Delvcam DELV-SDI-IP monitor User Guide
Below you will find brief information for monitor DELV-SDI-IP. The DELV-SDI-IP monitor is a high-resolution LCD screen designed for professional video production. It features a wide viewing angle, high contrast, and a brightness of 350cd/㎡. The monitor also supports various input signals, including SDI, HDMI, DVI, and VGA. The DELV-SDI-IP monitor can be mounted on a tripod or camera rig, and it accepts both DC 7-24V power input and a variety of battery plates.
Advertisement
Advertisement
Delvcam
DELV-SDI-IP
User Guide
0
IMPORTANT SAFETY INSTRUCTIONS:
Please read User Guide before using this product.
Please keep User Guide for future reference.
Please read the cautions to prevent possible danger and loss of property.
FEATURES:
High resolution: 1280×800;
Wide voltage: DC 7-24V;
High contrast: 800:1;
170°/ 170°(H/V) wide viewing angles, to provide better viewing effect;
Lux Auto Backlight (Optional).
CAUTIONS:
1. Please do not place the display screen towards the ground.
2. Please avoid heavy impact or drop onto the ground.
3. Please do NOT use chemical solutions to clean this product. Please wipe with a clean soft cloth to maintain the brightness of the surface.
4. Please do not block any vent hole.
5. Please follow the instructions and trouble-shootings to adjust the product. Other improper adjustment may result in damage. Any further adjustment must be performed or conducted by a qualified technician.
6. Please unplug the power and remove the battery if long-term no-use, or thunder weather.
Contents
1. PRODUCT DESCRIPTION ...................................................................................................... 2
2. REMOTE CONTROL................................................................................................................ 5
3. DV BATTERY MOUNT PLATE ............................................................................................... 5
4. WIRING INSTRUCTIONS........................................................................................................ 7
5. MENU SETTING........................................................................................................................ 8
6. ACCESSORIES......................................................................................................................... 12
7. PARAMETERS ......................................................................................................................... 13
8. TROUBLE SHOOTING .......................................................................................................... 13
1
YP-01140726
1. PRODUCT DESCRIPTION
1. Auto backlight receiving window (Optional).
2. Infrared signal receiver (work with remote control).
3. Power indicator light (red while standby; green while working).
4. Dial: Turn the dial to adjust volume;
Turn the dial to select menu option and adjust the option value;
Press the dial to confirm.
5. M/EXIT: To activate or exit OSD menu.
6. FN: Image auto capture function under VGA mode;
Underscan function under HDMI mode.
7. INPUT: circularly switch among of AV1, AV2, PC, HDMI, DVI or
SDI.
8. POWER: ON/OFF.
9. Mounting socket.
2
Without SDI:
1. VGA interface.
2. DC 12V power input.
3. HDMI / DVI input interface.
4. I / O control interface.
5. A / V input interface.
6. Earphone jack
7. Speaker
8. VESA Mounting interface.
9. Slide to left to connect power cable
(Connecting with the battery plate).
3
With SDI:
1. VGA interface.
2. Battery power on/off switch: “O” is power off; “|” is power on.
3. DC 12V power input.
4. DC / TALLY connector.
5. HDMI / DVI input interfaces.
6. HDMI output interface.
7. Video output interface.
8. A / V input interface.
9. Earphone jack.
10. SDI output interface.
11. SDI input interface.
12. Speaker.
13. Slide to left to connect power cable (connecting with the battery plate).
14. VESA Mounting interface
4
2. REMOTE CONTROL
1. MUTE
2. Circularly switch among of AV1, AV2, PC, HDMI, DVI or SDI.
3. : Left move Volume down or to adjust the value of setting function.
4. MENU: To activate OSD (on-screen display) menu.
5. POWER: ON/OFF.
6. OK: Enter.
7.
: Right move, Volume up or to adjust the value of setting function.
3. DV BATTERY MOUNT PLATE
Standard mounts process
Following three types of battery plates are suitable for this device, model
F970, QM91D, DU21 & LP-E6 (choose 2 out of 4).
5
MODEL: F-970 MODEL: QM91D
DV Battery Mount Plate:
MODEL: DU21 MODEL: LP-E6
DV Battery Mount Plate Specification:
Model DU21 for battery of Panasonic DV:
NV-GS/PV-GS/DZ-MV/GS/H28/H258/H288GK series, comply with
Panasonic battery DU06/VBD140/SANYO DZhs301sw/Hitachi
DZ-HS303SW/BZ-BP14S/DZ3200/BP07W.
Model QM91D for battery of SONY DV:
DSCR1/F/S/MVCCD/E/HC15E/HC1E/AE1u/DCRTRV828/E/CCD-TRV
116/DCR-DVD/PS105K/300K/10P/1E series.
Model F970 for battery of SONY DV:
DCR-TRV series, DCR-TRV E series, VX2100E PD P series, GV-A700,
GV-D800 FD/CCD-SC/TR3/FX1E/HVR-AIC, HDR-FX1000E, HVR-Z1C,
HVR-V1C, FX7E F330.
Plate Bracket
Model LP-E6 for battery of Canon DSLR:
5D Mark II/5D Mark III/EOS7D/EOS60D;
V-mount battery plate (optional):
Please refer to GP-L130AB type battery specifications.
V-mount Battery Plate
6
Plate Bracket
Anton Bauer mount battery plate (optional):
Please refer to
GP-L130B type battery specifications.
4. WIRING INSTRUCTIONS
I/O control line
Composite cable
Anton Bauer Mount Battery Plate
1. Blue: Video trigger 1
White: audio
Yellow: video 1
Yellow: video 2
A/V signal input
HDMI to HDMI cable
1. HDMI signal input end
2. HDMI signal input connect device with HDMI signal
3. USB port connect computer for touch function (optional)
7
HDMI to DVI cable (optional):
1. HDMI signal input end.
2. DVI signal input connect with device with DVI signal.
3. USB connect with the USB port of computer for touch function
(optional).
5. MENU SETTING
Before setting the functions, please make sure the device is connected correctly.
5-1. Shortcut keys:
5-1-1. the image menu
When power on, Sliding the slider on the device, brightness will appear at the bottom of the screen, then press the slider to select brightness
, sharpness, contrast, saturation, volume, tint. User can adjust the parameters of the selected item with Slide up and down to meet their needs.
5-1-2. FN user-definable function button:
Hold the FN key for 3-5 seconds to pop-up shortcut menu directly. As shown in Figure (default menu button in white font).
Slide up and down to select the desired option.
Finally, press the slider to confirm the selected item as default.
Functions of FN button can also be customized: Center
Marker, Safety Marker, Check Field, Color Bar, Aspect
Ratio, Zoom, Pixel-to-Pixel, Freeze Input, Underscan,
H/V delay.
FN:User-definable function button.
Default function: Aspect Ratio
8
5-2. MENU Operation
When power on, press “M/EXIT” on the device. The menu of function setting will display on the screen.
With slide up and down the slider
to choose menu; then rotate the slider up to confirm; after that, press M/EXIT to return to main menu.
5-2-1. Picture
ITEMS OPTIONS
Color Temp 6500ºK/7300 ºK/9300 ºK/User
R Gain 0 - 255 Note: Available only
G Gain 0 - 255 under “User” mode
B Gain
R Offset
0 - 255
0 - 999 to choose the color value you need.
G Offset 0 - 999
B Offset 0 - 999
9
5-2-2. Marker
ITEMS
Center Marker ON, OFF
OPTIONS
Safety Marker OFF, 95%, 93%, 90%, 88%, 85%, 80%
5-2-3. Display
ITEMS
Aspect Ratio
H/V Delay
Check Field
OPTIONS
Full Screen, 16:9, 4:3, 1.85:1, 2.35:1
OFF, H&V, V, H
OFF, Mono, Red, Green, Blue
Freeze Input OFF, ON
10
5-2-4. PC Adjust
ITEMS OPTIONS
Auto ON
5-2-5. System
ITEMS
Auto Light
Image Flip
OFF, ON
H&V, V, H
OPTIONS
11
6. ACCESSORIES
Standard Accessories:
Optional Accessories:
12
7. PARAMETERS
Panel
Physical Resolution
Brightness
Contrast
Viewing Angle
Input Voltage
Without SDI With SDI
10.1” LED Backlight 10.1” LED Backlight
1280×800 1280×800
350cd/㎡
800: 1
350cd/㎡
800: 1
170°/ 170°(H/V) 170°/ 170°(H/V)
DC 7-24V DC 7-24V
Input Signal
Power Consumption
AV, HDMI, PC or DVI AV, HMDI, PC, SDI or DVI
≤ 10W ≤ 12W
Operating Temperature
0℃~50℃
Storage Temperature
-20℃~60℃
Dimension (LWD)
Weight
0℃~50℃
-20℃~60℃
250×170×32.3mm 250×170×32.3mm
560g 660g
8. TROUBLE SHOOTING
1. Only black-and-white display:
Check whether the color saturation is properly setup or not.
2. Power on but no pictures:
Check whether the cables of AV, HDMI, PC and SDI are correctly connected or not. Please use the standard power adapter coming with the product package. Improper power input may cause damage.
3. Wrong or abnormal colors:
Check whether the cables are correctly and properly connected or not.
Broken or loose pins of the cables may cause a bad connection.
4. When on the picture shows size error:
Press “MENU → DISPLAY → Underscan” to zoom in/out pictures automatically when receiving HDMI signals
5. Other problems:
Please press “ ” button and choose “M/EXIT→SYSTEM→ Reset
→ON”
6. According to the ISP, the machine cannot function properly:
ISP for program upgrades, non-professionals do not use. Please reboot your device if press accidentally!
·It is normal to see some bright lines appear on the screen when turn off the device.
Note: due to constant effort to improve products and product features, specifications may change without notice.
13
14

Public link updated
The public link to your chat has been updated.
Advertisement
Key features
- High resolution: 1280×800
- Wide viewing angles: 170°/ 170°(H/V)
- High contrast: 800:1
- Brightness: 350cd/㎡
- Wide voltage: DC 7-24V
- Supports various input signals: SDI, HDMI, DVI, and VGA