Model #: APSINT2012

Add to my manuals
4 Pages

advertisement

Model #: APSINT2012 | Manualzz

Tripp Lite

1111 West 35th Street

Chicago, IL 60609 USA

Telephone: +(773) 869 1234

E-mail: [email protected]

Model #: APSINT2012

PowerVerter APS INT Series Inverter/Charger - with Auto-Transfer Switching

Highlights

12V DC or 230V AC input; 230V, 50 Hz output (hardwired)

2000 watts continuous, 3000 watts OverPower™ and 4000 watts

DoubleBoost™ inverter output (see specifications)

3 stage, selectable 15/60 amp wet/dry cell battery charger

Auto Transfer Switching option for battery backup / UPS operation

Reliability enhanced large-transformer design with protected DC and AC wiring terminals

Description

Tripp Lite's APSINT2012 DC-to-AC inverter with automatic line-to-battery transfer and integrated charging system serves as an extended run UPS, a standalone power source or an automotive inverter. Supplies up to 2000 watts of continuous 230V AC power from any 12V battery or automotive

DC source. When hardwire AC input is energized, commercial power passes through to connected equipment and the battery set is recharged via 3 stage, selectable 15/60 amp charging system. In UPS mode, the APS system responds to blackouts and voltage fluctuations with a near instantaneous automatic transfer to battery-derived AC output. Includes a set of high current DC input terminals for simple installation (user supplies batteries and cabling - see owner's manual for recommendations). Passes sine wave utilty or generator power during battery charging and UPS line power operation, plus efficient PWM sine wave AC output in inverter and UPS backup modes. Reliable large transformer design, with frequency control powers resistive electronic loads or large inductive motors, compressors and other items with high current needs on startup. Optional

APSRM4 wired remote power switch with full status LEDs provides remote power inverter on/off switching and continuous status information

(APSRM4 sold separate). Supports an unlimited amount of runtime with any number of user-supplied batteries connected. Highly adaptable to a variety of applications and site conditions with adjustable charger settings for wet/gel battery types and selectable line to battery power transfer voltages.

Applications

Versatile inverter/charger system with auto-transfer switching serves as an automotive inverter for RVs, over-the-road trucking, conversion vans and fleet service vehicles; a standalone alternative power source for off-grid, alternative energy or export applications and as an uninterruptible power supply (UPS) for items compatible with a 20 millisecond transfer time.

Package Includes

APSINT2012 Inverter/Charger

Instruction manual with warranty information

Specifications

OVERVIEW

Intended

Application

SYSTEM OVERVIEW

Emergency Home Power

Voltage compatibility

OUTPUT

Frequency compatibility

Output watts

Continuous output capacity (watts)

Peak output capacity (watts)

Output nominal voltage

Output voltage regulation

Output frequency regulation

Overload protection

12VDC / 230VAC

50 Hz

2000

230V

LINE POWER (AC): Maintains 230V nominal sine wave output from line power source. INVERTER POWER (AC):

Maintains PWM sine wave output voltage of 230 VAC (+/-5%).

50 Hz (+/- 0.3 Hz)

Includes 10A input breaker dedicated to the charging system and 15A output breaker for AC output loads

Outlet quantity / type

INPUT

Recommended

Electrical Service

Maximum input amps / watts

Hardwire

DC INPUT: Full continuous load - 192A at 12VDC. AC INPUT: 17 amps at 230VAC with full inverter and charger load

(8.7A max charger-only / combined input load to support charger and AC output is automatically controllable to

66%-33%-0% based on AC output loading using the charger limiting set points - see manual for setting instructions)

DC INPUT: Set of 2 DC bolt-down terminals. AC INPUT: Hardwire via built in junction box with cover plate Input connection type

Input cord length

(ft.)

BATTERY

Expandable battery runtime

DC INPUT: User supplies cabling. 4 gauge or larger (see manual). AC INPUT: user supplies hardwire input cabling

Runtime is expandable with any number of user supplied wet or gel type batteries

DC system voltage 12V

Battery Pack

Accessory

(optional)

98-121 sealed lead acid battery (optional)

Battery recharge rate

Selectable 15 / 60 amp

LEDS ALARMS & SWITCHES

Switches 3 position on/off/remote switch enables simple on/off power control plus "auto/remote" setting that enables distant on/off control of the inverter system when used in conjunction with optional APSRM4 accessory when used in inverter mode.

In AC uninterruptible power mode, "auto/remote" setting enables automatic transfer from line power to battery power to maintain continuous AC power to connected loads.

Front panel LEDs Set of 6 LEDs offer continuous status information on load percentage (6 levels reported) and battery charge level (7 levels reported). See manual for sequences.

PHYSICAL

Shipping weight

(lbs)

Shipping weight

(kg)

46

20.9

Cooling method

Unit Dimensions

(HWD/in)

Unit Dimensions

(HWD/cm)

Shipping

Dimensions

(HWD/in)

Shipping

Dimensions

(HWD/cm)

Unit weight (lbs)

Multi-speed fan

7 x 8.5 x 14

17.78 x 21.59 x 35.56

13.25 x 15 x 21.13

33.66 x 38.1 x 53.66

42

Unit weight (kg)

Material of construction

Style

19.1

Polycarbonate

Heavy-duty with built-in battery charger

Form factors supported

Transfer time from line power to battery mode

Mounting slots enable permanent placement of inverter on any horizontal surface (see manual for additional mounting information)

ENVIRONMENTAL

Relative Humidity 0-95% non-condensing

LINE / BATTERY TRANSFER

20 milliseconds (typical - compatible with many computers, servers and networking equipment - verify transfer time compatibility of loads for UPS applications)

Low voltage transfer to battery power

In AC "auto" mode, inverter/charger switches to battery mode as line voltage drops to 144V (user adjustable to 163,

182, 201V - see manual)

High voltage transfer to battery power

In AC "auto" mode, inverter/charger switches to battery mode as line voltage increases to 259V (user adjustable to 264

- see manual)

SPECIAL FEATURES

Appearance Black color

Load Sensing Optional load sense function enables automatic inverter shutoff and startup as connected equipment is powered off and on. Front panel load sense potentiometer can be set to shutoff or turn on inverter power in response to loads of any level, up to 150 watts.

Yes Remote control capability

WARRANTY

Standard warranty period

(Outside the U.S. and Canada, call for warranty information)

Related Items

Optional Products

Product Type

Replacement Batteries

Inverter Accessories

External Battery Housings

Related Model

98-121

APSRM4

BP-260

Description

12V DC Sealed, Maintenance-Free Battery

Remote Control Module - for Tripp Lite Inverters and Inverter/Chargers

Ideal battery housing for use with Tripp Lite PowerVerter APS inverter/charger systems with a 12 or 24V DC system voltage.

More information, including related products, owner's manuals, and additional technical specifications, can be found online at www.tripplite.com/en/products/model.cfm?txtModelID=1339 .

© 2010 Tripp Lite. All Rights Reserved.

Qty.

-

-

-

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement