A15-0763-310 JCMatthew 10``W 鐢靛瓙鐩告 璇存槑涔 DPF

A15-0763-310 JCMatthew 10``W 鐢靛瓙鐩告  璇存槑涔  DPF
PHOTO
2
Important Safety Precautions
Always follow these basic safety precautions when using your Digital Photo
Frame. This will reduce the risk of fire, electric shock, and injury.
Warning: To reduce the risk of fire or shock hazard, do not expose this product to
rain or moisture.
Warning: To prevent the risk of electric shock, do not remove the cover. There are
no user-serviceable parts inside. Refer all servicing to to qualified
Personnel
The Digital Photo Frame is for indoor use only.
Unplug the Digital Photo Frame before performing care and
Maintenance.
Do not block the ventilation holes on the back of the Digital Photo
Frame at any time.
Keep your Multimedia Digital Photo Frame out of direct sunlight and
heat sources.
Protect the power cord. Route power cords so that they are not likely to
be walked on or
pinched by items placed on or against them. Pay particular attention to
the point where the cord attaches to the Digital Photo Frame.
Only use the AC adapter included with the Digital Photo Frame.
Using any other power adapter will void your warranty.
Unplug the power cord from the outlet when the unit is not in use.
Cleaning the LCD Screen
Treat the screen gently. The screen is made of glass which can be scratched
or broken easily.
To clean fingerprints or dust from the LCD screen, we recommend using a
soft, non-abrasive cloth such as a camera lens cloth to clean the LCD screen.
If you use a commercial LCD Cleaning Kit, do not apply the cleaning liquid
directly to the LCD screen. Clean the LCD screen with cleaning cloth
moistened with the liquid.
Cleaning the Digital Photo Frame
Clean the outer surface of the Digital Photo Frame (excluding the screen)
with a soft cloth dampened with water.
3
Introduction
Welcome, Now you can display your digital photos directly from your memory card,
no computer is necessary. Simply insert a memory card into the Digital Photo
Frame, and turn on the power. You'll be treated to a slideshow of your photos. It's
as easy as that. You can also display individual photos, play video clips, and play
background music with your slide show.
The Digital Photo Frame includes these key features:
Displays digital photos (JPEG) without a computer.
Simply insert a compatible memory card into the digital photo frame to
show pictures, play music or supported video files (memory card not
Included).
Compatible memory cards include Secure Digital™, Multi Media Card™,
Compact Flash™,Memory Stick™, Memory Stick Pro™, Memory Stick
Duo™ and xD- Picture Card. (CF Card may not be available on some
models)
Supports up to 12 Mega Pixel image files (JPEG format).
Control the main functions with buttons on the frame or with the included
infrared remote control.
Bright TFT LCD screen.
USB2.0 high-speed connection to connect to your PC.
USB2.0 (Host) for connecting to your digital camera.
Built-in Memory. (May not be available on some models)
To learn more about your new Digital Photo Frame's features, and take full
advantage of them, please take a few minutes to read this User Guide.
What's In the Box
Digital Photo Frame
AC Power Adapter (12V, 1.5A)
User Manual
Remote Control
USB cable (Optional)
4
Setting Up the Digital Photo Frame
The Digital Photo Frame is easy to set up. Just follow these steps:
1.
Plug the AC Adapter into the Digital Photo Frame and connects it to a
wall outlet.
2.
Insert a memory card into the appropriate slot.
Slot 1 - Compact Flash™
Slot 2 - Memory Stick ™, Memory Stick Pro ™, Memory Stick Duo™, xDPicture Card™, Secure Digital™ or Multi Media Card™
Keypad
Power Button
Mini USB Port for File Transfer
USB Port for USB Flash Drives
xD-Picture Card
TM
Slot
TM
TM
Memory Stick ,Memory Stick PRO ,
Memory Stick DuoTM ,and
Memory Stick PRO DuoTM Slot
Speaker
TM
Secure Digital and
TM
Multi Media Card Slot
TM
Compact Flash Slot
Adjustable Stand
AC Power Input
Note:
The card will only fit in one direction; do not force it. The card should
fit snugly when properly inserted.
3.
Pull out adjustable stand to adjust viewing angles.
4.
Press the power on the back of Digital Photo Frame ON. The Digital
Photo Frame will automatically start a slide show of the pictures on
the card.
5.
To display photos individually press Exit button to open the Thumbnails
Screen .Use the Up and Down arrows to choose a photo. Press the
Play button (>/II) on the top of the Digital Photo Frame, or the Enter
Button on the remote control.
Note: Pull the plastic tab sticking out of the remote control. It protects the battery,
and the remote control will not work unless it is removed.
6.
To restart the Slide Show, press the Play button (>/ll) again, or press the
Slide Show button on the remote control.
5
Locating the Digital Photo Frame's Features
Photo and description of buttons on the Photo Frame.
Using the Control Buttons and Remote Control
You can use all of the Digital Photo Frame's features with either the buttons on top
of the frame or using the remote control.
Use the Control Buttons
The control buttons are located on top of the Digital Photo Frame. Their basic
functions are the same no matter when you press them.
Button
Action
<<
Move the selection up or left, display the
previous photo, or select the previous file.
>ll
Select the highlighted option, start a Slide
Show, Pause or Play.
>>
Move the selection down or right, display
the next photo or select the next file.
EXIT
Exit the current display, or go back to
previous screen.
Menu
Call up the OSD Menu mode
Power ON/OFF
6
Use the Remote Control
The remote control included with your digital Photo frame may look slightly
different from the one shown here depending on models.
Install and Replace the Remote Control Battery
1.
Hold the Remote Control with the control buttons facing downward.
2.
Press the latch and pull the tray out.
3.
Place a "CR2025" Lithium battery on the tray with the positive "+" end
facing toward you.
4.
Close the tray.
7
Setting Up the Slideshow
You can control all of the Digital Photo Frame functions with the buttons on
the top of the frame or with the remote control. To display the Select Card
menu, simply hold down the Exit button for 2 seconds, or press the Setup
button on the remote control three times.
Card Selection Screen
Use the Select Card menu to choose between memory cards and built-in memory.
(The interface included with your digital Photo frame may look slightly different
from the one shown here depending on models)
1.
To open the Select Card menu, either insert a new card, or press the Exit
button repeatedly to go back to Select Card Menu.
2.
Press the Left and Right arrows to select the desired memory card, or
built-in memory.
3.
Press Enter to make the selection. The Mode Selection Screen opens.
8
Mode Selection Screen
The Mode Selection Screen shows after you choose the memory source. Use it to
choose the type of files you wish to display. (Video & Music modes may not be
available on some models)
1.
2.
Display JPEG still photo
Photo
Play audio files (MP3).
Music
Display files in memory cards or built-in memory
File
Video
Show motion JPEG AVI movies
Time
Clock & Calendar
Press the Left and Right arrows on the Remote Control or the Digital
Photo Frame to select the mode.
Press Enter to make the selection. If you selected Photo, the Thumbnail
Screen opens.
If you selected any of the other file types, a screen listing of all of the
files with the chosen type. You can select one in the same manner as a Photo.
3.
To go back to the Mode Selection Screen, press Exit.
Thumbnail Screen
This screen shows thumbnail versions of all photos on the selected memory
source; up to 12 photos are displayed at a time. Use this screen to select a single
photo to display, or to start a Slide Show of all of the photos.
1.
Press the Arrow Buttons on the Remote Control or the Digital Photo Frame
until the desired photo is highlighted. The photo's filename is displayed at
the top of the screen.
2.
Press the Slide Show button to start a slideshow.
3.
To stop the Slide Show and return to the Thumbnail screen, press the Exit Button.
Display a Single Photo on the Full Screen
You can choose a single photo to display, without a Slide show.
1.
With the Thumbnails screen displayed, press Enter to display the selected
photo on the full screen.
2.
Press the Left Arrow to return to the previous photo.
3.
Press the Right Arrow to display the next photo.
9
4.
To stop the display and return to the Thumbnail screen, press the
Exit button.
Controlling the Slide Show and Photo
The digital Photo Frame provides many options for customizing the display, and
managing files. These options are available when viewing photos only.
Manually Change the Displayed Photo
During a Slide Show, each photo replaces the previous one at a selected
frequency (See Slide Show Speed).
You can also change the displayed photo at any time during a slide show.
Press the Left Arrow to return to the previous photo.
Press the Right Arrow to display the next photo.
Rotate the Photo
You can rotate a photo displayed full-screen using the Remote Control.
Press the rotate button to rotate the photo 90° counterclockwise.
Enlarge the Photo
To magnify a photo displayed full-screen, press the Zoom button.
The photo doubles in size each time you press the button until
it is 4x normal size.
Then it will return to normal size.
Use the Arrow buttons to move the photo so you can see the
portions that aren't currently visible.
Copy the Displayed Photo to the Built-in Memory
(May not be available on some models)
Use the Remote control to copy the displayed photo from the memory
card to the built-in memory.
1.
Press the Setup button, a setup menu opens.
2.
Press the Up or Down arrow to select Copy Photo.
3.
Press Enter. A confirmation message is displayed.
4.
Press Exit to close the menu.
Delete the Displayed Photo
Use the Remote control to delete a photo from the built-in memory.
1.
Press the Setup button. A setup menu opens.
2.
Press the Up or Down arrow to select Delete Photo.
3.
Press Enter. A confirmation message is displayed.
10
Caution: The photo will be deleted immediately; you will not be able to change your
mind.
4.
Press Exit to close the menu.
Adjust the LCD Color
Choose this option to adjust the Brightness, Contrast, Tint, and Color o the display.
1.
Press the Setup button. A setup menu opens.
2.
Press the Up or Down arrow to select Adjust LCD Color.
3.
Press Enter. A second menu opens.
4.
Use the Arrow buttons to select an option to adjust.
5.
Use the Right and Left arrows to adjust the option. The display changes.
6.
Use the Arrow buttons to select another option to adjust.
7.
When the display looks the way you want it to, press Exit to close the menu.
Add Music to the Slide Show
To play background music with a slideshow, copy audio files onto the same memory
card as your photos. The music will play as the slide show runs. See "Copying Files
from a Computer" for details on copying files.
You can also choose a music file to play without a Slideshow. Just select it from the
Music screen.
Note: Music files must be standard MP3 format and not from licensed music
download services.
11
Copy pictures from Flash Card into Built-in memory
(May not be available on some models)
(1)In the Thumbnail Screen
a. Select pictures press Up, Down, Left and Right button.
b. Confirm by press Vol+ button; Cancel by Vol- button.
c. Press Setup button firstly, then select copy picture and then copy selected.
Other way: press Setup button firstly, then select Copy Picture, and then Copy All, in
this way, all the pictures will be copied into built-in Memory.
(2) In the File Mode
a. Select files by press Up or Down button.
b. Confirm by press Vol+ button; Cancel by Vol- button.
c. Setup button firstly, then Select Copy.
Slide Show Selected
In the Thumbnail
a. Select pictures by press Up, Down, Left or Right button
b. Confirm by press Vol+ button; cancel by Vol- button.
c. Press Setup button firstly, then select Slide Show, and then Slide Show
selected.
Delete pictures from Built-in Memory
(May not be available on some models)
(1)In the Thumbnail
a. Select pictures by press Up, Down, Left or Right button.
b. Confirm by press Vol+ button; cancel by Vol- button.
c. Press the Setup button firstly, then select Delete, and then Delete Selected.
Other way: press Setup button firstly, then select Delete, and then Delete All, in this
way, all the pictures will be deleted from Built-in Memory.
(2)In the File Mode
a. Select files by press Up or Down button.
b. Confirm by press Vol+ button; Cancel by Vol- button.
c. Press Setup button firstly, then select copy picture and then copy selected.
12
Listening to Music
(May not be available on some models)
If there are Music files (MP3 format) on a memory card or in the built-in memory, you
can play them on the Digital Photo Frame.
1.
Use the Remote Control to open the Mode Selection screen and select
Music. A new screen opens listing all of the music files on the selected card.
2.
Use the left and right arrows to choose a file.
3.
Press the Enter button to play the file.
4.
To stop the music and return to the Music screen, press the Exit button.
Control the Volume
Use the Remote Control to adjust the volume on the Digital Photo Frame or when
playing Audio files. Press the VOL+/VOL - buttons to adjust the volume up or down.
Watching a Video
You can watch video files on your Digital Photo Frame. It supports the Motion JPEG
(AVI) video format used by most digital cameras.
1.
Insert a memory card with video files on it. The Select Card Screen opens.
choose the desired card.
2.
Press Enter. The Mode Selection screen opens.
3.
Use the Arrow keys to choose Video and press Enter. A screen listing all of
the video files opens.
4.
Use the Arrow buttons to choose the desired file and press Enter. The
digital Photo Frame plays the video.
5.
Adjust the volume by using VOL+/VOL buttons on the Remote Control.
6.
Press direction buttons
to select a different video file.
13
Setting Clock and Calendar
The Digital Photo Frame has built-in clock, alarm clock and calendar. Entering
Clock Mode and select Setup, you will see the options: Set Current Time.
Notice: please press Left/Right key to choose the hh-mm-MM-DD-YY, and press
Up/Down key to modify the number of time, and press Enter to save the settings.
Setting Viewing Options
You can control all viewing options in the Setup Menu using the buttons on the top
of the frame or the remote control. You can display the on-screen Setup Menu any
time the Digital Photo Frame is not displaying pictures or Video, by pressing the
Setup button.
1.
To show the Setup menu during a photo or video, press the Exit button,
then the Setup button.
2.
With the Setup menu open, use the Up and Down arrows to choose a
display option.
3.
Press Enter to select the option. A second menu opens, listing the
available settings. A white square shows the current setting.
4.
User the Up and Down arrows to choose the desired setting.
5.
Press Enter to select the setting. The second menu closes.
6.
You can make as many changes as you wish in the same manner. When
you are finished, press the Exit button to close to close the Settings
menu and return to the Thumbnails screen.
7.
The following table lists the display options in the Setup Menu, their
options, and a description of their actions.
14
Main Menu (some options may not be available depending on the model)
Display Options Settings
Language
Magic Window
(Split Screen)
Description
Choose any language from the displayed list
On
Off
Turning off magic window will allow you to
view pictures one at a time instead of four
during slide show
The Digital Photo Frame can optimize your
Display Image Size Original/Optimal photos to display on the screen.
Normal
Random
Slide Show Transition
Fade
Curtain
Special effects shown to transition from one
photo to the next in a Slide Show.
Open Door
Cross Comb
Fast
Slide Show Speed
Medium
Determines how quickly the next photo is
displayed.
Slow
Slide Show Music
On/Off
The selected music file will repeat
continuously, or play once.
Slide Show Shuffle
On/Off
Displays photos randomly.
Repeat Single
Video Playback Repeat Repeat AII
Choose to repeat a single video playback,
all videos, or none.
No Repeat
Repeat Single
Audio Playback Repeat Repeat AII
Choose to repeat a single audio file, all
audio files, or none.
No Repeat
2 Hours
Power Saving
4 Hours
8 Hours
The Digital Photo Frame will turn itself off
after the specified amount of time.
No Power Saving
Factory Default
Set Current Time
Immediately returns all settings to the factory
defaults. There is no warning message.
Clock, Alarm Clock and Calendar setting
15
Advanced Operations
In addition to the basic functions described previously, you can connect the
Digital Photo Frame to your computer to copy files to the built-in memory.
Connect to a Windows Computer
To copy files from between your computer and the Digital Photo Frame do the
following:
1.
Plug in and turn on the Digital Photo Frame.
2.
Connect the small end of the USB cable to the USB port on the side of the
digital Photo Frame.
3.
Connect the Larger end of the USB cable to a USB port on your computer.
4.
Open My Computer on your Desktop. A window showing all drives connect
to your computer opens.
5.
Each memory card slot and built-in memory are listed as Removable
Disks.
6.
Double-click the desired drive to display the files on the card. The example
below shows a card with several JPG images on it.
16
7.
To copy files from the card, simply select them and drag them to the
desired location on your computer.
8.
To copy photos from your computer to the card; first locate the files on
your computer.
Most cameras and graphic programs store photos in the Windows My
Pictures folder. If you didn't move them somewhere else, they are
Probably there.
9.
Select the files you wish to copyright-click and selects. Copy, or simply
drag them to the card's folder..
10.
Right-click in the windows, and choose Paste.
Note: lf your PC is connected to Local Area Network drives, or if you have
multiple drive letters already assigned to peripheral devices, you will
need to manager your drive settings in Windows to free up the four drive
letters immediately following your CD-ROM drive so the Digital Photo
Frame can as sign them to memory card slots properly.
Disconnect the Digital Photo Frame from the Computer
It is important not to unplug Digital Photo Frame AFTER “It is Now Safe to
Disconnect Hardware” message popped up as it may seriously damage the unit
otherwise.
1.
In Windows, look for the USB icon and select Safely Remove Hardware.
A dialog box opens
2.
Select USB Mass Storage Device and click Stop. Another Dialog box
opens.
3.
Click OK. A final dialog box opens.
4.
Select Close. When the message “It is Now Safe to Disconnect Hardware”
appears, you can disconnect the USB cable from your computer.
Connect a USB Flash Drive
Your Digital Photo Frame will see a USB Flash Drive the same way it sees memory
cards.
17
Frequently Asked Questions
Q: How do I set up my Digital Photo Frame?
A: It is very simple to get your Digital Photo Frame out of the box and running in
just a few minutes. Just plug the power adapter into the Digital Photo Frame
and into a standard Wall Socket. Insert a memory card into the appropriate
card slot on the side of the Digital Photo Frame, and turn it on. Your first slide
show will automatically start to play.
Q: What memory cards can the Digital Photo Frame Read?
A: Compatible memory cards include Secure Digital™, Multi Media Card™,
Compact Flash™,Memory Stick™, Memory Stick Pro™, Memory Stick Duo™,
and xD-Picture Card. (Compact Flash™ may not be compatible on some models.)
Q: I set up the Digital Photo Frame; why won't it turn on?
A: Check if the Adapter is securely connected to the Photo Frame and make sure
Power Switch is on.
Q: I have a memory card in the Digital Photo Frame; why can't I view my photos?
A: First, make sure that the memory card is one of the formats listed above and
that the files on the card are JPEG images files. Second, turn the Digital Photo
Frame Off and make sure that the memory card is inserted all the way into the
card slot and is facing the correction. Third, turn the Frame On. After a couple
of seconds, you should see your first photo. Press Exit to open the Card
Selection screen and select the card. Then select Photos. You should see the
Thumbnails screen listing all photos on the card. If you don't, you may want to
try another card.
Note: Some digital cameras save images in other formats. Please refer to your
camera's manual if your photos are not JPEG files
Q: Why is the picture display slower with some pictures and faster with others?
A: Higher resolution pictures load more slowly. Try using lower resolution
pictures or down
sampling your images. See your camera's operating manual for details on
downsampling your photos.
Q: Can I insert multiple memory cards?
A: Yes. Turn on the unit before inserting any card. The Card Selection Screen lets
you choose between all available memory cards.
Q: Does the Digital Photo Frame have built-in memory?
A: It depends on models. Most of our products have built-in memory.
Q: Does the Digital Photo Frame support all movie formats?
A: No, it supports JEPG and Motion JPEG (AVI) files taken from digital camera.
The Digital Photo Frame may not read all images or video files downloaded
from the Internet or from other software graphic applications.
18
Technical Specifications
Model:
DPF-BWP10
Product:
10” LCD Screen Digital Photo Frame
Resolution:
1024X600 pixel
Input Formats:
Secure Digital™, Multi Media Card™,
Compact Flash™,
Memory Stick™, Memory Stick PRO™, Memory
Stick DUO™ and USB Flash Drives. (CF may not
be available on some models)
File Formats:
Standard JPEG , Motion JPEG AVI, Mp3
Features:
Slide Show Mode
Multiple Transitional Styles for Slide Show
Variable Speed for Slide Show
Adjustable Stand for optimum Viewing Angle
Magic Window (Split Screen)
USB Ports:
USB 2.0 and Mini USB 2.0 ports
Power lncoming:
100V-240VAC,50~60HZ
Power Outgoing:
12V DC, 1.5A
Dimensions:
322 x 233x 55 (mm)
Certification:
CE/FCC/RoHS
Internal Memory:
256MB (Varies depending on Models)
Internal Speaker:
2X1.5W (May not be available on some Models)
19
www.jcmatthew.com
JCMatthew One (1) Year Return to Base Limited Warranty
JCMatthew's warranty obligations are limited to the terms set forth below:
JCMatthew warrants this hardware product against defects in materials and
workmanship for a period of ONE (1) YEAR from the date of original retail
purchase. If a defect exists, at its option JCMatthew will (1) repair the product at
no charge, using new or refurbished replacement parts, or (2) exchange the
product with a product that is new or which has been manufactured from new or
serviceable used parts and is at least functionally equivalent to the original
product. A replacement product or part assumes the remaining warranty of the
original product or thirty (30) days from the date of replacement or repair,
whichever provides longer coverage for you. When a product or part is exchanged,
any replacement item becomes your property and the replaced item becomes
JCMatthew's property.
This warranty does not apply: (a) to damage caused by accident, abuse, misuse,
misapplication, or non-JCMatthew products; (b) to damage caused by service
performed by anyone who is not a JCMatthew Repair Agent; (c) to a product or a
part that has been modified without the written permission of JCMatthew.
JCMatthew is not responsible for any data or images that may be lost during repair
or transit. JCMatthew is not liable for any damage to product during transit and it is
customer's responsibility to ensure that the product is adequately packaged.
To obtain warranty services please return to the store where you purchased from.
You will be asked to furnish your name, address, telephone number, and proof of
the original purchase (receipt) containing a description of the product, purchase
date, and the appropriate serial number. ]
More information please check the customer services online at
www.jcmatthew.com or e-mail to [email protected]
JCMatthew and JCMatthew Logo are trademarks registered in worldwid countries.
Copyright 2007 © JCMatthew
20
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement