Manual CMS Pro Manual - The Arco Security Group

Manual CMS Pro Manual - The Arco Security Group
[CMS Pro] Manual
CMS Pro
Manual
[CMS Pro] Manual
1 Introduction
1.1 Summary
CMS Pro has been developed to control the DVR, and various Network Camera’s image
data.
The DVR and IP CAMERA supplier focuses on how many number of screens could be
shown on one screen and how it could be controlled. Thus, Live screen of 16, 32 64 multi
screens could be seen. But we would require thinking about the bandwidth when multi
channels are transmitted.
Central Monitoring System (CMS Pro) could control the image and data by screen and it
shows great countermeasures during emergency by getting screen and urgent data.
Also, it has point of doing efficient control of other remote site’s DVR by central monitoring
system.
The CMS Pro able to do the following functions to able to execute for constructing central
monitoring system.

Unlimited DVR register

Monitoring 128 channels at one screen (1 Screen 64Ch X 2 Screen)

Support up to 2 Multi-Monitors

Live screen display for each screen type

Surveillance functions with E-Map

Device Event and information monitoring at Status Screen

Remote recording and remote backup function

PTZ Control

Event view function
CMS allows user to manage the setup of DVR (System setup / Recording Setup) and
retrieve the recording data of DVR from remote site.
Through E-Map, users can notice Alarm, Events easily and allow control the alarm.
128 channels live monitoring feature provides more powerful centralized management ability
to the observer.
[CMS Pro] Manual
1.2 System Requirements
Items
Minimum Requirements
CPU
Core 2 Duo 2.4GHz or higher
MEMORY
2GB or higher
O/S
Windows XP Professional or higher (32Bit)
Acceleration
DirectX® 8.0 or higher
Resolution
1280 x 1024 as a minimum
Video Card
NVIDIA GeForce 8500 GT 256MB or higher
Network Card
100Base-TX or higher
operation; must match the network configuration
Monitor
1 ea
Items
Recommended Requirements
CPU
Core 2 Duo 3.16GHz or higher
RAM
2GB or higher
O/S
Windows XP Professional or higher (32Bit)
Acceleration
DirectX® 8.0 or higher
Resolution
1280 x 1024 as a minimum
Video Card
NVIDIA GeForce 8500 GT 512MB or higher
Network Card
1000Base-TX (1Gbps) or higher
operation; must match the network configuration
Monitor
1~2 ea
NOTE: Recommended PC specifications for Central Management Software
(CMS Pro).
[CMS Pro] Manual
1.3 Installing Guide

Insert the Installation disk for CMS Pro on the CD / DVD Drive. The following screen
would be appeared by Install Shield Wizard.

Press [Next] button to proceed to next stage.
NOTE: Double click the Setup file on the CD / DVD Drive to start the Install Shield Wizard
if the Auto-Run function does not function, property.

The CMS Pro could be installed as below.

Press the [Close] button, after installation completed
[CMS Pro] Manual
[CMS Pro] Manual
1.4 Reinstalling Guide

If CMS Pro is re-installed on PC, CMS Pro could be installed as below.

When removing all installed features, press [Next] button to proceed to next stage.

If you reinstall CMS PRO version after remove, CMS Pro could be installed as below.

Select [Repair] and [Next] button to proceed to next stage for Successful reinstallation.

After Repairing Visual C++, you have to restart the computer for the changes to be
taken effect.
NOTE: When removing CMS Pro, it couldn’t be removed with Visual C++ at the same time.
[CMS Pro] Manual
1.5 Device Register

Input Username and Password (Default ADMIN / 1234).

Go to “SYSTEM” Tab, and Press “Device” button.
[CMS Pro] Manual

Input the Connection information of DVR.
1) Select “Product” box:
DVR_TYPE1 - MPEG4 DVR, H.264 DVR (NF, HNF)
IP_CAM - IP camera
DVR_TYPE2 - H.264 DVR
2) Input “Group Name” for Devices.(Default : DeviceGroup1)
, otherwise use default Group.
3) Input Device name and IP address of DVR.
4) Input “Port” number (MPEG4, NF: Client port, H.264: web port number of system).
5) Input “User ID”, “Password” of DVR then press “Add” button.
[CMS Pro] Manual
6) DVR register is finished on CMS.
7) User has to check the “connect” option.
8) Press “Close” button.
9) CMS will connect devices automatically.
10) Press “Close” or waiting Close the connection window,

Select “LIVE” Tab.
[CMS Pro] Manual

User will get below screen. (Default Screen in 64ch view)

Now select DEVICE tree on Left window Panel, and expand the tree.

Drag & Drop the CAMERA Item of devices to Right window Panel.

User can below see live images.

User can place a camera at wanted place.

Press “SAVE” button to save current position of camera.
[CMS Pro] Manual
1.6 CMS Pro Display Mode
1. Frame Style Buttons (MS office style look)

User can change the Frame style.
[CMS Pro] Manual
1.7 CMS Pro Main Function
1.7.1

Live
Live image of the registered device could be seen and the multiple screen could be
seen up to 64 multiple screens. Managing (increase/decrease, print, snapshot) each
define image separately by displaying each panel’s image or multi-display of camera
image could be controlled by various screen mode and map image.

Also, it supports real-time event monitoring for suitable event management and it
could control each camera and show animation effect for login history and alarm of
event viewer.
1.7.2
Search

This is the function that retrieves the recording data from local DVR.

User can backup the data, remotely.

User can see the log data of DVR, remotely.
[CMS Pro] Manual
1.7.3
E Map

It is the function that supports the Multi-Display of the screen mode on the map image

Provide control functions for each camera and when event happens on the specified
camera, efficient visual monitoring system, by animation effect and map link.
1.7.4

Status
Show the current status of each DVR which performs in the facility linked with CMS
Pro by icon independent by channel for virtualization and at the same time to be able
to monitor several facilities and all channels at real-time.
[CMS Pro] Manual
1.7.5

Floating
It is the function that monitors several services registered on the CMS at the same
time, using several separate windows. Floating object can be live, map, status and
search.

Support up to 2 Multi-Monitors.
1.7.6

Multi Theme
It is the function that modifies the window screen, according to the user’s taste and it
supports 4 kinds of multi theme.(MS office theme)
[CMS Pro] Manual
2 Registry Setup and Binding Devices
2.1 Live
2.1.1
Summary

User will see live image after selecting Device on CMS Pro.

It is supported to Split Mode, Full Screen Mode and Switch Mode except on basic live
image output, and it is a function to Snapshot, Archiving functions of live image.
2.1.2
Live Screen Switch Mode

User can search remained Live Channel with (<), (>) buttons on [LIVE].

User can automatically as pressing START button, after Auto (sec) setup.
NOTE: Designated Screens are progressed on Switch Mode, step by step.
2.1.3

Live Screen Snap Shot
Live Screen image could be saved as an image file by pressing [LIVE] -> [Snap Shot]
button.
[CMS Pro] Manual
2.1.4

Live Screen Archiving
Live Screen image could be saved as a video (AVI) file by pressing [LIVE] -> [Record
AVI] button.
[CMS Pro] Manual
2.1.5

Live Screen Lay Out
Live Screen could be selected within 14 types.
[1, 4, 6, 7, 8, 9, 10, 12, 13, 16, 21, 29, 36, 64].

Full Screen Mode

64 View Mode
[CMS Pro] Manual
2.1.6
Create a Live Screen

Live Screen mapping is saved as pressing [LIVE] -> [Save] button.

Press [LIVE] -> [Save] button on the CMS Pro menu and the following popup window
could be seen on the CMS.

When pressing “[+]” button, the Group registration screen could be seen as below.
(Default: LiveGroup1)

User can assign several view modes as one group.
[CMS Pro] Manual

Input the name of Live Screen and Select a group, then press “Save” button.

User will get saved item on live screen tree.
2.1.7
Binding devices to Live Screen

Select DEVICE on LEFT window Panel, then expand the tree

Drag & Drop each cameras or camera item from Right window Panel, User can see
camera image on the Live Screen.
[CMS Pro] Manual
NOTE: After pressing “Save” button, Live Screen mapping is saved to first drag & drop
Action.(Device -> Screen)
2.1.8
Mouse menu on Live Screen
Close Channel – Close the selected live channel.
Close All Channels – Close all live channels.
[CMS Pro] Manual
PTZ On/Off – User can use the Device with supporting PTZ by Remote Control.
User can control PTZ camera from remotely.
OSD On/Off – User can on/off the OSD with showing on the screen.
Original Docking State – User can return to window items to original position.
Snap Shot – User can save the present image.
AVI Backup - User can save current live image as an AVI file.
Digital Zoom – User can get digital zoom mode for individual channel.
Print – User can Printout current image.
Screen Division – User can change the Split mode as below.
[CMS Pro] Manual
2.2 Search
2.2.1
Summary

User can see DVR & IP camera recording Data on PC.

Drag & Drop the list of Device tree to Search Screen for Search.

All buttons are not activated before connecting device.
2.2.2
Search Button State

Float : Use to Float Search Screen to another monitor.

Search Forward

Search Backward

Search Stop : User can stop search.

Display with 1/4/9/16 split.

Print button

Snap shot button

Archive button

Open the folder.

Search DVR Log on connection.

Provide right position Timeline.

Panorama mode

Search mode

Draw per minute

Draw per second

Draw per day

Play the 1,2,4,8,16,32,64 times about playback speed.

Play the sound.

New search Screen.
[CMS Pro] Manual
2.2.3
Playback

Move red bar on the timeline and Press “Play”

User can see the recording data on Search Screen as below.
button.
NOTE: Support Panorama Search Function.
CH Selection -> Click Panorama
Button
[CMS Pro] Manual
2.2.4

Press “
2.2.5

Snapshot (BMP, JPG)
snapshot” Screen.
Print
Function to print the selected image from the camera.
[CMS Pro] Manual
2.2.6
Archive

Press the “

User can select video channels and audio for Archiving.

Once all the desired archive setups have been selected, then press “OK” button.

If the “Auto Close” is s selected as an option, the screen will be closed automatically
Archive” button.
after finishing archive.

User can open Save Folder and can see Archived data.
[CMS Pro] Manual
2.2.7
Log

User can search the Log of connecting DVR.

Once all the desired time and filters have been selected, then press “Search” button.

If logs are more than 100 logs, User can move a list by Prev, Next button.

Searched logs could be printed or saved as txt file.
.
[CMS Pro] Manual
2.3 EMAP
2.3.1

Summary
It is a function for efficient central monitoring system by allocating the cameras of the
registered device on the map.
2.3.2

EMAP Screen Popup (Manual / Auto)
Press the [EMAP] -> [Popup] button on selected EMAP Screen, then Mini Live Screen
could be pop-up as double-clicking icon same as below.

The popup screen can be resized as dragging mouse at the edge of screen.
NOTE: User can be popup maximum 8-Emap Event Popup Screens. After the 8 Popup
Screens from the first detected Sensor, the next event Popup after 10 second.
[CMS Pro] Manual
2.3.3

EMAP Linking (Manual / Auto)
Drag & Drop Screen from EMAP Screen tree on selected EMAP Screen, then
generate Yellow Link shape Icon.

Move EMAP Screen as double-click

After pressing the [EMAP] -> [Switch] button, move automatically.

After registering screen of Link icon happens to event, move automatically.
[CMS Pro] Manual
2.3.4
Create a EMAP Screen

Go to “E-Map” Tab, then Press “Save (Screen)” button.

Select a “Group Name” and input the name of EMAP.
(Default: EmapGroup1)
Press the […] button to select an image of map.


User will get the EMAP Screen after pressing “Save” button.
[CMS Pro] Manual
2.3.5
Binding Devices to EMAP Screen

Select DEVICE on LEFT window Panel, then expand the tree.

Drag & Drop the CAMERA ITEM to Right window Panel.

Press “Save” button to fixed items position at the map.
[CMS Pro] Manual
2.4 STATUS
2.4.1

Summary
Show the event (video, audio, alarm) which performs in the facility linked with CMS
Pro by icon independent by channel for virtualization and at the same time to be able
to monitor several facilities and all channels at real-time.
2.4.2

Create a STATUS Screen
Press [STATUS] -> [Save] button to see the Status registration window on CMS Pro.
Press the [+] button as below to see STATUS Group registration screen.

Press the “ADD” button after inputting Group name as below.
(Default: StatusGroup1)
[CMS Pro] Manual

Press “SAVE” button after inputting Screen name as above.

Empty STATUS Screen will be appeared as above.
[CMS Pro] Manual
2.4.3
Bind a STATUS Screen.

Drag & Drop the Devices to Status Screen.

User can display all items of a group at once.
[CMS Pro] Manual
2.4.4

STATUS Screen Event Icon
User can check per Channel Event information after Device Registration as below.
(Motion, Video Loss, Alarm, Audio Event)
2.4.5

STATUS Screen Popup
Click the Channel of registered Device on Status Screen, then User can see Live
Video of selected channel as below.
[CMS Pro] Manual
2.5 System
2.5.1

Summary
It could generally work with Register/Setup/Search on CMS Pro.
2.5.2

System Button State
Register
Device : Register Device for connection.
User : Register User for working CMS Pro.

LIVE Setup
Setup : Set Live Screen setup.

E-MAP Setup
Action Color : Set Event Action Color, UI.

Log
Device : Search DVR Log.
System : Search CMS-Pro Log.
Setup : Set DVR setup by remote.

Archive Setup

NVR
Snapshot Record AVI : Set to work Snapshot, Archiving.
RECORD : Record IP CAMERA up to 4 devices.
[CMS Pro] Manual
2.5.3
Device (Register)

Register the Device.

Add : Register after inputting in setup content.

Modify : Modify selected item.

Delete : Delete selected item.

“Product” Tab.
DVR_TYPE1 - MPEG4 DVR, H.264 DVR (NF, HNF)
IP_CAM - IP camera
DVR_TYPE2 - H.264 DVR
[CMS Pro] Manual
2.5.4
User (Register)

Register User of CMS SW.

By default, the CMS Pro is configured with a user ID of ADMIN, belonging to the
ADMIN group and with a password of 1234.
[CMS Pro] Manual

Input Username, Password, Confirm, Authority, Memo after pressing “ Add” button.

The default “ADMIN” User only can change the password.
[CMS Pro] Manual
2.5.5

Live Setup
Press “Live Setup” button on SYSTEM, then popup Live Screen Setup.
1. Live Setup
1) OSD

Set the OSD items on Screen.

Set the Color on each items.

This OSD setup is only for applying color of OSD not displaying.
2) Event Filter

Set the Event on Live Screen.
3) Event Action

Event Action acts, when events are detected.
4) Sound File

Select Sound File of Event Action.
[CMS Pro] Manual
2.5.6

E-MAP Setup
Press [SYSTEM] -> [E-MAP Setup] button, then user can select wanted Event Action
UI & Color.
2.5.7
Device (Log) -> DVR Log

Function to search event Log as a list from the registered Device

Time : Set the Time.

Device : Select the Device for Search.

Option : Check the Filter for Search.

Print : User can Print log list.

Save as a File
User can Save a list as a file.
[CMS Pro] Manual
2.5.8
System (Log) -> CMS Log

Function to search the Log as a list from the CMS Pro.

Time : Set the Search Time.

Option : Check the divided Options for log search.

Print : User can Print a log list.

Save as a File.
User can Save File, if there is Search content.
Recording Folder is same to Setup Path of [Archive][Archiving].
[CMS Pro] Manual
2.5.9
Remote Setup

Run the Connecting Remote Setup of Connected Device.

Press “Select” button after selecting Device.
2.5.10 Archive Setup (Snapshot / Record AVI)

Set for Archiving.

Path : File Path for Archiving Save

File Size
Set the Maximum Recording Size per file.

As exceeding the setting file size, it could be divided to record as much as setting size.

Set for Snapshot.

Path : File Path for Snapshot Save.
File Type : Select BMP, JPG type.
.
[CMS Pro] Manual
2.5.11 NVR (Register)

Set the Local Record of IP Camera.
Device : Select registered IP Camera.

Folder
Set the Folder for recording video data.
It should have kept at least 1GB.

HDD Size : Set the recording space. (Max 1TB)

File name : Select the recording file name.

Show the progress status with progress bar for making the recording space of
setting content, after pressing “Initialize” button.
[CMS Pro] Manual

User can see completed setting content on left list.

Record the video data on Overwrite mode in real time, before the end of the CMS
Pro.
NOTE: If the NVR button is pressed during connecting devices, the connecting
devices are disconnected automatically.
.
[CMS Pro] Manual

Go to “SEARCH” Tab.

Select DEVICE tree on Left window Panel, and expand RECORD_DEVICE of the tree.

Drag & Drop the IP CAMERA Item to Right window Panel.

User can see recording data on Search Screen.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement