Single Channel RGB/DVI/HD Capture Card
Advanced Graphics Display Technology
PCI Express
HD 1080p
HDMI 1080p
DVI - 1920x1200
RGB 2048x1536
The VisionRGB-E1s has a single capture channel supporting
When the RGB/DVI data is displayed on a non Datapath
up to 1920x1080 DVI or 2048x1536 Analog resolution.
graphics card, the VisionRGB-E1s sends the data to system
The VisionRGB-E1s captures the Analog/DVI data and triple
buffers it into onboard storage. This data is then copied
using DMA to the host system for display, storage or
When a Datapath graphics card is used, the VisionRGB-E1s
transfers the data directly to the graphics card thereby
increasing performance. The VisionRGB-E1s sends the
memory or direct to the graphics card, dependant on the
software used for display.
The VisionRGB-E1s is an ideal solution for applications that
require the capture of Analog or DVI sources in real time.
Typical applications include:
Industrial/medical equipment, cameras and other video
relevant portions of each captured image to each display
channel and instructs each channel to use its graphics
Viewing Analog or DVI sources from PCs, MACs,
engine to render the data. This fully utilises the hardware
Streaming video applications
and dramatically increases performance.
Video/Data Wall Controllers
Single channel RGB/DVI/HD capture card (PCI-
For streaming applications, the VisionRGB-E1s can
be used with Windows Media Encoder to compress
Four Lane PCIe interface with a maximum data
rate of 650MB/sec
Maximum DVI capture resolution of 1920 x 1200 x
and stream captured video. To replay the video, use
Windows® Media Player.
Maximum analog RGB capture resolution of 2048 x
1536 x 24bit
HD modes using the supplied DVI/ Component
Any application compatible with Windows®
DirectShow technology can use the VisionRGB-E1s
due to its built-in WDM support.
Adapter or DVI/HDMI Adapter (HDCP not
On card processor for real time mode and sync
The VisionRGB-E1s is supplied with a powerful
software application for configuring the timing and
format of the input sources and displaying the data.
Support for multiple cards allowing up to 32 capture channels. (32 cards)
Simply connect your external DVI or Analog source
Direct DMA driver software and streaming driver
High quality down scaling
automatically detect the video source format and
Support for YUV 4:2:2, RGB 5:5:5, 5:6:5 and 8:8:8
display the captured video in a window on your
video formats
High performance DMA to system memory or
direct to graphics memory with scatter gather
Support for separate H/V sync, Composite sync or
Sync on Green
into the card, run the VisionRGB-E1s application to
VisionRGB-E1s A Single Channel Capture Card,
PLUS 1 x DVI/ VGA, 1 x DVI/compo-
16 cropping windows per capture channel
nent and 1 x DVI/HDMI adapters,
Includes WDM streaming drivers and the Datapath
PLUS 1 x low card bracket
Vision application software
Fully integrated with the Datapath Wall Control-
All products are shipped with the latest software
red software for video wall applications.
available, unless stated otherwise.
VisionRGB-E1s is also optimised for operation with
Special requirements may be organised by contacting
the Datapath range of graphics cards
our Sales team.
Support for Windows® XP/ Vista/ Server 2003/
Server 2008/Windows® 7
Datapath SDK included for software developers
Board Format
PCI-e x4 low profile card, 68.9mm x 167.6mm.
PCI-e bus master with scatter gather DMA providing.
maximum data rate of 650MB/s.
One DVI-I type connector.
Maximum Sample Rate
170Mpixels per second analog RGB or 165 MHz DVI.
Analog modes up to 340MHz pixel clock can be captured using dual-pass
Video Sampling
RGB: 24 bits per pixel / 8-8-8 format.
Video Capture Memory
32 MB, triple buffered.
Analog RGB Mode Support
640x480, 800x600, 1024x768, 1280x1024, 1600x1200, 1920x1080, 2048x1536,
custom modes.
DVI Single Link Mode Support
640 x 480, 800 x 600, 1024 x 768, 1280 x 1024, 1600 x 1200, 1920x1080, 1920 x
1200, and custom modes.
HD Modes
1080p,1080i, 720p, 576p, 576i, 480p and 480i using a Component-DVI connector
(HDCP not supported).
Input Mode Detection
Automatic detection of input modes in hardware, enabling the tracking of mode
changes in the source signal.
Pixel Transfer Formats
RGB: 5-5-5, 5-6-5 or 8-8-8 (24bit/32bit) pixels.
YUV: 4:2:2.
MONO: 8bit.
Update Rate
User defined, captured frame rate will match the source.Providing max data rate
(650MB/s) is not exceeded.
Multi-buffered to eliminate tearing artifacts.
Video Format Options
Analog RGB plus HSync and VSync (5 wire).
Analog RGB with Composite Sync (4 wire).
Analog RGB with Sync on Green/YPbPr (3 wire).
DVI Single Link.
Operating System Support
Windows® XP, Windows® Vista, Windows® Server 2003, Windows® Server 2008
and Windows® 7.
Power Requirements
Max current at +3.3V – 0.25A.
Max current at +12V – 0.5A.
Max power – 6.8 Watts.
Operating Temperature
0 to 35 deg C / 32 to 96 deg F
Storage Temperature
-20 to 70 deg C / -4 to 158 deg F
Relative Humidity
5% to 90% non-condensing.
3 years
We are continously developing the technology used within our product ranges delivering outstanding innovative solutions,
therefore the specification may change from time to time.
Datapath Limited,
Alfreton Road
Derby, DE21 4AD
Tel: (+44) (0) 1332 294441
Fax: (+44) (0) 1332 290667
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF