null null

LABORATORY FAUCETS
WATER VALVE
MODEL NUMBER:
7270.001 Water fitting with removable serrated
hose nozzle
GENERAL DESCRIPTION:
Cast brass construction faucet designed specifically for
laboratory water applications. Polished chrome plated finish,
cross handle with water service button.
PRODUCT FEATURES:
• Cast Brass Construction: Durable-excellant in high
use applications.
• Removable serrated hose nozzle
• Cross handle with water index button
• Slow compression cartridge
• Polished chrome finish
• 3/8" NPT male inlet thread
INDEX CW
1" [25mm] HEX
3"
[76mm]
3/8" NPT MALE
THREAD INLET
1/2"
[13mm]
5-5/8"
[143mm]
CODES AND STANDARDS:
These products meet or exceed the following coded standards:
ANSI A112.18.1
CSA B125
SUGGESTED SPECIFICATION:
Laboratory water faucet shall feature a brass body construction, a slow compression cartridge and a removable serrated hose
nozzle. Fitting shall also have color-coded index buttons. Fitting shall be American Standard Model # 7270. ____.___.
© 2006 American Standard Inc.
L139
LABORATORY FAUCETS
NEEDLE VALVE
MODEL NUMBER:
7270.551 Gas, air, vacuum fitting with removable
serrated hose nozzle.
GENERAL DESCRIPTION:
Faucet designed specifically for laboratory gas applications.
Solid brass construction with a high-gloss polished chrome
plated finish, cross handle with air, gas, and vacuum index
buttons.
PRODUCT FEATURES:
• Solid Brass Construction: durable and excellent in high
use applications
• Removable serrated hose nozzle
• Cross handle with air, gas, and vacuum button
• Needle valve
• Polished chrome finish
• Maximum working pressure 150 PSI
• 3/8" NPT male inlet thread
INDEX AS REQUIRED
(AIR, GAS, VAC)
1" (25mm) HEX
3-1/4"
(83mm)
3/8" NPT MALE
THREAD INLET
1/2"
(13mm)
5-5/8"
(143mm)
CODES AND STANDARDS:
These products meet or exceed the following coded standards:
ANSI Z21.5A
CGA 9.1M
SUGGESTED SPECIFICATION:
Laboratory gas fitting shall feature a brass body construction, a needle or ball valve, a removable serrated hose nozzle, and
have air, gas, and vacuum index buttons. Fitting shall be American Standard Model # 7270.____.___.
© 2006 American Standard Inc.
L141
LABORATORY FAUCETS
MULTI SERVICE VALVE
MODEL NUMBER:
7270.500 Gas, air, vacuum fitting with removable
serrated hose nozzle.
GENERAL DESCRIPTION:
Multiple service faucet designed for virtually any labatory
gas. Solid brass construction with a high-gloss polished
chrome plated finish and colored coded handle index
buttons.
PRODUCT FEATURES:
• Cast Brass Construction: Durable-excellant in high
use applications.
• Ball valve
• Removable serrated hose nozzle
• Lever handle with index button (air, gas, and vacuum)
• Polished chrome finish
• For use with 125 PSI maximim working pressure
• 3/8" NPT male inlet thread
INDEXED "AIR", "GAS"
OR VACUUM
3-1/8"
(79mm)
3/8" NPT MALE
THREAD INLET
1-7/8"
(48mm)
1/2"
(13mm)
1/2"
(13mm)
1-1/4"
(32mm)
4-1/2"
(114mm
CODES AND STANDARDS:
These products meet or exceed the following coded standards:
ANSI Z21.5A
CGA 9.1M
SUGGESTED SPECIFICATION:
Laboratory gas fitting shall feature a brass body construction, a needle or ball valve, a removable serrated hose nozzle, and
have air, gas and vacuum index buttons. The fitting shall also meet ANSI Z21.5 standard. Fitting shall be American Standard
Model # 7270.____.___.
© 2006 American Standard Inc.
L143
LABORATORY FAUCETS
MULTI SERVICE VALVE WITH INLET CHECK VALVE
MODEL NUMBER:
7270.501 Air, gas fitting with removable serrated
hose nozzle and inlet check valve
GENERAL DESCRIPTION:
Multiple service faucet designed for laboratory air and gas.
Solid brass construction with a high-gloss polished chrome
plated finish and colored coded handle index buttons.
PRODUCT FEATURES:
• Cast Brass Construction
• Ball valve
• Removable serrated hose nozzle outlet with intergal
check valve
• Lever handle with index button (air, gas)
• Polished chrome finish
• For use with 125 PSI maximim working pressure
• 3/8" NPT male inlet thread
INDEXED "AIR" OR "GAS"
3-1/8"
(79mm)
3/8" NPT MALE
THREAD INLET
1-7/8"
(48mm)
1/2"
(13mm)
1/2"
(13mm)
INTEGRAL CHECK
IN SERRATED TIP
1-1/4"
(32mm)
4-1/2"
(114mm
CODES AND STANDARDS:
These products meet or exceed the following coded standards:
ANSI Z21.5A
CGA 9.1M
SUGGESTED SPECIFICATION:
Laboratory gas fitting shall feature a brass body construction, a needle or ball valve, a removable serrated hose nozzle with
integral check valve, and have air and gas index buttons. The fitting shall also meet ANSI Z21.5. Fitting shall be American
Standard Model # 7270.____.___.
© 2006 American Standard Inc.
L145
LABORATORY FAUCETS
FUME HOOD FITTING
MODEL NUMBER:
7271.400 Wall mount fume hood fitting with
removable angled serrated hose nozzle
GENERAL DESCRIPTION:
Wall mount fume hoot fitting with removable angled serrated
hose nozzle. Solid brass construction with high-gloss
polished chrome plated finish.
PRODUCT FEATURES:
• Solid Brass Construction: durable and excellent in high
use applications
• Wall mount remote control and assembly
• Removable angled serrated hose nozzle
• 3/8" NPT x 2-5/8" inlet shank with locknut and washer
1/16"- 1-1/4"
(2mm-32mm)
WARE THICKNESS
11/16" DIA.
[17mm]
2-1/8"
(54mm)
2-1/8 " (54mm)
DIA. FLANGE
3/8" NPT MALE
THREAD INLET
4 "
(102mm)
CODES AND STANDARDS:
These products meet or exceed the following coded standards:
ANSI Z21.5A
CGA 9.1M
SUGGESTED SPECIFICATION:
Laboratory fitting shall be wall mount remote control end fitting, feature a brass body construction, and a removable angled
serrated hose nozzle. Fitting shall be American Standard Model # 7271.____.___.
© 2006 American Standard Inc.
L147
LABORATORY FAUCETS
FUME HOOD FITTING
MODEL NUMBER:
7271.300 Wall mount fume hood gooseneck fitting
with removable serrated hose nozzle
GENERAL DESCRIPTION:
Wall mount fume hood remote control end fitting with
rigid/swing gooseneck spout and removable serrated hose
nozzle. Solid brass construction with a high-gloss polished
chrome plated finish.
PRODUCT FEATURES:
• Solid Brass Construction: durable and excellent in high
use applications
• Removable serrated hose nozzle
• Rigid/Swing gooseneck spout
• Wall mount remote control end assembly
• 3/8" NPT x 4-3/4" inlet shank
3-1/4"
(83mm)
2-3/8" (60mm)
MAXIMUM
WARE THICKNESS
11"
(279mm)
3/8" NPT
MALE
THREAD
INLET
2 " DIA.
(51mm)
5-3/8"
(137mm)
3˚
4-1/2"
(114mm)
2"
(51mm)
2-7/8"
(73mm)
CODES AND STANDARDS:
These products meet or exceed the following coded standards:
ANSI A112.18.1
CSA B125
SUGGESTED SPECIFICATION:
Laboratory fitting shall be a wall mount remote control end fitting,feature a brass body construction, a removable serrated hose
nozzle, and rigid/swing gooseneck spout. The fitting shall also meet ANSI A122.8.1 standard. Fitting shall be American
Standard Model # 7271.____.___.
© 2006 American Standard Inc.
L149
LABORATORY FAUCETS
FUME HOOD FITTING
MODEL NUMBER:
7271.301 Wall mount fume hood vacuum breaker
gooseneck fitting with removable serrated
hose nozzle
GENERAL DESCRIPTION:
Wall mount remote control end fitting with rigid/swing
vacuum breaker gooseneck spout and removable serrated
hose nozzle. Solid brass construction with high-gloss
polished chrome-plated finish.
PRODUCT FEATURES:
• Solid Brass Construction: durable and excellent in high
use applications
• Polished chrome finish
• Rigid/Swing vacuum breaker gooseneck spout
• Removable serrated hose nozzle
• Wall mount remote control end assembly
• 3/8" NPT x 4-3/4" inlet shank
1-1/2"
(38mm)
2-3/8" (60mm)
MAXIMUM
WARE THICKNESS
3-1/4"
(83mm)
3/8" NPT
MALE
THREAD
INLET
10-3/4"
(273mm])
6"
(152mm)
4-1/2"
(114mm)
3˚
2"
[51mm]
2 " DIA.
(51mm])
2-7/8"
(73mm)
CODES AND STANDARDS:
These products meet or exceed the following coded standards:
ANSI A112.18.1
CSA B125
SUGGESTED SPECIFICATION:
Laboratory fitting shall be a wall mount remote control end fitting, feature a brass body construction, a removable serrated hose
nozzle, and rigid/swing vacuum breaker gooseneck spout. The fitting shall also meet ANSI112.18.1 standard. Fitting shall be
American Standard Model # 7271.____.___.
© 2006 American Standard Inc.
L151
LABORATORY FAUCETS
COMBO VALVE AND TURRET
MODEL NUMBER:
7274.511 Combo valve and turret fitting with single
ball valve
7274.511VR Vandal resistant combo valve and
turret fitting with single ball valve
GENERAL DESCRIPTION:
Combo valve and turret fitting. Solid brass construction. Air
and gas index buttons included. Designed to operate from
0.5 to 125 psi pressure.
PRODUCT FEATURES:
•
•
•
•
Turret with single ball valve
Removable serrated hose nozzle with check valve
Air and gas index buttons included
3/8" NPT x 4-3/4" inlet shank included - makes for easy
installation
• Polished chrome finish
• Lever handle
INDEXED 'AIR', 'GAS', VAC.
3-1/8"
[79mm]
3-7/8"
[98mm]
3/8" NPT FEMALE
THREAD INLET
1-1/8"
[29mm]
2" DIA.
[51mm]
2-3/8" [60mm]
MAXIMUM
WARE THICKNESS
11/16"
[17mm]
3-1/4"
[83mm]
11/16" DIA.
[17mm]
2"
[51mm]
PIN LENGTH
3/8"[10mm]
1/4" DIA. [6mm]
3/8" NPT MALE
THREAD INLET
CODES AND STANDARDS:
These products meet or exceed the following coded standards:
ANSI Z21.15A
CGA9.1M
SUGGESTED SPECIFICATION:
Laboratory fitting shall feature a combination of valve and turret, solid brass construction, ball valve, and removable serrated
hose nozzle with check valve. The fitting shall also meet ANSI Z21.15 standard. Fitting shall be American Standard Model #
7274.____.___.
© 2006 American Standard Inc.
L153
LABORATORY FAUCETS
COMBO VALVE AND TURRET
MODEL NUMBER:
7274.515 Combo valve and turret fitting with single
needle valve and cross handle design
GENERAL DESCRIPTION:
Combo valve and turret fitting with single needle valve. Solid
brass construction. Cross handle with air, gas, and vacuum
buttons included.
PRODUCT FEATURES:
•
•
•
•
•
•
•
Turret with single needle valve
Removable serrated hose nozzle
Cross handle with air, gas, and vacuum index buttons included
3/8" NPT x 4-3/4" inlet shank included - makes for easy installation
Polished chrome finish
3/8" NPT female threaded inlet
3/8" NPT female outlet thread
INDEXED 'AIR', 'GAS', VAC.
2-3/8"
(60mm)
5-3/8" OPEN
(137mm)
5-1/8" CLOSED
(130mm)
3/8" NPT FEMALE
THREAD INLET
3-1/4"
(83mm)
2-3/8" (60mm)
MAXIMUM
WARE THICKNESS
1-1/8"
(29mm)
2" DIA.
(51mm)
11/16" DIA.
(17mm)
3/8" NPT MALE
THREAD INLET
CODES AND STANDARDS:
These products meet or exceed the following coded standards:
ANSI Z21.5A
CGA 9.1M
SUGGESTED SPECIFICATION:
Laboratory fitting shall feature a combination of valve and turret, solid brass construction, needle valve, and removable serrated
hose nozzle. Fitting shall be American Standard Model # 7274.____.___.
© 2006 American Standard Inc.
L155
LABORATORY FAUCETS
COMBO VALVE AND TURRET
MODEL NUMBER:
7274.521 Combo valve and turret fitting with two
ball valves at 180° with lever handles
7274.521VR Combo valve and turret fitting with
two vandal resistant ball valves
at 180° with lever handles
GENERAL DESCRIPTION:
Combo valve and turret with two ball valves at 180°. Solid
durable brass construction. Lever handles with air, gas,
and vacuum index buttons. Designed to operate from 0.5 to
125 psi pressure.
PRODUCT FEATURES:
• Turret with two ball valves at 180°
• Removable serrated hose nozzle
• Air, gas, and vacuum index buttons included
• 3/8" NPT x 4-3/4" inlet shank with locknuts and washer
included - makes for easy installation
• Polished chrome finish
5"
(127mm)
INDEXED 'AIR' OR 'GAS'
3-1/8"
(79mm)
3-7/8"
(98mm)
2"
(51mm)
2" DIA.
(51mm)
3-1/4"
(83mm)
2-3/8" (60mm)
MAXIMUM
WARE THICKNESS
11/16"
(17mm)
11/16" DIA.
(17mm)
PIN LENGTH
3/8" (10mm)
1/4" DIA. (6mm)
3/8" NPT MALE
THREAD INLET
CODES AND STANDARDS:
These products meet or exceed the following coded standards:
ANSI Z21.15A
CGA 9.1M
SUGGESTED SPECIFICATION:
Laboratory fitting shall feature a combination of valve and turret, solid brass construction, two ball valves at 180°, and removable
serrated hose nozzle. The fitting shall also meet ANSI Z21.15A. Fitting shall be American Standard Model # 7274.____.___.
© 2006 American Standard Inc.
L157
LABORATORY FAUCETS
COMBO VALVE AND TURRET
MODEL NUMBER:
7274.525 Combo valve and turret fitting with two
needle valves at 180° with cross handles
GENERAL DESCRIPTION:
Combo valve and turret with two needle valves at 180°.
Solid durable brass construction. Cross handle design with
air, gas and vacuum index buttons.
PRODUCT FEATURES:
•
•
•
•
Turret with two needle valves at 180°
Removable serrated hose nozzle
Air, gas, and vacuum index buttons included
3/8" NPT x 4-3/4" inlet shank with locknuts and washer
makes for easy installation
• Polished chrome finish
6"
(152mm)
12"
(305mm)
INDEXED AS REQUIRED
(AIR, GAS, VAC)
2-3/8"
(60mm)
5-3/8"OPEN
(137mm)
5-1/8" CLOSED
(130mm)
2"
(51mm)
1-1/8"
(29mm)
3/8" NPT FEMALE
THREAD INLET
2-3/8" (60mm)
MAXIMUM
WARE THICKNESS
3-1/4"
(83mm)
CODES AND STANDARDS:
2" DIA.
(51mm)
11/16"DIA.
(17mm)
3/8" NPT MALE
THREAD INLET
These products meet or exceed the following coded standards:
ANSI Z21.5A
CGA 9.1M
SUGGESTED SPECIFICATION:
Laboratory fitting shall feature a combination of valve and turret, solid brass construction, two needle valves at 180°, and
removable serrated hose nozzle. Fitting shall be American Standard Model # 7274.____.___.
© 2006 American Standard Inc.
L159
LABORATORY FAUCETS
PURE WATER FITTING
MODEL NUMBER:
7275.300 Deck mounted distilled water
rigid/swing gooseneck fitting
GENERAL DESCRIPTION:
Deck mounted tin lined distilled water rigid/swing
gooseneck spout with tin lining fitting designed for a
wide variety of pure water laboratory applications. Solid
durable brass construction. Cross handle design.
PRODUCT FEATURES:
•
•
•
•
•
Removable serrated tin lined hose nozzle
Cross handle design with DI index button
Tin lined self-closing cartridge
Rigid/swing gooseneck spout with tin lining
Polished chrome finish
3˚
3-1/2"
(89mm)
INDEX
'DW'
13"
(330mm)
5-3/8"
(140mm)
6-3/8"
(162mm)
2" DIA.
(51mm)
7/8"DIA.
(22mm)
1/16"-1-3/8"
(2mm-35mm)
WARE THICKNESS
4-1/8"
(105mm)
1/4" NPT MALE
THREAD INLET
CODES AND STANDARDS:
These products meet or exceed the following coded standards:
ASME A112.18.1M
CSA B125
SUGGESTED SPECIFICATION:
Laboratory faucet shall feature a brass body construction, a removable serrated tin lined hose nozzle, a rigid/swing gooseneck
spout with tin lining, and a tin lined self-closing cartridge. The fitting shall also meet ASME A112.18.1 standard. Fitting shall be
American Standard Model # 7275.____.___.
© 2006 American Standard Inc.
L161
LABORATORY FAUCETS
PURE WATER FITTING
MODEL NUMBER:
7275.100 Deck mounted pure water rigid/swing
gooseneck fitting with self-closing push valve
GENERAL DESCRIPTION:
Deck mounted pure water rigid/swing gooseneck
fitting designed for a wide variety of pure water
laboratory applications. Solid durable brass
construction. Self-closing/full flow push handle.
Designed to work for 60 psi maximum pressure.
PRODUCT FEATURES:
•
•
•
•
•
Chrome plated Tygon® lining spout
High purity plastic Celcon® valve
Serrated hose nozzle
Polished chrome finish
Self-closing/full flow push handle
12"
305mm)
4-1/8"
(105mm)
3˚
5-5/8"
(143mm)
2" DIA.
(51mm)
7/8" DIA. (22mm)
4-1/8"
(105mm)
1/16"-1-5/8"
(2mm-41mm)
WARE THICKNESS
1/2" NPT MALE
THREAD INLET
SUGGESTED SPECIFICATION:
Laboratory faucet shall feature a brass body construction, a removable serrated hose nozzle with a self-closing/full flow push
handle, a rigid/swing gooseneck spout, and a high purity valve. Fitting shall be American Standard Model # 7275.____.___.
© 2006 American Standard Inc.
L163
LABORATORY FAUCETS
PURE WATER FITTING
MODEL NUMBER:
7275.200 Deck mounted pure water fitting with
cross handle
GENERAL DESCRIPTION:
Deck mounted pure water fitting designed for a wide variety
of pure water laboratory applications. Solid durable brass
construction.Three arm PVDF handle. Designed to work for
60 psi maximum pressure.
PRODUCT FEATURES:
•
•
•
•
•
PVDF liner with chrome plated brass housing
3/8" male serrated hose nozzle
PVDF cartridge
PVDF 3/8" NPT male inlet
3 arm PVDF handle
6"
(152mm)
12-1/2"
(318mm)
8-7/8"
(226mm)
2-1/8" DIA.
(54mm)
2-3/4"
(70mm)
MINIMUM 18"
(457mm)
7/8"DIA. (22mm)
1/16"-1-3/8"
(2mm-35mm)
WARE THICKNESS
PFA TUBING
1/4" (6mm) O.D.
POLYPROPYLENE TUBE FITTING
3/8" NPT MALE THREAD INLET
SUGGESTED SPECIFICATION:
Laboratory faucet shall feature a PVDF liner with chrome plated brass construction, a serrated hose nozzle and 3 arm PVDF
handle. Fitting shall be American Standard Model # 7275.____.___.
© 2006 American Standard Inc.
L165
LABORATORY FAUCETS
SINGLE HOLE FITTING
MODEL NUMBER:
7272.120 Deck mounted single water inlet fitting
GENERAL DESCRIPTION:
Deck mount single water inlet rigid/swing gooseneck fitting
ideal for any laboratory application. Solid durable brass
construction. Cross handle design with cold water index
button.
PRODUCT FEATURES:
•
•
•
•
•
Removable serrated hose nozzle
Slow compression cartridge
Polished chrome finish
Rigid/swing gooseneck spout
Cross handle with cold water index button
PLAN VIEW HOLE LOCATION
FOR BODY SHANK AND PIN (SINGLE CONTROL)
15/16" DIA.
[24mm]
23/32"
[18mm]
1/4" DIA.
[6mm]
13 "
[330mm]
5-1/4 "
[133mm]
3˚
3"
[76mm]
6-3/8"
[162mm]
INDEX
'CW'
2" DIA.
[51mm]
7/8 " DIA. [22mm]
1/2" NPSM COUPLING
NUT FOR 3/8" OR 1/2"
FLEXIBLE RISER
2-3/8"
[60mm]
1/8"-1-3/8"
[3mm-35mm]
WARE THICKNESS
CODES AND STANDARDS:
These products meet or exceed the following coded standards:
ANSI A112.18.1
CSA B125
SUGGESTED SPECIFICATION:
Laboratory faucet shall feature a brass body construction with slow compression cartridge, rigid/swing gooseneck spout, and a
removable serrated hose nozzle. The fitting shall also meet ANSI A112.18.1 standard. Fitting shall be American Standard Model
# 7272.____.___.
© 2006 American Standard Inc.
L167
LABORATORY FAUCETS
SINGLE HOLE FITTING
MODEL NUMBER:
7272.121 Deck mounted single water inlet fitting
with rigid/swing vacuum breaker
7272.121VR Vandal resistant
GENERAL DESCRIPTION:
Deck mounted single water inlet rigid/swing gooseneck fitting
ideal for any laboratory application. Solid durable brass
construction with rigid/swing vacuum breaker. Cross handle
design with cold water index button.
PRODUCT FEATURES:
•
•
•
•
•
•
Removable serrated hose nozzle
Slow compression cartridge
Polished chrome finish
Vacuum breaker
Rigid/swing gooseneck spout
Cross handle with cold water index button
12-3/4"
(324mm)
3˚
PLAN VIEW HOLE LOCATION
FOR BODY SHANK AND PIN (SINGLE CONTROL)
INDEX
'CW'
15/16" DIA.
(24mm)
23/32"
(18mm)
1/4" DIA.
(6mm)
2 " DIA.
(51mm)
2-3/8"
(60mm)
1/4" (6mm) PIN
LENGTH X 3/16"
(5mm) DIA.
1/2" NPSM COUPLING
NUT FOR 3/8" OR 1/2"
6"
(152mm)
6-5/8"
(168mm)
7/8 "DIA. (22mm)
1/8"-1-3/8"
(3mm-35mm)
WARE THICKNESS
FLEXIBLE RISER
CODES AND STANDARDS:
These products meet or exceed the following coded standards:
ANSI A112.18.1
CSA B125
SUGGESTED SPECIFICATION:
Laboratory faucet shall feature a brass body construction with slow compression cartridge, a removable serrated hose nozzle,
vacuum breaker, and rigid/swing gooseneck spout. The fitting shall also meet ANSI A112.18.1 standard. Fitting shall be
American Standard Model # 7272.____.___.
© 2006 American Standard Inc.
L169
LABORATORY FAUCETS
SINGLE HOLE FITTING
MODEL NUMBER:
7272.220 Deck mounted hot and cold water fitting
with two cross handles
GENERAL DESCRIPTION:
Deck mounted hot and cold water rigid/swing gooseneck
fitting ideal for any laboratory application. Solid durable
brass construction with two cross handle hot and cold water
index buttons.
PRODUCT FEATURES:
•
•
•
•
•
•
Removable serrated hose nozzle
Slow compression cartridge
3/8" O.D. copper supply tubes
Polished chrome finish
Cross handles with hot and cold water index buttons
Rigid/swing gooseneck spout
5-1/4"
(133mm)
7-3/8"
(187mm)
1/4" DIA.
(6mm)
23/32"
(18mm)
3˚
6-3/8"
(162mm)
PLAN VIEW HOLE LOCATION
FOR BODY SHANK AND PIN (DUEL CONTROL)
1-1/8" DIA.
(29mm)
13 "
(330mm)
2" DIA.
(51mm)
14-3/8"
(365mm)
1-1/16"
(27mm)
12-1/4"
(311mm)
1/8"-1-5/8"
(3mm-41mm)
WARE THICKNESS
3/8" (9.5mm) O.D. COPPER
TUBBING FOR 3/8" (9.5mm)
COMPRESSION CONNECTIONS
CODES AND STANDARDS:
These products meet or exceed the following coded standards:
ANSI A112.18.1
CSA B125
SUGGESTED SPECIFICATION:
Laboratory faucet shall feature a brass body construction with slow compression cartridge, a removable serrated hose nozzle,
rigid/swing gooseneck spout, and two cross handles. The fitting shall also meet ANSI A112.18.1 standard. Fitting shall be
American Standard Model # 7272.____.___.
© 2006 American Standard Inc.
L171
LABORATORY FAUCETS
SINGLE HOLE FITTING
MODEL NUMBER:
7272.221 Deck mounted hot and cold water fitting
with two cross handles and vacuum
breaker
7272.221VR Vandal resistant
GENERAL DESCRIPTION:
Deck mounted hot and cold water rigid/swing vacuum
breaker gooseneck fitting ideal for any laboratory application.
Solid durable brass construction with two cross handle hot
and cold water index buttons.
PRODUCT FEATURES:
•
•
•
•
•
•
Removable serrated hose nozzle
Slow compression cartridge
3/8" O.D. copper supply tubes
Polished chrome finish
Rigid/swing vacuum breaker gooseneck spout
Cross handle with hot and cold water index button
7-3/8"
[187mm]
PLAN VIEW HOLE LOCATION
FOR BODY SHANK AND PIN (DUEL CONTROL)
1-1/8" DIA.
(29mm)
1/4" DIA.
(6mm)
23/32"
(18mm)
3˚
13-1/4"
(337mm)
6"
(152mm)
7-1/8"
(181mm)
2" DIA.
(51mm)
1/4" (6mm) PIN
LENGTH X 3/16"
(5mm) DIA.
14-3/8"
(365mm)
12-1/4"
(311mm)
1/8"-1-5/8"
(3mm-41mm)
WARE THICKNESS
1-1/16" DIA.
(27mm)
3/8" (9.5mm) O.D. COPPER
TUBBING FOR 3/8" (9.5mm)
COMPRESSION CONNECTIONS
CODES AND STANDARDS:
These products meet or exceed the following coded standards:
ANSI A112.18.1
CSA B125
SUGGESTED SPECIFICATION:
Laboratory faucet shall feature a brass body construction with slow compression cartridge, a removable serrated hose nozzle, a
rigid/swing vacuum breaker gooseneck spout, and two cross handles. The fitting shall also meet ANSI A112.18.1 standard.
Fitting shall be American Standard Model # 7272.____.___.
© 2006 American Standard Inc.
L173
LABORATORY FAUCETS
SINGLE HOLE FITTING
MODEL NUMBER:
7272.201 Deck mount hot and cold water fitting
with two wrist blade handles and
vacuum breaker
GENERAL DESCRIPTION:
Deck mount hot and cold water rigid/swing vacuum breaker
gooseneck fitting ideal for any laboratory application. Solid
durable brass construction with two wrist blade handles hot
and cold water index buttons.
PRODUCT FEATURES:
•
•
•
•
•
Removable serrated hose nozzle
3/8" O.D. copper supply tubes
Polished chrome finish
Rigid/swing vacuum breaker gooseneck spout
Lever handles with hot and cold water index buttons
10"
(254mm)
3˚
6"
(152mm)
PLAN VIEW HOLE LOCATION
FOR BODY SHANK AND PIN (DUEL CONTROL)
1-1/8" DIA.
(29mm)
13-1/4"
(337mm)
7-1/8"
(181mm)
1/4" DIA.
(6mm)
2" DIA.
(51mm)
23/32"
(18mm)
14-3/8"
(365mm)
12-1/4"
(311mm)
1/4" (6mm) PIN
LENGTH X 3/16"
(5mm) DIA.
1-1/16" DIA.
(27mm)
1/8"-1-5/8"
(3mm-41mm)
WARE THICKNESS
3/8" (9.5mm) O.D. COPPER
TUBBING FOR 3/8" (9.5mm)
COMPRESSION CONNECTIONS
CODES AND STANDARDS:
These products meet or exceed the following coded standards:
ANSI A112.18.1
CSA B125
SUGGESTED SPECIFICATION:
Laboratory faucet shall feature a brass body construction with a removable serrated hose nozzle, rigid/swing vacuum breaker
gooseneck spout, and two lever handles. The fitting shall also meet ANSI A112.18.1 standard. Fitting shall be American
Standard Model # 7272.____.___.
© 2006 American Standard Inc.
L175
LABORATORY FAUCETS
TURRETS AND FLANGES/COMBO VALVES
MODEL NUMBER:
7274.580 Combination valve and flange fitting with
ball valve and inlet shank. Lever handle.
GENERAL DESCRIPTION:
Wall flange with ball valve and inlet shank fitting. Solid brass
construction with lever handle with air, gas, and vacuum
index buttons. Designed to operate up to 125 psi pressure.
Vacuum application to approximately 29.9 Hg.
PRODUCT FEATURES:
•
•
•
•
•
Removable serrated hose nozzle
Air, gas, and vacuum index buttons
3/8" NPT male inlet thread
3/8" NPT x 2-5/8" inlet shank with locknut and washer
Polished chrome finish
3-1/8"
(79mm)
INDEX AS REQUIRED
(AIR, GAS, VAC)
1/16"- 1-1/4"
(2mm-32mm)
WARE THICKNESS
1-7/8"
(48mm)
11/16" DIA.
(17mm)
2-1/8 "
(54mm)
2-1/8" (54mm)
DIA. FLANGE
5-1/2"
(140mm)
3/8" NPT MALE
THREAD INLET
CODES AND STANDARDS:
These products meet or exceed the following coded standards:
ANSI Z21.15
CGA 9.1
SUGGESTED SPECIFICATION:
Laboratory fitting shall feature a combination of valve and turret, solid brass construction, ball valve, and removable serrated
hose nozzle. The fitting shall also meet ANSI Z21.15 standard. Fitting shall be American Standard Model # 7274.____.___.
© 2006 American Standard Inc.
L177
LABORATORY FAUCETS
TURRETS AND FLANGES/COMBO VALVES
MODEL NUMBER:
7274.585 Combination valve and flange fitting
with needle valve and inlet shank.
Cross handle.
GENERAL DESCRIPTION:
Wall flange with needle valve and inlet shank turret fitting.
Solid brass construction with cross handle with air, gas, and
vacuum index buttons. Designed to operate up to 125 psi
pressure. Vacuum application to approximately 29.9 Hg.
PRODUCT FEATURES:
•
•
•
•
•
Removable serrated hose nozzle
Air, gas, and vacuum index buttons
3/8" NPT male inlet thread
3/8" NPT x 2-5/8" inlet shank with locknut and washer
Polished chrome finish
3-3/4"
(95mm)
INDEX AS REQUIRED
(AIR, GAS, VAC)
3-1/4"
(83mm)
1/16” - 1-1/4"
(2mm-32mm)
WARE THICKNESS
11/16" DIA.
(17mm)
2-1/8 "
(54mm)
2-1/8" (54mm)
DIA. FLANGE
6-5/8"
(168mm)
3/8" NPT MALE
THREAD INLET
CODES AND STANDARDS:
These products meet or exceed the following coded standards:
ANSI Z21.5A
CGA 9.1M
SUGGESTED SPECIFICATION:
Laboratory fitting shall feature a combination of valve and turret, solid brass construction, needle valve, and removable serrated
hose nozzle. Fitting shall be American Standard Model # 7274.____.___.
© 2006 American Standard Inc.
L179
LABORATORY FAUCETS
COMBINATION FITTINGS/MULTIPLE SERVICE FITTINGS
MODEL NUMBER:
7272.510 Deck mounted rigid/swing gooseneck
spout multiple service fitting
GENERAL DESCRIPTION:
Deck mount multiple gas and water service laboratory
rigid/swing gooseneck spout fitting. Ideal for conserving
countertop space and high use laboratory applications.
Designed to operate up to 125 psi pressure.
PRODUCT FEATURES:
•
•
•
•
•
•
•
•
Removable serrated hose nozzle
Cross handle design with cold water index button
Two laboratory ball valves included
Slow compression cartridge
Shank hardware assembly included
3/8" NPT male inlet shank
Rigid/swing gooseneck spout
High-gloss polished chrome finish
MOUNTING HOLE TEMPLATE
1-15/16"
(49mm)
5-1/2"
(140mm)
31/32"
[24mm]
3˚
5-3/8"
(137mm)
INDEX 'CW'
5-3/8"
(137mm)
9-3/4"
(248mm)
3/4" DIA.
(THREE HOLES)
16-1/4"
(413mm)
TURRET DETAIL
INDEX 'GAS'
1-15/16"
(49mm)
A
4-7/8"
(124mm)
2-3/8"
(60mm)
1-5/16"
(33mm)
A
3-3/16"
DIA.
(81mm)
3/8" NPT FEMALE
THREAD INLET
(3 PLACES)
CODES AND STANDARDS:
These products meet or exceed the following coded standards:
ANSI Z21.5a
CGA 9.1M
SUGGESTED SPECIFICATION:
2-1/8"
(54mm)
SECTION
A-A
Laboratory faucet shall feature a brass body construction with slow compression cartridge, a removable serrated hose nozzle,
two laboratory ball valves, and a cross handle. The fitting shall also meet ANSI Z21.5 standard. Fitting shall be American
Standard Model # 7272.____.___.
© 2006 American Standard Inc.
L181
LABORATORY FAUCETS
COMBINATION FITTINGS/MULTIPLE SERVICE FITTINGS
MODEL NUMBER:
7272.511 Deck mounted rigid/swing vacuum
breaker gooseneck spout multiple
service fitting
GENERAL DESCRIPTION:
Deck mount multiple gas and water service laboratory rigid/
swing vacuum breaker gooseneck spout fitting. Ideal for
conserving countertop space and high use laboratory
applications. Designed to operate up to 125 psi pressure.
PRODUCT FEATURES:
•
•
•
•
•
•
•
•
Removable serrated hose nozzle
Cross handle design with cold water index button
Two laboratory ball valves included
Slow compression cartridge
Shank hardware assembly included
3/8" NPT male inlet shank
High-gloss polished chrome finish
Rigid/swing vacuum breaker gooseneck spout
1-1/2"
[38mm]
MOUNTING HOLE TEMPLATE
1-15/16"
(49mm)
31/32"
[24mm]
5-1/2"
(140mm)
3˚
5-3/8"
(137mm)
INDEX 'CW'
9-3/4"
(248mm)
5-3/8"
(137mm)
INDEX 'GAS'
3/4" DIA.
(THREE HOLES)
16"
(406mm)
TURRET DETAIL
1-15/16"
(49mm)
A
4-7/8"
(124mm)
2-3/8"
(60mm)
1-5/16"
(33mm)
A
3-3/16"
DIA.
(81mm)
3/8" NPT FEMALE
THREAD INLET
(3 PLACES)
CODES AND STANDARDS:
2-1/8"
(54mm)
SECTION
A-A
These products meet or exceed the following coded standards:
ANSI Z21.5a
CGA 9.1M
SUGGESTED SPECIFICATION:
Laboratory faucet shall feature a brass body construction with slow compression cartridge, a removable serrated hose nozzle,
two laboratory valves, a cross handle design, and vacuum breaker. The fitting shall also meet ANSI A112.18.1 standard. Fitting
shall be American Standard Model # 7272.____.___.
© 2006 American Standard Inc.
L183
LABORATORY FAUCETS
8" WIDESPREAD DECK MOUNTED FITTINGS
MODEL NUMBER:
7272.820 Deck mounted fitting, 8" centers
GENERAL DESCRIPTION:
Deck mount laboratory fitting, 8" centers. Rigid/swing
gooseneck spout. Operates in 1-1/4 turns. Solid brass
construction and is repairable.
PRODUCT FEATURES:
•
•
•
•
•
Rigid/swing gooseneck spout
Removable serrated hose nozzle
Cross handle design with hot and cold water index buttons
Slow compression cartridge
High-gloss polished chrome finish
12-3/8"
(314mm)
2-1/2"
(64mm)
3˚
5-7/8"
(149mm)
DIA.
(22mm)
5-3/8"
(137mm)
2-1/4"
[57mm]
7/8"
2-1/4" DIA.
(57mm)
4"
(102mm)
8"
(203mm)
2-3/8"
(60mm)
1-3/8" (35mm)
MAX WARE
THICKNESS
1/2" NPSM COUPLING
NUT FOR 3/8" OR 1/2"
FLEXIBLE RISER.
CODES AND STANDARDS:
These products meet or exceed the following coded standards:
ASME A112.18.1
CSA B125
SUGGESTED SPECIFICATION:
Laboratory faucet shall feature a brass body construction with slow compression cartridge, a removable serrated hose nozzle,
rigid/swing gooseneck spout, 8" widespread, and two cross handle design with index buttons. The fitting shall also meet ANSI
A112.18.1 standard. Fitting shall be American Standard Model # 7272.____.___.
© 2006 American Standard Inc.
L185
LABORATORY FAUCETS
8" WIDESPREAD DECK MOUNTED FITTINGS
MODEL NUMBER:
7272.821 Deck mounted fitting, 8" centers with
vacuum breaker
GENERAL DESCRIPTION:
Deck mount laboratory fitting, 8" centers with vacuum
breaker. Rigid/swing vacuum breaker gooseneck spout.
Operates in 1-1/4 turns. Solid brass construction and is
repairable.
PRODUCT FEATURES:
•
•
•
•
•
Rigid/swing vacuum breaker gooseneck spout
Removable serrated hose nozzle
Cross handle design with hot and cold water index buttons
Slow compression cartridge
High-gloss polished chrome finish
12-1/8"
(308mm)
2-1/2"
(64mm)
3˚
5-7/8"
(149mm)
7/8"
(22mm)
2-1/4" DIA.
(57mm)
4"
(102mm)
8"
(203mm)
1/2" NPSM COUPLING
NUT FOR 3/8" OR 1/2"
FLEXIBLE RISER.
6"
(152mm)
1-3/8" (35mm)
MAX WARE
THICKNESS
2-1/4"
(57mm)
2-3/8"
(60mm)
CODES AND STANDARDS:
These products meet or exceed the following coded standards:
ASME A112.18.1
CSA B125
SUGGESTED SPECIFICATION:
Laboratory faucet shall feature a brass body construction with slow compression cartridge, a removable serrated hose nozzle,
vacuum breaker, rigid/swing vacuum breaker gooseneck spout, 8" widespread, and two cross handles with index buttons. The
fitting shall also meet ANSI A112.18.1 standard. Fitting shall be American Standard Model # 7272.____.___.
© 2006 American Standard Inc.
L187
LABORATORY FAUCETS
ADJUSTABLE CENTERS WALL MOUNT FITTINGS
MODEL NUMBER:
7272.850 Adjustable 7-1/4" to 8-3/4" centers
GENERAL DESCRIPTION:
Wall mount laboratory fitting, adjustable 7-1/4" to 8-3/4"
centers. Rigid/swing gooseneck spout. Operates in 1-1/4
turns. Solid brass construction and is repairable.
PRODUCT FEATURES:
•
•
•
•
•
•
•
Removable serrated hose nozzle
Cross handle design with hot and cold water index buttons
Slow compression cartridge
1/2" NPT x 3" inlet shank
High-gloss polished chrome finish
Adjustable supply arms
Rigid/swing gooseneck spout
10-1/8"
(257mm)
3-5/8"
(92mm)
4"
(102mm)
8"
(203mm)
2-5/16"
(59mm)
DIA. FLANGE
3/8"
(10mm)
OFFSET
3˚
5-3/8"
(137mm)
3-1/8"
(79mm)
1/2" NPT FEMALE
THREAD INLETS
CODES AND STANDARDS:
These products meet or exceed the following coded standards:
ASME A112.18.1
CSA B125
SUGGESTED SPECIFICATION:
Laboratory faucet shall feature a brass body construction with slow compression cartridge, a removable serrated hose nozzle,
rigid/swing gooseneck spout, adjustable supply arms between 7-1/4" to 8-3/4" centers, and two cross handles design with index
buttons. The fitting shall also meet ANSI A112.18.1 standard. Fitting shall be American Standard Model # 7272.____.___.
© 2006 American Standard Inc.
L189
LABORATORY FAUCETS
ADJUSTABLE CENTERS WALL MOUNT FITTINGS
MODEL NUMBER:
7272.851 Adjustable 7-1/4" to 8-3/4" centers with
vacuum breaker
GENERAL DESCRIPTION:
Wall mount laboratory fitting, adjustable 7-1/4" to 8-3/4"
centers. Rigid/swing vacuum breaker gooseneck spout.
Operates in 1-1/4 turns. Solid brass construction and is
repairable.
PRODUCT FEATURES:
•
•
•
•
•
•
•
Removable serrated hose nozzle
Cross handle design with hot and cold water index buttons
Slow compression cartridge
1/2" NPT x 3" inlet shank
High-gloss polished chrome finish
Adjustable supply arms
Rigid/swing vacuum breaker gooseneck spout
10"
(254mm)
3/8"
(10mm)
OFFSET
3˚
6"
(152mm)
3-5/8"
(92mm)
4"
(102mm)
8"
(203mm)
2-5/16" (59mm)
DIA. FLANGE
3-1/8"
(79mm)
1/2" NPT FEMALE
THREAD INLETS
CODES AND STANDARDS:
These products meet or exceed the following coded standards:
ASME A112.18.1
CSA B125
SUGGESTED SPECIFICATION:
Laboratory faucet shall feature a brass body construction with slow compression cartridge, a removable serrated hose nozzle,
adjustable supply arms between 7-1/4" to 8-3/4" centers, rigid/swing vacuum breaker gooseneck spout, and two cross handles
design index buttons. The fitting shall also meet ANSI A112.18.1 standard. Fitting shall be American Standard Model #
7272.____.___.
© 2006 American Standard Inc.
L191

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project