SOLIX Quick Start Guide
SOLIX_QSG_532549-1EN_C.qxp_Layout 6 7/31/17 7:55 AM Page 1
SOLIX®
QUICK START GUIDE
Power On/Off
Tap the top, right corner of the status bar.
Select Power Off.
Press and hold the POWER
key to power on/off.
NOTE: Press the POWER key once to open the Power X-Press Menu™. Use the Power
X-Press Menu to adjust the screen brightness, turn on/off night mode, etc.
Open the Home Screen
With a view displayed on-screen, swipe down.
Press the HOME key.
NOTE: To return to the previous view, swipe down with two fingers again.
1
532549-1_C
SOLIX_QSG_532549-1EN_B.qxp_Layout 6 3/21/17 12:05 PM Page 2
The Home Screen
Ad
The Home screen is the main control center for your control head. Use the Home
screen to access the control head settings, alarms, favorite views, and tools. The
tools available on the Home screen are determined by the equipment attached to
the control head network.
Drag
status
bar
main
menus
Cl
favorite
views
tools
bar
OR
Swipe Left or Right
Use the Joystick
Ti
Select a Tool, View, or Menu
The
Use the touch screen, Joystick, or the ENTER key to make selections.
OR
Tap to Select
Select
2
Open
Ta
M
Me
ome
The
d to
SOLIX_QSG_532549-1EN_B.qxp_Layout 6 3/21/17 12:05 PM Page 3
Adjust a Menu Setting
Drag the slider, or press and hold the slider.
Turn the Rotary dial, or press
and hold the ENTER key.
atus
r
ain
enus
vorite
ws
Close a Menu
Tap the Back icon to go back one level.
Tap the X icon to close a menu.
Press the EXIT key to close a
menu or go back one level.
Press and hold the EXIT key
to close all menus.
ols
r
Tips for Using the Status Bar
The status bar is located at the top of the screen.
touch menus change to match
the on-screen view and status
Tap the view name or press the
MENU key to open the X-Press
Menu for the on-screen view.
sensor status
Tap the status bar or press the
POWER key to open the Power
X-Press Menu.
3
SOLIX_QSG_532549-1EN_B.qxp_Layout 6 3/21/17 12:05 PM Page 4
Display a View
Ed
Use the touch screen or the Joystick to open a view from the Favorites bar or the
Views tool.
The
and
1.
Use the Views tool
or Favorites bar
to display a view.
2.
Display the Next/Previous View
Swipe the screen with two fingers to change the on-screen view.
Or press the Rotary dial and select a view.
T
Swipe Left or Right
4
r the
SOLIX_QSG_532549-1EN_B.qxp_Layout 6 3/21/17 12:05 PM Page 5
Edit the On-Screen View (X-Press Menu)
The X-Press Menu displays menu options for the on-screen view, the selected pane,
and the operation mode.
1. Single-Pane View: Tap the view name in the status bar, or press the MENU key.
Multi-Pane View: Tap a pane, or press the PANE key to select a pane. Press the
MENU key.
2. Select (Pane Name) Options > Preferences to change the appearance of the view.
Select (Pane Name) Options > Overlays to display or hide information on the view.
X-Press
Menu
selected pane
outlined in yellow
2
1
3
Using the X-Press Menu
Swipe with one finger
up/down or move the
Joystick to scroll through
the menu list.
OR
Tap to Select a Pane
and the Menu
Press the PANE key
to Select a Pane
5
Press the MENU key
SOLIX_QSG_532549-1EN_B.qxp_Layout 6 3/21/17 12:05 PM Page 6
Activate the Cursor
Se
Tap a position on the view, or move the Joystick.
To open the Cursor menu, press and hold a position.
Whe
impo
know
man
1.
2.
3.
4.
Cursor Menu
Use the Cursor menu to
mark a waypoint, create
a route, open the Go To
menu, or start a search.
Zoom In/Zoom Out
Pinch out to zoom in, pinch in to zoom out, or press the +/- ZOOM keys.
T
Pres
adj
6
SOLIX_QSG_532549-1EN_B.qxp_Layout 6 3/21/17 12:05 PM Page 7
Set Up Humminbird® LakeMaster®: Set the Water Level Offset
When you start your trip for the day using a Humminbird LakeMaster map card, it is
important to note if the water level is higher or lower than usual. For example, if you
know the lake is down 3 feet, set the Water Level Offset to -3. See your operations
manual for details.
1. With a Chart View displayed on-screen, tap Chart in the status bar, or press the
MENU key once.
2. Select Water Level Offset.
3. Tap the on/off button, or press the ENTER key, to turn it on.
4. Press and hold the slider, or turn the Rotary dial, to adjust the setting.
NOTE: A Humminbird LakeMaster map card must be installed and selected as
the chart source to enable this feature.
Water Level Offset
The water level offset will
be highlighted in brown to
extend the land visually
on the display.
1
2
OR
Tap to select a menu.
Press and drag the slider to
adjust the menu setting.
Press the MENU key
Turn the Rotary dial to
adjust the menu setting.
NOTE: To apply depth colors, depth highlight range, etc., go to the Chart X-Press
Menu > Humminbird Settings. See your operations manual for details.
7
SOLIX_QSG_532549-1EN_B.qxp_Layout 6 3/21/17 12:05 PM Page 8
Mark Waypoints
St
Open the Mark Menu and select Waypoint, or press the MARK key twice.
1.
If the cursor is not active, the waypoint will be marked at the boat position. If the
cursor is active, the waypoint will be marked at the cursor position.
2.
3.
4.
5.
Activate Man Overboard Navigation
As soon as you know you have a man overboard, press and hold the
MARK/MAN OVERBOARD key. See your operations manual for details.
Man Overboard Navigation
Man Overboard navigation marks
the approximate point where the
person went overboard and starts
continuous navigation toward the
Man Overboard waypoint.
8
f the
SOLIX_QSG_532549-1EN_B.qxp_Layout 6 3/21/17 12:05 PM Page 9
Start Quick Route Navigation (touch screen)
1. Open the Cursor Menu: Press and hold a position on the chart.
2. Select Go To.
3. Select Quick Route.
4. Tap the chart in the positions where you want to mark a route point.
Undo Last Route Point: Tap the Back icon.
Cancel Route Creation: Tap the X icon.
5. To start navigation, tap the check icon in the status bar.
Cancel Navigation: Tap Chart in the status bar. Select Go To > Cancel Navigation.
Tap to Mark
Route Points
9
SOLIX_QSG_532549-1EN_B.qxp_Layout 6 3/21/17 12:05 PM Page 10
Start Quick Route Navigation (keypad)
1. Press the GO TO key.
2. Select Quick Route.
3. Use the Joystick to move the cursor to a position or waypoint. Press the
Joystick to mark the first route point.
4. Repeat step 3 to connect more than one route point.
Undo Last Route Point: Press the EXIT key once.
Cancel Route Creation: Press and hold the EXIT key.
5. To start navigation, press the ENTER key.
Cancel Navigation: Press the GO TO key. Select Cancel Navigation.
route
point
cursor
marking
a route
point
Open Go To Menu
Move Cursor Position
Mark Route Points
10
Start Navigation
SOLIX_QSG_532549-1EN_B.qxp_Layout 6 3/21/17 12:05 PM Page 11
Key
Key Functions
Press the POWER key to power on the control head. Press and hold
the power key to power off.
the
Press the ENTER key to start a command or turn on a setting. The
ENTER key also opens the Info menu and the Cursor menu.
Press the EXIT key once to close a menu, close a dialog box, turn off an
alarm, or exit Cursor mode. Press and hold the EXIT key to close all
menus at once.
Move the Joystick to select a view, tool, or menu. Press the Joystick to
open your selection. The Joystick is also used to move the cursor
across the view and pan 2D/3D chart views.
Turn the Rotary dial to adjust menu settings. With a view displayed
on-screen, press the Rotary dial to select a view to display.
GO TO/Screen Snapshot key: Press this key once to open the Go To
menu for navigation functions. Press and hold this key to save the
screen image.
Press the PANE key to open the View Options menu or to select a pane
in a multi-pane view.
MARK/MAN OVERBOARD key: Press and hold this key to start Man
Overboard Navigation. To mark waypoints, press this key twice.
Press the HOME key to display the Home screen. The Home screen
allows you to access settings, alarms, views, and tools for the control
head.
For a closer view, press the ZOOM IN (+) key. For a wider view, press the
ZOOM OUT (-) key. Press and hold the ZOOM OUT (–) key to zoom out
all the way.
MENU key: To open the X-Press Menu for the on-screen view and
operation mode, press the MENU key once. To open the Main Menu
(Settings tool), press the MENU key twice.
© 2017 Johnson Outdoors Marine Electronics, Inc. All rights reserved.
11
SOLIX_QSG_532549-1EN_B.qxp_Layout 6 3/21/17 12:05 PM Page 12
Contact Humminbird Customer Service
Contact Humminbird Customer Service in any of the following ways:
Toll Free: (800) 633-1468
International: (334) 687-6613
E-mail: [email protected]
Shipping: Humminbird
Service Department
678 Humminbird Lane
Eufaula, AL 36027 USA
Our Web site, humminbird.com, offers in-depth information about all
things Humminbird, along with technical support, product manuals,
software updates, and a robust FAQ section.
For more great content, visit:
Facebook.com/HumminbirdElectronics
Twitter.com (@humminbirdfish)
YouTube.com/humminbirdtv
12
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement