Logicube CellDEK User’s Manual

Below you will find brief information for CellDEK. CellDEK is a forensically sound mobile phone and PDA data extraction tool. This device is designed to extract data from cell phones, Satellite Navigation Devices, PDA’s, SIM cards and flash based media. Data can be extracted from phones and PDAs using three connection methods; data cables, infrared ports or Bluetooth radio frequency communications.

PDF
Document
CellDEK User’s Manual - Logicube | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • Connects to a variety of cellular phones
  • Direct connection via cable, IR or Bluetooth
  • Built-in cellular phone identification module
  • Water-resistant, rugged carrying case
  • Embedded PC with 30GB of storage
  • MD5 Hash to ensure captured data is not tampered with

Frequently asked questions

The CellDEK can be connected to a phone using one of three methods: data cable, infrared port, or Bluetooth.

The CellDEK can be charge with the included AC power supply. The power supply can be plugged into 110 or 230 VAC power.

Slide the power switch in an upwards direction and let it go. CellDEK will initialize and boot-up the CellDEK application.
Preparing document for printing…
0%