pass: up to 6.25" x 12.5"

Model 7-23 An affordable option with more than sufficient cutting capacity.

LM M7 23

Max. single pass: up to 7-7/8" x 7-7/8"

Max. double pass: up to 7-7/8" x 15-7/8"

Model 8-30 EFI This powerful mill is currently the most popular choice.

LM M8 EFI Max. single pass: up to 8.5" x 8.5"

Max. double pass: up to 8.5" x 17"

Model 10-30 EFI Recommended for operations that plan to mill large dimension boards on a regular basis.

LM M10 EFI Max. single pass: up to 10" x 10"

Max. double pass: up to 10" x 20"

14

Visit BaileysOnline.com to Watch a Demo Video or Call an Expert at 1-888-465-8227 for More Information.

www.baileysonline.com / E-mail [email protected]

Lucas Mill dedicated slabbing sawmills (also known as dedicated slabbers) are specifically designed for cutting large wood slabs. Dedicated slabbers use the patented Lucas Mill frame system to make setup and operation productive and simple. These machines create large, natural edge slabs from logs, stumps, burls and root balls with accurate results. Dedicated slabbers use specially designed ripping chainsaw chain to cut smooth and accurately through the largest and toughest of woods.

Slabbers at

Model DSM 23 Dedicated Slabber specifically designed for cutting large timber slabs.

DSM 23 15

60" wide max cut / 19.7" depth cut / up to 20' max length

DSM 23 19

76" wide max cut / 19.7" depth cut / up to 20' max length

DSM 23 27

108" wide max cut / 10.5" depth cut / up to 20' max length

Dedicated Slabber Trolley only. Designed to fit on an existing Lucas Mill frame system.

(excluding Model 4)

DST 23 15

DST 23 19

60" wide max cut / 19.7" depth cut

76" wide max cut / 19.7" depth cut

Financing Options Available!

Call or See Our Website for Details!

We Have a Slabbing Solution to Meet Your Needs

• We offer Slabbing attachments that will convert your current Lucas Mill into a Slabbing MACHINE producing slabs up to 60" wide!

• Dedicated SUPER SLABBERS that will mill slabs up to

9 FEET WIDE!

• Slabs fetch large dollars — Increase your business and your bottom line — Get started slabbing today!

Call our Lucas Mill Specialists Toll-Free at

1-888-465-8227

or visit our website

baileysonline. com

7am - 5pm PST Consumer: 1-800-322-4539 / Bailey’s Industrial: 1-888-465-8227

15

Portable Sawmills

Logosol M8 Sawmill

The LOGOSOL M8 is our best selling model. Into this portable sawmill we have put over 25 years’ experience of small-scale sawing. With the Logosol Sawmill M8 you can quickly produce high-quality planks and boards in the length and dimensions of your choice. The sawmill is simple to use – and built of strong, anodized aluminum.

NOTE:

The M8 sawmill is available in a Complete Kit. The complete kit comes with a Husqvarna 390XP chainsaw powerhead and everything you need to start milling (excluding proper chainsaw safety gear and log moving equipment). See below.

Visit BaileysOnline.com or Call an Expert at 1-888-465-8227 for Pricing and More Information.

Quick mounting with special nuts keeps the saw in exact position when you are sawing.

Two log clamps secure the log in the right position.

Log ladder included for easy log handling.

• Weighs 150 lbs without saw unit

• Overall Length: 18 ft

• Maximum diameter of logs: 32"

• Maximum length of logs:

16 ft 5"

• Maximum weight of logs:

1,200 lbs

• Space between the log supports: 79"

LSL 4508 000 1010

LSL 4508 000 1015

M8 Sawmill

M8 Complete Kit

Visit BaileysOnline.com to see the demonstration video.

Logosol Farmers M8 Sawmill

*FREE

The Logosol Farmers M8 sawmill is a scaled down version of their popular M8 series sawmills. The Farmers has all the basic features of the M8 sawmill, so it is highly mobile, fun and easy to operate, and makes perfect lumber from small and medium sized logs.

Chainsaw not included. NOTE: The Farmers M8 sawmill is available in a Complete Kit. The complete kit comes with a

Husqvarna 390XP chainsaw powerhead and everything you need to start milling (excluding proper chainsaw safety gear and log moving equipment). See below.

Comes with a four meter long guide rail that can be extended to any length with additional onemeter sections.

• Weighs 120 lbs. (50kg) without saw unit

• Overall Length: 13 ft (4m)

• Maximum diameter of logs:

24" (60 cm)

• Maximum length of logs:

12 (3.8m)

• Distance between log beds:

6 ft with option to contract to

3 ft (1 or 2 m)

Made of a light and strong aluminum alloy.

LSL 4520 000 1000

Farmers Sawmill

LSL 4520 000 1005

Farmers Complete Kit

Visit BaileysOnline.com or Call an Expert at 1-888-465-8227 for Pricing and More Information.

* Free Shipping Offer applies to the specified item on this page and shipped by UPS Ground in the 48 continental United States.

16

www.baileysonline.com / E-mail [email protected]

Convenient lifting winches with log beds, which together can stand the load of one ton!

4-sided machining

Width: 0.59" to 10.2"

Height: 0.39" to 3.93"

2-sided machining

Width: 11.8"

Height: 3/8" to 9"

Planing Width: 5. 5"

Height: 9"

Weight: 772 lbs.

Visit BaileysOnline.com

to see the demo video.

4-sided machining

Width: 14" / Height: 5"

2-sided machining

Width: 16" / Height: 3/8" to 9"

Planing Width: 20"

/ Height: 9"

Weight: 1,322 lbs.

Visit BaileysOnline.com

to see the demo video.

PH 360 4-Head Planer / Moulder

The LOGOSOL PH360 is a stable foursided planer/moulder for professional production. Its compact design gives you high capacity and a perfect result.

You can plane and mould the timber on all four sides in one operation. You can expect full production from day one.

This machine makes everything from fine trim work to log home beams with precision.

LSL 7536 000 0020

PH360 4-Head 3 phase

Moulder / Planers & Frame Saw

Model 4 PH 260 4-Sided Planer / Moulder

The LOGOSOL PH260 is a complete planing mill for the joinery and construction trade. This machine is easy to use and easy to own. You can plane and mould the timber on all four sides in one operation.

LSL 7514 000 0025

LSL 7514 000 0030

LSL 7505 000 0015

LSL 7505 000 0020

LSL 7500 000 1000

PH260, incl. variable feed

6-36 ft/min. 3 phase

PH260, incl. variable feed

6-36 ft/min. Single phase

PH260 ECO 3 phase

PH260 ECO 1 phase

In-and out-feed tables

4-sided machining

Width: 14.7"

Height: 0.39" to 5.9"

2-sided machining

Width: 16"

Height: 3/8" to 9"

Planing Width: 20"

Height: 9"

Weight: 2,204 lbs.

Visit BaileysOnline.com

to see the demo video.

PH365 Five-Sided Molder / Planer

The LOGOSOL PH365 you can produce complex profiles in one operation. For example, you can produce material for window manufacturing. This machine is the large four-sided planer/moulder PH365 that has been equipped with a unique fifth cutter. It differs from everything else on the market by being able to be tilted through

270 degrees. This means that you can machine from below, from the side or from above.

LSL 7537 000 0020

PH365 5-Head 3 phase

Laks 500 Frame Saw

The LOGOSOL Laks 500 turns cants into sawn boards with unique efficiency and reliability. The frame with up to 20 sawblades and the mechanical feed work in perfect harmony. You get a controlled process with minimal handling. Just a few hours after delivery, you can start production. Low energy consumption and environmentally friendly and economical while putting out 400 linear feet of sawn timber per hp. The Logosol-Laks frame saw relentlessly works away, without interruption or trouble, hour after hour.

Example of capacity: If the frame saw is equipped with 12 sawblades and you are going to produce 25 mm (1") thick boards from a 300 mm (12") wide cant, it is possible to place two cants, of which one is 100 mm (4") and the other 50 mm (2") high, on top of each other. This way you get the capacity to cut almost 1000 meter/hour (3300 linear feet) per hour.

LSL 6100 000 0503

23hp gas powered

Visit BaileysOnline.com or Call an Expert at 1-888-465-8227 for Pricing and More Information.

Visit BaileysOnline.com

to see the demo video.

17

Hydro-Seeders

Bailey's is proud to offer Finn hydro-seeders for Northern California. Finn started making hydro-seeders back in 1953, and they are considered the premium line for landscaping and erosion control contractors. Finn hydro-seeders are more efficient than sodding, broadcast seeding and fertilizing. Finn hydro-seeders are 100% hydraulically driven and mechanically agitated, making them incredibly efficient. Finn hydro-seeders are manufactured with quality U.S. made components, and assembled with machinist and engineers with decades of experience. They offer several different machinery lines to match your specific application

2016 Finn T60 Hydroseeder

2016 Finn T75 Hydroseeder

• Tank: 600 Gallon • Engine: 23.5HP Kohler CH730 2 Cylinder

Gas Engine • Pump: 3" x 1.5" Centrifugal 135 GPM at 65 PSI •

Gross Weight (GVWR): 6,000 lbs • Hours: New • Woodland, CA

FNN T60T M N 2596

. . . . . . . . . . . . . . . Call an Expert at 1-888-465-8227

2016 Finn T120 Hydroseeder

• Tank: 700 Gallon Working Capacity • Engine: 23.5HP Kohler

CH730 2 Cylinder Gas Engine • Pump: 3" x 1.5" Centrifugal 135

GPM at 65 PSI • Gross Weight (GVWR): 10,000 lbs • Hours: New

• Woodland, CA

FNN T75T M D 804

. . . . . . . . . . . . . . . Call an Expert at 1-888-465-8227

2016 Finn T75 Hydroseeder

18

• Tank: 1,000 Gallon Working Capacity • Engine: 35 HP Yanmar

(Tier 4 Final) 3 cylinder Diesel • Pump: 4" x 2" Centrifugal 170

GPM at 100 PSI • Gross Weight (GVWR): 17,200 lbs

• Hours: New • Woodland, CA

FNN T120T M L 3939

. . . . . . . . . . . . . . . Call an Expert at 1-888-465-8227

• Tank: 700 Gallon Working Capacity • Engine: 23.5HP Kohler

CH730 2 Cylinder Gas Engine • Pump: 3" x 1.5" Centrifugal 135

GPM at 65 PSI • Gross Weight (GVWR): 10,000 lbs • Hours: New

• Woodland, CA

FNN T75T M D 808

. . . . . . . . . . . . . . . Call an Expert at 1-888-465-8227

VARI ABLE SPEED REVERSI BLE AGI TATI ON

Powerful hydraulically driven mechanical agitation allows for control of both agitator speeds and paddle direction. The power of the FINN agitation system allows whole mulch bales to be loaded into the machine without the need for dangerous grinders or breaking up the bale; thereby speeding up the loading and mixing process.

THE FI NN PUM P

Unlike many industry competitors, this highly engineered pump is designed to handle the thickest slurries. The FINN centrifugal pump can easily be field adjusted to ensure pump pressure is maintained.

This reduces the cost of maintenance while providing more reliable and consistent performance.

www.baileysonline.com / E-mail [email protected]

Bark and Mulch Blowers & Straw Blowers

With high production bulk material handling and accurate application, your workers can substantially increase productivity over traditional processes. Finn bark and mulch blowers apply uniform coverage, you’ll achieve material savings of 25% or more. Finn bark and mulch blowers are manufactured in Fairfield, Ohio. Machines are manufactured with quality U.S. made components, and assembled with machinist and engineers with decades of experience. They offer several different machinery lines to match your specific application

2016 Finn BB302 Bark Blower

2016 Finn BB302 Bark Blower

• Capacity: 1.5 Cubic Yards • Engine: 35 HP Yanmar (Tier 4 Final)

3 cylinder Diesel • Blower: 500 CFM at 10 PSI • Rated Weight

(GVWR): 5,800 lbs. • Hours: New • Woodland, CA

FNN BB302 MN 1560 Call an Expert at 1-888-465-8227

• Capacity: 1.5 Cubic Yards • Engine: 35 HP Yanmar (Tier 4 Final)

3 cylinder Diesel • Blower: 500 CFM at 10 PSI • Rated Weight

(GVWR): 5,800 lbs. • Hours: New • Woodland, CA

FNN BB302 MN 1561 Call an Expert at 1-888-465-8227

2016 Finn BB 5-Series Bark Blower

Finn started making straw blowers back in 1935, and they are considered the premium line for erosion control contractors. Finn straw blowers multiply your productivity and profits by doubling straw coverage in a fraction of the time it takes to apply by hand.

There’s no more efficient way to ensure soil moisture retention and protect against erosion damage to freshly seeded areas. Finn straw blowers are manufactured in Fairfield, Ohio. Machines are manufactured with quality U.S. made components, and assembled with machinist and engineers with decades of experience. You save time and energy by eliminating tedious and time consuming hand mulching, and the quality and coverage are far superior to that of traditional methods. Using the B70 straw blower can guarantee a faster and more uniform growth over larger areas. And because the unit is both self-powered and portable, it’s easy for you to mulch in diverse locations and hard to reach areas.

• Capacity: 5 Cubic Yards • Engine: 65 HP Cummins (Tier 4 Final)

QSF 2.8 Liter Diesel • Blower: 725 CFM at 12 PSI • Rated Weight

(GVWR): 14,400 lbs. • Hours: New • Woodland, CA

FNN BB5 SER ML 228 . . . . . . . . . . . . . . Call an Expert at 1-888-465-8227

2016 Finn B70 Straw Blower

• Capacity: Up to 7 tons of Straw or Hay per Hour • Engine: 35

HP Yanmar (Tier 4 Final) 3 cylinder Diesel • Feed: Manual •

Gross Weight (GVWR): 2,360 lbs. • Hours: New • Woodland, CA

FNN B70T ML 4401

. . . . . . . . . . . . . . Call an Expert at 1-888-465-8227

7am - 5pm PST Consumer: 1-800-322-4539 / Bailey’s Industrial: 1-888-465-8227

19

Exclusive Wild Ass Clothing

20

Bailey’s World Famous Wild Ass brand clothing is sewn in the US from high-quality American made denim fabric. We have brought back the original, bright red, WILD ASS "Henry" patch on the back pocket. These pants have the same great design, fit, and feel that our customers have relied on for over 30 years.

Unbeatable value in outerwear is alive and kicking! Wild Ass clothing is only found at Bailey’s.

$

As Low As

24

99

Reg. From

$

28

99

Long-wearing and durable, the traditional blue jean is made from heavy-duty 14.75 oz. 100% cotton denim and the black denim is made from pre-washed, 13.75 ounce 100% denim.

These classic jeans also include bachelor buttons featuring a picture of "Henry." Available in Single and Double Knees.

Item No.

P100WA

P400WA

P200WA

P500WA

Blue Singles

(Reg. $28.99)

Black Singles

Blue Doubles

(Reg. $31.99)

(Reg. $33.99)

Black Doubles

(Reg. $37.99)

. . . . .ea.

. . . . .ea.

. . . . .ea.

. . . .ea.

SALE!

$24. 99

$27. 99

$29. 99

$32. 99

Wild Ass Outerwear!

Now Only

$

42

99

Now Only

$

39

99

Denim Coat

These durable yard coats are riveted at all stress points and are made with our signature heavy-duty construction and classic styling! Easy slip in side pockets for your hands and two chest pockets (one with a button closure). Made from 14.75 oz.

100% cotton denim.

Reg. from

$

59

99

Lined Denim Vest

These heavy-duty constructed vests are nicely lined with a blend of 70% acrylic and 30% polyester. Made from

14.75 oz. 100% cotton denim. We've even included inside chest pockets on the left and right with secure velcro closures. Comes in Blue or Black.

Reg.

$

49

99

Wild Ass “Henry” patch appears on the back of both coat and vest!

P600WA

Denim Coat Unlined

(Reg. $59.99)

. . . . . . . . . . . . ea.

P700WA

Denim Coat Lined

(Reg. $69.99)

. . . . . . . . . . . . . . ea.

P800WA

Denim Vest Lined

(Reg. $49.99)

. . . . . . . . . . . . . . ea.

$42. 99

$49. 99

$39. 99

www.baileysonline.com / E-mail [email protected]

Safety Gear and Chainsaw Protection

Full-Brim & Cap Aluminum

Hard Hats

SALE

$ 44 99

Reg.

$

54

99

COLORS: Hi-viz orange and unpainted aluminum.

WARNING: DO NOT use aluminum helmets near electrical hazards.

758 ALU

Full Brim (Plain Aluminum)

(Reg. $54.99)

. . . . . . . . . . . ea.

758 ORG

Full Brim (Orange)

(Reg. $54.99)

. . . . . . . . . . . . . . . . . . ea.

768 ALU

Cap (Plain Aluminum)

(Reg. $54.99)

. . . . . . . . . . . . . . . ea.

768 ALU

Cap (Orange)

(Reg. $54.99)

. . . . . . . . . . . . . . . . . . . . . . ea.

$44. 99

$44. 99

$44. 99

$44. 99

SALE

$ 54 99

Reg.

$ 59 99

Pro Forestry Helmet System

Chainsaw Safety Special!

Chainsaw

Safety Chaps

$

Sale from

49 99

$

Reg. from

59

99

They have 400 Denier ultra nylon green covering, two layers of DuPont KEVLAR and two layers of polyester felt. The adjustable belt is 2" (5cm), wide and the adjustable straps are 1" (2.5cm), wide with quick snap fasteners. These chaps are 15" (37cm), wide at their widest spot on each leg.

132 GRN RG

28" Pad, 32" Overall

(Reg. $59.99)

. . ea.

132 GRN LG

30" Pad, 34" Overall

(Reg. $59.99)

. . ea.

132 GRN XL

32" Pad, 36" Overall

(Reg. $59.99)

. . ea.

132 GRN 2X

36" Pad, 40" Overall

(Reg. $64.99)

. . ea.

$49. 99

$49. 99

$49. 99

$55. 99

Please see website for complete info and Safety Certifications.

Item No. ORF 564101

Made of high impact resistant ABS plastic. There are gutters to direct rain away and off. The stainless steel mesh screen is on a ratchet system and will hold when lifted up for critical looks. The ear muffs are rated at a NRR value of 23db.

ProChapsZ Protective Chaps

SALE!

Starting at

$

82

99

Reg. from

$

95

99

Super Plasma Helmet

Only

$

129

95

Item No. KASK WHE102

The outer shell is molded with ABS plastic for toughness and impact resistance. The inner shell is made with HD Polystyrene for comfort and shock absorption. This helmet comes with an adjustable universal sizing suspension and an Up & Down adjustment system for superior fit due to its unique double pivot design.

Available in Yellow, Red, Blue,

White, Black and Orange.

Aearo Peltor Hearing

Protection

SALE

$ 32

99

Reg.

$ 37 99

• Recessed cup will fit all hard hat types.

• Noise reduction rating of 22dB.

• Meets CSA class 'A' standards.

Item No. 35605

Reduce Catch Points with ProChapsZ™ Hassle-

Free Wear from Elvex! The 91Z Series offers full wrap-around calf protection, plus adjustable and replaceable velcro closures.

• 1,000 Denier Cordura outer shell.

• Meets ASTM F-1414, ASTM F-1897-2008.

• Exclusive Elvex Prolar protective padding for quick chain stopping action!

ELV JE9130Z

33" -36" Length

(Reg. $95.99)

. . ea.

39" Length

(Reg. $98.99)

. . . . . . ea.

$82. 99

$85. 99

More ELVEX protective chaps ON SALE on our website!

Chainsaw Chaps

Husqvarna Classic

Chainsaw Chaps

Husqvarna

Technical Pro

Zipper Chaps

Only

$

74

95

Cover material is 600 denier polyester with a PVC coating. 5 layers of TEK Warp material make up the cut resistant pad.

Only

$

95

99

The cut resistant pad is made of the same 5 layers of TEK Warp as the Husqvarna Classic chaps. Calf wrap zips together and is secured with velcro straps.

Item No. HVA 587 16 07 01

Item No. HVA 585032501

(36" Length)

HVA 585032502

(40" Length)

21

7am - 5pm PST Consumer: 1-800-322-4539 / Bailey’s Industrial: 1-888-465-8227

Bailey’s Industrial Division

1222 Commerce Ave., Suite D

Woodland, CA 95776

PRSRT STD

U.S. POSTAGE

PAID

BAILEYS INC.

Customer #

Key Code #

Visit the Bailey’s

Mobile Website!

Printed in the U.S.A.

© 2017 Bailey’s — Forestry | Woodcutting | Tree Care | Landscaping | Outdoor Power Equipment

Equipment Rental

Now Available

Call an Expert at 1-888-465-8227 for Pricing,

Available Machines and Rental Information.

Options for by the day, week or monthly.

90% of rental fees may be applied to purchase during the 1st month.

Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement