EL-5600 - CIE AV Solutions
EL-5600
Multi Format Presentation Switch (including SDI)
OPERATION MANUAL
DISCLAIMERS
The information in this manual has been carefully checked and is
believed to be accurate. CYP (UK) Ltd assumes no responsibility for any
infringements of patents or other rights of third parties which may result
from its use.
CYP (UK) Ltd assumes no responsibility for any inaccuracies that may be
contained in this document. CYP (UK) Ltd also makes no commitment to
update or to keep current the information contained in this document.
CYP (UK) Ltd reserves the right to make improvements to this document
and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted, transcribed,
stored in a retrieval system, or any of its part translated into any language
or computer file, in any form or by any means—electronic, mechanical,
magnetic, optical, chemical, manual, or otherwise—without express
written permission and consent from CYP (UK) Ltd.
© Copyright 2011 by CYP (UK) Ltd.
All Rights Reserved.
Version 1.1 August 2011
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
3
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or operate
this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of fire,
electrical shock and injury to persons.
• To prevent fire or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts inside
the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU if
it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufficient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO. DATE
SUMMARY OF CHANGE
v1.00
29/07/2013
First release
v1.01
06/07/2013
Corrections
4
CONTENTS
1. Introduction�������������������������������������������6
2. Applications�������������������������������������������6
3. Package Contents����������������������������������6
4. System Requirements���������������������������6
5. Features��������������������������������������������������7
6. Operation Controls and Functions�������8
6.1 Front Panel��������������������������������������������������� 8
6.2 Rear Panel����������������������������������������������������� 9
6.3 Remote Control����������������������������������������10
6.4 RS-232 Protocols��������������������������������������11
6.5 RS-232 Commands����������������������������������12
6.6 OSD MENU�������������������������������������������������14
7. Connection and Installation�������������� 16
8. Specifications�������������������������������������� 17
8.1 Technical Specifications������������������������17
8.2 Supported Input/Output Resolution�������18
9. Acronyms��������������������������������������������� 20
5
1. INTRODUCTION
T​ he EL-5600 presentation switch is an advanced HDMI, PC, SDI,
Composite, S-Video and Component switcher/scaler. This device can
scale and switch input sources and display them via the HDMI and VGA/
HD outputs simultaneously with their associated audio signals at a wide
range of output resolutions (up to 1080p or WUXGA reduced blanking).
Audio can be de-embedded from HDMI and SDI input sources using the
built-in Digital to Analogue audio converter (DAC), whilst analogue audio
can also be converted to digital for ultimate flexibility in audio signal
management. In addition, there is an SDI Loop Out for monitoring or
extending the SDI input signal. Control is via the IR remote, RS-232, or via
front panel buttons and includes an on-screen menu providing settings
and system information.
2. APPLICATIONS
Digital and analogue signal convergence
Convert analogue video/audio signals for use with digital displays
Integrate multiple sources and signal types to a single display in a
Meeting room or Conference hall environment
3. PACKAGE CONTENTS
EL-5600 Multi format switch
Remote Control (CR-117)
15-pin D-Sub to 3 RCA adaptor cable
Power Adaptor
Operation Manual
4. SYSTEM REQUIREMENTS
Source equipment such as Blu-ray players or SDI camera, VGA or HDMI
display and amplifier/active speakers with connection cables.
6
5. FEATURES
Supports HDMI, Composite Video, S-Video, PC (VGA)/HD (Component)
and SDI inputs
Supports HDMI and VGA/Component (with adaptor) outputs
Supports SDI loop-through output
Supports analogue stereo, optical and coaxial digital inputs and
optical digital output, analogue stereo output or embedding to HDMI
output
Supports conversion of multiple video formats and audio input to
HDMI or PC/HD and analogue stereo outputs
Supports EDID and HDCP
Supports 3D de-interlacing, noise reduction and 3D comb filter
Supports frame rate conversion
Supports RS-232, IR remote control, and front panel control
Supports SDI Standards of SMPTE 425M (Level A and Level B), SMPTE
424M, SMPTE 292M, SMPTE 259M-C
Supports SDI bit rates at 2.970 Gb/s, 2.970/1.001 Gb/s, 1.485 Gb/s,
1.485/1.001 Gb/s and 270 Mb/s
Supports SDI signal input and output distances of up to 300m for SD
signals, 200m for HD signals and 100m for 3G signals
Supports SDI Auto video mode detection (3G/SD/HD)
Video functions: Aspect Ratio Adjustment / Video Noise Reduction /
Underscan & Overscan Selection / De-Interlacing
Note: SDI cable operating distance tested with belden 1694A cable. Operating
distances may vary for cables of different specifications.
7
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
CSLUX-300I DIGITAL VIDEO SCALER
XGA
POWER
IR
INPUT
CV
SV
PC
COMP
HDMI 1
HDMI 2
SDI
MENU
-
+
ENTER
720P
1
2
3
4
5
6
1 POWER & POWER LED: Press this button to switch the device on or
to set it to standby mode. Once the device is connected to an active
power supply the LED will illuminate and the device will switch on
automatically.
2 IR Receiver window: Receives only the IR signal from the remote
control included in the package.
3 INPUT button and LEDs: Press this button repeatedly to cycle
through the input sources sequentially. An LED on the front panel will
illuminate to indicate the selected input source.
4 MENU: Press this button to enter the OSD menu.
5 −/+: Press these buttons to navigate up and down in the OSD menu.
6 ENTER: Press this button to confirm the selection in the OSD menu.
Press this button simultaneously with the '+' (plus) button to instantly
switch the output to XGA resolution or with the '−' (minus) button to
instantly switch the output to 720p resolution.
8
6.2 Rear Panel
2
OUTPUT
OPTICAL
L/R
4
5
7
RS232
SERVICE 1
PC/HD
OPTICAL
SERVICE 2
SDI
LOOP OUTPUT
HDMI
INPUT
R
L/R
SDI
HDMI 1
3
CV
R
L
DC 5V
HDMI 2
Cr/Pr
1
L
PC
Cb/Pb
Y
SV
R
L
6
1 OUTPUT:
L/R: Connect to an amplifier or active speakers for audio output in
stereo format.
HDMI: Connect to an HDMI display or amplifier for video and/or audio
output.
OPTICAL: Connect to an amplifier or active speakers for audio output
in digital format.
PC/HD: Connect to a monitor/display for video output. For HD
(Component) output,use the supplied D-Sub 9pin to 3 RCA adaptor
cable for HD resolutions from 480p~1080p.
2 SERVICE 1: Reserved for manufacturer use only.
3 SDI LOOP OUTPUT: Connect to an SDI display for monitoring of the
SDI input signal or an SDI extender for extending the SDI signal to
further areas.
4 RS-232: Connect to a PC/Laptop to use RS-232 commands to control
the device (See Section 6.5 for details on RS-232 commands).
5 SERVICE 2: Reserved for manufacturer use only.
6 INPUT:
SDI: Connect to an SDI camera or other SDI source for both video and
audio signal conversion.
HDMI 1: Connect to an HDMI source such as Blu-ray/DVD player for
both video and audio signal conversion.
HDMI 2: Connect to an HDMI source such as Blu-ray/DVD player for
both video and audio signal conversion.
9
L/R: Connect to source's L/R output with 3.5mm mini-jack for audio
signal conversion.
PC/HD: Connect to a PC/Laptop source for video signal input with a
D-Sub 15pin cable.
OPTICAL: Connect to a source's optical output for audio signal
conversion.
YCbCr/HDPbPr + L/R: Connect to source equipment such as a DVD
player for both video and audio signal conversion.
CV + L/R: Connect to a composite video source such as video/DVD
player for both video and audio signal conversion.
SV + L/R: Connect to an S-Video source such as a video/DVD player for
both video and audio signal conversion.
7 DC 5V: Plug the 5 V DC power supply into the unit and connect the
adaptor to an AC outlet.
6.3 Remote Control
1 INPUT: Press this button repeatedly
to cycle through the input sources
sequentially. An LED on the front panel
will illuminate to indicate the selected
input source.
2 POWER: Press this button to switch the
device on or to set it to standby mode.
3 CV/SV/COMP/PC/HDMI1/HDMI2/SDI:
Direct source selection keys. Press one
of these keys to switch to the selected
source.
1
3
INPUT
POWER
CV
SV
COMP
PC
HDMI 1
HDMI 2
SDI
4
EXIT
MENU
6 RESET: Press this button to reset the
device back into the default settings.
10
5
OK
6
AUTO
ADJUST
RESET
7
8
4 EXIT: Press this button to exit the menu or
the current selection in the OSD menu.
5 MENU: Press this button to enter the OSD
menu.
2
CR-117
7 AUTO ADJUST: Press this button when the image being output does
not correctly fit the display's screen. The device will auto adjust the
image to fill the screen.
8 OK & ▲▼◄►: Press OK to confirm the selection or press the arrow
buttons to navigate the OSD menu.
6.4 RS-232 Protocols
EL-5600
Remote Control
PIN
Assignment
PIN
Assignment
1
NC
1
NC
2
Tx
2
Rx
3
Rx
3
Tx
4
NC
4
NC
5
GND
5
GND
6
NC
6
NC
7
NC
7
NC
8
NC
8
NC
9
NC
9
NC
►
◄
Baud Rate: 9600bps
Data bit: 8 bits
Parity: None
Flow Control: None
Stop Bit: 1
11
6.5 RS-232 Commands
Command
Description
Contents
S SOURCE 0~6
Select input source
R SOURCE
Inquire input source
SDI(0) / HDMI1(1) / HDMI2(2)
/ YPBPR(3) / VIDEO(4) /
SVIDEO(5)/ PC(6)
S OUTPUT 1~25
Select output timing
R OUTPUT
Inquire output timing
S SIZE 0~6
Select output size
R SIZE
Inquire output size
S CONTRAST 0~60
Contrast Setting
R CONTRAST
Inquire contrast setting
S BRIGHTNESS 0~60
Brightness setting
R BRIGHTNESS
Inquire brightness setting
S HUE 0~60
Hue setting
R HUE
Inquire hue setting
S SATURATION 0~60
Saturation setting
R SATURATION
Inquire saturation setting
S SHARPNESS 0~30
Sharpness setting
R SHARPNESS
Inquire sharpness setting
S NR 0~3
Noise reduction setting
R NR
Inquire noise reduction
setting
12
640*480(1)/800*600(2)/
1024*768(3)/1280*768(4)/
1360*768(5)/1280*720(6)/
1280*800(7)/1280*1024(8)/
1440*900(9)/1400*1050(10)/1
680*1050(11)/
1600*1200(12)1920*1080(13)/1
920*1200(16)/
480p(17)/720p 60(18)/ 1080p
60(19)/ 1080i 60(20)/
576p(22)/720p 50(23)/ 1080p
50(24)/ 1080i 50(25)
OVERSCAN(0) / FULL(1) /BEST
FIT(2) / PAN SCAN(3)/LETTER
BOX(4) /UNDER 2(5) / UNDER
1(6)
OFF(0) / LOW (1) / MIDDLE(2)
/ HIGH(3)
Command
Description
Contents
S AUDIODELAY 0~3
Audio delay setting
R AUDIODELAY
Inquire audio delay setting
OFF(0) / 40ms (1) / 110ms(2)
/ 150ms(3)
S AUDIOMUTE 0/1
Audio mute setting
R AUDIOMUTE
Inquire audio mute setting
S SDIAUDIO 0~3
SDI Audio channel setting
R SDIAUDIO
Inquire SDI Audio channel
setting
S AUDIOSELECT 0/1
Audio Input setting
R AUDIOSELECT
Inquire audio Input setting
S KEY LOCK 0/1
Key lock setting
R KEY LOCK
Inquire key lock setting
FW
Firmware checking
S RESET 1
Pre-reset
S POWER 0/1
Power Setting
R POWER
Inquire Power Setting
EXIT
Exit
ON(0) / MUTE(1)
CH1CH2(0), CH3CH4(1)
CH5CH6(2), CH7CH8(3)
ANALOG(0) / SPDIF(1)
ENABLE(0) / DISABLE(1)
OFF (0) / ON (1)
Note:
1.Audio delay is only supported on analogue L/R output.
2.When the HDMI input is encoded with HDCP, no image will be output from
the PC/HD output.
3.Only LPCM 2 channel digital audio is supported, please ensure that the
source audio is set to LPCM 2 channel audio in order to avoid unneccessary
audio noise.
13
6.6 OSD MENU
1st Layer
DISPLAY
2nd Layer
3rd Layer
640×480 60
800×600 60
1024×768 60
1280×768 60
1360×768 60
1280×720 60
1280×800 60
1280×1024 60
1440×900 60
1400×1050 60
1680×1050 60
OUTPUT
1600×1200 60
1920×1080 60
1920×1200 60
720×480P 60
1280×720P 60
1920×1080i 60
1920×1080p 60
720×576p 50
1280×720p 50
1920×1080i 50
1920×1080p 50
OVER SCAN
FULL
BEST FIT
PAN SCAN
SIZE (VIDEO mode only)
LETTER BOX
UNDER 2
UNDER 1
OFF
MODE INFO
INFO
ON
AUTO SETUP
H_POSITION
V_POSITION
PHASE
PC (PC mode only)
CLOCK
WXGA/XGA
RESET
4th Layer
XGA
WXGA
1st Layer
2nd Layer
COLOUR
COLOUR
CONTRAST
BRIGHTNESS
HUE
SATURATION
SHARPNESS
NR.
VOLUME
DELAY
SOUND
AUDIO
SDI AUDIO
AUDIO SELECT
(AV/SV/YPbPr/VGA
only)
FACTORY RESET
SETUP
KEY LOCK
POWER SAVE
INFORMATION
INPUT
OUTPUT
REVISION
Items in Bold are the default settings.
3rd Layer
R
G
B
R OFFSET
G OFFSET
B OFFSET
0~60
0~60
0~60
0~60
0~30
OFF
LOW
MIDDLE
HIGH
0~100
OFF
40ms
110ms
150ms
ON
MUTE
CH1 – CH2
CH3 – CH4
CH5 – CH6
CH7 – CH8
ANALOG
SPDIF
OFF
ON
OFF
ON
4th Layer
7. CONNECTION AND INSTALLATION
HD Satelite Receiver
SDI Camera
PC or RS-232
Control System
HDMI, Optical Digital
and Analogue Audio
Inputs
Blu-ray/DVD Player
SDI
Input
HDMI, Composite Video &
Analogue Audio Inputs
RS-232
Set-top Box
OUTPUT
L/R
OPTICAL
RS232
SERVICE 1
PC/HD
HDMI
INPUT
OPTICAL
SERVICE 2
SDI
LOOP OUTPUT
L/R
SDI
R
L
Cr/Pr
Cb/Pb
CV
R
L
SV
R
L
DC 5V
PC
HDMI 1
HDMI 2
Y
PC
VGA and Analogue Audio Inputs
Analogue
Audio
Output
Coaxial
Digital
Output
AV Receiver
16
OR
HDMI
Output
TV or Monitor
VGA
Output
Component
Output
TV or Monitor with
3.5mm audio input
SDI
Loopthrough
Output
SDI Monitor
8. SPECIFICATIONS
8.1 Technical Specifications
Input Ports
1×Composite,1×S-Video,
1×Component, 1×PC/HD, 2×HDMI,
1×SDI, 1×Optical, 4×Analogue Stereo
(L/R), 1×USB (service only), 1xMini-jack
(service only), 1xRS-232 (Control Only)
Output Ports
1×HDMI, 1×PC/HD, 1× SDI (Loop out),
1×Optical, 1×Analogue Stereo (L/R)
Supports Input Resolutions
Up to UXGA & 1080p
Supports Output Resolutions Up to WUXGA & 1080p
Power Supply
5 V/3 A DC (US/EU standards, CE/FCC/
UL certified)
Dimensions
320 mm(W) × 182 mm(D) × 44 mm(H)
Weight
1600g
Chassis Material
Metal
Silkscreen Colour
Black
Operating Temperature
0 ˚C~40 ˚C/32 ˚F~104 ˚F
Storage Temperature
−20 ˚C~60 ˚C/−4 ˚F~140 ˚F
Relative Humidity
20~90 % RH (non-condensing)
Power Consumption
10.5 W
17
8.2 Supported Input/Output Resolutions
Input
Resolution
NTSC/PAL
CV/SV
Component
PC
HDMI

480i/576i


480p/576p


[email protected]/60Hz


[email protected]/60Hz


[email protected]/60Hz


[email protected]/72/75Hz


[email protected]/60/72/75Hz


[email protected]/70/75Hz


[email protected]/75Hz


[email protected]


[email protected]


[email protected]


[email protected]


18
Output
PC/HD
HDMI
480p/576p
 (HD)

[email protected]/60Hz
 (HD)

[email protected]/60Hz
 (HD)

[email protected]/60Hz
 (HD)

[email protected]


[email protected]


[email protected]


[email protected]


[email protected]


[email protected]


[email protected]


[email protected]


[email protected]


[email protected]


[email protected]


[email protected]


Resolution
19
9. ACRONYMS
ACRONYM
COMPLETE TERM
EDID
Extended Display Identification Data
HDCP
High-bandwidth Digital Content Protectionl
HDMI
High-Definition Multimedia Interface
HDTV
High-Definition Television
OSD
On-screen Display (Menu)
SDI
Serial digital interface
USB
Universal Serial Bus
VGA
Video Graphics Array
WUXGA
Wide Ultra Extended Graphics Array
20
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement