Untitled
Contents
Function illumination
Icon illumination displayed in LCD
2
3
4
Power status indication
Basic functions
Sound/Flash arm setting
Silent arm setting
Disarm
Car finding
Trunk release
Anti-hijacking
Door opening flashing (optional)
5
5
6
6
7
7
7
Alarm functions
8
8
9
9
10
10
10
11
11
Microwave sensor (optional)
Shock sensor
LED indicator
Door intruded alarming
ACC ON triggered
Emergency alarm
Siren pause
Emergency disarm
Triggering memory
Accessory functions
Time & Alarm clock& AUTO-ARM setting
Background light
Arm reminding and auto-arm (switch optional)
Central door locking automation
Arm responding automation (anti-false disarm)
Door locking reminding
Sensing reminding
Power off memory
Window roll up automation
Electrical /pneumatic central locking (optional)
Valet mode
Music audible reminding
Code learning
12
12
12
13
13
14
14
14
15
15
15
15
16
Function choosing on the brain unit
Technical data
Trouble shootings
Important notice
Notes for transmitter
Quality guarantee
16
1
17
18
20
20
21
Function illumination
R
R
O
O
R
Arm
Disarm
Silent (Mute) Arm
Arm
Press the button
on the transmitter once to lock the door and
arm the system with sound and flash;
Press the button again to enter car finding status (microwave
sensor in working); It can be shifted between two arming modes
by pressing the button repeatedly; Press the button for 2
seconds or more to enter the car finding status with sound/flash.
Press the button to lock the door during driving
Disarm
Press the button once to disarm the system, the central door
locking system would unlock;
Press the button during driving to unlock the doors.
Silent (Mute) Arm
Press the button once to lock the door in silent arm status;
Press the button
once again, the microwave sensor will work
in silent arm status;
It can be shifted between two arming modes by pressing the
button
repeatedly;
Press the button for 2 seconds or more to set car finding with
light.
Trunk release button
Press the buttons
at the same time for one second or more to
release vehicle trunk.
2
3
【Power status indication】
When the battery power is full, the icon shows“ ”
When battery power is weak“
” , press any button on the
transmitter will emit a sound “Di-Di” to remind weak power. The
battery should be replaced in time.
Only when icon“ ”flash, that means the battery run out of power.
Display works normally, but can not control. Replace the new battery
in time.
Basic Function
【Sound/Flash arm】
When parking, take car key off, close all doors, then press the
button once to lock the door, the LED indicator will gleam, the flash
lights will gleam once,the siren will chirp once.The transmitter remits a
sound “Bi-Bi”, and the arm icon and
are light on, side door icon is
flashing twice .
“
”
Press the button
once again, the LED indicator will gleam, the
flash lights will gleam once, the siren emits a sound like “Bi”, shock
sensor and microwave sensor are both working. Then a music sound
will remit from the transmitter.
And the icons
and
are light on, side door icon is flashing twice,
and background light turns green.
Note Only microwave sensor is fitted can this function be .
【Silent arm setting】
When parking, take car key off, close all doors, press button “
”
once to lock the door, the LED indicator will flash, the flash lights
will gleam once, the siren doesn't chirp, then it is in silent arm status,
shock sensor is working in this mode, then a music sound “Bi-Bi”
will remit from the transmitter, and the icons
and
are light on,
side door icon is flashing twice.
4
5
Press the button
again; shock sensor and microwave sensor are
working. In this mode, the LED indicator is flashing, the flash lights
will gleam once, the siren doesn't chirp, then a music sound will emit
form the transmitter, and the icons
and
are light on, side door
icon will gleam twice, background light turns green.
【Trunk release】
When engine is cut off, press the button“ ” for 1 second or more
to release trunk (a trunk release motor is fitted for this function),
Three sounds will emit from the transmitter, trunk release icon will
gleam for 5 seconds. Background light turns green.
Note: Only microwave sensor is fitted can this function be used.
【Disarm】
In arm with sound and flash mode, press the button
once, car door
is unlock, the flash lights will gleam twice, the siren will emit a
sound like “Du-Du”, the system will disarm. Then the transmitter
will emit a sound 'Bi-Bi”, side door icon on the transmitter will
gleam twice, then light on for 5 seconds. The icon
on the
transmitter will light on, the background light turns green.
In silent arm, the siren will not chirp.
【Anti-hijacking】
When driving, keep on press the button “ ” for 2 seconds or more to
set anti-hijacking, the flash lights will gleam, the siren will chirp
loudly, the turn signals flash, then the engine of vehicle will cut off
automatically 20 seconds later. Only press the button “ ” to pause
this function.
【Car finding】
If press the button “ ”on the transmitter for 2 seconds or more, the
siren will chirp for 10 seconds. The flash lights will gleam at the
same time.
If press the button “ ”on the transmitter for 2 seconds or more, the
flash lights will gleam for 10 seconds without siren chirping.
【Auxiliary signal output】
In engine cut off mode, press “
” and “
” for 1 second or more
at the same time, the brain unit output about 1 second negative
250mA signal (it can use for engine hood open etc)
Note:When there is flash/sound indication or flash indication on the
main unit,press any button would stop the indication signal.
6
7
Alarming Functions
Note: This system will return to original arm mode if it was
triggered and finish alarming
Microwave sensor(optional)
In arm, if somebody or object is moving
around and is detected by microwave
sensor for 5 seconds, the siren will
chirp 5 times, the engine will be cut off,
the flash lights will gleam, the
transmitter will remit sound like “Bi”
for 5 times with vibration for once to
remind the car owner. The icon of headlight and“ ”will be on, the
background light turns green, the transmitter alarm circularly once;
If it is detected for 15 seconds by microwave sensor, then the engine
will be cut off, the flash lights will gleam, the siren will chirp loudly
for 30 seconds to remind and warn the car owner. The transmitter
will remit a sound like “Bi-Bi-Bi” for 30 seconds, the icon of
headlight and“ ”will light on , the background light turns green,
and the transmitter is vibrating for 8 times.
In silent arm status, the siren will not chirp when the system is
triggered.
In disarm status, press he button “ ”or “ ” once, to set arm
mode without microwave sensor working, press the button “
”
or “ ” twice, to set arm mode with working of microwave sensor.
If parking under raining outside, then the raining will be
Note detected by microwave sensor and cause it to alarm. In
this case, the microwave sensor should be shut down by
transmitter to avoid false alarm.
Shock sensor
In arm with sound and flash status, if it is triggered by hit, the siren
will chirp 5 times, and the engine will be locked. The flash lights will
gleam at the same time. Then transmitter will make sound like “Bi”
for 5 times with vibration for one time to remind and warn the car
owner, and the shocking figure and flash lights icon on the
transmitter will light on at the same time. If it is triggered again by
hit within 15 seconds, then the siren will chirp loudly for 30 seconds
with flash lights gleaming. The transmitter will make sound like “BiBi-Bi” for 30 seconds, then vibrate for 8 times, vibrating icon and
flash lights icon will be light on.
8
In silent arm status, the siren will not chirp if it is triggered.
LED indicator
In arm status, the LED will flash with
interval of 2 seconds to remind and warn
that the car is in arm status.
If the alarm system is triggered by hit, the
LED indicator will flash continuously
during alarming. To remind the car owner
that it was triggered, the LED indicator will
flash 4 times continuously with interval of 2 seconds until disarmed
and turned ACC to ON position, if the alarm system is triggered by
door opened, ACC ON, brake pad, the LED indicator will keep
flashing until disarm and turned ACC to ON position.
Door intruding alarm
In arm status, if car door was opened or foot brake is pressed, it will
triggered system to alarm, the siren chirping for 30 seconds while
flash lights gleaming. The car is immobilized in this situation. To
remind and warn the owner, the remote transmitter will make sound
like 'Bi-Bi-Bi” for 30 seconds then vibrates for 8 times. In the mean
time, the side door and head light icon in the transmitter will blink.
The background light turns green.
9
ACC ON triggered
Emergency disarm
In arm status, if ACC ON is triggered, the siren will chirp for 30
seconds, the flash lights will gleam in the same time. The car is
immobilized in this situation. To remind and warn the owner, the
transmitter will make sound like “Bi-Bi-Bi “for 30 seconds, and
vibrates for 8 times. The alarm system will go back to the same status
before alarming.
In case of the transmitter is lost or damaged , just open any door by
the car key ( the alarm is triggered, the siren chirps and the flash
lights gleams), then press the footbrake and turn the ACC “Off/On”
10 times to disarm.
Triggering memory
In arm status, if the system triggered to alarm, the triggering
information would be recorded to remind car owner to check the car.
A: Alarm triggered by hit, to remind the car owner, the siren will
sound like “Du-Du” twice (it will not sound if it is in silent arm
setting), the LED indicator will gleam for 4 times continuously
with interval of 2 seconds until ACC is on.
Emergency alarm
In arming, any triggering such as door opened, ACC ON, foot brake
pad, will activate siren to chirp for 30 seconds while the flash lights
will gleam. The car is immobilized in this situation. To remind and
warn the owner, the transmitter will make sound like “Bi-Bi-Bi” for
30 seconds then vibrates for 8 times. In the mean time, the door icon
and head light icon in the transmitter will blink. The alarm system
then will reset itself. In emergency alarm status, if vibration is
triggered at the same time, it will be shown vibration icon on the
transmitter.
B: Alarm triggered by door opened, ACC, footbrake , to remind the
car owner, the siren will sound “Du” for 4 times (it will no sound
if it is in silent arm setting), the LED indicator will gleam
continuously until ACC is on.
When it is disarmed, if the car owner opens the car, the triggering
memory will remind the car owner that the alarm system was
triggered. If ACC ON, it will delete all triggering memory. When it is
disarmed without ACC ON, open the car door two times, it will
trigger to alarm. And then deleted, but the LED indicator can not
disarm.
Note The engine will be cut off for 40 seconds when it is alarming
by any triggering. Then the alarm system will go back into
arm status automatically. In case it is triggered again, it will
alarm again. In arm status, if it is detected that triggered for
sometime continuously, the system will alarm 4 minutes.
Siren pause
If the system is triggered to alarm, press the button “
halt alarm. The alarm system will reset itself.
10
” or “
” to
11
Auxiliary function
Time & Alarm / Auto-arm setting
Press the button and
at the same
time for 1 second to setting mode,
Press the button will switch settings
( t i m e s / m i n u t e , t i m e / h o u r, a l a r m
o n / o ff , a l a r m c l o c k / m i n u t e , a l a r m
clock/hour, auto-arm on/off, exit)
circularly. Press the button to adjust the setting data, then press the
button
for next setting adjustment. Press the buttons
and
at
the same time to save setting and exit the setting mode. Press
button
to exit without saving mode.
The alarming system will auto-arm by itself in silent mode if parking
without arming in 1 minute. The transmitter will make sound with
vibration to remind arming. Icon
and AUTO-ARM “will light on.
If this function is switch off, the system will not go into auto-arm
mode by itself, only reminding the car owner of arming the car.
R
Data setting
Time: hour and minute setting
Alarm: alarm ON/OFF, hour/minute setting; when it is alarming,
clock icon will blink with green background light.
Auto-arm: arm automatically. OFF means arm automation is off, ON
means arm automation is on.
Exit: press the button and
at the same time to save and exit the
setting mode.
Door opening flash lights setting
In ACC-ON status, press the button
for 2 seconds, the siren chirps
twice to set door opening flash lights.
Press the button
for 2 seconds, the siren chirps once to cancel this
function.
Note
The original setting is Door opening flash lights.
Background light of transmitter
Press the button and
once at the same time, the transmitter LED
background light turns green for view at night.
Arm reminding and auto-arm (switch optional)
There is a jumper (J4) on the brain unit for auto-arm. When car
engine is cut off without arming, the system will alarm with sound
emitting from siren to remind, the flash lights gleam for 3 times. If
the system is triggered by hit when the engine is cut off and door
closed within 10 seconds, the system will remind arming, the system
will emit sound like “Bi-Bi” for 3 times with vibration for 3 times if
the car parked without arming. And the icons
and
on the
transmitter remind arming.
12
Reminding:
This Auto-arm function is setting before sold.
Central door locking automation
Driving for 15 seconds then pressing the footbrake, the central door
locking system will lock automatically, while the central door
locking system will unlock automatically after engine cut off.
If car door is not lock well and 15 seconds later when driving, the
system will remind the driver with a sound “Du” for 3 times and flash
lights will gleam once.
When driving, press the button on the transmitter to lock car door,
press the button
to unlock.
Arm responding automation (anti-false disarm)
In arm status, press the button
to disarm, if the car door is not
opened within 25 seconds, the system will auto rearm by itself as it
regard it as false disarm. It will respond to transmitter to remind the
car owner.
In arm status, press the button
to disarm, if it detected the door
opened after 0.5 second (some cars will have dome light on), and
about 55 seconds later, it can not detected vibration, ACC or
triggered footbrake, the system will auto rearm by itself as it regard
it as false disarm. It will respond to transmitter to remind the car
owner.
Door locking reminding
In arm status, if car door is not locked well, after 10 seconds, the
system will remind the car owner with sound 3 times and flash lights
will gleam for 3 times. Then transmitter will response immediately.
After 15 seconds, if the door is still improperly locked, the siren will
chirp, flash lights gleam, the icon of headlight and side door would
gleam for around 30 seconds, the background light turns yellow, the
transmitter emits “Bi-Bi” for about 30 seconds and vibrates 8 times.
If the door is not locked well after a cycle of flash/sound arm, the arm
maintains until disarming or locking the door or 4 minutes later. (The
other triggers are working for arming).
13
Door locking reminding
Window roll up automation
In arm status, if car door is not locked well , after 10 seconds, the
system will remind the car owner with sound 3 times and flash lights
will gleam for 3 times. Then transmitter will response immediately.
The system will close car windows
automatically in arm mode status. (Only
need to be fitted with window roll up
module )
In arm, the car door doesn't close after
8 seconds later
Electrical /pneumatic locking optional
The siren will chirp
3 times
The flash light will gleam
3 times to remind the owner
After 15 seconds, if the door is still not locked well , the siren will
chirp, flash lights gleam, the icon of headlight and side door would
gleam for around 30 seconds, the background light turns yellow, the
transmitter emits “Bi-Bi” for about 30 seconds and vibrates 8 times.
If the door is not locked well after a cycle of flash/sound arm, the arm
maintains until disarming or locking the door or 4 minutes later. (The
other triggers are working for arming).
Sensing reminding
If transmitter can not receive any signal from the sensor in brain unit,
it will be indicated in the display of transmitter.
There is a jumper (J1) on the brain unit. Shift it to “electrical lock”
position, then press the button or to lock or unlock. (It was fitted
with electrical lock)
Shift it to “pneumatic lock” position, then press the button or to
lock or unlock. (It was fitted with pneumatic lock)
Reminding:
The default setting is electrical lock.
Valet mode
Activate this mode when park car for washing.
Switch ACC to ON position, press the button for 3 seconds, the
LED indicator will keep light on , then press the button
for one
time, a “Bi” sound from siren remind that it has been activated. In
this mode, only central door locking and trunk release is functioned
for the transmitter.
Switch ACC to ON position, then press the button for 2 seconds to
exit maintenance/washing mode.
Music audible reminding
If the transmitter is unable to
receive any signal from brain
unit in 2-3 minutes
Power off memory
If no action by transmitter, it will remind the operator with music.
That means the remote control is trying to connect the brain unit by
wireless radio, please try again later.
In case the security system is powered off, the setting status will be
restorable after power on.
14
15
Code learning
Keep pressing the code learning button, LED light will light on. Then
press any button on the transmitter, LED light will gleam twice, the
siren will chirp twice. The transmitter will respond with music, code
learning is successful. Press any button on the other transmitter, the
LED light will gleam 4 times, the siren will chirp 4 times. The
transmitter will respond with music, code learning for the other
transmitter is successful.
Technical data
Working frequency: 433-434MHZ
Modulated way: FSK
Brain unit:
Working voltage: 12V+_3V
Static current: ≤10mA (with shock sensor)
Siren volume: 105-125dB
Remote control:
Working voltage: 1.1-1.6V
Static current: ≤150uA
Function choosing on the brain unit
Default setting is marked with “ ”
(0.5S)
16
(3.5S)
17
10.Code Learning
The Icon shows the power is normal,while it can't
control the main unit,so please learn the code once
again.
18
19
Geographical Environment ,
20
21
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement