Sage Sage 100 Fund Accounting Installation Guide
Mainos
Mainos
Installation Guide
© 2012 Sage Software, Inc. All rights reserved.
Helping Those Who Do Good Things Do Them Even Better®
Sage, the Sage logo, and the Sage product and service names mentioned herein are registered trademarks or trademarks of Sage Software, Inc., or its affiliated entities. The Visual Analyzer module is powered by QlikView™, a trademark of QlikTech, Inc. All other products are the property of their respective owners. This document contains proprietary information, which is protected by copyright. No part of this document may be photocopied, reproduced, adapted, or transmitted in any form or by any means without the prior written consent of Sage Software, Inc.
Your use of this document and the Sage product(s) described herein is governed by the terms and conditions of the Sage End User License Agreement (“EULA”) or other agreement that is provided with or included in the Sage product. Nothing in this document supplements, modifies or amends those terms and conditions. Except as expressly stated in those terms and conditions, the information in this document is provided by Sage “AS IS” and Sage disclaims all express, implied or statutory warranties of any kind, including but not limited to the warranties of merchantability, fitness for a particular purpose or of non-infringement. No implied license is granted to you under any Sage intellectual property or trade secret right. Sage reserves the right to revise, supplement or remove information in this document at any time without notice to you or others.
Software version 2013.x
Contents
Chapter 1: Getting Started
Chapter 2: New User - Server Install
Chapter 3: New User - Workstation Install
Chapter 4: Existing User - Upgrading
Chapter 5: Existing User - Server Install
Installation iii
Contents
Chapter 6: Existing User - Workstation Install
Chapter 7: Uninstalling Sage 100 Fund Accounting
Chapter 8: Help Documentation
Chapter 9: Supplemental Maintenance
iv Sage 100 Fund Accounting
Chapter 1:
Getting Started
This guide includes combined instructions for both New and Upgrade installations of Sage 100
Fund Accounting.
New Installation Scenarios
• You are installing a one-user version of Sage 100 Fund Accounting (programs and database) on a single computer. The computer may or may not be part of a network, but the programs and database reside on the local hard drive of this computer. In this scenario, there are no network files involved, and no other computers have access to the system/database.
• You have a network comprised of a server machine with one or more local computers attached, and you want to install the database on the server machine so that other users can access it from their local computers (either one at a time or simultaneously depending on your license).
• You have a network comprised of two or more local computers that can access each other's shared drives, and you want to install the database on one computer's shared drive so that other users can access it from their local computers (either one at a time or simultaneously depending on your license).
• You have a network and want to install the database on a server machine for backup and security purposes, even though only one user accesses it from a single local computer.
• You are installing the Sage 100 Fund Accounting programs and database in a virtual environment. You must use a virtual service client, such as VMWare's Infrastructure Client
Console, instead of a Remote Desktop Connection.
Upgrade Installation Scenarios
• You are upgrading an existing Stand Alone or Network installation. Your installation will upgrade if you have a previous version installed.
• You are upgrading the Sage 100 Fund Accounting programs and database in a virtual environment. You must use a virtual service client, such as VMWare's Infrastructure Client
Console, instead of a Remote Desktop Connection.
• For specific information regarding existing users, see
Chapter 4: Existing User - Upgrading
,
Chapter 5: Existing User - Server Install
, and Chapter 6: Existing User - Workstation Install .
Chapter Overview
This guide takes you through the Sage 100 Fund Accounting installation, which is comprised of two components: Sage 100 Fund Accounting Server and Sage 100 Fund Accounting Workstation.
You will learn specific information about each of these components and how to install/upgrade them. The chapters in this guide are outlined as follows:
- This chapter outlines important information and procedures that need to be performed before running the installation programs. Read this chapter before installing.
Installation 1
Getting Started
New User - Server Install - Includes specific instructions on how to install and run Sage
100 Fund Accounting on a stand-alone machine or network.
New User - Workstation Install
- Describes how to perform a workstation install.
- Includes useful procedures for existing users who are upgrading from a previous version of Sage 100 Fund Accounting.
Existing User - Server Install
- Includes specific instructions on how to upgrade and run
Sage 100 Fund Accounting on a stand-alone machine or network.
Existing User - Workstation Install - Describes how to perform a workstation upgrade
install.
Chapter 7:
Sample Organization Install - Includes specific instructions on how to install the sample databases.
Uninstalling Sage 100 Fund Accounting
- Outlines how to uninstall Sage 100 Fund
Accounting.
- Provides instructions on how to access the Sage 100 Fund
Accounting documentation.
Supplemental Maintenance - Provides instructions on how to back up, restore, and
compress an organization database.
Before You Begin
For optimum results, perform the following “housekeeping” tasks on the workstation and server before running the installation program:
1.
Verify that your current environment meets the new system requirements. You can view the system requirements at http://na.sage.com/sage-100-fund-accounting/products/systemrequirements .
IMPORTANT:
Our System Requirements have changed; MSDE and SQL Server 2000 editions are
no longer supported. Please verify that you are using an acceptable SQL Server.
2.
Shut down all applications that are currently running, and restart the computer.
3.
After Windows has restarted, shut down any applications that have opened at startup.
Additionally, you may need to disable some applications, such as Norton AntiVirus©.
– Press CTRL-ALT-DELETE to open the Windows Security form. Click the Task Manager button to open the Windows Task Manager form. On the Applications tab, select each program listed in the form, and click End Task.
Note:
The above processes only shut down the applications for the purposes of the installation. The next time the computer is rebooted, the programs and all Windows services are restored.
2 Sage 100 Fund Accounting
Getting Started
4.
If the Windows Firewall is turned on, you must configure exceptions in the firewall for SQL
Server or the client computer(s) will not be able to connect. For specific instructions on setting up the exceptions, see Knowledgebase article 303029 in the Sage Customer Portal. If you are new to the Sage Customer Portal or to the Knowledgebase, visit the Customer Support
Resources page for more information.
Note:
Windows Firewall is turned on by default with Windows 2008 Server.
5.
Delete all files in the local TEMP directory, such as C:\Documents and Settings\<Current
User>\Local Settings\Temp. Since the computer has just rebooted and any unnecessary applications are closed, there should be few files in the Temp directory. Nevertheless, delete any files or folders that remain there.
6.
If you are running Sage 100 Fund Accounting on a laptop, set your hibernation settings to
Never (Start>Settings>Control Panel>Power Options>Power Schemes tab). Otherwise, when the computer times out, your seat will become inactive.
7.
Before you begin the server install:
– The user logged on to the server machine must be a member of the Local Administrators group.
– To install or upgrade Sage 100 Fund Accounting in a on a virtual environment, you must use a virtual service client, such as VMWare's Infrastructure Client Console, instead of a
Remote Desktop Connection.
– For specific instructions for SQL Server 2008 Standard Edition configuration, see
Knowledgebase article 309148 in the Sage Customer Portal. It details how to check an existing instance of SQL Server 2008 Standard Edition to ensure proper functionality before installing Sage 100 Fund Accounting. Also, Knowledgebase article 205743 offers
SQL Server 2005 Standard Edition configuration instructions. If you are new to the Sage
Customer Portal or to the Knowledgebase, visit the Customer Support Resources page for more information.
– SQL Server 2008 and Windows 7 Users: Be sure to start the SQL Server Browser and consider setting the Start Mode to Automatic to ensure that the workstation can access the
Sage 100 Fund Accounting system database.
8.
Before you begin the workstation install, you must ensure the following:
– The user logged on to the server machine must be a member of the Local Administrators group.
– Windows XP Users: Each workstation has at the very least write access to the “All Users” and <user name> folders--<local drive letter:>\Documents and Settings\All Users and
<user name>. Also verify that each user that uses Aatrix® (for 1099s, W-2s, 990s, etc.) has
“Full Control” rights (right-click on folder>Properties>Security tab).
– Vista Users: Each workstation has at the very least read-write access to the
“ProgramData” folder--<local drive letter:>\ProgramData. Also verify that each user that uses Aatrix® (for 1099s, W-2s, 990s, etc.) has rights.
– Windows 7 Users: Each workstation has at the very least read-write access to the
“ProgramData” folder--<local drive letter:>\ProgramData.
– Sage 100 Fund Accounting cannot install successfully without these folders and rights.
9.
Close any open windows.
Installation 3
Getting Started
After performing these steps, you are ready to run the Installation program.
The Getting Started guide assists in setting up the chart of accounts once the system is successfully installed, and Help is always available at the click of a button in the context-sensitive online help system.
Quick Install Overview
This is an overview of the installation process for all Sage 100 Fund Accounting components.
Although there is only one executable (SETUP.EXE) for this install, the system actually runs separate wizards for each component.
Note:
To install Sage 100 Fund Accounting in a virtual environment, you must use a virtual service client, such as VMWare's Infrastructure Client Console, instead of a Remote Desktop
Connection.
Log on to your server as a user with local administrator rights and download the Sage 100 Fund
Accounting software to the computer functioning as the Sage 100 Fund Accounting Server. The system automatically runs SETUP.EXE upon completion of the download.
The Sage 100 Fund Accounting Installation Startup displays. After reviewing the provided documentation, select the Begin Installation Process option.
4 Sage 100 Fund Accounting
Getting Started
Step 1: Verify System Requirements
Verify that your current system environment meets the Sage 100 Fund Accounting system requirements. You can view the system requirements at http://na.sage.com/sage-100-fundaccounting/products/system-requirements .
IMPORTANT:
Our System Requirements have changed; MSDE and SQL Server 2000 editions are
no longer supported. Please verify that you are using an acceptable SQL Server.
Step 2: SQL Server Express Installation
You must have SQL Server installed on your Server machine. If you plan to use an existing
Microsoft SQL Server install, please launch the Sage 100 Fund Accounting Install from that machine.
If not, click the SQL Server Express Installation link to open a browser to the Microsoft Download
Center website. There you can download Microsoft SQL Server 2008 R2 Express Edition with
Advanced Services. Select x86 or x64 and click Download to begin the installation. Also, click the
Here to access instuctions for installing the SQL 2008 R2 Express via an FTP directory.
Note:
Installing these requirements later will require the server to be restarted.
Step 3: Install/Upgrade Sage 100 Fund Accounting Server
1.
Select the Begin Installation Process option. Be sure you are logged in as a user who has local administrator rights to perform the install.
Note:
To install Sage 100 Fund Accounting in a virtual environment, you must use a virtual service client, such as VMWare's Infrastructure Client Console, instead of a Remote Desktop
Connection.
2.
The Sage 100 Fund Accounting Server setup Install Wizard displays. Click Next.
–
– Existing Users: To upgrade to a local or network server, see
Chapter 5:Existing User - Server Install (on page 31).
3.
Review the End User License Agreement and select the “I accept the terms in the license agreement” option. Click Next.
4.
Enter the serial number and activation code which was provided by Sage and click Next.
5.
Accept the default MIP Share destination folder (recommended), or use the Change button to navigate to a different location. Click Next.
6.
Select the database server that you are installing to by using the drop-down arrow, or Browse to the database location. Next, select how you want to connect to this server. If Server authentication is chosen, enter the Login ID and Password. Click Next.
7.
You are now ready to Install Sage 100 Fund Accounting. Click Install to begin, or use the Back button to make changes.
Installation 5
Getting Started
8.
Proceed through the Sage 100 Fund Accounting Server setup. This process may take several minutes. The InstallShield Wizard Completed panel displays. To begin the workstation
install on the server, select the Install Sage 100 Fund Accounting Workstation check box
and click Finish to launch the Workstation install. If you only want to install the server, click
Finish without selecting this check box.
9.
Navigate to the MIP Share directory on the Server and set Full control permissions to
Everyone.
Step 4: Install/Upgrade Sage 100 Fund Accounting Workstation
1.
If you selected the Install Sage 100 Fund Accounting Workstation check box after completing the Server Install, the Sage 100 Fund Accounting Workstation install Welcome panel displays.
If you are installing the workstation only, go to the workstation machine and log on as a user with local administrator rights. Navigate to the MIP Share directory (\\MIP Share) on the
Server, open the Setup sub directory, and select Setup.exe. The Sage 100 Fund Accounting
Workstation install welcome panel displays.
2.
Click Next. Review the End User License Agreement and select the “I accept the terms in the license agreement” option.
3.
Click Next. Accept the default MIP destination folder (recommended), or use the Change button to navigate to a different location.
4.
Click Next. Select the program features to be installed by using the drop-down arrows.
5.
Click Next. The Install Wizard is ready to install the program. Click Install to begin the installation, or click Back to make changes to your installation settings.
6.
Proceed through the Sage 100 Fund Accounting Workstation setup. This process may take several minutes. The InstallShield Wizard Completed panel displays. Click Continue to complete the Workstation Install.
7.
Additional installs launch after you click Continue to complete the Workstation Install. These include Tax Forms and eFiling by Aatrix, Qlikview, Sage Advisor Update, and SQL Backward
Compatibility. Allow any additional installs to complete, and then click OK on the “Your install completed successfully” form.
8.
Click the Exit button on the Sage 100 Fund Accounting Installation Startup form.
Note:
This workstation install needs to be applied to each workstation.
System Requirements
In order to take advantage of the latest security and performance enhancements, please note that this release of Sage 100 Fund Accounting has phased out backward compatibility for several system software components. For specific instructions on the technology improvements, migration information, as well as links to resources that assist qualified nonprofits in obtaining discounted operating system and database engine software, see Knowledgebase article 306083 in the Sage Customer Portal. If you are new to the Sage Customer Portal or to the Knowledgebase, visit the Customer Support Resources page for more information.
You should meet or exceed the system requirements found at http://na.sage.com/sage-100-fundaccounting/products/system-requirements.
6 Sage 100 Fund Accounting
Chapter 2:
New User - Server Install
This chapter describes the installation process for a stand-alone, virtual, or network server. You must select a database engine prior to installing the Sage 100 Fund Accounting Server. Once you
have completed these steps, follow the instructions in “ Chapter 3: New User - Workstation Install “
to install the workstation.
This chapter explains the following:
•
•
•
•
•
Sage 100 Fund Accounting Server Install
•
Granting Access to the MIP Share Directory
Server Install Overview
The Server install is comprised of the following:
• SQL Server Express- Download Microsoft SQL Server 2008 R2 Express with Advanced
Services from the link on this CD or use an already installed version of Microsoft SQL Server
2005 Express Edition with Advanced Services, SQL Server 2005 (Full Version), or SQL Server
2008 (Full Version).
• Sage 100 Fund Accounting Server - The Sage 100 Fund Accounting Server installation creates the MIP Share directory. We recommend accepting the default path when installing the server component.
The necessary files related to the
Sage 100 Fund Accounting Server Install are copied to the server.
To install the Microsoft SQL Server 2008 R2 Express Edition with Advanced Services from the
Microsoft website, click the SQL Server Express Installation link that displays on the startup screen when you insert the Sage 100 Fund Accounting installation CD.
Installation 7
New User - Server Install
Local Server Configuration
In order to successfully install and run Sage 100 Fund Accounting on a stand-alone machine, verify that the File and Printer Sharing Service is installed, the TCP/IP protocol is installed, and the
Server Service is enabled. Then, you need to complete the instructions in this chapter to ensure that the Sage 100 Fund Accounting Server is installed correctly. Once you have completed these
steps, follow the instructions in “ Chapter 3: New User - Workstation Install “ to install the
workstation.
Note:
If you do not have a network adapter driver installed, you cannot continue the Sage 100
Fund Accounting install. You need to install the Microsoft Loopback Adapter first (follow the instructions below).
To Activate File and Printer Sharing Service:
1.
Right-click Network and then select Properties. The Network and Sharing Center displays.
2.
Under Sharing and Discovery, verify that File Sharing and Printer sharing are listed as On.
3.
If Off displays, expand the down arrow and select the Turn on option.
To Enable the Server Service:
1.
Go to Start>Settings>Control Panel>Administrative Tools>Services.
2.
Double-click the Server Manager.
3.
Expand Configuration, and click Services.
4.
Make sure that the Startup type is Automatic and the Server Status is Started. If those settings are not in place, implement them, and then click OK.
To Install TCP/IP:
1.
Right-click Network and then select Properties.
2.
Click View Status for Local Area Connection and then click Properties.
3.
If Internet Protocol Version 4 or 6 (TCP/IPv4/v6) is not selected in the list, check the box and click the Install button. If it is listed, click OK and skip to step 6.
4.
Select Protocol, and then click Add.
5.
Select Internet Protocol (TCP/IP), and then click OK.
6.
Click Close to close the Local Area Connection Status window.
Note:
If you are actually using TCP/IP to connect to your network, make sure that it is configured properly.
Directory Structure Overview
The Sage 100 Fund Accounting Server executable (SETUP.EXE) creates the MIP Share directory.
We recommend accepting the default path when installing the server component.
8 Sage 100 Fund Accounting
New User - Server Install
Data Files and Directory Structure
When installing the Sage 100 Fund Accounting Server, the data files and workstation share files are stored on the machine that is functioning as the server. The workstation installation stores the
Sage 100 Fund Accounting system and program files on each client machine.
After the server installation, the following directory structure exists on the drive and in the directory that was specified during installation.
MIP Share Directory
This directory contains the following folders:
• AATRIX contains the drafts and historical forms created by Aatrix, for each federal tax ID in the Companies folder.
• CONSOLIDATION FILES contains CONTEMP.TXT, which will be altered when consolidating data.
• DATA contains a copy of the NPSSQLSYS.NPS and MIPT.NPS files. These are the system and sample database files that come with the system.
• DDEPOSIT contains ACH.TXT, which will be altered when using the Direct Deposit module.
• EPAYAP contains ACHAP.TXT, which will be altered when using the Electronic Funds
Transfer for A/P module.
• FORMATS contain the files needed to print custom forms in the system. This is where you should store custom formats created by the Forms Designer module.
• GRANTADMIN contains scanned images of sample grant documentation for the Grant
Administration module.
• IMPORT includes sample DEF and data files that can be used with the Data Import/Export module.
• MIP DOCUMENTATION includes the product guides available in PDF format.
Installation 9
New User - Server Install
• {ORGANIZATION DATABASE NAME} contains all folders for attachments. This folder is not actually created until the attachments feature is activated in the system
(Administration>Organization>Attachments>Set Up Locations).
• REPORT PDF FILES contains *.PDF files saved while using the Print to PDF feature.
• SETUP contains the files necessary to run the Sage 100 Fund Accounting Workstation installation. Each of the client machines will need to access this folder in order to install the
Workstation component. The SETUP.EXE file launches the Sage 100 Fund Accounting
Workstation installation.
• SQLSCRIPTS contains SQL scripts necessary for the system to function properly.
• SUPPORT contains support related folders.
Note:
Do not Password Protect the MIP Share Directory.
SQL Server (Express Download)
Select one of the following that best describes your current setup, and then follow the instructions below for installation:
• SQL Server Express (can be downloaded by following a link) - Microsoft SQL Server 2008
R2 Express Edition with Advanced Services can be downloaded from the SQL Server Express
Installation link on your Sage 100 Fund Accounting Version 2013 Setup tab.
• SQL 2008, SQL 2005, SQL Express (Already installed) - Either the Microsoft SQL Server or
SQL Express have already been installed as your server using the Microsoft website at www.microsoft.com
. Or, SQL Server 2005 or 2008 has already been installed as your server.
The SQL installation creates the \Program Files\Microsoft SQL Server directory. By default, this directory is located on the local drive in which your operating system is installed. Use the browser to change this destination during the installation.
All users have the option to install their own instance of SQL Express or SQL Server. This gives you the ability to administer it according to your practices.
SQL Server Express (Can be downloaded by following a link)
This section describes the installation process for the Microsoft SQL Server 2008 R2 Express
Edition with Advanced Services from the Sage 100 Fund Accounting Version 2013 Setup Tab.
Please carefully read each panel of the wizard during installation.
IMPORTANT:
Before you begin, verify that Microsoft .NET Framework 4.0 or higher is installed
before you try to Install Sage 100 Fund Accounting Server. Go to Start>Settings>Control
Panel>Programs and Features.
10 Sage 100 Fund Accounting
New User - Server Install
1.
Download the Sage 100 Fund Accounting software to the computer functioning as the Sage
100 Fund Accounting Server.
The system automatically launches autorun.exe and the Sage 100 Fund Accounting Setup window displays.
2.
Select SQL Server Express Installation and follow the steps to download SQL Server Express from the Microsoft website. Upon completion, continue the installation process.
Note:
Click the Here link to open a browser to access instuctions for installing the SQL 2008 R2
Express via an FTP directory.
Sage 100 Fund Accounting Server Install
When installing the Sage 100 Fund Accounting Server, a directory is created by default—<Server
Name>:\MIP SHARE. The Sage 100 Fund Accounting Server must be installed before proceeding to the
Sage 100 Fund Accounting Workstation Install on page 22.
Note:
To install Sage 100 Fund Accounting in a virtual environment, you must use a virtual service client, such as VMWare's Infrastructure Client Console, instead of a Remote Desktop
Connection.
Installation 11
New User - Server Install
Please carefully read each panel of the wizard during installation.
1.
Be sure you are logged in as a user who has local administrator rights to perform the install.
2.
If you have not already done so, download the Sage 100 Fund Accounting software to the computer functioning as the Sage 100 Fund Accounting Server.
The system automatically launches autorun.exe and the Sage 100 Fund Accounting Setup window displays.
3.
After reviewing the provided documentation, select the Begin Installation Process option.
The system begins extracting the setup.exe file.
12 Sage 100 Fund Accounting
New User - Server Install
4.
The Sage 100 Fund Accounting Server InstallShield Wizard prepares to install. The Welcome panel displays. Click Next.
5.
The End User License Agreement displays. Select the “I accept the terms in the license agreement” option to continue with the Server Installation.
Installation 13
New User - Server Install
6.
Click Next. The system displays the Product Registration panel. Enter the Serial Number and
Activation Code.
The activation code is case sensitive, so it must be entered exactly as it appears on the notification included with the system. (Store the activation code in a safe place in case your
system needs to be reinstalled.)
Activation
Codes
The activation code is determined by the system’s license. The system uses the activation code to determine which modules you own, how many additional databases you have purchased, and how many concurrent users you will have available. Later, if you decide to add a module or increase your users or databases, you need to enter a new activation code. To enter a new license, use the
Administration>System>Activate License form. To add a module to an existing database, use the
Organization>Add A Module form.
14 Sage 100 Fund Accounting
New User - Server Install
7.
Click Next. Accept the default MIP Share destination folder (recommended), or use the
Change button to navigate to a different location.
Installation 15
New User - Server Install
8.
Click Next. Select the database server that you are installing to by using the drop-down arrow, or Browse to the database location.
Then, select how you want to connect to this server. If Server authentication is chosen, enter the Login ID and Password.
9.
Click Next. You are now ready to Install Sage 100 Fund Accounting.
16 Sage 100 Fund Accounting
10. Click Install to begin, or use the Back button to make changes.
New User - Server Install
11. Proceed through the Sage 100 Fund Accounting Server setup. This process may take several minutes.
Installation 17
New User - Server Install
12. When the installation is complete, the InstallShield Wizard Completed panel displays.
This is the final panel of the server installation. It verifies that the Sage 100 Fund Accounting
Server installed successfully.
– Select the “Install Sage 100 Fund Accounting Workstation” check box, and then click
Finish to continue through the installation program by launching the Sage 100 Fund
Accounting Workstation Installation wizard. For instructions, proceed to
User - Workstation Install on page 21.
– Alternatively, if you do not select the check box, you can install later from the MIP Share
directory. For more information, see “ Granting Access to the MIP Share Directory ” on page 18.
13. Click Finish to complete the install.
14. If applicable, click the Exit button on the Sage 100 Fund Accounting Installation Startup form.
15. Navigate to the MIP Share directory on the Server and set it to share with Full control permissions to Everyone.
Granting Access to the MIP Share Directory
The MIP Share directory (which the Server installation created) contains the files necessary to install Sage 100 Fund Accounting's program files at each workstation. First, the MIP Share directory must be shared so that the workstations will have access to it.
1.
Right-click the MIP Share directory at the server and select Share. . . If you do not see Shared, you will need to log on as a user account that is a member of the Local Administrators or
Power Users group.
2.
On the Sharing tab, click Advanced Sharing. And then select the Share this folder check box.
18 Sage 100 Fund Accounting
New User - Server Install
3.
Click the Permissions button.
4.
Add the desired users/groups.
Note:
If you share to specific users/groups and not the “Everyone” group, you will need to add the “System” account with full rights on the Security tab. If you give the “Everyone” group full rights, then it is not necessary to add “System.”
5.
Grant each user/group Full Control and click OK. A minimum of Change and Read permissions are required. NTFS formatted servers will display a Security tab, in which case you must grant NTFS Permissions. You need to allow System with Full Control. The Security tab will not be available if the drive is formatted using FAT32.
6.
Click OK to close the Advanced Sharing window.
7.
Click the Security tab.
8.
Add the desired users/groups. Typically, the default NTFS permission is all you will need.
However, you can grant the users/groups Full Control access.
9.
Click OK to apply these settings.
10. Click Close to close the MIP Share Properties window.
Note:
You must allow inheritable permissions.
Installation 19
Chapter 3:
New User - Workstation Install
You must have already completed the Sage 100 Fund Accounting Server Install (using Chapter
2) and Granting Access to the MIP Share Directory
, if there is a network.
This chapter describes the installation process for the Sage 100 Fund Accounting Workstation. This installation provides the program files needed to run the system. During the installation, you can choose which shortcut and executable files to install for each system, such as Administration,
Accounting, Payroll, or the entire system. Please carefully read each panel of the wizard during installation.
The necessary files related to this installation are copied to the MIP Share directory of the server during the Sage 100 Fund Accounting Server installation. There is only one executable
(SETUP.EXE) for the workstation install.
Note:
The user logged on to the workstation machine must be a member of the Local
Administrators group.
Ensuring Access to “All Users” Folder
Before you begin the workstation install and you are using Aatrix®, you must ensure that the workstation has access to the “All Users” directory. The following steps should be completed for each workstation running on Windows XP orVista.
1.
Click Start>Run.
2.
Enter the <local drive letter:> in the Open box.
3.
Click OK. The system displays an explore window.
4.
Open the Documents and Settings directory or Vista users open the “Program Data” folder.
5.
Ensure that the “All Users” and <user name> folders are listed. Also verify that each user that uses Aatrix® (for 1099s, W-2s, 990s, etc.) has “Full Control” rights (right-click on folder>Properties>Security tab). Sage 100 Fund Accounting cannot install successfully without these folders and rights. These steps should be completed for each workstation running on
Windows XP.
Installation 21
New User - Workstation Install
Data Files and Directory Structure
When installing the Sage 100 Fund Accounting Workstation, the system and program files are stored on each computer. After the workstation installation, the following directory structure exists on the drive and in the directory that was specified during installation.
MIP Directory
The Sage 100 Fund Accounting Workstation installation creates a MIP directory on the local disk partition with the most space. This directory contains the following folders:
• HELP contains all the files associated with the online help system.
• PROGS contains the executable (*.EXE) files required to run the system. Specific *.DLL files are included in the PROGS directory. Do NOT delete any of these files.
Sage 100 Fund Accounting Workstation Install
This section describes the workstation install. There are two ways to access this install:
• If you selected the Install Sage 100 Fund Accounting Workstation check box at the end of the
Server Install, the system automatically launches the Welcome panel of the Sage 100 Fund
Accounting Workstation install.
• If you are installing the workstation only, go to the workstation machine and log on as a user with local administrator rights. Navigate to the MIP Share directory (\\MIP Share) on the
Server, open the Setup sub directory, and select Setup.exe.
22 Sage 100 Fund Accounting
New User - Workstation Install
1.
The Sage 100 Fund Accounting Workstation install Welcome panel displays.
2.
Click Next. Review the End User License Agreement and select the “I accept the terms in the license agreement” option.
Installation 23
New User - Workstation Install
3.
Click Next. Accept the default MIP destination folder (recommended), or use the Change button to navigate to a different location.
4.
Click Next. The Custom Setup panel displays, which allows you to select the systems you would like to install. By default, the system installs the start menu shortcuts and program files for all systems, even if they are not part of the license.
24 Sage 100 Fund Accounting
New User - Workstation Install
To prevent a system from being installed, ensure that the “X” (Entire feature will be unavailable) is selected. This designation prevents the installation of the program files and the start menu shortcuts for that system. You may find this useful when you need to restrict a user from launching a specific system.
Note:
If you do not install all systems now, but later decide you want to install the program files or start menu shortcuts, you can do so using Start>Settings>Control Panel>Add or
Remove Programs. Select Sage 100 Fund Accounting Workstation and the Change button. The system displays the Welcome panel of the Install wizard. Click Next. Then, on the Program
Maintenance panel, select the Modify option button, followed by the Next button.
5.
Click Next. The Install Wizard is ready to install the program.
6.
Click Install to begin the installation, or click Back to make changes to your installation settings.
Installation 25
New User - Workstation Install
7.
Proceed through the Sage 100 Fund Accounting Workstation setup. This process may take several minutes. The InstallShield Wizard Completed panel displays.
8.
Click Continue to complete the Workstation Install.
9.
Additional installs launch after you click Continue to complete the Workstation Install. These include Tax Forms and eFiling by Aatrix, Qlikview, and SQL Backward Compatibility. Allow any additional installs to complete, and then click OK on the “Your install completed successfully” form.
10. If applicable, click the Exit button on the Sage 100 Fund Accounting Installation Startup form.
At the end of the Workstation install, reboot your computer only if prompted to do so.
Note:
Remember, a workstation installation must be performed on each workstation that needs to run Sage 100 Fund Accounting.
26 Sage 100 Fund Accounting
Chapter 4:
Existing User - Upgrading
This chapter provides information that only existing users might need. It explains:
•
Upgrading from a Previous Version
•
•
Updating Your Organization Database to Version 2013.x
•
•
Adding a Module to an Organization
•
Upgrading from a Previous Version
You can only upgrade your program files to version 2013 from versions 11.0, 11.1, 11.2, 11.3, and
11.4. If you are not currently running one of these versions, you must upgrade to one of them before you can upgrade the application files to 2013.
IMPORTANT:
Our System Requirements have changed; MSDE and SQL Server 2000 editions are
no longer supported. Please verify that you are using an acceptable SQL Server.
1.
Follow the instructions in
Chapter 5: Existing User - Server Install on page 31 to upgrade the
organizational database on a server from a previous version.
2.
Once you have installed the Sage 100 Fund Accounting Server, you will need to install the workstation.
– Open the setup.exe from the \\MIP Share\Setup directory on your server, to launch the
Sage 100 Fund Accounting Workstation Install .
– If the Sage 100 Fund Accounting Workstation component is already installed on the server or you wish to install the Workstation on the server for the first time, you will need to open the application on the server to complete the upgrade process before proceeding to the next step.
3.
Follow the instructions in
Chapter 6: Existing User - Workstation Install , on page 39, to
upgrade each user’s workstation.
Changing Your Database Engine
If you are upgrading and moving your database to a different instance of SQL Express or SQL
Server, back up your system and organization databases, and then uninstall Sage 100 Fund
Accounting and your current instance of SQL.
Installation 27
Existing User - Upgrading
After you complete the installation process, restore your system database, NPSSQLSYS, along
with your organization database. For specific instructions on uninstalling, see “ Uninstalling Sage
” on page 47 and see “ Supplemental Maintenance ” on page 51 for
instructions on backing up and restoring a database.
For specific instructions on moving the Sage 100 Fund Accounting Server to a new server/ computer, see Knowledgebase article 274726 in the Sage Customer Portal. If you are new to the
Sage Customer Portal or to the Knowledgebase, visit the Customer Support Resources page for more information.
Updating Your Organization Database to Version 2013.x
You can only update your organization database after the server and workstation have been upgraded to version 2013.x. To do so:
1.
Log on to any system (Start>Programs>Sage Software>Sage 100 Fund Accounting), and select an Organization.
2.
The system displays a message stating that the organization database must be updated to the current version.
– Select Yes, to begin the backup process to back up your organization database and then upgrade it. This is strongly recommended.
– Select No, if you have a current backup of the database and want to begin the update process immediately.
3.
A utility program runs. Click Finish.
4.
When complete, a message displays informing you that your database has been updated successfully.
5.
Click OK.
Activating Your License
When you initially purchase the system, an activation code that activates any and all modules that have been purchased is included with the software. You are prompted to enter that code during installation, and do not need to enter it any other time. However, if you are currently using the system and decide to add a module (or add users or databases), a new activation code will be sent to you.
Enter the new code in the Administration system in order to use the new features:
1.
Open the Administration>System>Activate License form.
2.
On the Owned tab (or Evaluation tab if evaluating a new module), enter the new activation code. Note that the activation code is case sensitive, so it must be entered exactly as it appears on the notification.
3.
Click OK, and then the new features are registered in the system.
28 Sage 100 Fund Accounting
Existing User - Upgrading
4.
Exit the Administration system (File>Exit), and then reopen it.
Note:
If you were evaluating or adding the Scheduler, Electronic Requisitions, and/or Payroll modules, and you did not include the program files and start menu shortcuts, you can do so now. Click Start>Settings>Control Panel>Add or Remove Programs. Select Sage 100 Fund
Accounting Workstation and the Change button. The system displays the Welcome panel of the Install wizard. Click Next. Then, on the Program Maintenance panel, select the Modify option button, followed by the Next button.
Adding a Module to an Organization
A module can be added to the current organization, but first ensure that there are no users currently logged on to the system.
Note:
The activation code must be changed (Administration>System>Activate License) to include
Scheduler, Electronic Requisitions, and Payroll modules before these modules can be added.
To add a module:
1.
Open the Administration>System>Current Activity form to ensure that no one (except yourself) is currently using the organization being updated.
2.
Open the organization (File>Open Organization) in which to add the module.
3.
Open the Organization>Add a Module wizard. On the first panel, select the module to add by selecting the appropriate check box.
4.
Follow the instructions on the screen and continue through the wizard.
5.
Click Finish, and then the system adds the designated module to the current organization.
This process may take several minutes.
6.
To add a module to another organization, repeat this process.
Note:
For more information about the Add a Module wizard, see the online help or the
Administration guide.
Setting Up Security
User security needs to be set up for each new module. To do so:
1.
Open the Administration>Security>Set Up Organization Menus form to grant rights to users. This includes granting rights to new menu selections that are part of the new module.
2.
Remember, this process must be repeated for each separate organization in which the module was added.
Installation 29
Existing User - Upgrading
3.
If anyone is using the Accounting system when a module was installed, they must exit and reenter the system in order to see the new menu selections.
Note:
For more information about the Set Up Organization Menus form, see the online help or the Administration guide.
30 Sage 100 Fund Accounting
Chapter 5:
Existing User - Server Install
This chapter describes the installation process for a stand-alone or network server. Prior to upgrading the Sage 100 Fund Accounting Server Install, you must close all workstations. Once
to install the workstation.
This chapter explains the following:
•
•
•
•
•
Sage 100 Fund Accounting Server Install
Server Install Overview
The Server install is comprised of the following:
• Data Engine - Download Microsoft SQL Server 2008 R2 Express with Advanced Services from the SQL Server Express Installation link on the Setup tab of the Sage 100 Fund Accounting
Install on the Sage AutoRun.exe or use an already installed version of Microsoft SQL Server
2005 Express Edition with Advanced Services, SQL Server 2005 (Full Version), or SQL Server
2008 (Full Version).
• Sage 100 Fund Accounting Server - The Sage 100 Fund Accounting Server installation creates the MIP Share directory. We recommend accepting the default path when installing the server component.
The necessary files related to the
Sage 100 Fund Accounting Server Install are copied to the server.
To download the Microsoft SQL Server 2008 R2 Express Edition with Advanced Services from the
Microsoft website, click the SQL Server Express Installation link that displays on the Setup tab of the Sage 100 Fund Accounting Install on the Sage AutoRun.exe.
Directory Structure Overview
The Sage 100 Fund Accounting Server executable (SETUP.EXE) creates the MIP Share directory.
We recommend accepting the default path when installing the server component.
Data Files and Directory Structure
When installing the Sage 100 Fund Accounting Server, the data files and workstation share files are stored on the machine that is functioning as the server. The workstation installation stores the
Sage 100 Fund Accounting system and program files on each client machine.
Installation 31
Existing User - Server Install
After the server installation, the following directory structure exists on the drive and in the directory that was specified during installation.
MIP Share Directory
This directory contains the following folders:
• AATRIX contains the drafts and historical forms created by Aatrix, for each federal tax ID in the Companies folder.
• CONSOLIDATION FILES contains CONTEMP.TXT, which will be altered when consolidating data.
• DATA contains a copy of the NPSSQLSYS.NPS and MIPT.NPS files. These are the system and sample database files that come with the system.
• DDEPOSIT contains ACH.TXT, which will be altered when using the Direct Deposit module.
• EPAYAP contains ACHAP.TXT, which will be altered when using the Electronic Funds
Transfer for A/P module.
• FORMATS contain the files needed to print custom forms in the system. This is where you should store custom formats created by the Forms Designer module.
• GRANTADMIN contains scanned images of sample grant documentation for the Grant
Administration module.
• IMPORT includes sample DEF and data files that can be used with the Data Import/Export module.
• MIP DOCUMENTATION includes all product guides in PDF format.
• {ORGANIZATION DATABASE NAME} contains all folders for attachments. This folder is not actually created until the attachments feature is activated in the system
(Administration>Organization>Attachments>Set Up Locations).
• REPORT PDF FILES contains *.PDF files saved while using the Print to PDF feature.
32 Sage 100 Fund Accounting
Existing User - Server Install
• SETUP contains the files necessary to run the Sage 100 Fund Accounting Workstation installation. Each of the client machines will need to access this folder in order to install the
Workstation component. The SETUP.EXE file launches the Sage 100 Fund Accounting
Workstation installation.
• SQLSCRIPTS contains SQL scripts necessary for the system to function properly.
• SUPPORT contains support related folders.
Note:
Do not Password Protect the MIP Share Directory.
Sage Advisor Update Download
Use the Sage Advisor Update to download the latest Sage 100 Fund Accounting software updates.
1.
With the release of version 11.0, the Sage Advisor Update program was included in the installation.
2.
On your database server, open Start>Programs>Sage>Advisor>Sage Advisor Update. Or click the Sage Advisor Update icon in the System Tray.
3.
Click the Check for Updates button, on the Manage Updates menu, to get an updated list of all available updates.
4.
Review the Available Updates list for the Sage 100 Fund Accounting product line.
5.
Click Configuration>Download to view the download location on your server. It is recommended that you check the Sage Advisor Update folder to see if the most resent download has already been received.
6.
If the most recent download is not in your Sage Advisor Update folder, click Manage Updates and select the V2013.0.0 Update Version. Then click the Download Only button.
7.
Once the download is complete. Close the Sage Advisor Update window.
8.
Open the Sage Advisor Update folder, located on your Sage 100 Fund Accounting database server.
9.
Double -click the Sage.US.SBS.NPS.FundAccounting.Server folder and double-click the
FA113_AutoRun. . ..exe to being extracting the file. To change your database engine, see
Database Engine Install on page 33. To being the installation, see
Database Engine Install
IMPORTANT:
Our System Requirements have changed; MSDE and SQL Server 2000 editions are
no longer supported. Please verify that you are using an acceptable SQL Server.
Select one of the following that best describes your current setup, and then follow the instructions below for installation:
• SQL Server Express (can be downloaded by following a link on the AutoRun.exe) -
Microsoft SQL Server 2008 R2 Express Edition with Advanced Services can be downloaded from the SQL Server Express Installation link on the Sage AutoRun.exe.
Installation 33
Existing User - Server Install
• SQL 2008, SQL 2005, SQL Express (Already installed) - Either the Microsoft SQL Server or
SQL Express have already been installed as your server using the Microsoft website at www.microsoft.com
. Or, SQL Server 2005 or 2008 has already been installed as your server.
The SQL installation creates the \Program Files\Microsoft SQL Server directory. By default, this directory is located on the local drive in which your operating system is installed. Use the browser to change this destination during the installation.
All users have the option to install their own instance of SQL Express or SQL Server. This gives you the ability to administer it according to your practices.
SQL Server (Express Downloaded)
This section describes the download process for the Microsoft SQL Server 2008 R2 Express Edition with Advanced Services from the Sage AutoRun.exe. Please carefully read each panel of the wizard during installation.
IMPORTANT:
Before you begin, verify that Microsoft .NET Framework 4.0 or higher is installed
before you try to Install Sage 100 Fund Accounting Server. Go to Start>Settings>Control Panel>
Programs and Features.
1.
On the computer functioning as the Sage 100 Fund Accounting Server, log on as a user with local administrator rights and download and extract the latest updates using Sage Advisor
Update.
Once complete, the system automatically launches autorun.exe and the Sage 100 Fund
Accounting Setup window displays.
34 Sage 100 Fund Accounting
Existing User - Server Install
2.
Select SQL Server Express Installation and follow the steps to download SQL Server Express
R2 from the Microsoft website. Upon completion, continue the installation process.
Sage 100 Fund Accounting Server Install
This section describes the install process by continuing to use your existing database server, however, the software will be uninstalled and reinstalled.
The Sage 100 Fund Accounting Server must be upgraded before proceeding to the Existing User -
Workstation Install on page 39.
Please carefully read each panel of the wizard during installation.
Note:
To upgrade Sage 100 Fund Accounting on a on a virtual environment, you must use a virtual service client, such as VMWare's Infrastructure Client Console, instead of a Remote
Desktop Connection
1.
On the computer functioning as the Sage 100 Fund Accounting Server, log on as a user with local administrator rights, then download and extract the latest updates using Sage Advisor
Update.
2.
Once complete, the system automatically launches autorun.exe and the Sage 100 Fund
Accounting Setup window displays. After reviewing the provided documentation, select the
Begin Installation Process option.
The system begins extracting the setup.exe file.
Installation 35
Existing User - Server Install
3.
The Welcome Install Wizard displays. Click Next.
4.
The End User License Agreement displays. Select the “I accept the terms in the license agreement” option to continue with the Server Installation.
5.
Click Next. You are now ready to Install Sage 100 Fund Accounting.
36 Sage 100 Fund Accounting
6.
Click Install to begin, or use the Back button to make changes.
Existing User - Server Install
7.
Proceed through the Sage 100 Fund Accounting Server setup. This process may take several minutes.
8.
When the upgrade is complete, the InstallShield Wizard Completed panel displays.
Installation 37
Existing User - Server Install
This is the final panel of the server installation. It verifies that the Sage 100 Fund Accounting
Server installed successfully.
– Select the “Install Sage 100 Fund Accounting Workstation” check box, and then click
Finish to continue through the installation program by launching the Sage 100 Fund
Accounting Workstation Installation wizard. For instructions, proceed to
Existing User - Workstation Install on page 39.
– Alternatively, if you do not select the check box, you can install later from the MIP Share
directory. For more information, see “ Granting Access to the MIP Share Directory ” on page 18.
9.
Click Finish to complete the install.
10. If applicable, click the Exit button on the Sage 100 Fund Accounting Installation Startup form.
11. Navigate to the MIP Share directory on the Server and set it to share with Full control permissions to Everyone.
Note:
Reboot your computer only if prompted to do so.
38 Sage 100 Fund Accounting
Chapter 6:
Existing User - Workstation Install
You must have already completed the Sage 100 Fund Accounting Server Install (using Chapter
5) and Granting Access to the MIP Share Directory
, if there is a network.
This chapter describes the installation process for the Sage 100 Fund Accounting Workstation. This installation provides the program files needed to run the system. During the installation, you can choose which shortcut and executable files to install for each system, such as Administration,
Accounting, Payroll, or the entire system. Please carefully read each panel of the wizard during installation.
The necessary files related to this installation are copied to the MIP Share directory of the server during the Sage 100 Fund Accounting Server installation. There is only one executable
(SETUP.EXE) for the workstation install.
Note:
The user logged on to the workstation machine must be a member of the Local
Administrators group.
Ensuring Access to “All Users” Folder
Before you begin the workstation install and you are using Aatrix®, you must ensure that the workstation has access to the “All Users” directory. The following steps should be completed for each workstation running on Windows XP orVista.
1.
Click Start>Run.
2.
Enter the <local drive letter:> in the Open box.
3.
Click OK. The system displays an explore window.
4.
Open the Documents and Settings directory or Vista users open the “Program Data” folder.
5.
Ensure that the “All Users” and <user name> folders are listed. Also verify that each user that uses Aatrix® (for 1099s, W-2s, 990s, etc.) has “Full Control” rights (right-click on folder>Properties>Security tab). Sage 100 Fund Accounting cannot install successfully without these folders and rights. These steps should be completed for each workstation running on
Windows XP.
Installation 39
Existing User - Workstation Install
Data Files and Directory Structure
When installing the Sage 100 Fund Accounting Workstation, the system and program files are stored on each machine. After the workstation installation, the following directory structure exists on the drive and in the directory that was specified during installation.
MIP Directory
The Sage 100 Fund Accounting Workstation installation creates a MIP directory on the local disk partition with the most space. This directory contains the following folders:
• HELP contains all the files associated with the online help system.
• PROGS contains the executable (*.EXE) files required to run the system. Specific *.DLL files are included in the PROGS directory. Do NOT delete any of these files.
Sage 100 Fund Accounting Workstation Install
The Sage 100 Fund Accounting Server must be upgraded prior to upgrading the Sage 100 Fund
Accounting Workstation.
If you selected the Install Sage 100 Fund Accounting Workstation check box at the end of the
Server Install, the system automatically launches the Welcome panel of the Sage 100 Fund
Accounting Workstation install.
• When the existing data engine configuration is kept on each workstation, select
Start>Programs>Sage Software>Sage 100 Fund Accounting>{any application}. The system displays a message indicating a new version is required; select Yes to automatically launch the
Sage 100 Fund Accounting Workstation Installation.
40 Sage 100 Fund Accounting
Existing User - Workstation Install
• If the auto launch fails, due to the data engine configuration changing or Vista users with User
Account Control turned on, follow the steps below to launch the Sage 100 Fund Accounting
Workstation Install.
Note:
You must access \MIP SHARE using a UNC Path, not a mapped drive. Mapped drives are okay as long as they are consistent and persistent across all workstations, such as everyone having a G:\drive mapped to MIP Share.
– Click Start>Run.
– Enter the <\\server name> in the Open box.
– Click OK. The system displays an explore window with all the shared folders listed.
– Open the MIP Share directory on the server.
– Open the Setup folder and run SETUP.EXE.
IMPORTANT:
Vista Users -
If the User Account Control is turned on, a message displays that
“A program needs your permission to continue,” click Continue to proceed.
The system automatically launches the Welcome panel of the Sage 100 Fund Accounting
Workstation install, if you selected the Install Sage 100 Fund Accounting Workstation check box at the end of the Server Install or opened an application after the Server was updated.
If you are installing the workstation only, go to the workstation machine and log on as a user with local administrator rights. Navigate to the MIP Share directory (\\MIP Share) on the Server, open the Setup sub directory, and select Setup.exe.
1.
The Sage 100 Fund Accounting Workstation InstallShield Welcome panel displays.
Installation 41
Existing User - Workstation Install
2.
Click Next. Review the End User License Agreement and select the “I accept the terms in the license agreement” option.
42 Sage 100 Fund Accounting
Existing User - Workstation Install
3.
Click Next. Accept the default MIP destination folder (recommended), or use the Change button to navigate to a different location.
4.
Click Next. The Custom Setup panel displays, which allows you to select the systems you would like to install. By default, the system installs the start menu shortcuts and program files for all systems, even if they are not part of the license.
Installation 43
Existing User - Workstation Install
To prevent a system from being installed, ensure that the “X” (Entire feature will be unavailable) is selected. This designation prevents the installation of the program files and the start menu shortcuts for that system. You may find this useful when you need to restrict a user from launching a specific system.
Note:
If you do not install all systems now, but later decide you want to install the program files or start menu shortcuts, you can do so using Start>Settings>Control Panel>Add or
Remove Programs. Select Sage 100 Fund Accounting Workstation and the Change button. The system displays the Welcome panel of the Install wizard. Click Next. Then, on the Program
Maintenance panel, select the Modify option button, followed by the Next button.
5.
Click Next. The Install Wizard is ready to install the program.
6.
Click Install to begin the installation, or click Back to make changes to your installation settings.
44 Sage 100 Fund Accounting
Existing User - Workstation Install
7.
The system begins upgrading the Sage 100 Fund Accounting Workstation software. This process may take several minutes. The InstallShield Wizard Completed panel displays.
8.
Click Continue to complete the Workstation upgrade.
9.
Additional installs launch after you click Continue to complete the Workstation upgrade.
These include Tax Forms and eFiling by Aatrix, Qlikview, Sage Advisor Update, and SQL
Backward Compatibility. Allow any additional installs to complete, and then click OK on the
“Your install completed successfully” form.
10. If applicable, click the Exit button on the Sage 100 Fund Accounting Installation Startup form.
Note:
At the end of the Workstation install, reboot your computer only if prompted to do so.
Installation 45
Existing User - Workstation Install
11. If the Sage 100 Fund Accounting Workstation component is already installed on the server or you have installed the Workstation on the server for the first time, you will need to open the application on the server to complete the upgrade process, which allows the system to automatically update this component.
Note:
If the Sage 100 Fund Accounting Workstation component is not installed on the server, a workstation installation must be performed on each workstation that needs to run Sage 100
Fund Accounting.
12. Open the Organization>Add a Module wizard. Run through this wizard to add any new modules.
13. Open the Administration>Security>Set Up Organization Menus form to grant rights to new menu selections that are part of any new modules that were added.
46 Sage 100 Fund Accounting
Chapter 7:
Uninstalling Sage 100 Fund Accounting
This chapter describes how to uninstall the Sage 100 Fund Accounting system.
Uninstalling Steps
The following components must be uninstalled in this order:
1.
Sage 100 Fund Accounting Workstation
2.
Sage 100 Fund Accounting Server
Before uninstalling, make a backup of the organization database; see “ Chapter 9: Supplemental
Maintenance“ on page 51 for more information. Uninstall only removes the files that the
installation process copied to your computer.
Data Import/Export,
Direct Deposit, EFT for A/P, and Forms
Designer Users
When installing, the system copies files to the \MIP SHARE\IMPORT, DDEPOSIT, EPAYAP, and
FORMATS directories. During the uninstall process these files are removed. If changes have been made to these files, either change the names of the files or move them to another directory.
To Remove the Sage 100 Fund Accounting Workstation:
1.
Go to Start>Settings>Control Panel.
2.
Click Programs and Features.
3.
Select Sage 100 Fund Accounting Workstation, and then click Uninstall.
–OR–
If you are uninstalling a Sage 100 Fund Accounting Workstation on a computer, which acts as a client only (it is not on the MIP Server), run the Uninstall on the MIP Server through a UNC path
(<server name>\MIP Share\Setup\Uninstall).
To Remove the Sage 100 Fund Accounting Server:
1.
Go to Start>Settings>Control Panel.
2.
Click Programs and Features.
3.
Select Sage 100 Fund Accounting Server, and then click Uninstall.
To Remove the Sage 100 Fund Accounting System including all Third Party Applications:
1.
Use the Unistall shortcut on )<local drive letter:>\MIP Share\Setup folder.
Installation 47
Chapter 8:
Help Documentation
This chapter describes how to access the Sage 100 Fund Accounting help documentation.
Accessing Documentation
The Installation and Getting Started guides are provided with your new system. Other guides and help files are automatically installed as part of the Server Installation process. Therefore, documentation is now easily accessible to all workstations through the \MIP Share\MIP
Documentation\PDFs directory and the \Program Files\MIP\Help directory.
• Some product guides are available in PDF format. You can access these PDF files using
Help>Product Guides or click Help and Support>Resource Center>Product Guides on the
Navigation pane. These PDF files can be viewed and printed using a program, such as the
Adobe® Reader®. To install Adobe Reader, you can download it for free from http:// www.adobe.com/ .
• The online help's “context-sensitive” feature is an easy way to get help when you need it most.
Context-sensitive means that the system knows where you are working within the system so when you need help, you can press the F1 key or click the Help button. There is a wealth of information available that you can use daily to help you in your work. By experimenting with online help, you learn to use the system quickly, effectively, and efficiently.
Installation 49
Chapter 9:
Supplemental Maintenance
The following information is useful for backing up, restoring, and compressing your organizational database.
Backing Up Organization Database
You can back up and restore all organization databases and the system database (NPSSQLSYS) for the current version. When running a backup, the system creates an uncompressed copy of the database.
You can back up any database while users are in the system. However, to restore a database, all users must exit the system.
1.
Log on to any system (Start>Programs>Sage Software>Sage 100 Fund Accounting). You do not have to select an Organization.
2.
Open the File>Backup form.
3.
Select the database you want to back up from the Database to Backup drop-down list.
4.
Accept the default name (the database name, date, and time) or enter another name in the
Backup to File box.
5.
If needed, click the Browse button and select the backup directory.
6.
Click the Start button. The system backs up the database.
7.
A dialog box will indicate the location of the backup when the process is finished.
Restoring Organization Database
1.
Log on to Administration. You do not have to select an Organization.
2.
Open the File>Restore form.
3.
Select the database to restore from the drop-down list. If this is the first time a database has been restored, its name is not available in the drop-down list; you must enter a name here.
4.
Enter the name in the Restore to File box.
5.
Click the Browse button to locate the file.
6.
Click the Start button.
The path to the MDF file that you backed up is stored in the backup file. When attempting to restore the backup file, the system looks for the same path.
Installation 51
Supplemental Maintenance
Compressing Organization Database
Before starting the compress process, all users must exit the system.
1.
Log on to Administration, but do not select an Organization.
2.
Open the File>Compress form.
3.
Select the database to compress from the drop-down list.
4.
Click the Start button.
Note:
Compressing large databases can take quite some time. If the actual database file has spaces in the name, the compression program will not work. For specific instructions, see
Knowledgebase article 183479 in the Sage Customer Portal. If you are new to the Sage
Customer Portal or to the Knowledgebase, visit the Customer Support Resources page for more information.
52 Sage 100 Fund Accounting
Sage North America
10800 Pecan Park Blvd.
Suite 400
Austin, Texas 78750 www.sagenonprofit.com | 800-647-3863
©2012 Sage Software, Inc. All rights reserved. Sage, the Sage logos and the Sage product and service names mentioned herein are registered trademarks or trademarks of Sage Software, Inc., or its affiliated entities. All other trademarks are the property of their respective owners.
Lataa
Julkinen linkki päivitetty
Chattisi julkinen linkki on päivitetty. You may view and manage your chat links after registration here.
Dokumentin julkinen linkki
Mainos
