pdf040 02 402 137 EH 1215

pdf040 02 402 137 EH 1215
040-02-402-137-EH-1215.pdf
040-02-402-137-EH-1215
07df0318002c0000d1001a8753006ddf
200-220 WATT MEDICAL POWER SUPPLIES
PMP220 SERIES
DESCRIPTION
The PMP220 series of AC/DC switching power supplies are
for 200-220 watts of continuous output power. They are
enclosed in a 94V-0 rated polycarbonate case with an inlet
to mate with interchangeable cord for world-wide use. All
models meet EN 55011 and FCC class B emission limits,
and are designed for medical applications not for
life-supporting equipment.
RoHS
FEATURES











High efficiency
Low ripple & noise
Overvoltage protection
Short-circuit protection
Overpower protection
Overcurrent protection
Over temperature protection
100% burn-in at full rated load
St a n d b y c o n s u m p t i o n l e s s t h a n 0 . 5 W
C o m p l i a n t w i t h C E C a n d E N E R G Y S TA R
efficiency level V requirements
Compliant with RoHS requirements
SAFETY STANDARD APPROVALS
UL ES 60601-1, CSA C22.2 No. 60601-1
File No. E178020
TÜV EN 60601-1
GENERAL SPECIFICATIONS
INPUT SPECIFICATIONS
Input voltage:
Input frequency:
Input current:
Earth leakage current:
Touch current:
90-264 VAC
47-63 Hz
2.5 A (rms) for 115 VAC
1.2 A (rms) for 230 VAC
100 μA max. @ 264 VAC, 63 Hz
100 μA max. @ 264 VAC, 63 Hz
See rating chart.
Maximum output power:
Ripple and noise:
Overvoltage protection:
See rating chart.
1% peak to peak maximum
Set at 110% to 130% of its nominal
output voltage
All models protected 110% to 120% of
full load conditions
Maximum excursion of 4% or better on
all models, recovering to 1% of final
value within 500 us after a 25% step
load change
Overcurrent protection:
Transient response:
3 s maximum at 100 VAC
Power Factor:
Efficiency:
Line regulation:
Inrush current:
0.95 typical
87% minimum at 100 VAC or 240 VAC
±0.5% maximum at full load
100 A @ 115 VAC or 200 A @ 230 VAC at
25℃ cold start
5600 VDC from input to output (2 MOPP)
2100 VDC from input to ground (1 MOPP)
700 VDC from output to ground
(To verify AC strength, get correct test
method to avoid power supply damage.)
For Class II models, 4000 VAC from input
to output
100,000 hours at full load at 25℃ ambient,
calculated per MIL-HDBK-217F
MTBF:
EMC Performance (IEC60601-1-2)
EN55011:
Class B conducted, class B radiated
FCC:
Class B conducted, class B radiated
VCCI:
Class B conducted, class B radiated
EN61000-3-2:
Harmonic distortion, class A and D
EN61000-3-3:
Line flicker
EN61000-4-2:
ESD, ±8 KV air and ±6 KV contact
EN61000-4-3:
Radiated immunity, 3 V/m
ENVIRONMENTAL SPECIFICATIONS
Operating temperature:
Storage temperature:
Relative humidity:
Derating:
12 ms minimum at 100 VAC
Turn on delay time:
Withstand voltage:
OUTPUT SPECIFICATIONS
Output voltage /current:
Hold-up time:
0℃ to +60℃
-20℃ to +80℃
10% to 90% non-condensing
Derate from 100% at +40℃ linearly to
50% at +60℃
OUTPUT DERATING CURVE
EN61000-4-4:
Fast transient/burst, ±2 KV
EN61000-4-5:
Surge, ±1 KV diff., ±2 KV com
EN61000-4-6:
Conducted immunity, 3 Vrms
EN61000-4-8:
Magnetic field immunity, 3 A/m
EN61000-4-11:
Voltage dip immunity, 30% reduction for
500 ms, 60% reduction for 100 ms, and
>95% reduction for 10 ms
75
040-02-402-137-EH-1215.pdf
040-02-402-137-EH-1215
07df0318002c0000d1001a8753006ddf
UNIVERSAL INPUT
PMP220 MEDICAL SERIES
OUTPUT VOLTAGE/CURRENT RATING CHART
Model
(1)
Output
Max.
Current
Tol.
10.53 A
±5%
Ripple &
(2)
Noise
190 mV
Average Active
Efficiency (typical)
@ 115 / 230 Vac
Max. Power
200 W
87 /87%
Class II
V1
PMP220-13-2
PMP220SF-13-2
19 V
Min.
(3)
Current
0.1 A
PMP220-14
PMP220SF-14
24 V
0.1 A
9.17 A
±5%
240 mV
220 W
90 /92%
7.86 A
±5%
280 mV
220 W
90 /92%
6.11 A
±5%
360 mV
220 W
90 /92%
Class I
PMP220-15
PMP220SF-15
28 V
0.1 A
PMP220-17
PMP220SF-17
36 V
0.1 A
NOTES:
1.
Class I models are equipped with IEC320/C14 inlet, and class II models with IEC320/C8 inlet.
2.
Ripple and noise is maximum peak to peak voltage value measured at output within 20 MHz bandwidth, at rated line voltage and output load
ranges, and with a 47 μF electrolytic capacitor in parallel with a 0.1 μF ceramic capacitor across the output.
3.
All models may be operated at no-load without damage. At no load, output voltage fluctuates beyond 5% due to the burst-mode operation of
the control IC in them for energy saving.
MECHANICAL SPECIFICATIONS
OUTPUT DERATING CURVE
(Optional)
NOTES:
1.
Dimensions shown in inches [mm]
2.
Tolerance 0.02 [0.5] maximum
3.
Weight: 1.0 kg (2.2 lbs.) approx.
4.
Output connector is Molex Mini - Fit receptacle, P/N: 39-01-2060 with female terminal #5556 or equivalent, mating with Molex plug 39-01-2066
and male terminal #5558 or equivalent. It also mates with Molex headers #5566, #5569, or equivalent.
5.
Optional output connector is 4-pin plug with lock, Kycon P/N KPPX-4P or equivalent, mating with 4-pin socket, Kycon P/N KPJX-4S-S or
equivalent, add the suffix assigned for a selected connector to a wanted model number, e.g. PMP220-13-2-HI, for ordering.
PIN CHART
PIN
1
+V1
2
V1
Return
3
V1
Return
4
+V1
5
+V1
6
PIN
V1
Return
76
HI
1
2
+V1
3
4
V1 Return
SHELL OF
CONNECTOR
Class I
Class II
AC
Ground
NC
Headquarter Switzerland:
Pewatron AG
Thurgauerstrasse 66
CH-8052 Zurich
Phone +41 44 877 35 00
[email protected]
Office Germany:
Pewatron AG
Edisonstraße 16
D-85716 Unterschleißheim
Phone +49 89 260 38 47
[email protected]
We are here for you. Addresses and Contacts.
Sales Switzerland & Liechtenstein
Sales International Key Accounts
Postcode 3000 – 9999
Postcode 1000 – 2999
Basil Frei
Pewatron AG
Thurgauerstrasse 66
CH-8052 Zurich
Eric Letsch
Pewatron AG
Thurgauerstrasse 66
CH-8052 Zurich
Peter Felder
Pewatron AG
Thurgauerstrasse 66
CH-8052 Zurich
Phone + 41 44 877 35 18
Mobile + 41 76 279 37 26
Phone + 41 44 877 35 14
Mobile + 41 76 491 66 70
Phone + 41 44 877 35 05
Mobile + 41 79 406 49 83
[email protected]
[email protected]
[email protected]
Sales Germany
Postcode 00000 – 31999
Postcode 38000 – 39999
Postcode 80000 – 99999
Postcode 32000 – 37999
Postcode 40000 – 79999
Sales Austria
Kurt Stritzelberger
Pewatron AG
Neumarkter Straße 86a
D-81673 Munich
Gerhard Vetter
Pewatron AG
Fürstenbergstraße 12
D-55422 Bacharach-Medenscheid
Kurt Stritzelberger
Pewatron AG
Neumarkter Straße 86a
D-81673 Munich
Phone + 49 89 260 52 80
Mobile + 49 171 803 41 35
Phone + 49 674 394 75 75
Mobile + 49 163 762 74 30
Phone + 49 89 260 52 80
Mobile + 49 171 803 41 35
[email protected]
[email protected]
[email protected]
Pressure Sensors
Gas sensors / Gas sensor modules
Load cells
Linear position sensors
Angle sensors
Philipp Kistler
Phone + 41 44 877 35 03
[email protected]
Thomas Clausen
Phone + 41 44 877 35 13
[email protected]
Eric Letsch
Phone + 41 44 877 35 14
[email protected]
Accelerometers
Power supplies
Current sensors
Eric Letsch
Phone + 41 44 877 35 14
[email protected]
Sebastiano Leggio
Phone + 41 44 877 35 06
[email protected]
Sebastiano Leggio
Phone + 41 44 877 35 06
[email protected]
Drive technology
CH Postcode 5000 – 9999 / DE
Drive technology
CH Postcode 1000 – 4999 / AT / IT / FR
Roman Homa
Mobile + 41 79 444 00 86
[email protected]
Christian Mohrenstecher
Mobile +41 76 444 57 93
[email protected]
Sales Other Countries / Product Management
Competitive sensor & power supply solutions worldwide
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement