Installation
Installation
Hardware Installation
NOTES
• Make sure you have a personal computer with
an open USB port before connecting the drive
to your computer.
• Power for all device should be turn off before
attaching the cables.
To AC wall outlet.
USB converter cable
Connecting to computer
Connect the drive to the computer as shown in
figure.
Connect the USB converter cable to the
External Super Multi DVD Rewriter.
Connect the other end of the USB
converter cable to your computer.
Connect the AC adapter plug to the
power connector at the rear of the drive.
Attach the AC adapter to the AC wall
outlet.
When the computer is ready, confirm that
the drive is detected. And then, insert the
supplied software CD into the External
Super Multi DVD Rewriter and install the
software.
NOTE
• Please do not connect the AC adapter and
USB 2.0 converter cable by any means other
than specified above.
Location and function of controls
This following is the general figure of the design of the drive.
The drive’s appearance and specifications may change without prior notice.
Front
1. Disc Tray
2. Drive activity indicators
The LED used to indicate the operation of
External Super Multi DVD Rewriter.
3. Emergency Eject Hole
4. Stop/Eject Button
1
2 3
4
Rear
1. USB Connector
This connector is used to connect to the USB
converter cable.
2. Power Connector
This connector is used to connect to the AC
Power adapter cord.
1
2
Removing the USB converter cable
The drive supports the plug and play(not swap) function of Windows, and can be removed and inserted by
performing the following operation.
1. Stop the application software being currently used.
2. Click the icon “
” of the taskbar located on your screen’s bottom right side.
3. Click “Safely Remove USB Mass Storage Device-Drive[x:]”.
4. Click “Ok” and then remove the USB converter cable.
NOTE
Don’t remove the USB converter cable when the busy indicator on the drive blinks, or during computer startup.
Quick Set-up Guide
External
Super Multi DVD Rewriter
GSA-E10N
GSA-E10L
To install of your product, please read this guide manual carefully and completely. For the detailed owner’s manual of the drive,
please refer to the CD manual.
Features
•
•
•
•
•
•
•
*
System Environment
Universal Serial Bus (USB) 2.0 interface for high-speed data transfer.
Buffer Under Run error protection technology
Emergency eject support
Bear media loading with power eject.
Combination of CD-R/RW, DVD-R/RW, DVD+R/RW, DVD+R DL, DVD-R
DL and DVD-RAM drive functions into one drive.
Supports region playback control Phase II.
Supports LightScribe Direct Label Printing Technology - *Optional.
You can use a variety of Drive
Light Scribe
I/F
GSA-E10L
GSA-E10N
USB 2.0 only
X
USB 2.0 only
Package Items
Item
Quantity
- External Super Multi DVD Rewriter
- USB 2.0 converter cable
- AC Power Adapter (with Power supply cable)
- Software CD
- Quick Guide for Drive
1
1
1
1
1
Cautions
System meeting the following requirements is needed in order to use USB
2.0 operation with this drive.
• Computer that is equipped with a USB 2.0 – compliant USB connector or PCI
adapter card, and on which the USB 2.0 EHCI (Enhanced Host Controller
Interface) driver software 1) has been installed.
The USB 2.0 EHCI driver software is supplied with currently available PCI adapter
cards that conform to USB 2.0. Further, Microsoft has released the USB 2.0 EHCI
driver software for Windows XP, therefore it is also possible to use this driver
software with Windows XP.
If you want to know in detail, please contact your USB 2.0 adapter dealer or consult
your PC manufacturer, or consult the Microsoft Corporation Web site.
1)
Computer
This unit can be operated in the system environment explained here.
Pentium III 800MHz or Higher(with USB 2.0) for
basic performance (Recommended for optmal
performance:Pentium IV 2.4GHz or Higher).
Memory 256MB or larger (Recommended: 512MB).
Hard disk
20GB or more free space. (The free space needed
for writing depends on the quantity of data.)
Video Memory
64MB (Recommended: 128MB).
Interface
USB 2.0 port
CD-ROM drive
For Software installation
Software Required
Windows 2000 Professional (SP4)/
OS
Windows XP Home Edition/Professional (SP1,SP2)
Direct X 9.0 or Higher is required
CD-R, CD-RW,
CD-R : LG, Mitsubishi Kagaku Media,
DVD-R, DVD-RW,
Verbatim, Taiyo Yuden or TDK discs are
DVD+R, DVD+RW,
recommended.
DVD-RAM,
CD-RW : LG, Ricoh, Mitsubishi Kagaku Media,
DVD±R DL discs
Verbatim discs are recommended.
DVD-R : Maxell, Mitsubishi Kagaku Media, Taiyo
Yuden are recommended.
DVD-RW : JVC, Mitsubishi Kagaku Media are
recommended.
DVD+R : Mitsubishi Kagaku Media, Verbatim are
recommended.
DVD+RW : Mitsubishi Kagaku Media, Verbatim are
recommended.
DVD-RAM : Maxell, Panasonic are recommended.
DVD±R DL : Mitsubishi Kagaku Media, Verbatim
are recommended.
System
CPU
requirements
* Compatibility problem in write/read function may occur with some media
depending on the media manufacturing quality.
* To achieve maximum Record & Write speed your system may require data to be
copied first to the computer’s hard drive rather than directly from another source
disc or drive.
Specifications
Supported Discs
DVD-ROM(Single/Dual), DVD-RW, DVD-R,
DVD+RW, DVD+R, DVD+R Double layer, DVD-R
Dual layer, DVD- RAM, CD-Digital Audio & CDExtra, CD-Plus, CD-ROM, CD-ROM XA-Ready,
CD-I FMV, CD-TEXT, CD-Bridge, CD-R, CD-RW,
Photo-CD (Single & Multi-Session), Video CD,
DVD-VIDEO
160 x 50 x 230mm
About 1.26Kg
USB 2.0
Dimensions (WxHxD)
Weight
Interface
Read/Write Speed
Write : CD-R: 4X, 8X, 16X, 24X, 32X, 40X, 48X
CD-RW: 4X, 10X, 16X, 24X, 32X
DVD-R: 2X, 4X, 8X, 16X
DVD-RW : 1X, 2X, 4X, 6X
DVD+R: 2.4X, 4X, 8X, 12X, 16X
DVD+RW: 2.4X, 4X, 6X, 8X
DVD-RAM: 2X, 3X, 3X-5X(Ver.2.2), 6x, 6x-8x, 6x-12x
DVD+R DL: 2.4x, 4x, 6x, 8x, 10x
DVD-R DL: 2x, 4x, 6x
Read : CD-ROM/R: 48X max
CD-RW: 40X max
CD-DA(DAE): 40X max
DVD-ROM (Single/Dual): 16X/12X max
DVD+/-RW: 13X max
DVD+/-R: 16X max
DVD-VIDEO: 4.8x max
DVD-RAM: 12X max
DVD±R DL: 12X max
- The maximum data transfer rate varies according to the performance
capabilities of the PC.
- For the sake of periodic improvements, specifications and appearance are
subject to change without notice.
- We have taken all possible measures to assure the quality of our products,
but we cannot be responsible for the consequences if defect occurs.
P/NO. 3828HN1012E
Data transfer rate
Sustained
Average Access
Time (1/3 Stroke)
Buffer capacity
MTBF
Read/Write
Writing Methods
CD-ROM : 7200 Kbytes/s (48X max)
DVD-ROM : 22160 Kbytes/s (16X max)
CD-ROM : 125msec (Typical)
DVD-ROM : 145msec (Typical)
DVD-RAM : 270msec (Typical)
2 Mbytes
125000 Power On Hours (Duty Cycle 10%)
CD-R, CD-RW, DVD-RW, DVD+RW, DVD-RAM,
DVD±R DL
CD:Disc-at-once, Track-at once, Session at once,
Packet Write
DVD:Random write, Sequential write
AC Adapter
100-240Vac, 0.6A 47-63 Hz
12Vdc 2A (max 2.5A)
Power Requirement
Input
Output
Operating Environment
Temperature
5 to 35 degC
Humidity
20 to 80 %
Storage Environment
Temperature
-20 to 55 degC
Humidity
15% to 85% RH
Software
Install the appropriate CD Recording Authoring Software before using this unit.
* Please uninstall any previous CD burning software you may have loaded on your
PC in order to prevent possible compatibility issues.
Once you have installed the application software, you may (if you wish) begin to
reinstall previous software, taking note for errors.
We recommend using the drive with the latest software as some problems
encountered when using the drive can be solved by updating the software.
Please visit www.lgservice.com and install the program,
“LG ODD Online F/W update.” By using the program,
you can automatically check the latest information about
FirmWares and update the FirmWare.
Worldwide support ; http://www.LGservice.com
Worldwide corporate site : http://www.LGE.com
Safety Instructions
PERICOLO : Il dispositivo di lettura e scrittura utilizzato in questo
masterizzatore utilizza un raggio laser che, se osservato da vicino, può
danneggiare la vista. Evitare di smontare il coperchio dell’apparecchio.
Al fine di prevenire eventuali folgorazioni, evitare di smontare
l’apparecchio. All’interno dell’apparecchio non sono presenti parti che
richiedono manutenzione da parte dell’utente. In caso di difetti o guasti,
rivolgersi ad un Centro di Assistenza Tecnica. L’esecuzione di procedure
diverse da quella espressamente indicate in questo manuale può provocare pericolose esposizioni alle radiazioni laser.
CAUTION: The laser used in the External Super Multi DVD Rewriter can
damage your eyes. Do not attempt to open the cover. To reduce the risk
of electric shock, do not remove the cover (or back).
There are no user-serviceable parts inside. Refer servicing to qualified
service personnel. Use of controls or performance of procedures other
than those specified herein may result in hazardous radiation exposure.
WARNING: To reduce the risk of fire or electric shock, do not expose
this appliance to rain or moisture.
ATTENZIONE: Al fine di evitare cortocircuiti o principi di incendio,
evitare di esporre questo apparecchio alla pioggia o ad una eccessiva
umidità ambientale.
VORSICHT : Der in diesem External Super Multi DVD -Laufwerk
benutzte Laser kann Ihre Augen schädigen. Versuchen Sie keinesfalls,
die Abdeckung zu öffnen. Um die Gefahr eines elektrischen Schocks zu
reduzieren, sollten Sie die Abdeckung (oder Rückseite) keinesfalls
entfernen. Im Inneren des Geräts befinden sich keine Teile, die vom
Benutzer selbst gewartet werden können. Überlassen Sie die Wartung
qualifizierten Kundendiensttechnikern. Beachten Sie bei der Benutzung
von Bedienelementen und der Durchführung von Prozeduren unbedingt
die Anweisungen dieses Handbuchs, da andernfalls gefährliche
Strahlung freigesetzt werden kann.
PRECAUCION: El láser utilizado en la unidad External Super Multi DVD
puede dañar sus ojos. No intente abrir la tapa. Para reducir el riesgo de
descarga eléctrica, no quite la tapa (ni la parte posterior).
No hay piezas internas que deba mantener el usuario.
El servicio de mantenimiento debe efectuarlo personal técnico cualificado.
El uso de controles o la ejecución de procedimientos distintos de los
especificados en este manual pueden ser causa de exposición a
radiación peligrosa.
WARNUNG : Setzen Sie das Laufwerk keinesfalls Regen oder
Feuchtigkeit aus, um die Gefahr eines Brandes oder elektrischen
Schocks zu reduzieren.
ADVERTENCIA: Para reducir el riesgo de fuego o descarga eléctrica,
no exponga este aparato a la lluvia ni a la humedad.
ATTENTION: l'exposition au laser utilisé dans le super graveur multi-DVD
présente un danger pour les yeux. N'essayez pas d'ouvrir le capot. Afin de
réduire les risques de chocs électriques, ne retirez pas le capot (ni l'arrière
du dispositif). Aucune pièce interne ne peut être remplacée par l'utilisateur.
Pour la maintenance de l'appareil, adressez-vous au personnel qualifié du
service de maintenance. L'utilisation de commandes ou de procédures
différentes de celles spécifiées ci-après peut entraîner une exposition à
des rayons dangereux.
CUIDADO: O laser utilizado na unidade Super Multi DVD pode causar
lesões oculares. Não tente abrir a tampa. Para reduzir o risco de choques
eléctricos, não retire a tampa (quer frontal quer superior ). A unidade não
contém peças que possam ser reparadas pelo utilizador.
Deixe a manutenção para um técnico da assistência qualificado.
A utilização de controlos ou a execução de procedimentos que não sejam
os especificados neste manual podem causar a exposição a radiações
perigosas.
AVERTISSEMENT :Ne pas exposer ce matériel à la pluie ou à
l’humidité (risques d’incendie et d’électrocution).
This product is manufactured to comply with the radio interference
requirements of EEC DIRECTIVE 89/336/EEC, 93/68/EEC and 73/23/EEC.
Dieses Produkt erfüllt die Funkstörungsanforderungen folgender Normen:
89/336/EEC, 93/68/EEC und 73/23/EEC.
Ce produit a été fabriqué conformément aux prescriptions EEC DIRECTIVE
89/336/EEC, 93/68/EEC et 73/23/EEC.
Questo prodotto risponde alle direttive CEE 89/336, 93/68 e 73/23, relative
alla compatibilità elettromagnetica.
AVISO: Para reduzir o risco de incêndio ou choque elétrico não exponha
este aparelho á chuva ou humidade.
Industry Canada requirement
This class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du
Canada.
FCC COMPLIANCE STATEMENT
Note :
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
- Consult the dealer or an Authorized Service Center for help.
Este producto ha sido fabricado cumpliendo los requisitos sobre interferencias
de radio de la DIRECTIVAS CEE 89/336/CEE, 93/68/CEE y 73/23/CEE.
CLASS 1
KLASSE 1
LUOKAN 1
KLASS 1
CLASE 1
CLASSE 1
LASER PRODUCT
LASER PRODUKT
LASER LAITE
LASER APPARAT
PRODUCTO LÁSER
PRODOTTO LASER
CAUTION : CLASS 3B VISIBLE AND INVISIBLE LASER RADIATION WHEN
OPEN. AVOID EXPOSURE TO THE BEAM.
•
ADVARSEL : KLASSE 3B SYNLIG OG USYNLIG LASERSTRÅLING VED
ÅBNING. UNDGÅ UDSÆTTELSE FOR STRÅLING.
•
ADVARSEL : KLASSE 3B SYNLING OG USYNLIG LASERSTRÅLING NÅR
DEKSEL ÅPENS. UNNGÅ EKSPONERING FOR STRÅLEN.
FCC WARNING
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This Super Multi DVD Drive is for use only with UL listed personal computers
that have installation instructions detailing user-installation of card cage
accessory.
VARNING : KLASSE 3B SYNLING OCH OSYNLIG LASERSTRÅLNING NÄR
DENNAL DEL ÄR ÖPPNAD. STRÅLEN ÄR FARLIG.
■
VARO! : KURSSI 3B NÄKYVÄ JA NÄKYMÄTÖN AVATTAESSA OLET ALTTIINA
LASERSÄTEILYLLE. ÄLÄ KATSO SÄTEESEN.
Microsoft® and Windows® are trademarks registered in the United States
and other countries by the Microsoft Corporation.
■
The company names and product names written in this manual are
trademarks or registered trademarks of the respective companies.
The appliance is not intended for use by young children or infirm persons without
supervision.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement