Grounding and Bonding - Hubbell Premise Wiring
®
Premise Wiring
Grounding and
Bonding
Compatibility
Coding
Color-coded product mounting dimensions throughout this guide allow for visual matching of
lugs and grounding kits to the mounting locations on busbars. From page to page, matching
color indicates compatibility.
The colors utilized here do not physically appear on the lugs, busbars or other components. These
colors are intended to aid the selection process by organizing the requirements for building a
grounding network.
ANSI/TIA-607-B; September 2011
• Generic Telecommunications Bonding and Grounding (Earthing) for Customer Premises
®
• Standards and Publications are adopted by TIA in accordance with the American National
Standards Institute (ANSI) patent policy
Standards
ANSI/NECA/BICSI 607-2011; 2011
• Standard for telecommunications bonding and grounding planning and installation methods for
commercial buildings
• National Electrical Installation Standards (NEISTM) are designed to improve communication
among specifiers, purchasers, and suppliers of electrical construction services. This standard has
been prepared by BICSI®/NECA® under joint jurisdiction of BICSI and NECA, and approved by
consensus ballot in accordance with the requirements of ANSI. This publication is intended to
comply with the edition of the National Electrical Code (NEC®) in effect at the time
of publication.
NEC Article 250
• This article covers general grounding and bonding requirements and practices within
electrical installations
The above standards differ; refer to the specified standard to ensure compliance for product selection and installation.
®
Premise Wiring
2
The Bonding Network
Room Scenario
D
TEBC Bracket for Ladder
A HGBTEBCBRKL10
C
TEBC 12ft with double lug
B HGRKTD144DB
C
Ladder tray jumper
HGRKTD9D
D
Ladder to TGB Conductor
HGRKTD60DB
Conductor with C-Tap to
E 76” RGB
HGRKTD60C46
F
A
G
B
F
E
K
J
Conductor with C-Tap to 19” RGB
HGRKTDA60C46
I
Conductor with C-Tap to 36” RGB
G
HGRKTDB60C46
H
76” x ¾” RGB Busbar
HBBBVR76KT
I
19” Horizontal RGB
HBBBHR19KT
J
36” x ¾” RGB Busbar
HBBBVR36KT
K
10” x 2” TGB Busbar
HBBB14210A
H
Building Layout
A TGB
B
TBB
Bonding Backbone
C
Compression Lug
or Tap
B
A
D Building Steel Bond
E Service Panel
C
F Ground Rod
G
D
I
G Compression Tap
E
H
H Pipe Clamp
I
F
TMGB
3
Busbar Kits
On-Rail Kits
Description
Material
Catalog No.
On-rail mounted; 19” rack grounding busbar
Copper
HGRKTHC*
Contents:
• 19” busbar
• Insulators: (2) nylon bushings, (2) nylon washers
• Mounting hardware: (2) M6 stainless screws,
(2) #12-24 stainless screws
• Lug (DA) crimped to 60”, 6AWG
• Lug Mount: (8) #6-32 stainless screws
• ESD port for 4mm banana plug
• VELCRO® strap
• Antioxidant
Tin-plated
HGRKTHT*
Description
Material
Catalog No.
In-cabinet mounted; 36” rack grounding busbar
Copper
HGRKTVC*
*For 10 pack, add 10 to the end of the Catalog No.
In-Cabinet Kits
Contents:
• 19” busbar
• Insulators: (2) nylon bushings, (2) nylon washers
• Mounting hardware: (2) M6 stainless screws,
(2) #12-24 stainless screws
Tin-plated
• Lug (DA) crimped to 60”, 6AWG
• Lug Mount: (8) #6-32 stainless screws
• ESD port for 4mm banana plug
• VELCRO® strap
• Antioxidant
HGRKTVT*
*For 10 pack, add 10 to the end of the Catalog No.
TGB and TMGB Kits
Description
TGB Kit Contents:
• Copper busbar
with stainless steel
brackets
and insulators
• (1) 6AWG lug
• (1) 2AWG lug
• (2) 2/0AWG lug
• (1) 4/0AWG lug
• Stainless steel lug
mounting hardware
• Penetrox antioxidant
• Ground label
TMGB Kit Contents:
• Copper busbar
with stainless steel
brackets
and insulators
• (1) 6AWG lug
• (1) 2AWG lug
• (2) 2/0AWG lug
• (1) 4/0AWG lug
• Stainless steel lug
mounting hardware
• Penetrox antioxidant
• Ground label
VELCRO® is a registered trademark of Velcro Industries B.V.
®
Premise Wiring
4
Size
Catalog No.
2” x 10”
HGRKTTGB10A
4” x 16”
HGRKTTMGB16H
Ground Conductor Kits
All Ground Conductor Kits Include:
Lug and Tap
Lug
Traceable, crimped, die
indexed 7, long barrel,
inspection window
Tap
C-tap/H-tap
Hardware
Hardware
(2) #12-24 ss screws;
(2) #12-24 ss hex nuts;
(2) #12 ss flat washers;
(2) M6 ss screws
Accessories
Labels
Caution label applied at
both ends; circle ground
reflective sticker
Antioxidant
0.5oz tube Penetrox
Common Ground Conductor Kits
Hole Mounting Dimensions
Common
Application
Ladder tray jumper
Catalog No.
HGRKTD9D
IF THIS CONNECTOR OR CABLE
IS LOOSE OR MUST BE REMOVED,
PLEASE CALL THE BUILDING
TELECOMMUNICATIONS MANAGER
Lug 1
D
Conductor
Length
9”
Lug 2
D
Lug
Style
Hole
Hole
Diameter Spacing
Angle
S
0.25”
–
0
HGRKTD30S
Mounted busbar
suppressor to rail
D
30”
S
D
0.25”
0.625”
0
HGRKTD30DN
Front to rear rail jumper
(network cabinet)
D
30”
DN
DF
0.25”
0.625”
45
HGRKTD45DN
Front to rear rail jumper
(server cabinet
D
45”
DN
DN
0.25”
0.625”
90
HGRKTDA144D
19” rail mounted busbar to
wall mounted busbar
DA
144”
D
DA
0.25”
0.75”
0
HGRKTD30KS25
Fiber armor grounding
D
30”
KS25
DB
0.25”
1.0”
0
How to Configure Lug-Lug Ground Conductor Kits
To create a ground kit part number, add three characteristics to the base HGRKT. Example HGRKTDA30DN is shown below.
LUG 1
Catalog No.
D
DA
DB
LENGTH (IN)
Catalog No.
30
45
60
90
144
LUG 2
Catalog No.
D
DF
DN
DA
DB
Example:
HGRKT
LUG 1
DA
Lug 1
LENGTH (IN)
30
LUG 2
DN
Length
IF THIS CONNECTION OR CABLE IS
LOOSE OR MUST BE REMOVED
Lug 2
IF THIS CONNECTION OR CABLE IS
LOOSE OR MUST BE REMOVED
BASE
Catalog No.
HGRKT
Many configurations are possible to fit any installation.
How to Configure Lug-Tap Ground Conductor Kits
To create a ground kit part number, add three characteristics to the base HGRKT. Example HGRKTDA30YH6 is shown below.
BASE
Catalog No.
HGRKT
LUG
Catalog No.
D
DA
DF
LENGTH (IN)
Catalog No.
30
45
60
TAP
Catalog No.
YC4
C46
YH6
Example:
HGRKT
LUG
DA
Lug
LENGTH (IN)
30
TAP
YH6
Length
Tap
IF THIS CONNECTION OR CABLE IS
LOOSE OR MUST BE REMOVED
Many configurations are possible to fit any installation.
5
Compression Lugs
Lug Reference
• Solid copper construction and tin plated
• UL Listed 90° C, 600V to 35kV
• Die Index Traceable
• UL and CSA Listed
Hole Diameter:
38 = 3/8” = 0.375”
Window:
Inspect Wire
Barrel Length:
Long Series
Die Index:
Match with Traceable Die
Lugs
A
90˚
45˚
S
H
Style
Single
Kit
S
Pkg Qty
Barrel
Color
A= H=
S=
Angle Hole
Spacing
0°
0.250” –
6AWG
50
4AWG
50
2AWG
25
1AWG
25
1/0
10
2/0
10
3/0
10
Blue
Gray
Brown
Green
Pink
Black
Orange
HGBL06S
HGBL04S
HGBL02S
HGBL01S
HGBL10S
Single
0°
0.375” –
HGBL02SA
HGBL01SA
HGBL10SA
Double D
0°
0.250” 0.625”
HGBL06D
HGBL04D
HGBL02D
HGBL01D
HGBL10D
Double DA
0°
0.250” 0.750”
HGBL06DA
HGBL04DA
HGBL02DA
HGBL01DA
HGBL10DA
HGBL20DA HGBL30DA
HGBL01DB
HGBL10DB
HGBL20DB HGBL30DB
Double DB
0°
0.375” 1.000”
HGBL06DB
HGBL04DB
HGBL02DB
Single
45
0.250” –
HGBL06SF
HGBL04SF
HGBL02SF
45°
0.250” 0.625”
HGBL06D45
HGBL04D45
HGBL02D45
Double DN 90°
0.250” 0.625”
HGBL06D90
HGBL04D90
HGBL02D90
Double
0.375” 1.000”
SF
Double DF
90°
HGBL20SA HGBL30SA
HGBL20D
HGBL10D45
HGBL10D90
HGBL06DB90 HGBL04DB90 HGBL02DB90
HGBL10DB90
Die Index
HU Series
7
HU5CRT
8
HU4CRT
10
HU2CRT
11
HU1CRT
12
HU25RT
13
HU26RT
14
HU27RT
HW Series
HW5CRT
HW4CRT
HW2CRT
HW1CRT
HW25RT
HW26RT
HW27RT
HX Series
HX5CRT
HX4CRT
HX2CRT
HX1CRT
HX25RT
HX26RT
HX27RT
(2)
(2)
(2)
(4)
(4)
(4)
(4)
4/0
10
250kcmil
5
300kcmil
5
350kcmil
5
500kcmil
5
6000kcmil
5
750kcmil
5
Purple
Yellow
White
Red
Brown
Green
Black
HGBL40DB
HGBL250DB
HGBL300DB
HGBL350DB
HGBL500DB
Dieless
Large Lugs
A
90˚
45˚
S
H
Style
Double
A=
Angle
0°
H=
Hole
0.375”
Pkg Qty
Barrel
Color
S=
Spacing
1.0”
Die Index
HU Series
15
16
17
18
20
22
24
HU28RT
HU29RT
HU30RT
HU31RT
HU34RT
HU36RT
HU39RT
HW Series
HW28VT
HW29VT
HW30VT
HW31VT
HW34VT
–
–
(2)
–
–
–
–
–
–
Dieless
0.25” Hole
0.625” Spacing
Actual Size:
®
Premise Wiring
HGBL600DB HGBL750DB
0.25” Hole
0.75” Spacing
6
0.375”Hole
1.0” Spacing
Busbars
• Rack Ground Busbar (RGB)
• Telecommunications Grounding Busbar (TGB)
• Telecommunications Main Grounding Busbar (TMGB)
• TGB and TMGB include insulators and assembly hardware
Busbars
Hole
Total
Diameter Spacing Qty
Double
Lug
Qty
6-32 UNF
1.0”
8
4
0.25”
0.75”
4
2
0.625” 16
8
¼-20
HBBBVR36KT*
0.75” W x 36” L x 0.25” D,
insulators, mounting
hardware, lug mounting
hardware.
5/16-18
stud
1.0”
2
1
HBBBVR76KT*
(2) 0.75” W x 36” L
x 0.25” D busbars,
8” braided jumper,
insulators, (4) brackets,
mounting hardware,
lug mounting hardware.
¼-20
0.625” 16
8
HBBB14210A*
2” W x 10” L x 0.25” D
0.25”
0.625” 16
8
HBBB14224B*
2” W x 24” L x 0.25” D
0.25”
0.625” 18
9
0.25”
0.75”
9
HBBB14416G*
4” W x 16” L x 0.25” D
0.44”
0.75”
8
–
0.44”
1.0”
16
8
HBBB14416H*
4” W x 16” L x 0.25” D
0.44”
1.0”
16
8
0.25”
0.75”
16
8
HBBB14420J*
4” W x 20” L x 0.25” D
0.44”
1.0”
34
17
0.25”
0.75”
34
17
TMGB
TGB
RGB
Catalog No./
Description
HBBBHR19KT*
0.75” W x 19” L x 0.25” D,
insulators, mounting
hardware, lug mounting
hardware.
For all connections to busbars, oxidation must be scrubbed away and the application of an antioxidant is required.
*Add “TP” at the end of any busbar Catalog No. for 99% Copper Tin Plated.
7
18
Irreversible Connectors
Irreversible Busbar and I-Beam Connectors provide a high level of
bonding security and are as permanent as welding.
Typical Busbar Connector Applications
• TGB to GE
• TGB to TBB
• TGB to beam steel
• TGB to TGB
• TGB to mesh BN
Busbar Connectors
Catalog No.
Quantity
Dimensions
Wire 1
Wire 2
Die
HYG14B2TC2C6C
1
1.5” x 1.37” x 0.81”
#2AWG
#6AWG
HU1105
HYG14B2TC2C2C
1
1.5” x 1.37” x 0.81”
#2AWG
#2AWG
HU1105
HYG14BTC28
1
1.5” x 1.37” x 0.81”
4/0 –1/0AWG
–
HU1105
HYG14BTC26
1
1.5” x 1.37” x 0.81”
#2 –2/0AWG
–
HU1105
Note: Individually packaged, Penetrox applied, compatible with 0.25” thick busbars.
Typical I-Beam Connector Applications
• Steel beam to TBB
• Steel beam to TGB
• Steel beam to TMGB
I-Beam Connectors
Catalog No.
Quantity
Steel Flange
Flange I Range
Die
HYGIBS338
1
Standard
0.250” – 0.338”
HU1105
HYGIBS400
1
0.338” – 0.400”
HU1105
HYGIBS462
1
0.400” – 0.462”
HU1105
0.462” – 0.500”
HU1105
0.250” – 0.338”
HU1105
0.338” – 0.400”
HU1105
0.400” – 0.462”
HU1105
0.462” – 0.500”
HU1105
HYGIBS550
1
HYGIBW338
1
HYGIBW400
1
HYGIBW462
1
HYGIBW550
STANDARD BEAMS
(FLANGE ANGLED)
Wide
WIDE FLANGE BEAMS
(FLANGE PARALLEL)
1
Note: Includes heavy duty lug mounting hardware: (2) 0.42” threaded studs, (2) flat washers, (2) lock washers, (2) hex nuts.
Hole spacing for heavy duty HYGHA lugs.
Heavy Duty Lugs
Catalog No.
Quantity
Conductor Size
Hole Size
Spacing
Die Index
Die
HYGHA02
1
2AWG
0.56”
1.75”
11
HU1CRT
HYGHA25
1
1/0AWG
0.56”
1.75”
14
HU27RT
HYGHA26
1
2/0AWG
0.56”
1.75”
15
HU28RT
HYGHA27
1
3/0AWG
0.56”
1.75”
16
HU29RT (2)
Note: Individually packaged, Penetrox filled, compatible with HYGIB I-beam connectors.
®
Premise Wiring
8
Compression Taps
Thin Wall C-Taps
Catalog No.
HYC4L12
Qty
25
Run-Tap
Stranded
6-6
Run-Tap
Stranded
Run-Tap
Stranded
Color
Length Code
1.18”
Brown
No. Die
Ribs Index HW Series
1
10
HW2CVT(2)
HU Series
HUC4
HYC2L12
25
4-4
2-6
1.18”
Pink
1
12
HW25VT (2)
HUC2
HYC1L12
10
2-4
1-6
1.75”
Black
2
13
HW26VT (2)
HUC1
HYC25L12
10
2-2
1-4
1/0-4
1.75”
Orange
2
14
HW27VT(3)
HU25
HYC26L12
5
1-1
1/0-2
2/0-2
1.75”
Purple
2
15
HW28VT(3)
HU26
HYC27L12
5
1/0-1/0
2/0-2
3/0-2
1.75”
Yellow
2
16
HW29VT(3)
Direct Burial C-Taps
Catalog No.
HYC4C6
Run-Tap
Qty Stranded
10 6-6
Run-Tap
Stranded
4-6
HYC4C4
10
4-4
HYC2C4
10
2-4
HYC2C2
10
2-2
HYC26C2
5
2/0-6
HYC26C26
5
2/0-2/0
HYC28C2
1
4/0-6
HYC28C26
1
4/0-2/0
HYC28C28
1
4/0-4/0
Run-Tap
Stranded
Length
0.625”
Die
Index
BG
HW Series
HWBG (2)
HU Series
HUBG (2)
4-6
0.625”
BG
HWBG (2)
HUBG (2)
2-6
0.75”
C
HWCC (2)
HUC (2)
0.75”
C
HWCC (2)
HUC (2)
0.875”
0
–
HU0
0.875”
0
–
HU0
1.07”
D3
–
HUD3
1.07”
D3
–
HUD3
1.07”
D3
–
HUD3
2/0-4
2/0-2
4/0-4
4/0-2
H-Taps
Catalog No.
HYH6C6C
Run-Tap
Qty Stranded
1
6-6
Run-Tap
Stranded
HYH2C2C
1
2-2,4,6
4-4,6
HYH292C
1
4/0-2,6
2/0-2,6
Run-Tap
Stranded
Color
Die
Length Code
Index HW Series
0.6”
Orange BG
HWBG
0.75”
Brown
C
HWCC
HUC
1/0-2,6
0.9”
Purple
654
–
HU654
HU Series
HUBG
HYH2929
1
4/0-4/0,2
3/0-3/0,2
2/0-2/0,2
0.9”
Purple
654
–
HU654
HYH3429
1
500-250,1/0
350-250,1/0
4/0-1/0
1.0
Brown
1104
–
HU1104
HYH3434
1
500-500,4/0
350-350,4/0
1.0
Brown
1104
–
HU1104
HYH3931
1
750-4/0,1/0
650-4/0,1/0
500-4/0,1/0
0.95
Yellow
K-R
–
HUKR
HYH3939
1
750-750,350
650-650,350
500-350
1.25
Yellow
K-R
–
HUKR
H-Taps with Clear Cover
Catalog No.
HYH2CWC
Run-Tap
Qty Stranded
1
2-2,4,6
Run-Tap
Stranded
4-4,6
Run-Tap
Stranded
Color
Length Code
0.75”
Brown
Die
Index HW Series
C
HWCC
HU Series
HUC
HYH29WC
1
4/0-2,6
2/0-2,6
1/0-2,6
0.9”
Purple
654
–
HU654
4/0-4/0,2
3/0-3/0,2
2/0-2/0,2
0.9”
Purple
654
–
HU654
HYH2929WC 1
H-Tap Covers
Clear Cover
HCCFBGFR
Black Cover
HCFBGFR
Qty
1
H-Tap Size
HYH6Cxx
Color Code
Orange
HCCFOFR
HCFOFR
1
HYH2Cxx
Brown
HCCFDFR
HCFDFR
1
HYH29xx
Purple
HCCFN
HCFN
1
HYH34xx
Brown
HCCFR
HCFR
1
HYH39xx
Yellow
9
Clamps
Grid
Parallel (Serpentine)
Parallel (Direct)
Raised Floor Pedestal Clamps
Catalog No.
Pedestal
Wire Range
Configuration
Hardware
Install Torque
HGBGXP1828RF
0.75”-1.5”
Square
6 – 4/0AWG
Grid or Parallel
Stainless Steel
1/2”
120in-lb Conductor
180in-lb Clamp
0.75”-1.875”
Round
HGBGP1526G1
1.0”-1.25”
Round
4 – 2/0AWG
Parallel
Silicon Bronze
9/16”
240in-lb
HGBGRF4C3
0.75”-1.0”
Round or
Square
8 – 2AWG
Parallel
Silicon Bronze
9/16”
240in-lb
Note: Torque values may differ based on the Grounding and Bonding Standard selected.
The Mesh Bonding Network shall have a support attached at a maximum of 3’ (36”) intervals.
Pipe Clamps
Catalog No.
I.P.S. Pipe
Diameter
Height
Width
Conductor Range
U-Bolt
Size
Nut Size
HGBGAR1526
1.0”
2-7/8”
2-5/8”
4AWG-2/0AWG
3/8”
9/16”
HGBGAR1726
1.5”
3-1/2”
3”
4AWG-2/0AWG
3/8”
9/16”
HGBGAR1826
2.0”
4”
3-1/4”
4AWG-2/0AWG
3/8”
9/16”
HGBGAR1926
2.5”
4-1/4”
3-3/4”
4AWG-2/0AWG
3/8”
9/16”
HGBGAR2026
3.0”
5”
4-1/4”
4AWG-2/0AWG
3/8”
9/16”
HGBGAR2126
3.5”
5-5/8”
4-3/4”
4AWG-2/0AWG
3/8”
9/16”
HGBGAR2226
4.0”
6-1/4”
5-3/8”
4AWG-2/0AWG
3/8”
9/16”
HGBGAR2426
5.0”
6-3/8”
5-7/8”
4AWG-2/0AWG
3/8”
9/16”
HGBGAR8629
6.0”
8-13/16”
8-3/8”
2AWG-250kcmil
1/2”
3/4”
Note: All pipe clamps secure the grounding conductor to the pipe in a parallel or perpendicular manner.
®
Premise Wiring
10
Mechanical Connectors
Terminals
Catalog No.
HGBKA6U
Qty
100
Minimum
14AWG
Maximum
6AWG
Material
Aluminum
Mount Hole
Diameter
0.25”
Torque
(in lb)
45
HGBBGBL4
100
14AWG
4AWG
Aluminum
0.22”
35
HGBKLU35
100
14AWG
6AWG
Copper
0.19”
45
HGBCL501
100
14AWG
4AWG
Copper
0.22”
35
Minimum
14AWG
Maximum
2/0
Material
Aluminum
Mount Hole
Diameter
0.31”
Hole
Spacing
0.625”
On-Rail Terminal
Catalog No.
HGBKARB
Qty
1
Split Bolt Connectors
STR Max
Run and
Tap
6AWG
SOL Max
Run and
Tap
6AWG
Material
Copper
Bolt
Size
7/16”
Length
1.14”
Torque
(in lb)
165
Catalog No.
HGBKS17
Qty
50
STR Min
Run and
Tap
8AWG
HGBKS20
50
8AWG
4AWG
4AWG
Copper
1/2”
1.20”
165
HGBKS22
50
6AWG
3AWG
2AWG
Copper
19/32”
1.50”
275
HGBKS23
25
6AWG
2AWG
1AWG
Copper
5/8”
1.54”
275
HGBKS25
25
4AWG
1/0AWG
2/0AWG
Copper
3/4”
1.77”
385
HGBKS26
10
2AWG
2/0AWG
3/0AWG
Copper
7/8”
1.94”
385
HGBKS27
10
1AWG
3/0AWG
4/0AWG
Copper
1 1/8”
1.86”
500
HGBKS29
5
1AWG
250Kcmil
4/0AWG
Copper
1 1/8”
2.07”
650
Split Bolt Covers
Catalog No.
HGBSC4
Qty
1
Size
Minimum
HGBKS17
Size
Maximum
HGBKS20
Color
Black
HGBSC2
1
HGBKS22
HGBKS23
Black
HGBSC20
1
HGBKS25
HGBKS26
Black
ShieldBond Connector
Catalog No.
BC285SB100
Qty
100
Description
ShieldBond connector kits for cable jackets. Each kit includes brass screw and nut,
(2) retaining washers, (1) gripping. Install tool included.
11
Tools
Tooling Capability
Tool
Capability
HY750CHSXT
HPAT750LI
Beam & Busbar
Connector
HMRC840
HOUR840
HMD7
•
•
C-Tap & H-Tap
3/0AWG
•
•
C-Tap & H-Tap
Up to 2AWG
HPAT600LI
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Work/Effort
Standard
Standard
Standard
Easy
Involved
Easy
Speed
Average
Average
Average
Fast
Involved
Fastest
C-Tap & H-Tap
Up to 4AWG
Lug
Tools, W- and X-Dies
Tools Require Lugs or Taps
Catalog No.
Description
Lugs
HPAT600LI
6-ton automatic compression
tool, 18V lithium powered,
carrying case, lanyard,
(2) lithium batteries,
(1) charging station
HMD7
9000lb manual compression
tool, built-in BG die, handle
length 25”
HW5CRT
HW4CRT
HW2CRT
HW1CRT
HW25RT
HW26RT
HW27RT
HW28VT
HW29VT
HW30VT
HW31VT
HW34VT
Die
6AWG
4AWG
2AWG
1AWG
1/0AWG
2/0AWG
3/0AWG
4/0AWG
250kcmil
300kcmil
350kcmil
400kcmil
Taps
HWCC
HWO
HW28K
HWBG
HW2CVT
HW25VT
HW26VT
HW27VT
HW28VT
HW29VT
Die
C
0
CUTOFF
BG
10
12
13
14
15
16
Tools, W- and X-Dies
Tool Requires Lugs or Taps
Catalog No.
Description
Lugs
HOUR840
8000lb manual compression
tool, hand ratcheting forward
cycle until max capacity reset,
metal carrying case with
die holders
HX5CRT
HX4CRT
HX2CRT
HX1CRT
HX25RT
HX26RT
HX27RT
Die
#6AWG
#4AWG
#2AWG
#1AWG
#1/0AWG
#2/0AWG
#3/0AWG
Taps
HXBG
Die
BG
Tools and U-Dies
Tools Require Lugs or Taps
Catalog No.
Description
HPAT750LI
12 ton automatic compression
tool, 18V lithium powered,
carrying case, lanyard,
(2) lithium batteries,
(1) charging station
Lugs
HU5CRT
HU4CRT
HU2CRT
HU1CRT
HU25RT
HU26RT
HU27RT
HU28RT
HY750CHSXT 12 ton manual hydraulic
compression tool, carrying case, HU29RT
HU30RT
handle length 24”
HU31RT
HU34RT
HU36RT
HU39RT
®
Premise Wiring
Die
#6AWG
#4AWG
#2AWG
#1AWG
#1/0AWG
#2/0AWG
#3/0AWG
4/0AWG
250kcmil
300kcmil
350kcmil
400kcmil
500kcmil
750kcmil
12
Taps
HU1105
HU1104
HU654
HU997
HUC4
HUC2
HUC1
HUC25
HUC
HU0
HUBG
HUC25
Die
1105
1104
654
997
C4
C2
C1
C25
C
0
BG
26
Tools
Integrated Die Tool
Die Information
Catalog No.
Description
HU Series
9 pt. font size
HMRC840
Manual compression tool, dies for
#6AWG to 4/0AWG are integrated
into the head, color coded dies
unlock and can be rotated to lug
barrel size; 26” leveraged handles
HW Series
9 pt. font size
HX Series
9 pt. font size
HMRC840
7 pt. font size
Torque Wrenches
Catalog No.
Description
HBT30150
30-150in-lb torque wrench, carrying
case, certification calibration
HBT150750
150-750in-lb torque wrench,
carrying case, certification calibration
Die Tree and Case
Catalog No.
Description
HWDIETREE
Die tree for use with HW and HX dies;
Holds 6 sets
HWDIECASE
Die case for use with HW and HX dies;
Holds 12 sets
HUDIECASE
Die case for HU dies;
Holds 15 sets
Tooling Best Practices
HPAT600LI
and
HPAT750LI
Lugs:
Insert and align lug in the stationary die. Press and hold forward button until
pressure release resets, use reverse button to draw back die.
C-Tap and H-Tap:
Use VELCRO®, string or a plastic cable tie to hold wires in place while
applying pressure.
HMRC840
and
HMD7
Lugs:
Insert and align lug in dies, gently close handles to put a light hold on the lug
before inserting the stripped copper wire into the lug. By holding the lug vertically
(barrel up), gravity will keep the ground wire in place while applying pressure.
C-Tap:
Use VELCRO®, string or a plastic cable tie to hold wires in place while
applying pressure.
HOUR840
Lugs:
Insert and Align lug in dies, gently squeeze handles a few times to put a light
hold on the lug before inserting the stripped copper wire into the Lug.
VELCRO® is a registered trademark of Velcro Industries B.V.
13
Accessories
Installation Accessories
Catalog No.
Description
HGBESDKT10
Qty
Catalog No.
Description
Qty
ESD port for 4mm banana plug; 10
0.5oz Penetrox; ESD Label;
(2) #12-24 TFS;
(2) M6 stainless TFS
HGBESDBC
ESD cloth bracelet; 6ft cord;
4mm banana plug
1
HGB25CNWH
1/4” belleville washer
50
HGBESDBM
ESD metal bracelet; 6ft cord;
4mm banana plug
1
HGB38CNWH
3/8” belleville washer
50
HGB025DBS
3/16” drill bit for steel
material and 1/4” thread
forming screw
1
HGB1224ST
#12-24 x 3/4” stainless
steel screws
50
HGBCWB2
Wire brush for power drill
1
HGBM6ST
M6 x 16mm stainless
steel screws
50
HGB24AP
2” x 4” abrasive pad
6
HGBESDLBL
ESD label
25
HGBP8A
8oz bottle Penetrox
1
ESD
HGBGNDLBL
Ground label
25
HGRKTLBL
Ground wire label
25
IF THIS CONNECTOR OR CABLE
IS LOOSE OR MUST BE REMOVED,
PLEASE CALL THE BUILDING
TELECOMMUNICATIONS MANAGER
HPENEA0550 0.5oz tube Penetrox
50
HGB25PPW
50
Serrated paint
piercing washer
Braided Jumper
Catalog No.
Qty
Length
Width
Hole Size
Hole Spacing
HGBBD6S10
10
6”
0.5”
1/4”
–
HGBBD9S10
10
9”
0.5”
1/4”
–
HGBBD12
1
12”
0.94”
3/8”
1.25”
HGBBD18
1
18”
0.94”
3/8”
1.25”
HGBBD24
1
24”
0.94”
3/8”
1.25”
QUADCAB® Wall Mount Cabinet Ground Kit
Catalog No.
Description
REKGB
Ground bar with (6) ¼”-20 male studs
(2) ¼”-20 carriage bolts and isolating hardware
(2) ground straps
(6) ¼”-20 nuts with star washers
Specification text available. Contact your local sales representative.
®
Premise Wiring
14
Accessories
Installation Accessories
Catalog No.
Description
Qty
HGBTEBCBRKL10
TEBC bracket for ladder rack,
aluminum painted black
10
HGBTEBCBRKW10
TEBC bracket for wire tray,
aluminum painted black
10
Insulated Halo Bracket
Catalog No.
Description
Qty
HGBSETH
Stainless steel bracket, insulator, UV Rated
cable holding clips for 0.25”, 0.31”, 0.38”,
0.50”, 0.56”, 0.75” and 0.88” cables
1
Ladder & Tray Kits
Ladder Tray Bonding Jumper Kits
Catalog No.
Description
Connector
HGRKTKA9KA5
Contents:
• (10) connectors
• (5) #6 AWG conductors 9”
• (10) hardware for securing
• Labels for each conductor
Parallel
Aluminum
HGRKTKLU9KLU5
Contents:
• (10) connectors
• (5) #6 AWG conductors 9”
• (10) hardware for securing
• Labels for each conductor
Standoff
Copper
Wire Basket Tray Bonding Jumper Kits
Catalog No.
Description
Connector
HGRKTWC45
Contents:
• (10) Connectors
• (5) #6 AWG Conductors 9”
• Labels for each conductor
C-Tap
(Requires
BG die)
HGRKTWB5
Contents:
• (10) Connectors
• (5) #6 AWG Conductors 9”
• Labels for each conductor
Split Bolt
15
®
Premise Wiring
Grounding and Bonding
www.hubbell-premise.com
Hubbell Premise Wiring
Your complete online resource
Find what you need quickly with our multi-functional
online value-added tools. Print, zoom, search and
download required information anytime, anywhere.
Visit www.hubbell-premise.com.
Hubbell Premise Wiring
Catalog
Data Center Brochure
Hubbell Installation
Efficiency Guide
®
Premise Wiring
www.hubbell-premise.com
Hubbell Premise Wiring • Hubbell Incorporated (Delaware) • 23 Clara Drive • Suite 103 • Mystic, CT 06355 • Phone (800) 626-0005 • FAX (860) 535-8328
Printed in U.S.A. Specifications subject to change without notice.
®
is a registered trademark of Hubbell Incorporated. PLBM002R2 10/15
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement