advertisement
▼
Scroll to page 2
of 54
User’s Guide 5" Portable Digital Video Baby Monitor With Wi-Fi® Models: MBP855CONNECT, MBP855CONNECT-2, MBP855CONNECT-3, MBP855CONNECT-4 The features described in this User’s Guide are subject to modifications without prior notice. Welcome... to your new Motorola Digital Video Baby Monitor! Thank you for purchasing the Digital Video Baby Monitor. Now you can see and hear your baby sleeping in another room or you can monitor your older children in their play room. Please retain your original dated sales receipt for your records. For warranty service of your Motorola product, you will need to provide a copy of your dated sales receipt to confirm warranty status. Registration is not required for warranty coverage. For product-related questions, please call: +44 (0) 844 557 0890 (UK only)* *Calls cost 7p per minute plus your telephone company's access charge +44 (0) 8187 62092 (ROI) On the Web: www.motorolahome.com This User's Guide provides you with all the information you need to get the most from your product. Before you use the Digital Video Baby Monitor, we recommend that you insert and fully charge the battery in the Parent Unit, so that it continues to work if you disconnect it from the power supply. Please read the Safety Instructions on pages 8 - 10 before you install the Units. Got everything? • 1 x Parent Unit • 1 x Baby Unit (Camera) • 1 x Power adapter for Parent Unit • 1 x Power adapter for Baby Unit • 1 x Stargrip In multi-camera packs, you will find one or more additional Camera Units with power adapters. Overview of the Parent Unit 1 12 13 14 15 16 17 2 7 3 8 4 9 5 10 6 11 Display (LCD screen) VIDEO ON/OFF button V Press to turn the LCD screen ON/ OFF. 3. TALK button T Press and hold to speak to your baby. 4. RESET button (recessed - use small pin) 5. UP button + Normal Mode: Tilt camera Up Menu Mode: Move Up menu options 6. DOWN button Normal Mode: Tilt camera Down Menu Mode: Move Down menu options 7. MENU button M Press to open / close the Menu options 8. OK button O 9. Micro USB power adapter socket 10. LEFT button < Normal Mode: Pan camera Left Menu Mode: Move Left along menu options 1. 2. 11. RIGHT button > 12. 13. 14. 15. 16. 17. 18. 19. Normal Mode: Pan camera Right Menu Mode: Move Right along menu options Charging LED: Blue when mains power connected. Parent Unit ON/OFF LED (Green) Audio Level LEDs (Green, Amber, Red, Red) Volume buttons Press - / + to decrease/increase Volume level on Parent Unit Power button 0 Press and Hold to turn the Parent Unit ON/OFF Microphone Stand Speaker Parent Unit menu icons Signal Level Indication (5 Levels) Night Vision Mode (Video also changes to Black/White) T Talk Mode On Volume Level Indication (4 Levels) Panning Camera Left Panning Camera Right Tilting Camera Up Tilting Camera Down Zoom Level Control (1X, 2X) Brightness Level Control (8 Levels) Lullaby Control (5 Sound Selections) Alarm Setting (6h, 4h, 2h, OFF) On status bar, indicates alarm set, and when flashing, that alarm time has been reached or missed. Temperature scale select (oC / oF) Readings display in BLUE, but turn RED if > 29ºC / 84ºF, or < 14ºC / 57ºF Displays HH oC / oF if >36oC / 97oF. Displays LL oC / oF if < 1oC / 34oF. Camera Control (scan V Set Screen Off Timer (Off , view , add , delete + , 5 min, 30 min, 60 min) ) Indicates the screen off timer is set Volume Level Control (8 Levels) No Baby Unit detected View multiple cameras on screen. Available when you have more than 1 Baby Unit (Camera). Overview of Your Baby Unit 1. 2. 3. 4. 5. 6. Photo Sensor (Night Vision Mode) Camera Lens Infrared LEDs (x 8, for night vision) Power LED On when linked to Parent Unit Flashes when searching for Parent Unit Microphone Camera Battery LED On when AC power is connected to camera. Flashes when the battery level of the camera is low. 7. 8. 9. 10. 11. 12. 13. POWER ON/OFF switch Temperature Sensor Power Adapter Outlet PAIR Button Speaker Star Grip or Tripod Mount Antenna Important guidelines for installing your Baby Monitor • To use your Video Monitor Baby and Parent Units together, you must be able to establish a radio link between them, and the range will be affected by environmental conditions. • Any large metal object, like a refrigerator, a mirror, a filing cabinet, metallic doors or reinforced concrete between the Baby and Parent Unit may block the radio signal. • The signal strength may also be reduced by other solid structures, like walls, or by radio or electrical equipment, such as TVs, computers, cordless or mobile phones, fluorescent lights or dimmer switches. • Use of other 2.4 GHz products, such as wireless networks (Wi-Fi® routers), Bluetooth™ systems, or microwave ovens, may cause interference with this product, so keep the Baby Monitor away at least 1 metre from these types of products, or turn them off if they appear to be causing interference • If the signal is weak, try moving the Parent and/or the Baby Unit to different positions in the room(s). Table of contents 1. 2. Safety Instructions .................................................................................... 7 Getting Started....................................................................................... 10 2.1 2.2 2.3 3. Using the Baby Monitor .......................................................................... 14 3.1 3.2 3.3 3.4 3.5 3.6 4. 4.7 4.8 4.9 Volume ..................................................................................................... 16 Brightness ................................................................................................. 16 Lullaby ....................................................................................................... 16 Zoom ........................................................................................................ 16 Alarm ......................................................................................................... 16 Camera Control ....................................................................................... 17 4.6.1 Add (pair) a camera .................................................................. 17 4.6.2 View a camera ........................................................................... 17 4.6.3 Delete a camera ........................................................................ 18 4.6.4 Scan camera .............................................................................. 18 Temperature ............................................................................................ 18 Power Saving Mode.................................................................................. 19 View multiple cameras on screen ............................................................ 19 Wi-Fi® Internet Viewing ......................................................................... 20 5.1 5.2 5.3 5.4 6 Setting Up................................................................................................. 14 Pan and Tilt ............................................................................................... 14 Night Vision Mode .................................................................................... 14 Talk Mode ................................................................................................. 14 Video ON/OFF ........................................................................................ 14 Temperature Display (HH °C / °F or LL °C / °F) ..................................... 15 Parent Unit Menu Options ..................................................................... 16 4.1 4.2 4.3 4.4 4.5 4.6 5. Baby Unit Power Supply........................................................................... 10 Parent Unit Power Supply ........................................................................ 11 Registration (Pairing) ................................................................................ 13 Minimum System Requirements ............................................................. 20 Getting Started - Connecting Devices .................................................... 21 5.2.1 Setup ......................................................................................... 21 User Account and Camera Setup on Android™ Devices...................... 22 5.3.1 Power ON and Connect the Camera ....................................... 22 5.3.2 Download Hubble for Motorola Monitors App ........................ 22 5.3.3 Run Hubble for Motorola Monitors App on Android™ device ........................................................................................ 22 5.3.4 Add the Camera to your account ............................................ 23 User Account and Camera Setup on iPhone®/iPad® ............................ 26 5.4.1 Power ON and Connect the Camera ...................................... 26 Table of contents 5.6 5.7 6. 7. 8. 9. 10. Disposal of the Device (Environment) ................................................... 36 Cleaning .................................................................................................. 37 Help ......................................................................................................... 38 General Information ............................................................................... 46 Technical Specifications ......................................................................... 51 Table of contents 7 ENGLISH 5.5 5.4.2 Download Hubble for Motorola Monitors App ........................ 26 5.4.3 Run Hubble for Motorola Monitors App on iPhone®/iPad® ... 26 5.4.4 Add the Camera to your account ............................................. 27 Camera Functions: ................................................................................... 32 5.5.1 Connecting the Camera Unit to power ................................... 32 5.5.2 Overview of the Features on Hubble App ............................... 32 Working with PC/Notebook.................................................................... 35 Procedure for Resetting the Camera ...................................................... 35 1. Safety Instructions WARNING: Strangulation Hazard: Children have STRANGLED in cords. Keep this cord out of the reach of children (more than 1m (3ft) away). Never use extension cords with AC Adapters. Only use the AC Adapters provided. 8 Safety Instructions ENGLISH CAMERA SET UP & USE: • Choose a location for the Baby Unit that will provide the best view of your baby in their cot. • Place the Baby Unit on a flat surface, such as a dresser, desk, or shelf or mount the Unit to a wall securely using the keyhole slots on the underside of the stand. • NEVER place the Baby Unit or cords in the cot or within reach of the baby (the unit and cords should be more than 1 metre away). WARNING This digital video Baby Monitor is compliant with all relevant standards regarding electromagnetic fields and is, when handled as described in the User's Guide, safe to use. Therefore, always read the instructions in this User's Guide carefully before using the device. • Adult assembly is required. Keep small parts away from children when assembling. • This product is not a toy. Do not allow children to play with it. • This Baby Monitor is not a substitute for responsible adult supervision. • Keep this User’s Guide for future reference. • Do not place the Baby Unit or cords in the cot or within reach of the baby (the unit and cords should be more than 1 metre away) • Keep the cords out of reach of children. • Do not cover the Baby Monitor with a towel or blanket. • Never use extension cords with power adapters. Only use the power adapters provided. • Test this monitor and all its functions so that you are familiar with it prior to actual use. • Do not use the Baby Monitor near water. • Do not place the Baby Monitor near a heat source. • Only use the chargers and power adapters provided. Do not use other chargers or power adapters as this may damage the device and battery pack. Safety Instructions 9 • Do not touch the plug contacts with sharp or metal objects. CAUTION The Parent Unit includes a built-in, lithium-ion rechargeable battery pack, which is not a user-accessible item. If you think the battery needs replacing, please contact the helpline. Do not try to replace it yourself. Risk of explosion if battery is replaced by an unapproved battery type. Dispose of used batteries according to their instructions. The Unit should be set up and used so that parts of the user's body other than the hands are maintained at a distance of approximately 8 inches (20 cm) or more. 10 Safety Instructions 2.1 1. ENGLISH 2. Getting Started Baby Unit Power Supply Connect the small plug of the power adapter to the Baby Unit (camera) and the other end to a suitable mains power socket. NOTE Only use the enclosed Power Adapter (5V DC / 1500mA). 2. 3. Slide the POWER ON/OFF switch to the ON position to turn the Baby Unit on. Slide the POWER ON/OFF switch to the OFF position to turn the Baby Unit off. IMPORTANT The Baby Unit is able to operate without power connection up to 3 hours with the support of built-in rechargeable battery (Ni-MH battery 2.4V, 900mAh). Please charge the unit at least 16 hours for the first time use. Getting Started 11 2.2 Parent Unit Power Supply IMPORTANT The Parent Unit is assembled with a built-in rechargeable battery pack (Lithium ion battery 1880mAh, to give up to 5 hours monitor operation), please charge it for 16 hours before initial use. The battery is not a user-accessible item. Please contact the helpline if you think it needs replacing. 1. 2. 3. 4. 5. Connect the micro USB plug of the power adapter to the Parent Unit and the other end to a suitable mains power socket. Only use the enclosed power adapter (5V DC / 1500mA) with the micro USB plug. Press and hold the 0 POWER ON/OFF button for 3 seconds to switch ON the Parent Unit. Once the Baby and Parent Units are switched on, the display on the Parent Unit will show the colour video captured by the Baby Unit, but if the baby's room is dark, the video will display in black and white, with a icon showing, due to the infra-red illumination by the Baby Unit. If there is no connection or you are out of range, the video display will go off, a symbol will appear on the screen, and the Parent Unit will beeps continually. Move the Parent Unit closer to the Baby Unit until the link is reestablished. Press and hold the 0 POWER ON/OFF button, until the progress bar finishes scrolling, to turn OFF the Parent Unit. NOTE The battery icon turns RED to indicate that the battery is low, and the parent unit will beep every 15 seconds. The battery needs to be recharged; it will take16 hours to charge fully. 12 Getting Started Getting Started 13 ENGLISH When charging 1. If the Parent Unit is turned OFF with the adapter plugged in, a 2-pin plug logo will appear on-screen for about 5 seconds, and then a flashing battery logo will display for 15 seconds. The Blue LED at the top left will light up; indicating that the adapter is plugged in and charging is continuing. 2. Whilst the power is ON, and the adapter is plugged in, the battery icon at the top right corner of the screen will show that the battery is charging. The Charging LED at the top left will light up to indicate that the adapter is plugged in. 2.3 Registration (Pairing) The Baby Monitor is pre-registered to your Parent Unit. You do not need to register it again unless the Baby Unit loses its link with the Parent Unit. To re-register your Baby Unit, or register a new Baby Unit, follow the procedures below: 1. 2. 3. 4. 5. Press the M button of the Parent Unit and the menu bar will pop up. Press the < LEFT button or > RIGHT button until is highlighted, and the del/ add/ view/ scan menu will pop up. Press the ++UP button or - DOWN button to select add, and press the + O button to confirm. Camera will pop up, press the + UP button or - DOWN ___ button to select the desired Camera, and press the O button to start searching for a camera unit, with "press PAIR on cam" shown. Note: If a camera is currently paired with the Parent Unit, its camera location (with a * against it) cannot be selected for a new registration. Press and hold the PAIR button on the underside of the Baby Unit until the Parent Unit finds the camera, beeps and PAIR OK appears on the screen. The video from the camera will then appear. NOTE If a particular Baby Unit was registered previously, registering this current Baby Unit again will cancel its old registration. 14 Getting Started 3.1 ENGLISH 3. Using the Baby Monitor Setting Up • Place the Baby Unit in a convenient location (e.g. on a table) and point the camera lens towards the area you want to monitor. • Adjust the angle of the Baby Unit's camera by using the pan and tilt function from the Parent Unit, to move up, down, left and right until you are satisfied with the image shown on the Parent Unit. NOTE Do not place the Baby Unit within the baby's reach! If there is interference with the picture or sound, try moving the units to different locations, and ensure they are not close to other electrical equipment. 3.2 Pan and Tilt The camera can be remotely controlled from the Parent Unit when in a camera viewing mode. 1. 2. 3.3 Press the + UP button or - DOWN button to tilt up or down. Press the < LEFT button or > RIGHT button to pan left or right. Night Vision Mode The Baby Unit has 8 high-intensity infrared LEDs for picking up clear images in the dark. When the built-in photo sensor on the top of the Unit detects a low level of ambient light, the LEDs will automatically activate and the screen on the Parent Unit will display in black and white. The icon will be displayed at the top of the screen. 3.4 Talk Mode Press and hold the TALK button T on the Parent Unit to talk to your baby through the Baby Unit’s loudspeaker. The T icon will be displayed at the top of the LCD screen. 3.5 Video ON/OFF Press V VIDEO On/Off button to turn the LCD screen on or off, whilst still leaving the audio monitor on. Using the Baby Monitor 15 3.6 Temperature Display (HH °C / °F or LL °C / °F) The temperature reading from the temperature sensor at the back of the Baby Unit will be displayed at the top of the LCD screen in °C or °F (see 4.7 “Temperature” for how to change). The readings will turn RED if the temperature goes above 29°C / 84°F or below 14°C / 57°F. The reading will change to HH °C / °F if the temperature goes above 36°C / 97°F. The reading will change to LL °C / °F if the temperature goes below 1°C / 34°F. 16 Using the Baby Monitor 4.1 1. 4.2 Volume Press the Volume button - or + to adjust the volume level, the icon will pop up and you can select the desired volume from level 0~8. (The default volume level setting is level 5, and level 0 is OFF .) Brightness 1. Press the M button and the menu bar will pop up. 2. 3. Press the < LEFT button or > RIGHT button until is highlighted. Press the + UP button or - DOWN button to select the desired brightness from level 1 ~ 8. (The default brightness is level 4.) 4.3 Lullaby 1. Press the M button and the menu bar will pop up. 2. 3. Press the < LEFT button or > RIGHT button until is highlighted. Press the + UP button or - DOWN button to select from the 5 sounds available. If a sound is selected, it will repeat continuously until it is deselected. (The default setting is lullaby OFF.) 4.4 Zoom 1. Press the M button and the menu bar will pop up with 2. Press the + UP button or - DOWN button to select 1X or 2X zoom. (The default setting is 1X.) 4.5 1. 2. 3. 4. highlighted. Alarm Press the M button and the menu bar will pop up. Press the < LEFT button or > RIGHT button until is highlighted. Press the + UP button or - DOWN button to select the alarm time (6h, 4h, 2h), and the will turn on. (The default setting is Alarm OFF.) If an alarm time is selected, the Parent Unit will beep for about 1 minute after every 6, 4 or 2 hour period, and the will flash. Press any button to stop the alarm. Parent Unit Menu Options 17 ENGLISH 4. Parent Unit Menu Options 4.6 Camera Control 4.6.1 1. 2. 3. 4. 5. Add (pair) a camera Press the M button and the menu bar will pop up. Press the < LEFT button or > RIGHT button until is highlighted, and del/ add/ view/ scan menu will pop up. the Press the ++UP button or - DOWN button to select add, and press the + O button to confirm. Camera will pop up, press the + UP button or - DOWN ___ button to select the desired Camera, and press the O button to start searching for a camera unit. Note: If a camera is currently paired with the Parent Unit, its camera location (with a * against it) cannot be selected for a new registration. Press and hold the PAIR button on the underside of the Baby Unit until the Parent Unit finds the camera, beeps and PAIR OK appears on the screen. The video from the camera will then appear. NOTE A camera can only be registered to one Parent Unit at any one time. 4.6.2 1. 2. 3. 4. View a camera Press the M button and the menu bar will pop up. Press the < LEFT button or > RIGHT button until is highlighted, and the del/ add/ view/ scan menu will pop up. Press the ++UP button or - DOWN button to select view, and press the O button to confirm. Camera will pop up. Press the + UP button or - DOWN ___ button to select the desired camera, and press the O button to view the picture from that camera. Note: Only camera locations with a * can be selected. TIP Quick Method to View Cameras instead of entering into the menu bar. Directly press the O button repeatedly to select the available Camera options from , , , , .. 18 Parent Unit Menu Options 1. 2. 3. 4. 5. Delete a camera ENGLISH 4.6.3 Press the M button and the menu bar will pop up. Press the < LEFT button or > RIGHT button until is highlighted, and del/ add/ view/ scan menu will pop up. the Press the ++UP button or - DOWN button to select del, and press the O button to confirm. Camera ___ will pop up, press the + UP button or - DOWN button to select the desired Camera, and press the O button. Press the + UP button or - DOWN button to select , then press the O button to delete that registration. NOTE You are not allowed to delete the camera if there is only one registered camera in the system. 4.6.4 Scan camera This function is only available when you have more than 1 Baby Unit (Camera). 1. 2. 3. 4. Press the M button and the menu bar will pop up. Press the < LEFT button or > RIGHT button until is highlighted, and the del/ add/ view/ scan menu will pop up. Press the ++UP button or - DOWN button to select scan, and press the O button to confirm. The screen will then display images from different registered cameras in a loop of Camera , changing about every 12 seconds. ___ TIP Quick Method to View Cameras instead of entering into the menu bar. Directly press the O button repeatedly to select the available Camera options from . , , , , 4.7 1. 2. 3. Temperature Press the M button and the menu bar will pop up. Press the < LEFT button or > RIGHT button until is highlighted. Press the + UP button or - DOWN button to select °C or °F. Parent Unit Menu Options 19 4.8 1. 2. 3. Power Saving Mode Press the M button and the menu bar will pop up. Press the < LEFT button or > RIGHT button until V is highlighted. Press the + UP button or - DOWN button to select auto video off after 5 mins, 30 mins or 60 mins if operating on batteries only. NOTE The audio will remain and you can press any key to switch the video back on. 4.9 View multiple cameras on screen This function is only available when you have more than 1 Baby Unit (Camera). When the Split Screen function is On, you can view multiple cameras on the screen, although only hear audio from one screen at a time. 1. 2. 3. 4. Press the M button and the menu bar will pop up. Press the < LEFT button or > RIGHT button until is highlighted. Press the + UP button or - DOWN button to select Split Screen On / Off . When the Split Screen function is On, you can press the < LEFT button or > RIGHT button/ + UP button or - DOWN button to switch between cameras to hear the audio from the selected camera, indicated by the red frame. Note: When in multi-screen mode the TALK button operates with the selected camera. If you want to play a lullaby sound through a camera, you must set this before selecting the multi-screen mode. Zoom does not work in multi-screen mode. 20 Parent Unit Menu Options 5.1 ENGLISH 5. Wi-Fi® Internet Viewing Minimum System Requirements Web Portal • • • • • • • • Windows® 7 Mac OS® 10.7 Chrome™ 24 Internet Explorer® 9 Safari® 6 Java™ 7 Firefox® 18.0 Adobe® Flash® Player 15.0 Android™ System • Version 4.2 or above iPhone®/iPad® iOS • Version 7.0 or above High Speed (Wi-Fi®) Internet • At least 0.6 Mbps upload bandwidth per camera (you can test your internet speed on this site: http://www.speedtest.net) Wi-Fi® Internet Viewing 21 5.2 Getting Started - Connecting Devices How does it work? MBP855CONNECT Camera Wi-Fi Router Access your Camera locally. View your Camera from any compatible device remotely. Hubble Service When a user tries to access the Camera, the Hubble server will authenticate the user’s identity before it grants access to the Camera. 5.2.1 Setup • Connect the power adapter to a suitable mains power socket and insert the plug into the micro USB socket on the back of the Camera Unit. • Slide the ON/OFF switch to the ON position. • The Camera Unit must be within range of the Wi-Fi® router with which you want to connect. Make sure that you have the password of the router for the setup process. Behavior of the status Indicator LED: Pairing and setting up Flashes slowly in red and blue Unconnected Flashes slowly in blue Connected Lights up in blue Ready for connection Flashes slowly in blue Note You can only setup via a compatible smartphone or tablet, and not via a PC. 22 Wi-Fi® Internet Viewing User Account and Camera Setup on Android™ Devices ENGLISH 5.3 What you need • Wi-Fi® Camera Unit • Power adapter for the Camera • Device with AndroidTM system version 4.2 and above 5.3.1 Power ON and Connect the Camera • Connect the power adapter to a suitable mains power socket and insert the plug into the micro USB socket on the back of the Camera Unit. • Make sure that the ON/OFF switch is in the ON position. • The Camera’s Red LED flashes after the Camera has finished booting. When you hear one beep, this means that the Camera is ready for setup. 5.3.2 Download Hubble for Motorola Monitors App • Go to Google Play™ Store to search for "Hubble for Motorola Monitors". • Download "Hubble for Motorola Monitors" App from Google Play™ Store and install it on your Android™ device 5.3.3 Run Hubble for Motorola Monitors App on Android™ device • Ensure that your Android™ device is connected to your Wi-Fi® router. • Run "Hubble for Motorola Monitors" App, enter your account information, read through the Terms of Service, then select "I agree to the Terms of Use" before you tap Create. (Picture A1) Note If you already have a Hubble App account, please select Already have an Account? to go to the next step. A1 Wi-Fi® Internet Viewing 23 5.3.4 • Tap Add the Camera to your account on the top right corner of the screen to add camera. (Picture A2) A2 • The following setup instructions will appear on the screen. (Picture A3) A3 • Plug in and switch on the camera, and wait for a couple of minutes for it to warm up. • Tap Continue when the Camera LED starts to blink. 24 Wi-Fi® Internet Viewing ENGLISH • The following setup instructions will appear on the screen. (Picture A4) A4 • Press and hold the PAIR button on the bottom of the Camera Unit for 3 seconds. You will then hear a beep tone, followed by a voice prompt indicating that the Camera is ready for pairing. • Tap Continue. • The App will automatically search for and connect to your Camera as shown in the pictures below. (Pictures A5, A6) • The blue/red colour LED on the Camera Unit will flash. A5 Wi-Fi® Internet Viewing A6 25 • Select your Wi-Fi® Network, enter your password and then tap Connect. (Pictures A7, A8) A8 A7 • It will take a few minutes for the Camera to connect to the Wi-Fi® network before showing the connection status. (Pictures A9, A10) • If connection fails, please tap Retry and repeat the steps starting from 5.3.4. A9 A10 • Tap View Camera to view the video captured by the Camera Unit. The LED indicator on the Camera Unit will light up in blue. 26 Wi-Fi® Internet Viewing User Account and Camera Setup on iPhone®/iPad® ENGLISH 5.4 What you need • Wi-Fi® Camera Unit • Power adapter for the Camera • iPhone® / iPad® with iOS version 7.0 and above 5.4.1 Power ON and Connect the Camera • Connect the power adapter to a suitable mains power socket and insert the plug into the micro USB socket at the back of the Camera. • Make sure that the ON/OFF switch is in the ON position. • The Camera's red LED flashes after the Camera has finished booting. When you hear one beep, this means that the Camera is ready for setup. 5.4.2 Download Hubble for Motorola Monitors App • Go to App Store to search for "Hubble for Motorola Monitors". • Download "Hubble for Motorola Monitors" App and install it on your iPhone®/iPad®. 5.4.3 Run Hubble for Motorola Monitors App on iPhone®/iPad® • Ensure that your iPhone®/iPad® is connected to your Wi-Fi® Router. • Run the "Hubble for Motorola Monitors" App, enter your account information, read through the Terms of Service, and then select "I agree to the Terms of Service" before you tap Create. (Picture i1) NOTE If you already have a Hubble App account, please select Already have an Account? to go to the next step (Picture i1). i1 Wi-Fi® Internet Viewing 27 5.4.4 • Tap Add the Camera to your account on the top right corner of the screen to add camera. (Picture i2) i2 • The following Bluetooth setup instructions will appear on the screen. (Picture i3) i3 28 Wi-Fi® Internet Viewing ENGLISH • Tap Settings and activate Bluetooth on your iPhone®/iPad®. (Pictures i4,i5) i5 i4 • Press the HOME key to return to the home screen, then tap on "Hubble for Motorola Monitors" App to resume setup. • The following setup instructions will appear on the screen. (Picture i6) Note that if Bluetooth is on, you will be brought to this step directly. i6 • Wait for a couple of minutes for the Camera Unit to warm up and tap Continue when the Camera LED indicator starts to blink. Wi-Fi® Internet Viewing 29 • The following will appear on the screen. Select the Camera ID detected on your iOS® device and tap Connect. (Pictures i7, i8) i7 i8 • Name the location of your Camera Unit and tap Continue. (Pictures i9, i10) i9 30 i10 Wi-Fi® Internet Viewing i12 i11 • Select your Wi-Fi® network and tap Continue. (Picture i13) • Enter your Wi-Fi® password and tap Next. (Picture i14) i13 i14 • It will take a few minutes for the Camera Unit to connect to the Wi-Fi® network before showing the connection status. (Pictures i15, i16) Wi-Fi® Internet Viewing 31 ENGLISH • The Camera Unit will search for the Wi-Fi® network (Picture i11) and display a list of available networks. (Picture i12) • If connection fails, tap Retry and repeat the steps starting from 5.4.4. i15 i16 • Tap View Live Camera to view the video captured by the Camera Unit. The LED indicator on the Camera Unit will light up in blue. 32 Wi-Fi® Internet Viewing Camera Functions: 5.5.1 Connecting the Camera Unit to power • Connect the power adapter to a suitable mains power socket and insert the plug into the micro USB socket on the back of the Camera Unit. • Slide the ON/OFF switch to the ON position. The power indicator LED will light up in green. (Note: To switch off the device, slide the ON/OFF switch to OFF.) • Run the Hubble App on your smart device. 5.5.2 Overview of the Features on Hubble App Menu • Tap Cameras to access the camera list. to access the video record • Tap Event Log list that is triggered by Motion or Sound detection. • Tap Account to access user Profile, subscription Plan, Notifications setting, Remote Connection Setting and About Hubble Photo/Video • Take a photo or record a video from your Camera. • Tap the Video icon to activate Video function. Tap and hold the red button to start recording and release to stop. • Tap the Camera icon to switch to Camera mode. You can capture photos from Camera view. NOTE Photos and videos will be stored in the internal flash memory of your smart device, and can be accessed via the Gallery or Media Player (AndroidTM Device). To play videos, please use the Hubble App. Wi-Fi® Internet Viewing 33 ENGLISH 5.5 34 Lullaby Tap to access the Melody menu and select one of the 5 pre-set melodies you wish to play on your Camera Unit. Temperature Measure The temperature reading from the temperature sensor at the back of the Camera Unit will display on the screen of your Android™ device. The readings will turn RED if the temperature goes beyond the High/Low temperature that was set in your Account. Two-way communication Tap to activate the function. Press the round button once to speak through the Camera Unit. Toggle the button again to listen to the audio feedback from the Camera Unit. Speaker Tap to toggle speaker on or off. Zoom Slide the scroll bar on the right hand side of the screen to zoom in or zoom out. You can also use the pinch-in and pinch-out gestures to zoom out or zoom in a picture. To use pinch-to-zoom gesture, your device must support multi-touch technology. Wi-Fi® Internet Viewing You can change the Camera settings by tapping on the Settings icon. • Tap Details to review Camera Name, Cloud Subscription, Change Image, Timezone, Camera Model, Firmware Version and Delete All Events. • Tap Notifications to set the sensitivity of Sound Detection, Motion Detection and to set Alerts for High temperature (Up to 33 oC or 91 oF) / Low temperature (down to 10o C or 50 oF). • Tap Settings to set Ceiling mount, Brightness and Volume. Add Camera Enter Add Camera procedures. Delete All Events Tap to delete all events. Select Events Check the box to select recorded event(s). Edit Events Tap to select and delete event(s). Delete Events Tap to delete selected event(s). Wi-Fi® Internet Viewing ENGLISH Camera Setting 35 5.6 Working with PC/Notebook • Go to https://app.hubbleconnected.com/#login Enter your User Name and Password, and then click Login if you have already created an account. • Click on the Camera list paired in your account via Android™ device or iPhone®/iPad®, and the Camera view will appear on screen. You can easily stay connected with your favorite people, places and pets with live video streaming. • On the website, you can change the Settings by following the menu instructions. 5.7 Procedure for Resetting the Camera Note: If your Camera is moved from one router (e.g. home) to another (e.g. office) or you have Camera setup issues, then the Camera must be reset. Please reset the Camera with the following procedures: 1. 2. 3. 4. 36 Slide the ON/OFF switch to OFF. Press and hold the PAIR button, then slide the ON/OFF switch to ON. Release the PAIR button when you hear a confirmation beep and wait for the Camera Unit to complete an internal reset procedure. The LED indicator will turn red and flash slowly when the Camera Unit is reset successfully. You can add your Camera again by following the steps in section 5.3.4 for AndroidTM devices or in section 5.4.4 for iOS® devices. Wi-Fi® Internet Viewing ENGLISH 6. Disposal of the Device (Environment) At the end of the product life cycle, you should not dispose of this product with normal household waste. Take this product to a collection point for the recycling of electrical and electronic equipment. The symbol on the product, user's guide and/or box indicates this. Some of the product materials can be re-used if you take them to a recycling point. By reusing some parts or raw materials from used products you make an important contribution to the protection of the environment. Please contact your local authorities in case you need more information on the collection points in your area. Dispose of the battery pack in an environmentally-friendly manner according to your local regulations. Disposal of the Device (Environment) 37 7. Cleaning Clean your Digital Video Baby Monitor with a slightly damp cloth or with an antistatic cloth. Never use cleaning agents or abrasive solvents. Cleaning and care • Do not clean any part of the Digital Video Baby Monitor with thinners or other solvents and chemicals - this may cause permanent damage to the product which is not covered by the warranty. • Keep your Digital Video Baby Monitor away from hot, humid areas or strong sunlight, and do not let it get wet. • Every effort has been made to ensure high standards of reliability of your Digital Video Baby Monitor. However, if something does go wrong, please do not try to repair it yourself - contact Customer Service for assistance. IMPORTANT Always switch off and disconnect the power adapter before cleaning your Digital Video Baby Monitor. 38 Cleaning Display No display • Try recharging or replacing the battery pack. • Reset the Units. Disconnect the battery pack of the Parent Unit and unplug both the Units' electrical power, then plug them back in. • Is the Unit switched on? Press and hold the ON/OFF button 0 on the Parent Unit to switch it ON. • Is the correct camera selected? Change the camera number, if necessary. • Is the video display turned on? Press the VIDEO ON/OFF button V to turn it ON. • When operating using batteries only, the display will go blank after 5 minutes or 30 minutes or 60 minutes to save power (depending on video settings). The Unit is still active and will give you audio alerts. You can reactivate the screen by pressing any button. Registration If the Baby Unit has lost its link with the Parent Unit • Try recharging or replacing the battery pack. • If the Baby Unit is too far away it may be going out of range, so move the Baby Unit closer to the Parent Unit. • Reset the Units by disconnecting them from the battery and electrical power. Wait about 15 seconds before reconnecting. Allow up to one minute for the Baby Unit and the Parent Unit to synchronise. • See 2.3 Registration (Pairing), if there is a need to re-register the Units. Interference Noise interference on your Parent Unit • Your Baby and Parent Units may be too close. Move them further apart. • Make sure there is at least 1 to 2m between the 2 Units to avoid audio feedback. • lf the Baby Unit is too far away, it may be out of range. Move the Baby Unit closer to the Parent Unit. Help 39 ENGLISH 8. Help • Make sure that the Baby and Parent Units are not near other electrical equipment, such as a television, computer or cordless/mobile telephone. • Use of other 2.4 GHz products, such as wireless networks (Wi-Fi® routers), Bluetooth™ systems, or microwave ovens, may cause interference with this product. Keep the Baby Monitor at least 1.5m away from these types of products, or switch them off if they appear to be causing interference. • If the signal is weak, try moving the Parent and/or Baby Unit to different positions in the rooms. Noise interference on your device • To avoid background noise or echoes, ensure that there is enough distance between your device and the Wi-Fi® Camera Unit. • Use of other 2.4 GHz products, such as Bluetooth™ systems or microwave ovens, may cause interference with this product. Keep the Wi-Fi® Camera Unit at least 1.5m away from these types of products, or switch them off if they appear to be causing interference. Lost connection • Check your Wi-Fi® settings. If necessary, reconnect your Wi-Fi®. Ensure that the Wi-Fi® Camera Unit is switched ON. Wait a few minutes to make the connection with the Wi-Fi® system. If you forgot your password • If you do not remember your password, tap Forgot Password and submit your e-mail address. A new password will be sent to your e-mail address immediately. 40 Help Category Problem Description / Error ENGLISH Troubleshooting for Wi-Fi® Internet Viewing Solution Account I am unable to login Please check your user name and even after registration. password. Account Please ensure that you have I receive an error message saying: "Email registered with us. Tap Create Account to create an account. ID is not registered". Account What do I do if I forget Click on the "Forgot Password" link on my password? https://app.hubbleconnected.com/ #lostpassword OR on your Android™ or iOS application. An email will be sent to your registered email address. Account I am unable to receive a 1. new password although I have used the "Forgot 2. password" option. The e-mail might have been sent to your Junk Mail Folder. Please check your Junk Mail Folder. There might be a delay in getting your e-mail. Please wait a few minutes and refresh your email account. 1. Connectivity I get a message: We Issues are having problems accessing your Camera. This could be 2. due to the lack of an internet connection. Please wait and try 3. again later. Please try again in a few minutes. This could be because of any issue with your internet connection. If the problem remains, please restart your Camera to check if this fixes the problem. Please restart your Wireless Router. Help 41 Viewing Camera When I am in "remote mode", the video stops after 5 minutes. How do I view for longer? When you are accessing your Camera via a network different from your home network (over the internet) your video times out after 5 minutes. You can click on the Camera again from the Android™/iOS application to start streaming again. If you are accessing from your webbrowser, then you can press on the Reload button to start viewing your Camera video stream again. Features The sound alert setting You can Adjust Sound Sensitivity to threshold is not right. trigger notifications under Camera Setting menu. Setting Up While I am adding a new Camera to my account, I am not able to find any Cameras to add. If you are trying to add a Camera which has previously been added into your account or another account, you will first have to reset the Camera. This can be done by pressing and holding the PAIR button at the bottom of the Camera for 5 seconds. General What are the supported browsers for accessing from my PC/ Mac? We recommend using Google Chrome 24 or above. However the following browsers are also supported: Internet Explorer 9.0 or above (for PC), Safari 6.0 or above (for Mac) or Firefox 18.0 or above (both PC or Mac). 42 Help What is the significance of LED flashing? A flashing LED indicates the following status: Slow flashing: 1. Your Camera is in setup mode. You can add the Camera to your account in this mode. Out of the box, the Camera is in Setup mode. To reset to Setup mode, press and hold the PAIR button on the bottom of the Camera untill you hear a beep. Slow flashing: 2. The Camera is either connecting to the router or has lost the link to the router. Please ensure that the Camera is in the Wi-Fi® signal range. LED is stable: The Camera is connected to the Wi-Fi® network. Connectivity I am not able to access Please check if the Camera is within Wi-Fi® range. If the LED on your Camera Issues my Camera. is flashing slowly, please try to move the Camera closer to the router for better Wi-Fi® connectivity and try again. Setting Up Help During setup on devices for Android™ and iOS, I am not able to find my Camera during the last step and the setup fails. Please reset the Camera to setup mode and try again. Press and hold the PAIR button on the bottom of the Camera untill you hear a beep. Wait for a minute for the Camera to restart. When the Camera LED is flashing, this indicates that it is in setup mode. Now restart the setup from your smartphone again. 43 ENGLISH General Connectivity Even though I am Issues accessing my Camera from the same Wi-Fi® network, I still find my Camera is shown as remote. I can only access it for 5 minutes at a time. Please check your wireless router settings. For example, for Buffalo brand routers there is an option called Wireless Isolation. Please disable this option. Camera When I try to view the Camera, I get a prompt for Camera firmware upgrade. What should I do? Please upgrade your firmware. This takes around 5 minutes. We push upgrades from time to time to improve Camera features. General Minimum requirement: Which platforms are Windows® 7* supported for accessing my Camera? *Java browser plug-in needed Mac OS® version 10.7 Chrome™ version 24 Internet Explorer® version 9 Safari® version 6 Java™ version 7 Firefox® version 18.0 Adobe® Flash® Player 15.0 Android™ 4.2 iPhone® /iPad® iOS version 7.0 General I do not hear any sound You can tap on the speaker icon in the when I am accessing a video stream screen to hear audio. By default the audio is not ON when you remote Camera. are accessing a remote Camera. 44 Help What is the meaning of When you are accessing your Camera from the same wireless network (Home) "Local Camera" and in which it is configured, "Remote Camera"? it is a Local Camera. When you are accessing your Camera away from your home it is a Remote Camera. You may be using 3G, 4G or 4G LTE or a Wi-Fi® connection outside of your home. General How do I download the Android™: App for Android™ and - Open the Google Play Store on iOS devices? your Android™ device. - Select Search - Type in "Hubble for Motorola Monitors" - The results will show the Hubble App - Select to install it iOS Device: - Open the App StoreSM - Select Search - Type in "Hubble for Motorola Monitors" - The results will show the Hubble App - Select to install it Setting up When the video is cut You will need to turn off the Auto Lock function of your device to ensure off, the application attempts to reconnect continuous video/audio streaming. and this results in lost sound and choppy video. Help 45 ENGLISH General Features How many users can access the Camera at one time? Connectivity I found interference issues caused by my other webcam devices. 46 If you are accessing in Local Mode, two users are supported, after two users all streaming will go through the remote server. This allows for unlimited user access to a single Camera at one time. Video streaming performance is related to internet bandwidth, especially if you have 2 or more video streaming devices that are working through the same router. Help ENGLISH 9. General Information If your product is not working properly... 1. 2. 3. Read this User's Guide or the Quick Start Guide. Visit our website: www.motorolahome.com Contact Customer Service at +44 (0) 844 557 0890(UK only)* * Calls cost 7p per minute plus your telephone company's access charge +44 (0) 8187 62092 (ROI) To order a replacement battery pack for parent Unit, contact customer service. Consumer Products and Accessories Limited Warranty ("Warranty") Thank you for purchasing this Motorola branded product manufactured under license by Binatone Electronics International LTD ("BINATONE") What Does this Warranty Cover? Subject to the exclusions contained below, BINATONE warrants that this Motorola branded product ("Product") or certified accessory ("Accessory") sold for use with this product that it manufactured to be free from defects in materials and workmanship under normal consumer usage for the period outlined below. This Warranty is your exclusive warranty and is not transferable. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY HAVE OTHER RIGHTS THAT VARY BY STATE, PROVINCE OR COUNTRY. FOR CONSUMERS WHO ARE COVERED BY CONSUMER PROTECTION LAWS OR REGULATIONS IN THEIR COUNTRY OF PURCHASE OR, IF DIFFERENT, THEIR COUNTRY OF RESIDENCE, THE BENEFITS CONFERRED BY THIS LIMITED WARRANTY ARE IN ADDITION TO ALL RIGHTS AND REMEDIES CONVEYED BY SUCH CONSUMER PROTECTION LAWS AND REGULATIONS. FOR A FULL UNDERSTANDING OF YOUR RIGHTS YOU SHOULD CONSULT THE LAWS OF YOUR COUNTRY, PROVINCE OR STATE. General Information 47 Who is covered? This Warranty extends only to the first consumer purchaser, and is not transferable. What will BINATONE do? BINATONE or its authorised distributor at its option and within a commercially reasonable time, will at no charge repair or replace any Products or Accessories that do not conform to this Warranty. We may use functionally equivalent reconditioned/ refurbished/ pre-owned or new Products, Accessories or parts. What Other Limitations Are There? ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY, OTHERWISE THE REPAIR OR REPLACEMENT PROVIDED UNDER THIS EXPRESS LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. IN NO EVENT SHALL MOTOROLA OR BINATONE BE LIABLE, WHETHER IN CONTRACT OR TORT (INCLUDING NEGLIGENCE) FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE PRODUCT OR ACCESSORY, OR FOR ANY INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES OF ANY KIND, OR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE ABILITY OR INABILITY TO USE THE PRODUCTS OR ACCESSORIES TO THE FULL EXTENT THESE DAMAGES MAY BE DISCLAIMED BY LAW. Some jurisdictions do not allow the limitation or exclusion of incidental or consequential damages, or limitation on the length of an implied warranty, so the above limitations or exclusions may not apply to you. This Warranty gives you specific legal rights, and you may also have other rights that vary from one jurisdiction to another. 48 General Information Length of Coverage One (1) year from the date of the products original purchase by the first consumer purchaser of the product. Consumer Accessories Ninety (90) days from the date of the accessories original purchase by the first consumer purchaser of the product. Consumer Products and Accessories The balance of the original warranty or that are Repaired or Replaced for ninety (90) days from the date returned to the consumer, whichever is longer. Exclusions Normal Wear and Tear. Periodic maintenance, repair and replacement of parts due to normal wear and tear are excluded from coverage. Batteries. Only batteries whose fully charged capacity falls below 80% of their rated capacity and/or batteries that leak are covered by this Warranty. Abuse & Misuse. Defects or damage that result from: (a) improper operation, storage, misuse or abuse, accident or neglect, such as physical damage (cracks, scratches, etc.) to the surface of the product resulting from misuse; (b) contact with liquid, water, rain, extreme humidity or heavy perspiration, sand, dirt or the like, extreme heat, or food; (c) use of the Products or Accessories for commercial purposes or subjecting the Product or Accessory to abnormal usage or conditions; or (d) other acts which are not the fault of MOTOROLA or BINATONE, are excluded from coverage. Use of Non-Motorola branded Products and Accessories. Defects or damage that result from the use of Non-Motorola branded or certified Products or Accessories or other peripheral equipment are excluded from coverage. General Information 49 ENGLISH Products Covered Consumer Products Unauthorised Service or Modification. Defects or damages resulting from service, testing, adjustment, installation, maintenance, alteration, or modification in any way by someone other than MOTOROLA, BINATONE or its authorised service centres, are excluded from coverage. Altered Products. Products or Accessories with (a) serial numbers or date tags that have been removed, altered or obliterated; (b) broken seals or that show evidence of tampering; (c) mismatched board serial numbers; or (d) nonconforming or non-Motorola branded housings, or parts, are excluded from coverage. Communication Services. Defects, damages, or the failure of Products or Accessories due to any communication service or signal you may subscribe to or use with the Products or Accessories is excluded from coverage. How to Obtain Warranty Service or Other Information? To obtain service or information, please call: +44 (0) 844 557 0890 (UK only)* * Calls cost 7p per minute plus your telephone company's access charge +44 (0) 8187 62092 (ROI) You will receive instructions on how to ship the Products or Accessories at your expense and risk, to a BINATONE Authorised Repair Centre. To obtain service, you must include: (a) the Product or Accessory; (b) the original proof of purchase (receipt) which includes the date, place and seller of the Product; (c) if a Warranty card was included in your box, a completed Warranty card showing the serial number of the Product; (d) a written description of the problem; and, most importantly; (e) your address and telephone number. These terms and conditions constitute the complete warranty agreement between you and BINATONE regarding the Products or Accessories purchased by you, and supersede any prior agreement or representations, including representations made in any literature publications or promotional materials issued by BINATONE or representations made by any agent, employee or staff of BINATONE, that may have been made in connection with the said purchase. 50 General Information ENGLISH BINATONE TELECOM PLC 1 Apsley Way London NW2 7HF,United Kingdom. Tel: +44(0) 20 8955 2700 Fax: +44(0) 20 8344 8877 e-mail: [email protected] ________________________________________ . EC Declaration of Conformity We the manufacturer / Importer : Binatone Telecom Plc 1 Apsley Way London NW2 7HF, United Kingdom. Declare under our sole responsibility that the following product 5” Portable Digital Video Baby Monitor with Wi-Fi ® Type of equipment: MBP855CONNECT, MBP855CONNECT-2, Model Name: MBP855CONNECT-3, MBP855CONNECT-4 China Country of Origin: Motorola Brand: complies with the essential protection requirements of R&TTE Directive 1999/5/EC on the approximation of the laws of the Member States relating to Radio Spectrum Matters, the Council Directive /108/EC on the approximation of the laws of the Member States relating to electromagnetic compatibility (EMC) and the European Community Directive 2006/95/EC relating to Electrical Safety. Directive 2011/65/EC on the restriction of use of hazardous substances (RoHS) and 2009/125/EC relating to ecodesign requirement for Energy-Related Products (ErP). Assessment of compliance of the product with the requirements relating to the essential requirements according to Article 3 R&TTE was based on Annex III of the Directive 1999/5/EC and the following standard: Radio Spectrum: EMC: Electrical Safety: RF Safety: LED Measurement: ErP: EN300328 V1.9.1:2012 EN301489-17 V2.2.1 EN301489-1 V1.9.2 (2011-09) EN 60950-1: 2006+A11: 2009+A1: 2010+A12: 2011+A2: 2013 EN62479:2010 (For Baby Unit), EN50385:2002 (For Parent Unit) EN62471:2008 IM1275 with Amd 801/2013 The product is labelled with the European Approval Marking CE as show. Any Unauthori ed modification of the product voids this Declaration. Manufacturer / Importer (Signature of authori ed person) London, 29 December, 2016 Karl Heinz Mueller / Chief Technical Officer General Information Place & Date 51 10. Technical Specifications BABY UNIT Frequency 2.4GHz to 2.48 GHz Image sensor colour CMOS 1M Pixels Operating Temperature 0oC - 45oC IR LED 6 pcs Power Adapter Ten Pao International Ltd. S012BEB0500150 Input: 100-240V AC, 50/60Hz, 500mA; Output: 5.0V DC, 1500mA WARNING Use only with supplied power supply. Battery (built-in) GPI INTERNATIONAL LTD. 2.4V, 900mAh Ni-MH, rechargeable battery pack (gives up to 3 hours operation) WARNING Do not attempt to replace the battery, but contact Customer Service if it needs replacing. 52 Technical Specifications Frequency ENGLISH PARENT UNIT 2.4 GHz to 2.48 GHz Display 5" diagonal TFT LCD Display Colours 16.7M colour LCD Operating Temperature 0oC - 45oC Brightness Control 8 steps Volume Control 8 steps + Off Power Adapter Ten Pao International Ltd. S012BEB0500150 Input: 100-240V AC, 50/60Hz, 500mA; Output: 5.0V DC, 1500mA WARNING Use only with provided power supply. Battery (built-in) LG Chemical Limited (Motorola BF6X) 3.7V, 1880mAh Lithium-Ion Polymer, rechargeable battery pack (gives up to 5 hours operation) WARNING Do not attempt to replace the battery, but contact Customer Service if it needs replacing. Technical Specifications 53 Manufactured, distributed or sold by Binatone Electronics International LTD., official licensee for this product. MOTOROLA and the Stylised M logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC. and are used under license. Apple logo and Safari are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc. Google Play, Android, and Chrome are trademarks of Google Inc. Wi-Fi is a trademark of the Wi-Fi Alliance. Internet Explorer and Windows are trademarks of the Microsoft group of companies. Firefox is a registered trademark of the Mozilla Foundation. Adobe and Flash are either registered trademarks or trademarks of Adobe Systems Incorporated. Java is a registered trademark of Oracle and/or its affiliates. All other trademarks are the property of their respective owners. © 2017 Motorola Mobility LLC. All rights reserved. UK_EN Version 1.0 Printed in China
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project