LUMEL N13 Power Network Parameter Meter Service manual

Below you will find brief information for Power Network Parameter Meter N13. The N13 Power Network Parameter Meter is a digital instrument designed to measure all basic parameters in three-phase three-wire or three-phase four-wire, balanced or unbalanced electrical power networks, with the simultaneous display of measured quantities and the digital transmission of their values and their conversion into an analogue standard signal. It can be employed in data acquisition networks or can be used as a single meter instead of many different meters used till now: ammeters, voltmeters, wattmeters, warmeters, frequency meters, phase meters and others.

PDF Download
Document
Power Network Parameter Meter N13 Service Manual | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • Measures all basic parameters in 3-phase networks
  • Simultaneous display of measured quantities
  • Digital transmission of values
  • Analogue standard signal conversion
  • RS-485 interface for communication
  • Relay output for exceeding states
  • Programmable analogue output
  • Wide measuring ranges
  • High accuracy
  • Easy to use

Frequently asked questions

The N13 is a digital instrument designed to measure all basic parameters in three-phase electrical power networks. It can be used for data acquisition, control, and optimization of power electronic devices, systems, and industrial installations.

The N13 measures various quantities such as voltage, current, active and reactive power, energy, power factor, frequency, and harmonics. It offers a digital interface for data transmission, a programmable analogue output, and a relay output for exceeding states.

The N13 communicates with a computer through the RS-485 interface using the MODBUS protocol. A converter like PD10 can be used to connect the meter to a PC.

The N13 has a wide range of input and output capabilities. Refer to the technical data section of the service manual for specific information.

The N13 can be programmed through its frontal panel interface. Refer to the programming section of the service manual for detailed instructions.
Preparing document for printing…
0%