- No category
advertisement
851
BK-Verstärker
CATV Broadband Amplifier
C3-Amplificateur
G
47 - 862
29/36dB
124 dB µ V q RC - 30 MHz -1dB q q q
RC - 55 MHz -1dB
RC - 65 MHz -1dB
RC - Amp. +20 dB
Eingang Ausgang
Betriebsanleitung
BK-Verstärker
GPV 841
Erz.-Nr.
944 769-001
GPV 851
Erz.-Nr.
944 770-001
high power
+
Beschreibung
• Einsatz in CATV- / BK-Verteilnetzen bis 862 MHz
• Power Doubler GaAs Hybrid Endstufe
• Ortsgespeist
• Zwei Grundverstärkungen mit internen Steckbrücken wählbar (Interstage)
• Pegelsteller am Eingang
• Entzerrung frequenzabhängiger Leitungsdämpfung einstellbar
• Entzerrung umschaltbar 606 / 862 MHz
• Mit Diplexmodulen individuell konfigurierbarer
Rückkanal und Vorwärtskanal
5 - 30 MHz 47 - 862 MHz
5 - 55 MHz
5 - 65 MHz
77 - 862 MHz
85 - 862 MHz
• HF-Anschlüsse: F-Buchsen (female)
• Druckgußgehäuse, Schutzart IP 55, für Montage in- und außerhalb von Gebäuden
• Schraubklemme für Potentialausgleich außen am
Gehäuse
• Schirmungsmaß
≥
85 dB
• Erfüllt EN 50 083-3 Güteklasse C;
Zubehör (nicht im Lieferumfang)
Diplexmodule
• GRM 3047 P (5 - 30 MHz und 47 - 862 MHz)
Bestell-Nr. 944 412-001
• GRM 5577 P (5 - 55 MHz und 77 - 862 MHz)
Bestell-Nr. 944 413-001
• GRM 6585 P (5 - 65 MHz und 85 - 862 MHz)
Bestell-Nr. 944 416-001
Aktive Rückkanalmodule
(Entzerrer und Pegelsteller am Eingang)
• GRM 3005 G (5 - 30 MHz)
Bestell-Nr. 944 411-001
• GRM 5505 G (5 - 55 MHz)
Bestell-Nr. 944 415-001
• GRM 6505 G (5 - 65 MHz)
Bestell-Nr. 944 419-001
Aktive Rückkanalmodule
(Entzerrer und Pegelsteller am Ausgang)
• GRM 2030 G (5 - 30 MHz)
Bestell-.Nr. 944 414-001
• GRM 2055 G (5 - 55 MHz)
Bestell-Nr. 944 421-001
• GRM 2065 G (5 - 65 MHz)
Bestell-Nr. 944 420-001
Deutsch: Seite 1 English: page 5 1
Montage
• Montageort und Einbaulage so wählen, daß die
Konvektionskühlung des Verstärkers nicht behindert wird (Kühlrippen müssen senkrecht stehen).
• Wandbefestigung an den Halterungen mit passenden Schrauben (Ø max. 5 mm)
• Abstand der Befestigungen 201 mm
• Bitte Sicherheitsanforderungen nach
DIN EN 50083, Teil 1 beachten!
Einstellungen
Einstellungen am Basisgerät
Die Einstellelemente sind nach Lösen des Deckels mittels Zentralschraube zugänglich.
Abb. 1 zeigt die Leiterplatte des Basisgerätes im
Lieferzustand.
Das aktive Rückkanalmodul arbeitet nur in
Verbindung mit einem Diplexmodul.
Achtung: Kombinieren Sie das aktive Rückkanalmodul nur mit einem Diplexmodul, das denselben
Rückkanal-Frequenzbereich aufweist!
Einstellung des Line Entzerrers
2 x Jumperstellung “low” 606 MHz
2 x Jumperstellung 862 MHz = Auslieferungszustand
Abb. 1: Leiterplatte mit Einstellelementen
Leitungsentzerrung, variabel
Pegel, variabel
Steckplatz für aktives Rückkanalmodul
Steckplatz für
Diplexmodul
862 low low
862
GRM .... P
Interstage high-power
GRM .... G
DC
Grundverstärkung
"groß":
"klein":
(-7 dB)
Technische Daten Basisgerät
Typ
Bestell-Nr.
Frequenzbereich
Grundverstärkung groß klein
MHz dB
GPV 841
944 769-001
47 - 862
36
Frequenzgang
Rauschmaß dB 29 dB dB
±0,75
< 7
Ausgangspegel nach EN 50083 bei 60 dB IMA 2. Ordnung bei 60 dB IMA 3. Ordnung
Cenelec
1)
CSO / CTB dB 115 dB 122 dB 108
Rückflußdämpfung an Ein- und Ausgang dB 16
Impedanz
Ω
75
Gruppenlaufzeit
2) ns < 20
Einstellbarer Leitungsentzerrer
Einstellbarer Pegelsteller
Meßbuchse -30 ±1 dB
Betriebsspannung (50 - 60 Hz)
Leistungsaufnahme
Umgebungstemperaturbereich nach EN 60065
Funktionsfähig im Temperaturbereich
Gewicht
Abmessungen B x H x T dB 0 - 18 dB 0 - 18 dB Ausgang
V~ 230 +6 / -15%
W 14,5
°C
°C kg mm
– 20 … +55
– 40 … +60 ca. 2,5
190 x 115 x 70
1) 42 Kanäle bei 60 dB IMA
2) Gruppenlaufzeit unterer Kanal BT / FHT (Abstand 4,43 MHz)
GPV 851
944 770-001
117
124
110
Ausgang
20
Eingang
Lage der Einstellelemente bei den RK-Modulen
GRM 3005 G, GRM 5505 G und GRM 6505 G
Pegelsteller
Leitungsentzerrer
Meßbuchse,
Ausgang
–30 dB
Ausgang
Lage der Einstellelemente bei den RK-Modulen
GRM 2030 G, GRM 2055 G und GRM 2065 G
Leitungsentzerrer Pegelsteller
2
Technische Daten Diplexmodul
( Alle Daten gelten in Verbindung mit GPV 841/851)
Typ passiv
Bestell-Nr.
Frequenzbereich Rückkanal
Vorwärtskanal
Durchgangsdämpfung Rückkanal
Vorwärtskanal
Rückflußdämpfung
Entkopplung zwischen Vor- / Rückkanal
Umgebungstemperaturbereich
GRM 3047 P
944 412-001
MHz 5 - 30
MHz 47- 862 dB 1 dB 1 dB 20 dB 63
°C – 20 … +80
GRM 5577 P
944 413-001
5 - 55
77 - 862
GRM 6585 P
944 416-001
5 - 65
85 - 862
3
GRM 5505 G GRM 2065 G
Originalgröße Originalgröße
Technische Daten aktive Rückkanalmodule (Entzerrer/Pegelsteller am Eingang)
( Alle Daten gelten in Verbindung mit GPV 841/851
Typ aktiv
Bestell-Nr.
Frequenzbereich
Verstärkung
GRM 3005 G
944 411-001
MHz 5 - 30 dB 20
Frequenzgang
Rauschmaß dB 1 dB 7
Ausgangspegel nach EN 50 083 bei 60 dB IMA 2. Ordnung bei 60 dB IMA 3. Ordnund dB 110 dB 118
Rückflußdämpfung an Ein- und Ausgang dB 20
Einstellbarer Leitungsentzerrer
Einstellbarer Pegelsteller
Stromaufnahme von der internen
Betriebsspannung 24 V
Umgebungstemperaturbereich dB 0 – 10 dB 0 – 10 mA ca. 60
°C – 20 … +80
GRM 5505 G
944 415-001
5 - 55
GRM 6505 G
944 419-001
5 - 65
Technische Daten aktive Rückkanalmodule (Entzerrer/Pegelsteller am Ausgang)
( Alle Daten gelten in Verbindung mit GPV 841/851
Typ aktiv
Bestell-Nr.
Frequenzbereich
Verstärkung
GRM 2030 G
944 414-001
MHz 5 - 30 dB 20
Frequenzgang
Rauschmaß dB 1 dB 5
Ausgangspegel nach EN 50 083 bei 60 dB IMA 2. Ordnung bei 60 dB IMA 3. Ordnund dB 108 dB 116
Rückflußdämpfung an Ein- und Ausgang dB 20
Einstellbarer Leitungsentzerrer
Einstellbarer Pegelsteller
Stromaufnahme von der internen
Betriebsspannung 24 V
Umgebungstemperaturbereich dB 0 – 10 dB 0 – 10 mA ca. 60
°C – 20 … +80
GRM 2055 G
944 421-001
5 - 55
GRM 2065 G
944 420-001
5 - 65
Richard Hirschmann GmbH & Co.
Produktbereich
Interaktive Breitband-Netze
Stuttgarter Strasse 47 - 51
72 654 Neckartenzlingen
Telefon (07127) 14-0
Fax 07127 14-1300
4
851
BK-Verstärker
CATV Broadband Amplifier
C3-Amplificateur
G
47 - 862
29/36dB
124 dB µ V q q q q
RC - 30 MHz -1dB
RC - 55 MHz -1dB
RC - 65 MHz -1dB
RC - Amp. +20 dB
Input Output
Operating instructions
CATV Broadband Amplifier
GPV 841
Order code
944 769-001
GPV 851
Order code
944 770-001
high power
+
Description
• For use in CATV systems up to 862 MHz
• Power Doubler GaAs Hybrid final stage
• Mains supply
• Two basic amplification settings that can be selected via internal jumpers (Interstage)
• Adjustable level control at the input
• Equalizer for cable attenuation adjustable
• Equalizer switchable 606 / 862 MHz
• Can be individually configured with
Diplex Modules
Return channel and Forward channel
5 - 30 MHz 47 - 862 MHz
5 - 55 MHz
5 - 65 MHz
77 - 862 MHz
85 - 862 MHz
• F-connectors F socket (female)
• Die-cast housing, protection category IP 55 for indoor and outdoor installation
• Screw terminal for potential equalisation on the exterior of the housing
• Shielding rate
≥
85 dB
• Meets EN 50 083-3 Quality class C;
Accessories (not supplied)
Diplex Modules
• GRM 3047 P (5 - 30 MHz and 47 - 862 MHz)
Order No. 944 412-001
• GRM 5577 P (5 - 55 MHz and 77 - 862 MHz)
Order No. 944 413-001
• GRM 6585 P (5 - 65 MHz and 85 - 862 MHz)
Order No. 944 416-001
Active Return Channel Modules
(Equalizer/Adjustable at the Input)
• GRM 3005 G (5 - 30 MHz)
Order No. 944 411-001
• GRM 5505 G (5 - 55 MHz)
Order No. 944 415-001
• GRM 6505 G (5 - 65 MHz)
Order Nor. 944 419-001
Active Return Channel Modules
(Equalizer/Adjustable at the Output)
• GRM 2030 G (5 - 30 MHz)
Order No. 944 414-001
• GRM 2055 G (5 - 55 MHz)
Order No. 944 421-001
• GRM 2065 G (5 - 65 MHz)
Order No. 944 420-001
5
Installation
• Select fitting location and orientation such that amplifier convection cooling is not impeded
(cooling fins must be vertical).
• Fix to the wall by the brackets using suitable screws (Ø max. 5 mm)
• Distance between fixings 201 mm
• Please note the safety requirements acc. to
EN 50083, part 1!
Fig. 1: Circuit board with adjusters
GPV 841/GPV 851
Equalizer, adjustable
Level control adjustable
Pin for Active return channel module
Pin for
Diplex module
862 low low
862
GRM .... P
Interstage high-power
GRM .... G
Adjustments
Adjusments to the base units
Access to the adjusters can be gained by undoing the central bolt and removing the cover. Fig. 1 shows the base unit circuit board as supplied.
The Active Return Channel Module only works in combination with a Diplex Module only.
Important: Only use the Active Return Channel
Module with a Diplex Module that has the same return channel frequency!
Adjustment of Line Equalizer
2 x Jumper position “low” 606 MHz
2 x Jumper position 862 MHz = State of delivery
DC
Basic amplification
"high":
"low":
(-7 dB)
Specification Base Unit
Type
Order No.
Frequency range
Basic amplification high low
Frequency response
Noise figure
Output level in accordance with EN 50083 at 60 dB IMA 2nd Order
GPV 841
944 769-001
MHz 47 - 862 dB 36 dB 29 dB ±0.75
dB < 7 at 60 dB IMA 3rd Order
Cenelec
Impedance
1)
CSO / CTB
Return loss at output and input
Time group delay
2)
Equalizer range
Level control range
F Test socket -30 ±1 dB
Operating voltage (50 - 60 Hz)
Power consumption
Ambient temperature range dB 115 dB 122 dB 108 dB 16
Ω
75 ns < 20 dB dB
0 - 18
0 - 18 dB output
V~ 230 +6 / -15%
W 14.5 in accordance with EN 60065
Functional in temperature range
Weight
Dimensions W x H x D
°C – 20 … +55
°C – 40 … +60 kg ca. 2.5
mm 190 x 115 x 70
1) 42 channels at 60 dB IMA
2) Group delay PC/CAC (Distance 4.43 MHz) of lower channel
GPV 851
944 770-001
117
124
110 output
20
Input Measuring, point output
–30 dB
Output
Position of the setting elements at the RC modules
GRM 3005 G, GRM 5505 G und GRM 6505 G
Level Control
Line-
Equalizer
Position of the setting elements at the RC modules
GRM 2030 G, GRM 2055 G und GRM 2065 G
Line
Equalizer Level Conrol
6
Specification Diplex Modules
( All data relate to use with GPV 841/851)
Type passive
Order No.
Frequency range
GRM 3047 P
944 412-001 return channel MHz 5 - 30 forward channel MHz 47- 862
Throughpass
Attenuation return channel forward channel dB 1 dB 1
Return loss at input and output dB 20
Decoupling between forward/return channel dB 63
Ambient temperature range °C – 20 … +80
GRM 5577 P
944 413-001
5 - 55
77 - 862
GRM 6585 P
944 416-001
5 - 65
85 - 862
7
GRM 5505 G GRM 2065 G
Originalgröße Originalgröße
Specification Active Return Channel Modules
(Equalizer/Adjustable Level Control at the Input)
( All data relate to use with GPV 841/851)
Type aktive
Order No.
Frequency range
Amplification
GRM 3005 G
944 411-001
MHz 5 - 30 dB 20
Frequency response
Noise figure dB 1 dB 7
Output Level in accordance with EN 50 083 at 60 dB IMA 2nd Order dB 110 at 60 dB IMA 3rd Order
Return loss at input and output
Equalizer range
Level control range
Current consumption from the internal 24 V Supply
Ambient temperature range dB 118 dB 20 dB 0 – 10 dB 0 – 10 mA ca. 60
°C – 20 … +80
GRM 5505 G
944 415-001
5 - 55
GRM 6505 G
944 419-001
5 - 65
Specification Active Return Channel Modules
(Equalizer/Adjustable Level Control at the Output)
( All data relate to use with GPV 841/851)
Type aktive
Order No.
Frequency range
Amplification
GRM 2030 G
944 414-001
MHz 5 - 30 dB 20
Frequency response
Noise figure dB 1 dB 5
Output Level in accordance with EN 50 083 at 60 dB IMA 2nd Order dB 108 at 60 dB IMA 3rd Order
Return loss at input and output
Equalizer range
Level control range
Current consumption from the internal 24 V Supply
Ambient temperature range dB 116 dB 20 dB 0 – 10 dB 0 – 10 mA ca. 60
°C – 20 … +80
GRM 2055 G
944 421-001
5 - 55
GRM 2065 G
944 420-001
5 - 65
Richard Hirschmann GmbH & Co.
Interactive Broadband Networks
Division
Stuttgarter Strasse 47 - 51
D 72 654 Neckartenzlingen
Phone +49 7127 14-0
Fax +49 7127 14 1696
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement