infotec - 4mat Digital Solutions

infotec - 4mat Digital Solutions
infotec
Launch Guide
HV Professional Finishing
Z-folding Unit, Booklet Finisher
& GBC Streampunch
CONTENTS
Page
INTRODUCTION .............................................................................................................
Z-FOLDING UNIT ...........................................................................................................
SR90+ BOOKLET FINISHER & TRIMMER ....................................................................
BF90+ BOOK FOLDER...................................................................................................
¾ Sales Points & Major Features ................................................................
o To provide a unique solution in combination with SR90+ ...........
o The Book Folder gives the book a square formed spine ..............
o The Book Folder binding has a huge price advantage ................
o Communication with SR90+ ........................................................
o The Book Folder is better for the Environment ............................
o User Interface ..............................................................................
¾ The Difference between Booklet Finishers & Booklet Makers .................
¾ Recommended Volumes .........................................................................
GBC STREAMPUNCH ...................................................................................................
¾ Key Features & Sales Points ...................................................................
o Reduction of labour cost ..............................................................
o Shorter Turnaround time ..............................................................
o Elimination of Pre-punched paper ................................................
o Added Value for PFP & CRD Services ........................................
o Major Selling Points .....................................................................
¾ Marketing Approach .................................................................................
o Key Marketing Objectives ............................................................
o Positioning ...................................................................................
o Competitors ..................................................................................
o Target User Classification ............................................................
¾ Die Sets ...................................................................................................
o Available Die Sets ........................................................................
o Punching Patterns ........................................................................
¾ Supplies & Off-line Binding Equipment ....................................................
¾ Binding Trends in Europe ........................................................................
¾ Targeted Reliability ..................................................................................
¾ StreamPunch Option Combinations ........................................................
CONFIGURATION & PART NUMBERS ........................................................................
PRODUCT SPECIFICATIONS .......................................................................................
¾ Z-Folding Unit ..........................................................................................
o Z-Folding Unit Limitations ............................................................
¾ Booklet Maker SR90+ ..............................................................................
¾ Trimmer TR90+ .......................................................................................
¾ Cover Feeder CF90 .................................................................................
¾ Book Folder BF90+ ..................................................................................
o Functional Remarks .....................................................................
o Jam Conditions ............................................................................
o Fault Codes ..................................................................................
¾ GBC StreamPunch ..................................................................................
o Mainframe Connection .................................................................
o Standard Accessories ..................................................................
NOTES ............................................................................................................................
1
2
3
4
4
4
4
5
5
5
5
6
6
7
8
8
8
8
8
8
9
9
10
10
10
10
11
11
12
13
14
14
15
16
16
16
17
18
18
19
19
20
20
21
21
22
23
infotec
Product Launch Information
HV Accessories
INTRODUCTION
Since the introduction of the Infotec 4850MF and 4105MF in 2000 and then the IS2090 and
IS2105 in 2003, they have been established as one of the major players in the high volume
sector.
In order to increase our Total Document Volume (TDV) and MIF, the IS2090 and 2105 models
were specifically developed to meet the needs of the production environment in the Central
Reprographics Department (CRD) and Print for Pay (PFP) sector, as well as the needs of any
organisation with high volume requirements, such as: schools, colleges, training depts etc.
In March this year the IS2090 and IS2105 were seamlessly upgraded to the IS2090e and
IS2105e providing even greater Durability, Reliability and Quality.
In order to maintain our excellent position in this market and provide a more versatile solution
within the production environment, several new finishing options have been introduced:¾ Z-Folding Unit
¾ Plockmatic SR90+ Booklet finisher, trimmer and the new Book Folder.
¾ GBC Stream Punch
These 3 options provide professional on-line finishing for documents which would once have
been performed manually or outsourced at great expense.
Using these finishing solutions, organisations can not only produce more professional looking
documents, but have total control over their production facility, cutting costs and saving time.
This Launch Document is designed to provide you with the information you require in order to
effectively sell these products,
January 2005
-1-
infotec
Product Launch Information
HV Accessories
Z-FOLDING UNIT
This Z-folding unit is the same for both the IS2090 and IS2105 as well as the IS2151, IS2160
and IS2175. With the Z-folding unit, we can provide customers with the benefit of reducing
their outsourcing costs. The Z-folding unit enhances the strong and versatile finishing
capability of these machines.
Folding direction
Mixed size originals
The relationship between the size of the front page and that of subsequent pages determines
whether the subsequent pages can be Z-folded. One should select the folding position
according to the print direction. If the size of the paper is the same as that of the front page,
the paper can be Z-folded only if the front page can be Z-folded. As shown below, paper is
delivered face down, with the feeding-edge is folded.
Paper feeding direction
Z-folding
unit
Finisher
Face down
The following types of paper cannot be Z-folded:
¾ Translucent paper
¾ OHP Transparencies
¾ Label paper (adhesive labels)
¾ Tab Stock
¾ Thick Paper
¾ Paper inserted from the Cover Interposer
Note: The Z-Folder can only be fitted with the SR841 (Not the SR840) when connected to
the IS2090/2105 and the SR861 when connected with the IS2151/2160/2175.
January 2005
-2-
infotec
Product Launch Information
HV Accessories
SR90+ BOOKLET FINISHER & TRIMMER
In order to increase the versatility of the SR90 booklet finisher, a new model, the SR90+ has
been introduced. The difference between this and the SR90 is that the SR90+ can now handle
up to 25 sheets per booklet – i.e. up to 100 pages in a document (most competitors only offer
up to 15 sheets)
A new Trimmer – the TR90+ has also been introduced in order to handle the extra capacity.
With precision folding, very accurate stapling and the optional trimmer to neaten the edges, the
SR90 is suitable for the most demanding professional CRD/PFP user. The SR90 can run at the
full engine speed of the IS2090/105, although this depends on the sizes of the booklets. An
optional colour cover interposer is also available for adding extra, colour-printed covers after
the fusing process.
NEW
BF90+ Book Folder (Option)
• Optional Book folder for
perfect bind look.
TR90+ Trimmer (Option)
• Optional trimmer that
trims the front edge of
the booklet to finish the
booklet more
professional.
January 2005
CF90 Cover feeder (Option)
• To add colour covers to
the booklets.
SR90+ Booklet maker
• Folding up to 20 sheets
(for 80 page booklets).
-3-
infotec
Product Launch Information
HV Accessories
BF90+ BOOK FOLDER
This amazing new option is called “Book folder”. The Book folder has a new-patented
technology offered by Plockmatic, giving the booklet the appearance of a perfect bound book.
This also gives you the option to have text printed on the spine (only when it has been preprinted on the cover).
The Book Folder offers an alternative for customers who want glue binding, providing a more
durable finish.
This is part of Ricoh’s concept to offer more complete and better on-line finishing than other
competitive machines in this segment. It is no doubt a revolution in the industry that will give
you the edge over the competition and increase the sales.
Key Features & Sales Points
To Provide a unique solution in combination with SR90+
-
Looks professional like a magazine/book.
-
Easy to stack.
-
Takes up less than 1/3 of the volume of ordinary booklets when stacked.
Standard Booklets
Booklets finished with
the Book Folder
The Book folder gives the book a square formed spine
-
The spine is printable and hence the booklet is easy to find on the shelf.
-
Easy to read, as the booklet stays flat when opened.
January 2005
-4-
infotec
Product Launch Information
HV Accessories
The Book folder binding has a huge price advantage
-
Copy shops charge over £1 for a perfect bound booklet. The Book folder would allow them
to reduce that substantially / to increase their margin, and attract more customers /
alternatively earn more.
-
No special covers or other materials needed.
Communication with SR90
-
The Book folder will receive set size information from the SR90 to optimise the pressure on
the booklet.
The Book folder is better for the environment
-
No odours from glue and no hot areas to get burned on.
-
No usage of glue.
-
Glue bound books have to be treated separately by the paper mills when being recycled.
Not so with stapled booklets.
User interface
-
All necessary settings that the operator wants to do on the Book folder will be performed
from the user interface on the SR90 Booklet maker.
-
The same distinct fault codes and a diagnostic system that are used in the SR90 Booklet
maker will be used for the Book folder.
The Interface on the SR90+ allows you to switch the Book folder on and Off and then select
the number of sheets within the booklet to ensure the best finish.
January 2005
-5-
infotec
Product Launch Information
HV Accessories
The Difference between Booklet Finishers and Booklet Makers
There is a difference between the products on the market which are supplied as ‘Booklet
Finishers’ and those described as ‘Booklet Makers’, such as the SR90+. As opposed to the
Booklet Finisher, usually suitable for the more general office application, the Booklet Maker is
dedicated only to booklet production and provides:
•
Exact folding and stapling – which is consistently positioned from the first to the last
booklet produced.
•
User adjustable settings if required
•
Suitability to carry out both very short and very long production runs
•
Ability to handle up to 25 sheets per booklet – i.e. up to 100 pages (most competitors
only offer up to 15 sheets)
•
On line trimming to remove the uneven edge caused by the ‘creep’ effect when booklets
contain several pages – up to 10 mm can be trimmed off the front edge.
•
The ability to use the Booklet Maker off-line by manual feeding allowing full colour
booklets to be made
The SR90 and SR90+ have a number of improvements over their predecessor – the
SR85:
•
Higher pressure folding for a sharper result
•
Improved stapling system for a flatter look and higher durability of staple heads
•
More integration with the IS2090/105, so that settings can be made more easily eg A4
and A3 sizes can be selected from the main machine for automatic paper size
adjustment
•
A new anti-jam feature which means that all pages are expelled from the mainframe in
the event of the SR90 stopping
•
A new user interface for inputting operator settings, pre-programming up to 10 jobs and
diagnosing faults via a system of codes.
•
No requirement for operators to change settings manually
•
A higher unit life of 2,000,000 booklets
•
Ability to handle more paper sizes (A4,A3,8.5x11”,8.5x14”,11x17” and custom sizes)
and weights from 64 to 240gsm
•
Operation in 13 different languages
Recommended volumes (based on booklets of 4 sheets = 16 pages):
Unit life
2 Million Booklets (this is based on units of booklets and is
independent of the number of sheets per booklet)
ACV
Max CV
Duty Cycle
EM rate
PM cycle
MTTR
Shutdown
Installation Time
20% of recommended engine volume
33,300 (max 2,000,000)
20% of Engine CV
83,000 booklets (based on no. booklets, not pages)
100K Booklets (based on no. booklets, not pages)
1 hour or less
1 / 500 Booklet or less
1 hour or less
January 2005
-6-
infotec
Product Launch Information
HV Accessories
GBC STREAMPUNCH
The GBC StreamPunch is an online finishing solution for the IS2090 / IS2105 and in the future
the IS2160 / IS2175. The GBC StreamPunch provides online hole punching using one of 6
interchangeable die sets, allowing for different binding methods to be used based on various
market standard punch patterns.
The GBC StreamPunch is installed between the copier mainframe and the finisher unit. Paper
punching is only possible on A4 size portrait mode (Long Edge Feed).
GBC StreamPunch
Key features:
.
• On-Line Production Punching System
.
• Operates at the touch of a button
.
• Punches A4 paper at rated at MFP engine speed
.
• Supports 80 gsm to 216 gsm Cover stock
.
• Supports up to 6 customer changeable Die Sets
The StreamPunch is manufactured at GBC in Chicago. GBC is a leading supplier in document
finishing, providing a comprehensive array of equipment and supplies. GBC pioneered the use
of document finishing in the office.
The company was founded in 1947 and headquartered in Chicago. Annual sales total $800M.
GBC employs 5.000 staff worldwide. Sales & Marketing teams are located in Benelux, UK,
Germany, Italy, France, Sweden, Spain, and Switzerland
January 2005
-7-
infotec
Product Launch Information
HV Accessories
Key Benefits and Selling Points
Reduction of labour cost
The main advantage for the customer lies in the reduction of labour costs. This will result in a
quick Return on Investment
Shorter Turnaround Time
Because all production steps are kept in-house, a shorter turnaround time will be achieved.
Elimination of Pre-punched Paper
Another cost saving lies in the fact that the StreamPunch eliminates the need for pre-punched
paper. Limitations of pre-punched paper include:
¾ Pre-punched paper types can only be purchased from limited suppliers (e.g.
Xerox) and is therefore significantly more expensive. e.g. 21 hole pre-punched
paper is almost 2.5 times more expensive than regular paper.
¾ Only limited types of pre-punched paper are available. For many binding styles,
no pre-punched is available at all.
¾ Due to it’s the manufacturing process, pre-punched paper releases more paper
dust. The increase in paper dust in the machine will increase the chance of
machine malfunction.
Added value for PFP and CRD Services
Punched Booklets lay flat. Wire bind, plastic comb bind and coil bind documents are
designed to lay flat, making them very desirable for presentations and course materials. This
provides newly added value to the PFP or CRD services.
Major selling points
¾ Additional revenue opportunities for IS2090/2105 and IS2160/2175 customers.
¾ Cost-effective alternative to higher priced online punching systems currently
utilized on other high-end production systems like DocuTech and DigiMaster
with their Fusion Punch device.
¾ Gives the Ricoh Family Group a competitive lock out edge in both the
workgroup and the production environment.
¾ Gives the customers additional finishing options other than standard 2 and 4
hole punching currently offered on our equipment.
January 2005
-8-
infotec
Product Launch Information
HV Accessories
Marketing Approach
With the IS2090 / 2105 we can expand our target market upward, to now include the low
volume DocuTech territory.
In addition to online Booklet making and 4 hole punching with standard stapling options,
the Pay for Print and CRD market are requesting the capability to create documents that
can be punched and then secured by various types of binding materials such as wire bind,
plastic spines and spirals. These types of binds are widely used in the market because they
provide the ability to produce a product that lies completely flat and allows more of the
printed document to be utilized.
The GBC StreamPunch will differentiate IS2090 / 2105 from other competitor products in
segment 5, which will result in a stronger product offering for PFP and CRD customers.
Compared to the Xerox Docutech Gluebinding system, the StreamPunch offers a cost effective
and more flexible solution for creating booklets. This will enable you as dealers to develop a
strong proposition in vertical markets like education, manufacturing.
Key Marketing Objectives
To provide a binding solution that meets the need of professional users in CRD/PFP.
Strengthen Infotec’s position in segment 5 by expanding the finishing solutions.
To differentiate ourselves from the competition by offering a better selection of on line
finishing solutions and thus increase sales opportunities with this option.
In addition to online Booklet making and punching with standard stapling options, customers
demand the capability to create documents that could be punched and then secured by either
a “GBC” or “Spiral” type bind.
January 2005
-9-
infotec
Product Launch Information
HV Accessories
Positioning
Competitors
Xerox DocuTech NP135 Fusion Punch, DocuTech 6100 Fusion Punch, DocuTech 6115 Fusion
Punch, DocuTech 6135 Fusion Punch, DocuTech 6155 Fusion Punch, DocuTech 6180 Fusion
Punch, Heidelberg 9110 with Online GBC Punch
Target User Classification
As mentioned, the finishing system is targeted at CRD/PFP environment. In such environment,
off-line hole punching is one of most labour-intensive jobs and CRD/PFP managers have a
strong wish to have it automated. In such environments the numbers of HV copier devices are
usually limited and so they cannot afford to assign one as a dedicated booklet-making copier.
Die sets
The interchangeable Die sets are options to the GBC StreamPunch.
Die-sets must be ordered separately. The StreamPunch does not include any Diesets. When no Die set is installed, the unit will still be able to run in bypass mode.
Beside the installation of 1 die-set, the StreamPunch provides convenient
storage area for three extra Die Sets located above the sheet bypass.
Currently there are 6 different Die sets available. Each Die set corresponds
with a certain punching style.
Custom Die sets could be developed by GBC upon request, but this would be chargeable.
January 2005
- 10 -
infotec
Product Launch Information
HV Accessories
Available Die sets
6 different interchangeable die sets are available for different binding styles. By selecting the
appropriate die set, the StreamPunch can punch documents in any of the binding styles
indicated in table below.
Description
Application
4 Hole Die Set, International
Standard Ring applications Binder
VB Die Set, International 12 hole
VeloBind applications
PB Die Set, International 21 hole
Standard “GBC” type applications
W2 Die Set, International 23 round hole
WireBind applications
W3 Die Set, International 34 round hole
WireBind applications
C4 Die Set, International 47 hole
Colour Coil applications
Punching Patterns
Please note that each of
these punching styles
require a separate die set for
the StreamPunch.
The StreamPunch can hold
up to four Die Sets within its
cabinet (one in the operating
slot and three in the storage
area.
January 2005
- 11 -
infotec
Product Launch Information
HV Accessories
Supplies and Off-line Binding Equipment
To coincide with the GBC StreamPunch product launch, Infotec have formed a partnership
with GBC. This allows us to supply you all binding supplies and binding equipment so that
you can offer your customers a total finishing solution
PLEASE LOOK OUT FOR FURTHER INFORMATION REGARDING AVAILABILITY OF
BINDING MACHINES AND SUPPLIES
Binding Styles and Products
Binding supplies consists of materials such as binding spirals (twin loop wire), plastic spines
(plastic comb).
Binding supplies
Offline binding equipment
Binding equipment are tools or machines to bind the document together in a booklet. The
binding process is performed offline
Twin loop wire is the traditionally dominant binding style in the print finishing trade. Plastic
comb binding is also a major binding style, being the main style used in the office. Thermal
binding is relatively strong in Germany, Holland & Switzerland, but is declining whilst comb &
wire are maintaining their volumes.
Other binding styles are considerably smaller and are more ‘user’ specific. Velobinding is a
dominant style with the legal profession. Coil is still a small part of the business but has
significant USPs over wire and plastic comb - not crushable, long lasting. Coil is rapidly
becoming a widely accepted binding style.
IbiClick is a polypropylene, re-openable binding style that has not yet been launched in the
FM sector. It is now increasing significantly in volumes in the office channel, although the
maximum sheet capacity is currently 95 sheets
January 2005
- 12 -
infotec
Product Launch Information
HV Accessories
Binding Trends in Europe.
Benelux, as Germany and Switzerland, has a good thermal binding tradition, especially
‘bespoke’ (pre-printed), but it is still not as big as wire & comb.
Germany has also strong thermal binding history but wire is very strong. There is also a
high penetration of strip binding.
UK is a strong wire and plastic comb market; dominated by GBC, with James Burn also a
significant player, but in wire only.
Thermal covers are less popular except in bespoke thermal covers
France as other countries, is strong in comb and wire.
The Scandinavian markets are small but with a high penetration of printers
and binding equipment
Swiss market is small, but with high relative potential. Thermal is also quite
strong
Italy is a strong wire binding market with a strong national manufacturer,
Rilecart.
Spain has uniquely a 5:1 pitch metal coil market. This style being dominant in this country.
This market, is traditionally a manual market and relatively small.
Main suppliers in the Binding Solutions Market
Manufacturer
Soho
Desk side
office
Centralized
in house
Facilities
management
Copy
shops
Commercial
Print for pay
GBC
Widest market coverage with the
widest portfolio
Y
Y
Y
Y
Y
Y
Acco (Rexel)
Binding sold in addition to their
stationery manufacturing business
Y
Y
N
N
N
N
Fellowes
Binding sold in addition to their
stationery manufacturing business
Y
Y
N
N
N
N
Esselte (Leitz)
Binding sold in addition to their
stationery manufacturing business
Y
Y
N
N
N
N
Renz
Specialists in Automated
Wire solutions.
No focus in other areas.
N
N
Y
Y
Y
Y
Rilecart
A wire specialist, focusing
on automated systems
N
N
Y
Y
Y
Y
James Burn
Specialist in wire element
manufacture with a small
range of machines.
N
N
Y
Y
Y
Y
January 2005
- 13 -
infotec
Product Launch Information
HV Accessories
Targeted Reliability
Module life
Jam occurrence:
Maintenance rates:
10 million paper passes through the bypass paper path
5 million paper passes through the punch paper path.
Each die set shall be durable 500,000 punches
Less than 1/4000 paper passes through the Product. Less than 1/2000
paper passes through the punch paper path.
The paper passes between unscheduled maintenance calls shall be more
than 200,000 paper passes through the Product. The paper passes
between unscheduled maintenance calls shall be more than 100,000 paper
passes through the punch paper path.
MTTR
1 Hour or less
Installation Time
1 hour or less
Remark:
There will be an upgrade kit available. The upgrade kit doubles the lifetime of the StreamPunch
by replacing wearable parts.
StreamPunch Option Combinations
OPTION
SR840
SR841
SR860
GBC Stream Punch
YES
YES
Without Z Folder
NO
•
Note that the PlockMatic Booklet maker, the SR90, will still work. It runs independent
from the StreamPunch after the finishing unit.
•
Note that the Z-fold unit will not work with the StreamPunch.
User interface
The user interface consists of 1 operation panel on the StreamPunch. The operation panel will
also display distinct fault codes and a diagnostic system.
LED indications:
•
•
•
•
•
•
PAPER JAM: Indicates there is a paper jam.
CHIP TRAY FULL/OUT: Indicates the chip tray should be emptied, is missing or
improperly installed.
PUNCH ENABLED: Indicates the system is in the punch mode.
CHECK DIE SET: Indicates a Die Set is not installed properly.
CLOSE DOOR: Indicates the access door is not properly closed.
POWER: Indicates the machine is plugged in, the POWER is on.
January 2005
- 14 -
infotec
Product Launch Information
HV Accessories
CONFIGURATION AND PART NUMBERS
ITEM
Finisher SR841
(100 sheet Stapler)
PART No.
890 202 35
COMMENTS
Stapler finisher – staples up to 100 sheets per
document – total capacity = 3,000 sheets
For Z-folding A3 pages into an A4 document or A4
pages into an A5 Document.
Z-Folding Unit – Type 2105
890 202 34
N.B.Can only be fitted with the SR841 finisher on the
IS2090 / IS2105 or the SR861 Finisher with the IS2151
/ IS2160 / IS2175 machines.
The Z-Folder cannot be fitted with the
StreamPunch only one can be installed
Plockmatic Booklet finisher – requires the SR840 or
SR841 finisher to be fitted
Booklet Finisher SR90+
890 201 79
Rail Unit SR85
889 784 23
Trimmer TR90+
890 201 77
Produces A4 or A5 folded, saddle-stitched booklets
with up to 25 sheets (ie up to 100 pages) – can also
handle paper sizes: 8.5x11”, 8.5x14” and 11x17”
Requires and SR840-1 finisher and a Rail Unit 90, as
well as at least 2 cartridges of staples type X and
Operator instructions
The Rail Unit is required with the SR90 to enable the
operator to alternate between the 2 finishers – SR90
and the SR840-1
The Trimmer Unit is used to trim 2-10 mm from the
front edge of the booklets – optional extra with the
SR90
Book Folder BF90+
Cover Feeder CF90
890 201 78
Staple X
for SR90+/SR90/SR85
885 969 32
Colour Cover Feeder for the SR90+ finisher – capacity
up to 200 sheets, can handled the same paper sizes
as the SR90+
1x 5,000 – Booklet staples 2 cartridges required at a
time
GBC Stream Punch Unit
890 202 42
GBC StreamPunch Unit – Can only be fitted with the
SR840 or SR841 finishers
Available with a choice of 6 different Interchangeable
Die sets – At least 1 Die set must be ordered
separately with the StreamPunch.
The StreamPunch cannot be fitted with the ZFolder only one can be installed
4 Hole Die Set
890 303 04
Standard Ring Binder
12 Hole VB Die Set
890 303 05
VeloBind applications
21 Hole PB Die Set
890 303 06
Standard “GBC” type applications
23 Hole Round W2 Die Set
890 303 07
WireBind applications
34 Hole Round W3 Die Set
890 303 08
WireBind applications
47 Hole C4 Die Set
890 303 09
Colour Coil applications
January 2005
- 15 -
infotec
Product Launch Information
HV Accessories
PRODUCT SPECIFICATIONS
Z folding unit
Please note that the Z-folding Unit can only be attached with the SR841 Finisher on the
IS2090 / IS2105 or the SR861 finisher on the IS2151 / IS2160 / IS2175.
As shown below, paper is delivered face down, with the feeding-edge is folded.
Paper feeding direction
Z-folding
unit
Finisher
Item
Dimension (W x D x H)
Weight
Power consumption
Noise (Power level)
Configuration
Paper size
Face down
Specification
177 x 620 x 960 mm
Less than 55kg
Less than 100W
Less than 74dB
Console type attached mainframe
A3, B4, A4 SEF, 11” x 17”, 8 ½” x 14”, 8 ½” x 11” SEF
Z folding unit – Limitations
1.
The following types of paper cannot be Z-folded.
-Translucent paper
-OHP transparencies
-Label paper (adhesive labels)
-Tab stock
-Thick paper
-Paper of low stiffness
2.
Z-fold and punch cannot be used at the same time.
3.
Z-folding unit and Cover Interposer can be installed together, but paper inserted from
Cover Interposer cannot be Z-folded.
4.
Depending on the folding direction, rotated copy cannot be used together.
January 2005
- 16 -
infotec
Product Launch Information
HV Accessories
BOOKLET MAKER SR90+
Item
Specification
Speed (Online usage)
Generally maintains engine speed (90 or 105 ppm)
Actual speed in number of booklets per minute depends on number of sheets
per booklet
Maximum Speed
50 booklets / Min (A4), 33 /Min (A3) – based on off line usage
Standard Paper Sizes
A4, A3, 8.5x11”, 8.5x14” & 11x17”
(custom sizes are available)
Paper Weight
(Minimum)
64gsm/17 lb. Bond
Paper Weight
(Maximum)
240gsm/135 lb. Index/ 90 lb. Cover
engine duplex – 163 gsm
Input / Output Sheets
2 – 25 Sheets (80 gsm / 20 lb. Bond, equivalent) – equates to 100 pages
Input / Output Sheets
2 Sheets – non stapled folding
Off-line Use
Possible
Weight
81 kg / 178,2 lb. or less
Dimensions
1370 mm x 810 mm x 620 mm (L x H x D) – includes base and stacker
Power Source
100/110/115/127/220/230 50-60Hz (+-10%)
Power consumption
200 W or less
Target Shut Down
1 / 500 booklets or less, equates to 1/4000 copies
(ie paper/staple jam)
Fold Skew
0.7 mm (A4), 1.0 mm (A3)
Fold Variation
0.5 mm
Fold Quality
Less than 17 mm (A3, 80gsm, 4 Sheets)
Maximum height per set (depends on paper used)
Stapled Set
Registration
0.7 mm Maximum
Staple Line Position
variation
Less than 0.5 mm
Physical Connection to
IS2090/105
Attached after SR840-1 (detachable)
Attach by bracket (docking unit)
Released by foot release
Electrical Connection
to IS2090/105
January 2005
Jam signal to stop IS2090/105 (Hard stop)
Jam signal to stop IS2090/105 (Soft stop)
Set Signal from IS2090/105 to start SR90/105
Paper size information from IS2090/105
(Four types of paper size information: A3SEF / A4SEF / DLT SEF / LTSEF )
- 17 -
infotec
Product Launch Information
HV Accessories
TRIMMER TR90+
Item
Specification
Speed
Same as SR90+
Standard Paper Sizes
Same as SR90+ (custom sizes are available)
Default trim length
4,5 mm / (11/64”) (adjustable in 0.5 mm steps)
Minimum trimming
0,5 mm / (1/64”) (adjustable in 0.5 mm steps)
Maximum trimming
12,5 mm / (0,5”) (adjustable in 0.5 mm steps)
Paper Weight
(Minimum)
Same as SR90+
Engine duplex 64 gsm
Paper Weight
(Maximum)
Same as SR90+
Engine duplex 163 gsm
Input / Output Sheets
Same as SR90+
Input / Output Sheets
Same as SR90+
Off-line Use
Possible
Stitch/Fold/Side Bind (2 staples)
Weight
57 kg/ 125,4 lb. or less
Dimensions
360 mm x 880 mm x 620 mm (L x H x D)
Ind base and stacker
Power Source
From SR90+
COVER FEEDER CF90
Item
Specification
Maximum Speed
Same as SR90+
Standard Paper Sizes
Same as SR90+
Paper Weight (Min)
70 gsm/ 18 lb. Bond
Paper Weight (Max)
Same as SR90+
Cover Feeder Capacity
20 mm (approx 200 sheets of 80gr/m2 paper
Off-line Use
Possible – Stitch/Fold/Side Bind (2 staples)
Weight
12.5 kg/ 27,5 lb. or less
Dimensions
645 mm x 188 mm x 560 mm (L x H x D)
Inc base and stacker and CF90
Power Source
From SR90+
January 2005
- 18 -
infotec
Product Launch Information
HV Accessories
BOOK FOLDER BF90+
Item
Speed (Online usage)
Specification
2 A4/8,5x11” sheets from the copier 800 books/hr - Maintain engine speed of
SR90
2 A3/11x17” sheets from the copier 500 books/hr - Maintain engine speed of
SR90
Maximum Speed
50 booklets / Min (A4), 33 /Min (A3) - (Off line usage)
Standard Paper Sizes
A4, A3, 8.5x11”, 8.5x14” & 11x17” - Custom sizes are available (SR90)
Paper Weight (Min)
64gsm/17 lb. Bond - Engine Duplex : 64 gsm
Paper Weight (Max)
240gsm/135 lb. Index/ 90 lb. Cover - Engine Duplex: 163 gsm
Input / Output Sheets
2 – 20 Sheets (80 gsm / 20 lb. Bond, equivalent) - Stapled
Input / Output Sheets
2 Sheets - Non Stapled Folding
Booklet Thickness
It is possible for the Square folder to automatically adjust the pressure to
optimize the fold.
Off-line Use
Yes - Stitch/ Fold (2 staples)
Weight
46 Kg.
Dimensions (LxHxD)
360mm x 880mm x 620 mm - Book folder only
Power Source
105/115/125/220/230/240 50-60Hz - + - 10%
Power consumption
200 W or less - Continuous Operations
Functional Remarks
Soft stop
The Booklet maker can send a soft stop to the Bellini2.
Definitions:
• Soft stop with auto restart: After job is interrupted as soft stop, machine will continue
automatically, this means without human intervention.
• Soft stop with manual restart: After job is interrupted human intervention to restart is
required.
January 2005
- 19 -
infotec
Product Launch Information
HV Accessories
BOOK FOLDER BF90+ - Cont’d
Jam Conditions
All jam conditions will be shown as a fault code in the user interface.
If paper is causing a jam it will be shown as a fault code and a figure where the paper is located
in the machine on the user interface.
Fault Codes
The fault codes are shown as Product code + Number.
Product Codes
BM
TR
CF
ST
BF
Product
SR90Booklet maker / Feeder
TR90 Trimmer
CF90 Cover Feeder
Belt stacker
BF90 Book folder
Numbers:
001-199 Component failures
001-149 Components
150-199 Power
201-299 Jam conditions
201-249 Internal
250-299 External
301-399 Not ready (covers, interlocks)
401-499 Full / Empty conditions
501-599 Early warnings, example waste bin near full.
601-699 Warnings, information only registrated in the fault history.
Example:
Fault code TR-422:
“TR” indicates the Trimmer, and the 4xx series says “Full / Empty conditions”. In this case the
fault code TR-422 means “Trimmer waste bin full”.
January 2005
- 20 -
infotec
Product Launch Information
HV Accessories
GBC StreamPunch
Item
Speed (Online Usage)
Specification
Full A4 Engine Speed
A4
Paper Sizes
NB - Other paper sizes can be fed through in bypass mode and will not
be punched
Paper weight (Minimum)
75 gsm
Paper Weight (maximum)
216 gsm
Off Line Use
Not Possible
Weight (Stream Punch)
69.85 kg
Dimensions (Stream Punch)
978 X 724 305mm
Weight (Die Set)
2.27 kg
Dimensions (Die Set)
140 X 191 X 546mm
Power Source
220-240V 50HZ
Power Consumption
340W
PC Control of the
StreamPunch
There will be no driver support using any connectivity options The
StreamPunch is manually activated.
Engine Productivity
The system maintains full engine speed.
Communication with copier
There is no direct communication with the copier mainframe.
Paper orientation
The image rotation function of the 2090 and 2105 printers must be
used to have the document punched on the proper side when it is
placed in the feed tray in its normal face up position. This can be set
and saved in this configuration.
Other paper sizes then A4
portrait
The punch unit only punches A4 portrait. Feeding of other paper sizes
will result in paper jams in the StreamPunch and copier. The
StreamPunch will not switch automatically back into bypass mode. The
StreamPunch is not able to detect the paper size.
Mainframe connection
The StreamPunch is installed between the copier mainframe and the finisher (SR840 or SR841).
Installation must be carried out by an engineer.
Remarks
Description
Physical
Connection
Electrical
Connection
January 2005
Attached between the
mainframe and the Finisher
Finisher can be SR840 or Sr841
No electrical connection
between StreamPunch and
Mainframe or Finisher
a) Jam signaling is done via timing on the finisher.
b) During installation a longer cable must replace the
standard cable between Mainframe and finisher.
Longer cable is included with StreamPunch.
c) EPROM in Finisher must be replaced.
New EPROM is supplied with Stream Punch
- 21 -
infotec
Product Launch Information
HV Accessories
Standard Accessories
EPROM for finisher
To install in SR840 / SR841 finisher.
Communication cable
Between SR840 and copier mainframe
Power cord
For StreamPunch
January 2005
- 22 -
NOTES
NOTES
Danka Office Products BV
Catherine House, Three Cherry Trees Lane, Hemel Hempstead, Herts, HP2 7RP
Tel: 01442 415550 Fax: 01442 415566
Email: hheath@infotecdealer.co.uk
www.infotec-dealer.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising