tender form for it related hardware, software, networking products

tender form for it related hardware, software, networking products
Official use only
Tender No:
Signature:
Date of Issue:
CENTRE FOR AGRICULTURAL INFORMATION AND COMMUNICATION
TECHNOLOGY
SARDARKRUSHINAGAR DANTIWADA AGRICULTURAL UNIVERSITY
SARDARKRUSHINAGAR- 385 501
TENDER FORM FOR IT RELATED HARDWARE,
SOFTWARE, NETWORKING PRODUCTS-ACCESSORIES, SPARES,
CONSUMABLE ITEMS INCLUDING PC/LAPTOP, PERIPHERALS,
SURVEILLANCE ITEMS & NON-IT ELECTRONICS PRODUCTS WITH ALL
ESSENTIAL ACCESSORIES.
TENDER No. CAICT-1/2015-16
Tel. No.: 02748-278262
1
Tender issued to___________________________
I/c. Director,
Center for Agriculture Information and Communication Technology
Sardarkrushinagar Dantiwada Agricultural University
Sardarkrushinagar
FROM:
_______________________
_______________________
_______________________
_______________________
To
I/c. Director,
Center for Agriculture Information and Communication Technology
SardarkrushinagarDantiwada Agricultural University
Sardarkrushinagar
Sub:
Tender for the Rate Contract of IT Hardware & Software, Networking Products, Spare/Parts, Consumable Items Including
PC/Laptop, Peripherals, Surveillance Items & Non-IT Electronics Products with All Essential Accessories.
Sir,
I/We hereby submit herewith the offer (duly filled) in response to the advertisement/tender notice for the rate contract of
Software and Consumables in accordance with the terms and conditions of such supply and declare as under:1.
I/We hereby offer to supply to Sardarkrushinagar Dantiwada Agricultural University, Sardarkrushinagar in accordance
with the terms and conditions, hereto annexed and at the prices given by me/us in the Schedule-B attached.
2.
I/We enclose herewith Demand Draft No.____________ dated________ in favour of "S. D. A. U. Fund Account" for
Rs.5,000/- (Rupees Five thousand only) towards the Earnest Money Deposit payable at State bank of India,
Dantiwada.Branch (code 2760).
3.
I/We have carefully read and understood and agree to abide by the said terms and conditions set in the Schedule-A
hereto annexed and the description/size/specifications of the stores and the other relevant details as set out in the
Schedule-B of the tender.
4.
I/We agree to hold this offer open till the one year.
5.
I/We agree that in case of dispute, if any, the decision of the Vice Chancellor, Sardarkrushinagar Dantiwada Agricultural
University, Sardarkrushinagar 385 506 shall be final and binding upon me/us.
6.
Full details of my/our firm are given below:
(A)
Name of the firm:
(B)
Complete address of the firm:
(C)
(D)
Full Name and address of Proprietor/Partners/Directors together with a copy of certificates of Registration
issued by I/c. Dir IF-P&S along with signatory authority from partner:
(a) Name and Telephone No.:- Proprietor/Partners/Director/Chief Executive ________________
Tele No.__________________
(b) Sales Manager /contact persons Name & Mobile No.___________________________________
Enclosed Authorized dealer certificate for the year 2015-16.
(E)
Enclosed latest Import certificate copy in case of imported equipment.
(F)
Tele. No.________________Mobile No____________________.Email ID___________________
(G)
Fax No:- _____________
(H)
E-Mail Address__________________
(I)
Sales/TIN Tax No:-___________________
(J)
Registration No.__________________
2
(K)
License No.:-_____________________
(L)
PAN/DIN Card _________________________
(M)
Any other such details.______________
Signature of Tenderer
(with Stamp and Name
and Designation.)
NOTE: In case, the tenderer is a partnership firm, true and correct full names of the each partners together with their complete
address should be furnished. In case of death or retirement of any of the partners, intimation shall be sent immediately to
the Director, CAICT, Sardarkrushinagar Dantiwada Agricultural University, Sardarkrushinagar –385 506. Any change in
the constitution of partnership shall be intimated within 10 days.
3
SCHEDULE-'A'
TERMS AND CONDITIONS FOR SUPPLY OF SCHEDULED ITEMS
1.
General
1:1
Sealed tenders are invited by the I/c. Director, Center for Agricultural Information and Communication Technology,
Sardarkrushinagar Dantiwada Agricultural University, Sardarkrushinagar-385 506 for the rate contract of Software and
consumable items mentioned in the Tender Schedule-B and Schedule-C. The filled tender form should reach to the I/c.
Director, Agricultural Information Technology, Sardarkrushinagar Dantiwada Agricultural University, Sardarkrushinagar385 506 in an envelope superscribed as "TENDER FOR IT RELATED CONSUMABLE ITEMS" on or before Date:
11/1/2016 and Time 15.00 hrs by Registered Post /Speed Post/Courier only.
1:2
The blank tender document is available on our website www.sdau.edu.in/tender from the date of advertisement of tender
notice in news paper up to 16/12/2015.The non-refundable tender Fees Rs.500/- is to be paid by Demand Draft only in
favour of “S.D.A.U. fund Account” payable at State Bank of India, Dantiwada (Code: 2760) at the time of submission
of tenders. The tender in a form other than the prescribed or without tender fees shall be rejected outright. The rates should
be mentioned against each item of the Schedule 'B' & 'C' in the form itself and not in separate sheet or attachment, otherwise
it shall not be considered.
The tender should be accompanied by Earnest Money Deposit of Rs.5,000/- (Rupees Five thousand) only. The Earnest
Money Deposit shall be accepted by crossed Demand Draft only in favour of “S.D.A.U. fund Account” payable at State
Bank of India, Dantiwada (Code: 2760). Cheque or cash shall not be accepted.
The Earnest Money Deposit of successful tenderer will be kept up to end of validity period.
1:3
1:4
1:5
1:6
1:7
1:8
1:9
1:10
1:11
1:12
1:13
1:14
1.15
1.16
The Earnest Money Deposit shall be forfeited, if :(i)
Tenderer withdraws his offer or rates after the opening of the tender.
(ii)
Tenderer modifies rates or any terms and conditions of the original offer.
(iii)
Successful tenderer fails to supply the items within the delivery period.
(iv)
Successful tenderer fails to provide after sales service.
The items shown in the Schedule- B&C are subject to requirements, the same may or may not be purchased.
The I/c. Director, Agricultural Information and Communication Technology, Sardarkrushinagar Dantiwada Agricultural
University, Sardarkrushinagar-385 506 does not bind himself to place the order for the item(s) specified in the tender.
Tenderer shall have to execute the purchase orders for the quantity of items placed on any date during the validity of the
tender at the rate, terms and conditions of the tender.
The Schedule-B and Schedule-C shows Model and make / Company / Software and its version of the items to be procured
for which the tender has been invited. If quoted product is not at par with specification mentioned in Schedule-B and C,
please mention in the tender for not compliance with particular specification of the quoted product against the specification
mentioned in the schedule-B & C.
The tenderer will be held responsible for the package of items sufficiently and properly for transport so as to ensure their
being free from loss or injury on arrival at destination to the office/substation placing the order.
The applicable taxes and duties should be clearly stated, failing which the rates quoted in the tender shall be considered as
inclusive of all taxes and duties.
The University will not issue ‘C’ or ‘P’ form of sales tax or any type of tax relaxation form of Government and the
tenderers are therefore requested to quote the rates of sales tax or any other taxes payable in absence of such
forms/declarations.
The rate should be F.O.R. office of the University placing order. If Academic Rate of the software will be available than
quote academic rate of the software else quote other applicable rates. The normal rates quoted for software for which
Academic Rates are available shall be rejected.
The rates quoted should be legible. Pencil entries and over written entries shall be rejected.
The offers which do not conform to the conditions laid down in the tender notice shall not be considered.
Each page of tender document dully signed by the party with the stamp.
The manufacturer of the quoted product should be an ISO 9001:2000 company in the field of the concerned field.
2.
Inspection and removal of rejected items
2:1
All articles whether imported or of indigenous make shall be subject to inspection, for acceptance of articles for which
specifications and /or test have been prescribed, by a competent authority and they shall be required to conform to such
specifications and/or satisfy the prescribed test or tests which will be carried out at the time of delivery.
2:2
If any material is rejected by the competent authority due to its non conforming to the prescribed specifications or not being
in accordance with other conditions of contract and/or delivery schedule or for some valid reasons, the decision of the Vice
Chancellor, Sardarkrushinagar Dantiwada Agricultural University, Sardarkrushinagar shall be final and conclusive of any
binding on the supplier.
Any items submitted for inspection and rejected by Inspecting Officer should be replaced within ten days from the date of
2:3
4
2.4
receipt of communication to replace the same.
In case of defective items, the same shall have to be replaced by the party concerned at its own cost and risk, and within
stipulated time.
3. Payment:
3.1
Payment shall be made only after materials are supplied as per the rate and terms and conditions of contract and after
satisfactory installation and demonstration. No advance or part payment or payment through bank will be entertained.
4.
Delivery
4:1
All materials shall be delivered in good condition and as per the specifications at the store of ordering office/sub-station of
Sardarkrushinagar Dantiwada Agricultural University as per terms and conditions of the contract.
5.
Dispute
5:1
In case of any dispute, final decision of the Sardarkrushinagar Dantiwada Agricultural University, Sardarkrushinagar 385
506 will be binding upon all.
5:2
In case any dispute arises between the parties hereto in respect of this contract, a suit in that behalf shall be subject to
Palanpur/Dantiwada Jurisdiction only.
Signature of Tenderer
with Name and Designation
Stamp of the firm
Date:
I/c. Director,
Agricultural Information& Communication Technology,
Sardarkrushinagar Dantiwada Agricultural University, Sardarkrushinagar-385
506
5
Appendix-A
HEADER-SOFTWARE
Sr.
No.
1
Itemswith Description
Rate Per Unitin Rs.
(Including All taxes)
SOFTWARE
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
2.0
2.1
2.2
2.3
2.4
2.5
Total Security Latest Version Antivirus Software Single User 12/36 Months Validity (Quick
Heal)
Total Security Latest Version Antivirus Software Five Users 12/36 Months Validity (Quick
Heal)
Total Security Latest Version Antivirus Software Ten Users 12/36 Months Validity (Quick Heal)
Total Security Latest Version Antivirus Software Single User 12/36 Months Validity (Norton)
Total Security Latest Version Antivirus Software Five Users 12/36 Months Validity (Norton)
Total Security Latest Version Antivirus Software Ten Users 12/36 Months Validity (Norton)
Total Security Latest Version Antivirus Software Single User 12/36 Months Validity (K7)
Total Security Latest Version Antivirus Software Five Users 12/36 Months Validity (K7)
Total Security Latest Version Antivirus Software Ten Users 12/36 Months Validity (/K7)
Windows 7 Pro 64 Bit
Windows 8 Pro 64 Bit
Windows 10 Pro 64 Bit
Microsoft office 2007 Standard Edition
Microsoft office 2013 Standard Edition
eCOPY PRD PRO Office(PDF Editor) with 1 Yrs M&S 5 Users pack
HEADER-CONSUMABLE AND SPARE PARTS
Sr.
No.
1.
1.1.
1.2.
1.3.
2.
2.1.
2.2.
2.3.
2.4.
2.5.
2.6.
2.7.
2.8.
2.9.
2.10.
2.11.
2.12.
Items with Description
Rate Per Unit in Rs.
(Including All taxes)
DVD WRITER STANDARD BRANDS WITH 12 MONTHS ONSITE WARRANTY & INSTALLATION
External USB DVD Writer - DVD-R/W; Record Speed: 8x; DVD-RW; Rewrite Speed: 8X;
DVD+R; Record speed: 16x; DVD+R; Double Layer Record Speed: 2.4x; DVD+RW Rewrite
Speed: 8x , CD Read Speed: 40x; CD-R; Record Speed: 40x; CD-RW; Rewrite Speed: 24x
Internal DVD Writer(Desktop) SATA/e-SATA - DVD-R/W; Record Speed: 20x; DVD-RW;
Rewrite Speed: 8x ; DVD+R; Record speed: 16x ; DVD+R; Double Layer Record Speed:
2.4x; ; DVD+RW Rewrite Speed: 8x; ;CD Read Speed: 40x; CD-R; Record Speed: 40x; CDRW; Rewrite Speed: 2
Internal DVD Writer(Laptop)SATA/e-SATA - DVD-R/W; Record Speed: 20x; DVD-RW;
Rewrite Speed: 8x ; DVD+R; Record speed: 16x ; DVD+R; Double Layer Record Speed:
2.4x; ; DVD+RW Rewrite Speed: 8x; ;CD Read Speed: 40x; CD-R; Record Speed: 40x; CDRW; Rewrite Speed: 2
HARD DISK (STANDARD BRANDS WITH 24 MONTHS MINIMUM ONSITE WARRANTY & INSTALLATION)
DESKTOP HDD (HARD DISK DRIVE) 3.5”
320 GB SATA Interface Type Serial ATA (SATA) Seagate/Samsung
500 GB SATA Interface Type Serial ATA (SATA) Seagate/Samsung
1 TB SATA Interface Type Serial ATA (SATA) Seagate/Samsung
2 TB SATA Interface Type Serial ATA (SATA) Seagate/Samsung
320 GB SATA Interface Type Serial ATA (SATA) WD
500 GB SATA Interface Type Serial ATA (SATA) WD
1 TB SATA Interface Type Serial ATA (SATA) WD
2 TB SATA Interface Type Serial ATA (SATA) WD
320 GB SATA Interface Type Serial ATA (SATA) Hitachi
500 GB SATA Interface Type Serial ATA (SATA) Hitachi
1 TB SATA Interface Type Serial ATA (SATA) Hitachi
2 TB SATA Interface Type Serial ATA (SATA) Hitachi
LAPTOP HDD 2.5”
2.13.
2.14.
2.15.
2.16.
2.17.
320 GB SATA Interface Type Serial ATA (SATA) Seagate/Samsung
500 GB SATA Interface Type Serial ATA (SATA) Seagate/Samsung
1 TB SATA Interface Type Serial ATA (SATA) Seagate/Samsung
320 GB SATA Interface Type Serial ATA (SATA) WD
500 GB SATA Interface Type Serial ATA (SATA) WD
6
2.18.
2.19.
2.20.
2.21.
1 TB SATA Interface Type Serial ATA (SATA) WD
320 GB SATA Interface Type Serial ATA (SATA) Hitachi
500 GB SATA Interface Type Serial ATA (SATA) Hitachi
1 TB SATA Interface Type Serial ATA (SATA) Hitachi
EXTERNAL/POCKET/BACKUP USB 2.0 OR 3.0 - HDD
2.22.
2.23.
2.24.
2.25.
2.26.
2.27.
2.28.
2.29.
2.30.
3.
500 GB External USB 2.0 / 3.0 High Speed with all accessories Seagate
1 TB External USB 2.0 / 3.0 High Speed with all accessories Seagate
2 TB External USB 2.0 / 3.0 High Speed with all accessories Seagate
500 GB External USB 2.0 / 3.0 High Speed with all accessories WD
1 TB External USB 2.0 / 3.0 High Speed with all accessories WD
2 TB External USB 2.0 / 3.0 High Speed with all accessories WD
500 GB External USB 2.0 / 3.0 High Speed with all accessories A-DATA
1 TB External USB 2.0 / 3.0 High Speed with all accessories A-DATA
2 TB External USB 2.0 / 3.0 High Speed with all accessories A-DATA
MEMORY MODULES (STANDARD BRANDS WITH 36 MONTHS MINIMUM ONSITE WARRANTY & INSTALLATION)
Desktop Memory Modules
3.1.
3.2.
3.3.
3.4.
3.5.
3.6.
3.7.
4.
1 GB DDR-I, (400 MHz) Non-ECC (Transcend/Hynix/A-DATA/Kingston/Sandisk)
2 GB DDR-I, (400 MHz) Non-ECC (Transcend/Hynix/A-DATA/Kingston/Sandisk)
1 GB DDR2 DIMM Non-ECC (Transcend/Hynix/A-DATA/Kingston/Sandisk)
2 GB DDR2 DIMMNon-ECC (Transcend/Hynix/A-DATA/Kingston/Sandisk)
2 GB DDR3 DIMMNon-ECC (Transcend/Hynix/A-DATA/Kingston/Sandisk)
4 GB DDR3 DIMM Non-ECC (Transcend/Hynix/A-DATA/Kingston/Sandisk)
8 GB DDR3 DIMM Non-ECC(Transcend/Hynix/A-DATA/Kingston/Sandisk)
LAPTOP MEMORY MODULES
4.1.
4.2.
4.3.
4.4.
4.5.
1 GB DDR2 DIMM Non-ECC (Transcend/Hynix/A-DATA/Kingston/Sandisk)
2 GB DDR2 DIMM Non-ECC (Transcend/Hynix/A-DATA/Kingston/Sandisk)
2 GB DDR3 DIMM Non-ECC (Transcend/Hynix/A-DATA/Kingston/Sandisk)
4 GB DDR3 DIMM Non-ECC (Transcend/Hynix/A-DATA/Kingston/Sandisk)
8 GB DDR3 DIMM Non-ECC (Transcend/Hynix/A-DATA/Kingston/Sandisk)
SERVER RAM MODULES (STANDARD BRANDS WITH 36 MONTHS MINIMUM ONSITE WARRANTY & INSTALLATION)
5.
5.1.
5.2.
5.3.
5.4.
5.5.
5.6.
1GB DDR2 ECC un-buffered 533Mhz
1GB DDR1 ECC 2100 buffered
1 GB DDR2 ECC Registered 400Mhz
2GB DDR2 ECC Registered 400Mhz
2GB DDR2 fully buffered PC2-5300P ECC 667Mhz 240 pin (For Sunfire X4150 Server)
4GB DDR2 fully buffered PC2-5300P ECC 667Mhz 240 pin (For Sunfire X4150 Server)
DESKTOP SMPS – (STANDARD BRANDS WITH 12 MONTHS MINIMUM ONSITE REPLACEMENT WARRANTY & INSTALLATION)
6.
6.1
6.2
7.
7.1.
7.2.
8.
400 Watts ATX SMPS
INPUT : AC 100-240V | OTPUT : +5V +3.3V +12V -5V -12V +5V SB
450 Watts SFF SMPS
INPUT : AC 100-240V | OUTPUT : +5V +3.3V +12V -5V -12V +5V SB
UPS (STANDARD BRANDS WITH 36 MONTHS MINIMUM ONSITE WARRANTY INCLUDING BATTERY& INSTALLATION)
600 VALine-Interactive UPS 10-15 Mints Backup with Inbuilt Battery, Sine wave output,
Input power bank MOSFET, ≥80% efficiency, designed especially for IT applications such
as network closets and small data centers. Nominal Input :Single Phase, 50 Hz. Nominal
Output :Single Phase, 50 Hz.
800VA Line Interactive UPS 20-30 Mints Backup with Inbuilt Battery, Sine wave output,
and Input power bank MOSFET, ≥80% efficiency, designed especially for IT applications
such as network closets and small data centers. Nominal Input :Single Phase, 50 Hz.
Nominal Output :Single Phase, 50 Hz.
PCI LAN/ETHERNET CARD (STD. BRAND WITH 12 MONTHS MINIMUM ONSITE REPLACEMENT WARRANTY & INSTALLATION)
8.1.
8.2.
8.3.
PCI/PCIe 10/100 Ethernet Card with 1xRJ45 Ports
PCI/PCIe 10/100 Ethernet Card with 2x RJ45 Ports
PCI/PCIe 10/100/1000 Ethernet Card with 1 x RJ45 Ports
8.4.
PCI/PCIe 10/100/1000 Ethernet Card with 2 x RJ45 Ports
9.
9.1.
9.2.
PEN DRIVE (STANDARD BRANDS WITH 36 MONTHS MINIMUM ONSITE WARRANTY& REPLACEMENT)
4 GB Capacity Storage USB 2.0 or Higher speed
8 GB Capacity Storage USB 2.0 or Higher speed
7
9.3.
9.4.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
24.1.
24.2.
24.3.
24.4.
24.5.
24.6.
24.7.
24.8.
25.
25.1.
25.2.
25.3.
25.4.
26.
26.1.
26.2.
26.3.
26.4.
26.5.
26.6.
26.7.
26.8.
26.9.
26.10.
26.11.
26.12.
26.13.
26.14.
26.15.
26.16.
16 GB Capacity Storage USB 2.0 or Higher speed
32 GB Capacity Storage USB 2.0 or Higher speed
CMOS 3V Lithium Battery
Optical 2 button scroll USB Mouse with 1 Year Minimum Replacement Warranty
Logitech/Iball/HP/Lenovo/Dell
Optical 2 button scroll PS/2 Mouse with 1 Year Replacement Warranty
Logitech/Iball/HP/Lenovo/Dell
Wireless Key board & Mouse bundle with 1 Year Replacement Warranty
Logitech/Iball/HP/Lenovo/Dell
Keyboard USB with 1 Year Minimum with 1 Year Replacement Warranty
Logitech/Iball/HP/Lenovo/Dell
Keyboard PS/2 with 1 Year Replacement Warranty Logitech/Iball/HP/Lenovo/Dell
Mother Board : Intel® G41 Express Chipset with ICH7 with 1 Year Minimum Warranty
Mother Board : Intel® G31 Express Chipset with ICH7 with 1 Year Minimum Warranty
Mother Board : Intel® G945/965 Express Chipset with 1 Year Minimum Warranty
Mother Board : Intel® G865 Express Chipset with 1 Year Minimum Warranty
Mother Board : AMD CPU Supported M61PML–K with 1 Year Minimum Warranty
Mother Board : Intel® G55/61 Express Chipset with ICH7 with 1 Year Minimum Warranty
Cabinet Micro with 450W power supply: Micro tower cabinet with cooling fan, drive
bays: 2 External 5.25”; 2 External 3.5”; 2 Internal 3.5” with 1 Year Minimum Warranty
Iball/Intex/Zebronic
Cabinet with ATX 450W power supply: Micro tower cabinet with cooling fan, drive bays: 2
External 5.25”; 2 External 3.5”; 2 Internal 3.5” with 1 Year Minimum Warranty
Iball/Intex/Zebronic
LED MONITOR(STANDARD BRANDS WITH 36 MONTHS MINIMUM ONSITE WARRANTY)
18.5” LED TFT Monitor LG/Samsung/HP/Dell
19” LED TFT Monitor LG/Samsung/HP/Dell
20” LED TFT Monitor LG/Samsung/HP/Dell
22” LED TFT Monitor LG/Samsung/HP/Dell
23” NON-IPS LED TFT Monitor LG/Samsung/HP/BenQ/Dell
27” NON-IPS LED TFT Monitor LG/Samsung/HP/BenQ/Dell
23” IPS-LED Monitor LG/Samsung/HP/BenQ/Dell
27” IPS-LED Monitor LG/Samsung/HP/BenQ/Dell
BLANK CD/DVD MEDIA (STANDARD BRANDS)
700 MB Writable CD (ROM) with cover (Maximum speed) Sony/Frontech/Moserbear
4.7 GB Writable DVD (ROM) with cover (Maximum speed) Sony/Frontech/Moserbear
700 MB Re-writable CD with cover (Maximum speed) Sony/Frontech/Moserbear
4.7 GB Re-writable DVD with cover (Maximum speed) Sony/Frontech/Moserbear
NETWORKING / LAN ITEMS
D-Link/Digilink/Digisol/Netgear Blank Panel with termination and installation
D-Link/Digilink/Digisol/Netgear 24 Port Patch Panel with termination and installation
D-link CAT-6 IO for Blank Patch Panel with termination and installation
Per Mt. Laying charge within 25 mm PVC pipe on wall( Labor with PVC Pipe charge only)
Per meter D-Link/Digilink/Digisol CAT-6 UTP cable with its laying charge
D-Link/Digilink/Digisol LAN RJ-45 I/O with face plate with fixing charge
D-Link/Digilink/Digisol RJ-45 Connectors 1 box (100 nos.) Cat 6E
D-Link/Digilink/Digisol RJ-45 patch code 1 meter Cat 6E
D-Link/Digilink/Digisol RJ-45 patch code 3 meter Cat 6E
D-Link/Digilink/Digisol/Netgear 8 port 10/100 mbps switch with configuration and
installation
D-Link/Digilink/Digisol/Netgear 24port 10/100 mbps switch with configuration and
installation
D-link 3028 L2 24 port 10/100 mbps + 2 Giga port with Gbic module switch with
configuration and installation
D-link DWL-2100AP High Speed 2.4GHz (802.11g) Wireless 108Mbps Access Point with
configuration and installation
D-link DWL-3200AP 802.11g indoor wireless access point +PoE (Business class) with
configuration and installation
D-Link/Digilink/Digisol LC-SC connector fiber patch code 3 mts.
D-Link/Digilink/Digisol SC-SC connector fiber patch code 3 mts.
8
26.17.
26.18.
26.19.
27.
27.1.
27.2.
27.3.
Network Wall mount Rack 9 U - With front glass door, back louvered door, louverd side
panels, 1 cable manager, 4 plugs power strip, 2 fans fan tray, hardware mounting
packet (with termination and installation)
D-Link D-Link/Digilink/Digisol/Netgear 300 Mbps DSL Router with Double Antenna
D-Link/Digilink/Digisol/Netgear 150 Mbps ADSL Router with Single Antenna
SLA Maintenance free Batteries for UPS
12 V 42 AH Exide/Amron Quanta
12 V 28 AH Exide/Amron Quanta
12 V 26 AH Exide/Amron Quanta
9
DESKTOP PC SPECIFICATIONS FROM ITEM No.(1-5){ ASUS/ DELL/ HP/ LENOVO}
1. Desktop System with Intel G-3260 Processor with Ubuntu OS
Sr.
No.
Rate Per Unit in Rs.
Form Factor
CPU
Chipset
RAM
HDD
Ethernet
ODD/DVDRW
Keyboard / Mouse
Monitor
Warranty
OS
Graphic Card
Port
Additional Port
Benefits
Power
Consumption
DVDRW/ODD
01
02
SFF/Tower Commercial Desktop
G3260
H81
4 GB Expandable up to 16 GB
500 GB 7200 RPM
Gigabit
No
Yes
18.5" TFT
3 yrs Onsite
UBUNTU
Integrated
1 Network, 6 USB, 1VGA, 1 DI Port
PCI express
Green Certification, * ENERGY STAR 6.1, * RoHS, *WEEE
85 % Power Supply of 180 W
More efficient to the open environment
22/24X ODD Drive SATA Interface
(Including All taxes)
with Standard
Installation & Required
Accessories
2. Desktop System with Intel G-3260 Processor with Windows OS
Sr.
No.
Rate Per Unit in Rs.
Form Factor
CPU
Chipset
RAM
HDD
Ethernet
ODD/DVDRW
Keyboard / Mouse
Monitor
Warranty
OS
Graphic Card
Port
Additional Port
Benefits
Power
Consumption
DVDRW/ODD
01
02
SFF/Tower Commercial Desktop
G3260
H81
4GB Expandable up to 16 GB
500 GB 7200 RPM
Gigabit
No
Yes
18.5" TFT
3 yrs Onsite
Win 8.1 Pro
Integrated
1 Network, 6 USB, 1VGA, 1 DI Port
PCI express
Green Certification, * ENERGY STAR 6.1, * RoHS, *WEEE
85 % Power Supply of 180 W
More efficient to the open environment
22/24X ODD Drive SATA Interface
(Including All taxes)
with Standard
Installation & Required
Accessories
3. Desktop System with Intel Core i3 4170 Processor with Windows OS
Sr.
No.
01
Rate Per Unit in Rs.
Form Factor
CPU
Chipset
RAM
HDD
SFF/Tower Commercial Desktop
Core i3 4170
H81
4 GB Expandable up to 16 GB
500 GB 7200 RPM
10
(Including All taxes)
with Standard
Installation & Required
Accessories
Ethernet
ODD/DVDRW
Keyboard / Mouse
Monitor
Warranty
OS
Graphic Card
Port
Additional Port
Benefits
Power
Consumption
DVDRW/ODD
02
Gigabit
No
Yes
18.5" TFT
3 yrs Onsite
Win 8.1 Pro
Integrated
1 Network, 6 USB, 1VGA, 1 DI Port
PCI express
Green Certification, * ENERGY STAR 6.1, * RoHS, *WEEE
85 % Power Supply of 180 W
More efficient to the open environment
22/24X ODD Drive SATA Interface
4. Desktop System with Intel Core i5 4590S Processor with Windows OS
Sr.
No.
Rate Per Unit in Rs.
Form Factor
CPU
Chipset
RAM
HDD
Ethernet
ODD/DVDRW
Keyboard / Mouse
Monitor
Warranty
OS
Graphic Card
Port
Additional Port
Benefits
Power
Consumption
DVDRW/ODD
01
02
SFF/Tower Commercial Desktop
Core i5 4590S
H81
4GB Expandable up to 16 GB
500 GB 7200 RPM
Gigabit
No
Yes
18.5" TFT
3 yrs Onsite
Win 8.1 Pro
Integrated
1 Network, 6 USB, 1VGA, 1 DI Port
PCI express
Green Certification, * ENERGY STAR 6.1, * RoHS, *WEEE
85 % Power Supply of 180 W
More efficient to the open environment
22/24X ODD Drive SATA Interface
(Including All taxes)
with Standard
Installation & Required
Accessories
5. Desktop System with Intel Tower Intel i7-4790S Processor with Windows OS
Sr.
No.
01
Rate Per Unit in Rs.
Form Factor
CPU
Chipset
RAM
HDD
Ethernet
ODD/DVDRW
Keyboard / Mouse
Monitor
Warranty
OS
Graphic Card
Port
Additional Port
Benefits
Power
Consumption
SFF/Tower Commercial Desktop
Tower Intel i7-4790S
H81
4GB Expandable up to 16 GB
500 GB 7200 RPM
Gigabit
No
Yes
18.5" TFT
3 yrs Onsite
Win 8.1 Pro
Integrated
1 Network, 6 USB, 1VGA, 1 DI Port
PCI express
Green Certification, * ENERGY STAR 6.1, * RoHS, *WEEE
85 % Power Supply of 180 W, More efficient to the open
environment
11
(Including All taxes)
with Standard
Installation & Required
Accessories
02
DVDRW/ODD
22/24X ODD Drive SATA Interface
LAPTOP SPECIFICATIONS FROM ITEM No. (1-6){ASUS/ DELL/ HP/ LENOVO}
1.
Commercial Laptop with Intel PDC 3805 U with Win 8.1 Pro OS
Sr. No.
Rate Per Unit in Rs. (Including All
FORM FACTOR
01
14 " COMMERCIAL LAPTOP
CPU
PDC 3805 U
RAM
4 GB Expandable up to 16 GB
HDD
500 GB 7200 RPM
Ethernet
Gigabit
ODD
DVD RW
Screen
taxes) with Standard Installation &
Required Accessories
14" HD LED
Warranty
OS
Graphic Card
3 Yrs. Onsite
Win 8.1 Pro
Integrated
1 Network, 2 USB 3.0 & 2 USB 2.0 , 1VGA, 1
Ports & Other Integrated
HDMI, WI-FI, Camera, Audio with Integrated
Accessories Parts
Speaker
Additional
Metal Hinges, Finger Print reader
Safety: CB, UL/cUL, NOM, PAI, N-MARK, KENYA, CCC, RuByKz,
Certific
UKSERT, KVALITET, SABS, SASO, STZ, INSM, BIS, SONCAP, EMC: CE,
ation
FCC, VCCI, BSMI, KCC, C-Tick, Environment: PEP, CECP, CELP, CEL,
BCS, E-standby, ENERGY STAR
Battery Back up
Up to 7 Hours
2.
Commercial Laptop with Intel Core i3 - 5005U (2.0 Ghz) with Windows 8.1 Pro OS
Sr. No.
02
Rate Per Unit in Rs. (Including All
FORM FACTOR
CPU
RAM
HDD
Ethernet
ODD
14 " COMMERCIAL LAPTOP
Intel Core i3 - 5005U (2.0 Ghz)
4GB Expandable up to 16 GB
500 GB 7200 RPM
Gigabit
DVD RW
taxes) with Standard Installation &
Required Accessories
Screen
14" HD LED
Warranty
3 yrs Onsite
OS
Win 8.1 Pro
Graphic Card
Integrated
Ports & Other Integrated 1 Network, 2 USB 3.0 & 2 USB 2.0 , 1VGA, 1 HDMI, WIAccessories Parts
FI, Camera, Audio with Integrated Speaker
Additional
Metal Hinges, Finger Print reader
Safety: CB, UL/cUL, NOM, PAI, N-MARK, KENYA, CCC,
RuByKz, UKSERT, KVALITET, SABS, SASO, STZ, INSM, BIS,
Certification
SONCAP, EMC: CE, FCC, VCCI, BSMI, KCC, C-Tick
Environment: PEP, CECP, CELP, CEL, BCS, E-standby,
ENERGY STAR
Battery Back up
Upto 7 Hours
3.
Sr. No.
03
Laptop with Intel Core i3 - 5005U (2.0 Ghz) with Win 8.1 SL OS
15.6" CONSUMER SERIES LAPTOP
FORM FACTOR
CPU
RAM
HDD
Ethernet
ODD
Rate Per Unit in Rs. (Including All
taxes) with Standard Installation &
Required Accessories
Intel Core i3 - 5005U (2.0 Ghz)
4 GB Expandable up to 8 GB
1 TB 7200 RPM
Gigabit
DVR RW
12
Screen
15.6"LED
Warranty
1 Yr
OS
Win 8.1 Single Language
Graphic Card
Integrated
Ports & Other Integrated
720Pixel HD WC/USB 3.0/CR/Dolby Audio with
Accessories Parts
Integrated Speaker, WI-FI
Certification
Safety : CE, FCC, VCCI, UL/cUL, NOM,
Battery Back up
Up to 4 hours
4.
Sr No.
5.
Sr No.
Laptop with Intel Core i5 - 5200U (2.2 Ghz) with Win8.1 SL OS & Dedicated Graphics
15.6" CONSUMER SERIES LAPTOP
Rate Per Unit in Rs. (Including All taxes)
with Standard Installation & Required
FORM FACTOR
Accessories
CPU
Intel Core i5 - 5200U (2.2 Ghz)
RAM
4 GB Expandable up to 8 GB
HDD
1 TB7200 RPM
Ethernet
Gigabit
ODD
DVR RW
Screen
15.6"LED
Warranty
1 Yr
OS
Win 8.1 Single Language
Graphic Card
2GB ATI LER5 M230 DDR3
Ports & Other Integrated
720Pixel HD WC/USB 3.0/CR/Dolby
Accessories Parts
Audio with Integrated Speaker, WI-FI
Certification
Safety : CE, FCC, VCCI, UL/cUL, NOM,
Battery Back up
Up to 4 hours
Laptop with Intel PQC N3540 (2.16 GHZ) with Win 8.1 SL OS
15.6" CONSUMER SERIES LAPTOP
FORM FACTOR
CPU
RAM
HDD
Ethernet
ODD
Screen
Rate Per Unit in Rs. (Including All taxes)
with Standard Installation & Required
Accessories
Intel PQC N3540 (2.16 GHZ)
2 GB Expandable up to 8 GB
500 GB7200 RPM
Gigabit
DVR RW
15.6"LED
1 Yr
Warranty
OS
Win 8.1 Single Language
Integrated
Graphic Card
Ports & Other Integrated
HDMI/HD Cam/USB 3.0/DVD RW, WIAccessories Parts
FI, Audio with Integrated Speaker
Certification
Safety : CE, FCC, VCCI, UL/cUL, NOM,
Battery Back up
Up to 4 hours
6.
Sr No.
Laptop with Intel Core I-3 4010U with Win 8.1 SL & 11.6"HD (Touch)
11.6"HD (Touch)
FORM FACTOR
CPU
Intel Core I-3 4010U
RAM
4 GB Expandable up to 8 GB
HDD
500 GB7200 RPM
Ethernet
Gigabit
ODD
NO ODD
Screen
11.6” HD Touch "LED 1366 x 768
Warranty
1 Yr International
OS
Win 8.1 Single Language
Graphic Card
Intel HD Graphics
Ports & Other Integrated
HDMI/HD Cam/USB 3.0/, WI-FI, Audio
Accessories Parts
with Integrated Speaker/ 802.11abg
Certification
Safety : CE, FCC, VCCI, UL/cUL, NOM,
13
Rate Per Unit in Rs. (Including All taxes)
with Standard Installation & Required
Accessories
Battery Back up
7.
3-Cell- Li-Polymer Up to 4 hours
Laptop with Intel CDC N2840 with 11.6"HD
11.6"HD
Sr No.
Rate Per Unit in Rs. (Including All taxes)
FORM FACTOR
CPU
Intel CDC N2840
2
GB
Expandable
up to 8 GB
RAM
HDD
500 GB7200 RPM
Ethernet
Gigabit
ODD
NO ODD
Screen
11.6” HD LED 1366 x 768
Warranty
1 Yr International
OS
Win 8.1 Single Language
Graphic Card
Intel HD Graphics
Ports & Other Integrated
HDMI/HD Cam/USB 3.0/, WI-FI, Audio
Accessories Parts
with Integrated Speaker/ 802.11abg
Certification
Safety : CE, FCC, VCCI, UL/cUL, NOM,
Battery Back up
3-Cell- Li-Polymer Up to 4 hours
with Standard Installation & Required
Accessories
PRINTER & AIO SPECIFICATIONS FROM ITEM No. (1-3){CANON/HP/Samsung}
1. Printer (Mono Single Function)
Rate Per Unit in Rs. (Including All
Printer Type
Function
Color
duplex
Resolution
PPM
Connectivity
Paper Size
Duty Cycle
Warranty
taxes) with Standard Installation &
Required Accessories
LaserJet Technology
Single Function
Mono
Yes
600X600 (Max 1200x600)
18 PPM or more
USB
A4
Up to 2100 PGS per Toner
1 Year
2.
Printer (Mono Multi-Function)
Rate Per Unit in Rs. (Including All
Printer Type
Function
Color
duplex
Resolution
PPM
Connectivity
Paper Size
Duty Cycle
Warranty
taxes) with Standard Installation &
Required Accessories
LaserJet Technology
Multifunction
Mono
Yes
600X600 (Max 1200x600)
18 PPM or more
USB
A4
Up to 2100 PGS per Toner
1 Year
3. Color Printer Ink Tank - Multi-Function
Rate Per Unit in Rs. (Including All
Printer Type
Function
Color
duplex
Resolution
taxes) with Standard Installation &
Required Accessories
Ink Tank Technology
Multifunction
Color
No
Max 4800 X 1200 DPI
14
PPM
Connectivity
Paper Size
Duty Cycle
Black- & ColorUSB (Wireless Optional)
A4
Up to 6000 Pgs. Black and 7000 Color
1 Year
Warranty
4.Mono laserPrinter Network & Duplex
Rate Per Unit in Rs. (Including All
Details
Specifications
Function
Printer with inbuilt duplex and network support;
Optional Mobile Printing support
Media Segment
A4
Duty Cycle in Pages
8,000
Speed in PPM-Black
25 ppm on A4
FPO - Secs.
< 06 secs
Warm Up time
10 secs
USB Direct Print
No
MEAP Enabled
No
Canon uniFLOW Compatible
No
Display
No
Inbuilt Duplex
Media Size supporting
Duplex
Mem.Std.
Automatic
Mem.Max.
64 MB
Memory MAP
One Internal Fixed
Trays Std.
2
Trays Max
2
Input Capacity Std.
251 sheets (250 + 1)
Input Capacity Max.
251 sheets (250 + 1)
Output Capacity Std.
100 sheets
Output Capacity Max.
100 sheets
Media Weights
64 till 180 gsm
Connect.Std.
USB, Network
Network Inbuilt
Yes (10/100)
WIFI / M Print support
No
Expansion Board Slot
None
Resolution
600x600 dpi
Effective Resolution
1200x1200 dpi ; 2400x600 dpi ;
Processor
Integrated
Languages
UFR II LT
Font Support
NA
Optional Language Support
None
Media Used
All paper based laser supportive media upto 180 gsm
Custom Media Size (Only
through Manual Tray
Width: 76.2 - 215.9mm; Length: 127.0 - 355.6mm
Standard Operating System
Windows, MAC, (Linux support awaited)
taxes) with Standard Installation &
Required Accessories
A4, Letter, Legal
64 MB
15
Network Operating System
None
Consumables
Toner Cartridges
Accessories (if any)
Cables
Power Requirement
220 – 240V (+/-10%), 50/60Hz (+/-2Hz)
Maximum Power
Consumption
Power Consumption
(Active)
Power Consumption
(Standby)
Acoustics
1100 watts
420 watts
1.4 watts
< 52 dB(A))
Operating Temperature
10 to 30 dC
Operating Humidity
20% to 80% RH
Weight
07 Kg.
Dimensions
379 x 293 x 243mm
Black Cartridge Number
Cartridge 326
Black Cart.Yield
900 pages starter; 2100 pages standard
HD Black Cartridge Yield
NA
Warranty
2 years Onsite
10KVA ONLINE UPS SYSTEMS WITH BATTERYSPECIFICATIONS (Item No 1-5)
Sr.no
UPS Description
Rate Per Unit in Rs. (Including All
taxes) with Standard Installation &
Required Accessories
1.
2.
Rating:- 10KVA UPS System
 Double conversion System.
 Advanced DSP controlled SPWM technology with IGBTs
 Inbuilt True Galvanic Isolation Transformer design
 ECO Mode and EPO function as standard
 Intelligent Fan Speed Control system
 DC Cold start feature as standard
Nominal Input: Single Phase, 50 Hz.
Nominal Output: Single Phase, 50 Hz.
b) Backup & Battery
100-120Min. battery back up on full load with sealed maintenance free
batteries with all accessories & Battery rack
Make:Exide/Quanta (Amararaja) / Rocket Rating: 12 V / 130Ah / 15 Nos.
Accessories :Double powder coated battery rack, All inter connection
battery link, Termination box,
Rating:- 10KVA UPS System
 Double conversion System.
 Advanced DSP controlled SPWM technology with IGBTs
 Inbuilt True Galvanic Isolation Transformer design
 ECO Mode and EPO function as standard
 Intelligent Fan Speed Control system
 DC Cold start feature as standard
Nominal Input: Three Phase, 50 Hz.
Nominal Output: Single Phase, 50 Hz.
b) Backup & Battery
100-120Min. battery back up on full load with sealed maintenance free
batteries with all accessories & Battery rack
Make::Exide/Quanta (Amararaja) / Rocket Rating: 12 V / 65Ah / 30 Nos.
Accessories :Double powder coated battery rack, All inter connection
battery link, Termination box,
16
3.
Rating:- 10KVA UPS System
 Double conversion System.
 Advanced DSP controlled SPWM technology with IGBTs
 Inbuilt True Galvanic Isolation Transformer design
 ECO Mode and EPO function as standard
 Intelligent Fan Speed Control system
 DC Cold start feature as standard
Nominal Input:Three Phase, 50 Hz.
Nominal Output:Three Phase, 50 Hz.
b) Backup & Battery
100-120Min. battery back up on full load with sealed maintenance free
batteries with all accessories & Battery rack
Make: :Exide/Quanta (Amararaja) / Rocket Rating: 12 V / 100Ah / 20 Nos.
Accessories :Double powder coated battery rack, All inter connection
battery link, Termination box,
4.
Rating:- 3KVA UPS System
 Most advanced Digital Microprocessor based SPWM Technology
using IGBT
 Provision for Internal Battery
 Advanced Power Factor Correction
 EMI / RFI Filters at Input and Output
 Inbuilt Static Bypass
 SNMP Compatible
 Self-diagnosis at UPS Startup
 Advance Battery Management
 input power factor ≥0.98

Lightening & Surge Protection
Nominal Input:Single Phase, 50 Hz.
Nominal Output :Single Phase, 50 Hz.
Rating:- 5KVA UPS System
 True On-Line Double Conversion Technology
 Inbuilt isolation transformer
 Pure Sine Wave Output
 High Frequency PWM Inverter
 Excellent dynamic response for step load change
 Fast automatic correction rate for line and load regulation
 High inrush / peak current handling capacity
Nominal Input:Single Phase, 50 Hz.
Nominal Output : Single Phase, 50 Hz.
5.
42” LED-IPS DISPLAY SPECIFICATIONS (BENQ/LG/SAMSUNG)
Rate Per Unit in Rs.
Sr.
Parameters
Technical Specifications
1
Panel Technology
2
Screen Size
3
Input
4
Output
5
External Control
6
Orientation
7
Native Resolution
8
Contrast Ratio
1100;1
9
Viewing Angle
178 * 178
10
Aspect Ratio
11
Brightness
350 cd/m2 or above
12
Speakers
Inbuilt (10w * 2)
LED IPS
42" or Above
VGA * 1,HDMI * 1, DVI-D * 1,USB * 1, AUDIO * 1
External Speaker Out
RS 232 (In & Out both require) ,RJ 45 * 1
Landscape / Portrait
1920 X 1080 and above
16;9
17
Compliance (Yes /
No)
(Including All taxes)
with Standard
Installation &
Required Accessories
13
Power Supply
100 to 240 VAC
14
15
Power consumption
Energy Star certificate
60W (Type)
Energy Star 6.0
17
Authorized Service
Centre
18
19
20
21
Warranty
Standard wall mount
installation
Signage Software
Integrated Media
Player
Yes (Minimum 4 OEM Service Centre require in
Gujarat)
3 Years
Yes
Yes.
Yes Inbuilt
CCTV CAMERA SPECIFICATIONS
Scope of work
The CCTV Total Solution System should allow for video to be extreme on a NDVR/DVR. The system should allow for live view, play
back & system configuration of the IP & Non video with Hybrid system. System simultaneous live picture connections of camera in
network. It should be capable of showing Video pane layouts including 2x2, 3x3, 4x4 various hot spots (1+5, 1+7) and custom layout.
The remote maintenance of IP Video components should be supported. The system should provide video lock out facilities where a
super users can prevent all other users from viewing live videos and divert recorded video to another network video recorder. The
super user shall also be able to release the video lockout and restore the system to its original state.
Live display of camera sequence, salvos, and guard tours, Retrieval of archived video is using normal play back, thumbnails (events
of time based) for each camera setup bit rate, frame rate, and resolution shall be set independent of their camera in the system.
Alter the setting of once shall not affect the settings of the other cameras.
The system should be able to carry out a motion search on recorded video and height light motion in the play back bar and also as
motion event based thumbnails to navigate straight to the event in recording.
The system should also be able to prepare locks and MIS reports of all the activities happening on the system.
It should have facilities for playing, forward, rewind, pause along with fast forward and reviewing for reviewing the recorded video.
The DVR/NVR/ Recorders should support minimum 8, 16 & 32 cameras adequate should be incorporated in the recorder depending
of model selections. It should be capable of 5x5 or more viewing panes at 16 frames integrated video management on Real time
video analysis even in capture and creation of metadata indexing.
Advance searching capabilities with open frame works for integrating censor and even steams must be there in
DVR/NDR/Recorders. Mounting accessories for DVR/NVR/ Recorders, Cameras Indoor/Outdoor, switches, power supply, monitors,
TVs at station Etc. and connecting accessories for all as required in lot. Installation, testing & commissioning of the complete CCTV
system with UAT.
Bidder is required to supply, installation & commissioning of CCTV Surveillance system for SDAU & Its Campus including blocks,
gates, parking, circles, entry gate, building & floor including sub stations depending on the scope of Locations.
The scope of complete work would broadly be; design, engineering, supply, testing, installation, integration, commission &
maintenance of all projects deliverable.
Exact position of the camera while installation shall be instruction & Coordination by the IT Office, SDAU, SK Nagar, Dantiwada.385506
VIDEO SURVEILLANCE
1.
2.
3.
4.
5.
The scope of work under the security surveillance system shall consist of design, supply, installation, testing & commissioning of
a latest state of art ONVIF/PISA complied open plate form video management system, IP CCTV Surveillance system & entry, exit,
Periphery of building and inside the common corridor of the building through IP Network.
The purpose of the surveillance system is to monitor & supervise the entire with the monitoring of the periphery of the
building, entry/exit & corridor movement tracking along with general surveillance of the building.
Any movement in the surveillance zone shall be monitored and watched live with recording & backup for 30 Days maximum.
The intruder’s movement with Motion detector sensors of installed cameras will be used for tracking, Closed Zooming,
recording and viewed in Building wise Local as well as in a central control room, manage by Surveillance team.
Further action will be taken by control room and quick response team, apart from the monitoring and supervising the
designated area, the proposed solution should recorded and inform official on un wanted, untoward incidents. Supplier should
provide the system functions and features that the optimum utilization of VSS (Video Surveillance System) can be work out
during the implementation of phase to phase priorities.
18
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
The suppler should provide the list of other hardware System required in monitoring/supervising Control Room which may not
be included in this Tender like external storage, PC work station, Large Display Units etc. can be arrange later on.
The solution should provide the facilities to monitor the all areas from the main control room. The video analytical facilities will
be available at main control room
Main control room will be store the video/images/data for in storage. The solution should be intelligent to manage the storage
to keep the data as first in first out basis. The event data should be backed up on DVD /CD /External Storage archives purpose at
main control room.
Requirement is intended to design, supply, installation, testing & commissioning of IP CCTV system with ONVIF complied high
speed HD CCTV Fix DOME/Fix HD IP Dome Camera & BULLET camera with suitable video analytic CCTV Total Solution System
and video management system CCTV Total Solution System, storage system Etc. all the field equipment’s shall be with suitable
rugged housing so that during the regular cleaning and maintenance process the system operation is not affected.
The specification cover the requirement for the design, material supply, testing, inspection, shipping, installation and
commissioning of IP Closed Circuit Television-CCTV.
In the event of any conflicts between this specification, Data sheets, related standards, code Etc., the supplier shall refer the
matters to the purchaser for clarifications and only after obtaining the same should proceed with manufacture of the items in
the question.
The offered CCTV system shall be with an open protocol with IP network centric function and management architecture aimed
at providing high speed manual/automatic operations for best performance.
The system shall use videos signals from camera located at different locations, process them for viewing on
Display/Workstation & monitors at control room and designated room and simultaneously record all the cameras after suitable
compression.
Mouse –keyboard shall be used for pain, tilts, zoom & other functions of designed cameras.
The system shall have IP camera, DVR/NVR/Recorder with Surveillance Hard Disc Drive or equivalent recording arrangement for
recording with protection, application with Total Solution System for system administration/ management/ maintenance etc.
The Camera are IP & Non IP Hybrid based, however the cameras shall run on common off the shelf available open Source
Firmware from ( DVR/NVR/Recorder Database)
The proposed system /camera server shall be able to handle at least 08/16/32 camera to meet the present & future
requirements.
The DVR/NVR/Recorder shall offer both videos stream management and video stream storage management.
Recording frame rate and resolution in respect of individual channel shall be programmable.
Recorder System should insure that once captured and recorded, the video could be altered/edited insuring the audit trail is
intact for evidential purposes.
CCTV DVR/NVR/Recorder System shall provide required storage of all the camera recording for better quality using necessary
compression technique, the video shall be compressed using H.264 or batter comparison technique and steam over the IP
network.
The recording resolution and framed rate for each camera shall be user programmable.
SYSTEM CONFIGURATION
1.
2.
3.
Camera shall be used for the image & video capturing both.
DVR/NVR/Recorder, monitors & all peripherals will be installed in main/Local/central control room
The system shall include all hardware’s, wiring, cabinets, materials and application CCTV Total Solution System for fully
functional system as defined in the requisition.
4. Components shall be of industrial quality & consumer electronic electronics is not allowed.
5. The entire camera recording shall have camera ID & location/area of recording as well as date/time stamp.
6. Camera Id, location / area of recording and date /time shall be programmable by the system administrator with user id and
password. System should have facilities of additional camera installations beyond the original planed capacities.
7. In order to optimized the memory while recording, video shall be composed using H.264 / or better standard and stream over
IP network. Once on the network, Video can be viewed on a control room or in any designed room and shall be recorded on
dedicated storage device.
8. System shall be triplex I.E. it is provide facilities viewing, recording and reply simultaneously.
9. The offered system shall have facilities of export the desired portion of the clipping/from a desired data/ date/time to another
desired date/time on DVD/CD/external USB supported Devices.
10. CCTV Solution System should be capable of playing VCD/DVD with audio for displaying DAT/MPEG/MP4 video file for
safety/environment/occupational health related training program. System should be able to manually entered notifications
from time to time/ information kiosks.
11. Administrator should have the facilities of control of cameras (Dome/Bullet), selections of cameras and viewing in multiwindows / single screen in large view. It can be program with systems without any additional CCTV Total Solution
System/shareware cost.
19
SYSTEM DESIGN
1.
IP camera outputs will be connected to local network switch each network switch will be inter connected with the adjacent
switches through a fiber optic / Ethernet network. The network will be connected to central monitoring station at main CCYV
control room. The CCTV system shall be capable for communicating the video streams for recording at main control room over
external storage @20- 25FPS / better.
2. It should be user selectable as per requirement for each individual camera.
3. There should be arrangement of potential free alarm inputs to interface with other system. The cameras and related CCTV Total
Solution System able to act upon that to monitor the respective area in case the alarm input from other system is received.
4. The complete system shall be on IP with latest hardware and CCTV Total Solution System. All the components of the CCYV shall
be IP V6 compliant. The system shall be monitored on Quad screen. Each camera shall have the capabilities to re-record at
4CIF25FPS.
5. DVR/NVR/Recorder / PC workstation with External Storage Disc/NAS, printer will be there at control room. Required inter
connecting cables (Power/OFC/Video/Data/LAN Cable) Etc. Between power distribution boards (PDB), Monitors, Main Control
units (PC Workstation), Media Converter if any, at control room may be properly considered.
6. Control room shall have workstations along with camera operator for monitoring purpose, PC with HD Led monitors shall be
setup with suitable monitoring, arrangement as per user’s requirement. Facilities for viewing controlling all the cameras at
various locations, to be provided if required.
7. There shall be a control system with video control CCTV Total Solution System to manage all the data and video signals.
8. PC shall keep tracks of all configurations and event and in turn will help in system administration.
9. Video stream from individual cameras shall be recorded on DVR/NVR/Recorder and sub sequentially archives to NAS / External
backup device. System shall automatically over –right the new information & necessary scrip algorithm must be available in the
applications.
10. All the DVR/NVR/Recorder should be with total Solution System to view & control the cameras, encodes & retrieve the
recorded video image from the Internal/External Source/NAS/ backup device seamlessly.
11. The successful bidder has to provide onsite warranty for all equipment’s as mentioned in RFP.
Support requirement and SLAs.
1. The SI shall provide onsite support for a period of 1 Year from date of Installation & Implementations. SI shall insure
comprehensive maintenance, troubleshooting & repair of all CCTV.
2. Equipment’s supplied and covered under the contract, including replacement of parts as may be required to make the
system operational availability system is paramount and the SI shall be responsible for insuring the same.
3. These SLAs are mandatory and obligatory for SI’s to meet with an exception of dependency on power supply and end
users infrastructure availabilities shall be determined by availabilities of system and not at end users machine.
4. The response time & resolution time requirement are as per the table below.
Items
Response time
Maximum Time
IP Camera
24 Hr
48 Hr
NVR/DVR/HDD
24 Hr
48 Hr
Non IP Camera
24 Hr
48 Hr
5.
6.
7.
8.
The vendor shall be responsible for maintain the desired performance & availabilities of the system/services. Vender
should insure the prompt service support during warranty period.
If complain is made before 2 PM of the working day, the same should be attended within 24 Hr.
In case problem is related to man power supply or switching of requirement by user, the same will be exempted from
penalty implications, in such cases vender is required to produce written documentary evidence as a proof of power
failure /switching of the equipment’s from the users.
Penalties non-compliance of the response time and resolution time would attract a penalty will be calculated on per
incident basis. Penalty of Rs. 1,000/- per day will be revised for every day the component remains down beyond the
stipulated resolution with an overall cap of 5% of the contract value from the PBG submitted. SI has to provide 10%
PBG and sign SLA with department.
PROBLEM REPORTING AND RESOLUTION PROCEDURE
1.
2.
3.
4.
5.
The problem reported by the user will be logged with existing On Service & Maintenance vender.
The O&M Vender shall troubleshoot the problem and try to revolve the same.
If it is found that the problem pertains to hardware/CCTV /Firmware of the equipment supplied and installed by the SI, the
O&M vendor will report the problem to the SI.
The SI’s engineer shall attend to the problem within the stipulated response time.
The SI shall resolve problem within the stipulated resolution time. Resolution time is the time taken by SI to resolve the
reported problem, calculated from the time the call was reported by the O&M vender.
20
In case of Total down Hardware, SI/Vendor required to give replacement immediately or a Loan Based Stand by Solutions within
Minimum 24 Hrs. & Maximum 48 Hrs. (including Holiday if any).
Camera Specification
Sr.
No
01
02
03
Type
IR Bullet
HD IP Fixed
outdoorWater
Proof Camera to
installed to work
in Very Low as
well as in Bright,
Light Conditions
H.264 for better
Compressed
output,
Operative
Temp.- 0 Deg. to
50 deg. with
housing, Note:
Vendor has to
clearly mention
Make & Model
of the offered
Camera in the
Vendor
Compliance
Column
IR Dome Non IP
Fix Dome Non
Metallic , should
work in Very
Low as well as in
Bright, Light
Conditions,
Note: Vendor
has to clearly
mention Make
& Model of the
offered Camera
in the Vendor
Compliance
Column
IR Bullet 1/3
Fixed outdoor
Water Proof
Camera to
installed to work
in Very Low as
well as in Bright,
Light Conditions
H.264 for better
Compressed
output,
Operative
Temp.- 0 Deg. to
50 deg. with
housing, Note:
Vendor has to
clearly mention
Make & Model
Res.
Image Sensor
25/30fps
@720P
1/2.9" 1Megapixel
HQIS Pro Image
Device Sensor,
Interline Transfer ½.9”
or 1/3” CCD/CMOS,
Progressive Scan,
Active 1 MP,
Resolution720Px480P, Aspect
Ratio 4:3, 16:9
25/30fps
@720P
25/30fps
@1080P
1/2.9" 1Megapixel
HQIS Pro
1/2.7" 2Megapixel
HQIS Pro
Lens
Varifocal
lens 3.6
mm
3.6 mm
3.6 mm
21
IR
ICR
IP
Rating
IR Illuminator
650nm Wave
length,
Effective
distance 20 M,
Yes, Focus
Auto,
Back Light
Compensat
ionDay &
Night
Selection
auto
ON/OFF
IP66Di
ecast
Alloy
IR Illuminator
20 M850 nm
Wave length,
Effective
distance 20 M
Yes, Focus
Auto,
Back Light
Compensat
ion Day &
Night
Selection
auto
ON/OFF
N/A
IR Illuminator
12 IR Led850
nm Wave
length,
Effective
distance 30 M
Yes, Focus
Auto,
Back Light
Compensat
ion Day &
Night
Selection
auto
ON/OFF
N/A
Rate Per
Unit in Rs.
(Including
All taxes)
04
05
of the offered
Camera in the
Vendor
Compliance
Column
IR Dome 1/3
HD 1080P Non
IP Fix Dome,
should work in
Very Low as well
as in Bright,
Light Conditions,
Note: Vendor
has to clearly
mention Make
& Model of the
offered Camera
in the Vendor
Compliance
Column
IR Bullet HD IP
Fixed 1/3
outdoor
Water Proof
Camera to
installed to work
in Very Low as
well as in Bright,
Light Conditions
H.264 for better
Compressed
output,
Operative
Temp.- 0 Deg. to
50 deg. with
housing, Note:
Vendor has to
clearly mention
Make & Model
of the offered
Camera in the
Vendor
Compliance
Column
25/30fps
@1080P
1/3" 2Megapixel HQIS
Pro
Interline Transfer1/3”
or 1/3” CCD/CMOS,
Progressive Scan,
Active 2 MP,
Resolution-active P:
[email protected]
25/30FPS. 2MP,
Aspect Ratio 4:3, 16:9
25/30fps
@1080P
1/3" 2Megapixel HQIS
Pro
2 Megapixel HQIS Pro
Image Device Sensor,
Interline Transfer ½.9”
or 1/3” CCD/CMOS,
Progressive Scan,
Active 2 MP,
Resolution1080P:1920x1080P,
1280x720P D1:
720x480P, Aspect
Ratio 4:3, 16:9
Channels/Resolution
8Channel
@D1/720p/1080p/3MP/
5MP
16 Channel
@D1/720p/1080p/3MP/
5MP
8 Channel x 4 HDCVI
with Remote
3.6 mm
Varifocal
lens 3.6
mm
IR Illuminator
12 IR Led850
nm Wave
length,
Effective
distance 45 M
Yes Focus
Auto,
Back Light
Compensat
ion Day &
Night
Selection
auto
ON/OFF
N/A
12 IR Led
850 nm Wave
length,
Effective
distance 45 M,
Yes Focus
Auto,
Back Light
Compensat
ion Day &
Night
Selection
auto
ON/OFF
IP66
Diecast
Alloy
NVR/DVR/RECORDER SPECIFICATIONS
NVR/DVR/RECORDER Descriptions
Recording/
HDD
Playback
Transfer Rate
Ports
8Channel @D1/720p,
80Mbps/80Mb
[email protected]/3MP, 2
1SATA
ps
channel @5Mp
16 channel @D1,
128Mbps/128
8Channel @720p,
2
Mbps
4Channel @1080p/3MP, SATA
[email protected]
[email protected]
8 Channel/3 channel
Audio/Four Audio In
22
2
SATA
RS
485
NO
NO
Yes
Rate Per Unit in Rs.
(Including All taxes)
16 channel Tribrid HDCVI
[email protected]
with Remote Metal
[email protected]
Body
32 channel Tribrid HDCVI
[email protected]
with Remote Metal
[email protected]
Body
16 channel/1 Audio
channel
2
SATA
32 channel/4 Audio
channel
2
SATA
Yes
Yes
SURVEILLANCE RELATED OTHER REQUIRED ACCESSORIES
Sr. No.
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
Items
Power Cable with Pin CCTV Standard Brand
A/V 3+1 Cable Copper 90mt ISI Standard Brand
Power Supply 12 Amp Standard Brand
1 TB Hard Disk Drive SATA Port Enable Surveillance
2 TB Hard Disk Drive SATA Port Enable Surveillance
BNC Gold Connector Standard Brand
Mike (Standard Brand)
22” LED Monitor with VGA/HDMI/DVI Ports Standard Brand with wall
Mount Kit
Cat 6 Cable 305mt Bundle Standard Brand
RJ 45 Connectors 1 Box (500Pics) Standard Brand
Power Supply 5 Amp Standard Brand
600VA UPS with 15-20 mints Backup Standard Brand
Pipe PVC 1/2
HD Genolises Pipe Standard Brand 1/2
½” PVC Cashing
Rack 4 U with Cable Manager & Required Accessories Standard Brand
VIDEO SINGAL AMPLIFIER
LAN Injector
Cabling Lying Charges Per Running Mt
Cabling Lying Charges Per Running Mt Hard Digging
Other accessories required if any Price in Bundle
Housing for CCTV Dome Camera-Metallic Body for Outdoor Ceiling/wall
mount Box for Camera safely
Housing for CCTV Bullet Camera-Metallic Body for Outdoor Ceiling/wall
mount Box for Camera safely
Installation Charges Per Camera
Installation Charges-Per DVR
Rate Per Unit in Rs. (Including All taxes)
BIOMETRIC SPECIFICATIONS
Sr
No
Rate Per Unit
in Rs.
Fingerprint
capacity
01
Storage Capacity
Identification Mode
Recognition
Ways
Communication
03
Fingerprint, Password
and ID Card with Mono
1:1, 1:N
USB and TCP/IP
Display 2.5” or Above
Fingerprint, Password
1000
100,000
and ID card with Color
1:1, 1:N
USB and TCP/IP
Display 2.5” or Above
White Smart ID Card including Employees Details Printing & Job Completion Works Per Unit
04
Delivery, Installation & Commissioning Charges at SDAU with 12 Months Minimum
1000
02
(Including All
taxes) with
Standard
Installation &
Required
Accessories
100,000
MULTI MEDIA PROJECTORSPECIFICATIONS (Item No. 1-3){BenQ/Epson/Panasonic}
1. Projector with 3200 Lumens
Detail
Specifications & Details
23
Rate Per Unit in Rs.
(Including All taxes) with
Standard Installation &
Required Accessories
Technology
RGB liquid crystal shutter projection system
Resolution
XGA
Brightness
2700 Lumens
Contrast Ratio
15,000 : 1
Sound Output
2W Monaural
Analog- Input D-Sub 15pin - 1 (Blue molding), Composite RCA - 1 (Yellow)
S-Video - 1, Digital Input - HDMI - 1 (MHL not supported)
Audio Input -2 RCA (White / Red)- 1
USB Interface - USB Type A - 1 (for USB Memory, Document Camera, Wireless
LAN, Firmware Update), USB Type B 1 (for USB Display, Mouse, K/B, Control,
Firmware Update), Network - Wireless - Optional (ELPAP10)
Connectivity
2. Projector with 2700 Lumens
Rate Per Unit in Rs.
Detail
Specifications & Details
Technology
RGB liquid crystal shutter projection system
Resolution
XGA
Brightness
2700 Lumens
Contrast Ratio
15,000 : 1
Sound Output
2W Monaural
Analog- Input D-Sub 15pin - 1 (Blue molding), Composite RCA - 1 (Yellow) SVideo - 1, Digital Input - HDMI - 1 (MHL not supported), Audio Input -2 RCA
(White / Red)- 1, USB Interface - USB Type A - 1 (for USB Memory, Document
Camera, Wireless LAN, Firmware Update), USB Type B 1 (for USB Display,
Mouse, K/B, Control, Firmware Update), Network - Wireless - Optional
(ELPAP10)
Connectivity
(Including All taxes) with
Standard Installation &
Required Accessories
3. Projector with 2400 Lumens
Rate Per Unit in Rs.
Detail
Specifications & Details
Technology
RGB liquid crystal shutter projection system
Resolution
XGA
Brightness
2400 Lumens
Contrast Ratio
15,000 : 1
Sound Output
Connectivity
(Including All taxes) with
Standard Installation &
Required Accessories
2W Monaural
Analog- Input D-Sub 15pin - 1 (Blue molding), Composite RCA - 1 (Yellow),
S-Video - 1, Digital Input - HDMI - 1 (MHL not supported), Audio Input -2 RCA
(White / Red)- 1, USB Interface - USB Type A - 1 (for USB Memory, Document
Camera, Wireless LAN, Firmware Update), USB Type B 1 (for USB Display, Mouse,
K/B, Control, Firmware Update), Network - Wireless - Optional (ELPAP10)
MULTIMEDIA PROJECTOR’S WITH REQUIRED OTHER OPTIONAL ACCESSORIES
Sr.
No.
01
Detail
4x6 Non-Motorized Screen
02
6x8 Non-Motorized Screen
Specifications
Auto/Instant lock Spring Action Pull Down mechanism with lock at intervals ,
High Gain Material projector screen, white projector screens, Size: 4’x6’ ( 84
inch Diagonal)
Auto/Instant lock Spring Action Pull Down mechanism with lock at intervals ,
High Gain Material projector screen, white projector screens, Size: 6’ x 8’ ( 120
inch Diagonal)
24
Rate Per Unit in Rs.
(Including All taxes)
03
4x6 Motorized Screen
04
Motorized Wall mount- Imported , High Gain Material projector screen- , white
projector screens Motorized with RF remote , Size: 4x6’(84 inch Diagonal)
06
07
08
09
10
11
12
13
14
Motorized Wall mount- Imported , High Gain Material projector screen- , white
projector screens Motorized with RF remote , Size: 6’ x 8’ ( 120 inch Diagonal)
2.4 GHz Wireless presenter with Laser Pointer, USB connectivity, upto 15 Mtr
Laser Pointer
Control Distance
SVGA Cable
VGA Imported Molded Cable 5/10/15/20 Mtr – Good quality –Shielded
HDMI Cable
HDMI Cable make 10MT – High quality for Projectors
DVI Cable
10 MT Length High Gain Quality
Projector Wall kit
Brand UNIVERSAL CEILING MOUNT BRACKETS FOR MULTIMEDIA PROJECTORS
Kit for Projector Wi-Fi
Wireless LAN Unit
Audio RCA
Single RCA - Video Cable – 10 Mtr ( High Quality) - OFC - For Projectors
VGA Splitter
1 VGA in , 4 Out
HDMI Splitter
4x1 HDMI Splitters with 1 input & 2 Out puts
VGA with Audio Switcher
4 VGA with 4 Audio Input with gain Controlled outputs
15
Converter
6x8 Motorized Screen
05
16
HDMI to VGA (female) Convertor with Audio
Projector Delivery, Installation & Commissioning Charges at SDAU with 12
Months Supports if any
Installation
LIST OF NETWORKING PRODUCTS/INSTRUMENTS/ACESSORIES REQUIRED-OTDR
1.
Details
01
OTDR Machine
Rate Per Unit in Rs.
(Including All taxes)
Technical Specification











Faults detection and diagnosis
Graphic display of test results
Hotkeys: Easy operation, push-and-test Large internal memory: 1000 records
PC software for data analysis, reporting & printing Connectivity: USB & RS232
Bell Core file format (.sor) Backlight 10 hours continuous operation with battery
Dust-damp-shock proof, ideal for field application CE, FCC, FDA certificates Locating
Trace viewing
Events analysis
Batch editing
Flexible printing
Handy, Light Weight, Power Full Design
Dynamic Range
26-37dB
Fiber mode
Single mode fiber, CATV/HFC Network Testing
Emitter Type
LD
Connector
FC/PC (Interchangeable SC, ST)
Distance Measure Accuracy
±(1m + 5×10-5×Distance + sampling space, 1x10 Kmt)
Data Storage
3000 records /256,000
Connectivity
RS-232/USB 2.0 ( RJ45 optional)
Power Supply
NiMH Rechargeable Battery/ AC Adapter
Battery Life
10 hours continuous operation/ 20 hours standby
Operating Temperature
0℃ ~ 50℃
Storage Temperature
-20℃ ~ 70℃
Relative Humidity
0 to 95% (non-condensing)
Calibrated Wave Length
850/1310/1490/1550/1625/1650
Web Length
650nm
Connector Type
Universal push Pull
Standard Package Includes:
Instrument, Rechargeable battery, AC adapter, Trace Manager software CD, Data transfer
cable(RS232/USB), Compact carrying soft bag, Rubber boot, Warranty card, CE certificate, Certificate
of calibration, Quick reference guide.
2.
Cable Locator Device
Details
Transmitter
Rate Per Unit in Rs.
(Including All taxes)
Technical Specification
Output frequencies
Trace mode-577 Hz, 8 kHz, 33 kHz, 200 kHz
Trace mode-577 Hz and 200 kHz pulsed at 8 Hz
Induction mode-33 kHz, 200 kHz
Output voltage (maximum) 70 Vrms
Output power Normal setting: Limited to 0.5 W
High setting: Limited to 3 W or 5W with External DC power
(Option ‘A’ only)-Output protection 240 Vrms
25
Power Batteries: Six alkaline “C” (LR14) cells; External DC: 9-18 V DC (1A)
(Option ‘A’ only)-Typical battery life Normal output level: 50 hours, High output level: 10
hours
Frequencies
Trace and modes Active: 577 Hz, 8 kHz, 33 kHz, 200 kHz
Passive Power: 50/60 Hz, user-selectable: L50/L60-5th harmonic,
H50/H60-9th harmonic, 100/120-rectified power
Auxiliary: ‘T’ model: 31.5 kHz, 512 Hz, 560 Hz
‘P’ model: 31.5 kHz
Depth Range: 0 to 30' (0 to 9 m)
Accuracy: ±10% ± 1 digit for 0 to 60” (0 to 1.5 m)
±15% for 60” to 180” (1.5 to 4.5 m)
±20% for 180” to 360” (4.5 to 9 m)
Power Six alkaline “AA” (LR6) cells
Typical battery life 50 hours
Direct-Connect Transmitter Cable; for direct connection to cable and ground; 5' (1.5 m)
long, Ground Rod; stainless steel
40 ft. (12 m) Long Cigarette Lighter Adapter Cable (Option “A” only)
Receiver
Standard
accessories
Optional
accessories
Physical
Specifications
EMS Marker Locating Accessory, Series Carrying Bag, Rechargeable Auxiliary
Battery for 5-watt units
Environmental
Specifications
Operating temperature -4° to 122°F (-20° to 50°C)
Storage temperature -40° to 158°F (-40° to 70°C)
3.
Size-Transmitter 6.75" H x 11.25" W x 7.75" D (17.2 cm x 28.6 cm x 19.7 cm)
Receiver 25.5" H x 3.75" W x 10.75" D (64.8 cm x 9.5 cm x 27.3 cm)
Weight-Transmitter 5.2 lbs. (2.4 kg)
Receiver 4.1 lbs. (1.8 kg)
Shipping 14.3 lbs. (6.5 kg)
Optical Power Meter
Details
Features
Technical Specification












Specifications
Rate Per Unit in
Rs. (Including All
taxes)
Reference power level storage(Ref Setting)
User self-calibration function
Comfortable LCD display and backlight LCD display supports night operation.
Power measurements in dBm or mw and insertion loss in dB
Optional 10 minutes Auto-off function
With extra-long service life, a common 9V laminated battery which can serve as long as
200hrs continuous operating is engaged.
Low battery power indication
Powered by: Rechargeable built-in Lithium battery or 9V battery (not included) or AC
adapter (included)
Maintenance in Telecom
Maintenance CATV
Test Lab of Optical Fibers
Other Fiber Optic Measurements
Wave-length(nm):
800~1700
Probe:
InGaAs
Detection limit:
1.0mm
Power detecting range(dBm):
-70~+10
Uncertainty degree:
5%
Standard wavelength(nm):
85,013,001,310,149,000,000,000
Display resolution:
0.01dBm
Working temp:
-20~+70°c
Storage temp:
-30~+80°c
Automatic shutdown time(min):
15
Battery serving time(h):
200
Overall dimension(mm):
185×105×50
Power supply:
9V battery
Weight(g):
350
Certification:
CE & RoHS
Warranty Period:
1 year
26
Packaging:
Bag packaging with Instruction card
LIST OF NETWORKING PRODUCTS/INSTRUMENTS/ACESSORIES REQUIRED-SPLICING
4.
Splicing Machine
Details
ACCESSORIES
STANDARD
PACKAGE
OPTIONAL
ITEMS
5.
Technical Specification
All In One Integrated Unit-Stripping, Cleaning, Cleaving, Splicing & Sleeving, Single / SMF
(G.652/657), MMF (G.651), DSF (G.653), NZDSF (G.655),Applicable for 24,12,10,8,6,4,2, Cleave
length-Splice mode /Operational Time-60 Seconds 0.9mm Fiber/ heating mode S- 80-150um,
5mm to 16mm with sheath clamp, 100 splice modes / 30 heating modes, Splice loss- 0.02dB
(SM), 0.01dB (MM), 0.04dB (DSF) and 0.04dB (NZDS), Measured by cut-back method relevant
to ITU-T and IEC standards, Splice time / tube heating time- Typical 7sec with SM / Typical
14sec with FP-03 (60mm) sleeve, Automatic execution of Arc Discharge Power Calibrations,
SC/LCST/FC Connector, Splice result storage- Up to 4000 splices, Viewing methods /
magnification- 2 axis CMOS camera with 4.73” Navigator Touch Screen or above color LCD./X /
Y (320X magnification), or both X and Y simultaneously (200X magnification), Tension test- 1.96
to 2.25N, Applicable protection sleeve- 60mm, 40mm and micro sleeves, Splice Image capture
/Splice data storage: 64 Images / 10,000, No. of splice / heating per battery full charge- Typical
360 cycles with BTR-09, Electrode life- 6000 splices, Dual Heater, Clad to Clad Alignment
System, Size / weight- 146W x 159D x 150H (mm) / 2.7kg (including battery), Operating
condition- Altitude : 0 to 5,000m above sea level, Wind : 15m/sec, Temperature : -10 to 50deg
C, Humidity : 0 to 95%RH, non-dew, Resistance features*1- Shock : 76cm�
�30inch) all surface
drop, Dust : Exposure to dust (0.1 to 500μm dia Alumina Silicate), IP5X, Rain : H=10mm/hr. for
10min, IPX2, Other features- PC software upgrade / data management, Terminals- USB 2.0
(Mini-B type) connector for PC communication, 6-pin Mini-DIN connector for HJS-02 or HJS-03
power supply., External DC Input, Rugged Design against Shock, Dust & Rain, ROHS Compliant,
Firmware Update via Internet, On board user training video
Description- High precision single fiber cleaver, High Primary coat stripper, Nylon Thermal
jacket stripper, Protection sleeve
Fusion splicer AC adapter, AC power cord, Carrying case, Spare electrodes, Instruction manual
CD, Quick reference guide, USB cable, Sleeve loader, Alcohol pot, Screw driver
Fiber holder-CLAMP-S70A (included in standard package), CLAMP-S70B (900um dia. loose
buffer fiber), DCC-12 (for cigar-socket), DCC-13 (with alligator clamp), BTR-09 (Li-ion), DCC-18,
ELCT2-20A, Sheath clamp, DC power cord, Electrodes-FH-60-250 (coating dia. 250μm), FH-60900 (coating dia. 900μm), FH-60-DC250, (coating dia. of 250μm in drop cable), Battery pack
charge cord
FC-6 Cleaver
Details
Specifications
6.
Rate Per Unit in Rs.
(Including All taxes)
Rate Per Unit in
Rs. (Including All
taxes)
Technical Specification
Coating Diameter
0.25mm - 0.9mm (Single)
Cladding Diameter
0.125mm
Cleave Length
9mm - 16mm (Single Fiber - 0.25mm coating)
10mm - 16mm (Single Fiber - 0.9mm coating)
Typical Cleave Angle
0.5 Degrees
Typical Blade Life
36,000 Fiber Cleaves
Number of Steps for Cleave
2
Blade Adjustments
Rotational & Height
Automatic Scrap Collection
Optional
Swift Cleaver
Details
SPECIFICATION
Rate Per Unit in Rs.
(Including All taxes)
Technical Specification
Key Features • Ultra-precision Cleaving
• Cleaving Angle Deviation: less than 0.3°
• Various Cleaving Length: From 80um to 125um
• Approx. 20,000 times cleaving available with Diamond Chip Blade Head
27
• Cleaving more than 20,000 times with a fully charged battery
7.
CT-30 Cleaver
Details
SPECIFICATION
Rate Per Unit in Rs.
(Including All taxes)
Technical Specification
• Applicable up to 12-fiber cleaving
• 48,000 fibers blade life

3 height x 16 positions
• Fiber scrap collection-free
Applicable fibers Silica optical fiber, Bare fiber diameter 125μm
Cleaving angle 0.5 degrees at single fiber
Blade positions 3 height and 16 rotating positions
Blade life 48,000 fibers (1,000 fibers x 3 height x 16 positions)
Dimensions 69W /82D /41H (mm)
Single fiber 0.25mm-12 fib
INVERTER AC 1.5
PERFORMANCE
PARAMETERS
FEATURES
DIMENSIONS,
WEIGHT &
INPUT
POWER SUPPLY
COMPRESSOR
REFRIGERANT
& AMBIENT
OPERATIONS
NOMINAL CAPACITY (Tr)
1.5 TR
(RATED) VOLTAGE / FREQUENCY / PHASE
230 V / 50Hz / SINGLE
COOLING CAPACITY(MIN~ MAX) (WATT)
5300 (800 ~ 6500)
COOLING POWER INPUT (MIN~ MAX) (WATT)
1600 (330 ~ 2200)
EER (W / W) COOLING
3.31
RUNNING CURRENT (COOLING IN Amps)
7.1 ( 1.9 ~ 10.5 )
MOISTURE REMOVAL (LITRES/HOUR)
1.8
AIR FLOW VOLUME (WET CFM) (HIGH / MEDIUM / LOW)
400 / 329 / 270
NOISE LEVEL INDOOR (HIGH/ MEDIUM/ LOW) in db(A)
40 / 37 / 32
MODES
(AUTO/ COOL / FAN / DRY)
TURBO COOLING
YES
SLEEP MODE
YES
TIMER ON / OFF
YES
HORIZONTAL LOUVRE / VERTICAL SWING
MOTORIZED
VERTICAL LOUVRE / HORIZONTAL SWING
MANUAL
AIR FLOW DIRECTION CONTROL
YES
AUTO RESTART WITH MEMORY FUNCTION
YES
FAN MODES
(AUTO/HIGH/MEDIUM/LOW)
I FEEL
YES
BLOW
YES
ANTI FREEZE THERMOSTAT
YES
SELF DIAGNOSIS
YES
LED DISPLAY IN IDU
YES
FILTER CONFIGURATION
CATECHIN / SILVER ION / ANTI BACTERIAL / ANTI - ACARINE /
ACTIVE CARBON / VITAMIN C / DUST FILTER
SPECIAL HEALTH FILER
COLD PLASMA
EVAPORATOR FINS
HYDROPHILIC BLUE FINS
CONDENSOR FINS
ANTI CORROSIVE BLUE FINS
EXPANSION DEVICE IN ODU
CAPILLARY
IDU DIMENSION (W X H X D ) MM
865 X 305 X 215
INPUT POWER SUPPLY
INDOOR UNIT
NET WEIGHT IDU
12 KG
ODU DIMENSION (W X H X D ) MM
899 X 596 X 378
NOISE LEVEL OUTDOOR in db(A)
54
NET WEIGHT ODU
37 KG
COMPRESSOR TYPE
INVERTER ROTARY
COMPRESSOR WARRANTY
5 YEAR
ACOUSTIC JACKET ON COMPRESSOR
YES
REFRIGERANT
R410A
AMBIENT TEMP (COOLING)℃
48ºC
28
Rate Per Unit in Rs.
(Including All taxes)
with Standard
Installation &
Required Accessories
REMOTE
TUBE SIZE &
PIPING
CAPABILITY
REMOTE
NIGHT GLOW FUNCTION ON REMOTE BUTTONS
SUCTION TUBE SIZE OUTER DIAMETER INCH ( mm)
LIQUID TUBE SIZE OUTER DIAMETER INCH ( mm)
MAX PIPING CAPABILITY TOTAL (METRE)
MAX PIPING CAPABILITY VERTICAL (METRE)
REFRIGERANT ADDITIONAL CHARGE BEYOND 4m (g/m)
LCD WITH BACK LIT
NO
1/2'' (12 mm)
1/4'' (6 mm)
25
10
15
INVERTER AC 2.0 TONS
PERFORMANCE
PARAMETERS
FEATURES
NOMINAL CAPACITY (Tr)
2 TR
(RATED) VOLTAGE / FREQUENCY / PHASE
COOLING CAPACITY(MIN~ MAX) (WATT)
COOLING POWER INPUT (MIN~ MAX) (WATT)
EER (W / W) COOLING
RUNNING CURRENT (COOLING IN Amps)
MOISTURE REMOVAL (LITRES/HOUR)
AIR FLOW VOLUME (WET CFM) (HIGH / MEDIUM / LOW)
NOISE LEVEL INDOOR (HIGH/ MEDIUM/ LOW) in db(A)
MODES
TURBO COOLING
SLEEP MODE
TIMER ON / OFF
HORIZONTAL LOUVRE / VERTICAL SWING
VERTICAL LOUVRE / HORIZONTAL SWING
AIR FLOW DIRECTION CONTROL
AUTO RESTART WITH MEMORY FUNCTION
FAN MODES
I FEEL
230 V / 50Hz / SINGLE
6450 (1500 ~ 7000)
1985 (350 ~ 2500)
3.25
9.0( 1.8 ~ 10.1 )
2.0
470 / 382 / 323
42 / 37 / 32
(AUTO/ COOL / FAN / DRY)
YES
YES
YES
MOTORIZED
MANUAL
YES
YES
(AUTO/HIGH/MEDIUM/LOW)
YES
BLOW
ANTI FREEZE THERMOSTAT
SELF DIAGNOSIS
LED DISPLAY IN IDU
FILTER CONFIGURATION
DIMENSIONS,
WEIGHT &
INPUT
POWER SUPPLY
COMPRESSOR
REFRIGERANT
& AMBIENT
OPERATIONS
REMOTE
TUBE SIZE &
PIPING
CAPABILITY
YES
YES
YES
YES
CATECHIN / SILVER ION / ANTI BACTERIAL / ANTI - ACARINE /
ACTIVE CARBON / VITAMIN C / DUST FILTER
SPECIAL HEALTH FILER
COLD PLASMA
EVAPORATOR FINS
HYDROPHILIC BLUE FINS
CONDENSOR FINS
ANTI CORROSIVE BLUE FINS
EXPANSION DEVICE IN ODU
CAPILLARY
IDU DIMENSION (W X H X D ) MM
1008 X 319 X 221
INPUT POWER SUPPLY
INDOOR UNIT
NET WEIGHT IDU
15 KG
ODU DIMENSION (W X H X D ) MM
955 X 700 X 396
NOISE LEVEL OUTDOOR in db(A)
54
NET WEIGHT ODU
51 KG
COMPRESSOR TYPE
INVERTER ROTARY
COMPRESSOR WARRANTY
5 YEAR
ACOUSTIC JACKET ON COMPRESSOR
YES
REFRIGERANT
R410A
AMBIENT TEMP (COOLING)℃
48ºC
REMOTE
NIGHT GLOW FUNCTION ON REMOTE BUTTONS
SUCTION TUBE SIZE OUTER DIAMETER INCH ( mm)
LIQUID TUBE SIZE OUTER DIAMETER INCH ( mm)
MAX PIPING CAPABILITY TOTAL (METRE)
MAX PIPING CAPABILITY VERTICAL (METRE)
REFRIGERANT ADDITIONAL CHARGE BEYOND 4m (g/m)
29
LCD WITH BACK LIT
NO
1/2'' (12 mm)
1/4'' (6 mm)
25
10
15
Rate Per Unit in Rs.
(Including All taxes)
with Standard
Installation &
Required Accessories
NON INVERTER AC 3 STAR WITH 2.0TONES
PERFORMANCE
PARAMETERS
NOMINAL CAPACITY (Tr)
2.0 TR
VOLTAGE / FREQUENCY / PHASE
COOLING CAPACITY (WATT)
POWER INPUT (WATT)
EER (W / W)
STAR RATING - BEE TABLE 2.3
RUNNING CURRENT (Amps)
MOISTURE REMOVAL (LITRES/HOUR)
AIR FLOW VOLUME (WET CFM) (HIGH / MEDIUM / LOW)
NOISE LEVEL INDOOR (HIGH/ MEDIUM/ LOW) in db(A)
FEATURES
DIMENSIONS,
WEIGHT & INPUT
POWER SUPPLY
COMPRESSOR
REFRIGERANT &
AMBIENT
OPERATIONS
REMOTE
TUBE SIZE &
PIPING
CAPABILITY
Rate Per Unit in Rs.
(Including All taxes)
with Standard
Installation &
Required Accessories
230 V / 50Hz / SINGLE
6050
1910
3.17
3 STAR
9.3
2.0
550 / 467 / 412
47 / 44 / 41
MODES
(AUTO/COOL/FAN/DRY), NO HEAT
TURBO COOLING
YES
SLEEP MODE
YES
TIMER ON / OFF
YES
HORIZONTAL LOUVRE / VERTICAL SWING
MOTORIZED
VERTICAL LOUVRE / HORIZONTAL SWING
MANUAL
AIR FLOW DIRECTION CONTROL
YES
AUTO RESTART WITH MEMORY FUNCTION
YES
FAN MODES
(AUTO/HIGH/MEDIUM/LOW)
I FEEL
YES
BLOW
YES
ANTI FREEZE THERMOSTAT
YES
SELF DIAGNOSIS
YES
LED DISPLAY IN IDU
YES
EVAPORATOR FINS
HYDROPHILIC BLUE FINS
CONDENSER FINS
ANTI CORROSIVE BLUE FINS
IDU DIMENSION (W X H X D ) MM
1018 X 315 X 223
INPUT POWER SUPPLY
INDOOR UNIT
NET WEIGHT IDU
15.5 KG
ODU DIMENSION (W X H X D ) MM
968 X 689 X 367
NOISE LEVEL OUTDOOR in db(A)
58
NET WEIGHT ODU
47 KG
COMPRESSOR TYPE
ROTARY
COMPRESSOR WARRANTY
5 YEAR
REFRIGERANT
R 22
MAX AMBIENT TEMP ℃
46ºC
REMOTE
NIGHT GLOW FUNCTION ON REMOTE BUTTONS
LARGE LCD WITH BACK LIT
YES
SUCTION TUBE SIZE OUTER DIAMETER INCH ( mm)
5/8" (15.88mm)
LIQUID TUBE SIZE OUTER DIAMETER INCH ( mm)
MAX PIPING CAPABILITY TOTAL (METRE)
MAX PIPING CAPABILITY VERTICAL (METRE)
REFRIGERANT ADDITIONAL CHARGE BEYOND 3.66 m (g/m)
3/8'' (9.52mm)
12
7
15
NON INVERTER AC 3 STAR WITH 1.5 TONES
PERFORMANCE
PARAMETERS
NOMINAL CAPACITY (Tr)
1.5 TR
VOLTAGE / FREQUENCY / PHASE
230 V / 50Hz / SINGLE
30
Rate Per Unit in Rs.
(Including All taxes)
with Standard
Installation &
Required Accessories
FEATURES
DIMENSIONS,
WEIGHT & INPUT
POWER SUPPLY
COMPRESSOR
REFRIGERANT &
AMBIENT
OPERATIONS
REMOTE
TUBE SIZE &
PIPING
CAPABILITY
COOLING CAPACITY (WATT)
4955
POWER INPUT (WATT)
1595
EER (W / W)
3.11
STAR RATING - BEE TABLE 2.3
3 STAR
RUNNING CURRENT (Amps)
7.1
MOISTURE REMOVAL (LITRES/HOUR)
1.8
AIR FLOW VOLUME (WET CFM) (HIGH / MEDIUM / LOW)
442 / 368 / 312
NOISE LEVEL INDOOR (HIGH/ MEDIUM/ LOW) in db(A)
42 / 38 / 36
MODES
(AUTO/COOL/FAN/DRY), NO HEAT
TURBO COOLING
YES
SLEEP MODE
YES
TIMER ON / OFF
YES
HORIZONTAL LOUVRE / VERTICAL SWING
MOTORIZED
VERTICAL LOUVRE / HORIZONTAL SWING
MANUAL
AIR FLOW DIRECTION CONTROL
YES
AUTO RESTART WITH MEMORY FUNCTION
YES
FAN MODES
(AUTO/HIGH/MEDIUM/LOW)
I FEEL
YES
BLOW
YES
ANTI FREEZE THERMOSTAT
YES
SELF DIAGNOSIS
YES
LED DISPLAY IN IDU
YES
EVAPORATOR FINS
HYDROPHILIC BLUE FINS
CONDENSER FINS
ANTI CORROSIVE BLUE FINS
IDU DIMENSION (W X H X D ) MM
940 X 298 X 200
INPUT POWER SUPPLY
INDOOR UNIT
NET WEIGHT IDU
13 KG
ODU DIMENSION (W X H X D ) MM
913 X 680 X 378
NOISE LEVEL OUTDOOR in db(A)
55
NET WEIGHT ODU
47 KG
COMPRESSOR TYPE
ROTARY
COMPRESSOR WARRANTY
5 YEAR
REFRIGERANT
R 22
MAX AMBIENT TEMP ℃
46ºC
REMOTE
NIGHT GLOW FUNCTION ON REMOTE BUTTONS
LARGE LCD WITH BACK LIT
YES
SUCTION TUBE SIZE OUTER DIAMETER INCH ( mm)
1/2'' (12.7mm)
LIQUID TUBE SIZE OUTER DIAMETER INCH ( mm)
MAX PIPING CAPABILITY TOTAL (METRE)
1/4'' (6.35mm)
12
MAX PIPING CAPABILITY VERTICAL (METRE)
REFRIGERANT ADDITIONAL CHARGE BEYOND 3.66 m (g/m)
7
15
NON INVERTER AC 5 STAR 1.5 TONS
PERFORMANCE
PARAMETERS
FEATURES
NOMINAL CAPACITY ( Tr )
1.5 TR
VOLTAGE / FREQUENCY / PHASE
230 V / 50Hz / SINGLE
COOLING CAPACITY (WATT)
5050
POWER INPUT (WATT)
1440
EER (W / W)
3.51
STAR RATING - BEE TABLE 2.3
5 STAR
RUNNING CURRENT (Amps)
6.3
MOISTURE REMOVAL (LITRES/HOUR)
1.8
AIR FLOW VOLUME (WET CFM) (HIGH /
460 / 384 / 325
MEDIUM / LOW)
NOISE LEVEL INDOOR (HIGH / MED / LOW) in db(A)
46 / 42 / 38
MODES
(AUTO/COOL/FAN/DRY), NO
HEAT
TURBO COOLING
YES
31
Rate Per Unit in Rs.
(Including All taxes) with
Standard Installation &
Required Accessories
DIMENSIONS,
WEIGHT & INPUT
POWER SUPPLY
COMPRESSOR
REFRIGERANT &
AMBIENT
OPERATIONS
REMOTE
TUBE SIZE &
PIPING
CAPABILITY
SLEEP MODE
YES
TIMER ON / OFF
YES
HORIZONTAL LOUVRE / VERTICAL SWING
MOTORIZED
VERTICAL LOUVRE / HORIZONTAL SWING
MANUAL
AIR FLOW DIRECTION CONTROL
YES
AUTO RESTART WITH MEMORY FUNCTION
YES
FAN MODES
(AUTO/HIGH/MEDIUM/LOW)
I FEEL
YES
BLOW
YES
ANTI FREEZE THERMOSTAT
YES
SELF DIAGNOSIS
YES
LED DISPLAY IN IDU
YES
FILTER CONFIGURATION
CATECHIN / SLIVER ION / ANTI BACTERIAL / ANTIACARIEN / ACTIVE CARBON / VITAMIN C / DUST
FILTER
EVAPORATOR FINS
HYDROPHILIC BLUE FINS
CONDENSOR FINS
ANTI CORROSIVE BLUE FINS
IDU DIMENSION (W X H X D ) MM
940 X 298 X 200
INPUT POWER SUPPLY
INDOOR UNIT
NET WEIGHT IDU
14 KG
ODU DIMENSION (W X H X D ) MM
968 X 689 X 367
NOISE LEVEL OUTDOOR in db(A)
56
NET WEIGHT ODU
46 KG
COMPRESSOR TYPE
ROTARY
COMPRESSOR WARRANTY
5 YEAR
REFRIGERANT
R 22
MAX AMBIENT TEMP ℃
46ºC
REMOTE
LARGE LCD WITH BACK LIT
NIGHT GLOW FUNCTION ON REMOTE BUTTONS
YES
SUCTION TUBE SIZE OUTER DIAMETER INCH ( mm)
5/8" (15.88mm)
LIQUID TUBE SIZE OUTER DIAMETER INCH ( mm)
3/8'' (9.52mm)
MAX PIPING CAPABILITY TOTAL (METRE)
20
MAX PIPING CAPABILITY VERTICAL (METRE)
10
REFRIGERANT ADDITIONAL CHARGE BEYOND 3.66m
15
NON INVERTER AC 5 STAR 2.0 TONS
PERFORMANCE
PARAMETERS
FEATURES
NOMINAL CAPACITY ( Tr )
1.5 TR
VOLTAGE / FREQUENCY / PHASE
230 V / 50Hz / SINGLE
COOLING CAPACITY (WATT)
5050
POWER INPUT (WATT)
1440
EER (W / W)
3.51
STAR RATING - BEE TABLE 2.3
5 STAR
RUNNING CURRENT (Amps)
6.3
MOISTURE REMOVAL (LITRES/HOUR)
1.8
AIR FLOW VOLUME (WET CFM) (HIGH / MEDIUM / LOW)
460 / 384 / 325
NOISE LEVEL INDOOR (HIGH / MED / LOW) in db(A)
46 / 42 / 38
MODES
(AUTO/COOL/FAN/DRY), NO
HEAT
TURBO COOLING
YES
SLEEP MODE
YES
TIMER ON / OFF
YES
HORIZONTAL LOUVRE / VERTICAL SWING
MOTORIZED
VERTICAL LOUVRE / HORIZONTAL SWING
MANUAL
AIR FLOW DIRECTION CONTROL
YES
AUTO RESTART WITH MEMORY FUNCTION
YES
FAN MODES
(AUTO/HIGH/MEDIUM/LOW)
I FEEL
YES
BLOW
YES
32
Rate Per Unit in Rs.
(Including All taxes) with
Standard Installation &
Required Accessories
DIMENSIONS,
WEIGHT & INPUT
POWER SUPPLY
COMPRESSOR
REFRIGERANT &
AMBIENT
OPERATIONS
REMOTE
TUBE SIZE &
PIPING
CAPABILITY
ANTI FREEZE THERMOSTAT
YES
SELF DIAGNOSIS
YES
LED DISPLAY IN IDU
YES
FILTER
CATECHIN / SLIVER ION / ANTI BACTERIAL / ANTI-ACARIEN
CONFIGURATION
/ ACTIVE CARBON / VITAMIN C / DUST FILTER
EVAPORATOR FINS
HYDROPHILIC BLUE FINS
CONDENSOR FINS
ANTI CORROSIVE BLUE FINS
IDU DIMENSION (W X H X D ) MM
940 X 298 X 200
INPUT POWER SUPPLY
INDOOR UNIT
NET WEIGHT IDU
14 KG
ODU DIMENSION (W X H X D ) MM
968 X 689 X 367
NOISE LEVEL OUTDOOR in db(A)
56
NET WEIGHT ODU
46 KG
COMPRESSOR TYPE
ROTARY
COMPRESSOR WARRANTY
5 YEAR
REFRIGERANT
R 22
MAX AMBIENT TEMP ℃
46ºC
REMOTE
LARGE LCD WITH BACK LIT
NIGHT GLOW FUNCTION ON REMOTE BUTTONS
YES
SUCTION TUBE SIZE OUTER DIAMETER INCH ( mm)
5/8" (15.88mm)
LIQUID TUBE SIZE OUTER DIAMETER INCH ( mm)
3/8'' (9.52mm)
MAX PIPING CAPABILITY TOTAL (METRE)
20
MAX PIPING CAPABILITY VERTICAL (METRE)
REFRIGERANT ADDITIONAL CHARGE BEYOND 3.66m
10
15
CASSETTE AIRCONDITIONING SYSTEMS
33
Rate Per Unit in Rs. (Including All taxes
without Installation Charge)
DIGITAL VIDEO CAMERA (CANON/SONY/PANASONIC)
Name
Specifications
Rate Per Unit in Rs.
(Including All taxes)
with Standard
Installation &
Required Accessories
1. Digital Video Camera
2.0Additional Battery

2.07MP HD CMOS

10X High definition Advance optical Zoom

3.5” LCD with Touch Screen

64GB Inbuilt Memory SSD

HD to SD Card Slot

Intelligent IS

Double Digital 2

Microphone Input

Infrared Mode

Dual SD Card Conversion

Compact & light weight.

Rechargeable battery up to 1 Hr. 30 Min Continuous Recording

2 Years Warranty

All accessories including carry Case, cable, Software Cd Etcs.
Rechargeable battery Supported up to 2Hr 30 Min Continuous Recording
3.0Tripod
Vangaurd Triopd-CX-203AP
4.0
Battery Charge
Stand Bye Optional Battery Charge(Independent Charging Unit) as per Required Rating
5.0 LED Light
LED Light with Battery & Charger units
64 GB SDXC Memory Card
6.0 SDCARD
Specifications for Digital Camera (CANON/SONY/PANASONIC)
Digital Camera Item No-1
Imaging Processor
Rate Per Unit in Rs.
(Including All taxes) with
Standard Installation &
Required Accessories
DIGIC 4+
Camera Effective Pixels
Approx. 20.0 megapixels (aspect ratio: 4:3)
Sensor Size
1/2.3 type
Focal Length
40x zoom:
Focusing Range
0cm (0 in.) - infinity (W), 1.4m (4.6ft.) - infinity (T)
Macro:
Image Stabilizer (IS) System
4.3 (W) - 172.0 (T) mm, 35mm film equivalent: 24 (W) - 960 (T) mm)
0 - 50cm (W) (0in. - 1.6ft. (W))
Lens-shift type
Type
3.0-inch type, 4:3, Approx. 230,000 dots, Autofocus: Continuous, Servo AF, Face AiAF, Center,
Tracking AF
Metering System
Evaluative, Center-weighted average, Spot
ISO Speed (Standard Output Sensitivity, Recommended Exposure Index)
Shutter Speed
1 - 1/4000sec., 15 - 1sec. (in Long Shutter mode)
Aperture
Iris diaphragm, /3.5 - f/8.0 (W), f/6.3 - f/8.0 (T)
Flash
AUTO, ISO 100 – ISO 800
1 stop increments
Auto, On, Slow Synchro, Off, 50cm – 5.0m (W), 1.4m - 2.7m (T) (1.6 – 16ft. (W), 4.6 – 8.9ft. (T))
Shooting
Specifications
AUTO, P, Live View Control, Portrait, Face Self-timer, Low Light, Fish-eye Effect, Miniature
Effect, Toy Camera Effect, Monochrome, Super Vivid, Poster Effect, Snow, Fireworks, Long
Shutter , Shooting movies is possible with the movie button, Continuous shooting (AUTO, P
Mode- Approx. 0.5 shots/sec
34
Recording
Specifications
Still Images: (4:3)
4:3 , Large: 5152 x 3864, Medium 1: 3648 x 2736
Medium 2: 2048 x 1536, Small: 640 x 480
Aspect Ratio:
16:9 / 3:2 / 4:3 / 1:1
Movies:
Miniature Effect: 1280 x 720 / 640 x 480
Other than the above: 1280 x 720 / 640 x 480
Power Supply
Battery Pack NB-11LH
Number of Shots
(CIPA compliant)-Approx. 185 images, (Eco Mode)- Approx. 245 images
Movie Recoding Time (Actual Usage Time)
Approx. 45 mins.
Dimensions (CIPA compliant)
104.4 x 69.1 x 85.1mm (4.11 x 2.72 x 3.35in.)
Weight (CIPA
compliant)
Approx. 325g (11.5oz.) (including battery & memory card)
Approx. 308g (10.9oz.) (camera body only)
Other Features
Auto Button
Other Accessories
Carry Bag for Camera can hold Camera including all required Accessories
Digital Camera Item No-2
Imaging Processor
Rate Per Unit in Rs.
(Including All taxes) with
Standard Installation &
Required Accessories
DIGIC 6
Approx. 16.0 megapixels (aspect ratio: 4:3)
Camera Effective Pixels
Sensor Size
1/2.3 type
Focal Length
65x zoom:
Focusing Range
0cm (0 in.) - infinity (W), 1.4m (4.6ft.) - infinity (T)
4.3 (W) - 172.0 (T) mm, 35mm film equivalent: 24 (W) - 960 (T) mm)
Macro:
0 - 50cm (W) (0in. - 1.6ft. (W))
Image Stabilizer (IS) System
Lens-shift type
Connectives
WI-FI & NFC
Type
3.0-inch type, 4:3, Approx. 230,000 dots, Autofocus: Continuous, Servo AF, Face AiAF, Center,
Tracking AF
Metering System
Evaluative, Center-weighted average, Spot
ISO Speed (Standard Output Sensitivity, Recommended Exposure Index)
Shutter Speed
1 - 1/4000sec., 15 - 1sec. (in Long Shutter mode)
Aperture
Iris diaphragm, /3.5 - f/8.0 (W), f/6.3 - f/8.0 (T)
Flash
AUTO, ISO 100 – ISO 800
1 stop increments
Auto, On, Slow Synchro, Off, 50cm – 5.0m (W), 1.4m - 2.7m (T) (1.6 – 16ft. (W), 4.6 – 8.9ft. (T))
Shooting
Specifications
AUTO, P, Live View Control, Portrait, Face Self-timer, Low Light, Fish-eye Effect, Miniature
Effect, Toy Camera Effect, Monochrome, Super Vivid, Poster Effect, Snow, Fireworks, Long
Shutter , Shooting movies is possible with the movie button, Continuous shooting (AUTO, P
Mode- Approx. 0.5 shots/sec
Recording
Specifications
Still Images: (4:3)
4:3 , Large: 5152 x 3864, Medium 1: 3648 x 2736
Medium 2: 2048 x 1536, Small: 640 x 480
Aspect Ratio:
16:9 / 3:2 / 4:3 / 1:1
Video
Full HD Videos
Movies:
Miniature Effect: 1280 x 720 / 640 x 480
Other than the above: 1280 x 720 / 640 x 480
Power Supply
Battery Pack NB-11LH
Number of Shots
(CIPA compliant)-Approx. 185 images, (Eco Mode)- Approx. 245 images
Movie Recoding Time (Actual Usage Time)
Approx. 45 mins.
Dimensions (CIPA compliant)
104.4 x 69.1 x 85.1mm (4.11 x 2.72 x 3.35in.)
Weight (CIPA
compliant)
Approx. 325g (11.5oz.) (including battery & memory card)
Approx. 308g (10.9oz.) (camera body only)
Other Features
Auto Button
Other Accessories
Carry Bag for Camera can hold Camera including all required Accessories
35
Digital Camera Item No-2
Imaging Processor
Rate Per Unit in Rs.
(Including All taxes) with
Standard Installation &
Required Accessories
DIGIC 4+
Approx. 16.0 megapixels (aspect ratio: 4:3)
Camera Effective Pixels
Sensor Size
1/2.3 type
Focal Length
50x zoom:
Focusing Range
0cm (0 in.) - infinity (W), 1.4m (4.6ft.) - infinity (T)
4.3 (W) - 172.0 (T) mm, 35mm film equivalent: 24 (W) - 960 (T) mm)
Macro:
0 - 50cm (W) (0in. - 1.6ft. (W))
Image Stabilizer (IS) System
Lens-shift type
Connectives
WI-FI & NFC
Type
3.0-inch type, 4:3, Approx. 230,000 dots, Autofocus: Continuous, Servo AF, Face AiAF, Center,
Tracking AF
Metering System
Evaluative, Center-weighted average, Spot
ISO Speed (Standard Output Sensitivity, Recommended Exposure Index)
Shutter Speed
1 - 1/4000sec., 15 - 1sec. (in Long Shutter mode)
Aperture
Iris diaphragm, /3.5 - f/8.0 (W), f/6.3 - f/8.0 (T)
Flash
AUTO, ISO 100 – ISO 800
1 stop increments
Auto, On, Slow Synchro, Off, 50cm – 5.0m (W), 1.4m - 2.7m (T) (1.6 – 16ft. (W), 4.6 – 8.9ft. (T))
Shooting
Specifications
AUTO, P, Live View Control, Portrait, Face Self-timer, Low Light, Fish-eye Effect, Miniature
Effect, Toy Camera Effect, Monochrome, Super Vivid, Poster Effect, Snow, Fireworks, Long
Shutter , Shooting movies is possible with the movie button, Continuous shooting (AUTO, P
Mode- Approx. 0.5 shots/sec
Recording
Specifications
Still Images: (4:3)
4:3 , Large: 5152 x 3864, Medium 1: 3648 x 2736
Medium 2: 2048 x 1536, Small: 640 x 480
Aspect Ratio:
16:9 / 3:2 / 4:3 / 1:1
Video
Full HD Videos
Movies:
Miniature Effect: 1280 x 720 / 640 x 480
Other than the above: 1280 x 720 / 640 x 480
Power Supply
Battery Pack NB-11LH
Number of Shots
(CIPA compliant)-Approx. 185 images, (Eco Mode)- Approx. 245 images
Movie Recoding Time (Actual Usage Time)
Approx. 45 mins.
Dimensions (CIPA compliant)
104.4 x 69.1 x 85.1mm (4.11 x 2.72 x 3.35in.)
Weight (CIPA
compliant)
Approx. 325g (11.5oz.) (including battery & memory card)
Approx. 308g (10.9oz.) (camera body only)
Other Features
Auto Button
Other Accessories
Carry Bag for Camera can hold Camera including all required Accessories
DSLR Camera Item No-3
Type
Digital, single-lens reflex, AF/AE camera with built-in flash
Recording media
SD memory card, SDHC memory card, SDXC memory card,*Compatible with UHS-I
Image sensor size
Approx. 22.3 x 14.9mm
Compatible lenses
EF lenses (including EF-S lenses), * Excluding EF-M lenses, EF mount
(35mm-equivalent focal length is approx. 1.6 times the lens focal length)
Image Sensor
Type
CMOS sensor
Effective pixels
Approx. 18.00 megapixels
Aspect ratio
3:2
Dust delete feature Auto, Manual, Dust Delete Data appending
Recording System
Recording format
Design rule for Camera File System (DCF) 2.0
36
Image type
JPEG, RAW (14-bioriginal), RAW+JPEG Large simultaneous recording possible
Recording pixels
L (Large):
Approx. 17.90 megapixels (5184 x 3456)
M (Medium):
Approx. 8.00 megapixels (3456 x 2304)
S1 (Small 1):
Approx. 4.50 megapixels (2592 x 1728)
S2 (Small 2):
Approx. 2.50 megapixels (1920 x 1280)
S3 (Small 3):
Approx. 350,000 pixels (720 x 480)
RAW:
Approx. 17.90 megapixels (5184 x 3456)
Image Processing During Shooting
Picture style
Auto, Standard, Portrait, Landscape, Neutral, Faithful, Monochrome User Def. 1 - 3
Basic+
Ambience-based shots, Light / scene-based shots
Noise reduction
Applicable to long exposures and high ISO speed shots
Auto image brightness correction
Lens peripheral illumination
correction
Auto Lighting Optimizer
Peripheral illumination correction, Chromatic aberration correction
Viewfinder
Type
Eye-level pent mirror
Coverage
Vertical / Horizontal approx. 95% (with Eye point approx. 19mm)
Magnification
Approx. 0.85x (-1m-¹ with 50mm lens at infinity)
Eyepoint
Approx. 19mm (from eyepiece lens center at -1m-¹)
Built-in dioptric adjustment
Focusing screen
Approx. -3.0 - +1.0m-¹ (dpt)
Fixed, Precision Matte
Autofocus
Type
TTL secondary image-registration, phase detection
AF points
Nine cross-type AF points (Cross-type AF sensitive to f/2.8 with center AF point)
Focusing brightness range
EV -0.5 - 18 (center AF point, at 23°C / 73°F, ISO 100)
AF operation
One-Shot AF, AI Servo AF, AI Focus AF
AF-assist beam
Small series of flashes fired by built-in flash
ISO speed
(Recommended
exposure index)
Basic Zone
modes*:
ISO 100 - ISO 6400 set automatically, *Portrait: ISO 100,
Handheld Night Scene: ISO 100 - ISO 12800 set automatically
Creative zone
modes:
ISO 100 - ISO 12800 set manually (whole-stop increments), ISO 100 - ISO
6400 set automatically, maximum ISO speed settable for ISO Auto, or ISO
expansion to "H" (equivalent to ISO 25600)
Shutter
Type / Shutter
speeds
Electronically-controlled, focal-plane shutter,1/4000sec. to 30secs. (Total shutter speed
range. Available range varies by shooting mode.), Bulb, X-sync at 1/200sec.
Flash
Built-in flash
Retractable, auto pop-up flash
Guide No.:
Approx. 13/43 (ISO 100, in meters/feet)
Flash coverage:
Approx. 17mm lens angle of view
Recycling time approx. 3secs.
Wireless master function provided
External flash
EX-series Speed lite (Flash functions settable with the camera)
Flash metering
E-TTL II auto flash
Flash exposure compensation
FE lock
±2 stops in 1/3- or 1/2-stop increments
Provided
Continuous shooting speed Max. approx. 5.0 shots/sec.
Live View Shootings
Aspect ratio settings:- 3:2, 4:3, 16:9, 1:1
Focusing
Hybrid CMOS AF System* (Face Tracking, FlexiZone-Multi, FlexiZone-Single), Phasedifference detection (Quick mode) , Manual focusing (approx. 5x / 10x magnification
possible), * Focusing brightness range: EV 1 - 18 (at 23°C / 73°F, ISO 100)
Touch shutter
Provided
37
Metering
brightness range
EV 0 - 20 (at 23°C / 73°F with EF50mm f/1.4 USM lens, ISO 100)
Grid display
Two types
Recording format
MOV
Movie
MPEG-4 AVC / H.264 Variable (average) bit rate
Recording size and
frame rate
1920 x 1080 (Full HD):
30p / 25p / 24p
1280 x 720 (HD):
60p / 50p
640 x 480 (SD):
30p / 25p
* 30p: 29.97 fps, 25p: 25.00 fps, 24p: 23.98 fps, 60p: 59.94 fps, 50p: 50.00 fps
File size
1920 x 1080 (30p / 25p / 24p):
Approx. 330 MB/min.
1280 x 720 (60p / 50p):
Approx. 330 MB/min.
640 x 480 (30p / 25p):
Approx. 82.5 MB/min.
ISO speed
(Recommended
exposure index)
Auto ISO range
ISO 100 - ISO 6400 set
LCD Monitor
TFT color liquid-crystal monitor/ Wide, 7.7cm (3.0-in.) (3:2) with approx. 1.04 million dots,
Capacitive Touch sensing
Image rotate
Possible
Movie playback
Enabled (LCD monitor, video / audio OUT, HDMI OUT), Built-in speaker
Slide show
All images, by date, by folder, by movies, by stills, by rating
Five transition effects selectable
Background music
Selectable for slide shows and movie playback
Manual ISO range
ISO 100 - ISO 6400 set automatically / manually, expandable to H
(equivalent to ISO 12800)
Post-Processing of Images
Creative filters
Grainy B/W, Soft focus, Fish-eye effect, Art bold effect, Water painting effect, Toy camera
effect, Miniature effect
Resize
Possible
Direct Printing
Compatible printers
PictBridge-compatible printers
Interface
Audio / video OUT
/ Digital terminal
Analog video (compatible with NTSC / PAL) / stereo audio output
Personal computer communication and direct printing (Hi-Speed USB equivalent), GPS
Receiver GP-E2 connection
HDMI mini OUT terminal
Type C (auto switching of resolution), CEC-compatible
Remote control terminal
For Remote Switch RS-60E3
Wireless remote control
Remote Controller RC-6
Eye-Fi card
Compatible
Power
Battery
Battery Pack LP-E8 (Qty 1), * AC Power can be supplied via Adapter Kit ACK-E8
* With Battery Grip BG-E8 attached, size-AA / LR6 batteries
Battery Life
(Based on CIPA
testing standards)
With viewfinder shooting: Approx. 440 shots at 23°C / 73°F /Approx. 400 shots at 0°C / 32°F
With Live View shooting: Approx. 180 shots at 23°C / 73°F /Approx. 150 shots at 0°C / 32°F
Movie shooting: Approx. 1hr. 40mins. at 23°C / 73°F /Approx. 1 hr. 20 min. at 0°C / 32°F
(with a fully-charged Battery Pack LP-E8)
Dimensions and Weight
Dimensions (W x H x D)
Approx. 133.1 x 99.8 x 78.8mm / 5.2 x 3.9 x 3.1in.
Weight
Approx. 580g / 20.5oz. (CIPA Guidelines)/ 525g / 18.5oz. (Body only)
Accessories
Bag can suitable to carry Camera with all accessories
Xerox & Copier Machines (Type No: 1-10)
Copier Machine Type-1
Rate Per Unit in Rs.
(Including All taxes)
38
with Standard
Installation &
Required Accessories
Technical Parameters
Minimum Copying
Original Size
Image Size
RAM
Technology
Resolution
Zoom
Zoom ratio increment
Category
20 cpm
A3
A3
128 MB
Twin Beam Laser
600 x 600 dpi
25 to 400 %
1%
Simplex
No Ethernet
220-240 V, 2.7 A
Power Requirement
2R, 2E
Preset enlargement and reduction steps
250 sheets
Paper Capacity
80-sheet
By pass
1 to 99 (0 to 9 keypad)
Multiple copying
Mono-Component Toner with Toner Projection Development (No Developer
Required)
Win 2000, XP, Server 2003, Vista, Server 2008, 7, Server 2012, 8, 8.1, Mac OS X
10.5.8+
On-Demand fixing, uses highly efficient Ceramic heater and fixing film
Toner
Operating system supported
Fixing method
13 Secs
Warm up time
2.3 Watt
Sleep mode
Energy Consumption in ready Mode
Typical Energy Consumption (TEC) Value
File Format supported
BMP, JPEG, PDF, compact PDF, searchable PDF, TIFF
Other
Features
14.2 W
1.18 KWh
Non Magnetic Mono Component Toner with Toner Projection Development (TPD) for better
greyscale and text reproduction, Excess toner is pulled back into the cartridge giving better yield,
exterior parts use 100% Recycled Plastic material in the actual device. Recycled plastic has the effect
of reducing carbon dioxide emission by 94% compared with new plastic.
Additional Consumable Items
Other Accessories
Genuine Toner For Said Model/Machine
Trolley For Said Model/Machine
Rate Per Unit in Rs.
(Including All taxes)
with Standard
Installation & Required
Accessories
Copier Machine Type-2
Technical Parameters
Type
B / W Laser Multifunctional (Reader / Printer Console)
Maximum Original Size
A3
Fixing System
On-demand Fusing
Copy Speed
A4
20ppm
A3
10ppm
First Copy Time
7.9secs
Warm-Up Time
From Power On
From
Sleep
Mode
Print Description Language
OS compatibility
Resolution
13secs
2.9secs
(The time it takes from recovery sleep to the start key is enabled)
UFRII Lite
Windows 8.1 / 8 / 7 / Vista / XP / 2000, Windows Server 2012 / Server 2008 /
Server 2003, Mac OS X 10.5.8 or later
Scan
300 x 300dpi
Copy
600 x 600dpi
39
Print
600 x 600dpi
Pull Scan (MF Toolbox / Scan Gear)
B / W & Color
Push Scan ( MF Toolbox)
B / W & Color
TWAIN, WIA compatible
Scan Features
Supported File Format Scan
PDF / Searchable PDF / Compact PDF, BMP, JPEG, TIFF
Processor speed
400MHZ
Memory Capacity
128MB
Paper Handling
Paper Sizes
Cassette 1
A3, B4, A4R, A4, B5R, B5, A5R
Cassette 2 (Optional)
A3, B4, A4R, A4, B5R, B5, A5R
Bypass Tray
A3, B4, A4R, A4, B5R, B5, A5R, Envelope (COM 10,
Monarch, ISO-C5, DL)
Sheet, Book, and Three dimensional objects (up to 2kg)
Acceptable Originals
Available
Paper
Drawer
Weight:
64 to 90gsm
Bypass
Tray
Paper Capacity
Type:
Plain, Recycled, Color (64 to 80gsm), Bond (75 to 90gsm)
Weight:
64 to 128gsm
Type:
Plain, Recycled, Color (64 to 80gsm), Bond (75 to 90gsm), Heavy Paper 1 (91 to
105gsm), Heavy Paper 2 (106 to 128gsm), Transparencies, Labels, Envelopes
Cassette 1
250 sheets (80gsm)
Cassette 2 (Optional)
250 sheets (80gsm)
Bypass Tray
80 sheets (80gsm)
Connectivity
Interface
Network
Ethernet 100BASE-TX / 10BASE-T
Others
Network Protocol
USB 1.1 / 2.0
TCP/IP v4/v6
General Specifications
Power Consumption
Sleep
2.0W or less
Maximum
1.5kW or less
Power Supply
220 - 240V AC, 50 / 60Hz
Toner Yield
Approx. 10,200 sheets (A4, 6% coverage)
Drum Yield
Approx. 61,700 sheets
Department ID Management
Up to 100 departments
Additional Consumable Items
Other Accessories
Genuine Toner For Said Model/Machine
Trolley For Said Model/Machine
Rate Per Unit in Rs.
Copier Machine Type-3
Technical Parameters
Type
Maximum Original Size
Fixing System
Copy Speed
First Copy Time
Warm-Up Time
B / W Laser Multifunctional (Reader / Printer Console)
A3
On-demand Fusing
A4
20ppm
A3
10ppm
7.9secs
From Power On
13secs
From Sleep Mode
2.9secs
40
(Including All taxes)
with Standard
Installation & Required
Accessories
(The time it takes from recovery sleep to the start key
is enabled)
Print Description Language
UFRII Lite
Windows 8.1 / 8 / 7 / Vista / XP / 2000, Windows Server 2012 / Server 2008 /
OS compatibility
Resolution
Server 2003, Mac OS X 10.5.8 or later
Scan
300 x 300dpi
Copy
600 x 600dpi
Print
600 x 600dpi
Pull Scan (MF Toolbox / Scan Gear)
B / W & Color
B / W & Color
Push Scan ( MF Toolbox)
TWAIN, WIA compatible
Scan Features
PDF / Searchable PDF / Compact PDF, BMP, JPEG, TIFF
Supported File Format (Scan)
400MHZ
Processor speed
Yes
Duplex
128MB
Memory Capacity
Paper handling
Cassette 1
A3, B4, A4R, A4, B5R, B5, A5R
Paper Sizes
Cassette 2 (Optional)
Bypass Tray
Acceptable Originals
Available Paper
A3, B4, A4R, A4, B5R, B5, A5R
A3, B4, A4R, A4, B5R, B5, A5R, Envelope (COM 10,
Monarch, ISO-C5, DL)
Sheet, Book, and Three dimensional objects (up to 2kg)
Drawer
Weight:
64 to 90gsm
Type:
Plain, Recycled, Color (64 to 80gsm), Bond (75 to 90gsm)
Bypass
Tray
Weight:
64 to 128gsm
Type:
Paper Capacity
Plain, Recycled, Color (64 to 80gsm), Bond (75 to 90gsm), Heavy
Paper 1 (91 to 105gsm), Heavy Paper 2 (106 to 128gsm),
Transparencies, Labels, Envelopes
Cassette 1
250 sheets (80gsm)
Cassette 2 (Optional)
250 sheets (80gsm)
Bypass Tray
80 sheets (80gsm)
Connectivity
Interface
Network Protocol
Network
Ethernet 100BASE-TX / 10BASE-T
Others
USB 1.1 / 2.0
TCP/IP v4/v6
General Specifications
Power Consumption
Sleep
2.0W or less
Maximum
1.5kW or less
Power Supply
220 - 240V AC, 50 / 60Hz
Toner Yield
Drum Yield
Approx. 10,200 sheets (A4, 6% coverage)
Approx. 61,700 sheets
Department ID Management
Up to 100 departments
Additional Consumable Items
Other Accessories
Genuine Toner For Said Model/Machine
Trolley For Said Model/Machine
Rate Per Unit in
Rs. (Including All
Copier Machine Type-4
41
taxes) with
Standard
Installation &
Required
Accessories
Technical Parameters
Minimum copying
Original Size
20 cpm
A3
Image Size
A3
RAM
Technology
Resolution
128 MB
Zoom
25 to 400 %
Zoom ratio increment
1%
Duplex
Twin Beam Laser
600 x 600 dpi
Category
DADF
Network
Standard
Power Requirement
220-240 V, 2.7 A
Standard Ethernet
2R, 2E
Preset Enlargement And Reduction Steps
250 sheets
Paper Capacity
By pass
Multiple copying
Toner
80-sheet
Operating system supported
Win 2000, XP, Server 2003, Vista, Server 2008, 7, Server 2012, 8, 8.1, Mac OS X
10.5.8+
1 to 99 (0 to 9 keypad)
Mono-Component Toner with Toner Projection Development
Required)
(No Developer
On-Demand fixing, uses highly efficient Ceramic heater and fixing film
13 Secs
Fixing method
Warm up time
2.3 Watt
Sleep mode
Energy Consumption in ready Mode
14.2 W
Typical Energy Consumption (TEC) Value
1.18 KWh
Color remote scanning with MF tool box
Color remote scanning
BMP, JPEG, PDF, compact PDF, searchable PDF, TIFF
File Format supported
Non
Magnetic
Mono
Component Toner with Toner Projection Development (TPD) for better
Other
greyscale
and
text
reproduction,
Excess toner is pulled back into the cartridge giving better yield,
Features
exterior parts use 100% Recycled Plastic material in the actual device. Recycled plastic has the effect
of reducing carbon dioxide emission by 94% compared with new plastic.
Additional Consumable Items
Other Accessories
Genuine Toner For Said Model/Machine
Trolley For Said Model/Machine
Rate Per Unit in Rs.
Copier Machine Type-5
Technical Parameters
Type
Imaging System
Desktop (Reader Combined + Inner Output)
Memory
Standard:
256MB
Maximum:
512MB
Laser Dry Electrostatic Transfer System
Ethernet (100Base-TX / 10Base-T), USB 2.0
Network Interface
30 seconds maximum after powering ON
Warm Up Time
1 second maximum from the Sleep mode
First Copy Output Time
Multiple Copies
Magnification
5.4 seconds or less
1 to 999 sheets
25% to 400% (1% increment)
Maximum Original Size
Max. A3 / 11" x 17"
42
(Including All taxes)
with Standard
Installation & Required
Accessories
Duplex
Standard
25ppm
Copy / Print Speed
Resolution
Reading:
600 x 600dpi
Writing:
Paper Cassette:
1200 x 1200dpi
Standard: 100 sheets paper capacity
Acceptable
Paper Weights
Stack Bypass:
Paper Cassette:
Stack Bypass:
Power Source
220 - 240V AC, 50 / 60Hz
Paper Sources
(80gsm)
Standard: 250 + 550 sheets paper capacity
Maximum: 250 + 3 x 550 sheets paper capacity
64 to 90gsm
64 to 128gsm
Maximum Power Consumption
Toner Yield (6% Coverage)
Drum Yield
Approx. 1.542KW
Approx. 14,600 sheets (A4)
Approx. 132,000 sheets (A4)
Print Specification
Standard:
PDL
UFR II LT
Network OS
Windows 2000 / XP / Server2003 / Vista / Server2008 / Win7, Mac OSX (10.4.9 or later)
Network Scan Gear Specification
Windows 2000 / XP / Server2003 / Vista / Server2008 / Win7
Supported OS
Resolution
Other Points
Category
BW:
Up to 600 x 600dpi
CL:
Up to 300 x 300dpi
Duplex
Toner
Mono-Component Toner with Toner Projection Development
(No Developer Required)
Unenhanced Printing Resolution
1200 x 1200 dpi
Fixing method
On-Demand fixing, uses highly efficient Ceramic heater and
fixing film
Printing Language
UFR II LT
Other Advantages/ Additional functions
Monochrome
Easily access functions from user friendly touch panel
Touch Panel
Store frequently used copying functions as Mode Memory buttons
Continuous Run
Replace toner while MFD is printing or copying without stopping the machine
Standard USB memory media connectivity
Print TIFF & JPEG files stored on USB pen drive
Environmental Advantage
Exterior parts use 100% Recycled Plastic material in the actual device. Recycled plastic has the effect of reducing
carbon dioxide emission by 94% compared with new plastic.
Additional Consumable Items
Other Accessories
Genuine Toner For Said Model/Machine
Trolley For Said Model/Machine
Rate Per Unit in Rs.
(Including All taxes)
with Standard
Installation &
Required Accessories
Copier Machine Type-6
Technical Parameters
Minimum Copying
30 cpm
Original Size
A3
Image Size
A3
256-MB RAM/512-MB RAM
RAM
Technology
Resolution
Zoom
Twin Beam Laser
1200 X1200dpi
25 to 400 %
Zoom ratio increment
Duplex
Category
1%
43
220-240 V, 4.2 A
Power Requirement
3R, 3E
preset enlargement and reduction steps
250/550
sheets
Paper Capacity
100-sheet
By pass
1 to 999 (0 to 9 keypad)
Multiple copying
Toner Mono-Component Toner with Toner Projection Development (No Developer Required)
Unenhanced Printing Resolution
1200 x 1200 dpi
Fixing method
On-Demand fixing, uses highly efficient Ceramic heater and fixing film
Printing Language
Energy Used in Ready Mode
UFR II LT
43W
Typical Energy Consumption (TEC) Value
1.3KWh
Additional functions
Monochrome
Easily access functions from user friendly touch panel
Touch Panel
Store frequently used copying functions as Mode Memory buttons
Continuous Run
Replace toner while MFD is printing or copying without stopping the machine
Standard USB memory media connectivity
Print TIFF & JPEG files stored on USB pen drive
Environmental
Certain exterior parts use 100% Recycled Plastic material in the actual device. Recycled plastic
advantage
has the effect of reducing carbon dioxide emission by 94% compared with new plastic.
Additional Consumable Items
Genuine Toner For Said Model/Machine
Other Accessories
Trolley For Said Model/Machine
Rate Per Unit in Rs.
(Including All taxes)
with Standard
Installation &
Required Accessories
Copier Machine Type-7
Technical Parameters
Minimum copying
Original Size
Image Size
RAM
HDD
Technology
Resolution
Zoom
25 cpm
A3
A3
1.25-GB /1.75-GB
160 GB/ 1 TB
4 Beam Laser
600 x 600 dpi
25 to 400 (1%)
Zoom ratio increment
Category
1%
Standard
Std. Gigabit Ethernet
Power Requirement
220-240 V, 5.6 A
Paper Capacity
550/550 sheets
By pass
80-sheet
Multiple copying
1 to 999 (0 to 9 keypad)
Scanning Speed
51 opm color & BW
HDD Erase Kit
Toner
Std., up to 9 overwrites
Mono-Component Toner with Toner Projection Development (No Developer Required)
Unenhanced Printing Resolution
1200 x 1200 dpi
5.2 sec
First Print out time
Dual custom processors/1.8 GHz
Processor
On-Demand fixing, uses highly efficient Ceramic heater and fixing film
Fixing method
0.9W
Energy Used in Power Save Mode
62.5W
Energy Used in Ready Mode
1.2KWh
Typical Energy Consumption (TEC) Value
Additional shared storage available on the HDD
Advance Box
Users can store all types of Files - TIFF, JPEG, PDF, Word, Excel, PowerPoint, MP3
Customizable
Customized wall paper can be used
44
Operation Panel
Continuous Run
Standard USB
Memory Media
Connectivity
Only function buttons that are required can be displayed
Replace toner while MFD is printing or copying without stopping the machine
Preview TIFF & JPEG files stored on USB pen drive
Print TIFF & JPEG files stored on USB pen drive
Scan TIFF, JPEG, PDF & PDF Compact files directly to USB pen drive
An innovative plant-derived material is used on some of the exterior plastic parts and it
reduces manufacturing related C02 emissions by approximately 20%. Exterior parts use 100%
Recycled Plastic material in the actual device. Recycled plastic has the effectof reducing
carbon dioxide emission by 94% compared with new plastic.
Environmental
Advantage
Additional Consumable Items
Other Accessories
Genuine Toner For Said Model/Machine
Trolley For Said Model/Machine
Rate Per Unit in Rs.
(Including All taxes)
with Standard
Installation &
Required Accessories
Copier Machine Type-8
Technical Parameters
Minimum copying
45 cpm
Original Size
A3
Image Size
RAM
HDD
Technology
Resolution
Zoom
A3
1.25-GB /1.75-GB
160 GB/ 1 TB
4 Beam Laser
600X 600 dpi
25 to 400 (1%)
Zoom ratio increment
Category
1%
Standard
Std. Gigabit Ethernet
Power Requirement
220-240 V, 5.6 A
Paper Capacity
550/550 sheets
By pass
80-sheet
Multiple copying
1 to 999 (0 to 9 keypad)
51 ipm color & BW
Scanning Speed
Std., up to 9 overwrites
HDD Erase Kit
Mono-Component Toner with Toner Projection Development (No Developer Required)
Toner
Unenhanced Printing Resolution
First Print out time
Dual custom processors/1.8 GHz
Processor
Fixing method
1200 x 1200 dpi
3.8 Secs
On-Demand fixing, uses highly efficient Ceramic heater and fixing film
Energy Used in Power Save Mode
0.9W
Energy Used in Ready Mode
62.5W
Typical Energy Consumption (TEC) Value
2.4KWh
Additional Functions
ADVANCE Box
Additional shared storage available on the HDD
Users can store all types of Files - TIFF, JPEG, PDF, Word, Excel, PowerPoint, MP3
Customizable
Operation Panel
Continuous Run
Customized wall paper can be used
Only function buttons that are required can be displayed
Standard USB
Memory Media
Connectivity
Preview TIFF & JPEG files stored on USB pen drive
Replace toner while MFD is printing or copying without stopping the machine
Print TIFF & JPEG files stored on USB pen drive
Scan TIFF, JPEG, PDF & PDF Compact files directly to USB pen drive
Environmental Advantage
An innovative plant-derived material is used on some of the exterior plastic parts and it reduces manufacturing
related C02 emissions by approximately 20%. Exterior parts use 100% Recycled Plastic material in the actual device.
Recycled plastic has the effect of reducing carbon dioxide emission by 94% compared with new plastic.
45
Additional Consumable Items
Other Accessories
Genuine Toner For Said Model/Machine
Trolley For Said Model/Machine
Rate Per Unit in Rs.
(Including All taxes)
with Standard
Installation &
Required Accessories
Copier Machine Type-9
Technical Parameters
Minimum copying
Original Size
20 cpm
Image Size
RAM
HDD
Technology
A3
Resolution
600 x 600 dpi
Zoom
25-400%
Zoom ratio increment
Category
A3
2GB
250 GB
Laser multi beam laser
1%
Auto
Std Gigabit Ethernet
Power Requirement
220-240 V, 4.0 A
Std. Paper Capacity
550/550 sheets
By pass
100 sheets
Multiple copying
Fixing method
1 to 999 (0 to 9 keypad)
Processor/Bits/MHz
Dual custom processors- 1.66 GHz
JPEG, Office Open XML, PDF, PDF/A-1b, PDF (trace and smooth), compact PDF,
encrypted PDF, searchable PDF, TIFF, XPS, compact XPS, searchable XPS
On-Demand fixing, uses highly efficient Ceramic heater and fixing film
Energy Used in Power Saver Mode
0.8W
Energy Used in Ready Mode
53.4W
0.8 Khw
TEC Value
File Formats Supported
Additional Functions
Excellent Print Quality
Customizable
operation panel
Vivid & vibrant color technology With PQ Toner
Vari angle & compact for visibility of output tray
Quick startup mode
Better Security
With reminder LED, Secure print with no PIN, Functional restriction
up to 300 GSM supported ,With addition 100 mailboxes for scan and store, additional
Better productivity
paper sizes 12X18 ,Indian legal supported
ECO friendly 3 in 1 finisher (optional)
On Demand ,Eco and staple finishing
ECO friendly
ROHS certified, Lead mercury and cadmium reduction & Energy star
Standard USB memory Preview TIFF & JPEG files stored on USB pen drive, Print TIFF & JPEG files stored on
media connectivity
USB pen drive, Scan TIFF, JPEG, PDF & PDF Compact files directly to USB pen drive
Additional Consumable Items
Genuine Toner for said Model/Machine
Other accessories
Trolley for Said Model/Machine
Rate Per Unit in Rs.
Copier Machine Type-10
Technical Parameters
Minimum copying
Original Size
Image Size
RAM
HDD
30 cpm
A3
A3
2 GB
250GB
46
(Including All taxes)
with Standard
Installation &
Required Accessories
Technology
Resolution
Zoom
Zoom ratio increment
Category
4 Beam Laser
600 dpi
25 - 400 %
1%
Duplex
Std. Gigabit Ethernet
220-240 V, 4.0 A
Power Requirement
550/550 sheets
Std. Paper Capacity
100 sheets
By pass
1 to 999 (0 to 9 keypad)
Multiple copying
On-Demand fixing, uses highly efficient Ceramic heater and fixing film
Fixing method
0.8W
Energy Used in Power Saver Mode
75W
Energy Used in Ready Mode
TEC Value
Processor/Bits/MHz
File Formats Supported
0.8W
Dual custom processors- 1.66 GHz
JPEG, Office Open XML, PDF, PDF/A-1b, PDF (trace and smooth), compact PDF,
encrypted PDF, searchable PDF, TIFF, XPS, compact XPS, searchable XPS
Additional functions
Vivid & vibrant color technology With PQ Toner
Excellent Print Quality
Customizable operation Vari angle & compact for visibility of output tray
panel
Quick startup mode
Better Security
With reminder LED, Secure print with no PIN, Functional restriction
Better
up to 300 GSM supported ,With addition 100 mailboxes for scan and store, additional paper sizes
productivity
12X18 ,Indian legal supported
ECO friendly 3 in 1 finisher (optional)
On Demand ,Eco and staple finishing
ECO friendly
ROHS certified, Lead mercury and cadmium reduction & Energy star
Standard USB memory
Preview TIFF & JPEG files stored on USB pen drive, Print TIFF & JPEG files stored on
media connectivity
USB pen drive Scan TIFF, JPEG, PDF & PDF Compact files directly to USB pen drive
Additional Consumable Items
Genuine Toner For Said Model/Machine
Other accessories
Trolley For Said Model/Machine
Note: it is compulsory to attached/Machine Specifications Proof/Manufacturer’s PDFs/Technical
Documents of OEMs of Quoted Make, Model, including Warranty Card with any additional details of
Products quoted by Suppliers in detailed.
47
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement