Konica Minolta bizhub C552DS Series Function Manual

Add to my manuals
110 Pages

advertisement

Konica Minolta bizhub C552DS Series Function Manual | Manualzz

User’s Guide [Advanced Function Operations]

Table of contents

1 Introduction

1.1

1.1.1

1.1.2

1.2

1.3

1.3.1

1.3.2

Welcome .......................................................................................................................................... 1-2

User's guides ..................................................................................................................................... 1-2

User's Guide ...................................................................................................................................... 1-3

Use conditions................................................................................................................................. 1-3

Conventions used in this manual .................................................................................................. 1-4

Symbols used in this manual ............................................................................................................. 1-4

To use this machine safely................................................................................................................. 1-4

Procedural instruction........................................................................................................................ 1-4

Key symbols....................................................................................................................................... 1-5

Original and paper indications ........................................................................................................... 1-5

Original and paper sizes .................................................................................................................... 1-5

Original and paper indications ........................................................................................................... 1-5

2 Overview

2.1

2.1.1

2.1.2

2.1.3

Overview of each function ............................................................................................................. 2-2

Supported function table ................................................................................................................... 2-2

Key layout after the function is expanded ......................................................................................... 2-2

Functions available with expanded functions .................................................................................... 2-3

3 Assigning Application Keys

3.1

3.1.1

3.1.2

3.2

3.2.1

Overview .......................................................................................................................................... 3-2

Key layout after the function is expanded ......................................................................................... 3-2

Application Menu ............................................................................................................................... 3-3

Customizing the application keys 1 and 2 .................................................................................... 3-4

Application Key Settings.................................................................................................................... 3-4

4 Web Browser Function

4.1

4.1.1

4.1.2

4.2

4.3

4.3.1

4.3.2

4.3.3

4.4

4.4.1

4.4.2

4.4.3

4.4.4

Overview .......................................................................................................................................... 4-2

Available operations with the Web Browser function ........................................................................ 4-2

Specifications..................................................................................................................................... 4-3

Specifications for Web Browser ........................................................................................................ 4-3

Restrictions on Flash Player .............................................................................................................. 4-3

Displaying Web Browser ................................................................................................................ 4-4

Configuring settings to enable use of the Web browser............................................................. 4-5

Restricting the use of the Web browser in the MFP .......................................................................... 4-5

Web Browser Setting ......................................................................................................................... 4-5

Restricting the use of Web browser for each user ............................................................................ 4-6

Function Permission .......................................................................................................................... 4-6

Restricting the use of local contents ................................................................................................. 4-7

Web browser contents access .......................................................................................................... 4-7

Basic operation ............................................................................................................................... 4-8

Screen components........................................................................................................................... 4-8

Operating instructions........................................................................................................................ 4-9

Operation using the Touch Panel ...................................................................................................... 4-9

Operation using the Keypad .............................................................................................................. 4-9

How to enter text ............................................................................................................................... 4-9

Entering text....................................................................................................................................... 4-9

Screen display mode ....................................................................................................................... 4-10

Normal.............................................................................................................................................. 4-10

bizhub C652/C652DS/C552/C552DS/C452 Contents-1

4.4.5

4.5

4.5.1

4.5.2

4.5.3

4.5.4

4.5.5

4.5.6

4.5.7

4.6

4.6.1

4.6.2

4.6.3

4.6.4

4.7

4.7.1

4.7.2

4.7.3

4.8

4.8.1

4.8.2

4.8.3

Just-Fit Rendering ........................................................................................................................... 4-10

Smart-Fit Rendering......................................................................................................................... 4-10

Specifying speaker volume .............................................................................................................. 4-10

Toolbar ........................................................................................................................................... 4-11

Description of the toolbar ................................................................................................................ 4-11

Favorites - List ................................................................................................................................. 4-12

List of favorites................................................................................................................................. 4-12

Favorites - Add ................................................................................................................................ 4-12

Address ............................................................................................................................................ 4-13

History.............................................................................................................................................. 4-13

Display History ................................................................................................................................. 4-13

Print.................................................................................................................................................. 4-14

Menu ................................................................................................................................................ 4-14

Configuring the Web Browser settings....................................................................................... 4-15

Page Operation ................................................................................................................................ 4-15

Display ............................................................................................................................................. 4-15

Manage windows ............................................................................................................................. 4-16

Settings ............................................................................................................................................ 4-16

Printing, displaying, or saving a document file .......................................................................... 4-17

Printing a document file ................................................................................................................... 4-17

Displaying a document file............................................................................................................... 4-18

Saving a document file .................................................................................................................... 4-19

Uploading a document file ........................................................................................................... 4-20

Restrictions ...................................................................................................................................... 4-20

Uploading a scanned document file ................................................................................................ 4-20

Uploading a document file in a User Box ........................................................................................ 4-21

5 PageScope Web Connection (Web Browser Function)

5.1

5.1.1

5.1.2

5.2

5.3

5.3.1

5.3.2

5.4

5.4.1

5.4.2

Using PageScope Web Connection .............................................................................................. 5-2

Prior check ......................................................................................................................................... 5-2

How to access ................................................................................................................................... 5-2

Screen components........................................................................................................................ 5-3

Logging in and logging out ............................................................................................................ 5-4

Login .................................................................................................................................................. 5-4

Logout ................................................................................................................................................ 5-4

Using the User Box function .......................................................................................................... 5-5

Open User Box .................................................................................................................................. 5-5

Open User Box .................................................................................................................................. 5-5

File List ............................................................................................................................................... 5-6

Document operations ........................................................................................................................ 5-7

Printing a document........................................................................................................................... 5-7

Deleting a document.......................................................................................................................... 5-9

6 Image Panel

6.1

6.2

6.3

6.3.1

6.3.2

6.3.3

Overview .......................................................................................................................................... 6-2

Features ............................................................................................................................................. 6-2

Displaying the Image Panel............................................................................................................ 6-3

Operating Image Panel ................................................................................................................... 6-4

Screen components........................................................................................................................... 6-4

General operation .............................................................................................................................. 6-5

Reading a document.......................................................................................................................... 6-7

Scanning a document ........................................................................................................................ 6-7

Retrieving from User Box................................................................................................................... 6-8

Retrieving a document from an external memory.............................................................................. 6-9

Using data saved in a cellular phone or PDA .................................................................................. 6-10

bizhub C652/C652DS/C552/C552DS/C452 Contents-2

6.3.4

6.3.5

6.3.6

6.3.7

6.4

6.4.1

6.4.2

6.5

6.5.1

6.5.2

6.5.3

Editing the document....................................................................................................................... 6-11

Preview ............................................................................................................................................ 6-11

Document/Page - Edit Document.................................................................................................... 6-11

Document/Page - Combine Documents.......................................................................................... 6-12

Document/Page - Document Settings............................................................................................. 6-13

Return to Scan Dest......................................................................................................................... 6-13

Specifying a destination................................................................................................................... 6-14

Printing ............................................................................................................................................. 6-14

Specifying destinations.................................................................................................................... 6-15

Saving a document in an external memory ..................................................................................... 6-15

Checking the send tray .................................................................................................................... 6-16

Send Tray......................................................................................................................................... 6-16

Check TX Tray.................................................................................................................................. 6-16

Sending data from a cellular phone or PDA .................................................................................... 6-17

Registering a photo in the address book ................................................................................... 6-18

Specifications of photo data ............................................................................................................ 6-18

Registering photo data .................................................................................................................... 6-19

Customizing Image Panel ............................................................................................................ 6-21

Customizing the Read Data area ..................................................................................................... 6-21

Customizing the Document Destination area .................................................................................. 6-22

Deleting a registered shortcut icon .................................................................................................. 6-23

7 PDF Processing Function

7.1

7.2

7.3

7.3.1

7.3.2

7.4

Overview .......................................................................................................................................... 7-2

Available operations with the PDF processing function .................................................................... 7-2

PDF document properties .............................................................................................................. 7-3

Encrypting PDF document and adding digital signature ............................................................ 7-4

Password-based encryption .............................................................................................................. 7-4

Digital ID-based encryption ............................................................................................................... 7-5

Direct Print....................................................................................................................................... 7-7

8 Searchable PDF function

8.1

8.2

8.3

Overview .......................................................................................................................................... 8-2

Precautions when creating searchable PDF files .............................................................................. 8-2

Recognizable character size .............................................................................................................. 8-2

Configuring the OCR operation setting ........................................................................................ 8-3

OCR Operation Setting ...................................................................................................................... 8-3

Configuring the searchable PDF setting....................................................................................... 8-4

9 My Panel Function

9.1

9.1.1

9.1.2

9.1.3

9.2

9.2.1

9.2.2

9.3

9.3.1

9.3.2

9.3.3

9.3.4

Overview .......................................................................................................................................... 9-2

Available operations with My Panel ................................................................................................... 9-2

Customizable items ........................................................................................................................... 9-2

Functions available by linking to the Web browser ........................................................................... 9-2

Functions available with Image Panel................................................................................................ 9-3

My Panel acquisition procedure ........................................................................................................ 9-3

Restrictions on using the My Panel function ..................................................................................... 9-3

Displaying My Panel........................................................................................................................ 9-4

Main Menu ......................................................................................................................................... 9-4

Displaying Main Menu........................................................................................................................ 9-4

Customizing My Panel .................................................................................................................... 9-5

My Panel Settings .............................................................................................................................. 9-5

Displaying [My Panel Settings]........................................................................................................... 9-5

Language Setting ............................................................................................................................... 9-6

Measurement Unit Settings ............................................................................................................... 9-6

bizhub C652/C652DS/C552/C552DS/C452 Contents-3

9.3.5

9.3.6

9.3.7

9.3.8

9.3.9

9.3.10

Copier Settings .................................................................................................................................. 9-7

Default Tab......................................................................................................................................... 9-7

Shortcut Key 1 - Shortcut Key 2 ........................................................................................................ 9-7

Quick Settings 1 - Quick Settings 4................................................................................................... 9-8

Default Tab Density Settings ............................................................................................................. 9-8

Scan/Fax Settings.............................................................................................................................. 9-9

Default Tab......................................................................................................................................... 9-9

Address Book Index Default .............................................................................................................. 9-9

Shortcut Key 1 - Shortcut Key 2 ...................................................................................................... 9-10

Default Address Book ...................................................................................................................... 9-10

Default Address Type....................................................................................................................... 9-10

User Box Settings ............................................................................................................................ 9-11

Default Tab....................................................................................................................................... 9-11

Shortcut Key 1 - Shortcut Key 2 ...................................................................................................... 9-11

Color Selection Settings .................................................................................................................. 9-12

Main Menu Settings ......................................................................................................................... 9-12

Main menu button ............................................................................................................................ 9-12

Registering a main menu button...................................................................................................... 9-12

Initial Screen Settings ...................................................................................................................... 9-13

10 My Address function

10.1

10.1.1

10.1.2

10.1.3

10.2

10.2.1

10.2.2

10.3

10.3.1

10.3.2

10.4

10.4.1

10.4.2

Overview ........................................................................................................................................ 10-2

Classification of address books....................................................................................................... 10-2

Public address book ........................................................................................................................ 10-2

My Address Book ............................................................................................................................ 10-2

My Address Book acquisition procedure......................................................................................... 10-2

Restrictions on using the My Address function ............................................................................... 10-3

Registering and editing a destination ......................................................................................... 10-4

Address Book .................................................................................................................................. 10-4

Group ............................................................................................................................................... 10-5

Copying destinations between address books .......................................................................... 10-7

Copying destinations from the public address book to My Address Book ..................................... 10-7

Copying destinations from My Address Book to the public address book ..................................... 10-8

Using My Address Book when sending a document................................................................. 10-9

Specifying destinations.................................................................................................................... 10-9

Searching for destinations ............................................................................................................... 10-9

11 Index

11.1

11.2

Index by item ................................................................................................................................. 11-2

Index by button.............................................................................................................................. 11-3

bizhub C652/C652DS/C552/C552DS/C452 Contents-4

1

Introduction

1.1

Welcome 1

1 Introduction

1.1

1.1.1

Welcome

Thank you for purchasing this machine.

This User's Guide describes the overview and usage of functions available by registering an optional license kit to this machine, and functions available by connecting it to an application. To use each function effectively, please read this User's Guide.

User's guides

Printed manual

Quick Guide Copy/Print/Fax/Scan/Box Operations

Overview

This manual describes operating procedures and the functions that are most frequently used in order to enable you to begin using this machine immediately.

This manual also contains notes and precautions that should be followed to ensure safe usage of this machine.

Please be sure to read this manual before using this machine.

User's guide CD manuals

Copy Operations

Enlarge Display Operations

Print Operations

Box Operations

Network Scan/Fax/Network Fax Operations

Fax Driver Operations

Network Administrator

Overview

This manual describes details on copy mode operations and the settings of this machine.

• Specifications of originals and copy paper

• Copy function

• Maintaining this machine

• Troubleshooting

This manual describes details on operating procedures of the enlarge display mode.

• Copy function

• Scanning function

• G3 fax function

• Network fax function

This manual describes details on printer functions.

• Printer function

• Setting the printer driver

This manual describes details on the boxed functions using the hard disk.

• Saving data in user boxes

• Retrieving data from user boxes

• Transferring and printing data from user boxes

This manual describes details on transmitting scanned data.

• E-mail TX, FTP TX, SMB TX, Save in User Box, Web-

DAV TX, Web Services

• G3 fax

• IP Address Fax, Internet Fax

This manual describes details on the fax driver function that transmits faxes directly from a computer.

• PC-FAX

This manual describes details on setting methods for each function using the network connection.

• Network settings

• Settings using PageScope Web Connection bizhub C652/C652DS/C552/C552DS/C452 1-2

1.2

Use conditions

User's guide CD manuals

Advanced Function Operations

Trademarks/Copyrights

Overview

This manual describes details on functions that become available by registering the optional license kit and by connecting to an application.

• Web browser function

• Image panel

• PDF Processing Function

• Searchable PDF

• My panel and My address functions

This manual describes details on trademarks and copyrights.

• Trademarks and copyrights

1

1.1.2

User's Guide

This User's Guide is intended for users ranging from those using this machine for the first time to administrators.

It describes basic operations, functions that enable more convenient operations, simple troubleshooting operations, and various setting methods of this machine.

Note that basic technical knowledge about the product is required to enable users to perform troubleshooting operation. Limit your troubleshooting operations to the areas explained in this manual.

Should you experience any problems, please contact our service representative.

1.2

Use conditions

Enabling i-Option LK-101 v2 or i-Option LK-103 v2 allows you to access the Internet from the Control Panel of the MFP.

Users will bear a responsibility for contents accessed, downloaded, and uploaded using Web Browser in the

MFP, and other communicated contents. Users shall conform to the company rules and laws of the country where this machine is used.

Konica Minolta Business Technologies, Inc. and its group businesses will not bear any responsibility for use of the Internet by users.

[i-Option LK-103 v2] may not be available depending on the area. For details, contact your service representative.

bizhub C652/C652DS/C552/C552DS/C452 1-3

1.3

1.3

Conventions used in this manual

Conventions used in this manual

1.3.1

Symbols used in this manual

Symbols are used in this manual to express various types of information.

The following describes each symbol related to correct and safe usage of this machine.

To use this machine safely

7 WARNING

This symbol indicates that a failure to heed the instructions may lead to death or serious injury.

1

7 CAUTION

This symbol indicates that negligence of the instructions may lead to mishandling that may cause injury or property damage.

NOTICE

This symbol indicates a risk that may result in damage to this machine or documents.

Follow the instructions to avoid property damage.

Procedural instruction

0 This check mark indicates an option that is required in order to use conditions or functions that are prerequisite for a procedure.

1

This format number "1" represents the first step.

2

This format number represents the order of serial steps.

% This symbol indicates a supplementary explanation of a procedural instruction.

The operation procedures are described using illustrations.

%

This symbol indicates transition of the Control Panel to access a desired menu item.

This symbol indicates a desired page.

bizhub C652/C652DS/C552/C552DS/C452 1-4

1.3

Conventions used in this manual

d

Reference

This symbol indicates a reference.

View the reference as required.

Key symbols

[ ]

Key names on the control panel, Key names on the touch panel or computer screen, or Power switch are indicated by these brackets.

1

1.3.2

Original and paper indications

Original and paper sizes

The following explains the indication for originals and paper described in this manual.

When indicating the original or paper size, the Y side represents the width and the X side the length.

Original and paper indications

w indicates the paper size with the length (X) being longer than the width (Y).

v indicates the paper size with the length (X) being shorter than the width (Y).

bizhub C652/C652DS/C552/C552DS/C452 1-5

2

Overview

2.1

Overview of each function 2

2 Overview

2.1

2.1.1

Overview of each function

The following describes the overview of each function.

-

-

Reference

To use the advanced function, an optional Upgrade Kit UK-203 is required.

-

A [Hard Disk] must be installed in the MFP in order to use the advanced function.

For details on the license kit registration and enabling functions on MFPs, refer to the "Quick Guide

Copy/Print/Fax/Scan/Box Operations".

To connect the function to the application, enable it at the application side. For details on enabling the function, refer to the manual for the corresponding application.

Supported function table

The following table shows the supported functions for the license kits and applications.

i-Option LK-101 v2 i-Option LK-102 i-Option LK-103 v2 i-Option LK-105

Web Browser o

− o

Image Panel o

− o

PDF processing

− o o

Searchable

PDF o

PageScope My Panel Manager

My Panel o

My Address o

2.1.2

Key layout after the function is expanded

Adding the Web Browser function, Image Panel function or My Panel function changes the usage of the [User

Box], [Fax/Scan], and [Copy] keys on the Control Panel.

The [User Box] key functions as an [Application Menu], and the [Fax/Scan] and [Copy] keys function as application keys.

-

-

Press [Application Menu] to display the Application Menu, which allows you to switch to the added function.

To fit the use status, the function to be assigned to the application key can be changed.

For details, refer to page 3-2.

bizhub C652/C652DS/C552/C552DS/C452 2-2

2.1

2.1.3

Overview of each function

Functions available with expanded functions

The following describes the overview of each function. For details, refer to the reference described below.

2

Function

Web Browser

Image Panel

PDF processing

Searchable PDF

My Panel

My Address

Overview

This function can be used by registering i-Option LK-101 v2 or i-Option

LK-103 v2 in the MFP.

By using the Control Panel of the MFP connected to the network, you can access to the Internet or intranet and display or print the contents.

Also, through a Web browser, you can operate PageScope Web Connection of the MFP connected to the network and use documents saved in User Boxes.

This function can be used by registering i-Option LK-101 v2 or i-Option

LK-103 v2 in the MFP.

Image Panel is a new intuitive and easy-to-understand panel interface.

This panel helps you easily image the entire operation flow from loading to sending a document.

You can add photo data to the one-touch destinations using PageScope

Web Connection. The registered photo data is applied to the address list of Image Panel.

This function can be used by registering i-Option LK-102 or i-Option LK-

103 v2 in the MFP.

Performs password- or digital ID-based encryption of PDF, adds a digital signature, and configures property settings when distributing documents in the PDF format using the scan or User Box function.

This function is available when i-Option LK-105 is registered with the

MFP.

You can create a text searchable PDF file by pasting transparent text data on the area of a document in which characters are recognized through an OCR process.

You can create a searchable PDF file when saving or sending an original in the PDF format using the scan or User Box functions.

This function is used in connection with the PageScope My Panel Manager.

Available by centrally managing the environment of the Control Panel customized by the user depending on the application (My Panel), and then obtaining My Panel on the MFP selected by the user.

This function is used in connection with the PageScope My Panel Manager.

Available by centrally managing the personal address book (My Address

Book) by the server, and then obtaining My Address Book on the MFP selected by the user.

Reference

p. 4-2

p. 5-2

p. 6-2

p. 7-2

p. 8-2

p. 9-2

p. 10-2

Reference

When the accounting management device is installed in the MFP, Image Panel cannot be used.

bizhub C652/C652DS/C552/C552DS/C452 2-3

3

Assigning Application Keys

3.1

Overview 3

3 Assigning Application Keys

3.1

3.1.1

Overview

The following describes the key layout and Application Menu of the Control Panel.

Key layout after the function is expanded

Adding the Web Browser function, Image Panel function or My Panel function allows [User Box] to function as [Application Menu], and [Fax/Scan] and [Copy] as application keys.

Reference

The Web Browser and Image Panel functions can be used by registering i-Option LK-101 v2 or i-Option

LK-103 v2 in the MFP.

The My Panel function is used in connection with the PageScope My Panel Manager.

1 2 3

No.

1

Name

Application menu

2 Application key 1

Description

Press this key to display the Application Menu. You cannot assign a different function to this key.

If a function is added, attach a Application Menu sticker (included in the

Upgrade Kit UK-203) to change the key name on the Control Panel.

For details, refer to page 3-3.

The fax/scan function is assigned by default. The administrator can assign a different function to this key.

If the function assigned to the key is changed, attach a sticker describing the new function (included in the Upgrade Kit UK-203) to change the key name on the Control Panel.

For details on assigning a function, refer to page 3-4.

bizhub C652/C652DS/C552/C552DS/C452 3-2

3.1

Overview

No.

3

Name

Application key 2

Description

The copy function is assigned by default. The administrator can assign a different function to this key.

If the function assigned to the key is changed, attach a sticker describing the new function (included in the Upgrade Kit UK-203) to change the key name on the Control Panel.

For details on assigning a function, refer to page 3-4.

3

3.1.2

Application Menu

Press [Application Menu] to display the Application Menu.

To use a function not assigned to the application key 1 or 2, you can switch functions to a desired one from the Application Menu.

bizhub C652/C652DS/C552/C552DS/C452 3-3

3.2

3.2

Customizing the application keys 1 and 2

Customizing the application keys 1 and 2

To fit the use status, the function to be assigned to the application keys 1 and 2 can be changed.

3.2.1

Application Key Settings

To assign a function to the application keys 1 and 2, use [Application Key Settings].

1

Press [Utility/Counter] to display "Utility".

2

Press [Administrator Settings].

3

Enter the administrator password, and then press [OK].

4

Press [System Settings].

5

In [System Settings] (2/2), press [Application Key Settings].

3

6

Select an application key (Key 1 or Key 2) to which you assign a function.

bizhub C652/C652DS/C552/C552DS/C452 3-4

3.2

Customizing the application keys 1 and 2

7

Select a function to be assigned.

8

Press [OK].

The function is assigned to the application key.

3

bizhub C652/C652DS/C552/C552DS/C452 3-5

4

Web Browser Function

4.1

Overview 4

4 Web Browser Function

4.1

4.1.1

Overview

The Web Browser function prints, displays, and saves contents on the Internet or intranet by accessing them from the Control Panel of the MFP connected to the network.

Reference

This function can be used on the MFP with i-Option LK-101 v2 or i-Option LK-103 v2 registered.

Available operations with the Web Browser function

-

-

The Web Browser function allows you to perform the following operations.

Displaying and printing Web contents on the Internet or intranet.

Displaying, printing, and saving a document file on the Internet or intranet.

Uploading a scanned document file or a document file saved in a User Box to a server on the Internet or intranet.

Sharing documents in the User Box of MFPs on the network using PageScope Web Connection.

When the My Panel function is available, you can personalize the user operation environment of the

Web browser by linking the Web browser with My Panel.

d

Reference

For details on using PageScope Web Connection from the Control Panel, refer to page 5-2.

For details on My Panel, refer to page 9-2.

bizhub C652/C652DS/C552/C552DS/C452 4-2

4.1

4.1.2

Overview

Specifications

Specifications for Web Browser

The following shows the major specifications of the Web Browser installed in the MFP.

Item

Browser engine

Supported protocols

Supported markup language

Supported style sheet

Supported script language

Supported DOM

Supported format

Supported SSL/TLS versions

Supported character codes

Display mode

PDF viewer

Flash player

Specifications

NetFront

HTTP (HTTP/0.9, 1.0, 1.1), HTTPS, TCP/IP

HTML 4.01, XHTML 1.1/Basic

Part of CSS1 and 2

Part of JavaScript 1.5, ECMAScript 3rd Edition, Ajax (limited to the scope supported by JavaScript)

Part of Level 1 and 2

JPEG, BMP, PNG, GIF, animation GIF, PDF, Flash 7.0 and earlier

SSL 2.0, SSL 3.0, TLS 1.0

Japanese (Shift_JIS), Japanese (ISO-2022-JP), Japanese (EUC-JP), Chinese

Simplified (GB2312), Chinese Traditional (Big5), Western European (ISO-8859-

1), Unicode (UTF-8)

Normal, Just-Fit Rendering, Smart-Fit Rendering

Adobe® Reader® LE

Adobe® Flash® Player 7

4

Restrictions on Flash Player

-

-

-

-

-

-

There are following restrictions on the Flash Player installed in Web Browser.

-

-

-

The function to generate an event by key operations is not supported.

The functions to paste or obtain data such as character strings from the clipboard are not supported.

The context menu is not supported.

The print function of Flash is not supported.

The functions to execute JavaScript from Flash or operate Flash from JavaScript are not supported.

The screen without a window (pop-up) is not supported.

The favorite function of Flash is not supported.

The function to communicate data in real time using the Flash Media Server is not supported.

The XMLSocket-based communication function is not supported.

bizhub C652/C652DS/C552/C552DS/C452 4-3

4.2

4.2

Displaying Web Browser 4

Displaying Web Browser

In Application Menu, press [Web Browser]. The page specified as the home is displayed.

Reference

-

-

If a login user is using the Web browser linked to My Panel and the user presses [Web Browser], the

Web browser setting and information related to the user is downloaded to the MFP from the server. If the user has specified a personal home page, that page is displayed.

When the Web browser starts, you can specify whether to display the home page or the last page that

was visited. For details, refer to page 4-16.

d

Reference

For details on the Application Menu, refer to page 3-3.

For details on My Panel, refer to page 9-2.

bizhub C652/C652DS/C552/C552DS/C452 4-4

4.3

4.3

Configuring settings to enable use of the Web browser 4

Configuring settings to enable use of the Web browser

If you do not want to allow use of the Web browser in the MFP, you can restrict its use without disabling the license kit. Also, you can restrict use of the Web browser for each user.

4.3.1

Restricting the use of the Web browser in the MFP

If you do not want to allow use of the Web browser, you can restrict its use without disabling the license kit.

Web Browser Setting

1

Press [Utility/Counter] to display "Utility".

2

Press [Administrator Settings].

3

Enter the administrator password, and then press [OK].

4

Press [Network Settings].

5

In [Network Settings] (2/2), press [Web Browser Setting].

6

Select [Invalid], and then press [OK].

Reference

If [Web Browser Setting] is set to [Invalid], [Web Browser] is hidden in the Application Menu.

bizhub C652/C652DS/C552/C552DS/C452 4-5

4.3

4.3.2

Configuring settings to enable use of the Web browser

Restricting the use of Web browser for each user

If user management is performed in the MFP, you can restrict use of the Web browser for each user.

Function Permission

1

Press [Utility/Counter] to display "Utility".

2

Press [Administrator Settings].

3

Enter the administrator password, and then press [OK].

4

Press [User Authentication/ Account Track].

5

In [User Authentication Settings], press [User Registration].

6

Select the user you want to restrict use of the Web browser, and press [Edit].

% If you want to restrict public users to use the Web browser, press [ ] and select [Public].

7

Press [Function Permission].

8

In [Function Permission] (3/3), specify "Web Browser" to [Restrict], and press [OK].

4

Reference

This setting is not available if [Invalid] is specified in [Administrator Settings]ö[Network Settings]ö[Web Browser Setting].

Configuring the function permission of the public user is available when public user access is allowed in [Administrator Settings]ö[User Authentication/ Account Track]ö[General Settings]ö[Public User

Access].

If users are managed in the external server, you can configure the default settings for function permissions to users who log in to the MFP using external server authentication for the first time. To configure it, select [Administrator Settings]ö[User Authentication/ Account Track]ö[User Authentication Settings]ö[Administrative Settings]ö[Default Function Permission]ö[Web Browser]. For details on [Default Function Permission], refer to the "User's Guide Network Administrator".

bizhub C652/C652DS/C552/C552DS/C452 4-6

4.3

4.3.3

Configuring settings to enable use of the Web browser 4

Restricting the use of local contents

If the Web browser is used through the use of an application that interacts with the Web browser, you can access the files (pre-installed contents, image files, help files, etc.) saved in the HDD of the MFP from the

Web browser.

The administrator can restrict the use of files saved in the HDD of the MFP from the Web browser as required.

Reference

For details on the application that interacts with the Web browser, contact your service representative.

Web browser contents access

1

Press [Utility/Counter] to display "Utility".

2

Press [Administrator Settings].

3

Enter the administrator password, and then press [OK].

4

Press [Security Settings].

5

Press [Security Details].

6

In [Security Details] (4/4), specify [Web browser contents access] to [Restrict], and press [OK].

bizhub C652/C652DS/C552/C552DS/C452 4-7

4.4

4.4

Basic operation

Basic operation

4.4.1

Screen components

The Web browser screen has the following components.

1

4

2

4 3

No.

1

2

3

4

Name

Toolbar

Scroll bar

Window

Icon

Description

Operates Web Browser or configure the Web Browser settings. It is always displayed on the Web Browser screen.

For details, refer to page 4-11.

Appears on the right of the screen when all display contents are not displayed vertically in one screen.

Appears at the bottom of the screen when all display contents are not displayed horizontally in one screen.

When multiple windows are displayed, you can switch the window using the tab located at the bottom of the screen.

Press [e] in the active tab to close the window.

The icon that represents the connection status appears when loading contents.

If the optional local connection kit is installed in the MFP, the speaker icon is displayed.

Reference

When the optional local connection kit is installed in the MFP, sound from Web pages or Flash contents can be output through the speaker in the local connection kit. The speaker volume can be adjustable

using the speaker icon. For details, refer to page 4-10.

bizhub C652/C652DS/C552/C552DS/C452 4-8

4.4

4.4.2

Basic operation 4

Operating instructions

Operate Web Browser mainly on the Touch Panel. You can perform some of the operations from the Keypad of the Control Panel.

Reference

Using the Stylus Pen to operate the Touch Panel provides operating comfort.

Operation using the Touch Panel

Operate Web Browser mainly on the Touch Panel.

-

-

-

To select an item, press a desired item.

If a link is provided in the contents, press the link to jump to it.

-

If you need to enter characters, press the entry form in the dialog box or contents. The keyboard screen appears. To enter characters, use the keyboard screen.

To scroll the screen, press [ ], [ ], [ ], or [ ] on the scroll bar.

Operation using the Keypad

You can use the Keypad in the Control Panel to enter numeric values or select items in the list.

4.4.3

How to enter text

If you need to enter characters, press the entry form in the dialog box or contents. The keyboard screen appears.

Entering text

Press the character you want to enter in the keyboard screen.

-

-

To enter uppercase letters or symbols, press [Shift].

You can also enter numbers using the Keypad.

-

-

-

-

Reference

To change a character in the entered text, press [ ] or [ ] to move the cursor to the character to be changed, press [Delete], and then enter the desired letter or number.

To delete all characters entered, press [C] (clear) in the Control Panel.

To revert to the setting when the keyboard was displayed, press [Undo].

Some buttons may not appear, depending on the characters being entered.

When entering character codes on multiple lines is allowed, the linefeed button appears.

bizhub C652/C652DS/C552/C552DS/C452 4-9

4.4

4.4.4

Basic operation

Screen display mode

There are three types of display modes for the Web Browser screen.

Normal

This is the display mode same as that for the normal Web Browser. Content is not adjusted to the screen size. Scroll the screen horizontally and vertically when browsing it.

(The default is set to "Normal". )

Just-Fit Rendering

The content layout is maintained and a page is displayed by reducing its width to fit the screen. Scroll the screen horizontally and vertically when browsing it.

4

Smart-Fit Rendering

The table is divided and laid out vertically to fit the width of the screen. Scroll the screen horizontally and vertically when browsing it. The layout may be changed depending on the page to be displayed.

d

Reference

For details on changing the display mode, refer to page 4-15.

4.4.5

Specifying speaker volume

When the optional local connection kit is installed in the MFP, sound from Web pages or Flash contents can be output through the speaker in the local connection kit.

-

-

If a speaker is connected to the MFP, the speaker icon is displayed at the bottom left of the Web browser.

Press the speaker icon to display the Volume screen where you can control the speaker volume.

To increase the volume one level, press [Higher], or the [#] key on the Control Panel.

To reduce the volume one level, press [Lower], or the [*] key on the Control Panel.

Pressing [Mute] outputs no sound. In addition, the speaker icon changes to the speaker mute icon.

bizhub C652/C652DS/C552/C552DS/C452 4-10

4.5

4.5

Toolbar

Toolbar

The toolbar on the top of the Web Browser screen allows you to perform various operations and configure various settings.

4

4.5.1

Description of the toolbar

The following shows the functions of the buttons on the toolbar.

Icon Name

Back

Description

Brings you back to the previous page.

Next Brings you to the next page.

Reload/Abort Reloads the currently displayed page to update the contents.

If you press this button while loading a page, the loading stops.

Home

Favorites - List

Displays the page registered as the home.

By default, "http://www.konicaminolta.com/" is registered.

For details on changing the home page, refer to page 4-15.

Displays the list of registered favorites.

For details, refer to page 4-12.

Favorites - Add Adds the URL of the currently displayed page to the favorites. Adding a URL to the favorites requires the administrator authority.

For details, refer to page 4-12.

Address Brings you to the screen to enter a URL.

For details, refer to page 4-13.

History

Print

Displays the list of pages displayed up till then.

For details, refer to page 4-13.

Prints the currently displayed contents.

For details, refer to page 4-14.

Menu Configure the Web browser settings. There are two types of menus; one for the user and one for the administrator.

For details, refer to page 4-14.

bizhub C652/C652DS/C552/C552DS/C452 4-11

4.5

4.5.2

Toolbar 4

Favorites - List

Press [List] to display the list of the registered favorites using the thumbnails. Selecting a favorite allows you to access the corresponding URL.

Reference

If the user is using the Web browser linked to My Panel, the list of favorites for the user who is managed in the server is displayed.

List of favorites

Item

List View/Thumbnail

View

Address View/Title

View

Delete All

Close

Description

Switches the favorites display between the list display and thumbnail view.

Switches the display of favorites between the address view and title view.

Deletes all registered favorites.

Deleting the favorites requires the administrator authority.

Closes the list of favorites.

Press to display the list of operations available for the item. From this list, select the desired operation.

The following shows the available operations.

Item

Open New Window

Edit

Up

Down

Delete

Close

Description

Opens the selected favorite with a new window.

Edits the title and address of the selected favorite.

Editing the favorites requires the administrator authority.

Brings you above the selected favorite.

Use this button when the list of favorites is displayed in the list view.

Brings you below the selected favorite.

Use this button when the list of favorites is displayed in the list view.

Deletes the selected favorite.

Deleting the favorites requires the administrator authority.

Closes this screen.

4.5.3

Favorites - Add

(Adding a URL to the favorites requires the administrator authority. )

Pressing [Add] prompts you to enter the administrator password. Enter the administrator password and press

[OK]. The registration screen appears. Check the contents and press [OK]. The URL of the displayed page is added to the favorites. The MFP can hold up to 100 favorites.

-

-

To register the thumbnail images of the page to be added to the favorites, select the "Register Thumbnail" check box on the registration screen.

It is registered with the title previously given to the contents. To change the title, press the entry form for the title on the registration screen, and then change the title.

Reference

For users using the Web browser by linking to My Panel, administrator authority is not required. My Panel can hold up to 20 favorites for each user.

bizhub C652/C652DS/C552/C552DS/C452 4-12

4.5

4.5.4

Toolbar 4

Address

Press [Address] to display the screen for entering the address.

Press the entry form to display the keyboard screen. Enter the URL of the page to be displayed, and press

[OK] or [Open New Window].

Press [Input History] to display the list of input history. You can reference the past inputs. The MFP can hold up to 100 input history records.

Reference

-

-

If you display the screen for entering the address, you see the URL of the page being displayed. To delete the URL currently shown, display the keyboard screen and press [Delete]. Press [C] (clear) in the

Control Panel to delete all data entries.

If the user is using the Web browser linked to My Panel, the list of input history records for the user who is managed in the server is displayed. My Panel can hold up to 20 input history records for each user.

4.5.5

History

Press [History] to display the display history screen. From the list of display history, select a page to be displayed again. The MFP can hold up to 100 display history records.

Reference

If the user is using the Web browser linked to My Panel, the list of display history records for the user who is managed in the server is displayed. My Panel can hold up to 20 display history records for each user.

Display History

Item

Address View/Title

View

Delete All

Close

Description

Switches the display history between the address view and title view.

Deletes all registered entries in the display history.

Deleting the display history requires the administrator authority.

Closes the list of display history.

Press to display the list of operations available for the item. From this list, select the desired operation.

The following shows the available operations.

Item

Open New Window

Delete

Close

Description

Loads the selected display history with a new window.

Deletes the selected display history.

Deleting the display history requires the administrator authority.

Closes this screen.

bizhub C652/C652DS/C552/C552DS/C452 4-13

4.5

4.5.6

Toolbar 4

Print

Press [Print] to display the Print screen.

Configure the print settings, and then press [Start] or the [Start] key on the control panel. The displayed contents are printed.

Item

Color

Paper

Simplex/Duplex

Stamp Settings

Finishing

Description

Specify whether to print originals in color or black-and-white.

Select the size of paper for printing.

Select whether to print in 2-sided mode.

Specify whether to print the [Title], [URL], [Date/Time], and [Page Number].

Configure settings for collating, grouping, offsetting. stapling, hole punching, folding, or binding.

-

Reference

If you attempt to print a Web page or JPEG or other image that takes up a large amount of memory, a scan error may occur and printing will be disabled.

The setting value of [Finishing] varies depending on which options are installed.

The Staple settings are available only if the optional finisher is installed.

The Punch settings are available only if the punch kit is installed on the optional finisher.

The Fold and Center Staple & Fold functions can be used when a saddle stitcher is installed on the optional finisher.

4.5.7

Menu

Press [Menu] to configure the Web Browser settings. There are two types of menus; one for the user and one for the administrator.

For details, refer to page 4-15.

bizhub C652/C652DS/C552/C552DS/C452 4-14

4.6

4.6

Configuring the Web Browser settings 4

Configuring the Web Browser settings

Pressing [Menu] in the tool bar displays the menu for the user. Users can only view the Web browser operation settings and information.

The administrator of the MFP can configure the operating environment and security settings in addition to the

Web browser operation settings. To display the administrator menu, press [Administrator] in the menu screen, and enter the administrator password.

4.6.1

4.6.2

Page Operation

In the "Page Operation" tab, configure the settings for page operation.

Item

Use for Home Page

*

Page Memo

Save as Page Memo

Zoom Display

Description

Registers the displayed page as the home page.

Displays the page saved as a page memo. Selecting the page memo from the list displays the corresponding page.

Press to display the list of operations available for the item. From this list, select the desired operation.

Saves the displayed page as it is.

Press [Zoom Display] to display the key to enlarge or reduce the page display size. Press the key to adjust the page display size.

Reference

Items with

*

are displayed only for the administrator menu.

[Use for Home Page] is displayed for users using the Web browser by linking to My Panel.

Display

In the "Display" tab, configure settings for displaying contents. The administrator of the MFP can configure the settings to hide or display images and animations, enable or disable JavaScript, and make detailed setting related to the contents display.

Item

Display Mode

Description

Select the display mode for Web Browser from "Normal", "Just-Fit Rendering", and "Smart-Fit Rendering".

For details, refer to page 4-10.

Specify the encode type to be used when displaying contents.

Encoding

Detail Settings Configure settings for displaying contents.

<For administrator>

• "Image": Select this check box to display images.

• "Animation": Select this check box to display animation GIF.

• "Table": Select this check box to recognize the table in HTML and adjust the layout.

• "JavaScript": Select this check box to enable JavaScript in contents.

• "CSS": Select this check box to enable CSS in contents.

• "Ward Wrap": Select this check box to enable the word wrap in contents.

• "Line Boundary Char. Check": Select this check box to enable the line boundary character check in contents.

• "Rapid-Render": Select this check box to enable the Rapid-Render function.

• "Pop-Up Window": Select this check box to allow displaying the pop-up window.

• "Offline Permission": Select this check box to allow the use of the contents off-line.

• "Auto Flash Playback": Select this check box to automatically play a Flash content.

<For user>

• "Enable Offline Display": Select this check box to enable viewing of the contents off-line. Displayed when "Offline Permission" is allowed by the administrator.

Color Selection Setting Select a color for the selected item ("Green", "Blue", "Yellow", or "Orange").

bizhub C652/C652DS/C552/C552DS/C452 4-15

4.6

4.6.3

Configuring the Web Browser settings

Manage windows

In the "Manage windows" tab, operate the window. Up to five windows can be opened.

Item

Create new window

Open in new window

Close active window

Close other windows

Description

Displays the contents of the URL registered as the home page with a new window.

Displays the link destination page with a new window.

Closes the active window.

Closes all windows.

This is not selectable when only one window is open.

4

4.6.4

Settings

The "Settings" tab allows you to check and reset the Web browser information. The administrator of the MFP can configure the operating environment and security settings of the Web browser.

Item

Startup Settings

Security

Cookies

Cache

Proxy

*

*

*

*

*

Authentication Information

*

Access Log

*

Description

Specify whether to display the page registered as the home page or the last page being displayed when you exited Web Browser previously, at the startup of Web Browser.

Configure SSL or TLS setting, or display the root certificate or CA certificate.

Configure settings to receive and delete cookies. This menu is also used to delete all cookies saved in the MFP.

Configure settings to use and delete caches. This menu is also used to delete all caches saved in the MFP.

Configure the settings for use of proxy.

To use the proxy, register the address and port for the proxy server. If proxy authentication is required, register the ID and password for use in proxy authentication.

Specify the timing to delete the authentication information you have entered in the contents. This menu is also used to delete all authentication information saved in the MFP.

Check for access history of all users.

You can check the "ID", "User Name", "URL" and "Access".

Displays Web Browser information.

Web Browser Information

Reset Restart the Web browser.

-

Reference

Items with

*

are displayed only for the administrator menu.

The following settings are available for users using the Web browser by linking to My Panel.

"Startup Settings"

Setting for deleting "Cookies"

Setting for deleting "Authentication Information"

My Panel can hold up to 20 items of cookies and authentication information for each user.

bizhub C652/C652DS/C552/C552DS/C452 4-16

4.7

4.7

Printing, displaying, or saving a document file 4

Printing, displaying, or saving a document file

If a link to a document file is provided in the displayed contents, you can print, display, or save the document file.

The PDF and XPS formats are supported for the document files.

You cannot display an XPS file.

Press the link to the document file in the contents to display the top screen of the document file.

4.7.1

Printing a document file

Press [Print] to display the Print screen.

Configure the print settings, and then press [Start] or the [Start] key on the control panel. The document file is downloaded and printed.

Item

Color

Paper

Simplex/Duplex

Stamp Settings

Finishing

Description

Specify whether to print originals in color or black-and-white.

Select the size of paper for printing.

Select whether to print in 2-sided mode.

Press this button to specify whether to print a [Date/Time] and [Page Number].

Configure settings for collating, grouping, offsetting. stapling, hole punching, folding, or binding.

Reference

If you attempt to print a document file that takes up a large amount of memory, a scan error may occur and printing will be disabled.

If the downloaded PDF is encrypted, it is saved in the Encryption PDF User Box without being printed.

bizhub C652/C652DS/C552/C552DS/C452 4-17

4.7

Printing, displaying, or saving a document file

-

4

The setting value of [Finishing] varies depending on which options are installed.

The Staple settings are available only if the optional finisher is installed.

The Punch settings are available only if the punch kit is installed on the optional finisher.

The Fold and Center Staple & Fold functions can be used when a saddle stitcher is installed on the optional finisher.

4.7.2

Displaying a document file

Press [View] to display the link destination PDF file.

The toolbar on the top of the screen allows you to enlarge, reduce, print, or save the PDF file.

Key Description

Brings you back to the top page.

Brings you back to the previous page.

Brings you to the next page.

Brings you to the last page.

Rotates the display 90 degrees clockwise.

Increases the zoom ratio.

Reduces the zoom ratio.

Displays according to the width of the display area.

Displays the entire page.

Select the User Box to save the document file.

Configure the print settings, and print the document file.

Displays the splash window (displayed momentarily when the software activates).

bizhub C652/C652DS/C552/C552DS/C452 4-18

4.7

Printing, displaying, or saving a document file

Key Description

Closes the screen.

4

4.7.3

Saving a document file

Press [Save]. The User Box selection screen is displayed.

Select the User Box to save the file, press[OK], and then [Start] or [Start]. Then the document file is saved in the User Box.

Reference

To save a document file to a User Box, you must register the User Box in the MFP in advance. For details, refer to the "User's Guide Box Operations".

When printing a document file (full color) that was saved in a User Box from the Web browser, you cannot specify [Zoom] or [Combine].

bizhub C652/C652DS/C552/C552DS/C452 4-19

4.8

4.8

Uploading a document file 4

Uploading a document file

If document files are shared on the server, you can upload a scanned document file or a document file in a

User Box to the server using a Web Browser.

This section explains how to upload a document file, using the following upload site as an example.

Example

Item

[Browse]

[OK]

Description

Press this button to select a document file to be uploaded.

"type" is set to "file" in the Input tag of HTML.

Press this button to upload a document file.

"type" is set to "submit" in the Input tag of HTML.

4.8.1

4.8.2

Restrictions

-

-

-

Note that there are following restrictions to use this function.

PDF, TIFF, or XPS is the type of a document file that can be uploaded. A document cannot be divided to upload.

Multiple document files cannot be uploaded at the same time.

The user cannot manually edit the file name text box.

If you perform one of the following operations after selecting a document file to be uploaded, the job is deleted together with the selected document file.

The System Auto Reset function has been started.

The Web browser has been closed.

The upload site has been updated by operating the toolbar of the Web browser.

The Web browser has been restarted.

The user has logged out during login processing.

The sub power switch has been turned off.

[Reset] has been pressed to reset the panel.

Uploading a scanned document file

The following explains the procedure to upload a scanned document file.

Reference

This procedure is not available for users who are disabled from scanning data.

The file format cannot be set to JPEG when scanning an original to be uploaded.

1

Display the upload site using the Web browser of the MFP.

2

Press the button to select a document file to be uploaded.

% In this example, press [Browse]. bizhub C652/C652DS/C552/C552DS/C452 4-20

4.8

Uploading a document file

3

Press [Scan].

4

4

Place the original to be uploaded on the MFP.

5

Configure the scan settings, and press [Start] or the [Start] key.

% If [Proof Copy] is selected, you can check finishing.

After scanning is completed, the file name is displayed in the text box.

6

Press the button to start uploading.

% In this example, press [OK].

4.8.3

Uploading of a document file then starts.

Uploading a document file in a User Box

The following explains the procedure to upload a document file retrieved from a User Box.

-

-

Reference

-

-

This procedure is not available for users who are disabled from accessing the saved documents.

Before uploading a document file in a User Box, create a User Box to save the document file in.

-

Only the Public User Box and Personal User Box can be selected.

The file format cannot be set to JPEG when selecting a document file to be uploaded from a User Box.

When selecting a JPEG document file saved in a User Box, the file format is changed to PDF. If necessary, specify the appropriate file format before uploading a document file.

When uploading a document file saved in a User Box while Page Separation is enabled, Page Separation is canceled and changed to Multi Page.

1

Display the upload site using the Web browser of the MFP.

2

Press the button to select a document file to be uploaded.

% In this example, press [Browse].

bizhub C652/C652DS/C552/C552DS/C452 4-21

4.8

Uploading a document file

3

Press the [User Box] key.

4

4

Select a desired User Box, and press [Use Document].

5

Select a document file to be uploaded, and press [File Settings].

% Select multiple document files and press [Combine]; they can be combined as one file. The combination order can be changed as required.

% Select a document file and press [Document Details] to check the date and time the document file was saved and to preview the image.

6

Configure the file setting, and press [Start] or the [Start] key.

% Press [Application] to configure the stamp or page number print setting.

The file name appears in the text box.

7

Press the button to start uploading.

% In this example, press [OK].

Uploading of a document file then starts.

bizhub C652/C652DS/C552/C552DS/C452 4-22

5

PageScope Web Connection

(Web Browser Function)

5.1

Using PageScope Web Connection 5

5 PageScope Web Connection (Web Browser Function)

5.1

5.1.1

5.1.2

Using PageScope Web Connection

PageScope Web Connection is a device management utility that is supported by the HTTP server built in this machine. To use this utility, directly access the MFP connected to the network using Web Browser.

To use this utility using Web Browser installed in the MFP, only the User Box function is available.

This chapter describes how to use documents in the User Box of the MFP on the network by operating PageScope Web Connection using the Web Browser installed in the MFP.

-

-

Reference

This function can be used on the MFP with i-Option LK-101 v2 or i-Option LK-103 v2 registered.

i-Option LK-101 v2 or i-Option LK-103 v2 must be registered also in the MFP access destination.

For details on using the Web Browser installed in the MFP, refer to page 4-2.

To operate PageScope Web Connection from a Web browser of your computer, you can use various functions such as the status check, setting change, and network setting functions of the MFP. For details, refer to the "User's Guide Network Administrator".

Prior check

The most recent information may not appear in PageScope Web Connection screens because older versions of pages are saved in the cache for the Web browser. In addition, problems may occur when the cache is used.

When using PageScope Web Connection, disable the cache for the Web browser.

Reference

Changing the cache settings requires the administrator authority.

1

Press [Menu] on the toolbar of the Web browser.

2

Press [Administrator].

3

Enter the administrator password, and then press [OK].

4

Press the "Settings" tab, and then select "Cache".

5

Clear the "Use cache" check box, and then press [OK].

How to access

Start the Web browser, and then specify the IP address of the MFP to be accessed.

1

Press [Address] on the toolbar of the Web browser.

2

Press the entry form to display the keyboard screen.

3

Enter the IP address of the MFP to be accessed, and then press [OK].

4

Press [OK] or [Open New Window].

The PageScope Web Connection screen appears.

Reference

If you have specified to not receive cookies for Web browser settings, PageScope Web Connection

screen does not appear. For details on configuring cookie settings, refer to page 4-16.

If you display the screen for entering the address, you see the URL of the page being displayed. To delete the URL currently shown, display the keyboard screen and press [Delete]. Press [C] (clear) in the

Control Panel to delete all URL entries.

bizhub C652/C652DS/C552/C552DS/C452 5-2

5.2

5.2

Screen components

Screen components

The PageScope Web Connection screen is constructed as shown below.

3

1

2

4 5

5

6

4

5

6

No.

1

2

3

Name

KONICA MINOLTA logo

PageScope Web

Connection logo

Login user name

Logout

Help

Contents display

Description

Press the logo to go to the KONICA MINOLTA Web site (http://www.konicaminolta.com/).

Press the logo to display the version information for PageScope Web Connection.

Displays the icon of the current mode and the name of the user who is logged on (public, registered user, or account).

Press this button to log out from the current mode.

Press this button to reference the online manual.

Displays the contents of PageScope Web Connection.

bizhub C652/C652DS/C552/C552DS/C452 5-3

5.3

5.3

Logging in and logging out 5

Logging in and logging out

If you have specified to perform User Authentication or Account Track on the MFP, the login screen appears after displaying PageScope Web Connection.

Reference

If you have not specified to perform User Authentication or Account Track, the screen displayed when you logged in as a public user appears.

To use PageScope Web Connection using the Web Browser installed in the MFP, its administrator mode is not available.

5.3.1

Login

Select whether to log in as a public user or registered user. If External Server Authentication is selected, select an external authentication server.

Enter the required information, and press [Login]. Select a display language if necessary.

5.3.2

Reference

The User Boxes that can be accessed vary depending on the logged in user or account track.

Logout

Press [Logout] on the upper right of the screen to display a logout confirmation screen. Press [OK]. The login screen appears again.

bizhub C652/C652DS/C552/C552DS/C452 5-4

5.4

5.4

Using the User Box function 5

Using the User Box function

To use PageScope Web Connection using the Web Browser installed in the MFP, the following operations are available as the User Box function.

Operating documents in the User Box on the MFP being used or a different MFP connected to the network.

Using the Public, Personal, and Group User Boxes as User Box Types.

Displaying, printing, and deleting a document in the User Box.

5.4.1

Open User Box

Logging in using PageScope Web Connection displays the list of User Boxes (Public, Personal, and Group

User Boxes) registered in the accessed MFP.

Open User Box

Select a desired User Box name ("User Box Name") at User Box List. Alternatively, directly enter a User Box number ("User Box Number") and User Box password ("User Box Password"), and then press [OK].

Reference

When you select a User Box name ("User Box Name") with a password specified in "User Box List", a screen for entering the password appears.

"Open User Box"

Item

User Box Number

User Box Password

"User Box List"

Item

Search from Index

Page (Display by 50 cases)

User Box List

Description

Enter the User Box number to be opened.

If a password is set to the target User Box, enter the password.

Description

Switch the index display according to the indexes selected when creating a

User Box.

When this machine contains 50 or more User Boxes, specify the desired page to change the display.

Displays the "User Box Number", "User Box Name", "Type" and "Time

Stored".

A key icon appears beside User Boxes where a password has been specified.

bizhub C652/C652DS/C552/C552DS/C452 5-5

5.4

Using the User Box function 5

File List

Select a User Box in "Open User Box". The basic information of the User Box is displayed with a list of the documents saved in the User Box.

Item

Thumbnail View

Specify operation

Changes the display

Select

Thumbnail

Document Name

Number of Originals

Edit Name

Description

Specify whether to view the thumbnail images of the document.

Set to OFF for list display.

Select an operation.

For details, refer to page 5-7.

Press this button to display the "Select" check box beside all documents with which the selected operation can be performed.

Displays a check box beside all documents with which the selected operation can be performed.

Displays thumbnail images of the document.

Displays the name of the document.

Displays the number of originals in a document.

Press this button to change the document name.

bizhub C652/C652DS/C552/C552DS/C452 5-6

5.4

5.4.2

Using the User Box function

Document operations

A selected document can be printed or deleted.

Printing a document

1

Select "Print" from "Specify operation", and then press [Changes the display].

5

A check box appears beside all printable documents.

2

Select the check box for the document to be printed, and then press [Print Setting].

bizhub C652/C652DS/C552/C552DS/C452 5-7

5.4

Using the User Box function 5

3

Configure necessary settings, and then press [OK].

% In "Page Range", select whether to print all pages of the selected document or to print by specifying a page range.

% In "Change order", you can change the print order when printing multiple documents.

4

Press [Open File].

5

Press [Print].

% If [View] is pressed, a PDF file appears. To print the displayed PDF file, press .

6

Configure print settings, and then press [Start] or the [Start] key on the control panel.

Reference

If the "Function Version" of the destination MFP is not "Version 3", press [Open File] in Step 4 to display the PDF file on the panel. To print the displayed PDF file, press . To check the function version of the MFP, select "Device Information" in [Utility].

bizhub C652/C652DS/C552/C552DS/C452 5-8

5.4

Using the User Box function

Deleting a document

1

Select "Delete" from "Specify operation", and then press [Changes the display].

5

A check box appears beside the documents that can be deleted.

2

Select the check box for the document to be deleted, and then press [Delete].

% Select the "Check/Uncheck (applied to all the documents )" check box to select all documents.

bizhub C652/C652DS/C552/C552DS/C452 5-9

5.4

Using the User Box function

3

Check the document name to be deleted, and then press [OK].

5

The document is deleted.

bizhub C652/C652DS/C552/C552DS/C452 5-10

6

Image Panel

6.1

Overview 6

6

6.1

Image Panel

Overview

Image Panel is a new intuitive and easy-to-understand panel interface.

Reference

This function can be used on the MFP with i-Option LK-101 v2 or i-Option LK-103 v2 registered.

If [User Authentication/ Account Track] ö [Scan to Authorized Folder Settings] is set to [Limit] in [Administrator Settings], Image Panel cannot be used.

Features

Image Panel divides the operation workflow into three processes, "reading a document", "editing a document", and "specifying a destination", which can be operated on one screen. This allows you to easily understand the entire operation workflow and operation in progress.

Image Panel focuses on operability. Therefore, the functions available in Image Panel are limited compared with the conventional panel.

When the My Panel and My Address function are available, you can customize the Image Panel screen as a user-specific screen.

d

Reference

For details on the My Panel function, refer to page 9-2.

For details on the My Address function, refer to page 10-2.

bizhub C652/C652DS/C552/C552DS/C452 6-2

6.2

6.2

Displaying the Image Panel

Displaying the Image Panel

In Application Menu, press [Image Panel] to display the Image Panel top screen.

6

d

Reference

For details on the Application Menu, refer to page 3-3.

bizhub C652/C652DS/C552/C552DS/C452 6-3

6.3

6.3

Operating Image Panel

Operating Image Panel

6.3.1

Screen components

The Image Panel screen consists of the following.

1 3 4 5 6

6

2

9

8 7

5

6

No.

1

2

3

4

7

8

9

Name

Login Information area

Read Data area

Description

Displays the user name and icon of the user who is currently logged in.

Desktop area

List Display/Thumbnail View switching

Message area

Status area

Edit tool area

Send Tray/Edit Tool display switching

Document Destination area

Scan a document, retrieve a document from a User Box or external memory, and send data from a cellular phone or PDA.

Documents read in the Read Data area are displayed in a thumbnail view or list view.

Switches the desktop area display between the list display and thumbnail view.

Displays an auxiliary message such as operating instructions.

Displays the date and current time.

If an alert occurs, an alert icon appears.

Edit the page, combine and change settings of the document after it is scanned.

Switches the display between the send tray and edit tool display.

For details on the send tray, refer to page 6-16.

Specify a destination of the read document from [Print] or [Destination

List].

bizhub C652/C652DS/C552/C552DS/C452 6-4

6.3

6.3.2

Operating Image Panel 6

General operation

The following describes the operation flow from document reading processing to sending processing by showing operations of Image Panel in order of "reading a document", "editing a document", and "specifying a destination".

Reference

You can specify a destination first, and then read a document.

In the Read Data area, read or retrieve a document.

• To scan a document, place the document, and then press [Scan]. Configure the scan settings as need-

ed, and then start to read the document. For details, refer to page 6-7.

• To use a document saved in a User Box, select the User Box from [Document Source List], and select

the document you want to retrieve. For details, refer to page 6-8.

• To use a document saved in an external memory, select [External Memory] from [Document Source

List], and select the document you want to retrieve. For details, refer to page 6-9.

• To use data saved in a cellular phone or PDA, select [Mobile] from [Document Source List]. For details,

refer to page 6-10.

Select [Scan] Select [Document Source List].

In the Edit Tool area, edit the read document. For details, refer to page 6-11.

In the Document Destination area, specify a destination of the read document.

To print, press [Print]. For details, refer to page 6-14.

To send the document, select a destination from [Destination List]. For details, refer to page 6-15.

• To save data in an external memory, press [External Memory] in the Destination List screen. For de-

tails, refer to page 6-15.

Select [Print].

Select [Destination List] bizhub C652/C652DS/C552/C552DS/C452 6-5

6.3

Operating Image Panel

If you specify an address, the send tray appears. For details, refer to page 6-16.

6

Press [Start] to send the document.

• To send data from a cellular phone or PDA, press

[Start] to display a PIN code. Enter the PIN code in the cellular phone or PDA to send data to the MFP.

Data is sent to the specified destination. For de-

tails, refer to page 6-17.

bizhub C652/C652DS/C552/C552DS/C452 6-6

6.3

6.3.3

Operating Image Panel 6

Reading a document

Scan a document, retrieve a document from a User Box or external memory, and send data from a cellular phone or PDA.

Scanning a document

Press [Scan] to display the Scan Settings screen. Configure the scan settings as needed, and then press

[Scan].

Reference

Only one document can be scanned.

Item

Original Type

Simplex/Duplex

Resolution

File Type

Density

Color

Document Name

Separate Scan

Description

Select the image quality from [Text], [Text/Photo], [Photo], [Dot Matrix Original] and [Copied Paper] according to the contents of the original to be scanned.

Select either to scan a 1-sided original or 2-sided original.

Select the scan resolution from [200 e 100dpi (Standard)], [200 e 200dpi

(Fine)], [300 e 300dpi], [400 e 400dpi (Super Fine)] and [600 e 600dpi (Ultra

Fine)].

Select a file type from [PDF], [Compact PDF], [TIFF], [JPEG], [XPS] and [Compact XPS].

Select whether to save the whole scanned pages as one file, or to divide a file in specified number of pages in order to save data. You cannot select [Multi

Page] if [JPEG] is selected for file type.

To send divided files by attaching them to an E-mail, specify "E-mail Attachment Method". Select [All Files Sent as one (1) E-mail] to attach all divided files to one E-mail message. Select [One (1) File per E-Mail] to send E-mail messages for each divided file.

Selecting [Compact PDF] for file type allows you to specify [Outline PDF].

If either i-Option LK-102 or i-Option LK-103 v2 is registered in the MFP, selecting [PDF]or [Compact PDF] for file type allows you to specify [Encryption] and

[PDF Document Properties]. For details on the function, refer to page 7-2.

If i-Option LK-105 is registered in the MFP, selecting [PDF]or [Compact PDF] for the file type allows you to specify [Searchable PDF]. For details on the func-

tion, refer to page 8-2.

Adjust the density for scanning.

Select the scan color from [Auto Color], [Full Color], [Gray Scale] and [Black].

Specify the document name.

Press this button to divide scanning of the document into several times. It is useful for the following cases.

• When the number of pages of a document is too many, and it cannot be loaded into the ADF

• When placing the originals on the original glass

• When 1-sided originals and 2-sided originals are mixed bizhub C652/C652DS/C552/C552DS/C452 6-7

6.3

Operating Image Panel 6

Retrieving from User Box

Select a User Box from [Document Source List] to display the Use Document screen. Select a document to be retrieved, and then press [OK].

-

-

-

-

Reference

If a password has been specified for the selected User Box, the password input screen appears. Enter the password.

Only one User Box can be selected.

Up to 10 documents can be retrieved from a User Box at one time.

If a User Box is specified as a destination, you cannot retrieve more than one document.

If [Print]is specified as a destination, you cannot retrieve more than one document.

You cannot specify the User Box, from which you retrieved the document, as the destination.

Item

Edit Name

Document Details

Description

Press this button to change the name of the selected document.

Press this button to check the detailed information or preview image of the selected document.

bizhub C652/C652DS/C552/C552DS/C452 6-8

6.3

Operating Image Panel 6

Retrieving a document from an external memory

Select [External Memory] from [Document Source List] to display the list of documents saved in the external memory. Select a document to be retrieved, and then press [OK].

-

-

-

-

-

Reference

To retrieve a document from an external memory, you must configure the following settings in the MFP depending on the purpose of the document to be used.

To print a retrieved document, in [Administrator Settings]ö[System Settings]ö[User Box Settings]ö[External Memory Function Settings], set [Print Document] to [ON]. To additionally perform user authentication, in [Administrator Settings]ö[User Authentication/ Account Track]ö[User Authentication Settings]ö[User Registration], set [Function Permission]ö[Print] to [Allow] for each user.

To save a retrieved document in a User Box, in [Administrator Settings]ö[System Settings]ö[User Box

Settings]ö[External Memory Function Settings], set [External Memory Document Scan] to [ON]. To additionally perform user authentication, in [Administrator Settings]ö[User Authentication/ Account

Track]ö[User Authentication Settings]ö[User Registration], set [Function Permission]ö[External

Memory Document Scan] to [Allow] for each user.

The available file formats are PDF, TIFF, JPEG, and XPS.

Up to 200 documents can be retrieved from an external memory.

To open a folder, select the one you want to open, and then press [Open].

You cannot specify a JPEG document together with any other format at the same time.

If a document has been retrieved from an external memory, you cannot read the document using [Scan] or [Document Source List].

-

-

You can only specify either [Print] or a User Box as a destination of a document retrieved from an external memory. Also, you can specify only one User Box as a destination. To save a document in a User

Box, you must create a User Box and register the User Box in the address book in advance.

If other than User Box is specified as a destination, you cannot select [External Memory].

bizhub C652/C652DS/C552/C552DS/C452 6-9

6.3

Operating Image Panel 6

Using data saved in a cellular phone or PDA

Select [Mobile] from [Document Source List]. Selecting [Mobile/PDA] and pressing [OK] displays the cellular phone icon on the desktop area.

<Specification of communication with a cellular phone or PDA>

Item

Communication protocol

Supporting profile

Supporting file type

Specifications

Bluetooth Ver. 2.0 + EDR

OPP/BPP/SPP

PDF/CPDF/XPS/CXPS/TIFF/JPEG/XHTML/RepliGo

Supporting XHTML file Character code: UTF-8, Shift-JIS, ISO-8859

Extension of link file: JPEG, JPG, PNG

-

-

-

-

-

Reference

To connect the MFP to a cellular phone or PDA, install the optional Local Interface Kit EK-605 in the

MFP. Additionally, configure the following settings in the MFP.

Set [Administrator Settings]ö[Network Settings]ö[Bluetooth Setting] to [Enable]. Also, set [Administrator Settings]ö[System Connection]ö[Cellular Phone/PDA Setting] to [Allow].

To perform user authentication, in [Administrator Settings]ö[User Authentication/ Account

Track]ö[User Authentication Settings]ö[User Registration], set [Function Permission]ö[Cellular

Phone/PDA] to [Allow] for each user.

If [Mobile/PDA] is selected, you cannot read a document using [Scan] or [Document Source List].

You can only specify either [Print] or a User Box as a destination for sending data from a cellular phone or PDA. Also, you can specify only one User Box as a destination. To save a document in a User Box, you must create a User Box and register the User Box in the address book in advance.

If other than [Print] or a User Box is specified as a destination, you cannot select [Mobile].

This machine supports RepliGo version 2.1.0.9.

To print an XHTML file, since a linked file is retrieved using the WebDAV client function, you must configure the following settings in the MFP in advance.

Set [Administrator Settings]ö[Network Settings]ö[WebDAV Settings]ö[WebDAV Client Settings] to

[ON].

To connect via a proxy, register a proxy server in [Proxy Server Address] of [WebDAV Client Settings].

Additionally, set [User Settings]ö[Cellular Phone/PDA Setting]ö[Proxy Server Use] to [Yes].

In [User Settings]ö[Cellular Phone/PDA Setting]ö[Link File Error Notification], specify the operation for the machine to execute when it is unable to retrieve the linked file.

d

Reference

For details on how to send data from a cellular phone or PDA, refer to page 6-17.

The function to connect the MFP to a cellular phone or PDA is available even if the license kit is not registered.

For details, refer to the "User's Guide Box Operations" and "User's Guide Print Operations".

bizhub C652/C652DS/C552/C552DS/C452 6-10

6.3

6.3.4

Operating Image Panel 6

Editing the document

Edit the read document.

Reference

When using data saved in a cellular phone or PDA, you cannot check the preview image or edit the data.

Preview

Press this button to check the detailed information or preview image of the selected document.

Reference

For a document retrieved from an external memory, the [Preview] function is not available.

For a combined document, the preview function is available only for the first document.

Document/Page - Edit Document

Edit the pages of a selected document.

You can rotate the page that has been scanned in the wrong direction, or delete an unnecessary page. For a document consisting of multiple pages, you can move pages to change the page order. Also, you can preview the pages to check the page content.

Reference

If you have selected multiple documents, the edit page function is not available.

If you have selected a combined document, the edit page function is not available.

Item

Odd Page

Even Page

Preview /Set Range

Delete Page

Description

Press this button to select the odd page.

Press this button to select the even page.

Press this button to preview the page.

Press this button to delete the selected page.

bizhub C652/C652DS/C552/C552DS/C452 6-11

6.3

Operating Image Panel

Item

Rotate Page

Move Page

Description

Press this button to rotate the selected page.

The allowable rotation angles are left 90 degrees, right 90 degrees, and 180 degrees.

Press this button to change the order by moving the selected page.

While checking the thumbnail images, you can select the moving position.

Document/Page - Combine Documents

Combine selected multiple documents. You can use [Move] to change the combination order.

6

Reference

-

-

-

You can only select either [Print] or [Destination List] as a destination of a combined document.

Up to 10 documents can be combined at one time.

You cannot combine a scanned document with a document retrieved from a User Box.

bizhub C652/C652DS/C552/C552DS/C452 6-12

6.3

Operating Image Panel 6

Document/Page - Document Settings

Configure settings for sending the selected document.

You can change the resolution of the document, file type, and color setting.

Reference

-

-

If you have selected multiple documents, the document setting function is not available.

If you have selected a document retrieved from an external memory, the document setting function is not available.

Item

Resolution

File Type

Color

Description

Select the scan resolution from [Settings when saving], [200 e 100dpi (Standard)], [200 e 200dpi (Fine)], [300 e 300dpi], [400 e 400dpi (Super Fine)] and [600 e 600dpi (Ultra Fine)].

Select the file format for sending data from [PDF], [Compact PDF], [TIFF],

[JPEG], [XPS] and [Compact XPS].

Select whether to save the whole scanned pages as one file, or to divide a file in specified number of pages in order to save data. You cannot select [Multi

Page] if [JPEG] is selected for file type.

To send divided files by attaching them to an E-mail, specify "E-mail Attachment Method". Select [All Files Sent as one (1) E-mail] to attach all divided files to one E-mail message. Select [One (1) File per E-Mail] to send E-mail messages for each divided file.

Selecting [Compact PDF] for file type allows you to specify [Outline PDF].

If either i-Option LK-102 or i-Option LK-103 v2 is registered in the MFP, selecting [PDF]or [Compact PDF] for file type allows you to specify [Encryption] and

[PDF Document Properties]. For details on the function, refer to page 7-2.

If i-Option LK-105 is registered in the MFP, selecting [PDF]or [Compact PDF] for the file type allows you to specify [Searchable PDF]. For details on the func-

tion, refer to page 8-2.

Select the scan color for sending data from [Use Existing Color Setting], [Full

Color], [Gray Scale] and [Black].

Return to Scan Dest.

Press [Return to Scan Dest.] to restore the selected document to the source location.

-

-

The scanned document is deleted from the MFP.

The document retrieved from a User Box is restored to the source User Box.

bizhub C652/C652DS/C552/C552DS/C452 6-13

6.3

6.3.5

Operating Image Panel 6

Specifying a destination

Specify a destination of the read document.

Printing

Press [Print] to print data directly from the MFP. Configure the print settings, and then press [OK].

Reference

-

-

-

If you have scanned multiple documents, the print setting function will not be available.

When you print a combined document, [Combine] and [Zoom] are not available.

-

-

-

When printing a document with an embedded password using the password copy function, you cannot specify [Combine] or [Zoom]. For details on the password copy function, refer to the "User's Guide

Copy Operations".

When you print a document that has been retrieved from an external memory, [Use Existing Color Setting], [Combine] and [Zoom] are not available.

When you print a document of JPEG, XPS, or Compact XPS format that has been retrieved from an external memory, [2-Sided] is not available. Also, Staple and Punch are not available for the [Finishing] setting.

When printing data saved in a cellular phone or PDA, you can only check the print settings. To change print settings, select [User Settings]ö[Cellular Phone/PDA Setting]ö[Print].

Item

Copies:

Print

Color

Finishing

Combine

Zoom

Continuous Print

Description

Specify the number of copies to be printed using the Keypad.

Select whether to print in 2-sided mode.

Specify whether to print originals in color or black-and-white.

Press this button to configure settings for collating, grouping, stapling, or hole punching.

Press this button to specify whether to combine pages.

Multiple pages of a document can be combined and printed on a single page.

Press this button to specify a zoom ratio for the document.

This function is available when printing combined documents in the 2-sided print mode.

Multiple document are printed continuously when they are combined. When printing in 2-Sided mode, and the document ends on the front side of a sheet of paper, select whether to start printing of the next document on the back side of the sheet or on the front side of a new sheet.

Reference

-

-

The setting value of [Finishing] varies depending on which option is installed.

The Staple settings are available only if the optional finisher is installed.

The Punch settings are available only if the punch kit is installed on the optional finisher.

[Continuous Print] is displayed when multiple documents are combined using the editing tool, and then

[Print] is selected as a destination.

bizhub C652/C652DS/C552/C552DS/C452 6-14

6.3

Operating Image Panel 6

Specifying destinations

From [Destination List], select an address to which you want to send a document.

Press the [Search] tab to reference one-touch destinations registered in the main unit. Press the [Group] tab to reference the group list registered in the main unit.

-

-

Reference

If you have read multiple documents, the User Box function will not be available.

-

-

If My address function is available, pressing [My Address] allows you to view My Address Book. For

details on the My Address function, refer to page 10-2.

If you have specified an address, you can check the send tray by pressing [Verify Address Tray/ Remote

Address Setting].

E-mail addresses for which a certificate is registered are displayed with a key icon.

You can only specify User Boxes as an address book destination of a document retrieved from an external memory or a document saved in a cellular phone or PDA.

Saving a document in an external memory

Select [External Memory] from [Destination List], and press [OK].

Reference

To save data in an external memory, in [Administrator Settings]ö[System Settings]ö[User Box Settings]ö[External Memory Function Settings], set [Save Document] to [ON]. To additionally perform user authentication, in [Administrator Settings]ö[User Authentication/ Account Track]ö[User Authentication Settings]ö[User Registration], set [Function Permission]ö[Save to External Memory] to [Allow] for each user.

If [Print] or a destination is specified as a destination, you cannot select [External Memory].

bizhub C652/C652DS/C552/C552DS/C452 6-15

6.3

6.3.6

Operating Image Panel 6

Checking the send tray

Send Tray

If you specify an address, the send tray appears. The send tray displays the icon for the destination you have specified.

1

2

No.

1

Name

Dest. Settings icon

2 Destination icon

Description

Press the Dest. Settings icon to display the Check Send To screen, where you can check the list of specified destinations.

Displays the icons for destinations.

Press the icon for the desired destination to display the Check Send To screen, where you can check the detail information of the destination.

Check TX Tray

Press the icon of the send tray to display the Check Send To screen, where you can check the list of specified destinations.

If an E-mail address is specified as a destination, you can specify settings for the E-mail encryption and digital signature attachment.

Item

Remote Address Settings

Detail

Description

Press this button to configure settings for E-mail encryption based on S/MIME and digital signature attachment.

This setting is available when [ON] is selected for [S/MIME Communication

Settings] of [Administrator Settings], and E-mail is selected.

Press this button to check the detailed information of the address.

bizhub C652/C652DS/C552/C552DS/C452 6-16

6.3

Operating Image Panel 6

Item

Delete

Description

Press this button to delete the selected address.

Reference

To encrypt an E-mail message and attach a digital signature using S/MIME, set [Administrator Settings]ö[Network Settings]ö[E-Mail Settings]ö[S/MIME Communication Settings] to [ON].

To encrypt an E-mail, a certificate must be registered in the E-mail address.

To attach a digital signature to an E-mail message, the device certificate must be registered in the MFP.

Also, set [Administrator Settings]ö[Network Settings]ö[E-Mail Settings]ö[S/MIME Communication

Settings]ö[Digital Signature] to [Always add signature] or [Select when sending]. For details, refer to the "User's Guide Network Administrator".

6.3.7

Sending data from a cellular phone or PDA

Selecting a destination and pressing [Start] displays the PIN code on the Control Panel.

Specify the data you want to use and the MFP to send data in the cellular phone or PDA. Then enter the PIN code to send data to the MFP.

-

-

Reference

You can only specify either [Print] or a User Box as a destination for sending data from a cellular phone or PDA. Also, you can specify only one User Box as a destination. To save a document in a User Box, you must create a User Box and register the User Box in the address book in advance.

For details on how to create a User Box, refer to the "User's Guide Box Operations".

For details on how to register a destination to the address book, refer to the "User's Guide Network

Scan/Fax/Network Fax Operations".

For the operation of a cellular phone or PDA, refer to the operation manual of the cellular phone or PDA.

-

The communication speed may be reduced or communication may be interrupted by obstacles, signal quality, magnetic field or static electricity.

Documents and image data may not be sent correctly depending on the security setting of the cellular phone or PDA.

bizhub C652/C652DS/C552/C552DS/C452 6-17

6.4

6.4

Registering a photo in the address book

Registering a photo in the address book

From the Web browser on your computer, you can use PageScope Web Connection to add photo data to registered one-touch destinations.

The registered photo data is applied to the [Destination List] of Image Panel.

6

6.4.1

d

Reference

For details on PageScope Web Connection, refer to the "User's Guide Network Administrator".

Specifications of photo data

The specifications for registerable photo data are as shown below.

Item

File Type

Image size

Data size

Specifications

BMP format, 24-bit color, uncompressed

48 e 48 pixels

6,966 bytes

Reference

Photo data is not enlarged or reduced during photo data registration process.

bizhub C652/C652DS/C552/C552DS/C452 6-18

6.4

6.4.2

Registering a photo in the address book

Registering photo data

Register photo data by operating PageScope Web Connection from the Web browser on your computer.

Reference

-

-

-

To add photo data to the address book, you must register one-touch destinations in advance.

When the My Address function is available, you can add photo data to one-touch destinations in My

Address Book.

Photo data can be registered in My Address Book only when you log in as a registered user.

1

Log in to the user mode or administrator mode.

2

Select "Store Address".

3

Select "Photo/Icon".

6

4

Select the one-touch destination to which you want to add photo data, and then click [Edit].

% When the photo data is registered, "Photo/Icon" is displayed in "Photo".

bizhub C652/C652DS/C552/C552DS/C452 6-19

6.4

Registering a photo in the address book

5

Select "Register Photo".

6

6

Click [Browse], and then specify the folder where the photo data you want to add is saved.

7

Press [OK].

The photo data is added to the one-touch destination.

bizhub C652/C652DS/C552/C552DS/C452 6-20

6.5

6.5

Customizing Image Panel 6

Customizing Image Panel

When the My Panel and My Address function are available, you can customize the Image Panel screen as a user-specific screen.

To customize the Image Panel screen, the following conditions are required.

The My Panel and My Address functions are available on the MFP.

Perform user authentication, and then log in as a registered user.

d

Reference

For details on the My Panel function, refer to page 9-2.

For details on the My Address function, refer to page 10-2.

6.5.1

Customizing the Read Data area

Shortcut icons for frequently used User Boxes can be registered in the Read Data area.

1

In "Data Source", press [Document Source List].

2

Press [Customize Basic Screen].

3

Select the User Box you want to register in the basic screen, and select the location in the Read Data area.

% If you have selected a location that is already registered in the basic screen, the data is overwritten.

% You cannot register a User Box that is already registered in the basic screen to another location in the basic screen.

bizhub C652/C652DS/C552/C552DS/C452 6-21

6.5

Customizing Image Panel

4

Press [OK].

6.5.2

A shortcut icon is registered.

Customizing the Document Destination area

Shortcut icons for frequently used destinations can be registered in the Document Destination area.

1

Press [Destination List] in the "Data Destination" area.

2

Press [Customize Basic Screen].

6

3

Select the destination you want to register in the basic screen, and select the location in the Document

Destination area.

% If you have selected a location that is already registered in the basic screen, the data is overwritten.

% You cannot register a destination that is already registered in the basic screen to another location in the basic screen.

bizhub C652/C652DS/C552/C552DS/C452 6-22

6.5

Customizing Image Panel

4

Press [OK].

6.5.3

A shortcut icon is registered.

Deleting a registered shortcut icon

1

Press [Customize Basic Screen].

2

Select an icon you want to delete.

3

Press [Delete].

4

Press [OK].

The shortcut icon is deleted.

6

bizhub C652/C652DS/C552/C552DS/C452 6-23

7

PDF Processing Function

7.1

Overview 7

7

7.1

PDF Processing Function

Overview

The PDF processing function allows you to specify the security level for distributing a scanned document and a document saved in a User Box, such as by encrypting a document or adding a digital signature as required.

Reference

This function can be used on the MFP with i-Option LK-102 or i-Option LK-103 v2 registered.

Available operations with the PDF processing function

-

-

The PDF processing function allows you to perform the following operations.

Configuring the PDF document property settings when distributing it with the scan or User Box function

(p. 7-3).

Encrypting a PDF document using a password or digital ID (public key) when distributing it with the scan

or User Box function (p. 7-4).

Adding a digital signature when distributing an encrypted PDF document (p. 7-4).

An AES-encrypted PDF document can be printed using the direct print mode (p. 7-7).

d

Reference

For details on the scan function, refer to the "User's Guide Network Scan/Fax/Network Fax Operations".

For details on User Box functions, refer to the "User's Guide Box Operations".

bizhub C652/C652DS/C552/C552DS/C452 7-2

7.2

7.2

PDF document properties 7

PDF document properties

Selecting [PDF] or [Compact PDF] as a file type when distributing a scanned document or document saved in a User Box allows you to configure the PDF document property settings.

Reference

When saving a document in a User Box using [Save Document] of the User Box function, you cannot configure the PDF document property settings.

When sending a document in a User Box in the PDF format to other device using PageScope Web Connection, you can configure the PDF document property settings.

Item

Title

Apply file name.

Author

Subject

Keywords

Description

If [No] is selected for "Apply file name.", specify the title of the PDF document

(up to 64 characters).

Specify whether to apply the file name as the name of the PDF document.

Enter the author of the PDF document (up to 64 characters).

When user authentication is performed, the login name is entered as the author name.

Enter the sub-title of the PDF document (up to 64 characters).

Enter the keywords of the PDF document (up to 64 characters).

bizhub C652/C652DS/C552/C552DS/C452 7-3

7.3

7.3

Encrypting PDF document and adding digital signature 7

Encrypting PDF document and adding digital signature

Selecting [PDF] or [Compact PDF] as a file type when distributing a scanned document or document saved in a User Box allows you to enhance security for the PDF document by encrypting it using a password or the digital ID of a user (public key).

When a device certificate is registered in the MFP, a PDF document can be distributed with a digital signature added. Adding a digital signature certifies the author (MFP) of the sent document and guarantees that the document has not been modified after being signed.

Reference

Using PageScope Web Connection, you can encrypt and add a digital signature to send a document in a User Box to another device in the PDF format.

To add a digital signature, it is necessary to encrypt the PDF document using a password or digital ID.

7.3.1

Password-based encryption

To encrypt a document using a password, configure the following settings.

Item

Encryption Target

Encryption Type

Signature

Encryption Level

Password

Document Permissions

Description

Select an encryption target.

Selecting [Other than Metadata] excludes the item specified in [PDF Document

Properties] from the encryption target.

Selecting [Other than Metadata] does not allow you to select [Low Level] for

Encryption Level.

Select [Password].

When a device certificate has been registered in the MFP, specify whether to add a digital signature.

For details on registering a device certificate in the MFP, refer to the "User's

Guide Network Administrator".

Select an encryption level.

• [Low Level]: RC4 encoding method (40-bit key length), supported by Acrobat 3.0 or later

• [High Level 1]: RC4 encoding method (128-bit key length), supported by

Acrobat 5.0 or later

• [High Level 2]: AES encoding method (128-bit key length), supported by

Acrobat 7.0 or later

Enter the password required to open a PDF document.

Enter the password twice for confirmation.

Enter the password required to change the document permissions. Enter the password twice for confirmation. You cannot use the same password as that specified in [Password].

After you have configured document permissions, press [Detail Settings] to configure the detailed permission settings. The set values vary depending on the encryption level.

bizhub C652/C652DS/C552/C552DS/C452 7-4

7.3

Encrypting PDF document and adding digital signature

[Detail Settings]

Item

Printing Allowed

Description

Specify whether to permit printing of a PDF document.

[Low Resolution] is selectable when [High Level 1] or [High Level 2] is selected for Encryption Level.

Specify whether to enable copying of text, images and other content.

Enable copying of text, images and other content

Changes Allowed Specify the permission level related to making changes to a PDF document.

• Select [Inserting, deleting and rotating pages] to insert, delete or rotate the page. Configure this setting for encryption at a higher security level.

• Select [Filling in form fields and signing.] to enter information in the form and add a digital signature. Configure this setting for encryption at a higher security level.

• Select [Commenting, filling in form fields and signing] to add comments, enter information in the form and add a digital signature.

• Select [Page layout, filling in form fields and signing.] to insert, delete or rotate the page, enter information in the form and add a digital signature.

Configure this setting for encryption at a lower security level.

• Select [Any except extracting pages] to edit a document, create the form field and enter information to it, add comments, and add a digital signature.

7

7.3.2

Digital ID-based encryption

To encrypt a document using the digital ID of a user, configure the following settings.

Item

Encryption Target

Encryption Type

Signature

Description

Select an encryption target.

Selecting [Other than Metadata] excludes the item specified in [PDF Document

Properties] from the encryption target.

Select [Digital ID].

Select [Digital ID] to display the screen for selecting destinations. The screen for selecting an address displays a list of E-mail addresses with registered digital IDs for S/MIME sending. Specify a digital ID to be used for encryption by selecting an E-mail address.

Selecting [Same as destination] uses the digital ID of the address; you do not need to specify a digital ID on this screen.

Specification of the digital ID is independent of specification of an address; therefore, you need to specify an address separately.

When a device certificate has been registered in the MFP, specify whether to add a digital signature.

For details on registering a device certificate in the MFP, refer to the "User's

Guide Network Administrator".

bizhub C652/C652DS/C552/C552DS/C452 7-5

7.3

Encrypting PDF document and adding digital signature

Item

Encryption Level

Description

Select an encryption level. To encrypt a document using a digital ID, you cannot select [Low Level] for Encryption Level.

• [High Level 1]: RC4 encoding method (128-bit key length), supported by

Acrobat 5.0 or later

• [High Level 2]: AES encoding method (128-bit key length), supported by

Acrobat 7.0 or later

7

[Detail Settings]

Item

Printing Allowed

Enable copying of text, images and other content

Changes Allowed

Description

Specify whether to permit printing of a PDF document.

Specify whether to enable copying of text, images and other content.

Specify the permission level related to making changes to a PDF document.

• Select [Inserting, deleting and rotating pages] to insert, delete or rotate the page. Configure this setting for encryption at a higher security level.

• Select [Filling in form fields and signing.] to enter information in the form and add a digital signature. Configure this setting for encryption at a higher security level.

• Select [Commenting, filling in form fields and signing] to add comments, enter information in the form and add a digital signature.

• Select [Page layout, filling in form fields and signing.] to insert, delete or rotate the page, enter information in the form and add a digital signature.

Configure this setting for encryption at a lower security level.

• Select [Any except extracting pages] to edit a document, create the form field and enter information to it, add comments, and add a digital signature.

-

-

-

-

-

Reference

Digital ID-based encryption requires registering the certificate of a user in an E-mail address in advance.

For details on registering the certificate of a user in an E-mail address, refer to the "User's Guide Network Administrator".

You can specify up to 100 digital IDs.

The specifiable digital ID depends on the apply level of a user.

When saving a PDF document in a User Box, you cannot encrypt it using a digital ID.

When encrypting a PDF document and creating a searchable PDF document at the same time, the following settings are not available if [Adjust Rotation] is set to [Adjust] in the searchable PDF setting.

"Encryption Type": [Digital ID]

"Encryption Level": [High Level 2]

"Encryption Target": [Other than Metadata]

"Signature": [Yes]

For details on the searchable PDF function, refer to page 8-2.

bizhub C652/C652DS/C552/C552DS/C452 7-6

7.4

7.4

Direct Print 7

Direct Print

An AES-encrypted PDF document can be printed in the direct print mode.

User PageScope Web Connection to print documents in the direct print mode. Log in as a public user or registered user, and then select "Direct Print".

Click [Browse] to locate the file, and then click [OK].

d

Reference

For details on PageScope Web Connection, refer to the "User's Guide Print Operations".

bizhub C652/C652DS/C552/C552DS/C452 7-7

8

Searchable PDF function

8.1

Overview 8

8

8.1

Searchable PDF function

Overview

Searchable PDF refers to a function that creates a text searchable PDF file by pasting transparent text data on the area of a document in which characters are recognized through an OCR process.

You can create a searchable PDF file when saving or sending an original in the PDF or compact PDF format using the scan or User Box function. The searchable PDF function supports multiple languages. When creating a searchable PDF file, select an appropriate language according to the original for correct OCR processing. Also, you can improve the accuracy of OCR processing by automatically correcting the page direction.

If you want to manage paper-based documents in electronic format, it will be convenient to use the searchable PDF function to convert documents into a text-searchable PDF file.

Reference

This function is available when i-Option LK-105 is registered with the MFP.

-

-

For details on the scan function, refer to the "User's Guide Network Scan/Fax/Network Fax Operations".

For details on User Box functions, refer to the "User's Guide Box Operations".

Precautions when creating searchable PDF files

Depending on the original condition, there may be some problems recognizing the text, the text may become garbled, or other problems may arise.

Example

-

-

-

The characters that the MFP does not support will not be correctly recognized.

If any language different from that used in the original is selected when creating a searchable PDF file, text will not be correctly recognized.

If the page direction is not set to be corrected automatically, and the direction of the specified original does not match the direction of the text, text will not be correctly recognized.

d

Reference

For details on the setting to automatically correct the page direction, refer to page 8-4.

Recognizable character size

Resolution 200 dpi

300 dpi

Japanese

12 pt to 142 pt

8 pt to 96 pt

European language Asian language

9 pt to 142 pt

6 pt to 96 pt

20 pt to 142 pt

12 pt to 96 pt

Reference

When creating a searchable PDF file, a resolution over 300 dpi cannot be specified for scanning.

bizhub C652/C652DS/C552/C552DS/C452 8-2

8.2

8.2

Configuring the OCR operation setting 8

Configuring the OCR operation setting

Before creating a searchable PDF file, you can specify whether to give priority to accuracy or speed for OCR processing.

OCR Operation Setting

1

Press [Utility/Counter].

2

Press [User Settings].

3

Press [Scan/Fax Settings].

4

In [Scan/Fax Settings] (2/2), press [OCR Operation Setting].

5

Select the OCR operation, and press [OK].

% [Prioritize Quality]: Give priority to recognition accuracy of an original text. Also, inclination of the original is adjusted automatically.

% [Prioritize Speed]: Give priority to OCR processing speed. Inclination of the original is not adjusted.

bizhub C652/C652DS/C552/C552DS/C452 8-3

8.3

8.3

Configuring the searchable PDF setting 8

Configuring the searchable PDF setting

You can create a searchable PDF file by selecting [PDF] or [Compact PDF] for file type when saving or sending an original in the PDF format using the Scan and User Box functions.

d

Reference

For details on how to specify the file type when using the Scan function, refer to the "User's Guide Network

Scan/Fax/Network Fax Operations".

For details on how to specify the file type when using the User Box function, refer to the "User's Guide Box

Operations".

Item

Language Selection

Adjust Rotation

Description

Select a language to use to create a searchable PDF file.

Text will not be correctly recognized unless an appropriate language is selected according to the original.

Specify whether to automatically rotate each page to correct it according to the text direction detected through an OCR process.

If the page direction is not corrected automatically, and the direction of the specified original does not match the direction of the text, text will not be correctly recognized.

-

-

Reference

If [Compact PDF] is selected for [File Type] to create a searchable PDF file, the OCR processing speed may be faster than when [PDF] is selected.

-

-

When creating a searchable PDF file, [Resolution] cannot be set to [400 e 400dpi (Super Fine)] or [600 e 600dpi (Ultra Fine)].

To create a searchable PDF file and encrypt a PDF file at the same time, if any of the following settings are specified, [Adjust Rotation] cannot be set to [Adjust] in the PDF encryption setting.

"Encryption Type": [Digital ID]

"Encryption Level": [High Level 2]

"Encryption Target": [Other than Metadata]

"Signature": [Yes]

For details on how to encrypt a PDF file, refer to page 7-4.

For [Japanese], [Chinese], [Korean] and [Taiwanese], the text direction (vertical or horizontal writing) is recognized automatically. However, for [Chinese], [Korean] and [Taiwanese], if both vertical and horizontal text directions are used on the same page, the original is processed based on one or the other.

bizhub C652/C652DS/C552/C552DS/C452 8-4

9

My Panel Function

9.1

Overview 9

9 My Panel Function

9.1

9.1.1

Overview

The My Panel function allows the user to centrally manage the environment of the Control Panel customized by the user according to the application (My Panel), and to obtain My Panel on the MFP selected by the user.

Using My Panel provides the same operationality on multiple MFPs in network environment.

d

Reference

This function is used in connection with the PageScope My Panel Manager. For details on enabling the function, refer to the PageScope My Panel Manager manual.

You can also configure My Panel settings using the PageScope My Panel Manager. For details, refer to the

PageScope My Panel Manager manual.

Available operations with My Panel

My Panel allows you to personalize the Control Panel so that frequently-used functions are preferentially displayed.

Also, if the Web browser or Image Panel is available, by linking it with PageScope My Panel Manager, you can manage the Web browser settings and information for each user, and personalize the Image Panel screen.

Customizable items

-

-

-

-

-

-

-

My Panel allows you to customize the following items.

Specification of a language displayed on the Control Panel

Specification of a measurement unit to be displayed when entering numbers

Initial display settings for the basic screen of the Copy function and registration of short-cut keys and setting value keys to be arranged in the basic screen

Initial display settings for the basic screen of the fax/scan function and registration of shortcut keys

Initial display settings for the basic screen of the User Box function and registration of shortcut keys

Specification of the color of selected buttons of the Control Panel

Display of the My Panel main menu

Display of the initial screen of the Control Panel

Functions available by linking to the Web browser

-

-

-

-

-

You can personalize the operation environment of the Web browser by linking the Web browser with My Panel. My Panel allows you to manage the following settings and information for each user.

Home page

Favorites

Display history of contents

URL input history

Cookie

Authentication information d

Reference

Register a home page and favorites using the Web browser. Display history, input history, cookies, authentication information are automatically stored in the server as the user uses the Web browser. For details on

how to use the Web browser, refer to page 4-2.

You can edit the registration information of a home page and favorites using PageScope My Panel Manager.

For details, refer to the manual.

bizhub C652/C652DS/C552/C552DS/C452 9-2

9.1

Overview 9

Functions available with Image Panel

By linking the Image Panel with My Panel or My Address Book, you can register shortcuts for the document source and destination in the basic screen of Image Panel to personalize the operation environment of Image

Panel. Also, you can refer to My Address Book to specify a destination to send data to.

d

Reference

For details on customizing the Image Panel screen, refer to page 6-21.

For details on the My Address function, refer to page 10-2.

9.1.2

My Panel acquisition procedure

Perform user authentication on the selected MFP. If the user authentication is succeeded, the MFP automatically accesses the server to obtain My Panel of the user who is logged in.

The user can use My Panel while logged in to the MFP. My Panel is not available after the user logs out.

My Panel is available Server

(manages My Panel)

My Panel is available

(3) Obtain My Panel (2) Access the server

My Panel is not available

• Authentication failed

• Log out

• Failed to obtain My Panel,etc.

(1) Perform authentication

9.1.3

Restrictions on using the My Panel function

The following are restrictions on the use of My Panel.

Registering, editing and deleting My Panel are available only for the user who owns the My Panel. The administrator of the MFP cannot operate My Panel.

-

-

When you access My Panel for the first time, the language, measurement unit and color selection settings comply with the settings in the MFP.

When you access My Panel for the first time, the main menu of My Panel is displayed in the initial screen.

-

-

-

Only the setting memory (copy program and fax/scan program) registered on the MFP you use is available.

Depending on the functions or option installation status of the MFP on which My Panel is used, the operating environment specified as My Panel may not be available.

When registering, editing, or deleting My panel, an error may occur depending on the connection status to the server. If an error occurs, check the network connection.

bizhub C652/C652DS/C552/C552DS/C452 9-3

9.2

9.2

Displaying My Panel

Displaying My Panel

9.2.1

9

Main Menu

Main Menu appears first when displaying My Panel.

In Main Menu, you can freely lay out frequently used functions and shortcut keys to the setting memory. In

Main Menu, 12 types of shortcut keys can be registered.

For details on configuring settings for Main Menu, refer to page 9-12.

9.2.2

Displaying Main Menu

When using the My Panel function, you can change the initial screen to be displayed after user authentication is succeeded. To display Main Menu for My Panel from a different initial screen, use the Application Menu.

In Application Menu, press [My Panel] to display Main Menu of My Panel.

d

Reference

The initial screen displayed after user authentication is succeeded can be changed in [My Panel Settings] Set-

tings. For details, refer to page 9-13.

For details on the Application Menu, refer to page 3-3.

bizhub C652/C652DS/C552/C552DS/C452 9-4

9.3

9.3

Customizing My Panel

Customizing My Panel

Customize My Panel in [My Panel Settings] of "Utility".

9.3.1

My Panel Settings

Customizable items are as follows.

Item

Language Setting

Measurement Unit

Settings

Copier Settings

Scan/Fax Settings

User Box Settings

Color Selection Settings

Main Menu Settings

Initial Screen Settings

Description

Select a language to be used on My Panel.

For details, refer to page 9-6.

Select a measurement unit to be used when displaying values on My Panel.

For details, refer to page 9-6.

Specify the initial display settings for the basic screen of the Copy function and register short-cut keys and setting value keys to be arranged in the basic screen.

For details, refer to page 9-7.

Initial display settings for the basic screen of the fax/scan function and registration of shortcut keys

For details, refer to page 9-9.

Configure initial display settings for the basic screen of the User Box function and register shortcut keys.

For details, refer to page 9-11.

Select a color for the selected buttons on My Panel.

For details, refer to page 9-12.

Register the main menu buttons on the Main Menu screen of My Panel.

For details, refer to page 9-12.

Specify the initial screen to be displayed after user authentication is succeeded.

For details, refer to page 9-13.

9

9.3.2

Displaying [My Panel Settings]

When the My Panel function is available, [My Panel Settings] appears in "Utility".

1

Log in as a registered user.

2

Press [Utility/Counter].

3

Press [My Panel Settings].

bizhub C652/C652DS/C552/C552DS/C452 9-5

9.3

Customizing My Panel

The My Panel Settings screen appears.

9.3.3

Language Setting

Select a language to be used on My Panel from the languages available on the MFP.

9

9.3.4

Measurement Unit Settings

Select a length unit to be used on My Panel.

bizhub C652/C652DS/C552/C552DS/C452 9-6

9.3

9.3.5

Customizing My Panel 9

Copier Settings

Specify the initial display settings for the basic screen of the Copy function and register short-cut keys and setting value keys to be arranged in the basic screen.

Default Tab

Configure the default display settings for the basic screen in the copy mode.

[Basic] displays normal basic display.

[Quick Copy] displays the setting items of basic settings screen in a single screen. It can be used to specify multiple setting at one time.

Shortcut Key 1 - Shortcut Key 2

Lay out shortcut keys for frequently used copy application functions on the basic screen.

Up to two shortcut keys can be laid out.

Reference

When the optional Image Controller IC-412 v1.1 is installed, only one shortcut key can be programmed for the basic screen.

bizhub C652/C652DS/C552/C552DS/C452 9-7

9.3

Customizing My Panel 9

Quick Settings 1 - Quick Settings 4

Arrange the setting values of the Copy function and copy program keys in the basic screen.

By arranging the frequently-used setting values and copy program keys in the basic screen, you can configure the copy settings easily only by pressing the key. You can arrange up to four keys.

d

Reference

To arrange a copy program in the basic screen, you must register the copy program in advance. For details on how to register a copy program, refer to the "User's Guide Copy Operations".

Default Tab Density Settings

Place the key to adjust the copy density on the basic screen.

Reference

When placing the density adjustment key on the basic screen, [Quick Settings 3] and [Quick Settings

4] are not available.

bizhub C652/C652DS/C552/C552DS/C452 9-8

9.3

9.3.6

Customizing My Panel

Scan/Fax Settings

Configure initial display settings for the basic screen of the fax/scan function and register shortcut keys.

Default Tab

Configure initial display settings for the basic screen in the fax/scan function.

9

Address Book Index Default

To use the public address book, specify the type of an index to be displayed initially in [Address Book].

By default, [My Address Book] is selected.

d

Reference

For details on the My Address function, refer to page 10-2.

bizhub C652/C652DS/C552/C552DS/C452 9-9

9.3

Customizing My Panel 9

Shortcut Key 1 - Shortcut Key 2

Lay out shortcut keys for frequently used fax/scan application functions on the basic screen. Up to two shortcut keys can be laid out.

Reference

When the optional Image Controller IC-412 v1.1 is installed, only one shortcut key can be programmed for the basic screen.

Default Address Book

Configure settings for the default screen of [Address Book].

Default Address Type

When displaying an address book by address type, specify an address type to be displayed by default.

bizhub C652/C652DS/C552/C552DS/C452 9-10

9.3

9.3.7

Customizing My Panel

User Box Settings

Configure initial display settings for the basic screen of the User Box function and register shortcut keys.

9

Default Tab

Configure the default display settings for the basic screen (after [User Box] is pressed on the Control Panel) in the User Box mode.

Shortcut Key 1 - Shortcut Key 2

Lay out shortcut keys for User Boxes frequently used when using a User Box document on the basic screen.

Up to two shortcut keys can be laid out.

Reference

When the optional Image Controller IC-412 v1.1 is installed, only one shortcut key can be programmed for the basic screen.

bizhub C652/C652DS/C552/C552DS/C452 9-11

9.3

9.3.8

Customizing My Panel

Color Selection Settings

Select a color for the selected buttons on My Panel.

9

9.3.9

Main Menu Settings

Customize the main menu of My Panel.

You can freely lay out frequently used functions and shortcut keys to the setting memory (copy programs and fax/scan programs) in Main Menu.

Main menu button

The shortcut key displayed in Main Menu is called the main menu button, and up to 12 types can be registered.

To register the set memory (copy programs and fax/scan programs) as main menu buttons, press [Icon] to select icons for the setting memory to be displayed on Main Menu.

Registering a main menu button

[Function], [Copy Function Settings], [Scan/Fax Function Settings], [Copy Program Settings], and [Scan/Fax

Program Settings] can be assigned as main menu buttons.

Item

Function

Copy Function Settings

Description

Registers a shortcut key to each of [Copy], [Scan/Fax], [User Box], [Image Panel], and [Web Browser] functions.

Shortcut key for the Web Browser or Image Panel functions can be registered in Main Menu only when its function is enabled.

Register shortcut keys in Copy Function Settings for each of [Color], [Paper

Setting], [Zoom], [Duplex/Combine], and [Finishing].

bizhub C652/C652DS/C552/C552DS/C452 9-12

9.3

Customizing My Panel

Item

Scan/Fax Function

Settings

Copy Program Settings

Scan/Fax Program

Settings

Description

Register shortcut keys in Scan/Fax Function Settings for each of [Scan Settings], [Original Settings] and [Comm. Settings].

Register a shortcut key to the copier setting memory (copy program) registered in the MFP.

Press [Icon] in the Main Menu Settings screen. You can select setting memory icons to be displayed on Main Menu.

The shortcut key for the setting memory is available only on the MFP with the setting memory registered.

For details on registering the copier setting memory (copy program), refer to the "User's Guide Copy Operations".

Register a shortcut key to the fax/scan setting memory (fax/scan program) registered in the MFP.

Press [Icon] in the Main Menu Settings screen. You can select setting memory icons to be displayed on Main Menu.

The shortcut key for the setting memory is available only on the MFP with the setting memory registered.

For details on registering the fax/scan setting memory (fax/scan program), refer to the "User's Guide Network Scan/Fax/Network Fax Operations".

9

9.3.10

Initial Screen Settings

Specify the initial screen to be displayed after user authentication is succeeded. By default, the My Panel main menu is displayed as the initial screen.

Reference

Shortcut key for the Web Browser or Image Panel functions can be registered in the initial screen only when its function is enabled.

bizhub C652/C652DS/C552/C552DS/C452 9-13

10

My Address function

10.1

Overview 10

10 My Address function

10.1

Overview

The My Address function allows the user to centrally manage the personal address book (My Address Book) on the server, and to obtain My Address Book on the MFP selected by the user.

Using My Address Book allows you to use the same address book on multiple MFPs in your network environment without registering addresses individually on each MFP.

d

Reference

This function is used in connection with the PageScope My Panel Manager. For details on enabling the function, refer to the PageScope My Panel Manager manual.

You can also add entries to My Address Book using PageScope My Panel Manager. For details, refer to the

PageScope My Panel Manager manual.

10.1.1

Classification of address books

When the My Address function is available, you can use the following two kinds of address books.

Public address book

Public address book refers to an address book accessible to anyone registered in the main unit of the MFP selected by the user.

-

-

The public address book is provided with the following features.

-

-

In the public address book. one-touch destinations, groups, and programs can be registered.

Since the public address book is registered in the main unit of the MFP, available destinations depend on the selected MFP.

The user or administrator can register, edit, or delete the public address book.

If registration and editing of destinations by a user is restricted by the administrator, registration or editing of the public address book is not possible.

My Address Book

My Address Book refers to a server-managed address book accessible only to the user.

My Address Book is provided with the following features.

-

-

-

In My Address Book, one-touch destinations and groups can be registered.

Since the My Address function is obtained from the server on the MFP selected by the user, it is available on any MFP in which the My Address function is available.

Only the specified user can register, edit or delete My Panel.

10.1.2

My Address Book acquisition procedure

Perform user authentication on the selected MFP. If the user authentication is succeeded, the MFP automatically accesses the server to obtain My Address Book of the user who is logged in.

The user can use My Address Book while logged in to the MFP. My Address Book is not available after the user logs out.

bizhub C652/C652DS/C552/C552DS/C452 10-2

10.1

Overview

My Address Book is available Server

(manages My Address Book)

10

My Address Book is available (3) Obtain My Address Book

(2) Access the server

My Address Book is not available

• Authentication failed

• Log out

• Failed to obtain My Panel, etc.

(1) Perform authentication

10.1.3

Restrictions on using the My Address function

-

-

-

There are following restrictions on My Address Book.

Only the user who owns My Address Book can register, edit or delete My Address Book. The administrator of the MFP cannot operate My Address Book.

-

-

-

My Address Book can contain up to 100 one-touch destinations and up to 10 groups (up to 100 onetouch destinations per group).

If the number of registered destinations in My Address Book exceeds the maximum value, a new destination cannot be registered.

Program cannot be registered in My Address Book.

Destination search by index is not possible in My Address Book.

User Box is available only on the MFPs with registered destinations.

-

Depending on the MFP settings or options installed in the MFP on which My Address Book is used, sending that has been specified in the address book may not be performed.

When registering, editing, or deleting My address book, an error may occur depending on the connection status to the server. If an error occurs, check the network connection.

bizhub C652/C652DS/C552/C552DS/C452 10-3

10.2

Registering and editing a destination 10

10.2

Registering and editing a destination

-

-

Register frequently used personal addresses in My Address Book. Addresses can be registered using any of the following methods.

Using the Control Panel of the MFP

Using PageScope Web Connection from a computer on the network

Using the PageScope My Panel Manager

In My Address Book, one-touch destinations and groups can be registered. This section describes how to register addresses from the Control Panel of the MFP.

10.2.1

Address Book

Frequently used fax numbers and E-mail addresses, and registered User Boxes can be registered as onetouch destinations. Up to 100 one-touch destinations can be registered in My Address Book.

1

Log in as a registered user.

2

Press [Utility/Counter].

3

Press [One-Touch/User Box Registration].

4

Press [Create One-Touch Destination].

5

Press [Address Book (Personal)].

% To add one-touch destinations to the shared address book, press [Address Book (Public)].

A list of personal one-touch destinations appears.

6

Press [New].

% To edit a registered destination, select the destination, and then press [Edit].

% To delete a registered address, select the destination, and then press [Delete].

% To check a registered address, select the address, and then press [Check Job Set.].

bizhub C652/C652DS/C552/C552DS/C452 10-4

10.2

Registering and editing a destination 10

7

Select the type of address to be registered, and then configure settings for required items.

d

Reference

For details of the address book entries, refer to the "User's Guide Network Scan/Fax/Network Fax Operations".

10.2.2

Group

Multiple one-touch destinations in My Address Book can be grouped, and registered as a group. In My Address Book, up to 10 groups (up to 100 one-touch destinations per group) can be registered.

1

Log in as a registered user.

2

Press [Utility/Counter].

3

Press [One-Touch/User Box Registration].

4

Press [Create One-Touch Destination].

5

Press [Group].

A list of groups appears.

6

Press [Personal], and then press [New].

% To edit a registered group, select the group, and then press [Edit].

% To delete a registered group, select the group, and then press [Delete].

% To check a registered group, select the group, and then press [Check Job Set.].

% Press [Public] to display the public groups.

bizhub C652/C652DS/C552/C552DS/C452 10-5

10.2

Registering and editing a destination 10

7

Check that a personal group is selected as a registration destination, and then configure settings for required items.

% Select [Select Group]. The addresses registered in My Address Book are displayed. Select onetouch destination to be grouped.

d

Reference

For details on registration contents of the group, refer to the "User's Guide Network Scan/Fax/Network Fax

Operations".

bizhub C652/C652DS/C552/C552DS/C452 10-6

10.3

Copying destinations between address books 10

10.3

Copying destinations between address books

Registered one-touch destinations can be copied between the public address book and My Address Book.

Reference

Groups cannot be copied between the public address book and My Address Book.

10.3.1

Copying destinations from the public address book to My Address Book

Addresses registered in the public address book can be copied to My Address Book.

1

Display [Create One-Touch Destination].

2

Press [Address Book (Public)].

3

Select the type of address to be copied.

A list of registered address books of the selected address type appears.

4

Select an address to be copied, and then press [Copy to Personal Addr.].

5

Select [Yes] on the confirmation screen, and then press [OK].

The selected address is copied.

bizhub C652/C652DS/C552/C552DS/C452 10-7

10.3

Copying destinations between address books

10.3.2

Copying destinations from My Address Book to the public address book

Destinations registered in My Address Book can be copied to the public address book.

1

Display [Create One-Touch Destination].

2

Press [Address Book (Personal)].

A list of personal one-touch destinations appears.

3

Select an address to be copied, and then press [Copy to Shared Addr.].

10

4

Select [Yes] on the confirmation screen, and then press [OK].

The selected address is copied.

bizhub C652/C652DS/C552/C552DS/C452 10-8

10.4

Using My Address Book when sending a document 10

10.4

Using My Address Book when sending a document

Use My Address Book to specify a destination when sending a document using the Scan/Fax functions, or sending a document in a User Box.

10.4.1

Specifying destinations

When the My Address function is available, the following screen appears when specifying an address.

Addresses registered in My Address Book appears by address type. Select the desired destination.

To select an address registered in the public address book, press [Public].

10.4.2

Searching for destinations

If a desired address is not found, you can search for it. In the screen for specifying a destination, press

[Search].

To search for destinations based on the registered address type, press [Address Type].

To search for destinations based on the name and a part of registration contents, press [Detail Search].

bizhub C652/C652DS/C552/C552DS/C452 10-9

11

Index

11.1

Index by item 11

11 Index

11.1

Index by item

A

Accessing

....................................................................5-2

Acquiring My Panel

.....................................................9-3

Address book

............................................................10-4

Application key

....................................................3-2

,

3-4

Application menu

........................................................3-3

C

Cache

..........................................................................5-2

Cellular Phone/PDA

.........................................6-10

,

6-17

Customizing

..............................................3-4

,

6-21

,

9-5

D

Deleting

.......................................................................5-9

Display mode of Web Browser

..................................4-10

Displaying

..................................................................4-18

E

Entering text in Web Browser

......................................4-9

External memory

.......................................................6-15

F

Flash Player

.................................................................4-3

G

Group

........................................................................10-5

I

Image Panel

...................................... 2-3

,

6-2

,

6-3

,

6-21

Image Panel operation

................................................6-5

J

Just-Fit Rendering

.....................................................4-10

L

Logging in

....................................................................5-4

Logging out

.................................................................5-4

M

Main Menu

...................................................................9-4

My Address

.......................................................2-3

,

10-2

My Address Book

............................................10-2

,

10-9

My Address Book acquisition

...................................10-2

My Panel

......................................................2-3

,

9-2

,

9-4

My Panel settings

........................................................9-5

O

OCR

.............................................................................8-3

Opening User Boxes

...................................................5-5

Operating Web Browser

..............................................4-9

P

PageScope Web Connection

......................................5-2

PDF processing

.................................................. 2-3

,

7-2

Photo

.........................................................................6-18

PIN code

....................................................................6-17

Print

...........................................................................6-14

Printing

............................................................. 4-17

,

5-7

Public address book

..................................................10-2

R

Restriction of Web browser

.........................................4-5

Restrictions on My Address

......................................10-3

Restrictions on My Panel

.............................................9-3

S

Saving

........................................................................4-19

Scanning

......................................................................6-7

Screen components of Image Panel

...........................6-4

Screen components of PageScope

Web Connection

..........................................................5-3

Screen components of Web Browser

.........................4-8

Searchable PDF

.......................................... 2-3

,

8-2

,

8-4

Send Tray

..................................................................6-16

Smart-Fit Rendering

..................................................4-10

Speaker

.....................................................................4-10

Specifications

................................................... 4-3

,

6-18

Specifications for Web Browser

..................................4-3

T

Toolbar

......................................................................4-11

U

Upload

.......................................................................4-20

User Box

............................................................. 5-5

,

6-8

W

Web Browser

.............................................. 2-3

,

4-2

,

4-4

Web Browser information

..........................................4-16

Web Browser settings

...............................................4-15

bizhub C652/C652DS/C552/C552DS/C452 11-2

11.2

Index by button 11

11.2

Index by button

A

Access log

.................................................................4-16

Address

.....................................................................4-13

Address Book (Personal)

...........................................10-4

Address Book Index Default

.......................................9-9

Application key 1

.........................................................3-2

Application key 2

.........................................................3-3

Application Key Settings

.............................................3-4

Application menu

........................................................3-3

Application menu key

..................................................3-2

Authentication information

........................................4-16

C

Cache

........................................................................4-16

Cellular Phone

...........................................................6-10

Color Selection Settings

............................................9-12

Combine Documents

................................................6-12

Cookie

.......................................................................4-16

Copier Settings

............................................................9-7

Copy to Personal Addr.

.............................................10-7

Copy to Shared Addr.

...............................................10-8

D

Default Address Book

...............................................9-10

Default Address Type

................................................9-10

Default Tab

................................................9-7

,

9-9

,

9-11

Default Tab Density Settings

.......................................9-8

Destination List

..........................................................6-15

Digital ID

......................................................................7-5

Direct Print

..................................................................7-7

Display

.......................................................................4-15

Document Settings

....................................................6-13

Document Source List

.................................................6-8

Document/Page

....................................6-11

,

6-12

,

6-13

E

Encryption

...................................................................7-4

External memory

...............................................6-9

,

6-15

F

Favorites (Add)

..........................................................4-12

Favorites (List)

...........................................................4-12

Function Permission

....................................................4-6

G

Group

........................................................................10-5

H

History

.......................................................................4-13

I

Initial Screen Settings

................................................9-13

L

Language Setting

........................................................9-6

M

Main Menu Settings

...................................................9-12

Manage windows

......................................................4-16

Measurement Unit Settings

.........................................9-6

Menu

..........................................................................4-15

My Panel Settings

........................................................9-5

O

OCR operation setting

.................................................8-3

P

Page Operation

.........................................................4-15

Password

.....................................................................7-4

PDF Document Properties

...........................................7-3

Photo/Icon

.................................................................6-19

Preview

......................................................................6-11

Print

................................................................ 4-14

,

6-14

Proxy

.........................................................................4-16

Q

Quick Settings

.............................................................9-8

R

Return to Scan Dest.

.................................................6-13

S

Scan

............................................................................6-7

Scan/Fax Settings

.......................................................9-9

Security

......................................................................4-16

Settings

.....................................................................4-16

Sheet/Cover/Chapter Insert

......................................6-11

Shortcut key

........................................... 9-7

,

9-10

,

9-11

U

User Box Settings

......................................................9-11

W

Web browser contents access

....................................4-7

Web browser setting

...................................................4-5

bizhub C652/C652DS/C552/C552DS/C452 11-3

http://konicaminolta.com

A1DM-9585AF-00

2009

Copyright

2009.11

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement