SuperAP 570 1 Watt Rugged Access Point/Bridge

SuperAP   570 1 Watt Rugged Access Point/Bridge
SuperAP 570 1 Watt
Rugged Access Point/Bridge
54Mbps High Powered Wi-Fi with Tamper/Weather Resistant Case
ValuePoint Networks high speed (54Mbps) high power
802.11b/g compliant SuperAP 570g is designed especially
for outdoor Wi-Fi deployments where large coverage is
required. It is a Rugged Access Point, with 1 Watt (30
dBi) transmit output and industry standard Power over
Ethernet. Ideal for outdoor applications where industrial
hardened equipment is required, we use a NEMA style
enclosure, lockable to any flat surface. The SuperAP 570g
can act as an Access Point, Bridge repeater, or
combination Access Point and Bridge repeater. Pricing for
the 570g is more cost effective than ever before,
dramatically lowering your infrastructure costs, and
increasing your Return on Investment.
Hardware Features
The SuperAP 570g comes with an industry standard female N-bulkhead connector so you
can use a wide assortment of the best antennas available. Your backbone Ethernet
cable connects to the AP through a moisture-proof gland and the entire unit is sealed with
a heavy-duty gasket. The unit is entirely sealed from the harshest elements outdoors,
tampering indoors, and is suitable for all applications.
The 570g runs on higher power 48Volt 1 AMP Power over Ethernet provided by
ValuePoint’s POE-1 injector. It uses external replaceable antennas, enabling it to be used
in a wide variety of special applications where the wireless output needs to be tailored for
the environment. Special high-gain, omni-directional, directional, or Yagi antennas can be
attached to the unit using standard N-type cabling.
The 570g also has high receive sensitivity up to –102 dBm enabling extremely long point
to point and client to AP applications.
User Authentication
Secure authentication based on industry standards
The 570g incorporates 802.1x/Radius–based authentication features that interoperate
with a back-office Radius server to provide authentication of each user. Radius-based
authentication means a SuperAP 510g is compatible with a wide variety of shared usage
and public access applications. In addition, the 570g can authenticate users based on
their MAC address if desired.
2005 ValuePoint Networks, Inc. All Rights Reserved
Security and Management
Security and Management
Highly secure and manageable
In addition to Radius-based and MAC-based authentication in the Advanced Version, the
570g supports the 64-bit and 128-bit Wireless Encryption Protocol (WEP), Wireless
Protected Access (WPA), Static WPA-PSK, and disabling of SSID broadcast. Specific
packet filtering by Ethernet type, protocol, or port is also supported.
The 570g is easy for administrators to setup through Web-based management, or our
Windows-based network manager. Additionally, management can be done via SNMP v1,
v2c, 802.1x and 802.1d MIBs. It is UPnP-enabled and supports remote firmware
upgrades via TFTP or HTTP file-based upload.
Extended Network Range
Repeater functionality
The 570g is able to operate as a repeater in addition to an access point, allowing it to
communicate with other compatible AP/routers to form a Wireless Distribution System.
This greatly extends the reach of the wireless network. Using directional antennas and
the unit’s powerful 1W output, a range of 25 miles line of sight is achievable. Up to six
WDS links can be established from a single unit.
The 570g is fully compatible with the Wi-Fi standard, ensures the usability with any Wi-Fi
compatible wireless equipped device. Wi-Fi is the fastest growing standard for Internet
access and is supported on a vast number of PCs today.
About ValuePoint Networks
ValuePoint is a manufacturer of Wi-Fi products for service providers, small and medium
sized businesses, and the shared access market. ValuePoint’s products are designed for
the unique needs of Service Providers, Wireless ISPs, Billing Providers, and Venue
Operators in the burgeoning mobile access space. This includes Airports, Hotels, MultiTenant Units, Multi-Dwelling Units, Pay Telephones, and Storefronts.
For more
information on ValuePoint’s Rugged Access Points and Wireless Gateways, please visit
us online.
2005 ValuePoint Networks, Inc. All Rights Reserved
Technical Specifications
IEEE 802.11b/g
Frequency band: 2.4-2.4835GHz
Modulation Techniques: DSSS (OFDM, CCK, DQPSK,DBPSK)
Data Rates: OFDM@54Mbps, CCK@11/5.5Mbps, QPSK@2Mbps and DBSK@1Mbps
Media Access Protocol: CSMA/CA with ACK, RTS/CTS
Access Point Range: 4 km (2.5 miles) line of sight (client dependent)
WDS Repeater Range: 40 km (25 miles) line of sight (antenna dependent)
1 Watt transmit power at the N-connector
OFDM Sensitivity: -80dBm @54Mbps ~ -96dBm@12Mbps
CCK Sensitivity: -92dBm @11Mbps ~ -102dBm@1Mbps
IEEE 802.3u 10/100BaseTX for Ethernet LAN
DHCP Client and Server
Static DHCP mappings
802.1d Bridging functionality
Up to 6 WDS Repeater links
802.1x RADIUS based security
MAC based access control
64/128 bit RC4 WEP
Web-based management
Wireless Network Manager Application for Windows
System logging
SNMP v1/v2
MIB II with traps, 802.1x, 802.1d MIBs
1 10/100M Ethernet LAN port
Works with any Wi-Fi certified interfaces
Operating Environment
Operating Temperature: -20 to 70 C
Humidity: Max. 95% non-condensing
48 Volt 1 AMP Power Over Ethernet (Order model POE-1)
Regulatory Approvals
FCC part 15 Class B, VCCI Class B, CE Mark, UL
Advanced Features included
• AP load balancing
• Wireless Client Isolation
• Association Control
One year parts and labor
2005 ValuePoint Networks, Inc. All Rights Reserved
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF