STONE design SLIDE Studio

STONE design SLIDE Studio
www.slidedesign.it
STONE design SLIDE Studio
Floor lamp
Year of production: 1997
Versions: lighting.
Material: Polyethylene.
Dimensions: 39 x 20 h 42 cm
Weight: 1,5 Kg
Packaging: 41 x 41 x 24 cm
Packaging volume: 0,04 m3
39
CODE
20
LP ROC050
1x
COLOURS
Lampadaire
Année de production: 1997
Versions: lumineuse.
Matériaux: Polyéthylène.
Dimensions: 39 x 20 h 42 cm
Poids: 1,5 Kg
Emballage: 41 x 41 x 24 cm
Volume emballage: 0,04 m3
42
LIGHTING
DIMENSIONS (cm)
Lampada da terra
Anno di produzione: 1997
Versioni: luminosa.
Materiali: Polietilene.
Dimensioni: 39 x 20 h 42 cm
Peso: 1,5 Kg
Imballaggio: 41 x 41 x 24 cm
Volume imballaggio: 0,04 m3
Energy saving bulb
recommended (not included).
LIGHTING COLOURS
LIGHT WHITE (code LA)
SYMBOLS
For indoor use.
Insulation class 1.
Protected against the intrusion of solid
objects Ø > 12 mm, not against water.
For indoor and outdoor use.
Insulation class 2.
Protected against the intrusion of solid
objects Ø > 1 mm and splashing water.
Stackable item.
Insulation class 3.
Protected against the intrusion of dust
and water jets.
Conformity to the European Community
instructions.
Device proper to direct assembly onto
normally inflammable surfaces.
Fully protected against the intrusion of
dust and immersion in water.
European Community registered model.
100% recyclable polyethylene.
Recycling and disposal of electronic
waste (WEEE).
Small lamp base for E14 - 14 mm
light bulb.
Lamp base for G13 neon tube.
LED technology lighting system.
Medium lamp base for E26 - 26 mm
light bulb.
Lamp base for GU10 spotlight.
Neon tube lighting system.
Standard lamp base for E27 - 27 mm
light bulb.
Lamp base for G4 halogen bulb.
LIGHTING SYMBOLS
Lighting through energy saving bulb.
The upper figure shows the number of allowed bulbs.
The lower figure shows the MAXIMUM recommended power.
Lighting through energy saving fluorescent spotlight.
The upper figure shows the number of allowed spotlights.
The lower figure shows the MAXIMUM recommended power.
Lighting through neon tube.
The upper figure shows the number of allowed neon tubes.
The lower figure shows the MAXIMUM recommended power.
Lighting through energy saving globe bulb.
The upper figure shows the number of allowed bulbs.
The lower figure shows the MAXIMUM recommended power.
Lighting through flexible LED tube.
The lower figure shows the MAXIMUM recommended power.
Lighting through circular T9 neon tube.
The upper figure shows the number of allowed neon tubes.
The lower figure shows the MAXIMUM recommended power.
WIRING SYMBOLS
Wiring with metal clamp.
IP20 protection.
Diameter 11 cm.
Wiring with special base for KIT LED 1,5 WATT.
IP55 protection.
Diameter 11,6 cm.
Wiring with metal base.
IP55 protection.
Diameter 10 cm. Fastening by hex screw key.
Wiring with plastic screw base.
I3 - IP20 protection. E3 - IP55 protection.
Diameter 6 cm.
Wiring with metal base.
IP55 protection.
Diameter 20 cm. Fastening by hex screw key.
Wiring with plastic screw base.
I3 - IP20 protection. E3 - IP55 protection.
Diameter 10 cm.
Wiring with plastic base and metal inserts.
I2 - IP20 protection. E2 - IP55 protection.
Diameter 10 cm. Fastening by slot screwdriver.
Wiring with plastic screw base.
I3 - IP20 protection. E3 - IP55 protection.
Diameter 15 cm.
Wiring with plastic base for LED LP RGB100.
IP44 protection.
Diameter 10 cm.
Special metal base.
IP20 protection.
Several sizes.
MATERIAL PROPERTIES
Material: Linear low-density polyethylene - LLDPE.
Production process: rotational moulding.
Resistant to extreme temperatures (-60°C to +80°C).
UV resistant (except for lighting colours).
High tensile strength.
WARNING
Keep away from excessive heat sources.
Avoid any improper use. Do not stand on the products. When the product has to be moved, lift the product
off the ground in order to avoid damage.
Do not overload the pot structure in order to avoid deforming.
Carefully comply with the maintenance & cleaning instructions.
In case of malfunctioning or damage of the wiring or any electrical parts, refer to a qualified electrician.
MAINTENANCE & CLEANING
To prevent dust and dirt from sticking to the plastic surfaces, periodically clean the products with a damp
cloth and neutral liquid soap diluted in water.
Avoid using ethanol or any liquids containing, even in small amounts, acetone, trichloroethylene or
ammonia (solvents in general).
It is recommended the use of SLIDE’s “CleanUp” cleaner or a degreaser. Spray the cleaning product on the
surface, rub with a damp cloth and rinse abundantly with water (preferably with a high pressure washer).
In case of persistent stains use a high pressure washer or scrub eraser.
The use of the scrub eraser (melamine foam - Scotch-Brite® Easy Eraser or similar) is only recommended
for white colour, as they are slightly abrasive.
The lacquered version is also suitable for outdoor use, however it is more sensitive to scratches:
periodically clean with a polish cleaner, gently rubbing with soft cloth/cotton wool.
Cushions can be cleaned with a damp cloth, neutral liquid soap and water.
For metal parts use specific cleaners.
SUSTAINABILITY & RECYCLING
All SLIDE products are 100% recyclable. Furthermore, grey, black and chocolate matt colours are produced
with recycled polyethylene. SLIDE has a closed production cycle with no health prejudicial emissions and
complying with ecological sustainibility rules.
When a product reaches the end of its life, do not treat the product or any of its parts as domestic waste.
Dispose by sending to differentiated collection centres.
RESPONSIBILITY & RETURNS
SLIDE declines any liability to damages caused to things or persons by an illegitimate use of the product.
SLIDE won’t accept any returned goods without having checked the kind of defects first.
WARRANTY
SLIDE products are guaranteed against all manufacturing faults, granted that the items are appropriately
used, for twenty-four (24) months from the date of purchase upon presentation of the invoice.
LED KITS only are guaranteed for twelve (12) months from the date of purchase.
Warranty doesn’t include parts that are subject to wear and tear due to usage, batteries when provided,
wiring and electrical parts that do not have manufacturing faults.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement