washroom accessories - Construction Building Components

washroom accessories - Construction Building Components
WASHROOM ACCESSORIES
12010_08 1
9/13/10 10:05 AM
ConturaSeries Accessories
®
Unique ConturaSeries TowelMate™,
Standard Feature at No Extra Charge,
Reduces Towel Usage up to 20%.
• Dispenses one towel at a time.
• Field installation into existing cabinets
without tools.
• Easy-load channel/retainer saves time.
• US EPA Reduce & Reuse Resource
Conservation Initiative compliance.
• Fabricated of 50%-70% recycled
stainless steel.
Unique ConturaSeries LinerMate®,
Standard Feature at No Extra Charge,
Improves Restroom Appearance.
• Liner overhang is eliminated.
• Gapless fit eliminates misdirected
trash from collecting outside liner.
• Saves maintenance time and expense
by reducing the frequency of liner
change-overs.
• Easy installation and removal of liners
without unlocking waste receptacle.
TowelMate and LinerMate Accessories
for Installation in Existing Models.
• TowelMates fit ConturaSeries units
manufactured before June 2010, and are
standard thereafter.
• LinerMates fit ConturaSeries waste
receptacles.
• Patents pending.
2
ConturaSeries Overview:
•Original curvilinear architectural
design for prestige restrooms.
•27° doors, flanges and panels.
•Drawn, one-piece seamless,
welded construction.
•Type 304 satin-finish stainless
steel on all exposed surfaces.
•Bobrick-keyed flush locks.
•Stainless steel piano-hinges.
•Green: Fabricated of 50%-70%
recycled stainless steel.
• ConturaSeries is a registered trademark of Bobrick Washroom Equipment, Inc.
Specify ConturaSeries
for Class A Properties:
• Corporate headquarters.
• Commercial office buildings.
• Upscale hotels and resorts.
• Specialty retail and fine dining.
• Museums and civic icons.
TrimLineSeriesΠAccessories
ClassicSeriesŠ Accessories
TrimLineSeries Overview:
• Doors have 90° return, concealed flanges.
• Type 304 satin-finish stainless steel on
all exposed surfaces.
• Bobrick-keyed tumbler locks.
• Green, fabricated of 50%-70% recycled
stainless steel.
ClassicSeries Overview:
• Traditional beveled flange treatment.
• Type 304 satin-finish stainless steel on
all exposed surfaces.
• Bobrick-keyed heavy duty locks.
• Green, fabricated of 50%-70% recycled
stainless steel.
Specify TrimLineSeries for a Clean,
Architectural Design Statement.
• Corporate headquarters.
• Commercial office buildings.
• Upscale hotels and resorts.
• Healthcare and hospitality.
Specify ClassicSeries Where Budget
is a Primary Concern.
• Mid-size commercial buildings.
• Industrial and manufacturing.
• Theaters and stadiums.
• Healthcare and transportation.
8QLTXH7RZHO0DWHUHGXFHVWRZHOXVDJHXSWR
)RUPRUHLQIRUPDWLRQLQFOXGLQJ/LQHU0DWH6HH3DJH
3
12010_08 3
9/13/10 10:05 AM
New TowelMate and LinerMate Accessories
Unique TowelMate Reduces Towel
Usage up to 20%.
• Dispenses one towel at a time.
• Field installation into existing cabinets
without tools.
• Easy-load channel/retainer saves time.
• US EPA Reduce & Reuse Resource
Conservation Initiative compliance.
• Fabricated of 50%-70% recycled
stainless steel.
Unique LinerMate Improves
Restroom Appearance.
• Liner overhang is eliminated.
• Gapless fit eliminates misdirected
trash from collecting outside liner.
• Saves maintenance time and expense
by reducing the frequency of liner
change-overs.
• Easy installation and removal of liners
without unlocking waste receptacle.
BEFORE
AFTER
Optional Accessory Specification.
• TowelMate and LinerMate are available
as optional accessories for all Bobrick
towel/waste units and those of many
major manufacturers.
• How to specify/order: Add TowelMate
and/or LinerMate accessory part
number to Bobrick towel/waste model
number. Example: B-3944 with 3944130 TowelMate, 3944-134 LinerMate.
TowelMate accessory fits TrimLine,
Classic series, Gamco and other
manufacturers’ existing units.
Patents pending.
Applications Model Numbers
Part No.
Bobrick
TrimLineSeries
3803-130
Applications Model Numbers
39003-130
Bobrick
ClassicSeries
B-3644, B-3942, B-3944, B-3949,
B-3961, B-39619, B-3974, B-3979
Gamco TW and
WR Series
TW-1, TW-1-6, TW-1C, TW-1F,
TW-1FS, TW-1M, TW-1MC, TW-14RP,
TW-14RPT, WR-6, WR-14
Other Mfrs.
12- gal. receptacles min. 14 ç"
wide, 6 Ω" deep, 22 ∂" high
B-3803, B-38032, B-380349,
B-39034
B-39003, B-390034, B-396034
B-35903, B-36903
Bobrick
ClassicSeries
B-3900, B-3904, B-3907, B-3909
Ï369-130
3803-130
B-3914, B-3942, B-3944, B-3947,
B-3949
Ï3944-130
B-359, B-369, B-3699
Ï369-130
B-262, B-2620, B-2621, B-26212
Ï262-130
Gamco TW Series TW: 1F, 1FS, 1C, 1D, 1M, 1MC, 1-18
TW: 2, 2F, 2FS, 2-4
4
LinerMate accessory fits
Classic series, Gamco and other
manufacturers’ existing units.
Patents pending.
Ï3944-130
3803-130
Gamco TD Series
TD: 2, 2M, 2-8, 3, 3F, 3FS, 8
Ï262-130
Other Mfrs.
Combination Towel/Waste similar to
B-3944 Series
Ï3944-130
Other Mfrs.
Surface-Mounted Towel Dispensers
similar to B-262 Series
Ï262-130
Part No.
Ï3944-134
TowelMate and LinerMate are standard features
on all new ConturaSeries towel dispenser and/or
waste receptacle models.
ƒ USA & Canada QuickShip model.
12010_08 4
9/13/10 10:05 AM
New Automatic, Universal Roll Towel Dispensers
Flexibility, Freedom and Savings.
• Dispenses universal, non-proprietary rolls.
• Eliminates proprietary paper purchasing contracts.
• Save as much as 30% or more by purchasing
economical universal, non-proprietary roll paper
towels from open-market distribution channels.
• Paper savings: adjustable towel lengths and time
delays, shorter lengths on second activation, stub
roll dispensing.
• Complies with US EPA Reduce & Reuse Resource
Conservation Initiative.
Functionality and Hygiene.
• Reduces risk of cross-contamination.
• Concealed towels assure hygiene and are intuitively
dispensed; no motion required.
• Extended 300,000-cycle, 1-year battery life; AC
adapter available.
• Green: 50%-70% recycled stainless steel.
Model B-2974
Surface-Mounted
B-3974 Recessed
Towel/Waste with
exploded view of
3974-50 Automatic
Roll Towel Dispenser
Module
Cost Saving features for Automatic,
Universal Roll Towel Dispensers
• Accepts economically-priced, universal, non-perforated, nonproprietary roll paper towels 8" (205mm) diameter, 8" (205mm)
wide, 800 ft (244m) long with 1 1⁄2" to 2" (38 to 51mm)
diameter standard core.
• Adjustable paper towel first dispense length: 9", 12", 15"
(230mm, 305mm, 380mm).
• Adjustable second dispense length: 25% and 12.5% of first
dispense.
• Adjustable second dispense time delay: 1, 2 or 3 seconds.
• Accommodates stub roll up to 3 1⁄2" (90mm) diameter with
automatic transfer.
3974-50
Automatic Module
Patented
B-2974
Surface-Mounted
Patented
B-29744
Semi-Recessed
Patented
Convert Existing Units to Automatic Roll Towel
Dispensing.
• Retrofit existing B-3944 and B-3900 folded towel
dispensers and other manufacturers’ similar models.
• Retrofit existing Bobrick B-3961 touch-free, pull-towel
mechanism roll towel dispensers.
• Convenient field installation utilizes the existing
recessed wall cabinet.
• Waste receptacle is also field-convertible from
12-gallon to 18-gallon (or vice versa).
Stand Alone Installation Options.
• Surface-mounted for renovation and new construction.
• Semi-recessed for 4" wall depth.
5
12010_08 5
9/13/10 10:06 AM
60
Being Green and Seeing Green
BOBRICK GREEN
Being Green and Seeing Green.
Environmental responsibility used to command a
premium price. Now, however, using less while still
delivering the appropriate level of service simply
costs less. This includes paper, soap, and electricity.
Not to mention reduced equipment replacement
cycles, and maintenance cost containment.
Reduce & Reuse.
Bobrick’s green leaf symbol is dispersed
throughout this new catalog to signify particular
products that save paper and/or reduce waste
by complying with the US EPA Reduce & Reuse
Resource Conservation Initiative.
Universal Roll Towel Dispensers Reduce
Towel Use up to 30%.
• Adjustable towel lengths.
• Shorter second pull lengths.
• Delayed second activation.
• Zero waste stub roll utilization.
TowelMate Reduces Towel Use up to 20%.
• Dispenses one towel at a time.
• Prevents dispensing by the handful.
SM
Universal Bulk Fill Soap Dispensers
Eliminate Cartridges.
• No more disposal of partially-filled cartridges.
• Substantially reduced landfill impact.
Recycled Restroom Accessory
Construction.
• 50%-70% recycled stainless steel used
for Contura, TrimLine and ClassicSeries.
• Robust fabrication stands up to
heavy use, abuse and vandalism and
reduces replacement cycles.
Toilet Partition Series.
• SCRC toilet partitions are manufactured
regionally and made of low-emitting materials.
• Plastic Laminate, Solid Phenolic and
®
SCRC materials have been GREENGUARD
Indoor Air Quality Certified by the
GREENGUARD Environmental Institute
under the GREENGUARD standard for
Low-Emitting Products.
• Toilet partition hardware fabricated
of 50%-70% recycled stainless steel.
Warm Air Hand Dryers Eliminate Paper
Towels Completely.
• Towel trash removal also eliminated.
• 95% cost savings compared to towel usage.
Koala Kare Baby Changing Stations.
• Fabricated of 50% recycled polyethylene
and stainless steel.
®
• Treated with Microban antimicrobial
product protection.
Technical Bulletins of Interest.
• TB-77 SierraSeries® LEED Certification Program.
• TB-87 Toilet Partition Material LEED Information
Program.
• TB-88 Washroom Accessories LEED Information.
®
• TB-89 GREENGUARD Toilet Partition
Material Certification Information.
Buy America Compliance
Many of the products contained
in this catalog comply with the
requirements of the Buy American
Act; Trade Agreements Act; American
Recovery and Reinvestment
Act – Buy American Provision;
Federal Transportation Administration’s Buy
America Act; Federal Highway Administration’s Buy
America Restriction; and/or the Federal Aviation
Administration’s Buy American Provision.
For information about a particular product please
contact [email protected] or
telephone (818) 503-1600.
In addition, a list of the country-of-origin of
Bobrick’s products can be obtained by visiting
www.bobrick.com. The country-of-origin for the
products contained in this list were determined
solely by applying the U.S. Customs and Border
Protection’s substantial transformation test.
6
12010_08 6
9/13/10 10:06 AM
Table of Contents
WASHROOM ACCESSORIE S:
&RPELQDWLRQ7RZHO:DVWH8QLWV
5HXVDEOH9LQ\O/LQHUV
3DSHU7RZHO'LVSHQVHUV
:DVWH5HFHSWDFOHV
6DQLWDU\1DSNLQ7DPSRQ9HQGRUV
6XUH)ORŠ6RDS'LVSHQVLQJ6\VWHP
/DYDWRU\0RXQWHG6RDS'LVSHQVHUV
6RDS'LVSHQVHUV
0LUURUV
:DUP$LU+DQG'U\HUV
TOILET COMPARTMENT ACCESSORIES:
7RLOHW7LVVXH'LVSHQVHUV
7RLOHW&RPSDUWPHQW$FFHVVRULHV
6DQLWDU\1DSNLQ'LVSRVDOV
&XELFOH&ROOHFWLRQ
7RLOHW6HDW&RYHU'LVSHQVHUV
*UDE%DUV
SPECIALTY PRODUCTS:
%DWKURRP$FFHVVRULHV
6KRZHU7XE$FFHVVRULHV
+RRNV6KHOYHV&XVWRGLDO$FFHVVRULHV
6SHFLPHQ3DVV7KUX&DELQHW
.RDOD.DUH&KLOG&DUH3URGXFWV
:DUUDQWLHV3DWHQWV
Numerical Product Index
ASSISTANCE WITH ADA COMPLIANCE.
)RUDIUHHFRS\RI%REULFN·V%DUULHU)UHH:DVKURRP
3ODQQLQJ*XLGHDQG:KHHOFKDLU0DQHXYHUDELOLW\
'UDZLQJ7HPSODWHSOHDVHWHOHSKRQH
RUYLVLWZZZEREULFNFRP
GAMCO RESTROOM ACCESSORIES IS THE
“GO-TO” LINE FOR BUDGET PROJECTS.
‡&RPSOHWHOLQHRIVWDLQOHVVVWHHOUHVWURRPDFFHVVRULHV
‡6SHFLDOL]LQJLQVKRUWUXQVDQGFXVWRPL]HGGLPHQVLRQV
‡6ROLGEUDVVEURQ]HDQGPXOWLFRORUPHWDODQGÀQLVKHV
‡0DQ\GLVFRQWLQXHG%REULFNSURGXFWVDUHDYDLODEOH
‡*DPFRDQG%REULFNVSHFLÀFDWLRQVFDQEHFRPELQHG
‡%X\$PHULFD&RPSOLDQFH
MODEL
NO.
B-155
B-1556 Series
B-156
B-165 Series
B-1658 Series
B-166 Series
204-1
204-2
204-3
B-207
B-211
B-2111
2111-79
B-2112
B-2116
B-212
B-221
B-223
B-224
B-2250
2250-3
B-2260
2270-3
B-2280
B-2300
B-232
B-233
B-239
B-2400
251-4
252-30
2521-30
2522-30
B-253
B-254
2583
2586
B-262
262-130
B-2620
B-2621
B-26212
B-263
B-264
B-265
B-270
270-12
B-2706 25
B-2706 50
B-272
B-273
B-2730
B-274
B-2740
B-2746
B-27460
B-275
275-14
B-277
B-279
279-14
283-604
B-2840
B-2860
B-287
B-2888
B-2890
B-2892
B-290 Series
B-2908 Series
B-292 Series
PAGE MODEL
NO. NO.
19
21
19
20
21
20
33
33
33
33
36
18
18
18
36
35
30
37
37
14
10
14
10
14
14
36
35
37
14
31
31
31
31
12
29
31
31
13
13
13
13
13
13
26
26
29
29
15
15
26
25
25
25
25
26
26
14
10
14
14
10
26
26
12
37
24
25
25
20
21
20
PAGE MODEL
NO. NO.
B-293 Series
21
B-294 Series
21
B-295
37
B-296
37
B-297
33
B-2974
12
B-29744
12
B-298
37
B-299
33
B-301
30
B-3013
30
B-306
18
B-3094
29
B-318
13
B-347
27
B-3471
27
B-3474
27
B-3479
27
B-353
28
353-12
27, 28, 29
B-35303
28
B-354
28
B-357
27
B-3571
27
B-3574
27
B-3579
27
B-359
13
B-35903
13
B-3644
14
367-60
8
368-16
10
368-60
8
B-369
11
369-130
11, 13
B-36903
11
B-3699
11
B-3706 25
15
B-3706 50
15
B-37063 25
15
B-37063 50
15
B-370634 25
15
B-370634 50
15
B-370639 25
15
B-370639 50
15
B-3803
10
3803-130
10
B-38032
10
B-38034
10
B-380349
10
B-386
24
B-3888
24
B-39003
10
B-3942
8
B-3944
8
3944-12
10
3944-130
8
3944-52
8
3944-134
8, 9, 14
B-3947
8
B-3949
8
B-3961
9
3961-50
9
B-39617
9
B-39619
9
B-397
33
B-3974
9
B-39747
9
3974-50
9, 12
3974-57
9, 12
B-3979
9
B-398
33
B-40
B-4063
B-4112
4112-79
B-42
B-4221
B-4262
B-4288
B-4353
B-4354
B-43644
43644-134
B-4369
4369-134
4369-22
B-43699
B-4380
B-4388
B-4390
B-43944
43944-134
B-43949
B-4706 25
B-4706 50
B-47064 25
B-47064 50
B-47069 25
B-47069 50
B-4998
B-505
B-5050
B-517
B-518
B-5181
B-5191
B-5221
B-526
B-5262
5262-25
B-5270
B-5277
5277-12
B-52860
B-5288
B-52891
B-529
B-530
B-541
B-542
B-543
B-544
B-5806 Series
B-5837
B-58616
B-5897
B-6047
B-6107
B-663
B-6637
B-667
B-6677
B-669
B-6697
B-6699
B-66997
B-670
B-6707
B-671
B-6717
B-672
B-6727
PAGE MODEL
NO. NO.
PAGE
NO.
19
18
18
18
19
30
13
24
28
28
14
8
11
8
10
11
34
24
34
8
8
8
15
15
15
15
15
15
31
37
19
34
34
34
34
30
11
13
13
29
14
10
12
25
25
14
32
25, 29
29, 35
25, 29
29, 36
31
31
31
31
33
33
24
24
24
24
24
24
25
25
35
35
35
35
35
35
32
32
32
32
32
35
35
32
31
32
31
36
36
32
26
26
26
31
31
26
32
31
24
24
24
24
25
25
23
23
23
22
22
12
12
22
22
22
35
35
35
35
26
26
26
26
16
16
17
17
17
17
17
17
16
32
21
36
36
39
38, 39
38, 39
38
38
39
39
39
39
39
38, 39
B-673
B-6737
B-674
B-6747
B-676
B-677
B-6777
B-680
B-6806 Series
B-6807
B-68137
B-682
B-6827
B-683
B-685
B-6857
B-686
B-6861
B-68616
B-6867
B-687
B-6897
B-697
B-6977
B-699
B-6997
B-6999
B-69997
B-700
B-708
B-710
B-7120
B-7128
B-72860
B-72974
B-740
B-748
B-750
B-7671
B-76717
B-7672
B-76727
B-7685
B-76857
B-7686
B-76867
B-81212
B-81312
B-822
B-8221
B-82216
B-8226
B-826
B-8263
B-830
B-8397
B-942
B-983
B-985
KB100-ST
KB101
KB102-00
KB110-SSRE
KB110-SSWM
KB111-SSRE
KB111-SSWM
KB112-01CT
KB112-01RE
KB150-99
KB200
7
12010_08 7
9/13/10 10:06 AM
Combination Towel/Waste Units
1"
25mm
NEW
15 3/16"
385mm
18 1/8"
460mm
56"
7RZHO0DWH
1420mm
54 1/8"
35 1/2"
1375mm
900mm
23"
585mm
/LQHU0DWH
4"
100mm
4 1/8"
17 3/16"
105mm
435mm
B-43944 Contura SeriesŠ RECESSED
ƒB-3944
Satin-finish stainless steel. Flush tumbler lock. Dispenses 600 C-fold or
800 multifold towels. Waste receptacle has 15.0-gal. (56.8-L) capacity;
extends 5 1⁄8" (130mm) from wall. Removable front panel for easy
cleaning. Rough Wall Opening: 16" W, 54 3⁄4" H, 4" min. depth (405 x
1390 x 100mm). Av. Mtg. Ht.: 67–74" (1700– 1880mm) to top of unit;
Barrier-Free, 61 1⁄4" (1555mm).
B-43949 Similar to B-43944, but with skirt for surface mounting.
ConturaSeries TowelMate/LinerMate
accessory part numbers for installation
in existing units. Patents pending.
ConturaSeries
TowelMate Part No.
B-4362
Ï3944-130
B-43644
N/A
LinerMate Part No.
N/A
43644-134
Unit includes convertible folded paper towel module and 12-gallon waste
receptacle module which can be interchanged with an automatic,
universal or touch-free roll towel module and 18-gallon waste receptacle
module, respectively. Cabinet is not replaced when changing modules.
Satin-finish stainless steel. Seamless beveled flange. Dispenses 600
C-fold or 800 multifold towels. Removable waste receptacle is locked
into cabinet. Receptacle is 8" (205mm) deep with capacity of 12-gal.
(45.5-L); extends 4 1⁄8" (105mm) from wall. Rough Wall Opening: 16"
W, 54 3⁄4" H, 4" min. depth (405 x 1390 x 100mm). Mtg. Ht.: 67–74"
(1700–1880mm) to top of unit; Barrier-Free, 60 1⁄2" (1535mm).
Patent pending.
B-3942 Similar to B-3944, but with skirt for semi-recessing in 2"
(50mm) walls.
B-3949 Similar to B-3944, but with skirt for surface mounting.
B-3947 Similar to B-3944, but with 18-gallon (68.0-L) waste receptacle.
B-4262, B-4369, B-43699
Ï369-130
4369-134
ƒ3944-134
B-43944, B-43949
Ï3944-130
43944-134
ƒ3944-130
B-277
N/A
Ï3944-134
INTERCHANGEABLE RECEPTACLES
Choose from 12 and 18-gallon waste receptacles
based on changing traffic and usage needs. Fits
B-3944, B-3961, B-3974 Series.
367-60 12-GAL.
RECEPTACLE
8
ClassicSeries RECESSED
CONVERTIBLE PAPER TOWEL DISPENSER/
WASTE RECEPTACLE
ƒ USA & Canada QuickShip model.
12010_08 8
368-60 18-GAL.
RECEPTACLE
LinerMate Accessory
TowelMate Accessory
INTERCHANGEABLE TOWEL D
Interchangeable towel dispenser modules allow
conversion from and to automatic roll towel,
touch-free roll towel, and folded towel.
3944-52 FOLDED TOWEL
DISPENSER MODULE
Patent pending
PAPER TOWEL DISPENSER/WASTE RECEPTACLE
WITH TowelMate AND LinerMate
USA QuickShip model.
9/13/10 10:06 AM
Combination Towel/Waste Units
1"
NEW
15 5/16 "
25mm
390mm
1"
25mm
15 3/16"
385mm
5 1/8"
5 1/8"
130mm
130mm
56"
56 "
1420mm
18 1/8"
18 1/8"
460mm
460mm
1420mm
35 1/2"
54 1/8"
900mm
1375mm
35 1/2"
900mm
48"
54 1/8"
1375mm
1220mm
max.
to
floor
23"
23"
585mm
585mm
3 15/16"
100mm
3 15/16"
100mm
4 1/8"
105mm
17 3/16"
17 3/16"
435mm
435mm
B-3961 ClassicSeries RECESSED
ƒB-3974
CONVERTIBLE PAPER TOWEL DISPENSER/
WASTE RECEPTACLE
Unit includes convertible universal, roll paper towel module and
12-gallon waste receptacle module which can be interchanged with an
automatic, universal or folded towel module and 18-gallon waste
receptacle module, respectively. Cabinet is not replaced when changing
modules. Satin-finish stainless steel. Seamless beveled flange. Touchfree, pull-towel mechanism dispenses 12" (305mm) length per pull of
universal roll paper towels. Accommodates 8" (205mm) wide, up to 8"
(205mm) diameter rolls, 800 ft (244m) long, plus 3 1⁄2" (90mm) diameter
stub roll with automatic transfer. Removable waste receptacle is locked
into cabinet. Receptacle is 8" (205mm) deep with capacity of 12-gal.
(45.5-L); extends 4 1⁄8" (105mm) from wall. Rough Wall Opening: 16" W,
54 3⁄4" H, 4" min. depth (405 x 1390 x 100mm). Av. Mtg. Ht.: 67–74"
(1700–1880mm) to top of unit; Barrier-Free, 60 1⁄2" (1535mm). Patented.
B-39619 Similar to B-3961, but with skirt for surface mounting.
B-39617 Similar to B-3961, but with 18-gallon (68.0-L)
waste receptacle.
ƒ3944-134
4 1/8"
105mm
LinerMate Accessory
ClassicSeries RECESSED CONVERTIBLE
AUTOMATIC, UNIVERSAL ROLL TOWEL DISPENSER/
WASTE RECEPTACLE
Convertible automatic universal, roll paper towel dispenser and 12-gal.
waste receptacle module can be interchanged with a universal, touchfree module or a folded towel module and 18-gal. waste receptacle,
respectively. Cabinet is not replaced when changing modules. Satin-finish
stainless steel. Seamless beveled flange. Removable waste receptacle
is locked into cabinet. Receptacle is 8" (205mm) deep with a capacity of
12-gal. (45.5L); extends 4 1⁄8" (105mm) from wall. Rough wall opening
16" W, 54 ¾" H, 4" min. depth (405 x 1390 x 100mm). Mtg. Ht.: 67-74"
(1700-1880mm) to top of unit. Barrier-Free, 60 ½" (1535mm). Battery
requirements: 4 Alkaline D Cells (not included). Patented.
B-3979 Similar to B-3974, but with 4" (100mm)
skirt for surface mounting.
B-39747 Similar to B-3974, but with 18-gallon Cost Saving features
(68.0-L) waste receptacle.
for Automatic, Universal
ƒ3944-134
LinerMate Accessory
3974-57 AC External Adapter (6V)
Roll Towel Dispensers
(see page 5)
available for B-3974, B-3979, B-39747 and 3974-50.
DISPENSER MODULES FOR B-3944, B-3961, B-3974 SERIES
Conversions are made without replacing
existing cabinets in the wall.
3974-50 AUTOMATIC
DISPENSER MODULE
Patent pending
3961-50 TOUCH-FREE, PULL
TOWEL DISPENSER MODULE
Patent pending
Each module dispenses universal, economically
priced paper products compared to proprietary
paper purchasing contracts.
9
12010_08 9
9/13/10 10:06 AM
Combination Towel/Waste Units
B-39003 TrimLineSeries RECESSED PAPER
TOWEL DISPENSER/WASTE RECEPTACLE
B-38032 TrimLineSeries SEMI-RECESSED
PAPER TOWEL DISPENSER/WASTE RECEP TACLE
Satin-finish stainless steel. Door has 90° return, conceals flange.
Dispenses 600 C-fold, 800 multifold or 1100 singlefold towels.
Removable leak-proof, 12-gal. (45.5-L) waste container. Rough Wall
Opening: 16" W, 54 3⁄4" H, 7 7⁄8" min. depth (405 x 1390 x 200mm).
Av. Mtg. Ht.: 67–74" (1700–1880mm) to top of unit; Barrier-Free,
60 1⁄2" (1535mm).
Satin-finish stainless steel. Door has 90° return, conceals flange.
Skirt for 4" (100mm) walls. Dispenses 600 C-fold, 800 multifold or
1100 singlefold towels. Uncovered, removable, leak-proof, 6.3-gal.
(24-L) waste container. Rough Wall Opening: 11 1⁄2" W, 53 5⁄8" H,
3 3⁄4" min. depth (290 x 1360 x 95mm). Av. Mtg. Ht.: 67–74"
(1700–1880mm) to top of unit; Barrier-Free, 60 3⁄4" (1545mm).
39003-130 TowelMate Accessory
3803-130 TowelMate Accessory
TowelMate TOWEL
DISPENSER/RETAINER
ACCESSORY
See page 4 for TowelMate accessory part
numbers and ordering information for
application in ClassicSeries, TrimLineSeries,
Gamco, and similiar models of other
manufacturers. See pages 2 and 8 for
ConturaSeries TowelMate information.
LinerMate LINER
RETAINER ACCESSORY
See page 4 for LinerMate accessory part
numbers and ordering information for
application in ClassicSeries, Gamco, and
12-gallon waste receptacles of other
manufacturers. See pages 2 and 8 for
ConturaSeries LinerMate information.
B-3803 TrimLineSeries RECESSED PAPER
TOWEL DISPENSER/WASTE RECEPTACLE
Satin-finish stainless steel. Door has 90° return, conceals flange
Dispenses 600 C-fold, 800 multifold or 1100 single-fold towels.
Removable, leak-proof, 6.3-gal. (24-L) waste container. Rough Wall
Opening: 11 1⁄2" W, 53 5⁄8" H, 5 3⁄4" min. depth (290 x 1360 x 145mm).
Av. Mtg. Ht.: 67–74" (1700–1880mm) to top of unit; Barrier-Free,
60 3⁄4" (1545mm).
3803-130 TowelMate Accessory
B-38034 Similar to B-3803, but requires 3 3⁄4" (95mm) min. depth.
Waste capacity: 3.8-gal. (14.4-L). Dispenses C-fold and multifold towels.
B-380349 Similar to B-38034, but with skirt for surface
mounting.
10
ƒ USA & Canada QuickShip model.
12010_08 10
REUSABLE HEAVY-GAUGE VINYL LINERS:
PART NO.
FOR MODEL NO.
%%%%%
%%%
368-16
%%
4369-22
%%
2250-3
%%
2270-3
%
275-14
%
279-14
%
5277-12
%
ƒ 3944-12
USA QuickShip model.
9/13/10 10:06 AM
Combination Towel/Waste Units
NEW
10 7/8"
275mm
7RZHO0DWH
10 3/4"
275mm
28"
26 1/8"
710mm
665mm
15 1/4"
385mm
10
/LQHU0DWH
1/ "
2
265mm
3 15/16"
100mm
2 1/2"
12 3/4"
65mm
325mm
B-4369 ConturaSeries RECESSED PAPER
TOWEL DISPENSER / WASTE RECEPTACLE WITH
TowelMate AND LinerMate
Satin-finish stainless steel. Flush tumbler lock. Dispenses 350 C-fold or
475 multifold towels. Waste receptacle has 3.0-gal. (11.3-L) capacity;
extends 2 1⁄2" (65mm) from wall. Removable front panel for cleaning. Wall
Opening: 11 3⁄8" W, 26 5⁄8" H, 4" min. depth (290 x 675 x 100mm). Av.
Mtg. Ht.: 71" (1805mm) to top of unit; Barrier-Free, 52 3⁄4" (1340mm).
B-43699 Similar to B-4369, but with skirt for surface mounting.
Note: See page 8 for TowelMates and LinerMates for existing units.
B-36903 TrimLineSeries RECESSED PAPER
TOWEL DISPENSER/WASTE RECEPTACLE
Satin-finish stainless steel. Door has 90° return, conceals flange.
Dispenses 300 C-fold or 400 multifold towels. Removable, leak-proof,
1.6-gal. (6.1-L) waste container. Rough Wall Opening: 11 1⁄2" W, 29 1⁄2" H,
3 3⁄4" min. depth (290 x 750 x 95mm). Av. Mtg. Ht.: 69" (1753mm) to
top of unit; Barrier-Free, 51" (1295mm).
ƒ369-130
TowelMate Accessory
Countertop Towel Dispenser
B-369 ClassicSeries RECESSED PAPER
TOWEL DISPENSER/WASTE RECEPTACLE
Satin-finish stainless steel. Seamless beveled flange. Dispenses 350
C-fold or 475 multifold towels. Knob-latch retains door. Removable
waste container has 2-gal. (7.6-L) capacity. Rough Wall Opening:
12 5⁄8" W, 26 5⁄8" H, 4" min. depth (320 x 675 x 100mm). Av. Mtg. Ht.:
71" (1805mm) to top of unit; Barrier-Free, 51 1⁄2" (1310mm).
ƒ369-130
TowelMate Accessory
ƒB-3699 Similar to B-369, but with stainless steel skirt for surface
mounting.
B-526 TrimLineSeries COUNTERTOP
MOUNTED PAPER TOWEL DISPENSER
Satin-finish stainless steel. Flange has 90° return. Towels load into top
of dispenser. Dispenses 300 C-fold or multifold towels. Unit 12 ¾" W,
6" front to back depth (325 x 150mm); 17" (430mm) min. clearance
below mounting surface is required. Rough Countertop Cutout: 12 ¼" W
(310mm), 4 ½" front to back depth (115mm), ¾" to 1 ½" (19 to 38mm)
mounting thickness. Housing below countertop to conceal dispenser
is not included. Barrier-free countertop must not exceed 34" (865mm)
height, and have a clearance of at least 29" (735mm) from the bottom of
the apron to the finish floor.
11
12010_08 11
9/13/10 10:06 AM
Paper Towel Dispensers
NEW
Cost Saving features
for Automatic, Universal
Roll Towel Dispensers
(see page 5)
ƒB-2974
AUTOMATIC, UNIVERSAL SURFACEMOUNTED ROLL TOWEL DISPENSER
Satin-finish stainless steel. Door has tumbler lock and piano-hinge. Unit
15 ≈" W, 18 ¼" H, 9 √" D (385 x 465 x 230mm). Barrier-Free,
60-66" (1525-1675mm). Battery requirements: 4 Alkaline D Cells (not
included). Patented.
3974-57 AC External Adapter (6V) available.
NEW
ƒB-2860
SURFACE-MOUNTED ROLL
TOWEL DISPENSER
Satin-finish stainless steel. Touch-free, pull-towel mechanism dispenses
12" (305mm) length per pull [1.8 lbs (8.0 N)] of universal towels.
Accommodates 8" (205mm) wide, up to 8" (205mm) diameter rolls, 800 ft
(244m) long, plus 3 1⁄2" (90mm) dia. stub roll with automatic transfer. Door
has tumbler lock and piano-hinge. Unit 11 3⁄4" W, 15" H, 9" D (300 x 380 x
230mm). Av. Mtg. Ht.: 67–74" (1700–1880mm) to top of unit; Barrier-Free
60–66" (1525–1675mm). Patented.
1"
25mm
17 3/16"
435mm
18 3/8"
20 1/4"
465mm
4"
100mm 5 1/8"
130mm
515mm
Cost Saving features
for Automatic, Universal
Roll Towel Dispensers
(see page 5)
15 3/16"
385mm
B-29744 AUTOMATIC, UNIVERSAL SEMI-RECESSED
ROLL TOWEL DISPENSER
Similar to B-2974 with seamless satin-finish stainless steel beveled
flange. Designed for semi-recessed installation in wall opening 16" W,
18 Ω" H, 4" D (405 x 480 x 100mm). Extends 5 ß" (130mm) from
wall. Patented.
3974-57 AC External Adapter (6V) available.
B-72860 SURFACE-MOUNTED ROLL PAPER
TOWEL DISPENSER
Durable plastic construction; translucent cover. Touch-free, pull towel
mechanism dispenses 12" (305mm) length per pull [1.8 lbs (8.0 N)] of
universal towels. Accommodates 8" (205mm) wide, up to 8" (205mm)
diameter rolls, 800 ft (244m) long, plus 3 1⁄2" (90mm) diameter stub roll
with automatic transfer. Locking cabinet with removable and permanent
keys. Unit 12 1⁄2" W, 15 1⁄2" H, 9 1⁄2" D (320 x 395 x 240mm). Patented.
NEW
Cost Saving features
for Automatic, Universal
Roll Towel Dispensers
(see page 5)
3974-50 AUTOMATIC, UNIVERSAL ROLL TOWEL
DISPENSER MODULE
Satin-finish stainless steel. Interchangeable convertible module designed
for installation in B-3944 and B-3961 purchased after July 2006, or for
retro-fitting in earlier B-3900 and B-3944 models, and other manufacturers’
similar units. Extends 5 ß" (130mm) from wall. Patented.
3974-57 AC External Adapter (6V) available.
B-52860 MatrixSeries SURFACE-MOUNTED ROLL
PAPER TOWEL DISPENSER
Durable ABS plastic; grey color. Delivers preset length of paper towel:
2" or 4" (50 or 100mm) per stroke. 4" (100mm) stub roll. Accepts
standard core rolls 7 1⁄4" to 8" (185 to 205mm) wide, up to 8"
diameter (205mm). Unit 11 5⁄8" W, 15 1⁄16" H (295 x 385mm),
wall to lever 10 1⁄8" (255mm). Patented.
NEW
Cost Saving features
for Automatic, Universal
Roll Towel Dispensers
(see page 5)
ƒB-72974
AUTOMATIC, UNIVERSAL SURFACEMOUNTED ROLL TOWEL DISPENSER
B-253 SURFACE-MOUNTED ROLL
TOWEL DISPENSER
Durable plastic construction; translucent navy cover. Locking cabinet. Unit
12 3⁄8" W, 15 ¼" H, 9 ½" D (310 x 385 x 240mm). Operates with 4 “D”
alkaline batteries (not included) or 6-volt DC power supply. Patented.
Heavy-duty aluminum casting, satin finish. Molded plastic spindle
has concealed locking device; removed with special key furnished.
Controlled delivery. Holds paper towel rolls up to 6" (150mm) diameter.
Unit 12 1⁄2" wide and projects 4 7⁄8" from wall (320 x 125mm).
3974-57 AC External Adapter (6V) available.
12
ƒ USA & Canada QuickShip model.
12010_08 12
USA QuickShip model.
9/13/10 10:06 AM
Paper Towel Dispensers
B-359 ClassicSeries RECESSED
ƒB-2621
ClassicSeries SURFACE-MOUNTED
PAPER TOWEL DISPENSER
PAPER TOWEL DISPENSER
Satin-finish stainless steel. Seamless beveled flange. Dispenses 350
C-fold or 475 multifold towels. Door equipped with full-length stainless
steel piano-hinge at bottom; swings down for easy filling. Rough Wall
Opening: 11 1⁄4" W, 15 5⁄8" H, 4" min. depth (285 x 395 x 100mm). Av.
Mtg. Ht.: 67" (1700mm) to top of unit; Barrier-Free, 52 1⁄2" (1335mm).
Satin-finish stainless steel. Dispenses 200 C-fold or 275 multifold
towels. Door has knob-latch. Hemmed towel tray opening. Unit
10 3⁄4" W, 7 1⁄8" H, 4" D (275 x 180 x 100mm). Av. Mtg. Ht.: 58–62"
(1475–1575mm) to top of unit; Barrier-Free, 47" (1195mm).
B-26212 Similar to B-2621, but with tumbler lock.
ƒ369-130
TowelMate Accessory
ƒ262-130
B-35903 TrimLineSeries RECESSED
PAPER TOWEL DISPENSER
Satin-finish stainless steel. Door has 90° return, conceals flange.
Dispenses 300 C-fold or 400 multifold towels. Rough Wall Opening:
11 1⁄2" W, 17 1⁄4" H, 3 œ" min. depth (290 x 440 x 95mm).
Av. Mtg. Ht.: 67" (1700mm) to top of unit; Barrier-Free, 52" (1320mm).
ƒ369-130
TowelMate Accessory
ƒB-263
SURFACE-MOUNTED PAPER
TOWEL DISPENSER
Satin-finish stainless steel. Tumbler lock on top of cabinet. Dispenses
400 singlefold towels. Cabinet slots indicate refill time. Unit 12 1⁄8" W,
7 1⁄4" H, 6 1⁄8" D (310 x 185 x 155mm).
TowelMate Accessory
NEW
ƒB-4262
ConturaSeries SURFACE-MOUNTED
PAPER TOWEL DISPENSER WITH TowelMate
Satin-finish stainless steel. Tumbler lock on top of cabinet. Door swings
down for loading towels. Dispenses 400 C-fold or 525 multifold towels.
Cabinet slots indicate refill time. Unit 10 13⁄16" W, 13 1⁄4" H, 4 7⁄ 8" D
(275 x 335 x 125mm).
Note: See page 8 for TowelMates for existing units.
ƒB-262
ClassicSeries SURFACE
B-318 RECESSED PAPER TOWEL DISPENSER
Satin-finish stainless steel. Dispenses 600 C-fold or 800 multifold
towels. Towels load into bottom of cabinet concealed behind wall or
mirror; only the towel tray is visible. Rough Wall Opening: 12" W, 18 1⁄4" H
(305 x 465mm) to accept cabinet height, plus 6" (150mm) min. clearance
space below towel tray; 4 1⁄2" (115mm) min. depth. Av. Mtg. Ht.: 68–73"
(1725–1855mm) to top of unit; Barrier-Free, 56 3⁄4" (1440mm).
ƒB-5262
MatrixSeriesΠSURFACE-MOUNTED
MOUNTED PAPER TOWEL DISPENSER
PAPER TOWEL DISPENSER
Satin-finish stainless steel. Dispenses 400 C-fold or 525 multifold towels.
Door has tumbler lock and piano-hinge. Hemmed towel tray opening.
Unit 10 3⁄4" W, 14" H, 4" D (275 x 355 x 100mm). Av. Mtg. Ht.: 66–70"
(1675–1780mm) to top of unit; Barrier-Free, 54" (1370mm).
Durable ABS plastic; grey color. Dispenses 400 C-fold or 525 multifold
towels. Cabinet slots indicate refill time. Door has concealed locking
device. Unit 11 1⁄2" W, 15 1⁄4" H, 4 3⁄4" D (290 x 385 x 120mm). Patented.
5262-25 INTERNAL TOWEL TRAY ADAPTER KIT Optional
for B-5262 to dispense narrower paper towels 2 1⁄2"–3 1⁄8" (64–79mm) deep.
B-2620 Similar to B-262, but with knob-latch.
TowelMate Accessory
ƒ262-130
13
12010_08 13
9/13/10 10:06 AM
Waste Receptacles
15 1/4"
NEW
B-2250 FLOOR-STANDING WASTE
3/ "
4
390mm
19mm
RECEPTACLE WITH TOP
27
3/ "
4
705mm
25 7/8"
655mm
20
/LQHU0DWH
7/ "
8
530mm
Satin-finish stainless steel. Top with self-closing doors.
Vinyl wall bumper, rubber feet. Hooks for liners. Capacity:
13-gal. (49.2-L). Unit 12 1⁄2" x 12 1⁄2" (320 x 320mm) at
top, 29 1⁄2" (750mm) high.
3 7/8"
100mm
5 1/16"
130mm
17 1/4"
440mm
B-43644 ConturaSeries RECESSED
WASTE RECEPTACLE WITH LinerMate
Satin-finish stainless steel. Removable front panel for easy cleaning.
Capacity: 12.8-gal. (48.3-L). Rough Wall Opening: 15 7⁄8" W, 26 1⁄4" H,
4" min. depth (405 x 665 x 100mm). Universal/Barrier-Free Mtg. Ht.:
43–47" (1090–1195mm) to top of unit.
Note: See page 8 for LinerMates for existing units.
NEW
15 1/8"
385mm
23"
585mm
/LQHU0DWH
8 1/2"
215mm
ƒ B-277
ConturaSeries SURFACE-MOUNTED
WASTE RECEPTACLE WITH LinerMate
Satin-finish stainless steel. Capacity: 12.75-gal. (48.3-L). Top edges are
hemmed and bottom of waste receptacle has recessed finger grip for
safe handling. Unit 15 1⁄8" W, 23" H, 8 1⁄2" D (385 x 585 x 215mm).
Note: See page 8 for LinerMates for existing units.
ƒ B-3644
ClassicSeries RECESSED
B-2280 FLOOR-STANDING OPEN-TOP
WASTE RECEPTACLE
Satin-finish stainless steel. Open top. Vinyl wall bumper,
rubber feet. Liner hooks. Capacity: 21-gal. (79.5-L). Unit
14" x 14" (355 x 355mm) at top, 30" (760mm) high.
B-2260 Similar to B-2280, but with 13-gal. (49.2-L)
capacity. Unit 12 1⁄2" x 12 1⁄2" (320 x 320mm) at top, 22"
(560mm) high.
B-2300 FLOOR-STANDING DOME-TOP
WASTE RECEPTACLE
Satin-finish stainless steel body with black steel-domed
top. Removable top with fingerprint-resistant textured
powder coated finish has 6" (150mm) diameter opening
for hygienic, no-touch disposal of waste. Galvanized steel
liner has grommeted lift holes. Capacity: 18-gal. (68-L).
Unit 15" diameter, 31" H (380 x 785mm).
B-2400 FLOOR-STANDING LARGECAPACITY WASTE RECEPTACLE
Satin-finish stainless steel. Removable funnel top with
8 1⁄4" (210mm) diameter opening for hygienic, no-touch
disposal of waste. Four heavy-duty rubber feet. Galvanizedsteel waste container has handle for easy removal.
Capacity: 33-gal. (125-L). Unit 18 1⁄4" diameter, 32" high
(465 x 815mm).
B-5277 MatrixSeries SURFACE-MOUNTED
WASTE RECEPTACLE
WASTE RECEPTACLE
Satin-finish stainless steel. Seamless beveled flange. Removable, 12-gal.
(45.4-L) receptacle locks into cabinet. Hooks hold optional vinyl liner. Rough
Wall Opening: 16" W, 29 1⁄4" H, 4" min. depth (405 x 745 x 100mm).
Universal/Barrier-Free Mtg. Ht.: 42–46" (1065–1170mm) to top of unit.
Impact-resistant polymer; grey color. Capacity: 13-gal. (49.2-L). Clips
secure optional vinyl liner. Unit 17" W, 23" H, 9 1⁄2" D (430 x 585 x
240mm). Patented.
ƒ3944-134
LinerMate Accessory
ƒB-279
ClassicSeries SURFACE
MOUNTED WASTE RECEPTACLE
Satin-finish stainless steel. Bottom edges
hemmed for safety. Hooks hold furnished
reusable vinyl liner; removable for servicing.
Capacity: 6.4-gal. (24.2-L). Unit 14" W, 18" H,
6" D (355 x 455 x 150mm).
B-275 SURFACE-MOUNTED WASTE
RECEPTACLE
Satin-finish stainless steel. Bottom edges
hemmed for maximum safety. Hooks hold
furnished reusable vinyl liner; removable for
servicing. Capacity: 20-gal. (75.7-L). Unit 16 1⁄2"
W, 23" H, 12 1⁄2" D (420 x 585 x 320mm).
14
ƒ USA & Canada QuickShip model.
12010_08 14
B-529 COUNTERTOP-MOUNTED CIRCULAR
WASTE CHUTE
Rolled flange and exposed surfaces bright-polished stainless steel.
Outside diameter 6 15⁄16" (175mm), inside diameter 5 1⁄2" (140mm),
chute depth 5" (130mm). Rough Countertop Cutout: 5 5⁄8" diameter
(140mm). Provides waste deposit access to receptacle (not furnished)
placed under countertop. Universal/Barrier-Free: countertop must not
exceed 34" (865mm) height and have a clearance of at least 29"
(735mm) from the bottom of the apron to the finish floor.
USA QuickShip model.
9/13/10 10:06 AM
New ADA-Compliant Napkin/Tampon Vendors
• Returned coins or wrong coins (1¢, 5¢,
10¢) by-pass mechanism and drop into
product tray.
• Empty product indicator automatically
blocks coin slot.
• Easy product loading, no weights.
• Holds 30 tampons, 20 napkins.
• Two tumbler door locks keyed like other
Bobrick accessories.
• Separately-keyed coin box lock for
management access.
• Easy 25¢ to 50¢ field coin conversion.
• Type 304 satin-finish stainless steel
on exposed surfaces.
Push-Button Operation, Less
Than 5 Lb of Force, No Grasping,
Pinching or Twisting of the Wrist
• Meets ADA-ABA and ICC/ANSI
Accessibility Guidelines for
Operation.
• Easy access product tray.
• Single-coin slots are key to
jam-resistant operation.
• Accepts one or two quarters
(U.S. or Canadian).
• Push-button coin return cancels
product selection.
• Patented.
11 7/8"
300mm
11 7/8"
300mm
11 7/8"
300mm
28 3/8"
720mm
25 7/8"
5 9/16"
140mm
14 3/8"
2 15/16" 365mm
75mm
2 1/2"
65mm
ClassicSeries
B-4706 25 RECESSED*
B-37063 25 RECESSED*
B-4706 50
B-37063 50
Door with 27° arc and two flush door
locks; soft radius on edges and corners.
Flat door design has 90° returns,
conceals flange.
B-47064 25 SEMI-RECESSED
ƒ B-370634
ƒ B-3706
25 RECESSED*
OR SEMI-RECESSED
B-3706 50
25 SEMI-RECESSED*
B-47064 50
B-370634 50
Similar to B-4706, but with stainless steel
skirt for semi-recessing in 4" (100mm)
deep walls.
Similar to B-37063, but with stainless steel
skirt for semi-recessing in 4" (100mm)
deep walls.
B-47069 25 SURFACE
B-370639 25 SURFACE
MOUNTED
B-47069 50
MOUNTED
B-370639 50
Similar to B-4706, but with stainless steel
skirt for surface mounting.
Similar to B-37063, but with stainless steel
skirt for surface mounting.
Series Model
No.
Contura
Series®
B-4706
Recessed
n/a
See Illustration
Rough Wall RWO Min. Average
Opening
Depth
Mounting
(RWO)
Height
WxH
1 ¾"
45 mm
B-47069
Surface
14 å" x 28 å" x 8 æ"
5 ¾"
n/a
145 mm 370x725x220mmm
B-37063
Recessed
n/a
See Illustration
B-370634
SemiRecessed
B-370639 Surface
Classic
Series®
1 Δ"
45 mm
n/a
Adj.
Flange
See Illustration
5 å"
12 ½" x 26 ∂" 140mm
320mm x
4"-5 å" 100670mm
140mm
SemiRecessed
n/a
11 Ω" x 25 Ω" x 8"
300x660x205mm
B-2706
Surface
n/a
n/a
n/a
Adjustable seamless beveled flange allows
fully-recessed installation in 6" (150mm)
deep walls or semi-recessed installation
in 4" to 6" (100 to 150mm) deep walls.
Projection
from wall
(incl. push
button)
*2 ∫"
(75mm)
4 æ"
(115mm)
8 æ"
(220mm)
n/a
12 ½" x 26 ∂" 5 æ"
320mm x
140mm
670mm
3 Ω"
100mm
14" x 28" x 8"
5 æ"
140 mm 355x710x205mm
Recessed
B-3706
BarrierFree
Mounting
Height
5 æ"
12 ½" x 26 ∂" 140mm
320mm x
3 ∫"
670mm
100mm
SemiRecessed
B-47064
TrimLine
Series™
Mounting Skirt / Unit Measures
Flange W x H x D
Depth
4" to 5 1/2"
100 to 140 mm
13 7/8"
2 1/2" to 4" 335mm
65 to 100 mm
13 7/8"
355mm
TrimLineSeries
ConturaSeries
113/16"
285mm
111/4"
285mm
11 1/2"
290mm
5 9/16"
145mm
27 7/8"
710mm
25 7/8"
700mm
28"
710mm
25 7/8"
700mm
700mm
73" to 77"
to the top
of the unit.
(1855x1955
mm)
63" to the
top of the
unit.
(1600 mm)
*2 å"
(65mm)
*4.0"
(100mm)
ƒ B-2706
25 SURFACE
MOUNTED
B-2706 50
Similar to B-3706 without adjustable flange
for surface mounting.
8.0"
(205mm)
*2 å"
(65mm)
*4.0"
(100mm)
*Complies with ADA-ABA and ICC/ANSI
Protruding Objects Limit of maximum 4"
(100mm) protrusion into circulation path
depending on wall depth.
8.0"
(205mm)
15
12010_08 15
9/13/10 10:06 AM
SureFlo Soap Dispensing System
BOBRICK SureFloŠSOAP SYSTEM
SureFlo SOAP SYSTEM CABINET
Accommodates one 12-liter (13,000 handwashes) SureFlo Soap Cartridge.
Cabinet is equipped with a concealed 2-liter (2,000 handwashes) soap
reservoir. Cabinet is constructed of type 304 stainless steel. Door has
satin finish and tumbler lock, keyed like other Bobrick washroom
accessories. Cabinet is equipped with Low Soap Indicator (LSI) Light.
Cabinet is mounted under lavatory countertop on left or right side walls,
or rear wall. Includes tubing and connectors. Cabinet furnished with one
12-liter cartridge of Bobrick SureFlo Soap. Cabinet 10" W, 15 1⁄4" H in
front, 16 1⁄2" H in rear, 18 5⁄8" D (255 x 385–420 x 475mm). Patented.
B-830.12 Soap System Cabinet with one 12-liter cartridge of
Pink Lotion SureFlo Soap.
HOW TO SPECIFY/ORDER:
B-830.12 , or B-830.13 Soap System Cabinet.
830-359 or 830-372 Soap Dispenser Soap Pump, Mounting
Shank Kit.
830-341 Connector Kit. One kit required for each soap dispenser.
SureFlo SOAP SYSTEM SOAP CARTRIDGES
Formulated especially for Bobrick B-830 Series Lavatory-Mounted
Soap Dispenser Systems.
B-81312 Premium Gold Soap, 12-liter (13,000 handwashes)
ƒB-81212 Pink Lotion Soap, 12-liter (13,000 handwashes)
B-830.13 Soap System Cabinet with one 12-liter cartridge of
WARRANTY
Premium Gold SureFlo Soap.
Only Bobrick SureFlo Soaps should be used in B-830 Series LavatoryMounted Soap Dispenser SureFlo Soap System. Use of any other soap will
void the warranty provided for the B-830 Series Soap Dispensers used in
the SureFlo Soap System. See page 40 for warranties and limitations on
Bobrick’s SureFlo Soap System.
B-830 SOAP DISPENSER SOAP PUMP (360° FREE
TURNING), MOUNTING SHANK KITS
One kit required for each lavatory-mounted soap dispenser. Also requires
one 830-341 Connector Kit for each soap dispenser.
PART NO.
SOAP PUMP, MOUNTING SHANK KITS
830-359
4" (100mm) Spout Length, Bright-Polished
Stainless Steel (B-822)
830-372
6" (150mm) Spout Length, Bright-Polished
Stainless Steel (B-8226)
Note: Maximum Countertop Mounting Thickness 1 3⁄4" (45mm). For thicker
countertops up to 4 3⁄4" (110mm) order Bobrick part number 822-402.
830-341 SureFlo CONNECTOR KITS FOR B-830
SERIES SOAP DISPENSERS
One kit required for each B-830 Series Soap Dispenser. Includes
vandal-resistant tubing and connectors for installation of B-830
SureFlo Soap Dispensing System.
16
ƒ USA & Canada QuickShip model.
12010_08 16
USA QuickShip model.
9/13/10 10:06 AM
Lavatory Mounted Soap Dispensers
NEW
B-826 SERIES LIQUID
SOAP DISPENSER
B-8263 SERIES FOAM
SOAP DISPENSER
AUTOMATIC SOAP DISPENSERS,
LIQUID AND FOAM
B-822 SERIES SOAP
DISPENSERS
For ease of maintenance and labor savings • Vandal-resistant locking
cover and free-turning spout • Corrosion-resistant • Bright-polished
spout, cover and escutcheon • High-impact-resistant ABS body and
shank • Shatter-resistant polyethylene container • Patented
Automatic touch-free sensor eliminates cross contamination. Meets
Barrier-Free accessibility standards. Sensor detects user’s hand to
automatically dispense controlled amount (O.8ml) of soap; activation
range is 4" (100mm) from sensor lens. Reduces soap usage, waste.
Bright-polished chrome spout cover.
Dispenses 1000 handwashes per 800ml, 2000 handwashes per
1600ml OneShot® soap refills. Soap refills available from sanitary supply distributors. Red LED light blinks when soap refill is low. Yellow LED
light blinks when battery life is low (average battery life 90 soap refills or
2 years). Water-resistant battery compartment and motor housing.
Mounts through 1" (25mm) diameter hole in lavatory or countertop.
Maximum countertop mounting thickness 2" (50mm). Spacer for use
with lavatory rim 3⁄4" (19mm) or greater is included. Battery requirements:
4 Alkaline D Cells (not included).
B-826 AUTOMATIC, LAVATORY–MOUNTED LIQUID
SOAP DISPENSER
B-826.18 Starter Kit Includes B-826 Automatic Lavatory-Mounted
Liquid Soap Dispenser, an 800ml lotion soap refill, and 4 Alkaline
D Cell batteries.
B-8263 AUTOMATIC, LAVATORY–MOUNTED FOAM
SOAP DISPENSER
B-8263.18 Starter Kit Includes B-8263 Automatic Lavatory-Mounted
B-822
B-8221
Foam Soap Dispenser, an 800ml foam soap refill, and 4 Alkaline
D Cell batteries.
826-20 AC ADAPTER (6V) for one B-826 or B-8263 Automatic
Lavatory-Mounted Soap Dispenser.
Available on special order: All-metal soap dispenser for vandal-prone
installations. AC Adapter (6V) for up to four B-826 or B-8263 Automatic
Lavatory Mounted Soap Dispensers.
OneShot is a registered trademark of Rubbermaid Commercial Products.
LIQUID & LOTION SOAPS, AND SYNTHETIC
DETERGENT DISPENSERS:
MODEL
CAPACITY
SPOUT
MAX. MTG.
NUMBER
LENGTH
THICKNESS
ƒB-822
ƒB-8221
ƒB-8226
ƒB-82216
34-fl oz (1.0-L)
20-fl oz (0.6-L)
34-fl oz (1.0-L)
20-fl oz (0.6-L)
4" (100mm)
4" (100mm)
6" (150mm)
6" (150mm)
4" (100mm)
1" (25mm)
4" (100mm)
1" (25mm)
B-822 SERIES DESIGNER’S NOTES:
1. Mount through 1" (25mm) diameter hole in lavatory or countertop.
2. Diameter of escutcheon: 2 1⁄16" (50mm).
3. Maximum height from base of body to bottom of container: 14 5⁄8"
(370mm) for B-822, B-8226; 8 1⁄4" (210mm) for B-8221, B-82216.
Allow clearance below basin for 3 1⁄2" (90mm) diameter container.
4. Mount with end of spout extending over inner edge of bowl.
IMPORTANT NOTE:
B-826 AND B-8263 SERIES DESIGNER’S NOTES:
All Bobrick B-822 Series Soap Dispensers are designed to dispense
commercially marketed all-purpose hand soaps including liquid and lotion
soaps, synthetic detergents, and antibacterial soaps containing PCMX
and/or Triclosan. Bobrick soap dispensers are not designed to dispense
alcohol-based hand sanitizers or iodine-based surgical soaps.
1. Maximum height from base of dispenser to bottom of refill 14 1⁄4"
(360mm) for 800ml refill; 16 1⁄4" (415mm) for 1600ml refill.
2. Allow 5" (125mm) diameter clearance below lavatory or countertop for
motor housing and 800ml refill. For 1600ml refill allow 5 1⁄2" (140mm)
diameter clearance.
3. Battery compartment equipped with 36" (915mm) cord, mounts on wall
under lavatory or countertop.
17
12010_08 17
9/13/10 10:06 AM
Soap Dispensers
B-4063 ConturaSeries RECESSED
SOAP DISPENSER
ConturaSeries SURFACE
MOUNTED SOAP DISPENSER
Dispenses all-purpose soaps. Drawn, 20-gauge (1.0mm), one-piece
front, satin-finish stainless steel with vessel attached to back.
Capacity: 50-fl oz (1.5-L). Pulls out for filling. Concealed locking device.
Wall to push-button, 1 5⁄8" (40mm). Rough Wall Opening: 5 7⁄8" W,
5 1⁄2" H, 4" min. depth (150 x 140 x 100mm). Universal/Barrier-Free
Mtg. Ht.: 49" (1245mm) to top of unit with push-button 44" (1120mm)
above floor.
Corrosion-resistant valve dispenses commercially marketed all-purpose
hand soaps. Container is satin-finish stainless steel. Capacity: 40-fl oz
(1.2-L). Soap refill window. Concealed wall fastening. Hinged filler-top
requires special key to open. Vandal-resistant. Unit 7" W, 6 1⁄8" H
(180 x 155mm); wall to push-button, 3 5⁄16" (85mm). Universal/BarrierFree Mtg. Ht.: 49" (1245mm) to top of unit with push-button
44" (1120mm) above floor.
ƒB-2111
ClassicSeries SURFACE
MOUNTED SOAP DISPENSER
Vertical tank is satin-finish stainless steel. Valve dispenses all-purpose
hand soaps. Capacity: 40-fl oz (1.2-L). Soap refill window. Concealed
wall fastening. Hinged filler-top requires special key to open. Vandalresistant. Unit 4 3⁄4" W, 8 1⁄8" H (120 x 205mm); wall to push-button,
3 1⁄2" (90mm). Universal/Barrier-Free Mtg. Ht.: 50 7⁄ 8" (1290mm) to
top of unit with push-button 44" (1120mm) above floor.
4112-79 RETROFIT ALL-PURPOSE VALVE
Available for Models B-4063, B-4112, B-2111, B-2112 and B-2014.
Field-replaceable corrosion-resistant valve dispenses most commercially
marketed all-purpose hand soaps. Valve operates with less than
5 lbs. of force (22.2 N).
ƒB-4112
ƒB-2112
ClassicSeries SURFACE
MOUNTED SOAP DISPENSER
Horizontal tank is satin-finish stainless steel. Valve dispenses all-purpose
hand soaps. Capacity: 40-fl oz (1.2-L). Soap refill window. Concealed
wall fastening. Hinged filler-top requires special key to open. Vandalresistant. Unit 8 1⁄8" W, 4 3⁄4" H (205 x 120mm); wall to push-button,
3 1⁄2" (90mm). Universal/Barrier-Free Mtg. Ht.: 47 1⁄2" (1205mm) to
top of unit with push-button 44" (1120mm) above floor.
ƒB-306
TrimLineSeries RECESSED
SOAP DISPENSER
Satin-finish stainless steel. Door: 90° return, conceals flange. Vessel on
back of door swings open for filling. Hinge and tumbler lock secure door
to cabinet. Capacity: 45-fl oz (1.3-L). Valve dispenses all-purpose soaps.
Soap refill window. Rough Wall Opening: 8 3⁄8" W, 4 3⁄8" H, 3 7⁄8" min.
depth (215 x 110 x 100mm). Universal/Barrier-Free Mtg. Ht.: 47 3⁄4"
(1215mm) to top; push-button 44" (1120mm) above floor.
2111-79 SureFlo RETROFIT VALVE
For Models B-11, B-12, B-111, B-112, B-201, B-2014, B-2111, B-202,
B-2024, B-306, B-3067; B-310, B-320 and B-330 Series Combination
Units. Valve operates with less than 5 lbs. of force (22.2 N).
18
ƒ USA & Canada QuickShip model.
12010_08 18
USA QuickShip model.
9/13/10 10:06 AM
Soap Dispensers
ƒB-40
ClassicSeries SURFACE-MOUNTED
ƒB-42
ClassicSeries SURFACE-MOUNTED
SOAP DISPENSER
SOAP DISPENSER
Two-tone black and grey. Valve dispenses all-purpose soaps. Vandalresistant lid has keyless locking device, pivots up for easy top filling.
Translucent container provides visible soap level. Capacity: 40-fl oz
(1.2-L). Concealed wall/mirror mounting, removable for cleaning. Unit
5 13⁄16" W, 6 7⁄8" H (150 x 175mm); wall to push-button, 3 3⁄16"
(80mm). Universal/Barrier-Free Mtg. Ht.: 50" (1270mm) to top
of unit with push-button 44" (1120mm) above floor. Patented.
All-black. Valve dispenses all-purpose soaps. Vandal-resistant lid has
keyless locking device, pivots up for easy top filling. Translucent container
provides visible soap level. Capacity: 40-fl oz (1.2-L). Concealed wall/mirror
mounting, removable for cleaning. Unit 5 13⁄16" W, 6 7⁄8" H (150 x 175mm);
wall to push-button, 3 3⁄16" (80mm). Universal/Barrier-Free Mtg. Ht.: 50"
(1270mm) to top of unit with push-button 44" (1120mm) above floor.
Patented.
ƒB-155
ClassicSeries LiquidMate Š
B-156 ClassicSeries LiquidMate
WALL-MOUNTED SOAP DISPENSERS
WALL-MOUNTED SOAP DISPENSERS
Corrosion-resistant valve dispenses thin, free-flowing commercially
marketed all-purpose hand soaps. Translucent polyethylene container
provides visible soap level. 24-fl oz (0.7-L) capacity. Unit 4" W, 7 5⁄8" H
(100 x 195mm). Universal/Barrier-Free Mtg. Ht.: 50 1⁄2" (1285mm)
to top of unit with push-button 44" (1120mm) above floor. Brightpolished, chrome-plated ABS mounting bracket.
Corrosion-resistant valve dispenses thin, free-flowing commercially
marketed all-purpose hand soaps. Translucent polyethylene container
provides visible soap level. 24-fl oz (0.7-L) capacity. Unit 4" W, 7 5⁄8" H
(100 x 195mm). Universal/Barrier-Free Mtg. Ht.: 50 1⁄2" (1285mm) to
top of unit with push-button 44" (1120mm) above floor. Beige ABS
mounting bracket.
ƒB-5050
MatrixSeries SURFACE-MOUNTED
SOAP DISPENSER
Impact-resistant polymer; grey color. Valve dispenses all-purpose hand
soaps, removable for easy maintenance. Lid has concealed locking
device. Concealed wall/mirror mounting. Large-capacity container:
50-fl oz (1.5-L). Unit 6" W, 8 1⁄8" H (150 x 205mm); wall to push-button,
4" (100mm). Universal/Barrier-Free Mtg. Ht.: 51" (1295mm) to top of
unit with push-button 44" (1120mm) above floor. Patented.
DESIGNER’S NOTES:
All surface-mounted soap dispensers require 4" (100mm) minimum
clearance above unit for filling.
IMPORTANT NOTE:
All Bobrick liquid soap dispensers are designed to dispense commercially
marketed all-purpose hand soaps including liquid and lotion soaps,
synthetic detergents, and antibacterial soaps containing PCMX and/or
Triclosan. Bobrick soap dispensers are not designed to dispense alcoholbased hand sanitizers or iodine-based surgical soaps.
19
12010_08 19
9/13/10 10:06 AM
Mirrors
B-290 SERIES WELDED-FRAME MIRRORS
B-165 SERIES CHANNEL-FRAME MIRRORS
• One-piece, roll-formed 3⁄4" x 3⁄4" (19 x 19mm) angle-frame • Type
304 stainless steel angle with satin finish • Corners heliarc welded,
ground and polished smooth • Beveled frame edge at mirror for
improved appearance • No. 1 quality, 1⁄4" (6mm) glass mirror; warranted
against silver spoilage for 15 years • Galvanized steel back • Secured
to concealed wall hanger with theft-resistant mounting
• One-piece, 1⁄2" x 1⁄2" x 3⁄8" (13 x 13 x 9.5mm) channel-frame • Type
430 stainless steel with bright-polished finish • Mitered corners • Frame
screw permits easy replacement of glass • No. 1 quality, 1⁄4" (6mm) glass
mirror; warranted against silver spoilage for 15 years • Galvanized steel
back • Secured to concealed wall hanger with theft-resistant mounting
MODEL NO.
MODEL NO.
W
H
MODEL NO.
ƒB-290 1830 " " [FP B-290 2448
B-290 1836 " " [FP B-290 2460
B-290 2430 " " [FP B-290 2472
ƒB-290 2436 " "[FP
W
H
" " [FP
" " [FP
" " [FP
SPECIAL-ORDER CUSTOM SIZE B-290 SERIES MIRRORS
Maximum size of one piece mirror: 144" x 72" (366 x 183cm).
Maximum frame size available: 180" x 72" (457 x 183cm) with two
pieces of glass. To specify special sizes, use Series Number followed by
width and height.
MIRROR/SHELF COMBINATION
• Same mirror as B-290 Series • Type 304 satin-finish stainless steel
shelf • Shelf projects 5" (127mm), with 3⁄4" (19mm) return on front and
sides; front return edge hemmed for rigidity and safety • Shelf corners
heliarc welded, ground and polished smooth
W
H
B-292 1830 [FP
B-292 1836 [FP
MODEL NO.
W
B-292 2436
[FP
H
SPECIAL-ORDER CUSTOM SIZE B-292 SERIES MIRRORS
Maximum frame size available: 96" x 72" (244 x 183cm) with one piece
of glass. Maximum size of shelf: 96" (244cm) furnished as one piece. To
specify special sizes, use Series Number followed by width and height.
20
ƒ USA & Canada QuickShip model.
12010_08 20
1824
1830
1836
2430
2436
W
H
"
"
"
"
"
"
"
"
"
"
MODEL NO.
B-165 2448
[FP
[FP
B-165 2460
[FP B-165 4836
[FP [FP W
H
" " [FP
" " [FP
" " [FP
SPECIAL-ORDER CUSTOM SIZE B-165 SERIES MIRRORS
Maximum size mirror: 72" x 60" (183 x 152cm). To specify special
sizes, use Series Number followed by width and height.
B-166 SERIES CHANNEL-FRAME
MIRROR/SHELF COMBINATION
B-292 SERIES WELDED-FRAME
MODEL NO.
B-165
Ï B-165
ƒ B-165
B-165
Ï B-165
• Same mirror as B-165 Series • Type 304 satin-finish stainless steel
shelf • Shelf projects 5" (127mm) with 3⁄8" (10mm) return on front and
sides; front return edge hemmed for rigidity and safety
MODEL NO.
W
H
MODEL NO.
B-166 1824 " " [FP B-166 1836
B-166 2436
B-166 1830 " " [FP
W
H
" " [FP
" " [FP
SPECIAL-ORDER CUSTOM SIZE B-166 SERIES MIRRORS
Maximum size mirror: 24" x 60" (61 x 152cm). Maximum shelf length:
24" (61cm). To specify special sizes, use Series Number followed by
width and height.
USA QuickShip model.
9/13/10 10:06 AM
Mirrors
STANDARD SIZE
TEMPERED GLASS MIRRORS
B-293
B-294
B-293 SERIES FIXED-POSITION TILT MIRRORS
B-2908 SERIES
B-1658 SERIES
Tempered glass mirrors are engineered for heavy-traffic, vandal-prone
restrooms in K–12 school buildings, stadiums, outdoor recreation centers
and low-supervision facilities such as parks and highway rest stops.
Tempered glass mirrors resist breakage and provide a measure of safety
from broken glass, but differ in color and reflective quality from standard
glass mirrors. Bobrick uses the highest quality tempered glass mirrors.
Modest distortion or heat-generated markings are normal in the tempered
glass mirror manufacturing process. Therefore, Bobrick will not accept
returns of tempered glass mirrors with random distortion or markings.
B-2908 SERIES STANDARD SIZE
TEMPERED GLASS WELDED-FRAME
MIRRORS
B-1658 SERIES STANDARD SIZE
TEMPERED GLASS CHANNEL-FRAME
MIRRORS
MODEL NO.
MODEL NO.
• Same frame as B-165 Series
• Same frame as B-290 Series
• 1⁄4" (6mm) tempered glass mirror • 1⁄4" (6mm) tempered glass mirror
W
H
B-2908 1830 " " [FP
B-2908 1836 " " [FP
B-2908 2436 " " [FP
W
H
B-1658 1830 " " [FP
B-1658 2436 24" 36" [FP
Provide visibility for wheelchair patients. Frame is type 304 stainless steel,
satin finish. Beveled edges of frame hug mirror; provides gapless fit for
improved appearance, and safety when cleaning mirror. No. 1 quality, 1⁄4"
(6mm) glass mirror; warranted against silver spoilage for 15 years. Mirror
extends 4" (100mm) from wall at top and tapers to 1" (25mm) at bottom.
MODEL NO.
W
H
MODEL NO.
ƒ B-293 1630 " " [FP
Ï B-293 1830 " " [FP
W
H
B-293 1836 " " [FP
" " [FP
Ï B-293 2436
SPECIAL-ORDER CUSTOM SIZE B-293 SERIES MIRRORS
Maximum size mirror: 36" x 48" (91 x 122cm).
B-294 SERIES ANGLE-FRAME TWO POSITION
TILT MIRROR
Tilt forward to provide full visibility for wheelchair patients or return to
upright position. Frame is 3⁄4" x 3⁄4" (19 x 19mm), type 304 stainless steel
angle, satin finish. Beveled edges of frame hug mirror; provides gapless fit
for improved appearance, and safety when cleaning mirror. No. 1 quality,
1
⁄4" (6mm) glass mirror; warranted against silver spoilage for 15 years. Top
of mirror tilts 7" (180mm) from wall with self-locking mechanisms; bottom
of mirror mounts to wall with full-length stainless steel hinge.
MODEL NO.
W
H
B-294 1630 " " [FP
SPECIAL-ORDER CUSTOM SIZE B-294 SERIES MIRRORS
Maximum size mirror: 24" x 36" (61 x 91cm).
SPECIAL-ORDER REFLECTIVE SURFACES
Polished Stainless Steel, Tempered and Laminated Glass Mirrors
resist breakage and provide a measure of safety from broken glass,
but differ in color and reflective quality from standard glass mirrors.
Modest distortion is normal and not a returnable condition. Available
on special order.
POLISHED STAINLESS STEEL
B-1656 Series Mirrors (up to 60" x 36"; 152 x 92cm)
B-2906 Series Mirrors (up to 60" x 24"; 152 x 61cm)
TEMPERED GLASS
B-1658 Series Mirrors (up to 72" x 48"; 183 x 122cm)
B-2908 Series Mirrors (up to 120" x 48"; 305 x 122cm)
LAMINATED GLASS
B-1659 Series Mirrors (up to 72" x 48"; 183 x 122cm)
B-2909 Series Mirrors (up to 84" x 48"; 214 x 122cm)
B-1556 SERIES FRAMELESS MIRRORS
Bright-polished stainless steel. Mirror has 1⁄4" (6mm) return concealing 1⁄4"
(6mm) tempered masonite backing. Furnished with four mounting screws.
MODEL NO.
W
H
MODEL NO.
W
H
B-1556 1824 ȫ ȫ [FP B-1556 2436 ȫ ȫ [FP
B-1556 1830ȫ ȫ [FP
DESIGNER’S NOTES:
To specify mirrors, use Series Number desired followed by width and
height in inches. Width dimension must always be stated first following
Series Number. Framed mirrors are manufactured to overall dimensions,
as shown in all mirror tables on pages 20 and 21. Overall height of
mirror/shelf models includes shelf. Framed mirrors must be installed
with width and height dimensions as ordered. Mirror back and wall
hanger cannot be installed side ways to reverse width and height
dimensions. Provide minimum 3⁄4" (19mm) clearance at top of mirror
for mounting on wall hanger and 1" (25mm) clearance on each side.
B-942 FRAMELESS MIRROR (FRONT SECURED)
Mirror is 11 1⁄4" x 17 1⁄4" (285 x 440mm) overall, 1⁄4" (6mm) deep.
18-gauge (1.2mm), type 430 stainless steel with bright-polished finish.
21
12010_08 21
9/13/10 10:06 AM
Warm Air Hand Dryers
ƒB-740
Eclipse Š SURFACE-MOUNTED
HAND DRYER
Durable, drawn-steel white vitreous enamel cover,
automatic sensor, ƒ115V AC, 20 Amp, 2300
Watts, 50/60 Hz, cULus Listed, or 208-240V
AC, 9–10 Amp, 1900–2400 Watts, 50/60 Hz,
cULus Listed, VDE approved, CE marked and
CCC approved. Patented.
NEW
B-7128 TrimLineSeries ADA
SURFACE-MOUNTED HAND DRYER
B-748 Eclipse SURFACE-MOUNTED
Durable, 18-gauge, type 304 satin-finish stainless
steel cover with black plastic trim, automatic sensor,
dual air outlets, ƒ115V AC, 15 Amp, 1725 Watts,
50/60 Hz, Single Phase, cULus Listed, or 208-240V
AC, 6.8-7.8 Amp, 1400-1900 Watts, 50/60 Hz,
Single Phase, cULus Listed, VDE approved, and CE
marked. Patent pending.
13 25/32"
350mm
13 19/32"
345mm
HAND DRYER
Durable, drawn-steel bright-polished chrome-plated
cover, automatic sensor, 115V AC, 20 Amp, 2300
Watts, 50/60 Hz, cULus Listed, or 208–240V AC,
9–10 Amp, 1900–2400 Watts, 50/60 Hz, cULus
Listed, VDE approved, CE marked and CCC
approved. Patented.
4"
100mm
NEW
B-7120 TrimLineSeries ADA
SURFACE-MOUNTED HAND DRYER
Durable, 22-gauge, zinc-plated steel with white
epoxy cover with black plastic trim, automatic
sensor, dual air outlets, ƒ115V AC, 15 Amp,
1725 Watts, 50/60 Hz, Single Phase, cULus
Listed, or 208-240V AC, 6.8-7.8 Amp, 1400-1900
Watts, 50/60 Hz, Single Phase, cULus Listed,
VDE approved, and CE marked. Patent pending.
22
ƒB-750
13 25/32"
350mm
13 19/32"
345mm
4"
100mm
AirCraft Š ADA RECESSED HAND DRYER
Durable, cast-iron with white vitreous enamel
finish, automatic sensor, ƒ115V AC, 20
Amp, 2300 Watts, 50/60 Hz, cULus Listed,
or 208–240V AC, 9–10 Amp, 1900–2400
Watts, 50/60 Hz, cULus Listed, VDE
approved, CE marked and CCC approved.
4"
13 1/2 "
100mm
345mm
9 1/4 "
235mm
11 7/8 "
300mm
3 9/16 "
90mm
15 1/4 "
385mm
ƒ USA & Canada QuickShip model.
12010_08 22
9/13/10 10:06 AM
Warm Air Hand Dryers
• 8 STYLING, PERFORMANCE AND PRICING CHOICES.
• 6 DISTINCTIVE DESIGNS, 6 MATERIALS/FINISHES.
• 5 ELECTRONIC PLATFORMS.
• 5 VANDAL-RESISTANCE LEVELS.
ƒB-708
Œ
AirGuard SURFACEMOUNTED HAND DRYER
Durable, cast-iron with white vitreous
enamel cover, automatic sensor, ƒ115V
AC, 20 Amp, 2300 Watts, 50/60 Hz,
cULus Listed.
• ENVIRONMENTALLY RESPONSIBLE; ELIMINATES
PAPER TOWELS AND PAPER TOWEL DISPOSAL.
• SAVES 95% OF THE COST OF HAND DRYING.
• MINIMIZES THE INCIDENCE OF PAPER TOWELS
BEING USED TO STOP UP TOILETS AND URINALS,
AND THE COST OF REPAIR AND CLEAN-UP.
DESIGNER’S NOTES:
1. When ordering, specify voltage by adding 115V or 230V following model
number, example: B-750 115V.
2. B-710 CompacDryer is not designed for vandal-prone installations. For
vandal-prone installations, use Bobrick AirCraft and B-708 AirGuard
dryers with cast-iron vitreous enamel finished covers, B-740 Eclipse dryer
with drawn steel, vitreous enamel finished cover, or B-7128 TrimLine
Dryer with satin-finish stainless steel cover.
ƒB-700
AirCraft SURFACEMOUNTED HAND DRYER
Cast-iron with white vitreous enamel finish,
automatic (B-731, touch-button operation,
80-sec. drying cycle), ƒ115V AC, 20 Amp,
2300 Watts, 50/60 Hz, cULus Listed, or
208–240V AC, 9–10 Amp, 1900–2400
Watts, 50/60 Hz, cULus Listed, VDE
approved, CE marked and CCC approved.
ƒB-710
CompacDryerΠSURFACE
MOUNTED HAND DRYER
One-piece grey-molded plastic cover, automatic
sensor, ƒ115V AC, 15 Amp, 1725 Watts,
60 Hz, cULus Listed. Patented.
3. Bobrick automatic hand dryers should be installed 15" (380mm)
above any projection or horizontal surface which may interfere with the
operation of the automatic sensor.
4. Bobrick dryers comply with EU Directive “Restriction of Hazardous
Substances” (RoHS) requirements for non-use of certain hazardous
substances in the production of electronic products.
WARRANTIES:
For product warranties and limitations information, see page 40.
23
12010_08 23
9/13/10 10:06 AM
Toilet Tissue Dispensers
B-667
B-697
B-699
600 SERIES RECESSED TOILET TISSUE DISPENSERS
B-4388 Contura Series RECESSED
MULTI-ROLL TOILET TISSUE DISPENSER
Satin-finish stainless steel unit and dispensing mechanism. Flush tumbler
lock. Holds two rolls up to 5 1⁄4" (133mm) diameter (1800 sheets). Extra
roll drops in place when bottom roll is depleted. Theft-resistant, heavy-duty
spindles. Extends 2 3⁄4" (70mm) from wall. Rough Wall Opening: 6 1⁄4" W,
11 1⁄4" H, 3 1⁄4" min. depth (160 x 285 x 85mm). Av. Mtg. Ht.: 28 3⁄4–
36 3⁄4" (730–935mm) to top of unit; Barrier-Free, 28 3⁄4" (730mm).
Type 304 stainless steel with one-piece seamless construction. • Choice
of finish: bright-polished or satin. • Chrome-plated plastic spindles hold
rolls up to 5 1⁄8" (130mm) diameter (1500 sheets). • Choice of capacity:
single-roll models measure 6 1⁄8" W x 6 1⁄8" H (155 x 155mm); double-roll
models measure 12 5⁄16" W x 6 1⁄8" H (315 x 155mm).• Mounting:
clamps for securing to stud walls or countertop aprons.• Rough Wall
Openings: single-roll models require 5 1⁄2" W x 5 1⁄4" H x 3 3⁄8" min.
depth (140 x 135 x 85mm), double-roll models require 11 œ" W x
5 1⁄4" H x 3 3⁄8" min. depth (300 x 135 x 85mm).
*MODEL
NO.
CAPACITY
1 ROLL 2 ROLLS
FINISH
BRIGHT SATIN
STAINLESS
STEEL
HOODS
B-667
B-6677
B-669
B-3888 ClassicSeries RECESSED
B-6697
MULTI-ROLL TOILET TISSUE DISPENSER
Satin-finish stainless steel unit and dispensing mechanism. Door has
flat face with protruding tumbler lock. Holds two rolls up to 5 1⁄4"
(133mm) diameter (1800 sheets). Extra roll drops in place when
bottom roll is depleted. Theft-resistant, heavy-duty spindles. Extends
2 3⁄4" (70mm) from wall. Rough Wall Opening: 6 1⁄4" W, 11 1⁄4" H,
3 1⁄4" min. depth (160 x 285 x 85mm). Av. Mtg. Ht.: 28 3⁄4–36 3⁄4"
(730–935mm) to top of unit; Barrier-Free, 28 3⁄4" (730mm).
B-697
B-6977
B-699
B-6997
*Theft-Resistant Spindle (Part No. 283-604), option for all models, pg. 26.
B-663 RECESSED TOILET TISSUE DISPENSER
WITH STORAGE SPACE FOR EXTRA ROLL
Bright-polished stainless steel. Chrome-plated plastic spindle holds rolls
up to 5 1⁄8" (130mm) diameter (1500 sheets). Recessed cabinet 3 15⁄16"
(100mm) deep holds spare roll. Unit 6 1⁄4" W, 6 1⁄4" H (160 x 160mm).
Rough Wall Opening: 5 1⁄2" W, 5 1⁄2" H, 4" min. depth (140 x 140 x
100mm). Universal/Barrier-Free Mtg. Ht.: 22 1⁄8" (560mm) to top of unit.
B-6637 Similar to B-663, but with satin finish.
Theft-resistant Spindle (Part No. 283-604) available as an option for
above models, see page 26.
ƒB-4288
Contura Series SURFACE-MOUNTED
MULTI-ROLL TOILET TISSUE DISPENSER
Satin-finish stainless steel unit with stainless steel dispensing
mechanism. Flush tumbler lock. Holds two rolls up to 5 1⁄4" (135mm)
diameter (1800 sheets). Extra roll automatically drops in place when
bottom roll is depleted. Theft-resistant, heavy-duty spindles. Unit
6 1⁄16" W, 11" H, 5 15⁄16" D (155 x 280 x 150mm). Av. Mtg. Ht.:
28–36" (710–915mm) to top of unit; Barrier-Free, 28" (710mm).
1/2 " – 2"
12–50mm
B-386 PARTITION-MOUNTED MULTI–ROLL TOILET
TISSUE DISPENSER (SERVES 2 COMPARTMENTS)
Satin-finish stainless steel. Mounts centered through toilet partitions,
1
⁄2–2" (12–50mm) thick; used from both sides. Holds four standard
core toilet tissue rolls up to 5 1⁄8" (130mm) diameter; two for each
side. Chrome-plated plastic spindles with heavy-duty internal springs.
Rough Partition Opening: 11 1⁄2" W, 10 7⁄8" H (290 x 275mm). Av.
Mtg. Ht.: 36" (915mm) to top of unit; Barrier-Free Mtg. Ht.: 27 1⁄2"
(700mm). Theft-Resistant Spindle (Part No. 283-604) available
as an option for above model, see page 26.
24
ƒ USA & Canada QuickShip model.
12010_08 24
ƒB-2888
ClassicSeries SURFACE-MOUNTED
MULTI-ROLL TOILET TISSUE DISPENSER
Satin-finish stainless steel unit with stainless steel dispensing
mechanism. Door has flat face with protruding tumbler lock. Holds
two rolls up to 5 1⁄4" (135mm) diameter (1800 sheets). Extra roll
automatically drops in place when bottom roll is depleted. Theftresistant, heavy-duty spindles. Unit 6 1⁄16" W, 11" H, 5 15⁄16" D
(155 x 280 x 150mm). Av. Mtg. Ht.: 28–36" (710–915mm) to
top of unit; Barrier-Free, 28" (710mm).
USA QuickShip model.
9/13/10 10:06 AM
Toilet Tissue Dispensers
ƒB-2892
ClassicSeries SURFACE-MOUNTED
TWIN JUMBO-ROLL TOILET TISSUE DISPENSER
B-52891 MatrixSeries SURFACE-MOUNTED
Satin-finish stainless steel. Equipped with tumbler lock. Spindles hold
two 10" (255mm) diameter rolls with 2 1⁄4" (55mm) diameter core
rolls; convertible for 3" (75mm) diameter core rolls. Sliding access
panel exposes one roll at a time, allows easy roll change-over. Wide
viewing slot in door. Quick reloading. Unit 20 13⁄16" W, 11 3⁄8" H,
5 5⁄16" D (530 x 290 x 135mm). Universal/Barrier-Free Mtg. Ht.: 30"
(760mm) to top of unit.
Durable ABS plastic; grey color. Spindle holds one 10" (255mm)
diameter roll with 3" (75mm) diameter core; convertible in field to
hold 2 1⁄4" (55mm) diameter core roll. Concealed locking device. Viewing
slot in door. Unit 10 3⁄4" W, 12 9⁄16" H, 5 1⁄4" D (275 x 320 x 135mm).
Universal/Barrier-Free Mtg. Ht.: 31" (785mm) to top of unit. Patented.
B-2890 SINGLE JUMBO-ROLL SURFACE
MOUNTED TOILET TISSUE DISPENSER
Satin-finish stainless steel. Equipped with spring lock. Spindle holds
one 10" (255mm) diameter roll with 3" (75mm) diameter core.
Convertible for 2 11⁄16" (70mm) and 1 5⁄8" (40mm) diameter core rolls.
Powder-coated mounting plate. Slot reveals tissue supply. Unit 10 5⁄8" W,
10 5⁄8" H, 4 1⁄2" D (270 x 270 x 115mm). Universal/Barrier-Free
Mtg. Ht.: 29 1⁄2" (750mm) to top of unit.
B-2740
B-2730
ƒB-2740
ClassicSeries SURFACE-MOUNTED
TOILET TISSUE DISPENSER FOR TWO ROLLS
Cast aluminum, satin finish. Plastic spindles, concealed locking device;
theft-resistant. Holds two rolls up to 6" (150mm) diameter (2000 sheets).
Unit 12 1⁄2" (320mm) wide, proj. 4 7⁄8" (125mm) from wall. No controlled
delivery. Universal/Barrier-Free Mtg. Ht.: 19 3⁄4" (500mm) to top of unit.
ƒB-274 Similar to B-2740, with controlled delivery.
ƒB-2730
SINGLE ROLL TOILET TISSUE DISPENSER
Unit 6 1⁄2" (165mm) wide. No controlled delivery.
B-273 Similar to B-2730, with controlled delivery.
NEW
JUMBO-ROLL TOILET TISSUE DISPENSER
ƒB-5288
MatrixSeries SURFACE-MOUNTED
MULTI-ROLL TOILET TISSUE DISPENSER
Durable ABS plastic; grey color. Two-roll dispensing mechanism for
rolls up to 5 3⁄4" (145mm) diameter (2000 sheets). Extra roll easily
shifts into place when bottom roll is depleted. Concealed locking
device. Unit 6 1⁄4" W, 13 1⁄2" H, 6 7⁄8" D (160 x 345 x 175mm).
Av. Mtg. Ht.: 28–36" (710–915mm) to top of unit; Barrier-Free,
28" (710mm). Patented.
B-6699 SURFACE-MOUNTED
TOILET TISSUE DISPENSER
WITH HOOD FOR SINGLE ROLL
Bright-polished stainless steel. Hood protects paper. Chrome-plated
plastic spindle holds rolls up to 5 1⁄8" (130mm) diameter (1500 sheets).
Unit 6 3⁄16" W, 6 3⁄16" H (155 x 155mm); hood projects 4 3⁄4" (120mm)
from wall with full roll in place. Universal/Barrier-Free Mtg. Ht.: 22"
(560mm) to top of unit. B-66997 Similar to B-6699, but with satin finish.
B-6999 TOILET TISSUE DISPENSER WITH HOODS FOR TWO ROLLS
Bright-polished finish. Unit 12 3⁄8" W, 6 3⁄16" H (315 x 155mm); hoods
project 4 3⁄4" (120mm) from wall with full roll in place.
B-69997 Similar to B-6999, but with satin finish.
NEW
HOLDER
B-543 Cubicle Collection SURFACE-MOUNTED
SINGLE ROLL TOILET TISSUE DISPENSER
Satin-finish stainless steel. Threaded flange conceals mounting plate,
provides snug fit to the wall. Vertical post accommodates one roll
up to 5" (125mm) diameter and a core size from 3⁄4" (20mm)
to 1 1⁄2" (40mm). Flange width 2" (50mm). Overall height 8" (205mm).
Unit projects 3 1⁄2" (90mm) from wall.
See page 29 for the complete Cubicle Collection.
Satin-finish stainless steel. Threaded flange conceals mounting plate,
provides snug fit to the wall. Accepts standard-core size from 3⁄4"
(20mm) up to 1 1⁄2" (40mm) and 4" (100mm) wide. Set screw in post
prevents vandalism. Flange width 2" (50mm). Overall width 5 1⁄2"
(140mm). Height 4 1⁄2" (115mm). Unit projects 1 5⁄8" (35mm) from wall.
See page 29 for the complete Cubicle Collection.
B-541 Cubicle Collection SPARE TOILET ROLL
25
12010_08 25
9/13/10 10:06 AM
Toilet Tissue Dispensers
B-686
B-685
B-685 SURFACE-MOUNTED TOILET TISSUE
DISPENSER FOR SINGLE ROLL
Bright-polished stainless steel. Support-arm flanges lock to concealed
stainless steel wall plate. Chrome-plated plastic spindle holds rolls up
to 5 1⁄2" (140mm) diameter (1800 sheets). Unit 7 1⁄4" W, 2" H (185 x
50mm); projects 3 15⁄16" (100mm) from wall. Universal/Barrier-Free Mtg.
Ht.: 20" (510mm) to top of unit.
B-6857 Similar to B-685, but with satin finish.
B-264 ClassicSeries SURFACE-MOUNTED
VANDAL-RESISTANT TOILET TISSUE DISPENSER
FOR SINGLE ROLL
Bright-polished chrome-plated steel. Self-locking mechanism. Controlled
delivery. Accommodates one standard-core toilet tissue roll up to 4 1⁄2"
(115mm) diameter. Roll cannot be removed from dispenser until empty.
Unit 6" W, 2 3⁄4" H (150 x 70mm); projects 4 1⁄4" (110mm) from wall.
B-7685 ClassicSeries SURFACE-MOUNTED
TOILET TISSUE DISPENSER FOR SINGLE ROLL
Bright-polished stainless steel. Unit 7 1⁄4" W, 2" H (185 x 50mm);
projects 3 15⁄16" (100mm) from wall.
B-76857 Similar to B-7685, but with satin finish.
B-686 SURFACE-MOUNTED TOILET TISSUE
DISPENSER FOR TWO ROLLS
Bright-polished stainless steel. Support-arm flanges lock to concealed
stainless steel wall plate. Chrome-plated plastic spindle holds rolls up
to 5 1⁄2" (140mm) diameter (1800 sheets).Unit 12 1⁄2" W, 2" H (320
x 50mm); projects 3 15⁄16" (100mm) from wall.
B-6867 Similar to B-686, but with satin finish.
B-7686 ClassicSeries SURFACE-MOUNTED
TOILET TISSUE DISPENSER FOR TWO ROLLS
Bright-polished stainless steel. Unit 12 1⁄2" W, 2" H (320 x 50mm);
projects 3 15⁄16" (100mm) from wall.
B-76867 Similar to B-7686, but with satin finish.
Theft-Resistant Spindle (Part No. 283-604) available as an option
for above models, see below.
B-27460 SURFACE-MOUNTED TOILET TISSUE
ClassicSeries SURFACE-MOUNTED
VANDAL-RESISTANT TOILET TISSUE DISPENSER
FOR TWO ROLLS
Bright-polished chrome-plated steel. Self-locking mechanism. Controlled
delivery. Accommodates two standard-core toilet tissue rolls up to 4 1⁄2"
(115mm) diameter. Rolls cannot be removed from dispenser until empty.
Unit 12 1⁄4" W, 2 3⁄4" H (310 x 70mm), projects 4 1⁄4" (110mm) from wall.
ƒB-2840 SURFACE-MOUNTED TOILET TISSUE
DISPENSER FOR TWO ROLLS
DISPENSER WITH SHELF
Vandal-resistant unit: heavy-duty cast aluminum, satin finish. Tumbler
lock secures spindles in place. High-impact plastic spindles hold rolls
up to 6" (150mm) diameter (2000 sheets). Unit 14 1⁄8" (360mm) wide,
projects 5 1⁄4" (135mm) from wall. No controlled delivery. Universal/
Barrier-Free Mtg. Ht.: 20 1⁄8" (510mm) to top of unit. Patented.
Satin-finish stainless steel. Shelf has 1⁄2" (13mm) returns, hemmed front
edge. Chrome-plated plastic spindles hold rolls up to 5 1⁄2" (140mm)
diameter (1800 sheets). Unit 16" W, 4" H, 5" D (405 x 100 x 125mm).
Universal/ Barrier-Free Mtg. Ht.: 22" (560mm) to top of unit.
B-2746 Similar to B-27460, with controlled delivery. Patented.
Theft-Resistant Spindle (Part No. 283-604) available as an option for
above model, see below.
ƒ283-604 THEFT-RESISTANT SPINDLE
Molded plastic spindle with concealed locking feature is available as
an option or replacement part for Bobrick surface-mounted and recessed
toilet tissue dispensers. After rolls are depleted, spindle is removed with
special key furnished; theft-resistant.
26
ƒB-265
ƒ USA & Canada QuickShip model.
12010_08 26
B-272 SURFACE-MOUNTED TOILET TISSUE CABINET
Satin-finish stainless steel. Equipped with tumbler lock; vandal-resistant.
Dispenses either single- or double-fold toilet tissue. Large capacity: 1330
singlefold tissues. Slots in cabinet indicate refill time. May be refilled
with full standard pack before dispenser is empty. Unit 5" W, 8 15⁄16" H,
3" D (125 x 225 x 710mm).
USA QuickShip model.
9/13/10 10:06 AM
Toilet Compartment Accessories
DESIGNER’S NOTES:
1. Partition-mounted units B-3471, B-3571 with one side flush to partition
of Barrier-Free compartment have toilet tissue on left when facing unit.
2. Recessed units B-3474, B-3574 and surface-mounted units B-3479,
B-3579 have toilet tissue on right when facing unit.
3. Position unit on panel or side wall with centerline of toilet tissue
dispenser 7"–9" (180–230mm) in front of leading edge of toilet.
4. For B-3471 and B-3571 on left side of toilet (when seated on toilet)
rear edge of panel cut-out should be 32 ½" to 34 ½" (825 to 876mm)
from rear edge of panel to position toilet tissue dispensers centerline
7" to 9" (180 to 230mm) in front of leading edge of toilet. For units
on right side of toilet, rear edge of panel cut-out should be 25" to 27"
(635 to 685mm) from rear edge of panel. Cut-out locations based on
toilet projecting 30" (760mm) from rear wall, and a ½" (13mm) gap
between rear edge of panel and rear wall.
5. When combination units are mounted in an accessible toilet
compartment through the shared toilet partition panel, the unit’s
location in the adjoining toilet compartment must permit the unit’s
complete operation, and allow for the unit’s door to swing clear of
the toilet when custodians service the unit.
B-357
B-3471
B-357 ClassicSeries PARTITION-MOUNTED
SEAT-COVER DISPENSER, SANITARY NAPKIN
DISPOSAL AND TOILET TISSUE DISPENSER
B-3471 ClassicSeries PARTITION
MOUNTED SEAT-COVER DISPENSER AND
TOILET TISSUE DISPENSER
Mounts centered through toilet partition. Used from both sides,
serviced from one side. Capacity: 0.8-gal. (3.0-L). Holds 500 toilet
seat covers and two rolls of tissue for each compartment. Theftresistant spindles. Rough Partition Opening: 15 1⁄2" W, 28 7⁄8" H
(395 x 735mm). Av. Mtg. Ht.: 60" (1525mm) to top of unit.
One side mounts flush against partition of Barrier-Free compartment to
allow clearance for grab bar. Used from both sides, serviced from one side.
Holds 500 toilet seat covers and two rolls of tissue for each compartment.
Theft-resistant spindles. Rough Partition Opening: 15 1⁄2" W, 28 7⁄8" H (395
x 735mm). Universal/Barrier-Free Mtg. Ht.: 43 1⁄4" (1100mm) to top of unit.
B-3571 Similar to B-357, but one side mounts flush against
B-347 Similar to B-3471, but mounts centered through toilet partition.
partition of Barrier-Free compartment to allow clearance for grab bar.
Universal/Barrier-Free Mtg. Ht.: 43 1⁄4" (1100mm) to top of unit.
Used from both sides, serviced from one side. Average Mounting Height:
60" (1525mm) to top of unit.
B-3574 Similar to B-3571, but for recessed installation in side
B-3474 Similar to B-3471, but for recessed installation in side
wall of single compartment. Holds 500 toilet seat covers and
two rolls of tissue. Rough Wall Opening: 16" W, 29 1⁄4" H, 4" min.
depth (405 x 745 x 100mm). Av. Mtg. Ht.: 60" (1525mm) to top
of unit; Barrier-Free, 44 1⁄2" (1130mm).
wall of single compartment. Holds 500 toilet seat covers and two
rolls of tissue. Rough Wall Opening: 16" W, 29 1⁄4" H, 4" min. depth
(405 x 745 x 100mm). Av. Mtg. Ht.: 60" (1525mm) to top of unit;
Barrier-Free, 44 1⁄2" (1130mm).
B-3579 Similar to B-3574, but with stainless steel skirt for
B-3479 Similar to B-3474, but with stainless steel skirt for surface
surface mounting. Av. Mtg. Ht.: 60" (1525mm) to top of unit.
mounting. Av. Mtg. Ht.: 60" (1525mm) to top of unit.
• Partition-Mounted Models B-347, B-3471, B-357, B-3571 mount through
partitions 1⁄2" to 2" (13–51mm) thick, serving two compartments.
Dimensions typical for all
partition-mounted models with
toilet-seat-cover dispensers.
Cutouts in partitions for
accessories can be pre-cut
at factory if location and size
of cutouts are specified and
orders for both partitions and
accessories are received
together.
• Models B-3471, B-3474, B-3571, B-3574 meet accessibility guidelines.
• Toilet tissue dispensers hold 5 1⁄4" (135mm) diameter, 1800-sheet rolls.
• Flanges are one-piece seamless, doors secured with full-length stainless
steel hinges, and tumbler locks keyed like other Bobrick models.
• Constructed of type 304 stainless steel throughout with satin finish on
all exposed surfaces; welded construction.
• Theft-resistant spindles included.
• 353-12 Disposable Paper Liners, 1,000 per case available for models
B-357, B-3571, B-3574, B-3579.
27
12010_08 27
9/13/10 10:06 AM
Sanitary Napkin Disposals
B-353 ClassicSeries RECESSED
SANITARY NAPKIN DISPOSAL
Satin-finish stainless steel. Seamless beveled flange. Door has
tumbler lock. Self-closing panel covers disposal opening. Removable,
leak-proof, 1.2-gal. (4.6-L) plastic receptacle. Rough Wall Opening:
11 1⁄4" W, 15 5⁄8" H, 4" min. depth (285 x 395 x 100mm).
Universal/Barrier-Free Mtg. Ht.: 31" (785mm) to top of unit.
353-12 Disposable paper liners. 1,000 per case.
Cabinet
12 3/4 "
325mm
11"
9 1/16 "
1/2 "
275mm
9 1/8 "
10 13/16 "
230mm
11"
275mm
13mm
to
280mm
1 5/16 "
33mm
1 1/4 "
32mm
mtg.
thickness
10 7/8 "
280mm
230mm
3 15/16 "
Top view
12 3/4 "
100mm
325mm
B-4354 ConturaSeries PARTITION
MOUNTED SANITARY NAPKIN DISPOSAL
B-4353 ConturaSeries RECESSED
SANITARY NAPKIN DISPOSAL
Satin-finish stainless steel. Mounts in toilet partition 1⁄2–1 1⁄4" (13–32mm)
thick. Self-closing doors pull down with less than 5 lbs of force (22.2 N)
for access to disposal. Removable, leak-proof, 0.7-gal. (2.7-L) plastic
receptacle. Rough Partition Opening: 11" W, 9 3⁄8" H (280 x 240mm).
Universal/Barrier-Free Mtg. Ht.: 31" (785mm) to top of unit. Patented.
Satin-finish stainless steel. Self-closing door pulls down for access to
disposal. Furnished with removable, leak-proof, 1.2-gal. (4.6-L) plastic
receptacle. Rough Wall Opening: 11 1⁄4" W, 9 1⁄2" H, 4" min. depth
(285 x 240 x 100mm). Universal/Barrier-Free Mtg. Ht.: 31" (785mm)
to top of unit.
353-12 Disposable paper liners. 1,000 per case.
353-12 Disposable paper liners. 1,000 per case.
11 1/16 "
280mm
16 15/16 "
430mm
18 15/16 "
480mm
3 5/8 "
90mm
9/16 "
13 "
14mm
330mm
B-354 ClassicSeries PARTITION
B-35303 TrimLineSeries RECESSED
MOUNTED SANITARY NAPKIN DISPOSAL
SANITARY NAPKIN DISPOSAL
Satin-finish stainless steel. Mounts in partitions 1⁄2–1 1⁄4" (13–32mm)
thick. Self-closing panels cover openings. Removable, leakproof, 1.2-gal.
(4.6-L) plastic receptacle. Rough Partition Opening: 11" W, 15 1⁄2" H (280
x 395mm). Universal/Barrier-Free Mtg. Ht.: 31" (785mm) to top of unit.
Satin-finish stainless steel. Door has 90° return, conceals flange. Selfclosing panel covers disposal opening. Removable, leak-proof, 1.2-gal.
(4.6-L) plastic receptacle. Rough Wall Opening: 11 1⁄2" W, 17 1⁄4" H,
3 3⁄4" min. depth (290 x 440 x 95mm). Universal/Barrier-Free Mtg. Ht.:
31" (785mm) to top of unit.
353-12 Disposable paper liners. 1,000 per case.
353-12 Disposable paper liners. 1,000 per case.
28
ƒ USA & Canada QuickShip model.
12010_08 28
USA QuickShip model.
9/13/10 10:06 AM
Sanitary Napkin Disposals/Cubicle Collection
ƒB-254
ClassicSeries SURFACE-MOUNTED
SANITARY NAPKIN DISPOSAL
B-3094 ClassicSeries RECESSED
SANITARY NAPKIN DISPOSAL AND TOILET
TISSUE DISPENSER
Satin-finish stainless steel. Disposal door is self-closing. Receptacle
retained in cabinet by tumbler lock. Capacity: 3⁄4-gal. (2.8-L). Holds
two rolls up to 5 1⁄4" (135mm) diameter (1800 sheets). Rough Wall
Opening: 15 5⁄8" W, 11 1⁄4" H, 4" min. depth (395 x 285 x 100mm).
Universal/ Barrier-Free Mtg. Ht.: 30" (760mm) to top of unit.
Satin-finish stainless steel. Door has tumbler lock. Self-closing
panel covers disposal opening. Removable, leak-proof, 1.2-gal.
(4.6-L) plastic receptacle. Unit 10 11⁄16" W, 15 1⁄8" H, 4 1⁄16" D
(270 x 385 x 105mm). Universal/Barrier-Free Mtg. Ht.: 30"
(760mm) to top of unit.
353-12 Disposable paper liners. 1,000 per case.
Theft-Resistant Spindle (Part No. 283-604) available as an option
for above model, see page 26.
ƒB-270
ConturaSeries SURFACE
MOUNTED SANITARY NAPKIN DISPOSAL
B-5270 MatrixSeries SURFACE-MOUNTED
Satin-finish stainless steel. Cover is drawn, one-piece construction;
secured to cabinet with full-length stainless steel piano-hinge. Capacity:
1.0-gal. (3.8-L). Unit 7 1⁄2" W, 10" H, 3 13⁄16" D (190 x 255 x 95mm).
Universal/Barrier-Free Mtg. Ht.: 25–30" (635–760mm) to top of unit.
Durable ABS plastic; grey color. Lid features fingertip handles for easy
access. Capacity: 1.3-gal. (4.8-L). Unit 9 1⁄4" W, 11 3⁄8" H, 3 7⁄8" D
(235 x 290 x 100mm). Universal/ Barrier-Free Mtg. Ht.: 25–30" (635–
760mm) to top of unit. Patented.
270-12 Disposable paper liners. 1,000 per case.
270-12 Disposable paper liners. 1,000 per case.
SANITARY NAPKIN DISPOSAL
B-544
Cubicle Collection
B-542
B-541 SPARE TOILET ROLL HOLDER
B-542 COAT HOOK
See page 25.
See page 35.
B-543 SINGLE ROLL TOILET TISSUE DISPENSER
B-543
See page 25.
B-541
B-544 TOILET BRUSH HOLDER
See page 36.
29
12010_08 29
9/13/10 10:06 AM
Toilet Seat Cover Dispensers
B-4221 ConturaSeries SURFACE
MOUNTED SEAT-COVER DISPENSER
Satin-finish stainless steel. Dispenses 250 single- or half-fold toilet
seat covers. Fills from bottom. Unit 15 3⁄4" W, 11 1⁄4" H, 2 1⁄16" D
(400 x 285 x 55mm). Av. Mtg. Ht.: 45–59" (1145–1500mm) to top
of unit, Barrier-Free, 30–48" (760–1220mm). Allow 5" (125mm)
minimum clearance from bottom of dispenser to top of any
horizontal projection for filling dispenser from below unit.
B-301 ClassicSeries RECESSED
SEAT-COVER DISPENSER
30
ƒB-221
ClassicSeries SURFACE
MOUNTED SEAT-COVER DISPENSER
Satin-finish stainless steel. Seamless beveled flange. Dispenses
500 toilet seat covers. Rough Wall Opening: 15 5⁄8" W, 11" H,
2 5⁄8" min. depth (395 x 285 x 67mm). Av. Mtg. Ht.: 60" (1525mm)
to top of unit; Barrier-Free, 49" (1245mm).
Satin-finish stainless steel. Dispenses 250 single- or half-fold toilet
seat covers. Fills from bottom. Unit 15 3⁄4" W, 11" H, 2" D (400 x
280 x 50mm). Av. Mtg. Ht.: 45–59" (1145–1500mm) to top of unit,
Barrier-Free, 30–48" (760–1220mm). Allow 5" (125mm) minimum
clearance from bottom of dispenser to top of any horizontal projection
for filling dispenser from below unit.
B-3013 TrimLineSeries RECESSED
B-5221 MatrixSeries SURFACE
SEAT-COVER DISPENSER
MOUNTED SEAT-COVER DISPENSER
Satin-finish stainless steel. Door has 90° return, conceals flange.
Dispenses 500 toilet seat covers. Rough Wall Opening: 15 5⁄8" W,
11 1⁄4" H, 2 3⁄4" min. depth (395 x 285 x 70mm). Av. Mtg. Ht.: 60"
(1525mm) to top of unit; Barrier-Free, 49" (1245mm).
Durable ABS plastic; grey color. Dispenses 250 single- or half-fold
toilet seat covers. Fills from bottom. Unit 16 1⁄8" W, 11 1⁄2" H, 2 1⁄2" D
(410 x 290 x 65mm). Av. Mtg. Ht.: 45–59" (1145–1500mm) to top of
unit, Barrier-Free, 30–48" (760–1220mm). Allow 5" (125mm) minimum
clearance from bottom of dispenser to top of any horizontal projection
for filling dispenser from below unit. Patented.
ƒ USA & Canada QuickShip model.
12010_08 30
USA QuickShip model.
9/13/10 10:06 AM
Grab Bars
CONFIGURATIONS, DIMENSIONS, FINISHES:
1 1⁄2 " (38MM) DIA.
STRAIGHT/SATIN
1 1⁄4 " (32MM) DIA.
STRAIGHT/SATIN
B-6806x12" (305mm)
B-6806x18" (455mm)
B-6806x24" (610mm)
B-6806x30" (760mm)
B-6806x36" (915mm)
B-6806x42" (1065mm)
B-6806x48" (1220mm)
B-5806x18" (455mm)
B-5806x24" (610mm
B-5806x30" (760mm)
B-5806x36" (915mm)
B-5806x42" (1065mm)
B-5806x48" (1220mm)
1 1⁄2 " (38MM) DIA.
STRAIGHT/PEENED
1 1⁄4 " (32MM) DIA.
STRAIGHT/PEENED
B-6806.99x18" (455mm)
ƒB-6806.99x24" (610mm)
ƒB-6806.99x30" (760mm)
ƒB-6806.99x36" (915mm)
B-6806.99x42" (1065mm)
B-5806.99x18" (455mm)
ƒB-5806.99x24" (610mm)
ƒB-5806.99x30" (760mm)
ƒB-5806.99x36" (915mm)
B-5806.99x42" (1065mm)
CONCEALED MOUNTING WITH SNAP FLANGE
• Constructed of 18-gauge (1.2mm), type 304
satin-finish stainless steel tubing in 1 1⁄4" and
1 1⁄2" (32 and 38mm) diameters.
• Concealed mounting flange 1⁄8" (3mm) thick,
type 304 stainless steel plate, 2" W x
3 1⁄8" H (50 x 80mm), with screw holes for
concealed anchors.
• Cover is 22-gauge (0.8mm), type 304 stainless
steel with satin finish, 3 1⁄4" (85mm) diameter.
• Cover snaps over mounting flange to
conceal screws.
• Peened nonslip gripping surface available.
SERIES
B-6806*
B-5806*
DIAMETER
1
1 ⁄2" (38mm)
1 1⁄4" (32mm)
TWO-WALL TUB/
SHOWER TOILET
COMPT.
TWO-WALL TUB/
SHOWER TOILET
COMPT.
24" W x 36" D (61 x 91cm)
1 1⁄2" (38mm) Dia.
B-68616 Satin
B-68616.99 Peened
1 1⁄4" (32mm) Dia.
B-58616 Satin
B-58616.99 Peened
36" W x 54" D (91 x 137cm)
1 1⁄2" (38mm) Dia.
B-68137 Satin
B-68137.99 Peened
1 1⁄4" (32mm) Dia.
B-5837 Satin
B-5837.99 Peened
TWO-WALL SHOWER
TWO-WALL
TOILET COMPT.
FINISH*
Satin Finish
Satin Finish
*Peened nonslip gripping surface available. Add suffix
.99 to model number.
OPTIONAL MOUNTING KITS
15 7⁄8" W x 30 7⁄8" D
(40 x 78cm)
1 1⁄2" (38mm) Dia.
B-6861 Satin
B-6861.99 Peened
Order one per flange. Part No. 252-30 (3) sheet-metal screws;
2521-30 (3) machine screws with toggle nuts; 2522-30 (3) machine
screws with expansion shields.
OPTIONAL ANCHOR DEVICES
Order one per flange. Part No. 2583 anchors for œ" to 1"
(19–25mm) panels; 2586 anchors for 1⁄2" (13mm) panels.
Œ
ƒ251-4 WingIt GRAB BAR FASTENER
For 2 1⁄2" and 3 1⁄2" (65 and 90mm) or deeper hollow walls with finished
wall surfaces 1⁄4" to 1 1⁄2" (6 to 38mm) thick. One fastener required for
each flange. Corrosion-resistant stainless steel. Install grab bars without
backing. The fastener will support 300 lbs (136 kg) load. Patented.
42" W x 54" D
(107 x 137 cm)
1 1⁄2" (38mm) Dia.
B-6897 Satin
B-6897.99 Peened
1 1⁄4" (32mm) Dia.
B-5897 Satin
B-5897.99 Peened
SWING UP
29" (74cm) Patented
1 1⁄4" (32mm) Dia.
B-4998 Satin
B-4998.99 Peened
SPECIAL GAMCO GRAB BARS WITHOUT
THE SPECIAL ORDER
• Customized configurations and dimensions.
• Runs of one to thousands.
• Brass and bronze metallic finishes.
• Electrostatic precise color matching.
WingIt™ is a trademark of WingIt Innovations, LLC.
31
12010_08 31
9/13/10 10:06 AM
Bathroom Accessories
B-680 SURFACE-MOUNTED SOAP DISH
B-673 SURFACE-MOUNTED TOWEL BAR
Bright-polished stainless steel. Drawn, one-piece soap dish welded to
support arm and flange. Two ridges hold soap; two drain holes. Unit
4 ¼" W, 2" H (110 x 50mm); projects 3 3⁄8" (85mm) from wall.
Bright-polished stainless steel. 3⁄4" (19mm) square towel bar. Available
in 18" and 24" lengths (455, 610mm). Projects 3 1⁄4" (85mm) from wall.
B-6737 Similar to B-673, but with satin finish. 24" length (610mm).
B-6807 Similar to B-680, but with satin finish.
B-687 SURFACE-MOUNTED DOOR BUMPER
B-674 SURFACE-MOUNTED TOWEL BAR
Bright-polished stainless steel. Flange is 2" x 2" (50 x 50mm).
Black nylon post with black neoprene bumper. Projects 2 1⁄8"
(55mm) from wall.
Bright-polished stainless steel. Round 3⁄4" (19mm) diameter towel bar.
Available in 18" and 24" lengths (455, 610mm). Projects 3 1⁄4" (85mm).
B-683 SURFACE-MOUNTED TOILETRY SHELF
B-530 EXTRA-HEAVY-DUTY SURFACE-MOUNTED
Bright-polished stainless steel. 24" length (610mm). Shelf 4 3⁄4"
(120mm) wide, projects 5 3⁄4" (145mm) from wall. Edges are
roll-formed for safety.
32
B-6747 Similar to B-674, but with satin finish. 24" length (610mm).
TOWEL BAR
For use in hospital and hotel bathrooms. 1" (25mm) diameter bar is
18-gauge (1.2mm), type 304 stainless steel, satin finish. mounting with
snap flange. Withstands 900 lbs (408 kg) downward pull when properly
installed. Available in 18" and 24" lengths (455, 610mm).
B-676 SURFACE-MOUNTED TOWEL SHELF
WITH TOWEL BAR
B-8397 SURFACE-MOUNTED 100-FACIAL
TISSUE DISPENSER
Bright-polished stainless steel. Shelf 6 1⁄4" (160mm) wide, consists of
four 5⁄16" (8mm) square tubes. 5⁄16" (8mm) square towel bar below shelf.
24" length (610mm). Projects 8 1⁄2" (215mm) from wall.
Dispenses one pack of 100 two-ply facial tissues. Cabinet type 304
stainless steel, satin finish. Equipped with concealed locking device;
opens with key provided. Concealed wall plate is 22-gauge (0.8mm),
type 304 stainless steel. Unit 10 1⁄4" W, 5 3⁄16" H, 2 1⁄4" D (260 x
130 x 55mm).
ƒ USA & Canada QuickShip model.
12010_08 32
USA QuickShip model.
9/13/10 10:06 AM
Shower/Tub Accessories
2 1⁄2" (65mm) Square Flange
for B-6047 and B-6107
ƒB-6047
ClassicSeries EXTRA
HEAVY-DUTY SHOWER CURTAIN ROD
Type 304 stainless steel, satin finish. 18-gauge (1.2mm), 1 1⁄4" (32mm)
diameter rod. Flanges are 2 1⁄2" (65mm) square. Available in 36"
(915mm), 48" (1220mm), ƒ60" (1525mm), 72" (1830mm) lengths.
ƒB-6107
ClassicSeries HEAVY-DUTY
SHOWER CURTAIN ROD Similar to B-6047, but with
20-gauge (1.0mm), 1" (25mm) diameter rod. Available in 36" (915mm),
48" (1220mm), ƒ60" (1525mm), 72" (1830mm) lengths.
14 7/8 "
380mm
17"
430mm
ƒB-207 SHOWER CURTAIN ROD WITH
25 1/8 "
640mm
26 7/8 "
685mm
CONCEALED MOUNTING
1" (25mm) diameter rod is 20-gauge (1.0mm), type 304 stainless steel,
satin finish. 1 3⁄8" (35mm) diameter flanges are chrome-plated plastic,
bright-polished finish; mount on concealed wall brackets. Available in 36"
(915mm), 48" (1220mm), ƒ60" (1525mm), 72" (1830mm) lengths.
3 7/16 "
85mm
1"
B-398
25mm
Unit combines adjustable shelves, mirror, used razor blade slot, and
toothbrush holder.
B-398 RECESSED MEDICINE CABINET
Type 304 stainless steel, satin finish. Mirror: No. 1 quality, 1⁄4" (6mm)
glass electrolytically copper-plated. 15-year guarantee against silver
spoilage. Door has full-length stainless steel piano-hinge, magnetic catch
and cable doorstop. Four adjustable stainless steel shelves. Cabinet
may be inverted for right- or left-hand door swing. Rough Wall Opening:
15 1⁄4" W, 25 1⁄2" H, 3 5⁄8" min. depth (385 x 650 x 90mm). Av. Mtg. Ht.:
74" (1880mm) to top of unit; Barrier-Free, 66 1⁄2" (1690mm).
B-299 Surface-Mounted Medicine Cabinet Similar to B-398. Unit
17" W, 26 7⁄8" H, 5" D (430 x 685 x 130mm).
B-397 RECESSED MEDICINE CABINET
All-steel cabinet with baked white enamel finish. Three adjustable
plastic shelves. Mirror: No. 1 quality, 1⁄4" (6mm) glass electrolytically
copper-plated. Door has enameled steel piano-hinge and magnetic
catch. Door is 15 1⁄2" W, 25 7⁄8" H (405 x 655mm). Rough Wall
Opening: 14" W, 23 5⁄8" H, 3 1⁄2" min. depth (355 x 600 x 90mm) Av.
Mtg. Ht.: 73" (1855mm) to top of unit; Barrier-Free, 65 1⁄2" (1665mm).
B-297 SURFACE-MOUNTED
MEDICINE CABINET
All-steel cabinet and two fixed shelves with baked white enamel finish.
Mirror: No. 1 quality, 1⁄8" (3mm) glass electrolytically copper-plated.
Door has enameled steel piano-hinge and magnetic catch. Door is
14 1⁄8" W, 20 1⁄4" H (360 x 515mm). Unit 3 3⁄4" (95mm) deep. Av. Mtg.
Ht.: 69" (1755mm) to top of unit; Barrier-Free, 60" (1525mm).
ƒ204-2
VINYL SHOWER CURTAIN
Opaque, matte white vinyl, 0.008" (0.2mm) thick, contains antibacterial and flame-retardant agents. Nickel-plated brass grommets
along top, one every 6" (150mm). Bottom and sides are hemmed.
Hooks are not included. Curtain 42" W, 72" H (1065 x 1830mm).
Requires 7 hooks.
ƒ204-3 Similar to 204-2, but curtain is 70" W, 72" H (1780 x
1830mm). Requires 12 hooks.
ƒ204-1
SHOWER CURTAIN HOOK Type 304 stainless
steel for use on 1" and 1 1⁄4" (25 and 32mm) diameter shower
curtain rods.
33
12010_08 33
9/13/10 10:06 AM
Shower/Tub Accessories
B-4390 RECESSED HEAVY-DUTY
SOAP DISH AND BAR
Type 304 stainless steel, matte polished finish. Mounting clamp
for stud walls. Unit 7 3⁄16" W, 5" H (185 x 125mm). Rough Wall
Opening: 6" W, 4" H, 4" min. depth (150 x 100 x 100mm).
Barrier-Free Mtg. Ht.: 38–48" (965–1220mm) above the finish
floor on same wall as shower head.
B-4380 Similar to B-4390, but without bar.
B-518 FOLDING SHOWER SEAT
Complies with ADA Barrier-Free Accessibility Guidelines.
Foam-padded, white, water-resistant Naugahyde seat 1 1⁄2" (38mm)
thick, with enclosed 1⁄2" (13mm) plywood base. Frame and mounting
brackets are type 304 stainless steel and feature self-locking
mechanism. Supports up to 360 lbs (163 kg) when properly installed.
Seat 32 7⁄8" (835mm) wide, projects 22 11⁄16" (575mm) from wall.
Universal/Barrier-Free Mtg. Ht.: 17–19" (430–485mm) from top
of seat to floor. Left-hand seat.
B-517 Similar to B-518, but with right-hand seat.
FOLDED DOWN
FOLDED UP
ƒB-5191
FOLDING SHOWER/DRESSING
AREA SEAT
Compact design. Seat is constructed of durable, water-resistant, ivorycolored, 5⁄16" (8mm) thick solid phenolic. Frame and mounting bracket
are type 304 stainless steel and feature self-locking mechanism.
Supports up to 450 lbs (204 kg) when properly installed. Seat 18"
(455mm) wide, projects 15 13⁄16" (400mm) from wall. Universal/BarrierFree Mtg. Ht.: 17–19" (430–485mm) from top of seat to floor.
CAUTION NOTE
ƒB-5181
REVERSIBLE FOLDING SHOWER SEAT
Complies with ADA Barrier-Free Accessibility Guidelines. Seat is
constructed of durable, water-resistant, ivory-colored 1⁄2" (13mm) thick
solid phenolic. Reversible for left- or right-hand field installation. Frame
and mounting brackets are type 304 stainless steel with self-locking
mechanism. Supports up to 360 lbs (163 kg) when properly installed.
Seat 33" (840mm) wide, projects 22 5⁄16" (565mm) from wall.
Universal/Barrier-Free Mtg. Ht.:17–19" (430–485mm) from top of
seat to floor. Left-hand seat shown.
CAUTION NOTE
Rectangular Folding Shower Seat: B-5191
Rectangular folding shower seat, when properly installed and maintained,
has sufficient strength to support a single user up to a maximum static
load of 450 lbs (204 kg). In the interests of safety and the protection of
end users, this seat should not be used to support weights exceeding
450 lbs (204 kg). Failure to abide by this warning may result in seat
malfunctioning, potentially causing minor to moderate injury.
TOTAL WEIGHT ON SEAT MUST NOT EXCEED 450 LBS (204 KG).
L-shaped Folding Shower Seats: B-517, B-518, B-5181
L-shaped folding shower seats, when properly installed and maintained,
have sufficient strength to support a single user up to a maximum static
load of 360 lbs (163 kg). In the interests of safety and the protection of
end users, these seats should not be used to support weights exceeding
360 lbs (163 kg) . Failure to abide by this warning may result in seats
malfunctioning, potentially causing minor to moderate injury.
TOTAL WEIGHT ON SEAT MUST NOT EXCEED 360 LBS (163 KG).
DESIGNER’S NOTE:
Solid phenolic seats available in other colors on special order.
See Bobrick Solid Phenolic Color Guide.
34
ƒ USA & Canada QuickShip model.
12010_08 34
USA QuickShip model.
9/13/10 10:06 AM
Hooks/Shelves/Custodial Accessories
B-670 UTILITY HOOK
B-677 TOWEL PIN
Bright-polished stainless steel. For robes, shoe-shine cloth, and
sanitary napkin disposal bag. Flange is 2" x 2" (50 x 50mm). Hook
1
⁄2" (13mm) wide, projects 2" (50mm) from wall.
Bright-polished stainless steel. Flange is 2" x 2" (50 x 50mm).
Projects 3 3⁄8" (85mm) from wall.
B-6777 Similar to B-677, but with satin finish.
B-6707 Similar to B-670, but with satin finish.
ƒB-671
SINGLE ROBE HOOK
Bright-polished satin finish. Flange is 2" x 2" (50 x 50mm).
Hook is 1 1⁄4" high, 1 1⁄4" wide (30 x 30mm). Projects 2" (50mm)
from wall.
ƒB-212
CLOTHES HOOK AND BUMPER
Solid aluminum casting, matte finish. Rubber bumper protects wall
or partition surfaces.
ƒB-6717 Similar to B-671, but with satin finish.
B-7671 SINGLE ROBE HOOK Similar to B-671, but hook is
1 5⁄8" high, 13⁄16" wide (40 x 20mm). Projects 1 5⁄8" (40mm) from wall.
B-76717 Similar to B-7671, but with satin finish.
ƒB-233
CLOTHES HOOK
11-gauge (3.2mm), type 304 stainless steel,
satin finish. Hook is 1 1⁄4" x 1 1⁄4" (30 x 30mm)
and projects 1 1⁄8" (30mm) from wall. Unit
is 2 1⁄4" (55mm) high.
B-672 DOUBLE ROBE HOOK
Satin-finish stainless steel. Contoured 4" (100mm) wide bar
forms hook at each end. Flange is 2" x 2" (50 x 50mm). Projects
2 5⁄16" (60mm) from wall.
B-6727 Similar to B-672, but with satin finish.
B-7672 DOUBLE ROBE HOOK Similar to B-672, but
contoured hook is 3 15⁄16" (100mm) wide. Projects 1 7⁄8" (50mm)
from wall.
B-76727 Similar to B-7672, but with satin finish.
NEW
B-542 Cubicle Collection
COAT HOOK
Satin-finish stainless steel. Threaded
flange conceals mounting plate, provides
snug fit to the wall. Flange has 1 15⁄16"
(50mm) diameter. Hook is 1⁄2" (13mm)
high. Projects 1 5⁄16" (35mm).
See page 29 for the complete Cubicle
Collection.
35
12010_08 35
9/13/10 10:06 AM
Hooks/Shelves/Custodial Accessories
NEW
B-2116
B-211
ƒB-2116
HEAVY-DUTY CLOTHES HOOK WITH
CONCEALED MOUNTING
B-544 Cubicle Collection TOILET BRUSH
Locks to wall plate with three stainless steel setscrews for theftresistant mounting. Hook and flange are one-piece brass casting
with satin nickel-plated finish to match stainless steel. Withstands
300 lbs (136 kg) downward pull. Flange diameter: 2 3⁄4" (70mm).
Unit projects 3 7⁄16" (85mm).
Heavy-duty type 304 stainless steel, satin finish. Vandal-resistant
wall mounting bracket. Stainless steel handle with replaceable
nylon brush head. Water reservoir included. Overall height is
15 7⁄8 " (405 mm). Unit projects 4 1⁄16" (105mm).
See page 29 for the complete Cubicle Collection.
HOLDER
ƒB-211 Similar to B-2116, but with three exposed countersunk
mounting screw holes.
ƒB-682
HAT AND COAT HOOK
Bright-polished stainless steel. Flange is 2" x 2" (50 x 50mm).
Hook 1" W, 6 1⁄2" H (25 x 165mm); projects 31⁄16" (80mm) from
wall. Concealed wall plate.
ƒB-6827 Similar to B-682, but with satin finish.
ƒ B-232
HOOK STRIP
Type 304 stainless steel, satin finish. Hooks are 1" W, 6 1⁄2" H
(25 x 165mm); project 2 1⁄4" (55mm) from wall. Mounting strip
is 4" (100mm) high and has 1⁄4" (6mm) return.
MODEL NO.
ƒ B-232x24
B-983 VANDAL-RESISTANT CLOTHES HOOK
(SECURED FROM FRONT)
Type 304 satin-finish stainless steel. Back plate is 14-gauge (2mm).
Hook snaps down for safety if excessively loaded. Back plate 4" W,
4" H, 7⁄8" D (100 x 100 x 20mm). Hook projects 1 1⁄4" (30mm) from
back plate. Furnished with tamper-resistant mounting screws.
36
ƒ USA & Canada QuickShip model.
12010_08 36
NO. HOOKS
LENGTH
3
24" (610mm)
B-985 VANDAL-RESISTANT HOOK STRIP
Back plate is 14-gauge (2mm), type 304, satin-finish stainless
steel. Four stainless steel hooks snap down for safety if
excessively loaded. Furnished with tamper-resistant mounting
screws. Unit 18" W, 5 1⁄2" H, 7⁄8" D (455 x 140 x 20mm).
Hooks project 1 1⁄4" (30mm) from back plate.
USA QuickShip model.
9/13/10 10:06 AM
Hooks/Shelves/Custodial Accessories
B-295 STAINLESS STEEL SHELF
5" (125mm) wide, 18-gauge (1.2mm), type 304 stainless steel,
satin finish. 3⁄4" (19mm) return edge; front edge is hemmed for
safety. Brackets are 16-gauge (1.6mm). Available in one-piece
lengths: 16", 18", 24", (405, 455, 610mm).
B-296 Similar to B-295, but shelf is 6" (150mm) wide,
18" (455mm) lengths.
B-298 Similar to B-295, but shelf is 8" (205mm) wide, 18", 24"
B-224 SHELF WITH MOP AND BROOM HOLDERS
AND RAG HOOKS
Shelf is 18-gauge (1.2mm), type 304 stainless steel, satin finish; 36"
Long, 6" H, 8" D (915 x 150 x 205mm). Four anti-slip mop holders have
spring-loaded rubber cam that grips handles 7⁄8" to 1 1⁄4" (20–30mm)
diameter. Holds mops 8" (205mm) from wall. Three stainless steel rag
hooks. Rod for wet rags below shelf.
(455, 610mm) lengths.
B-287 FOLDING UTILITY SHELF
Easily installed on toilet partition or wall. Type 304 stainless steel,
satin finish. Pull-down shelf returns to upright position when not in
use. Supports 100 lbs (45.36 kg) when properly installed. Shelf
14 1⁄2" long, 5 3⁄4" wide (370 x 145mm).
B-239 SHELF WITH MOP AND BROOM HOLDERS
AND HOOKS
Shelf is 18-gauge (1.2mm), type 304 stainless steel, satin finish;
34" Long, 13" H, 8" D (865 x 330 x 205mm). Three anti-slip mop
holders have spring-loaded rubber cam that grips handles 7⁄8" to 1 1⁄4"
(20–30mm) diameter. Four stainless steel hooks.
B-223 MOP AND BROOM HOLDER
B-505 RECESSED SPECIMEN PASS-THRU CABINET
Type 304 stainless steel, satin finish. Anti-slip mop holders have
spring-loaded rubber cam that grips handles 7⁄8" to 1 1⁄4" (20–30mm)
diameter. Holds mops 3 1⁄4" (85mm) from wall. Height 5" (125mm).
Provides convenient passage for specimen from patient area to laboratory.
Mounts in walls 3" to 5 3⁄4" (75–145mm) thick. Type 304 stainless steel,
satin finish. Self-closing doors. Interlocking mechanism prevents both
doors from being open at the same time; provides sight barrier. Removable
stainless steel tray. Rough Wall Opening: 11 1⁄2" W, 10 7⁄8" H (290 x
275mm); 3" to 5 3⁄4" (75–145mm) thick.
MODEL NO.
NO. HOLDERS
LENGTH
B-223x24
B-223x36
3
4
24" (610mm)
36" (915mm)
37
12010_08 37
9/13/10 10:06 AM
Koala Kare Child Care Products
Customers have the option of ordering Koala
products and colors listed on page 38 from
Bobrick or Koala. Products on page 39 are
ordered through Koala only.
NEW
ƒKB200-00
HORIZONTAL, WALL-MOUNTED
Cream-color polypropylene cabinet and bed. Unit 35" W x 22" H (890 x
560mm). Depth (closed) 4" (100mm). Extension (open) 22 1⁄2" (570mm).
Patented. Available from Bobrick in cream-color only.
Please, one baby at time. The three babies shown are to dramatize the strength of the KB200.
KB110-SSRE HORIZONTAL, RECESSED MOUNTED
KB110-SSWM HORIZONTAL, WALL-MOUNTED
18-gauge, type 304 satin stainless steel exterior finish with molded grey
color polyethylene interior. Unit 37" W x 23" H (940 x 585mm). Depth
(closed) 3⁄ 4" (20mm). Extension (open) 15 1⁄4" (385mm). Rough Wall
Opening: 35 1⁄ 2" W x 20 1⁄ 2" H (900 x 520mm), 4" (100mm) min. depth.
18-gauge, type 304 satin stainless steel exterior finish with molded grey
color polyethylene interior. Unit 35 1⁄4" W, 20" H (890 x 510mm). Depth
(closed) 4" (100mm). Extension (open) 15 3⁄ 16" (385mm).
ƒKB101-00
VERTICAL, WALL-MOUNTED
Cream-color polyethylene cabinet and bed. Unit 22" W x 35 1⁄2" H
(560 x 900mm). Depth (closed) 5 1⁄4" (135mm). Extension (open)
35" (890mm). Available from Bobrick in cream-color only.
38
KB102-00 CHILD PROTECTION SEAT,
WALL-MOUNTED
Cream-color polyethylene seat and back. Unit 12 1⁄4" W x 18 3⁄4" H
(310 x 475mm). Depth (closed) 5 5⁄8" (145mm). Extension (open)
12 1⁄2" (315mm). Available from Bobrick in cream-color only.
ƒ USA & Canada QuickShip model.
12010_08 38
9/13/10 10:06 AM
Available from Koala Kare Products
A Division of Bobrick, Centennial, Colorado
NEW
www.koalabear.com
(888) 733-3456
Customers have the option of
ordering Koala products and
colors listed on page 38 from
Bobrick or Koala. Products on
page 39 are ordered through Koala only. For
copies of Koala’s full line Baby Changing
Station Catalog, or for the name of your
Bobrick-Koala Representative, please visit us
on-line or telephone toll-free.
®
KB200 HORIZONTAL, WALL-MOUNTED
All colors available from Koala Kare: add suffix number: Cream (-00),
Grey (-01), White Granite (-05) and Earth (-11). Patented.
WITH STAINLESS STEEL FLANGE
KB112-01RE RECESSED COUNTERTOP-MOUNTED
KB112-01CT COUNTERTOP SURFACE-MOUNTED
See Koala catalog for complete product data.
See Koala catalog for complete product data. Patented.
KB111-SSRE VERTICAL, SEMI-RECESSED MOUNTED
KB111-SSWM VERTICAL, WALL-MOUNTED
KB101 VERTICAL, WALL-MOUNTED
KB100-ST HORIZONTAL, RECESSED-MOUNTED
See Koala catalog for complete product data.
KB150-99 SANITARY BED LINERS
See Koala catalog for complete product data.
DESIGNER’S NOTES:
1. Full-length steel-on-steel hinges with 11-gauge steel mounting
supports. 2. Complies with ANSI S117.1 Accessible and Usable Buildings
and Facilities, ASTM F2285-04 (formerly ASTM PS125) Standard
Consumer Safety Performance Specification for Diaper Changing Tables
for Commercial Use, ANSI Z535.4 Product Safety Signs and Labels,
ASTM G21 Antifungal and ASTM G22 Antibacterial Standards,
EN 12221-1/-2 European Standards (KB200 only), ADA Accessibility
Standards for height, reach, projection, operation, overlap wheelchair
turning radius when properly installed. 3. Constructed of high-density
polyethylene (KB200 is constructed of polypropylene) with exclusive
Microban antimicrobial product protection. 4. Replaceable nylon safety
straps, hooks for bags and purses. 5. All Baby Changing Station models
equipped with built-in Sanitary Bed Liner Dispensers.
All colors available from Koala Kare: add suffix number: Cream (-00),
Grey (-01) and White Granite (-05).
KB102-00 CHILD PROTECTION SEAT, WALL-MOUNTED
All colors available from Koala Kare: add suffix number: Cream (-00),
Grey (-01).
MICROBAN® ANTIMICROBIAL PRODUCT PROTECTION:
A KOALA BABY CHANGING STATION EXCLUSIVE.
Microban technology is built into all Koala Baby Changing Stations and
becomes an intrinsic part of the Station. When microbes, such as bacteria,
mold and mildew that can cause stains, odors and product deterioration
come into contact with the station surface, Microban protection penetrates
the cell wall of the microbe and disrupts key cell functions so that the
microbe cannot function, grow or reproduce. See Technical Bulletin, TB-12.
Microban is a registered trademark of Microban Products Company.
39
12010_08 39
9/13/10 10:06 AM
Company Directory
Product Warranties
BOBRICK WASHROOM EQUIPMENT, INC.
The following Bobrick products are warranted to be free from defects in workmanship
and material under normal usage from the date of purchase for the periods set forth
below. (Rust and discoloration to stainless steel parts resulting from exposure to
harsh environmental and/or chemical conditions are not considered to be defects in
workmanship or material and there is no express or implied warranty for such
condition. Refer to Bobrick Bulletin TB-21, Effective Ways to Clean Stainless Steel):
LOS ANGELES:+DUW6WUHHW
1RUWK+ROO\ZRRG&DOLIRUQLD
:DVKURRP$FFHVVRULHV)$;
e-mail: [email protected]
7RLOHW3DUWLWLRQV)$;
e-mail: [email protected]
JACKSON, TN:%REULFN'ULYH
-DFNVRQ71
)$;
NEW YORK:&RPPHUFH'ULYH
&OLIWRQ3DUN1<
)$;
e-mail: [email protected]
CANADA: BOBRICK WASHROOM EQUIPMENT COMPANY
5RODUN'ULYH6FDUERURXJK2QWDULR05%
2QWDULR(DVW)$;
e-mail: [email protected]
0DQLWRED:HVW)$;
e-mail: [email protected]
INTERNATIONAL SALES:+DUW6WUHHW
1RUWK+ROO\ZRRG&DOLIRUQLD
)$;
e-mail: [email protected]
AUSTRALIA: BOBRICK WASHROOM EQUIPMENT PTY. LTD.
)$;
e-mail: [email protected]
GERMANY: BOBRICK WASHROOM EQUIPMENT
)$;
e-mail: [email protected]
UNITED KINGDOM: BOBRICK WASHROOM EQUIPMENT LTD.
)$;
e-mail: [email protected]
WWW.BOBRICK.COM
GAMCO COMMERCIAL RESTROOM ACCESSORIES
A Division of Bobrick
One Gamco Place
Durant, OK 74701-1910
(800) 451-5766; FAX: (580) 920-2050
e-mail: [email protected]
WWW.GAMCOUSA.COM
KOALA KARE PRODUCTS
A Division of Bobrick
6982 S. Quentin St.
Centennial, CO 80112-3945
(888) 733-3456; FAX: (303) 539-8399
e-mail: [email protected]
WWW.KOALABEAR.COM
Illustrations and descriptions herein are applicable to production as of the
date of this catalog. The manufacturer reserves the right and does from
time to time make changes and improvements in designs and dimensions.
Catalog No. P-1006, 100M. September 30, 2010.
Washroom Accessories/Soap Dispensers
ConturaSeries Washroom Accessories
Soap Dispensers
B-306, B-4063, B-4112, B-822 Series,
B-826, B-8263
B-830 SureFlo Soap System Soap Pumps
Limited Warranty
3 years
3 years
Lifetime warranty provided
Bobrick SureFlo Soap is used
exclusively with this product
The following Bobrick mirrors are warranted against silver spoilage from the date of
purchase for the periods set forth below:
Mirrors
Limited Warranty
B-290, B-2908, B-292, B-293, B-294 Series
15 years
B-165, B-1658, B-166 Series
The following Bobrick hand dryers are warranted to be free from defects in workmanship and material under normal usage from the date of purchase for the periods set
forth below:
Hand Dryers
Limited Warranty
B-700, B-7120, B-7128
Motor brushes for 3 years;
B-750 AirCraft
all other parts for 10 years
B-740, B-748 Eclipse
B-708 AirGuard
B-710 Compac
1 year
Koala Kare products are backed by a 5-year limited liability warranty to be free of
defects in workmanship and material, and a 5-year replacement policy against
vandalism.
OTHER PRODUCTS:
Bobrick washroom accessories not listed above are warranted to be free from
defects in workmanship and material under normal usage service for one year
from the date of purchase.
LIMITATIONS ON WARRANTIES:
In all instances, the purchaser’s exclusive remedy against Bobrick is for the repair or
replacement, at Bobrick’s option, of warranted defective products or parts. Bobrick
will also bear the cost of the purchaser’s return of defective products or parts to
Bobrick. Bobrick’s warranties set forth above do not cover damage resulting from
vandalism. No other remedy (including, but not limited to, damages for field labor
charges, lost profits, lost sales, injury to persons or property or any other incidental
or consequential losses) is available.
PATENTS:
The Bobrick products shown in this catalog with the notation “Patented” are protected under one or more of the
following Patent Numbers:
Canada: 2342510, 2336013, 2311345, 2309470, 2220402, 91501; United States: 7469779, 6502721,
6276027, 6131771, 6129245, 6119901, 6032819, 5988451, 5987677, 5871113, 5476197, 5377908,
5261619, 5226625, D605866, D601843, D426412, D425253, D420764, D416726, D415857, D413419,
D401708, D401093, D388578, D387590, D387229, D386027, D385445. Other patents pending.
Components of Models B-2974, B-29744, B-3974, B-39747, B-3979, 3974-50 and B-72974 are covered by
patent numbers owned by our supplier: Canada: 2572341, 2533000, 2489669; United States: 7594622,
7296765, 7084592, 7040566.
Components of Models B-3961, B-39617, B-39619, B-72860 and B-2860 are covered by patent numbers owned
by our supplier: Canada: 2439918; United States: 6553879, 6314850.
Components of Part No. 251-4 are covered by patent numbers owned by our supplier: Canada: 2308182;
United States: 6007285, 5944466.
AirGuard, CompacDryer, MatrixSeries, TowelMate, TrimLineSeries are
each trademarks; AirCraft, Bobrick, ClassicSeries, ConturaSeries,
Eclipse, Koala, Koala Kare, Koala Kare Products, LinerMate, LiquidMate,
QuickƒShip, SureFlo are each registered trademarks of Bobrick
Washroom Equipment, Inc.
© 2010 Bobrick Washroom Equipment, Inc. Printed in U.S.A.
12010_08 40
%2%5,&.&20
9/13/10 10:06 AM
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement