4x4 HDBaseT Lite Matrix with PoC - e

4x4 HDBaseT Lite Matrix with PoC - e
4x4 HDBaseT Lite Matrix with PoC
Product Code: BPHDMIMBTL4x4
AV SOLUTIONS
Extend the transmission up to 60m (198ft) from the HDMI source
at Full HD 1080p 48-bit.
Support HDMI Deep Color & full 3D (HDBaseT Technology).
Support PoC(Power over Cable) which can power both units from
TX side with power supply.
HDCP compliant.
Bi-directional IR pass-though.
Allows controlling local HDMI sources or display through control
path.
4x4 HDBaseT Lite Matrix with PoC
The BPHDMIMBTL4x4 provides high definition video sources
plus multi-channel (up to 7.1-channel) digital audio from
any of the eight HDMI sources to the remote displays at the
same time.
Through Cat6 LAN cables, not only high quality video and
audio can be transmitted to the display sites, but also users
can switch among eight HDMI sources using the push
button or remote control.
The built-in IR extension function allows users at display
site to access the, decoder,DVD player, PS4 or any HDMI
supported devices directly!
Pure unaltered uncompressed 7.1ch digital HDMI over Cat6 cable
transmission.
Allows any source to be displayed on multiple displays at the
same time.
Allows any HDMI display to view any HDMI source at any time.
Supports 7.1 channel digital audio.
Supports default HDMI EDID and learns the EDID of displays.
The Matrix master can switch every output channels from any
HDMI inputs by Push button, IR remote control, RS-232 and IP
control, web-interface control.
Diagram
HDMI
CAT6
Allows to control main matrix center through control line at
remote receiver.
IR (outgoing)
IR (incoming)
Easy installation with rack-mounting.
RS-232
Fast response time – 2~4 seconds for channel switch.
IR Remote
Front
Up to 60m / 198ft
720p/1080i/1080p
Outgoing IR Signal
Incoming IR Signal
BPHDMICRXDBTL
Control System
CAT5/5e/6
1. Source Status
2. IR Sensor
3. Output Push Button & 7-segment LED
4. Input Push Button & 7-segment LED
5. RJ-45
6. LED
7. HDMI Local Loopout port 1-4 8. IR Receiver 1-4
9. System IR Receiver
10. All IR Output
11. Input 1-4
12. IR Blaster 1-4
13. RS-232
14. Ethernet
15. +24V DC
IR-Transmitter
Back
Game Console
Media PC Saver
HD Satellite Receiver
Blu-Ray Player
PACKAGE DIMENSIONS
D
THE PACKAGE CONTAINS
Height
Depth
Width
Weight
-
-
-
-
(mm)
Package
1 x (4x4) HDBaseT Lite Matrix with PoC
www.ellies.co.za
(mm)
(mm)
(kg)
4x4 HDBaseT Lite Matrix with PoC
Product Code: BPHDMIMBTL4x4
AV SOLUTIONS
TECHNICAL INFORMATION
Specifications:
BPHDMIMBTL4x4
Model Name
Technical
Role of usage
True 4x4 matrix switcher
Transmitter [TX]
HDMI compliance
Receiver [RX]
HDMI Deep Color & full 3D
HDCP compliance
Yes
Video bandwidth
Single - link 340MHz [10.2Gbps]
Video support
480i / 480p / 720p / 1080i / 1080p60
Surround sound (up to 7.1ch) or stereo digital audio
Audio support
Yes
PoC support
HDMI over UTP
transmission range
1080p @60 60m (198ft) [CAT6]
1.2 Volts [peak-to-peak]
Input TMDS signal
5 Volts [peak-to-peak, TTL]
Input DDC signal
ESD protection
[1] Human body model — ±19kV [air-gap discharge] & ±12kV
[contact discharge]
PCB stack-up
4-layer board [impedance control — differential 100Ω; single 50Ω]
Input
4x HDMI / 1x RS-232 / 1x RJ-45
for IP Control / 5x IR socket for IR
receiver
1x RJ-45 (HDBaseT) / 1x IR socket
for IR receiver
Output
4x RJ-45 (HDBaseT) / 4x HDMI /
5x IR socket for IR blaster
1x HDMI / 1x IR socket for IR blaster
HDMI Input selection
Push-in button / IR remote control
/ RS-232 control / IP control
IR remote control
HDMI source control
Controllable via IR pass-through from IR receiver at RX to IR blaster at TX
IR remote control
Electro-optical characteristics: π = 25° / Carrier frequency:35-56kHz
HDMI connector
Type A [19-pin female]
RJ-45 connector
WE/SS 8P8C
RS-232 connector
DE-9 [9-pin D-sub female]
N/A
3.5mm connector
Earphone jack for IR blaster
[All IR Out] IR signal from all
outputs.
Earphone jack for IR receiver.
[System IR] Receives IR commands
from remote control.
[IR1~IR4] IR control on individual
source device.
Earphone jack for IR blaster
[IR] IR control on indivdual display
device
Earphone jack for IR receiver
[IR] Receives IR commands from
remote control
Mechanical
Enclosure
Metal case
Fixedness
2RU rack-mount with ears
Wall hanging holes
Power supply
24V 5A DC
Power consumption
120 Watts [max]
Operation temperature
Storage temperature
Relative humidity
Wall-mount with screws
1 Watt [max]
0~40°C [32~104°F]
-20~60°C [-4~140°F]
20~90% RH [no condensation]
www.ellies.co.za
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement