TM-2040 GE / TMC-2040 GE

Add to my manuals
2 Pages

advertisement

TM-2040 GE / TMC-2040 GE | Manualzz

TM-2040 GE / TMC-2040 GE

Progressive Scan CCD

1600 x 1200 34 FPS GigE Vision

1” progressive scan IT CCD (Kodak KAI-2020)

1600 x 1200 pixels @ 34 fps dual-tap mode

7.4 µm square pixels

SW selectable single-tap mode @ 17 fps

12-bit A/D (linear) or 8-bit/10-bit with look-up table (LUT)

GigE Vision Ethernet output and analog output

100 m with standard CAT 5E or CAT 6 cable

Image center partial scan (600, 300, 150 lines)

User-programmable variable partial scan

2X binning (H & V independently selectable)

Full-frame shutter to 1/32,000 sec.

Asynchronous reset, no-delay, pulse width control shutter

Defective pixel compensation

PIV (particle imaging velocimetry) mode

Extensive software developer’s kit (SDK)

Monochrome or color www.jai.com

Specifications for TM-2040GE/TMC-2040GE

Specifications

GUI Interface

TM-2040GE/TMC-2040GE

Sensor

Active area

Active pixels

Cell size

Readout modes A

B

C

D

U

Synchronization

1” progressive scan interline transfer CCD

11.8mm x 8.8mm

1600 (H) x 1200 (V)

7.4 μm x 7.4 μm

1600 (H) x 1200 (V) @ 34 Hz

1600 (H) x 600 (V) @ 58 Hz (partial scan)

1600 (H) x 300 (V) @ 90 Hz (partial scan)

1600 (H) x 150 (V) @ 122 Hz (partial scan) user-programmable partial scan

Internal/External auto switch

HD/VD, 4.0 Vp-p impedance 4.7K Ω

VD= 34 Hz ± 2%, non-interlace

HD= 41.7 kHz ± 2%

Pixel clock

S/N ratio

Sensitivity Mono

Color

Video output Analog

Digital

40.00 MHz

>58 dB

0.4 lux f=1.4 (no shutter) @ 34 fps,

2.4 lux f=1.4 (no shutter) @ 34 fps,

Pixel sensitivity: 30 μV/e-

1.0 Vp-p, 75 Ω

Gigabit Ethernet (8-bit/10-bit/12-bit)

Color ( RMC/TMC-2040 only ) Raw Bayer output for host-based interpolation

Gamma Programmable LUT (Gamma 1.0 std)

Shutter speed ( programmable

) 1/34 to 1/32,000 sec in increments of 24 μs

Lens mount C, F, M42 mount (use >1” format lenses)

Power

Operating temperature

12V DC ± 10%, 800 mA (typical at 25° C)

-10° C to 50° C

Vibration

Shock

Dimensions (H x W x L)

Weight

7 Grms (10 Hz to 2000 Hz) Random

70 G, 11 ms, half-sine

51 mm x 51 mm x 85 mm

216 g (without tripod)

A user-friendly graphical user interface (GUI), provided as part of the camera’s extensive software development kit (SDK), allows users to control various camera functions, including:

Shutter control for manual async. and pulse width control

Gain control

A/D reference voltage control

Save settings

Load settings

Report settings

LUT setting and graphic display

Scanning mode selection and Option selections

Spectral Response

TM-2040GE (monochrome)

0.6

0.5

0.4

0.3

0.2

0.1

0.0

200 300 400 500 600 700 800 900 1000 1100

Wavelength (nm)

TMC-2040GE (color)

0.45

0.40

0.35

0.30

0.25

0.20

0.15

0.10

0.05

0.00

400 500 600 700 800 900 1000

Wavelength (nm)

Dimensions

4X M3 X – 6.0 [0.23]

Front view

Connector Pin-out

3

2

11

1

10

9

12

4

5

8

6

7

12-Pin Connector

1 GND (power) 7

2 +12V 8

VD in

Strobe out

3 GND (analog) 9

4 Video out 10

HD in

Reserved

5 GND (digital) 11 Reserved

6 VINIT in 12 Reserved

Side view

1”– 32

40.8

[1.60]

40.8

[1.60]

4X M3 X – 6.0 [0.23]

40.8

[1.60]

40.8

[1.60]

25.6

[1.01]

50.8 [2.00]

50.8 [2.00]

[1.01]

40.8 [1.60]

21.6

[0.85]

25.6

[1.01]

18.0

[0.71]

– 6.5 [0.26]

[0.85]

8X M3

– 6.5 [0.26]

25.4 [1.00]

1”– 32

25.4 [1.00]

25.4 [1.00]

50.8 [2.00]

21.6

[0.85]

21.6

[0.85]

1”– 32

1”– 32

25.4 [1.00]

25.4 [1.00]

25.4 [1.00]

50.8

[2.00]

50.8

[2.00]

7.0 [0.28]

11.0 [0.43]

11.0 [0.43]

1/4–20

2X M6

1/4–20

1/4–20

50.8

[2.00]

Rear view

2X M6

50.8

[2.00]

Gigabit Ethernet

Gigabit Ethernet

7.0 [0.28]

17.7 [0.70]

IMAGE AREA

7.0 [0.28]

17.7 [0.70]

EFFECTIVE

85.2 [3.35]

Gigabit Ethernet

25.4 [1.00]

7.0 [0.28]

17.7 [0.70]

93.9 [3.69]

22.0 [0.87]

93.9 [3.69]

EFFECTIVE

IMAGE AREA

EFFECTIVE

IMAGE AREA

85.2 [3.35]

1/4–20

22.0 [0.87]

11.0 [0.43]

2X M6

11.0 [0.43]

GigE

85.2 [3.35]

POWER

GigE POWER

GigE POWER

18.0

[0.71]

18.0

[0.71]

GigE POWER

The SDK also provides functions for controlling the grabbing of images, and configuring local I/Os, by means of an integrated API and a set of powerful

C++ classes. Changes in the camera’s acquisition modes automatically update the API for easy image acquisition. CPU usage is only a few percent, thanks to the TCP/IP offload engine.

Software available for download at www.jai.com

Ordering Information

Camera

Lead Processing

RoHS Compliant

Optional Functions

Internal IR Filter Added

Optical Filter Removal

Glassless CCD Imager

Ultraviolet Imager

TM-2040GE (mono), TMC-2040GE (color)

RM-2040GE (mono), RMC-2040GE (color)

OP3-1

OP3-2 (color only)

OP21

OP21-UV (monochrome only)

F mount

M42 mount

OP65-6

OP65-7

M42 mount, 10mm back focus OP65-8

Optional Accessories (must be ordered separately)

Power Supply/2m cable

Power Supply

PD-12UUP/12P-02S

PD-12UUP series ( includes power connector )

Europe, Middle East & Africa

Phone +45 4457 8888

Fax +45 4491 3252

Asia Pacific

Phone +81 45 440 0154

Fax +81 45 440 0166

Visit our web site on www.jai.com

Americas

Phone (Toll-Free) 1 800 445 5444

Phone +1 408 383 0300

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement