TECS_BB_010.2 RX MFSHL-DC16-HS1

TECS_BB_010.2 RX MFSHL-DC16-HS1
Technical Sales Sheet
Receiver: RX MFSHL-DC16 2.4 GHz
Housing:
Impact resistant polymer composite
Weight:
Up to 710 g (1.6 lbs)
Dimensions:
Height: 131 mm (5.16 in) not including antenna
Width: 166 mm (6.54 in)
Depth: 88 mm (4.46 in) including vibration mounts
Environmental Protection:
IP 65 (Exceeds Nema 12/13)
Antenna:
External via reverse polarity TNC connector
Power Supply:
12/24 VDC +/- 50%
Inputs:
4 Programmable digital inputs at 12/24V
4 Programmable analog inputs (at 0-10 VDC or 0-20 mA)
1 Cable backup via reverse polarity TNC connector
Outputs:
2 Programmable PWM outputs at 4A
1 MC digital output at 20 A maximum load
12 Programmable digital outputs at 5 A supplied by MC output
4 Programmable digital outputs at 5 A supplied externally supplied
1 +5 VDC, 300 mA e-fused supply output
Diagnostics:
External LEDs, power/operation, TX signal reception, MC error
Frequency:
2.4 GHz
Typical Operating Range:
Approximately 30m (100 ft.) line of sight
Safety:
20-bit address scheme with up to 1 million possibilities
Active and passive stop function
Parity and checksum
Designed to Cat 3 PLd
Temperature Range:
-25o C . . . +70o C (-13o F . . . +158o F)
Humidity Range:
0 - 97% maximum non-condensing
Response Time:
Less than 100 msec
Standard Features:
Fully programmable via H-Link
Built-in quick disconnect connector
Cable backup ready
Vibration mounts
TECS_BB_010.2
07-02-2012
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement