Datalogic Gryphon I GBT4400 2D Owner Manual


Add to my manuals
64 Pages

advertisement

Datalogic Gryphon I GBT4400 2D Owner Manual | Manualzz

Gryphon™ I GBT4400

General Purpose Handheld

Area Imager Bar Code Reader with Bluetooth® Wireless Technology

Quick Reference Guide

Datalogic Scanning, Inc.

959 Terry Street

Eugene, Oregon 97402

USA

Telephone: (541) 683-5700

Fax: (541) 345-7140

An Unpublished Work - All rights reserved. No part of the contents of this documentation or the procedures described therein may be reproduced or transmitted in any form or by any means without prior written permission of Datalogic Scanning, Inc. or its subsidiaries or affiliates ("Datalogic" or “Datalogic Scanning”).

Owners of Datalogic products are hereby granted a non-exclusive, revocable license to reproduce and transmit this documentation for the purchaser's own internal business purposes.

Purchaser shall not remove or alter any proprietary notices, including copyright notices, contained in this documentation and shall ensure that all notices appear on any reproductions of the documentation.

Should future revisions of this manual be published, you can acquire printed versions by contacting your Datalogic representative. Electronic versions may either be downloadable from the

Datalogic website (www.scanning.datalogic.com) or provided on appropriate media. If you visit our website and would like to make comments or suggestions about this or other Datalogic publications, please let us know via the "Contact Datalogic" page.

Disclaimer

Datalogic has taken reasonable measures to provide information in this manual that is complete and accurate, however, Datalogic reserves the right to change any specification at any time without prior notice.

Datalogic and the Datalogic logo are registered trademarks of

Datalogic S.p.A. in many countries, including the U.S.A. and the

E.U. All other brand and product names may be trademarks of their respective owners.

Patents

This product may be covered by one or more of the following patents:

Design Patents: CN ZL200830142386.5; CN ZL200930006852.1;

CN ZL201030175545.9; EP870787; EP1177943; USD599799;

USD606076; USD629003

Utility Patents: EP996284; EP999514; EP1128315; EP1172756;

EP1396811; EP1413971; EP1828957; JP4435343; US5481098;

US6478224; US6512218; US6513714; US6561427; US6758403;

US6808114; US6877664; US6997385; US7053954; US7234641;

US7387246; US7721966.

Additional patents pending.

Table of Contents

End User License Agreement....................................................................1

Customers Under Software Support ..........................................4

Description .....................................................................................................5

Setting Up the Reader ................................................................................6

Positioning the Base Station .........................................................6

Changing the Base Station Position ................................ 6

Connecting the Base Station ....................................................................8

Securing the DC Power Cord (Optional) ........................ 9

System and Network Layout ...................................................... 11

Typical Setup with Cradle and Host.............................. 11

Using the BC40xx™ Radio Base .................................................. 12

Radio Base LEDs ................................................................... 12

Cleaning ........................................................................................................ 13

Charging the Batteries ............................................................................. 14

Battery Safety ................................................................................... 14

Replacing the Batteries ................................................................ 16

Using the Gryphon™ I GBT4400 ........................................................... 18

Linking the Reader .................................................................................... 19

Link Datalogic RF Devices to Base ................................. 19

Link Scanner to Bluetooth Adapter............................... 19

Power Off ...................................................................................................... 20

Selecting the Interface Type .................................................................. 20

Interface Selection ......................................................................... 20

Configuring the Interface ................................................. 20

Keyboard Interface.............................................................. 23

Scancode Tables .................................................................. 25

Country Mode ....................................................................... 25

Caps Lock State .................................................................... 30

Numlock.................................................................................. 31

Programming .............................................................................................. 32

Using Programming Bar Codes ................................................. 32

Configure Other Settings ............................................................. 32

Resetting Standard Product Defaults ...................................... 32

Reading Parameters ................................................................................. 33

Aiming System ................................................................................ 33

Good Read Green Spot Duration .............................................. 34

Scan Modes ................................................................................................. 35

Pick Mode .......................................................................................... 37

Multiple Labels in a Volume ....................................................... 37

Technical Specifications .......................................................................... 38

LED and Beeper Indications ................................................................... 42

Error Codes .................................................................................................. 45

Base Station Indications .......................................................................... 46

Statement of Agency Compliance ...................................................... 47

FCC Class B Compliance Statement ......................................... 47

FCC RF Radiation Exposure Statement ........................ 48

Canadian Notice .............................................................................. 48

Power Supply ................................................................................... 48

Imager Labeling .............................................................................. 49

Aiming System...................................................................... 49

WEEE Statement .............................................................................. 54

Datalogic Scanning Limited Factory Warranty .................... 55

Warranty Coverage ............................................................. 55

Warranty Claims Process................................................... 55

Warranty Exclusions............................................................ 55

No Assignment ..................................................................... 56

Risk of Loss ............................................................................. 56

Ergonomic Recommendations ............................................................. 57

Services and Support ............................................................................... 58

Datalogic Scanning, Inc.

GRYPHON™ PRODUCT SERIES

END USER LICENSE AGREEMENT

Notice to End User: The Datalogic Product you have acquired contains embedded

Software, which is integral to the product's operation. This Software is being provided to you under license, subject to the terms and conditions of this Agreement. If you use the Datalogic Product, you will be deemed to have accepted the terms and conditions of this Agreement. If you do not intend to be bound to the terms of this Agreement,

Datalogic is not willing to license the Software to you, you may not use the Datalogic

Product or the Software, and you must contact the party from whom you acquired the

Datalogic Product for instructions.

This End User Software License Agreement ("Agreement") is a legally binding agreement governing the licensing of the Software and Documentation by Datalogic Scanning, Inc. and its Affiliates ("Datalogic") to the entity or person who has purchased or otherwise acquired a Datalogic Product ("End User"). For purposes of this Agreement, any software that is associated with a separate end-user license agreement is licensed to you under the terms of that license agreement. Datalogic and End User hereby agree as follows:

1. Definitions.

1.1 "Affiliate" means a business entity currently existing or later acquired that controls, is controlled by, or is under common control with Datalogic S.p.A.

1.2 "Documentation" means materials such as user's guides, program reference guides, quick reference guides, manuals, or similar materials associated with or related to the Datalogic Product, whether in printed, "online", or other form.

1.3 "Proprietary Information" means: (a) source code, object code, software, documentation, and any related internal design, system design, data base design, algorithms, technology, technical data or information, implementation techniques, and trade secrets related to the Software, (b) any other trade secrets marked appropriately or identified as proprietary or confidential, and (c) any information that End User, under the circumstances, should recognize as confidential. Proprietary Information does not include any information that the receiving party can establish was (1) in the public domain, (2) already in the receiving party's possession or rightfully known prior to receipt, (3) rightfully learned from a third party not in violation of any other's proprietary rights, or

(4) independently developed without access to Proprietary Information.

1.4 "Datalogic Product" means the Datalogic® Gryphon™ series scanner product, including all embedded Software in and all Documentation related to such product, which has been purchased or otherwise acquired by End User, whether obtained directly or indirectly from Datalogic.

1.5 "Software" means any software or computer programs of Datalogic or its third party licensors in machine readable form which is embedded in the Datalogic

Product, whether obtained directly or indirectly from Datalogic, including any replacement, update, upgrade, enhancement or modification.

2. Scope Of License Granted.

2.1 Datalogic grants to End User a non-exclusive, non-transferable, perpetual license to use the Software, solely on the Datalogic Product in which it is embedded ("designated Datalogic Product"), in machine-readable form only, solely for End User's internal business purposes. This Agreement does not convey ownership of the Software to End User. Title to the Software shall be and remain with Datalogic or the third party from whom Datalogic has obtained a licensed right. As used in this Agreement, the term "purchase" or its equivalents when applied to the Software shall mean "acquire under license." End

User is not entitled to receipt or use of the source code to any Software.

2.2

End User shall not copy, modify, decompile, disassemble, reverse engineer, or otherwise reproduce or remanufacture the Software, whether modified or unmodified, nor sell, assign, sublicense, distribute, lend, rent, give, or otherwise transfer the Software to any other person or organization, for purposes other than as expressly provided in this Agreement, without Datalogic's prior written consent.

3. Transfers, Support.

3.1

Any copying, installing, reproduction, remanufacture, reverse engineering, electronic transfer, or other use of the Software on other than the designated

Datalogic Product will be a material breach of this Agreement. However, Datalogic may elect not to terminate this Agreement or the granted licenses, but

Quick Reference Guide 1

3.2

3.3

instead may elect to notify End User that End User is deemed to have ordered and accepted a license for each breaching use. End User shall pay Datalogic the applicable list price for such licenses as of the date of such breach.

End User shall not sell, assign, sublicense, distribute, lend, rent, give, or otherwise transfer the Datalogic Product to any third party unless such third party agrees with Datalogic in writing to be bound by the terms and conditions of this Agreement. Any such transfer of the Datalogic Product absent such agreement shall be null and void.

End User may obtain support for Software from Datalogic at Datalogic's standard support fees and under Datalogic's standard support terms and conditions in effect at the time the support is requested.

4. Intellectual Property.

End User acknowledges that the Software constitutes valuable trade secrets of Datalogic or Datalogic's third party licensors and that the Software is protected by intellectual property laws and treaties. The license set forth in this Agreement does not transfer to End User any ownership of Datalogic's or its third party licensors' copyrights, patents, trademarks, service marks, trade secrets, or other intellectual property rights and End

User shall have no right to commence any legal actions to obtain such rights. End User shall not remove, modify, or take any other action that would obscure any copyright, trademark, patent marking, or other intellectual property notices contained in or on the

Datalogic Product.

5. Proprietary Information.

5.1

5.2

5.3

End User acknowledges that Proprietary Information is the confidential, proprietary, and trade secret property of Datalogic and Datalogic's third party licensors and End User acquires no right or interest in any Proprietary Information.

End User shall not disclose, provide, or otherwise make available the Proprietary Information of Datalogic or its third party licensors to any person other than End User's authorized employees or agents who are under confidentiality agreement, and End User shall not use the Proprietary Information other than in conjunction with use of the Datalogic Product exclusively for End User's internal business purposes. End User shall take steps to protect the Proprietary

Information no less securely than if it were End User's own intellectual property.

The provisions of this Proprietary Information Section shall survive and continue for five (5) years after the termination of this Agreement.

6. Limited Warranty.

6.1

6.2

Datalogic warrants that, under normal use and operation, the Datalogic Product will conform substantially to the applicable Documentation for the period specified in the Documentation. During this period, for all reproducible nonconformities for which Datalogic has been given written notice, Datalogic will use commercially reasonable efforts to remedy nonconformities verified by

Datalogic. End User agrees to supply Datalogic with all reasonably requested information and assistance necessary to help Datalogic in remedying such nonconformities. For all defects reported to Datalogic within the warranty period, Datalogic's liability is limited to providing End User with one copy of corrections or responding to End User's problem reports according to Datalogic's standard assistance practices. Datalogic does not warrant that the product will meet End User's requirements or that use of the product will be uninterrupted or error free, or that Datalogic's remedial efforts will correct any nonconformance. This limited warranty does not cover any product that have been subjected to damage or abuse, whether intentionally, accidentally, or by neglect, or to unauthorized repair or unauthorized installation, and shall be void if End User modifies the product, uses the product in any manner other than as established in the Documentation, or if End User breaches any of the provisions of this Agreement.

EXCEPT AS PROVIDED IN THIS AGREEMENT, THE DATALOGIC PRODUCT IS PRO-

VIDED "AS IS" AND DATALOGIC MAKES NO WARRANTIES OF ANY KIND,

EXPRESS OR IMPLIED, WRITTEN OR ORAL, WITH RESPECT TO THE PRODUCT,

AND SPECIFICALLY DISCLAIMS THE IMPLIED WARRANTIES OF MERCHANTABIL-

ITY AND FITNESS FOR A PARTICULAR PURPOSE.

2 Gryphon™ I GBT4400

7. Infringement.

7.1

7.2

7.3

7.4

Datalogic will defend End User against any claim in a lawsuit that the Datalogic

Product furnished hereunder infringe a United States patent or copyright of a third party and Datalogic will pay any damages finally awarded against End

User by a court of competent jurisdiction that are attributable to such claim or will pay End User's part of any settlement that is attributable to such claim, provided, that 1) End User notifies Datalogic promptly in writing of the claim,

2) Datalogic controls the defense or settlement of the claim, and 3) End User cooperates fully with Datalogic in such defense or settlement. All notices of a claim should be sent to Datalogic Scanning, Inc., Legal Department, 959 Terry

Street, Eugene, OR 97402.

In the defense or settlement of any such claim, Datalogic may, at its option, 1) procure for End User the right to continue using the Datalogic Product, 2) modify the Datalogic Product so that it becomes non-infringing, 3) replace the

Datalogic Product with an equivalent product not subject to such claim, or 4) provide End User an opportunity to return the Datalogic Product and receive a refund of the purchase price paid, less a reasonable allowance for use.

Datalogic shall have no liability to End User for claims of infringement based upon 1) the use of any Datalogic Product in combination with any product which Datalogic has not either furnished or authorized for use with such Datalogic Product 2) the use of any Datalogic Product designed, manufactured, or modified to the specifications of End User, or 3) End User's modification of the

Datalogic Product without written authorization from Datalogic.

THE FOREGOING STATES DATALOGIC'S COMPLETE AND ENTIRE OBLIGATION

CONCERNING CLAIMS OF PATENT, COPYRIGHT, OR OTHER INTELLECTUAL

PROPERTY INFRINGEMENT, CANCELS AND SUPERCEDES ANY PRIOR AGREE-

MENTS, WHETHER ORAL OR WRITTEN, BETWEEN THE PARTIES CONCERNING

SUCH CLAIMS, AND WILL NOT BE MODIFIED OR AMENDED BY ANY PAST, CON-

TEMPORANEOUS, OR FUTURE AGREEMENTS OR DEALINGS BETWEEN THE PAR-

TIES, WHETHER ORAL OR WRITTEN, EXCEPT AS SET FORTH IN A FUTURE

WRITING SIGNED BY BOTH PARTIES.

8. Limitation Of Liability.

EXCEPT AS PROVIDED IN SECTION 7, DATALOGIC SHALL NOT BE LIABLE FOR ANY CLAIMS

AGAINST END USER BY ANY OTHER PARTY. IN NO EVENT SHALL DATALOGIC'S LIABILITY

FOR DAMAGES, IF ANY, WHETHER BASED UPON CONTRACT, TORT (INCLUDING NEGLI-

GENCE), PRODUCT LIABILITY, STRICT LIABILITY, WARRANTY, OR ANY OTHER BASIS,

EXCEED THE PRICE OR FEE PAID BY END USER FOR THE DATALOGIC PRODUCT. UNDER NO

CIRCUMSTANCES SHALL DATALOGIC BE LIABLE TO END USER OR ANY THIRD PARTY FOR

LOST PROFITS, LOST DATA, INTERRUPTION OF BUSINESS OR SERVICE, OR FOR ANY OTHER

SPECIAL, CONSEQUENTIAL, CONTINGENT, INDIRECT, INCIDENTAL, PUNITIVE, EXEMPLARY,

OR OTHER SIMILAR DAMAGES, EVEN IF DATALOGIC HAS BEEN ADVISED OF THE POSSIBIL-

ITY OF SUCH DAMAGES.

9. Government Restricted Rights; International Use.

9.1

9.2

Use, duplication, or disclosure of the Software by the U.S. Government is subject to the restrictions for computer software developed at private expense as set forth in the U.S. Federal Acquisition Regulations at FAR 52.227-14(g), or

52.227-19 or in the Rights in Technical Data and Computer Software clause at

DFARS 252.227-7013(c)(1)(ii), whichever is applicable.

If End User is using the Datalogic Product outside of the United States, End

User must comply with the applicable local laws of the country in which the

Datalogic Product is used, with U.S. export control laws, and with the English language version of this Agreement. The provisions of the "United Nations

Convention on International Sale of Goods" shall not apply to this Agreement.

10. Termination.

10.1

Either party may terminate this Agreement or any license granted under this

Agreement at any time upon written notice if the other party breaches any provision of this Agreement.

10.2

Upon termination of this Agreement, End User immediately shall cease using any nonembedded software and shall return to Datalogic or destroy all nonembedded software covered by this Agreement, and shall furnish Datalogic with a certificate of compliance with this provision signed by an officer or authorized representative of End User. For embedded software, End User agrees to sign a waiver prepared by Datalogic concerning further use of the embedded Software. End User's resumed or continued use of the embedded

Software after termination shall constitute End User's agreement to be bound by the terms and conditions of this Agreement for such use.

Quick Reference Guide 3

4

11. General Provisions.

11.1 Entire Agreement; Amendment. This document contains the entire agreement between the parties relating to the licensing of the Software and supersedes all prior or contemporaneous agreements, written or oral, between the parties concerning the licensing of the Software. This Agreement may not be changed, amended, or modified except by written document signed by Datalogic.

11.2 Notice. All notices required or authorized under this Agreement shall be given in writing, and shall be effective when received, with evidence of receipt.

Notices to Datalogic shall be sent to the attention of Contract Administration,

Datalogic Scanning, Inc., 959 Terry Street, Eugene, OR 97402, or such other address as may be specified by Datalogic in writing.

11.3 Waiver. A party's failure to enforce any of the terms and conditions of this

Agreement shall not prevent the party's later enforcement of such terms and conditions.

11.4 Governing Law; Venue: This Agreement and the rights of the parties hereunder shall be governed by and construed in accordance with the laws of the

State of Oregon U.S.A, without regard to the rules governing conflicts of law.

The state or federal courts of the State of Oregon located in either Multnomah or Lane counties shall have exclusive jurisdiction over all matters regarding this Agreement, except that Datalogic shall have the right, at its absolute discretion, to initiate proceedings in the courts of any other state, country, or territory in which End User resides, or in which any of End User's assets are located.

11.5 Attorneys' Fees. In the event an action is brought to enforce the terms and conditions of this Agreement, the prevailing party shall be entitled to reasonable attorneys' fees, both at trial and on appeal.

- END -

Software Product Policy

Datalogic reserves the right to ship its products with the latest version of software/firmware available. This provides our customers with the very latest in Datalogic software technology.

The only exception to this policy is when the buyer has a signed contract with Datalogic that clearly defines the terms and conditions for making software/firmware changes in products shipped to the buyer.

Customers Under Software Support

Customers that elect to subscribe to Datalogic Software Maintenance and Support Agreement will receive 30 days advance notification of:

(1) the release of a new software version; and/or (2) discontinuation of any prior software version that will no longer be supported. Datalogic will provide maintenance for a fee that will assist customers in transitioning to the next software version. If a customer is currently using the software version being discontinued, the customer may elect to transition to any one of the newer versions, depending on the hardware in use.

To arrange for a Software Maintenance and Support Agreement please contact your Datalogic sales person.

Gryphon™ I GBT4400

Gryphon™ I GBT4400

Description

With rich feature sets and extensive options, the Gryphon™ product series from Datalogic Scanning represents the premium level of data collection equipment for general purpose applications. The Gryphon GBT4400 readers have enhanced optics with improved motion tolerance allowing codes placed on fast moving objects to be easily and quickly captured, creating the ideal reader for tasks requiring high throughput like those found in retail and light industrial environments.

Omni-

Directional

Operation

Decoding

Imaging

To read a symbol or capture an image, simply aim the reader and pull the trigger. The Gryphon™ I

GBT4400 is a powerful omni-directional reader, so the orientation of the symbol is not important.

Datalogic’s exclusive patented ‘Green Spot’ for good-read feedback helps to improve productivity in noisy environments or in situations where silence is required. When using the product with the cradle at a 45° position, the Green Spot can work as an aiming system to aid in positioning the bar code for quick and intuitive reading.

Reliably decodes all standard 1D (linear) and 2D bar codes, including GS1 DataBar™ linear codes,

Postal Codes (China Post), Stacked Codes (such as

GS1 DataBar Expanded Stacked, GS1 DataBar

Stacked, GS1 DataBar, Stacked Omnidirectional).

The data stream — acquired from decoding a symbol — is rapidly sent to the host. The reader is immediately available to read another symbol.

The Gryphon™ I GBT4400 can also function as a camera by capturing entire images or image portions of labels, signatures, and other items.

Quick Reference Guide 5

Setting Up the Reader

Setting Up the Reader

Follow the steps below to connect and get your reader up and communicating with its host.

1.

Configure the Base Station starting on this page.

2.

Charge the Batteries (see page 14).

3.

Link to the Base Station (see page 19).

4.

Select the Interface Type (see page 20).

5.

Configure the Reader starting on page 32 (optional,

depends on settings needed).

Positioning the Base Station

The base station/charger may be set up in desk application to hold the reader in two different positions, either a horizontal or standing position, in order to provide the most comfortable use depending on needs.

Standing

Changing the Base Station Position

Horizontal

The base station is configured by installing one of two sets of mechanical parts that come with the cordless kit. The default mounts (shown below) provide three options: vertical (wall) mounting, standing (45°), or horizontal mounting with a higher mechanical retention of the scanner. Use the other mounts only for horizontal mounting, with lower retention of the scanner. The different parts may be interchanged to customize retention preferences.

A tool such as a rigid pen or a flat screwdriver can be used to change the mounts. Do not allow it to touch the contacts.

6 Gryphon™ I GBT4400

Setting Up the Reader

1.

Insert the appropriate parts for the desired base station position, as shown below.

Standing,

Horizontal or Vertical

Horizontal

Only

2.

Using your thumbs, push open the plastic tabs on the bottom of the base to free the wing holders.

Tab

Tab

To ensure best contact and performance, do not intermix the parts of the two different mount sets.

Quick Reference Guide 7

Connecting the Base Station

3.

The stand can now be repositioned in either horizontal or standing position.

Horizontal

8

Standing

Connecting the Base Station

Figure 1 on page 9

shows how to connect the Base Station to a terminal, PC or other host device. Turn off the host before connection and consult the manual for that equipment (if necessary) before proceeding. Connect the interface cable before applying power to the Base Station.

The Gryphon GBT44XX can also be Powered by the Terminal.

When powered by the Terminal, the battery charger is automatically set as Slow charge.

For some specific interfaces or hosts or lengths of cable, the use of an external power supply may be recommended for

full recharging capability (see Technical Specifications on page 38 for more details).

Base Station Connection and Routing: Fully insert the Power Cable and Interface (I/F) Cable connectors into their respective ports in the underside of the Base Station (see

Figure 1 ). Then

connect to an AC Adapter, and plug the AC power cord into the (wall) outlet.

Gryphon™ I GBT4400

Figure 1. Connecting the Base Station

Connecting the Base Station

I/F Cable

Base

Cord

Station

DC Power

AC/DC

Adapter

Wall plug

Connector

Securing the DC Power Cord (Optional)

The DC power cord for the adapter can be secured to the bottom of the base in order to maximize the mechanical retention of the cable itself. The routing of the power cord can be changed to accommodate base station positioning: horizontal, stand or wall mount. The cables can be looped around to the front of the Base Station, or fed directly out the back of the

Base Station, as shown in Figure 2 .

Figure 2. Options for routing the DC cord

Please refer to the arrows depicted on the bottom of the base when placing the cables, detailed in

Figure 3

.

Quick Reference Guide 9

Connecting the Base Station

Figure 3. Arrows showing routing

Host Connection: Verify before connection that the reader’s cable type is compatible with your host equipment.

The Gryphon I GBT4400 can be set up to require a PIN code when connecting to the host. If you are adding new equipment to a system that uses a custom security PIN, please see the PRG for information before proceeding.

Most connections plug directly into the host device as shown

in Figure 4 . Keyboard Wedge interface cables have a ‘Y’ connec-

tion where its female end mates with the male end of the cable from the keyboard and the remaining end at the keyboard port on the terminal/PC.

Figure 4. Connecting to the Host or...

B

US

W an d

K

W ey ed or...

bo ge or...

IB

M

10 Gryphon™ I GBT4400

Connecting the Base Station

Power Connection: Plug the AC Adapter into an approved AC wall socket with the cable facing downwards (as shown in

Figure 1 ) to prevent undue strain on the socket.

Disconnecting the Cable: To detach the cable, insert a paper clip or similar object into the hole on the base, as shown.

Figure 5. Disconnecting the Cable

Insert

Paper Clip

System and Network Layout

Typical Setup with Cradle and Host

Figure 6. Reader Layout

Quick Reference Guide 11

Connecting the Base Station

Using the BC40xx™ Radio Base

Radio Base LEDs

LEDs on the Gryphon Base provide information about the

Base as well as battery charging status, as shown in Figure 7 .

Figure 7. Gryphon Base LEDs

YELLOW LED

RED LED —

GREEN LED

BUTTON

Table 1. Radio Base LEDs

LED

Power on /

Data

STATUS

Yellow On = Base is powered

Yellow Blinking = Base receives data and commands from the Host or the

Reader.

Charging Red On = the Battery is charging.

Charge completed

Charging +

Charge completed

Green On = the Battery is completely charged.

Red and Green Blinking together = the

Reader is not correctly placed onto the

Base.

The button can be used to force device connection via the

Datalogic Aladdin Software tool, to force a BT disconnect, and for paging the scanner when it is activated. Refer to the

Gryphon I GBT4400 Product Reference Guide (PRG) for a more detailed explanation.

12 Gryphon™ I GBT4400

Cleaning

Cleaning

Exterior surfaces and scan windows exposed to spills, smudges or debris require periodic cleaning to ensure best performance during scanning operations. Contacts on the scanner and the base should also be cleaned as needed to ensure a good connection.

Use a soft, dry cloth to clean the product. If the product is very soiled, clean it with a soft cloth moistened with a diluted nonaggressive cleaning solution or diluted ethyl alcohol.

Do not use abrasive or aggressive cleansing agents or abrasive pads to clean scan windows, contacts or plastics.

Do not spray or pour liquids directly onto the unit.

CAUTION

Quick Reference Guide 13

Charging the Batteries

Charging the Batteries

To charge the battery, simply insert the Gryphon into the base.

When the scanner is fully seated in the cradle, it will sound a

“chirp” to indicate that the cradle has detected the scanner connection.

The LEDs on the base (shown in Table 1

) will indicate the status of the battery.

Before using the Battery, read “Battery Safety” in the following section. Datalogic recommends annual replacement of rechargeable battery packs to ensure maximum performance.

Battery Safety

To install, charge and/or perform any other action on the battery, follow the instructions in this manual.

WARNING

WARNING

Do not discharge the battery using any device except for the scanner. When the battery is used in devices other than the designated product, it may damage the battery or reduce its life expectancy. If the device causes an abnormal current to flow, it may cause the battery to become hot, explode or ignite and cause serious injury.

Lithium-ion battery packs may get hot, explode or ignite and cause serious injury if exposed to abusive conditions.

Be sure to follow the safety warnings listed on the following page.

• Do not place the battery pack in fire or heat.

• Do not connect the positive terminal and negative terminal of the battery pack to each other with any metal object (such as wire).

• Do not carry or store the battery pack together with metal objects.

• Do not pierce the battery pack with nails, strike it with a hammer, step on it or otherwise subject it to strong impacts or shocks.

• Do not solder directly onto the battery pack.

• Do not expose the battery pack to liquids, or allow the battery to get wet.

• Do not apply voltages to the battery pack contacts.

14 Gryphon™ I GBT4400

Charging the Batteries

WARNING

In the event the battery pack leaks and the fluid gets into your eye, do not rub the eye. Rinse well with water and immediately seek medical care. If left untreated, the battery fluid could cause damage to the eye.

CAUTION

Always charge the battery at 32° – 104°F (0° - 40°C) temperature range.

Use only the authorized power supplies, battery pack, chargers, and docks supplied by your Datalogic reseller.

The use of any other power supplies can damage the device and void your warranty.

Do not disassemble or modify the battery. The battery contains safety and protection devices, which, if damaged, may cause the battery to generate heat, explode or ignite.

CAUTION

Do not place the battery in or near fire, on stoves or other high temperature locations.

Do not place the battery in direct sunlight, or use or store the battery inside cars in hot weather. Doing so may cause the battery to generate heat, explode or ignite. Using the battery in this manner may also result in a loss of performance and a shortened life expectancy.

CAUTION

Do not place the battery in microwave ovens, high-pressure containers or on induction cookware.

Immediately discontinue use of the battery if, while using, charging or storing the battery, the battery emits an unusual smell, feels hot, changes color or shape, or appears abnormal in any other way.

Do not replace the battery pack when the device is turned on.

Do not remove or damage the battery pack’s label.

Do not use the battery pack if it is damaged in any part.

Battery pack usage by children should be supervised.

As with other battery types, Lithium-Ion (LI) batteries will lose capacity over time. Capacity deterioration is noticeable after one year of service whether the battery is in use or not. It is difficult to precisely predict the finite life of a LI battery, but cell manufacturers rate them at 500 charge cycles. In other words, the batteries should be expected to take 500 full discharge/charge cycles before needing replacement. This number is higher if partial discharging/recharging is adhered to rather than full/deep discharging.

Quick Reference Guide 15

Charging the Batteries

Storage of batteries for long time at fully charged status or at fully discharged status should be avoided.

CAUTION

CAUTION

Only in case of long storage, to avoid deep discharge of the battery it is recommended to partially recharge the battery every three months to keep the charge status at a medium level.

As a reference, run a fast recharge for 20 minutes every three months on unused products to avoid any performance deterioration of the cell.

The useful life of LI batteries depends on usage and number of charges, etc., after which they should be removed from service, especially in mission critical applications. Do not continue to use a battery showing excessive loss of capacity, it should be properly recycled / disposed of and replaced.

Collect and recycle waste batteries separately from the device to comply with European Directive 2006/66/EC, 2002/95/

EC, 2002/96/EC and subsequent modifications, US and China regulatory and other laws and regulations about the environment.

Replacing the Batteries

Before proceeding, read “Battery Safety” on the preceding pages. Datalogic recommends annual replacement of rechargeable battery packs to ensure maximum performance.

Use the following procedure to change the reader’s battery:

1.

With a screwdriver, unscrew the battery cover screw.

16 Gryphon™ I GBT4400

Charging the Batteries

2.

Unplug the white connector, and remove the two screws securing the battery holder.

Connector

Screw Screw

3.

Carefully lift out the gold contacts circuit, and remove the battery holder cap while letting the white connector pass through the hole in the battery holder (as shown below).

Pass-through hole

Gold contacts circuit

4.

Remove the old battery from its place (if present), and insert the new battery in the same position.

5.

Replace the battery holder cap, plug in the connector and return the contacts circuit to its previous location.

When inserting the new battery into the handle, take care to position the battery and the connector as described above.

6.

Insert the cover in the handle and screw it back into place.

Quick Reference Guide 17

Using the Gryphon™ I GBT4400

Using the Gryphon™ I GBT4400

The Gryphon™ I GBT4400 normally functions by capturing and decoding codes. The reader is equipped with an internal motion-sensing function which activates the aiming system on device motion. The intelligent aiming system indicates the field of view which should be positioned over the bar code:

Aiming System

Relative Size and Location of Aiming System Pattern

Linear bar code 2D Matrix symbol

A red beam illuminates the label. The field of view indicated by the aiming system will be smaller when the reader is closer to the bar code and larger when it is farther from the code.

Symbologies with smaller bars or elements (mil size) should be read closer to the unit. Symbologies with larger bars or elements (mil size) should be read farther from the unit.

If the aiming system is centered and the entire bar code is within the aiming field, you will get a good read. Successful reading is signaled by an audible tone plus a good-read green spot LED indicator.

Reference the Gryphon I GBT4400 Product Reference Guide

(PRG) or Datalogic Aladdin configuration software (both available on the Datalogic website) for more information about this feature and other programmable settings.

18 Gryphon™ I GBT4400

Linking the Reader

Linking the Reader

Link Datalogic RF Devices to Base

For RF devices, before configuring the interface it is necessary to link the handheld with the base.

To link the handheld and the base, either press the trigger to wake it, or simply mount into the base to wake up for operation. If the reader was previously linked to another base, you must first scan the Unlink bar code before re-linking to the new base.

Unlink

Link Scanner to Bluetooth Adapter

1.

Install any drivers provided with the Bluetooth adapter.

2.

Scan the Enable RF Link to Server label below to make the scanner visible to the host computer.

3.

Use the host computer’s Bluetooth manager to “Discover new devices” and select "Datalogic Scanner." If you receive an error message, it may be necessary to disable security on the device.

4.

Use an RS-232 terminal program to see incoming data on the port designated by the computer's Bluetooth manager.

Enable RF Link to Server

The Gryphon I GBT4400 can be set up to require a PIN code when connecting. If you want to set up a PIN, or when adding new equipment to a system that uses a custom security

PIN, please see the PRG for information.

Quick Reference Guide 19

Power Off

Power Off

Scan the bar code below to shut off power to the BT handheld until the next trigger pull.

PowerOff

Selecting the Interface Type

Upon completing the physical connection between the reader and its host, proceed directly to Interface Selection below for information and programming for the interface type the reader is connected to (for example: RS-232, Keyboard Wedge,

USB, etc.) and scan the appropriate bar code to select your system’s correct interface type.

Interface Selection

Each reader version will support one of the following sets of host interfaces:

General Purpose Versions: RS-232, RS-232 OPOS, USB, Keyboard Wedge, Wand.

Retail Point of Sale Versions : RS-232, RS-232 OPOS, USB,

IBM 46XX.

Information and programming options for each interface type are provided in this section. For defaults and additional information associated with each interface, proceed to the corresponding chapter in the Gryphon™ 4400 PRG.

Configuring the Interface

Scan the programming bar code which selects the appropriate interface type for the system the reader will be connected to.

Unlike some other programming features and options, interface selections require that you scan only one programming bar code label. DO NOT scan an ENTER/EXIT bar code prior to scanning an interface selection bar code.

Some interfaces require the scanner to start in the disabled state when powered up. If additional scanner configuration is desired while in this state, pull the trigger and hold for 5 seconds. The scanner will change to a state that allows programming with bar codes.

20 Gryphon™ I GBT4400

RS-232

Selecting the Interface Type

RS-232 standard interface

Select RS232-STD

RS-232 Wincor-Nixdorf

Select RS232-WN

RS-232 for use with OPOS/UPOS/JavaPOS

Select RS-232 OPOS

USB COM to simulate RS-232 standard interface

Select USB-COM-STD a a. Download the correct USB COM driver from www.datalogic.com

Quick Reference Guide 21

Selecting the Interface Type

IBM

IBM-46xx Port 5B reader interface

Select IBM-P5B

IBM-46xx Port 9B reader interface

Select IBM-P9B

USB-OEM

USB-OEM

(can be used for OPOS/UPOS/JavaPOS)

Select USB-OEM

22 Gryphon™ I GBT4400

Selecting the Interface Type

Keyboard Interface

Use the programming bar codes to select options for USB

Keyboard and Wedge Interfaces.

KEYBOARD

AT, PS/2 25-286, 30-286, 50, 50Z, 60, 70, 80, 90 & 95 w/

Standard Key Encoding

Select KBD-AT

Keyboard Wedge for IBM AT PS2 with standard key encoding but without external keyboard

Select KBD-AT-NK

AT, PS/2 25-286, 30-286, 50, 50Z, 60, 70, 80, 90 & 95 w/Alternate Key

Select KBD-AT-ALT

Keyboard Wedge for IBM AT PS2 with alternate key encoding but without external keyboard

Select KBD-AT-ALT-NK

Quick Reference Guide 23

Selecting the Interface Type

KEYBOARD (continued)

PC/XT w/Standard Key Encoding

Select KBD-XT

Keyboard Wedge for IBM Terminal 3153

Select KBD-IBM-3153

Keyboard Wedge for IBM Terminals 31xx, 32xx, 34xx, 37xx make only keyboard

Select KBD-IBM-M

Keyboard Wedge for IBM Terminals 31xx, 32xx, 34xx, 37xx make break keyboard

Select KBD-IBM-MB

USB Keyboard with alternate key encoding

24

Select USB Alternate Keyboard

USB Keyboard for Apple computers

Select USB-KBD-APPLE

Gryphon™ I GBT4400

Selecting the Interface Type

KEYBOARD (continued)

Keyboard Wedge for DIGITAL Terminals

VT2xx, VT3xx, VT4xx

Select KBD-DIG-VT

USB Keyboard with standard key encoding

Select USB Keyboard

WAND EMULATION

Wand Emulation

Select WAND

Scancode Tables

Reference the Gryphon™ PRG for information about control character emulation which applies to keyboard interfaces.

Country Mode

This feature specifies the country/language supported by the keyboard. Only these interfaces support ALL Country Modes:

• USB Keyboard (without alternate key encoding)

• AT, PS/2 25-286, 30-286, 50, 50Z, 60, 70, 80, 90 &

95 w/Std Key Encoding

• Keyboard Wedge for IBM AT PS2 with standard key encoding but without external keyboard

• AT, PS/2 25-286, 30-286, 50, 50Z, 60, 70, 80, 90 &

95 without Alternate Key

• Keyboard Wedge for IBM AT PS2 without alternate key encoding but without external keyboard

All other interfaces support ONLY the following Country

Modes: U.S., Belgium, Britain, France, Germany, Italy,

Spain, Sweden.

Quick Reference Guide 25

Selecting the Interface Type

COUNTRY MODE

ENTER/EXIT PROGRAMMING MODE

Country Mode = U.S.

Country Mode = Belgium

Country Mode = Britain

Country Mode = Croatia*

* Supports only the interfaces listed in the Country Mode feature description

26 Gryphon™ I GBT4400

COUNTRY MODE (Continued)

Selecting the Interface Type

Country Mode = Czech*

Country Mode = Denmark*

Country Mode = France

Country Mode = Germany

Country Mode = Hungary*

Country Mode = Italy

* Supports only the interfaces listed in the Country Mode feature description

Quick Reference Guide 27

Selecting the Interface Type

COUNTRY MODE (Continued)

Country Mode = Japanese 106-key*

Country Mode = Norway*

Country Mode = Poland*

Country Mode = Portugal*

Country Mode = Romania*

Country Mode = Spain

* Supports only the interfaces listed in the Country Mode feature description

28 Gryphon™ I GBT4400

COUNTRY MODE (Continued)

Selecting the Interface Type

Country Mode = Sweden

Country Mode = Slovakia*

Country Mode = Switzerland*

* Supports only the interfaces listed in the Country Mode feature description

Quick Reference Guide 29

Selecting the Interface Type

Caps Lock State

This option specifies the format in which the reader sends character data. This applies to keyboard wedge interfaces. This does not apply when an alternate key encoding keyboard is selected.

ENTER/EXIT PROGRAMMING MODE

Caps Lock State = Caps Lock OFF

Caps Lock State = Caps Lock ON

Caps Lock State = AUTO Caps Lock Enable

30 Gryphon™ I GBT4400

Selecting the Interface Type

Numlock

This option specifies the setting of the Numbers Lock (Numlock) key while in keyboard wedge interface. This only applies to alternate key encoding interfaces. It does not apply to USB keyboard.

ENTER/EXIT PROGRAMMING MODE

Numlock = Numlock key unchanged

Numlock = Numlock key toggled

Quick Reference Guide 31

Programming

Programming

The reader is factory-configured with a set of standard default features. After scanning the interface bar code from the Interfaces section, select other options and customize your reader through use of the programming bar codes available in the

Product Reference Guide (PRG). Check the corresponding features section for your interface, and also the Data Editing and Symbologies chapters.

Using Programming Bar Codes

This manual contains bar codes which allow you to reconfigure your reader. Some programming bar code labels, like the

Standard Product Default Settings on page 32, require only the scan of that single label to enact the change.

Other bar codes require the reader to be placed in Programming Mode prior to scanning them. Scan an ENTER/EXIT bar code once to enter Programming Mode; scan the desired parameter settings; scan the ENTER/EXIT bar code again to accept your changes, which exits Programming Mode and returns the reader to normal operation.

Configure Other Settings

Additional programming bar codes are available in the PRG to allow for customizing programming features. If your installation requires different programming than the standard factory default settings, refer to the PRG.

Resetting Standard Product Defaults

Reference the PRG for a listing of standard factory settings. If you aren’t sure what programming options are in your reader, or you’ve changed some options and want the factory settings restored, scan the Standard Product Default Settings bar code below to copy the factory configuration for the currently active interface to the current configuration.

Factory defaults are based on the interface type. Configure the reader for the correct interface before scanning this label.

32

Standard Product Default Settings

Gryphon™ I GBT4400

Reading Parameters

Reading Parameters

Point the reader at the target and pull the trigger to enable the aiming system and the illuminator (red beam) to capture and decode the image. The aiming system will briefly switch off during the acquisition time and if no code is decoded will switch on again before the next acquisition. The illuminator will remain on until the symbol is decoded.

As you read code symbols, adjust the distance at which you are holding the reader.

Aiming System

A number of options for customizing control of the Aiming

System are available. See the PRG for more information and programming bar codes.

Quick Reference Guide 33

Reading Parameters

Good Read Green Spot Duration

Successful reading can be signaled by a good read green spot.

Use the bar codes below to specify the duration of the good read pointer beam after a good read.

ENTER/EXIT PROGRAMMING MODE

Green Spot Duration = Disable (Green Spot is Off )

Green Spot Duration = Short (300 msec)

Green Spot Duration = Medium (500 msec)

Green Spot Duration = Long (800 msec)

34 Gryphon™ I GBT4400

Scan Modes

Scan Modes

The imager can operate in one of several scanning modes.

Trigger Single — When the trigger is pulled, scanning is activated until one of the following occurs:

- a programmable duration

1

has elapsed

- a label has been read

- the trigger is released

This mode is associated with typical handheld reader operation.

Trigger Hold Multiple — When the trigger is pulled, scanning starts and the product scans until the trigger is released or a programmable duration 1 has elapsed. Reading a label does not disable scanning. Double Read Timeout 1 prevents undesired multiple reads while in this mode.

Trigger Pulse Multiple — When the trigger is pulled and released, scanning is activated until programmable duration1 has elapsed or the trigger has been pulled again to transition to another state. Double Read Timeout 1 prevents undesired multiple reads while in this mode.

Flashing — The reader flashes 1 on and off regardless of the trigger status.

Always On — No trigger pull is required to read a bar code.

Scanning is continually on. If the trigger is pulled, the reader acts as if it is in Trigger Single Mode. Double Read Timeout 1 prevents undesired multiple reads while in this mode.

Stand Mode — No trigger pull is required to read a bar code.

Scanning is turned on automatically when an item is placed in reader’s field of view. If the trigger is pulled, the reader acts as if it is in Single Read mode. Double Read Timeout 1 prevents undesired multiple reads while in this mode.

The scanner will automatically switch to stand mode when placed into the cradle (base station) unless configured differently. Reference the PRG for more information.

1.

See the Product Reference Guide (PRG) for more information

Quick Reference Guide 35

Scan Modes

SCAN MODE

36

ENTER/EXIT PROGRAMMING MODE

Scan Mode = Trigger Single

Scan Mode = Trigger Hold Multiple

Scan Mode = Trigger Pulse Multiple

Scan Mode = Flashing

Scan Mode = Always On

Scan Mode = Stand Mode

Gryphon™ I GBT4400

Scan Modes

Pick Mode

Pick Mode is a Decoding and Transmission process where bar codes that are not within the configurable distance from the center of the aiming pattern are not acknowledged or transmitted to the host. It is active only while the scanner is in Trigger Single mode. If the scanner switches to a different Read

Mode, Pick Mode is automatically disabled.

This feature is not compatible with Multiple Labels Reading in a Volume. See the PRG for more information.

ENTER/EXIT PROGRAMMING MODE

Pick Mode = Disable

Pick Mode = Enable

Multiple Labels in a Volume

Enables/disables the ability of scanner to decode multiple labels in the same image. Several programming options are available for this feature, see the PRG for more information.

Quick Reference Guide 37

Technical Specifications

Technical Specifications

The following table contains Physical and Performance Characteristics, User Environment and Regulatory information.

Physical Characteristics

Color

Dimensions

Weight (without cable)

White/Gray

Black/Gray

Height 7.1”/181 mm

Length 3.9”/100 mm

Width 2.8”/71 mm

Approximately

8.7 ounces/246 g (reader)

8.7 ounces/246 g (base charger)

Electrical Characteristics

Battery Type

Typical charge time for full charge from full discharge

Operating autonomy

(continuous reading)

Cradle consumption and DC input supply range

Li-Ion battery pack

4 hours with 12V external power supply adapter a

Max 22 hours with Host power

(in this case no supply adapter is needed) a

50,000 reads

(typical)

Volt 4.75-14 VDC; Power <8W b

;

Max 500mA when in host/bus powered mode b

.

Performance Characteristics

LEDs Light Source

Roll (Tilt) Angle c

Pitch Angle c

Skew (Yaw) Angle c

Up to ± 180°

± 40°

± 40°

Field of View 40° H x 26° V a Charge Times are much lower when battery is within daily typical operating condition.

b Typical input current measured under factory default configuration.

c Based on ISO 15423 specifications

38 Gryphon™ I GBT4400

Technical Specifications

Depth of Field (Typical)

a

Symbology SR: HD:

Code 39

5mil: 1.6” -7.5” (4.0 -19cm)

10mil: 0.4” - 11.8” (1.0 - 30cm)

20mil: up to 17.7” (up to 45cm)

3mil: 0.9” - 3.6” (2.4 - 9.1cm)

5 mil: 0.3” - 4.5” (0.8 -11.3cm)

EAN

PDF-417

DataMatrix

QR Code

Minimum

Element Width

7.5mil: 0.5” - 10.6” (2.0 - 27cm)

13mil: 0.6” - 15.7” (1.5 - 40cm)

6.6mil: 1.0” - 5.9” (2.5 - 15cm)

10mil: 0.2” - 8.6” (0.5 - 22cm)

15mil: 0.6” - 13.4” (1.5 - 34cm)

10mil: 0.8” to 6.3” (2.0 - 16cm)

15mil: 0” to 9.3” (0 - 23.6cm)

10mil: 1.2” to 4.9” (3.0 - 12.5cm)

15mil: 0.4” to 7.5” (1.0 - 19cm)

Standard Range:

1D Min. Resolution = 4 mil

PDF-417 Min.Resolution = 5 mil

Datamatrix Min. Resolution = 7 mil

7.5mil: 0” - 5” (0 - 12.7cm)

13mil: 4.3” - 6.8” (1.1- 17.2cm)

4mil: 0.7” - 2.7” (1.8 - 6.8cm)

6.6mil: 0.1” - 4.4” (0.1 - 11.2cm)

10mil: 0” - 5.6” (0 - 14.3cm)

5mil: 1.1” - 2.4” (2.8-6.1cm)

6.7mil: 0.8” - 1.7” (2.1 - 4.2cm)

High Density:

1D Min. Resolution = 2.5 mil

PDF-417 Min. Resolution = 4 mil

Datamatrix Min. Resolution = 5 mil

Print Contrast

Minimum

25% minimum reflectance a 13 mils DOF based on EAN. All other 1D codes are Code 39. All labels grade A, typical environmental light, 20°C, label inclination 10°

Quick Reference Guide 39

Technical Specifications

Decode Capability

1D Bar Codes

UPC/EAN/JAN (A, E, 13, 8); UPC/EAN/JAN (including P2 /P5); UPC/EAN/JAN (including; ISBN /

Bookland & ISSN); UPC/EAN Coupons; Code 39 (including full ASCII); Code 39 Trioptic; Code39

CIP (French Pharmaceutical); LOGMARS (Code 39 w/ standard check digit enabled); Danish

PPT; Code 32 (Italian Pharmacode 39); Code 128; Code 128 ISBT; Interleaved 2 of 5; Standard 2 of 5; Interleaved 2 of 5 CIP (HR); Industrial 2 of 5; Discrete 2 of 5; Datalogic 2 of 5 (China Post

Code/Chinese 2 of 5); IATA 2of5 Air cargo code; Code 11; Codabar; Codabar (NW7); ABC Codabar; Code 93; MSI; PZN; Plessey; Anker Plessey; Follet 2 of 5; GS1 DataBar Omnidirectional; GS1

DataBar Limited; GS1 DataBar Expanded; GS1 DataBar Truncated; DATABAR Expanded Coupon.

2D / Stacked Codes

The Gryphon I GBT4400 scanner is capable of decoding the following symbologies using multiple frames (i.e. Multi-Frame Decoding):

PDF-417; QR Code; Aztec; Datamatrix; Inverse Datamatrix; Datamatrix is configurable for the following parameters:; Normal or Inverted; Square or Rectangular Style; Data length (1 - 3600 characters); Maxicode; QR Codes (QR, Micro QR and Multiple QR Codes); Aztec; Postal Codes;

Australian Post; Japanese Post; KIX Post; Planet Code; Postnet; Royal Mail Code (RM45CC);

Intelligent Mail Bar Code (IMB); Sweden Post; Portugal Post; LaPoste A/R 39; 4-State Canada;

PDF-417; MacroPDF; Micro PDF417; GS1 Composites (1 - 12); Codablock F; French CIP13 a

; GS1

DataBar Stacked; GS1 DataBar Stacked Omnidirectional; GS1 DataBar Expanded Stacked; GSI

Databar Composites; Chinese Sensible Code; Inverted 2D codes.

Note: The reader can apply the Normal/Reverse Decoding Control to the following symbologies: Datamatrix, QR, Micro QR, Aztec and Chinese Sensible Code.

Interfaces Supported b

RS-232 Std, RS-232 Wincor-Nixdorf, RS-232 OPOS, IBM 46xx (ports5B and 9B), USB Com Std.,

USB Keyboard, USB Alternate Keyboard, USB OEM, Keyboard Wedge (AT with or w/o Alternate

Key, IBM AT PS2 with or w/o Alternate Key, PC-XT, IBM 3153, IBM Terminals 31xx, 32xx,34xx,

37xx make only and make break keyboard, Digital Terminals VT2x, VT3xx, VT4xx, and Apple) and Wand Emulation.

User Environment

Operating Temperature

Charging Temperature

Storage Temperature

Humidity

32° to 122° F (0° to 50° C)

32° to 104° F (0° to 40° C)

-4° to 158° F (-20° to 70° C)

Operating: 5% to 90% relative humidity, non-condensing

40 Gryphon™ I GBT4400

Technical Specifications

Drop Specifications

Scanner withstands 18 drops from 1.8 meters

(5.9 feet) to concrete

Up to 100,000 Lux Ambient Light Immunity

Contaminants Spray/rain

Dust/particulates

ESD Level

Regulatory

IEC 529-IP52 (scanner only)

16 KV

Electrical Safety

EMI/RFI

Laser Class Safety

UL 60950, CSA C22.2 No. 60950, IEC 60950

Europe - CE; Australia - C-tick; Russia – GOST; USA/CANADA –

FCC/IC; Japan – JRF/VCCI; Mexico - NOM + Cofetel; South

Korea - KCC; Brazil - ANATEL; Argentina - CNC; China - SRRC;

Malaysia - SIRIM; Indonesia, Singapore - IDA; Taiwain - NCC;

Philippines - NTC

IEC Class 2

Radiation 1 mW Avg., Emitted wavelength 650 nm, 12ms pulse, Beam Divergence 8.4 deg x 8.1 deg ("plus" pattern).

Complies with FDA performance standards for laser products except for deviations pursuant to

Laser Notice No. 50, dated June 24, 2007.

Radio Features

Frequency Range 2400 to 2483.5 MHz

Range (in open air) 30 m a It is acceptable to handle this with ULE b

See Interface Selection on page 20 for a listing of available interface sets by version type.

Quick Reference Guide 41

LED and Beeper Indications

LED and Beeper Indications

The reader’s beeper sounds and its LED illuminates to indicate various functions or errors on the reader. An optional“Green

Spot” also performs useful functions. The following tables list these indications. One exception to the behaviors listed in the tables is that the reader’s functions are programmable, and so may or may not be turned on. For example, certain indications such as the power-up beep can be disabled using programming bar code labels.

Indication

Power-up

Beep

The reader is in the process of poweringup.

Description LED

N/A

Good Read

Beep

ROM Failure

Limited Scanning Label

Read

Reader Active

Mode

Reader

Disabled

A label has been successfully scanned by the reader.

LED behavior for this indication is configurable via the feature “Good

Read: When to

Indicate”

(see the PRG for information.)

There is an error in the reader's software/programming

Indicates that a host connection is not established when the

IBM or USB interface is enabled.

The reader is active and ready to scan.

The reader has been disabled by the host.

Flashes

N/A

The LED is lit steadily a

The LED blinks continuously

Reader 'chirps' six times at the highest frequency and current volume.

N/A

N/A

Beeper

Reader beeps four times at highest frequency and volume upon powerup.

The reader will beep once at current frequency, volume, mono/bitonal setting and duration upon a successful label scan.

Reader sounds one error beep at highest volume.

42 Gryphon™ I GBT4400

LED and Beeper Indications

Beeper Indication

Green Spot flashes a momentarily

Image

Capture

Description

Upon successful read of a label, the software shall turn the green spot on for the time specified by the configured value.

When ready to capture image

LED

N/A

Blue light flashes

2 times when updating

N/A

N/A a Except when in sleep mode or when a Good Read LED Duration other than 00 is selected

Quick Reference Guide 43

LED and Beeper Indications

Programming Mode - The following indications ONLY occur when the reader is in Programming Mode.

INDICATION

Label Programming

Mode Entry

Label Programming

Mode Rejection of

Label

Label Programming

Mode Cancel Item

Entry

DESCRIPTION

A valid programming label has been scanned.

A label has been rejected.

LED

LED blinks continuously

N/A

BEEPER

Reader sounds four low frequency beeps.

Reader sounds three times at lowest frequency and current volume.

Label Programming

Mode Acceptance of

Partial Label

Label Programming

Mode Acceptance of

Programming

In cases where multiple labels must be scanned to program one feature, this indication acknowledges each portion as it is successfully scanned.

Configuration option(s) have been successfully programmed via labels and the reader has exited Programming

Mode.

Cancel label has been scanned.

N/A

N/A

N/A

Reader sounds one short beep at highest frequency and current volume.

Reader sounds one high frequency beep and

4 low frequency beeps followed by reset beeps.

Reader sounds two times at low frequency and current volume.

44 Gryphon™ I GBT4400

Error Codes

Error Codes

Upon startup, if the reader sounds a long tone, this means the reader has not passed its automatic Selftest and has entered

FRU (Field Replaceable Unit) isolation mode. If the reader is reset, the sequence will be repeated. The following table describes the LED flashes/beep codes associated with an error found.

Number of

LED Flashes/

Beeps

6

12

1

2

15

Error

Configuration

Interface PCB

Digital PCB

Imager

Accelerometer

Corrective Action

Contact Helpdesk for assistance

Quick Reference Guide 45

Base Station Indications

Base Station Indications

Indication

Power-up Complete

Reader Disabled by the HOST or the communication with HOST is not established

Data/labels are transmitted to the

HOST

Programming Mode

Configuration alignment with the

HH is in progress

Battery charger in progress

Battery charger complete

Battery charger error

No HH is placed on the cradle

LEDS

Yellow LED on

Yellow LED blinking ~1Hz

Yellow LEDs turned off for 100mSec

Yellow LED blinks quickly

Red LED blinks quickly

Red LED on

Green LED on

Green LED and Red LEDs blink alternatively ~1Hz

Red and Green LEDs off

46 Gryphon™ I GBT4400

Statement of Agency Compliance

Regulatory Information

All versions of the reader are designed to be compliant with rules and regulations in locations they are sold and will be labeled as required.

Any changes or modifications to equipment, not expressly approved by Datalogic could void the user's authority to operate the equipment.

Statement of Agency Compliance

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC Class B Compliance Statement

The user is cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the

FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio or television technician for help.

Quick Reference Guide 47

Statement of Agency Compliance

FCC RF Radiation Exposure Statement

Exposure to Radio-Frequency Radiation

CAUTION

To comply with FCC RF exposure compliance requirements, for mobile configurations, a separation distance of at least 20 cm must be maintained between the antenna of this device and all persons.

This device must not be co-located or operating in conjunction with any other antenna or transmitter.

Canadian Notice

This equipment does not exceed the Class B limits for radio noise emissions as described in the Radio Interference Regulations of the Canadian Department of Communications.

Le present appareil numerique n’emet pas de bruits radioelectriques depassant les limites applicables aux appareils numeriques de la classe B prescrites dans le Reglement sur le brouillage radioelectrique edicte par le ministere des Communications du Canada.

CAUTION

Do not attempt to open or otherwise service any components in the optics cavity. Opening or servicing any part of the optics cavity by unauthorized personnel may violate laser safety regulations.

Power Supply

This device is intended to be connected to a UL Listed/CSA

Certified computer which supplies power directly to the reader or else be supplied by UL Listed/CSA Certified Power Unit marked “Class 2” or LPS power source rated 5-14V minimum

900mA, which supplies power directly to the Base/Charger via the power connector of the Base itself.

48 Gryphon™ I GBT4400

Statement of Agency Compliance

Imager Labeling

Sample labels are shown for placement purposes only. Please view the labels on your product for actual details, as they may vary from those depicted.

Scanner Regulatory Label

Base Station Label

PATENTS PENDING

C

239045

US

Aiming System

The Gryphon

aiming system meets the Class 2 requirements for laser safety. The laser information is located on the window of the Scanner and is shown below.

Quick Reference Guide 49

Statement of Agency Compliance

I D F E

LA LUCE

LASER È VISI-

BILE

ALL'OCCHIO

UMANO E

VIENE EMESSA

DALLA FINES-

TRA INDI-

CATA NELLA

FIGURA.

DIE LASER-STRAH-

LUNG IST FÜR DAS

MENSCHLICHE

AUGE SICHTBAR

UND WIRD AM

STRAHLAUS TRITTS-

FENSTER AUSGE-

SENDET (SIEHE

BILD)

LE RAYON

LASER EST VISI-

BLE À L'OEIL

NU ET IL EST

ÉMIS PAR LA

FENÊTRE

DÉSIGNÉE SUR

L'ILLUSTRA-

TION DANS LA

FIGURE

LUCE LASER

NON FISSARE

IL FASCIO

APPAREC-

CHIO LASER DI

CLASSE 2

MASSIMA

POTENZA

D'USCITA:

LUNGHEZZA

D'ONDA

EMESSA:

CONFORME A

EN 60825-1

(2007)

LASERSTRAHLUNG

NICHT IN DEN

STRAHL BLICKEN

PRODUKT DER

LASERKLASSE 2

MAXIMALE AUS-

GANGSLEISTUNG:

WELLENLÄGE:

ENTSPR. EN 60825-

1 (2007)

RAYON LASER

EVITER DE

REGARDER LE

RAYON APPAR-

EIL LASER DE

CLASSE 2 PUIS-

SANCE DE SOR-

TIE:

LONGUEUR

D'ONDE EMISE:

CONFORME A

EN 60825-1

(2007)

A LUZ LÁSER ES

VISIBLE AL OJO

HUMANO Y ES

EMITIDA POR

LA VENTANA

INDICADA EN

LA FIGURA.

RAYO LÁSER

NO MIRAR FIJO

EL RAYO

APARATO

LÁSER DE

CLASE 2 MÁX-

IMA POTENCIA

DE SALIDA:

LONGITUD DE

ONDA EMIT-

IDA:

CONFORME A

EN 60825-1

(2007)

ENGLISH

The following information is provided to comply with the rules imposed by international authorities and refers to the correct use of your terminal.

STANDARD LASER SAFETY REGULATIONS

This product conforms to the applicable requirements of both

CDRH 21 CFR 1040 and EN 60825-1 at the date of manufacture.

For installation, use and maintenance, it is not necessary to open the device.

WARNING

Use of controls or adjustments or performance of procedures other than those specified herein may result in exposure to hazardous visible laser light.

50 Gryphon™ I GBT4400

Statement of Agency Compliance

The product utilizes a low-power laser diode. Although staring directly at the laser beam momentarily causes no known biological damage, avoid staring at the beam as one would with any very strong light source, such as the sun. Avoid allowing the laser beam to hit the eye of an observer, even through reflective surfaces such as mirrors, etc.

ITALIANO

Le seguenti informazioni vengono fornite dietro direttive delle autorità internazionali e si riferiscono all’uso corretto del terminale.

NORMATIVE STANDARD PER LA SICUREZZA LASER

Questo prodotto risulta conforme alle normative vigenti sulla sicurezza laser alla data di produzione: CDRH 21 CFR 1040 e EN 60825-1.

Non si rende mai necessario aprire l’appa-recchio per motivi di installazione, utilizzo o manutenzione.

L'utilizzo di procedure o regolazioni differenti da quelle descritte nella documentazione può provocare un'esposizione pericolosa a luce laser visibile.

ATTENZIONE

Il prodotto utilizza un diodo laser a bassa potenza. Sebbene non siano noti danni riportati dall’occhio umano in seguito ad una esposizione di breve durata, evitare di fissare il raggio laser così come si eviterebbe qualsiasi altra sorgente di luminosità intensa, ad esempio il sole. Evitare inoltre di dirigere il raggio laser negli occhi di un osservatore, anche attraverso superfici riflettenti come gli specchi.

DEUTSCH

Die folgenden Informationen stimmen mit den Sicherheitshinweisen überein, die von internationalen Behörden auferlegt wurden, und sie beziehen sich auf den korrekten

Gebrauch vom Terminal.

NORM FÜR DIE LASERSICHERHEIT

Dies Produkt entspricht am Tag der Herstellung den gültigen

EN 60825-1 und CDRH 21 CFR 1040 Normen für die Lasersicherheit.

Quick Reference Guide 51

Statement of Agency Compliance

Es ist nicht notwendig, das Gerät wegen Betrieb oder Installations-, und Wartungs-Arbeiten zu öffnen.

Jegliche Änderungen am Gerät sowie Vorgehensweisen, die nicht in dieser Betriebsanleitung beschreiben werden, können ein gefährliches Laserlicht verursachen.

ACHTUNG

Der Produkt benutzt eine Laserdiode. Obwohl zur Zeit keine

Augenschäden von kurzen Einstrahlungen bekannt sind, sollten Sie es vermeiden für längere Zeit in den Laserstrahl zu schauen, genauso wenig wie in starke Lichtquellen (z.B. die

Sonne). Vermeiden Sie es, den Laserstrahl weder gegen die Augen eines Beobachters, noch gegen reflektierende Oberflächen zu richten.

FRANÇAIS

Les informations suivantes sont fournies selon les règles fixées par les autorités internationales et se réfèrent à une correcte utilisation du terminal.

NORMES DE SECURITE LASER

Ce produit est conforme aux normes de sécurité laser en vigueur à sa date de fabrication: CDRH 21 CFR 1040 et EN

60825-1.

Il n’est pas nécessaire d’ouvrir l’appareil pour l’installation, l’utilisation ou l’entretien.

L'utilisation de procédures ou réglages différents de ceux donnés ici peut entraîner une dangereuse exposition à lumière laser visible.

ATTENTION

Le produit utilise une diode laser. Aucun dommage aux yeux humains n’a été constaté à la suite d’une exposition au rayon laser. Eviter de regarder fixement le rayon, comme toute autre source lumineuse intense telle que le soleil. Eviter aussi de diriger le rayon vers les yeux d’un observateur, même à travers des surfaces réfléchissantes (miroirs, par exemple).

52 Gryphon™ I GBT4400

Statement of Agency Compliance

ESPAÑOL

Las informaciones siguientes son presentadas en conformidad con las disposiciones de las autoridades internacionales y se refieren al uso correcto del terminal.

NORMATIVAS ESTÁNDAR PARA LA SEGURIDAD LÁSER

Este aparato resulta conforme a las normativas vigentes de seguridad láser a la fecha de producción: CDRH 21 CFR 1040 y EN 60825-1.

No es necesario abrir el aparato para la instalación, la utilización o la manutención.

La utilización de procedimientos o regulaciones diferentes de aquellas describidas en la documentación puede causar una exposición peligrosa a la luz láser visible.

ATENCIÓN

El aparato utiliza un diodo láser a baja potencia. No son notorios daños a los ojos humanos a consecuencia de una exposición de corta duración. Eviten de mirar fijo el rayo láser así como evitarían cualquiera otra fuente de luminosidad intensa, por ejemplo el sol. Además, eviten de dirigir el rayo láser hacia los ojos de un observador, también a través de superficies reflectantes como los espejos.

The Gryphon™ Handheld Reader is not user-serviceable.

Opening the case of the unit can cause internal damage and will void the warranty.

CAUTION

Quick Reference Guide 53

Statement of Agency Compliance

WEEE Statement

Waste Electrical and Electronic Equipment

(WEEE) Statement

English

For information about the disposal of Waste Electrical and Electronic Equipment (WEEE), please refer to the website at www.scanning.datalogic.com.

Italian

Per informazioni sullo smaltimento delle apparecchiature elettriche ed elettroniche consultare il sito Web www.scanning.datalogic.com.

French

Pour toute information relative à l’élimination des déchets électroniques (WEEE), veuillez consulter le site internet www.scanning.datalogic.com.

German

Informationen zur Entsorgung von Elektro- und Elektronik- Altgeräten (WEEE) erhalten

Sie auf der Webseite www.scanning.datalogic.com.

Spanish

Si desea información acerca de los procedimientos para el desecho de los residuos del equipo eléctrico y electrónico (WEEE), visite la página Web www.scanning.datalogic.com.

Portuguese

Para informações sobre a disposição de Sucatagem de Equipamentos Elétricos e

Eletrônicos (WEEE -Waste Electrical and Electronic Equipment), consultar o site web www.scanning.datalogic.com.

Chinese

有关处理废弃电气电子设备 (WEEE) 的信息, 请参考

Datalogic 公司的网站 www.scanning.datalogic.com/。

Japanese

廃電気電子機器 (WEEE) の処理についての関連事項は

Datalogic のサイト www.scanning.datalogic.com をご参照下さ

い。

54 Gryphon™ I GBT4400

Statement of Agency Compliance

Datalogic Scanning Limited Factory Warranty

Warranty Coverage

Datalogic warrants to Customer that Datalogic's products will be free from defects in materials and workmanship for a period of 1 year from product shipment. Datalogic

Scanning (“Datalogic”) hardware products are warranted against defects in material and workmanship under normal and proper use. The liability of Datalogic under this warranty is limited to furnishing the labor and parts necessary to remedy any defect covered by this warranty and restore the product to its normal operating condition. Repair or replacement of product during the warranty does not extend the original warranty term.

Products are sold on the basis of specifications applicable at the time of manufacture and Datalogic has no obligation to modify or update products once sold.

If Datalogic determines that a product has defects in material or workmanship, Datalogic shall, at its sole option repair or replace the product without additional charge for parts and labor, or credit or refund the defective products duly returned to Datalogic. To perform repairs, Datalogic may use new or reconditioned parts, components, subassemblies or products that have been tested as meeting applicable specifications for equivalent new material and products. Customer will allow Datalogic to scrap all parts removed from the repaired product. The warranty period shall extend from the date of shipment from Datalogic for the duration published by Datalogic for the product at the time of purchase (Warranty period). Datalogic warrants repaired hardware devices against defects in workmanship and materials on the repaired assembly for a 90 day period starting from the date of shipment of the repaired product from Datalogic or until the expiration of the original warranty period, whichever is longer. Datalogic does not guarantee, and it is not responsible for, the maintenance of, damage to, or loss of configurations, data, and applications on the repaired units and at its sole discretion can return the units in the “factory default” configuration or with any software or firmware update available at the time of the repair (other than the firmware or software installed during the manufacture of the product). Customer accepts responsibility to maintain a back up copy of its software and data.

Warranty Claims Process

In order to obtain service under the Factory Warranty, Customer must notify Datalogic of the claimed defect before the expiration of the applicable Warranty period and obtain from Datalogic a return authorization number (RMA) for return of the product to a designated Datalogic service center. If Datalogic determines Customer’s claim is valid, Datalogic will repair or replace product without additional charge for parts and labor.

Customer shall be responsible for packaging and shipping the product to the designated Datalogic service center, with shipping charges prepaid. Datalogic shall pay for the return of the product to Customer if the shipment is to a location within the country in which the Datalogic service center is located. Customer shall be responsible for paying all shipping charges, duties, taxes, and any other charges for products returned to any other locations. Failure to follow the applicable RMA policy, may result in a processing fee. Customer shall be responsible for return shipment expenses for products which

Datalogic, at its sole discretion, determines are not defective or eligible for warranty repair.

Warranty Exclusions

The Datalogic Factory Warranty shall not apply to:

(i) any product which has been damaged, modified, altered, repaired or upgraded by other than Datalogic service personnel or its authorized representatives;

(ii) any claimed defect, failure or damage which Datalogic determines was caused by faulty operations, improper use, abuse, misuse, wear and tear, negligence, improper storage or use of parts or accessories not approved or supplied by Datalogic;

(iii) any claimed defect or damage caused by the use of product with any other instrument, equipment or apparatus;

(iv) any claimed defect or damage caused by the failure to provide proper maintenance, including but not limited to cleaning the upper window in accordance with product manual;

Quick Reference Guide 55

Statement of Agency Compliance

(v) any defect or damage caused by natural or man-made disaster such as but not limited to fire, water damage, floods, other natural disasters, vandalism or abusive events that would cause internal and external component damage or destruction of the whole unit, consumable items;

(vi) any damage or malfunctioning caused by non-restoring action as for example firmware or software upgrades, software or hardware reconfigurations etc.;

(vii) the replacement of upper window/cartridge due to scratching, stains or other degradation and/or

(viii) any consumable or equivalent (e.g., cables, power supply, batteries, keypads, touch screen, triggers etc.).

No Assignment

Customer may not assign or otherwise transfer its rights or obligations under this warranty except to a purchaser or transferee of product. No attempted assignment or transfer in violation of this provision shall be valid or binding upon Datalogic.

DATALOGIC'S LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR

IMPLIED, ORAL OR WRITTEN, STATUTORY OR OTHERWISE, INCLUDING, WITHOUT LIMITA-

TION, ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR

PURPOSE, OR NONINFRINGEMENT. DATALOGIC SHALL NOT BE LIABLE FOR ANY DAM-

AGES SUSTAINED BY CUSTOMER ARISING FROM DELAYS IN THE REPLACEMENT OR

REPAIR OF PRODUCTS UNDER THE ABOVE. THE REMEDY SET FORTH IN THIS WARRANTY

STATEMENT IS THE CUSTOMER’S SOLE AND EXCLUSIVE REMEDY FOR WARRANTY

CLAIMS. UNDER NO CIRCUMSTANCES WILL DATALOGIC BE LIABLE TO CUSTOMER OR

ANY THIRD PARTY FOR ANY LOST PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL IN-

DIRECT, SPECIAL OR CONTINGENT DAMAGES REGARDLESS OF WHETHER DATALOGIC

HAD ADVANCE NOTICE OF THE POSSIBILITY OF SUCH DAMAGES.

Risk of Loss

Customer shall bear risk of loss or damage for product in transit to Datalogic. Datalogic shall assume risk of loss or damage for product in Datalogic’s possession. In the absence of specific written instructions for the return of product to Customer, Datalogic will select the carrier, but Datalogic shall not thereby assume any liability in connection with the return shipment.

56 Gryphon™ I GBT4400

Ergonomic Recommendations

Ergonomic Recommendations

CAUTION

In order to avoid or minimize the potential risk of ergonomic injury follow the recommendations below. Consult with your local Health & Safety Manager to ensure that you are adhering to your company’s safety programs to prevent employee injury.

• Reduce or eliminate repetitive motion

• Maintain a natural position

• Reduce or eliminate excessive force

• Keep objects that are used frequently within easy reach

• Perform tasks at correct heights

• Reduce or eliminate vibration

• Reduce or eliminate direct pressure

• Provide adjustable workstations

• Provide adequate clearance

• Provide a suitable working environment

• Improve work procedures.

Quick Reference Guide 57

Services and Support

Services and Support

Datalogic provides several services as well as technical support through its website. Log on to www.scanning.datalogic.com

and click on the links indicated for further information.

Products

Search through the links to arrive at your product page where you can download specific Manuals and Software & Utilities , including:

• Datalogic Aladdin™ , a multi-platform utility program that allows device configuration using a PC. It provides RS-232 interface configuration as well as configuration bar code printing.

Service & Support

• Technical Support - Product documentation and programming guides and Technical Support Department in the world

• Service Programs - Warranty Extensions and Maintenance Agreements

• Repair Services - Flat Rate Repairs and Return Material Authorization (RMA) Repairs.

• Downloads – Manuals & Documentation, Data

Sheets, Product Catalogues, etc.

Contact Us

• Information Request Form and Sales & Service Network

58 Gryphon™ I GBT4400

DECLARATION OF CONFORMITY

10

EC-063

Rev.: 0

Pag.: 1 di 1

Datalogic Scanning, Inc.

959 Terry Street

Eugene, Oregon 97402

USA dichiara che declares that the déclare que le bescheinigt, daß das Gerät declare que el

Gryphon GBT 4400; Cordless Barcode Reader

Gryphon BC 40X0-YY-BT; Cordless Base Station /Charger e tutti i suoi modelli and all its models et tous ses modèles und seine Modelle y todos sus modelos sono conformi alle Direttive del Consiglio Europeo sottoelencate: are in conformity with the requirements of the European Council Directives listed below: sont conformes aux spécifications des Directives de l'Union Européenne ci-dessous: den nachstehenden angeführten Direktiven des Europäischen Rats: cumple con los requisitos de las Directivas del Consejo Europeo, según la lista siguiente:

1999/5/EC R&TTE

Questa dichiarazione è basata sulla conformità dei prodotti alle norme seguenti:

This declaration is based upon compliance of the products to the following standards:

Cette déclaration repose sur la conformité des produits aux normes suivantes:

Diese Erklärung basiert darauf, daß das Produkt den folgenden Normen entspricht:

Esta declaración se basa en el cumplimiento de los productos con las siguientes normas:

ETSI EN 301 489-17 v2.1.1, May 2009 : E LECTROMAGNETIC COMPATIBILITY AND R ADIO SPECTRUM

M ATTERS (ERM); E LECTRO M AGNETIC C OMPATIBILITY (EMC)

STANDARD FOR RADIO EQUIPMENT ; P ART 17: S PECIFIC CONDITIONS

FOR B ROADBAND D ATA T RANSMISSION S YSTEMS

ETSI EN 300 328 v1.7.1, October 2006 : E

LECTROMAGNETIC COMPATIBILITY AND

R

ADIO SPECTRUM

M

ATTERS

(ERM); W

IDEBAND TRANSMISSION SYSTEMS

; D

ATA

TRANSMISSION EQUIPMENT OPERATING IN THE

2,4 GH

Z

ISM

BAND

AND USING WIDE BAND MODULATION TECHNIQUES

; H

ARMONIZED

EN

COVERING ESSENTIAL REQUIREMENTS UNDER ARTICLE

3.2

OF

THE

R&TTE D

IRECTIVE

EN 60950-1, April 2006+A11:2009 : I NFORMATION TECHNOLOGY EQUIPMENT

P ART 1 : G ENERAL R EQUIREMENTS

- S AFETY -

Eugene, Oregon USA, October 27, 2010 B

RAD

W

EST

V

ICE

P

RESIDENT

- S

UPPLY

C

HAIN

O

PERATION

Australia

Datalogic Scanning Pty Ltd

Telephone: [61] (2) 9870 3200 [email protected]

France and Benelux

Datalogic Scanning SAS

Telephone: [33].01.64.86.71.00

[email protected]

Germany

Datalogic Scanning GmbH

Telephone: 49 (0) 61 51/93 58-0 [email protected]

India

Datalogic Scanning India

Telephone: 91- 22 - 64504739 [email protected]

Italy

Datalogic Scanning SpA

Telephone: [39] (0) 39/62903.1

[email protected]

Japan

Datalogic Scanning KK

Telephone: 81 (0)3 3491 6761 [email protected]

Latin America

Datalogic Scanning, Inc

Telephone: (305) 742-2206 [email protected]

Singapore

Datalogic Scanning Singapore PTE LTD

Telephone: (65) 6435-1311 [email protected]

Iberia

Datalogic Scanning SAS Sucursal en

España

Telephone: 34 91 746 28 60 [email protected]

United Kingdom

Datalogic Scanning LTD

Telephone: 44 (0) 1582 464900 [email protected]

“Este produto está homologado pela ANATEL, de acordo com os procedimentos regulamentados pela Resolução 242/2000, e atende aos requisitos técnicos aplicados.”

Para malores informaç õ es, consulte o site da ANATEL www.anatel.gov.br

Modelo: GBT4400

Agência Nacional de Telecomunicações

0105-11-4727

(01)07898916345857

“Este equipamento opera em caráter secundário, isto é, não tem direito a proteção contra interferência prejudicial, mesmo de estações do mesmo tipo, e não pode causar interferência a sistemas operando em caráter primário.” www.scanning.datalogic.com

Datalogic Scanning, Inc.

959 Terry Street

Eugene, OR 97402

USA

Telephone: (541) 683-5700

Fax: (541) 345-7140

©2010-13 Datalogic Scanning, Inc. 820052514 (Rev C) January 2013

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals