2017 Chrysler Pacifica User`s Guide

2017 Chrysler Pacifica User`s Guide
Whether it’s providing information about specific
product features, taking a tour through your vehicle’s
heritage, knowing what steps to take following an
accident, or scheduling your next appointment, we
know you’ll find the app an important extension of
your Chrysler vehicle. Simply download the app,
select your make and model and enjoy the ride.
To get this app, go directly to the App
Store or Google Play and enter the search
keyword “Chrysler” (U.S. market only).
Chrysler.com/EN/Owners provides special
offers tailored to your needs, customized vehicle
galleries, personalized service records and more.
To get this information, just create an account
and check back often.
Download a FREE electronic copy of the
Owner’s Manual or Warranty Booklet by visiting:
www.mopar.com/chrysler,
www.chrysler.com/en/owners/manuals or
www.chrysler.com/en/warranty (U.S.);
www.owners.mopar.ca/en (Canada).
chrysler.com/pacifica (U.S.)
chrysler.ca/pacifica (Canada)
©2017 FCA US LLC. All Rights Reserved.
Chrysler is a registered trademark of FCA US LLC.
1 7 R U - 9 2 6 - A A • PA C I F I C A
SEVENTH EDITION REV 1 • USER GUIDE
T H E C H RYS L ER
PACIFICA 2017 USER GUIDE
IF YOU ARE THE FIRST REGISTERED RETAIL OWNER OF YOUR VEHICLE, YOU
MAY OBTAIN A COMPLIMENTARY PRINTED COPY OF THE OWNER’S MANUAL,
NAVIGATION/UCONNECT MANUALS OR WARRANTY BOOKLET BY CALLING
1 800 247-9753 (U.S.) OR 1 800 387-1143 (CANADA) OR BY CONTACTING
YOUR DEALER.
The driver’s primary responsibility is the safe operation of the vehicle. Driving while distracted can
result in loss of vehicle control, resulting in a collision and personal injury. FCA US LLC strongly
recommends that the driver use extreme caution when using any device or feature that may take
their attention off the road. Use of any electrical devices, such as cellular phones, computers,
portable radios, vehicle navigation or other devices, by the driver while the vehicle is moving is
dangerous and could lead to a serious collision. Texting while driving is also dangerous and should
never be done while the vehicle is moving. If you find yourself unable to devote your full attention
to vehicle operation, pull off the road to a safe location and stop your vehicle. Some states or
provinces prohibit the use of cellular telephones or texting while driving. It is always the driver’s
responsibility to comply with all local laws.
I M P O R T A N T: This User Guide is intended to familiarize you with the important
features of your vehicle. Your Owner’s Manual, Navigation/Uconnect Manuals and Warranty
Booklets can be found on your DVD (if applicable) or by visiting the website on the back cover
of your User Guide. We hope you find it useful. U.S. residents can purchase replacement kits
by visiting www.techauthority.com and Canadian residents can purchase replacement kits by
calling 1 800 387-1143.
This guide has been prepared to help you get quickly acquainted with your new Chrysler
Brand Vehicle and to provide a convenient reference source for common questions. However, it
is not a substitute for your Owner’s Manual. For complete operational instructions, maintenance
procedures and important safety messages, please consult your Owner’s Manual, Navigation/
Uconnect Manuals and other Warning Labels in your vehicle. Not all features shown in this
guide may apply to your vehicle. For additional information on accessories to help personalize
your vehicle, visit mopar.com (U.S.), mopar.ca (Canada) or your local Chrysler brand dealer.
D R I V I N G A N D A L C O H O L : Drunken driving is one of the most frequent
causes of collisions. Your driving ability can be seriously impaired with blood alcohol levels
far below the legal minimum. If you are drinking, don’t drive. Ride with a designated
non-drinking driver, call a cab, a friend, or use public transportation.
WARNING!
Driving after drinking can lead to a collision. Your perceptions are less sharp, your
reflexes are slower, and your judgment is impaired when you have been drinking.
Never drink and then drive.
TA B L E O F CO N T E N T S
INTRODUCTION
WELCOME FROM FCA US LLC
ELECTRONICS
. . . . . . . 3
CONTROLS AT A GLANCE
DRIVER COCKPIT . . . . . . . . . . . . . . . 6
INSTRUMENT CLUSTER . . . . . . . . . . . 8
GETTING STARTED
VEHICLE USER GUIDE (U.S. MARKET
ONLY) — IF EQUIPPED . . . . . . . . . . . . 10
KEY FOB . . . . . . . . . . . . . . . . . . . . 12
REMOTE START — IF EQUIPPED . . . . . . 17
VEHICLE SECURITY ALARM . . . . . . . . 17
KEYLESS ENTER-N-GO — PASSIVE
ENTRY . . . . . . . . . . . . . . . . . . . . . 18
HANDS-FREE SLIDING DOOR AND
LIFTGATE . . . . . . . . . . . . . . . . . . . 19
KEYLESS ENTER-N-GO — IGNITION . . . 22
OCCUPANT RESTRAINT SYSTEMS . . . . 23
HEAD RESTRAINTS . . . . . . . . . . . . . 66
FRONT SEATS . . . . . . . . . . . . . . . . . 70
REAR SEATS . . . . . . . . . . . . . . . . . . 76
HEATED/VENTILATED SEATS . . . . . . . 86
STEERING WHEEL . . . . . . . . . . . . . . 88
OPERATING YOUR VEHICLE
ENGINE BREAK-IN
RECOMMENDATIONS . . . . . . . . . . . 90
HEADLIGHT SWITCH . . . . . . . . . . . . 90
MULTIFUNCTION LEVER . . . . . . . . . . 92
WINDSHIELD WIPER AND WASHERS . . . 93
SPEED CONTROL . . . . . . . . . . . . . . 96
ADAPTIVE CRUISE CONTROL (ACC) . . . 98
FORWARD COLLISION WARNING
(FCW) . . . . . . . . . . . . . . . . . . . . . 102
NINE-SPEED AUTOMATIC
TRANSMISSION . . . . . . . . . . . . . . . 103
STOP/START SYSTEM — IF EQUIPPED . . 105
ELECTRIC PARK BRAKE (EPB) . . . . . . . 108
MANUAL CLIMATE CONTROLS . . . . . 110
AUTOMATIC TEMPERATURE
CONTROLS (ATC) . . . . . . . . . . . . . . 111
PARKSENSE FRONT AND REAR PARK
ASSIST . . . . . . . . . . . . . . . . . . . . . 114
PARKVIEW REAR BACK UP CAMERA —
IF EQUIPPED . . . . . . . . . . . . . . . . . 116
SURROUND VIEW CAMERA SYSTEM —
IF EQUIPPED . . . . . . . . . . . . . . . . . 117
BLIND SPOT MONITORING . . . . . . . . 119
TRI-PANE PANORAMIC SUNROOF —
IF EQUIPPED . . . . . . . . . . . . . . . . . 120
WIND BUFFETING . . . . . . . . . . . . . . 123
YOUR VEHICLE'S SOUND SYSTEM . . . 124
CYBERSECURITY . . . . . . . . . . . . . . 126
IDENTIFYING YOUR RADIO . . . . . . . . 127
UCONNECT ACCESS . . . . . . . . . . . . 127
UCONNECT 5.0 . . . . . . . . . . . . . . . 140
UCONNECT 5.0 VOICE RECOGNITION
QUICK TIPS . . . . . . . . . . . . . . . . . . 144
UCONNECT 8.4/8.4 NAV . . . . . . . . . . 151
UCONNECT 8.4/8.4 NAV VOICE
RECOGNITION QUICK TIPS . . . . . . . . 164
UCONNECT PHONE . . . . . . . . . . . . 180
UCONNECT THEATER — IF EQUIPPED . 190
STEERING WHEEL AUDIO CONTROLS . 202
AUX/USB/MP3 CONTROL . . . . . . . . . 203
INSTRUMENT CLUSTER DISPLAY . . . . 204
PROGRAMMABLE FEATURES . . . . . . . 205
GARAGE DOOR OPENER —
IF EQUIPPED . . . . . . . . . . . . . . . . . 206
POWER INVERTER — IF EQUIPPED . . . 209
POWER OUTLETS . . . . . . . . . . . . . 209
UTILITY
STOW ‘N VAC INTEGRATED VACUUM —
IF EQUIPPED . . . . . . . . . . . . . . . . . 212
TRAILER TOWING WEIGHTS (MAXIMUM
TRAILER WEIGHT RATINGS) . . . . . . . 219
RECREATIONAL TOWING (BEHIND
MOTORHOME, ETC.) . . . . . . . . . . . . 219
WHAT TO DO IN EMERGENCIES
ROADSIDE ASSISTANCE . . . . . . . . . . 221
WARNING/INDICATOR LIGHTS AND
MESSAGES . . . . . . . . . . . . . . . . . . 222
IF YOUR ENGINE OVERHEATS . . . . . . 230
TIRE SERVICE KIT — IF EQUIPPED . . . . 231
JACKING AND TIRE CHANGING —
IF EQUIPPED . . . . . . . . . . . . . . . . . 237
JUMP STARTING . . . . . . . . . . . . . . 249
MANUAL PARK RELEASE . . . . . . . . . . 252
TOWING A DISABLED VEHICLE . . . . . 253
FREEING A STUCK VEHICLE . . . . . . . 255
ENHANCED ACCIDENT RESPONSE
SYSTEM (EARS) . . . . . . . . . . . . . . . 256
EVENT DATA RECORDER (EDR) . . . . . 256
TA B L E O F CO N T E N T S
MAINTAINING YOUR VEHICLE
HOOD . . . . . . . . . . . . . . . . . . . .
ENGINE COMPARTMENT — 3.6L . . . .
FLUID CAPACITIES . . . . . . . . . . . .
FLUIDS AND LUBRICANTS . . . . . . . .
MAINTENANCE PROCEDURES . . . . .
SCHEDULED SERVICING . . . . . . . .
FUSES . . . . . . . . . . . . . . . . . . . .
ADDING FUEL . . . . . . . . . . . . . . .
TIRE SAFETY INFORMATION . . . . .
TIRES — GENERAL INFORMATION . . .
DEPARTMENT OF TRANSPORTATION
UNIFORM TIRE QUALITY GRADES . .
REPLACEMENT BULBS . . . . . . . . . .
.
.
.
.
.
.
.
.
.
.
257
260
262
262
264
264
269
278
280
287
. 295
. 297
CONSUMER ASSISTANCE
FCA US LLC CUSTOMER CENTER . . .
FCA CANADA INC. CUSTOMER
CENTER . . . . . . . . . . . . . . . . . .
ASSISTANCE FOR THE HEARING
IMPAIRED . . . . . . . . . . . . . . . . .
PUBLICATIONS ORDERING . . . . . .
REPORTING SAFETY DEFECTS IN THE
UNITED STATES . . . . . . . . . . . . . .
. 298
. 298
. 298
. 298
. 299
MOPAR® ACCESSORIES
AUTHENTIC ACCESSORIES
BY MOPAR . . . . . . . . . . . . . . . . . . 300
FAQ’S
FREQUENTLY ASKED QUESTIONS . . . . 301
INDEX . . . . . . . . . . . . . . . . . . . 302
2
INTRODUCTION
WELCOME FROM FCA US LLC
Congratulations on selecting your new FCA US LLC (“FCA US”) vehicle. Be assured that it
represents precision workmanship, distinctive styling, and high quality.
Your new FCA US vehicle has characteristics to enhance the driver's control under some driving
conditions. These are to assist the driver and are never a substitute for attentive driving. They can
never take the driver's place. Always drive carefully.
Your new vehicle has many features for the comfort and convenience of you and your passengers.
Some of these should not be used when driving because they take your eyes from the road or
your attention from driving. Never text while driving or take your eyes more than momentarily off
the road.
This guide illustrates and describes the operation of features and equipment that are either
standard or optional on this vehicle. This guide may also include a description of features and
equipment that are no longer available or were not ordered on this vehicle. Please disregard any
features and equipment described in this guide that are not available on this vehicle. FCA US
reserves the right to make changes in design and specifications and/or make additions to or
improvements to its products without imposing any obligation upon itself to install them on
products previously manufactured.
This User Guide has been prepared to help you quickly become acquainted with the important
features of your vehicle. It contains most things you will need to operate and maintain the vehicle,
including emergency information.
The DVD includes a computer application containing detailed Owner's information which can
be viewed on a personal computer or MAC computer. The multimedia DVD also includes videos
which can be played on any standard DVD player (including the Uconnect Touchscreen Radios
if equipped with DVD player capabilities). Additional DVD operational information is located on
the back of the DVD sleeve.
For complete owner information, refer to your Owner's Manual on www.chrysler.com/
en/owners/manuals.
FCA US is committed to protecting our environment and natural resources. By converting from
paper to electronic delivery for the majority of the user information for your vehicle, together we
greatly reduce the demand for tree-based products and lessen the stress on our environment.
3
INTRODUCTION
VEHICLES SOLD IN CANADA
With respect to any vehicles sold in Canada, the name FCA US LLC shall be deemed to be
deleted and the name FCA Canada Inc. used in substitution (excluding legal lines).
WARNING!
• Pedals that cannot move freely can cause loss of vehicle control and increase the risk of
serious personal injury.
• Always make sure that objects cannot fall into the driver foot well while the vehicle is
moving. Objects can become trapped under the brake pedal and accelerator pedal causing
a loss of vehicle control.
• Failure to properly follow floor mat installation or mounting can cause interference with the
brake pedal and accelerator pedal operation causing loss of control of the vehicle.
• Never leave children alone in a vehicle, or with access to an unlocked vehicle. Allowing
children to be in a vehicle unattended is dangerous for a number of reasons. A child or
others could be seriously or fatally injured. Children should be warned not to touch the
parking brake, brake pedal or the transmission gear selector.
• Do not leave the key fob in or near the vehicle, or in a location accessible to children. A child
could operate power windows, other controls, or move the vehicle.
• Never use the ‘PARK’ position as a substitute for the parking brake. Always apply the
parking brake fully when parked to guard against vehicle movement and possible injury or
damage.
• Refer to your Owner's Manual for further details.
USE OF AFTERMARKET PRODUCTS (ELECTRONICS)
The use of aftermarket devices including cell phones, MP3 players, GPS systems, or chargers
may affect the performance of on-board wireless features including Keyless Enter-N-Go and
Remote Start range. If you are experiencing difficulties with any of your wireless features, try
disconnecting your aftermarket devices to see if the situation improves. If your symptoms persist,
please see an authorized dealer.
When it comes to service, remember that your authorized dealer knows your vehicle best, has
factory-trained technicians and genuine MOPAR® parts, and cares about your satisfaction.
4
INTRODUCTION
5
CO N T R O L S AT A G L A N C E
DRIVER COCKPIT
1. Headlight Switch pg. 90
2. Turn Signal/High Beams Lever (behind steering wheel) pg. 92
3. Instrument Cluster Display pg. 204
4. Windshield Wiper And Washers pg. 93
5. Keyless Enter-N-Go — Ignition pg. 22
6. Identifying Your Radio pg. 127
7. Storage Compartment
6
CO N T R O L S AT A G L A N C E
8. Switch Panel
• Park Assist pg. 114
• ParkSense pg. 114
• LaneSense OFF
• Electronic Stability Control (ESC) OFF
9. Climate Controls pg. 111
10. Gear Selector pg. 103
11. Speed Controls pg. 96
12. Instrument Cluster Display Controls pg. 204
13. Driver Seat Memory Settings pg. 72
14. Power Window/Door Lock Switch Panel
7
CO N T R O L S AT A G L A N C E
INSTRUMENT CLUSTER
1. Tachometer
2. Temperature Gauge
3. Instrument Cluster Display
Refer to “Instrument Cluster Descriptions” in “Getting To Know Your Instrument Panel” in your
Owner’s Manual at www.chrysler.com/en/owners/manuals/ for additional instrument cluster
description information.
(See page 222 for more Instrument Cluster Warning Light information.)
8
CO N T R O L S AT A G L A N C E
4. Fuel Gauge
5. Speedometer
(See
page
227
for
more
Instrument
Cluster
Indicator
Light
information.)
9
G E T T I N G S TA R T E D
VEHICLE USER GUIDE (U.S. MARKET ONLY ) —
IF EQUIPPED
Access your Owner’s Information right through your Uconnect 8.4 or 8.4 NAV touchscreen
system — If Equipped. Refer to “Identifying Your Radio” in “Electronics” in this guide to determine
your radio.
To access the Vehicle User Guide on your Uconnect Touchscreen: Press the Uconnect Apps
button, then press the Vehicle User Guide icon on your touchscreen. No Uconnect registration
is required.
NOTE:
Vehicle User Guide features are not available while the vehicle is moving. If you try to access while
the vehicle is in motion, the system will display: Feature not available while the vehicle is in motion.
Pre-Installed Features
•
•
•
•
Your User Guide — Updated in real-time
Touchscreen convenience
Maintenance schedules and information
Comprehensive icon & symbol glossary
•
•
•
Available when and where you need it
Customizable interface
Multilingual
Vehicle User Guide Home Screen
10
G E T T I N G S TA R T E D
Once you launch your Vehicle User Guide, you will be able to explore your warranty information
and radio manual when and where you need them. Your Uconnect radio will display the Vehicle
User Guide on your touchscreen radio to assist in better understanding your vehicle. There’s no
app to download, no phone to connect and no external device needed for playback. Plus, it’s
updated throughout the year, in real-time, so it never goes out of date.
Features/Benefits
• Pre-installed on your Uconnect touchscreen radio
• Enhanced search and browsing capability
• Robust NAV application — If Equipped
• Add selected topics to a fast-access Favorites category
• Icon and symbol glossary
• Warranty information
• Crucial driver information and assistance:
•
•
•
Operating Instructions
Warranty Information
Fluid Level Standards
•
•
•
Maintenance Schedules
Emergency Procedures
911 Contact and More
Tip: When viewing a topic, tap the star icon to add it to your Favorites, for easy access in the
future.
Enhanced Search And Browsing Capability
Icon And Symbol Glossary
11
G E T T I N G S TA R T E D
KEY FOB
Description Of Key Fob
The keyless ignition system consists of a Remote Keyless Entry (RKE) key fob with a built in
emergency key and a Keyless Push Button Ignition system.
NOTE:
Key fob features may vary depending upon
vehicle build options, refer to “Keys” in “Getting To Know Your Vehicle” in the Owner’s
Manual
on
www.chrysler.com/en/owners/manuals for further information.
Locking The Doors With A Key
Fob
Push and release the lock button on the key fob
to lock all doors and liftgate. The turn signal
lights will flash and the horn will chirp to acknowledge the signal.
NOTE:
Refer to “Uconnect Settings” in “Multimedia”
in the Owner’s Manual on www.chrysler.com/
en/owners/manuals for further information to
program your preferred settings for the light
flash and horn chirp functions.
If the vehicle is equipped with Passive Entry,
refer to “Keyless Enter-N-Go — Passive Entry”
in this guide for further information.
Key Fob
1 — Unlock
2 — Lock
3 — Remote Start
4 — Right Power Sliding Side Door
5 — Panic Alarm
6 — Emergency Key
7 — Left Power Sliding Side Door
8 — Liftgate
Key Fob With Remote Control And Integrated Vehicle Key
If one or more doors are open, or the liftgate is open, the doors will lock. This is signaled by a quick
flash of the turn signals.
Vehicles Equipped With Keyless Enter-N-Go — Passive Entry
If one or more doors are open, or the liftgate is open, the doors will lock. The doors will unlock
again only if the key fob is inside the passenger compartment.
NOTE:
• The default lock setting can be changed within Uconnect Settings so that the system will
allow/inhibit the ability to lock the doors when one or more doors/liftgate are open.
• For additional information, refer to “Uconnect Settings” in “Multimedia” in the Owner’s
Manual on www.chrysler.com/en/owners/manuals for further information.
12
G E T T I N G S TA R T E D
Unlocking The Doors With A Key Fob
NOTE:
The key fob unlock procedure is programmable through your “Uconnect Settings” for either of
the following programmable setting:
• 1st press of the key fob unlocks only the driver side passenger entry doors (front/side sliding
doors).
• 1st press of the key fob unlocks “ALL” passenger entry doors and liftgate.
1st Push Of Key Fob Unlocks Driver Side Passenger Entry Doors
Push and release the unlock button on the key fob once to unlock the driver front and driver side
passenger entry doors. The turn signal lights will flash to acknowledge the unlock signal. The
illuminated entry system will be activated.
Push and release the unlock button on the key fob twice within five seconds to unlock all doors
and liftgate. The turn signal lights will flash to acknowledge the unlock signal. The illuminated
entry system will be activated.
1st Push Of Key Fob Unlocks All Passenger Entry Doors And Liftgate
Push and release the unlock button on the key fob once to unlock “ALL” passenger entry doors
and liftgate. The turn signal lights will flash to acknowledge the unlock signal. The illuminated
entry system will be activated.
NOTE:
Refer to “Uconnect Settings” in “Multimedia” in the Owner’s Manual on www.chrysler.com/en/
owners/manuals for further information.
13
G E T T I N G S TA R T E D
Power Liftgate
Unlocking/Enter The Liftgate Using The Key Fob
The power liftgate may be opened by pulling the liftgate release or by using the button on the key
fob. Push the button twice within five seconds to open the power liftgate.
The power liftgate may also be opened by pushing the button located on the overhead console.
NOTE:
• If anything obstructs the power liftgate while
it is closing or opening, the liftgate will automatically reverse to the closed or open position, provided it meets sufficient resistance.
• There are also pinch sensors attached to the
side of the liftgate opening. Light pressure
anywhere along these strips will cause the
liftgate to return to the open position.
• During power operation, whether liftgate is
fully open or fully closed, the liftgate chime
will beep several times indicating power operation is in progress.
Power Liftgate Button
• The power liftgate must be in the full open
or close positions for any of the buttons to operate. If the liftgate is not in the full open or close
positions, it must be opened or closed manually.
• If the liftgate release button is activated while the power liftgate is closing, the liftgate will
reverse to the full open position.
• The power liftgate buttons will not operate if the gear selector is in gear or the vehicle speed
is above 0 mph (0 km/h).
• The power liftgate will not operate in temperatures below −12° F (−24° C) or temperatures
above 143° F (62° C). Be sure to remove any buildup of snow or ice from the liftgate before
pushing any of the power liftgate buttons.
• If the power liftgate encounters multiple obstructions within the same cycle, the system will
automatically stop and must be opened or closed manually.
• In the event of a power malfunction to the liftgate, an emergency liftgate latch release can be
used to open the liftgate. The emergency liftgate latch release can be accessed through a
snap-in cover located on the liftgate trim panel.
• If the liftgate is left open for an extended period of time, the liftgate may need to be closed
manually to reset power liftgate functionality.
14
G E T T I N G S TA R T E D
WARNING!
• Driving with the liftgate open can allow poisonous exhaust gases into your vehicle. You and
your passengers could be injured by these fumes. Keep the liftgate closed when you are
operating the vehicle.
• If you are required to drive with the liftgate open, make sure that all windows are closed, and
the climate control blower switch is set at high speed. Do not use the recirculation mode.
Gas props support the liftgate in the open position. However, because the gas pressure drops
with temperature, it may be necessary to assist the props when opening the liftgate in cold
weather.
Power Sliding Doors
Push the left or right Power Sliding Door button twice within five seconds to power open/close
the Power Sliding Door. If the button is pushed again while the door is being power closed, the
door will reverse to the full open position.
KeySense Features – If Equipped
This feature provides the vehicle owner with the ability to identify a specific vehicle key for which
a customized category of vehicle settings can be applied to determine the driving experience for
other drivers of the vehicle. The vehicle settings are protected by a unique 4-digit PIN, which the
vehicle owner creates when accessing the specific settings for the first time.
This feature also has additional features that
are always enabled when the specific key is in
use that cannot be set by the vehicle owner.
While this specific key is in use, the vehicle will
respond accordingly to the customized vehicle
settings and mandatory features. This includes
enhanced driving assistance features, increased driver alerts, and the locking of certain
optional features.
KeySense Unique Splash Screen
At start-up, the KeySense splash screen should
inform the driver that the vehicle will be functioning in KeySense mode when the KeySense
key is in use.
KeySense Key Fob
1 — Emergency Key
2 — KeySense Key Fob
15
G E T T I N G S TA R T E D
Start Up Instrument Cluster Display Features
• Unique Splash Screen Graphic
• Telltale Illuminated
• After Unique Splash Screen, And After Stored Messages Are Cycled, Then
Start-Up Keysense Messages (Range & Max Speed) Are Displayed.
The following features are always enabled when this key is in use:
• Entertainment Audio Muted If 1st Row Seatbelts Are Not Fastened
• Consistent Seat Belt Unfastened Chime
• Maximum Radio Volume
• Daytime Running Lights
Please refer to “Keys” in “Getting To Know Your Vehicle” in your Owner’s Manual on www.chrysler.com/
en/owners/manuals for further information.
Emergency Key
Should the battery in the vehicle or the key fob go dead, there is an emergency key located in the
key fob that can be used for locking and unlocking the doors. To remove the emergency key, slide
the button at the top of the key fob sideways with your thumb and then pull the key out with your
other hand.
The emergency key is used to unlock/lock the driver's door and the glove compartment.
In case the key fob battery is dead, use the emergency key to open the door. If the vehicle is
equipped with Keyless Enter-N-Go — Ignition, remove the keyless ignition push button by
inserting the metal part of the emergency key under the button bezel at the 6 o’clock position and
gently pry the button loose.
NOTE:
The keyless ignition push button should only be removed or inserted with the ignition in the
LOCK position (OFF position for Keyless Enter-N-Go — Ignition).
With the keyless ignition push button removed, start the vehicle by inserting the emergency key
fob in the ignition and turning to the Start position.
NOTE:
In case the ignition switch does not change with the push of a button, the key fob may have a low
or dead battery. In this situation, a back up method can be used to operate the ignition switch. Put
the nose side of the key fob (side opposite of the Emergency Key) against the ENGINE
START/STOP button and push to operate the ignition switch.
16
G E T T I N G S TA R T E D
REMOTE START — IF EQUIPPED
Push and release the remote start button
on the key fob twice within five seconds. Pushing
the remote start button a third time shuts the engine off.
To drive the vehicle, push the unlock button on the key fob, place the ignition in the ON/RUN
position by pushing the keyless push button.
With Remote Start, the engine will only run for 15 minutes (timeout), unless the keyless push
button ignition is placed in the ON/RUN position.
The vehicle must be started with the keyless push button ignition after two consecutive timeouts.
WARNING!
• Do not start or run an engine in a closed garage or confined area. Exhaust gas contains
Carbon Monoxide (CO) which is odorless and colorless. Carbon Monoxide is poisonous
and can cause you or others to be severely injured or killed when inhaled.
• Keep key fobs away from children. Operation of the Remote Start System, windows, door
locks or other controls could cause you and others to be severely injured or killed.
VEHICLE SECURITY ALARM
The vehicle security alarm monitors the vehicle doors for unauthorized entry and the ignition for
unauthorized operation. While the vehicle security alarm is armed, interior switches for door locks
and liftgate release are disabled. If something triggers the alarm, the vehicle security alarm will
provide the following audible and visible signals: the horn will pulse, the park lamps and/or turn
signals will flash, and the vehicle security light in the instrument cluster will flash.
To Arm Your Alarm
Push the keyless ignition push button until the instrument cluster display indicates that the vehicle
ignition is OFF. Push the power door lock switch while the door is open, push the key fob lock
button, or with one of the key fobs located outside the vehicle and within 5 ft (1.5 m) of the
driver's and passenger front door handles, push the passive entry button located on the door
handle.
NOTE:
After pushing the key fob lock button, you must wait two seconds before you can lock or unlock
the vehicle via the door handle.
To Disarm Your Alarm
Push the unlock button on the key fob or with the key fob located outside the vehicle and within
5 ft (1.5 m) of the driver's and passenger front door handles, grab the Keyless Enter-N-Go —
Passive Entry door handle and enter the vehicle. Then, push the keyless push button ignition
(requires at least one valid key fob in the vehicle).
17
G E T T I N G S TA R T E D
KEYLESS ENTER-N-GO — PASSIVE ENTRY
The Keyless Enter-N-Go system is an enhancement to the vehicle’s Remote Keyless Entry
feature. This feature allows you to lock and unlock the vehicle's door(s) and liftgate without
having to push the key fob lock or unlock buttons, as well as starting and stopping the vehicle with
the push of a button.
To Unlock From The Driver or Passenger Side
With a valid key fob located outside the vehicle
and within 5 ft (1.5 m) of the driver or passenger
side door handle, grab either front door handle
to unlock the door automatically.
To Lock The Vehicle
The passive entry front door and sliding door
handles have buttons located on the outside of
the handle. With one of the vehicles key fobs
located outside the vehicle and within 5 ft
(1.5 m) of the driver's (front and sliding door)
or passenger (front and sliding door) handles,
push the door handle button to lock all four
doors and liftgate.
Grab The Door Handle To Unlock
NOTE:
The passive entry system my be programed
through Uconnect Setting to meet your needs. Refer to “Uconnect Settings” in “Multimedia” in
the Owner’s Manual on www.chrysler.com/en/owners/manuals for further information.
DO NOT grab the door handle when pushing the door handle button. This could unlock the
door(s).
Push The Door Handle Button To Lock
18
G E T T I N G S TA R T E D
NOTE:
• After pushing the door handle button, you
must wait two seconds before you can lock
or unlock the doors, using either Passive
Entry door handle. This is done to allow you
to check if the vehicle is locked by pulling
the door handle, without the vehicle reacting and unlocking.
• The Passive Entry system will not operate if
the key fob battery is dead.
The vehicle doors can also be locked by using
the key fob lock button, or the lock button
located on the vehicle’s interior door panel.
Lock Or Unlock The Power
Liftgate
Do Not Grab The Door Handle
When Locking
With a valid Passive Entry key fob within 5 ft (1.5 m) of the liftgate, cycle the handle to open the
liftgate and lift with one fluid motion.
NOTE:
• If Unlock All Doors has been selected in Uconnect Settings, the liftgate will passively unlock
the entire vehicle. Refer to “Uconnect Settings” in “Multimedia” in the Owner’s Manual on
www.chrysler.com/en/owners/manuals for further information.
• Refer to “Keyless Enter-N-Go — Passive Entry” in “Getting To Know Your Vehicle” in the
Owner’s Manual on www.chrysler.com/en/owners/manuals for further information.
HANDS -FREE SLIDING DOOR AND LIFTGATE
Hands-Free Sliding Doors — If Equipped
To open the Hands-Free Sliding Doors, use a
straight in and out kicking motion under the
vehicle in the general location below the door
handle(s). Do not move your foot sideways or
in a sweeping motion or the sensors may not
detect the motion.
When a valid kicking motion is completed, the
sliding door will chime, the hazard lights will
flash and the sliding door will open almost instantaneously. This assumes all options are enabled in the radio settings.
Hands-Free Sliding Doors
19
G E T T I N G S TA R T E D
NOTE:
• To open the Hands-Free Sliding Doors requires a valid Passive Entry key fob within 5 ft (1.5 m)
of the door handle. If a valid Passive Entry key fob is not within 5 ft (1.5 m), the door will not
respond to any kicks.
• The Hands-Free Sliding Door will only operate when the transmission is in Park.
• If anything obstructs the Hands-Free sliding doors while it is opening, the sliding doors will
automatically reverse to the closed position, provided it meets sufficient resistance.
• If the power sliding doors encounters multiple obstructions within the same cycle, the system
will automatically stop.
The Hands-Free Sliding Doors feature may be turned off through Uconnect Settings. Refer to
“Uconnect Settings” in “Multimedia” in the Owner’s Manual on www.chrysler.com/en/owners/
manuals for further information. The Hands-Free Sliding Doors feature should be turned off
during Jacking, Tire Changing, and Vehicle Service.
Hands-Free Liftgate — If Equipped
To open the liftgate using hands-free activation, use a straight in and out kicking motion
under the vehicle activation zone in the general
location below the liftgate door handle. Do not
move your foot sideways or in a sweeping motion or the sensors may not detect the motion.
Hands-Free Liftgate Activation Zone
20
G E T T I N G S TA R T E D
Vehicles Equipped With A Trailer Tow Package
NOTE:
If your vehicle is equipped with the Trailer Tow Package, the hands-free activation zone(s) for the
Power Liftgate will be located on the left and right side of the receiver. Use a straight kicking
motion under either activation zone to open the Hands-Free Liftgate.
When a valid kicking motion is completed, the
liftgate will chime, the hazard lights will flash
and the liftgate will open after approximately
one second. This assumes all options are enabled in the radio.
NOTE:
To open the Hands-Free Liftgate requires a
valid Passive Entry key fob within 5 ft (1.5 m) of
the door handle. If a valid Passive Entry key fob
is not within 5 ft (1.5 m), the liftgate will not
respond to any kicks.
Hands-Free Liftgate Trailer Tow Activation
Zones
NOTE:
The Hands-Free Liftgate feature may be turned on or off in Uconnect Settings. Refer to
“Uconnect Settings” in “Multimedia” in the Owner’s Manual at www.chrysler.com/en/
owners/manuals for further information. The Hands-Free Liftgate feature should be turned off
during Jacking, Tire Changing, and Vehicle Service.
NOTE:
• The Hands-Free Liftgate will only operate when the transmission is in PARK.
• If anything obstructs the Hands-Free liftgate while it is opening, the liftgate will automatically
reverse to the closed position, provided it meets sufficient resistance.
• There are pinch sensors attached to the side of the liftgate opening. Light pressure anywhere
along these strips will cause the liftgate to return to the open position.
• If the power liftgate encounters multiple obstructions within the same cycle, the system will
automatically stop. If this occurs, the liftgate must be operated manually.
• The power liftgate will release, but not power open, in temperatures below −12° F (−24° C). Be
sure to remove any buildup of snow or ice from the liftgate before opening the liftgate.
• If the liftgate is left open for an extended period of time, the liftgate may need to be closed
manually to reset power liftgate functionality.
WARNING!
• Driving with the liftgate open can allow poisonous exhaust gases into your vehicle. You and
your passengers could be injured by these fumes. Keep the liftgate closed when you are
operating the vehicle.
• If you are required to drive with the liftgate open, make sure that all windows are closed, and
the climate control blower switch is set at high speed. Do not use the recirculation mode.
21
G E T T I N G S TA R T E D
Gas props support the liftgate in the open position. However, because the gas pressure drops
with temperature, it may be necessary to assist the props when opening the liftgate in cold
weather.
NOTE:
Allow the power system to open the liftgate. Manually pushing or pulling the liftgate may activate
the liftgate obstacle detection feature and stop the power operation or reverse its direction.
WARNING!
During power operation, personal injury or cargo damage may occur. Ensure the liftgate travel
path is clear. Make sure the liftgate is closed and latched before driving away.
KEYLESS ENTER-N-GO — IGNITION
NOTE:
In case the ignition switch does not change with the push of a button, the key fob may have a low
or dead battery. In this situation, a back up method can be used to operate the ignition switch. Put
the nose side of the key fob (side opposite of the Emergency Key) against the ENGINE
START/STOP button and push to operate the ignition switch.
Starting
Perform the following starting procedure with a key fob inside the vehicle:
1. Place the gear selector in PARK or NEUTRAL.
2. While depressing the brake pedal, push the ENGINE START/STOP button once. If the
engine fails to start, the starter will disengage automatically after 10 seconds.
3. To stop the cranking of the engine prior to the engine starting, push the button again.
Stopping
1. Bring the vehicle to a complete stop.
2. Shift the transmission to PARK (P).
3. Push the ENGINE START/STOP button once. The ignition will return to the OFF mode.
NOTE:
If the transmission is not in PARK and the vehicle is in motion, the ENGINE START/STOP
button must be held for two seconds with the vehicle speed above 5 mph (8 km/h) before the
engine will shut off.
For further information and applicable warnings and cautions, please refer to your Owner’s
Manual at www.chrysler.com/en/owners/manuals.
22
G E T T I N G S TA R T E D
OCCUPANT RESTRAINT SYSTEMS
Some of the most important safety features in your vehicle are the restraint systems:
Occupant Restraint Systems Features
• Seat Belt Systems
• Supplemental Restraint Systems (SRS) Air Bags
• Child Restraints
Some of the safety features described in this section may be standard equipment on some
models, or may be optional equipment on others. If you are not sure, ask your authorized dealer.
Important Safety Precautions
Please pay close attention to the information in this section. It tells you how to use your restraint
system properly, to keep you and your passengers as safe as possible.
Here are some simple steps you can take to minimize the risk of harm from a deploying air bag:
1. Children 12 years old and under should always ride buckled up in a vehicle with a rear seat.
2. If a child from 2 to 12 years old (not in a rear-facing child restraint) must ride in the front
passenger seat, move the seat as far back as possible and use the proper child restraint (refer
to “Child Restraints” in this section for further information).
3. Children that are not big enough to wear the vehicle seat belt properly (refer to “Child
Restraints” in this section for further information) should be secured in a vehicle with a rear seat
in child restraints or belt-positioning booster seats. Older children who do not use child
restraints or belt-positioning booster seats should ride properly buckled up in a vehicle with a
rear seat.
4. Never allow children to slide the shoulder belt behind them or under their arm.
5. You should read the instructions provided with your child restraint to make sure that you are
using it properly.
6. All occupants should always wear their lap and shoulder belts properly.
7. The driver and front passenger seats should be moved back as far as practical to allow the front
air bags room to inflate.
8. Do not lean against the door or window. If your vehicle has side air bags, and deployment
occurs, the side air bags will inflate forcefully into the space between occupants and the door
and occupants could be injured.
9. If the air bag system in this vehicle needs to be modified to accommodate a disabled person,
refer to the “Consumer Assistance” section for customer service contact information.
23
G E T T I N G S TA R T E D
WARNING!
• Never place a rear-facing child restraint in front of an air bag. A deploying passenger front
air bag can cause death or serious injury to a child 12 years or younger, including a child in a
rear-facing child restraint.
• Only use a rear-facing child restraint in a vehicle with a rear seat.
Seat Belt Systems
Buckle up even though you are an excellent driver, even on short trips. Someone on the road may
be a poor driver and could cause a collision that includes you. This can happen far away from
home or on your own street.
Research has shown that seat belts save lives, and they can reduce the seriousness of injuries in a
collision. Some of the worst injuries happen when people are thrown from the vehicle. Seat belts
reduce the possibility of ejection and the risk of injury caused by striking the inside of the vehicle.
Everyone in a motor vehicle should be belted at all times.
Enhanced Seat Belt Use Reminder System (BeltAlert)
Driver And Passenger BeltAlert — If Equipped
BeltAlert is a feature intended to remind the driver and outboard front seat passenger (if
equipped with outboard front passenger seat BeltAlert) to buckle their seat belts. The Belt Alert
feature is active whenever the ignition switch is in the START or ON/RUN position.
Initial Indication
If the driver is unbuckled when the ignition switch is first in the START or ON/RUN position, a
chime will signal for a few seconds. If the driver or outboard front seat passenger (if equipped with
outboard front passenger seat BeltAlert) is unbuckled when the ignition switch is first in the
START or ON/RUN position the Seat Belt Reminder Light will turn on and remain on until both
outboard front seat belts are buckled. The outboard front passenger seat BeltAlert is not active
when an outboard front passenger seat is unoccupied.
BeltAlert Warning Sequence
The BeltAlert warning sequence is activated when the vehicle is moving above a specified vehicle
speed range and the driver or outboard front seat passenger is unbuckled (if equipped with
outboard front passenger seat BeltAlert) (the outboard front passenger seat BeltAlert is not
active when the outboard front passenger seat is unoccupied). The BeltAlert warning sequence
starts by blinking the Seat Belt Reminder Light and sounding an intermittent chime. Once the
BeltAlert warning sequence has completed, the Seat Belt Reminder Light will remain on until the
seat belts are buckled. The BeltAlert warning sequence may repeat based on vehicle speed until
the driver and occupied outboard front seat passenger seat belts are buckled. The driver should
instruct all occupants to buckle their seat belts.
24
G E T T I N G S TA R T E D
Change Of Status
If the driver or outboard front seat passenger (if equipped with outboard front passenger seat
BeltAlert) unbuckles their seat belt while the vehicle is traveling, the BeltAlert warning sequence
will begin until the seat belts are buckled again.
The outboard front passenger seat BeltAlert is not active when the outboard front passenger seat
is unoccupied. BeltAlert may be triggered when an animal or other items are placed on the
outboard front passenger seat or when the seat is folded flat (if equipped). It is recommended
that pets be restrained in the rear seat (if equipped) in pet harnesses or pet carriers that are
secured by seat belts, and cargo is properly stowed.
BeltAlert can be activated or deactivated by your authorized dealer. FCA US LLC does not
recommend deactivating BeltAlert.
NOTE:
If BeltAlert has been deactivated and the driver or outboard front seat passenger (if equipped
with outboard front passenger seat BeltAlert) is unbuckled the Seat Belt Reminder Light will turn
on and remain on until the driver and outboard front seat passenger seat belts are buckled.
Lap/Shoulder Belts
All seating positions in your vehicle are equipped with lap/shoulder belts.
The seat belt webbing retractor will lock only during very sudden stops or collisions. This feature
allows the shoulder part of the seat belt to move freely with you under normal conditions.
However, in a collision the seat belt will lock and reduce your risk of striking the inside of the
vehicle or being thrown out of the vehicle.
WARNING!
• Relying on the air bags alone could lead to more severe injuries in a collision. The air bags
work with your seat belt to restrain you properly. In some collisions, the air bags won’t deploy
at all. Always wear your seat belt even though you have air bags.
• In a collision, you and your passengers can suffer much greater injuries if you are not properly
buckled up. You can strike the interior of your vehicle or other passengers, or you can be thrown
out of the vehicle. Always be sure you and others in your vehicle are buckled up properly.
• It is dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people
riding in these areas are more likely to be seriously injured or killed.
• Do not allow people to ride in any area of your vehicle that is not equipped with seats and
seat belts.
• Be sure everyone in your vehicle is in a seat and using a seat belt properly. Occupants, including
the driver, should always wear their seat belts whether or not an air bag is also provided at their
seating position to minimize the risk of severe injury or death in the event of a crash.
• Wearing your seat belt incorrectly could make your injuries in a collision much worse. You
might suffer internal injuries, or you could even slide out of the seat belt. Follow these
instructions to wear your seat belt safely and to keep your passengers safe, too.
• Two people should never be belted into a single seat belt. People belted together can crash
into one another in a collision, hurting one another badly. Never use a lap/shoulder belt or
a lap belt for more than one person, no matter what their size.
25
G E T T I N G S TA R T E D
WARNING!
• A lap belt worn too high can increase the risk of injury in a collision. The seat belt forces
won’t be at the strong hip and pelvic bones, but across your abdomen. Always wear the lap
part of your seat belt as low as possible and keep it snug.
• A twisted seat belt may not protect you properly. In a collision, it could even cut into you. Be
sure the seat belt is flat against your body, without twists. If you can’t straighten a seat belt
in your vehicle, take it to your authorized dealer immediately and have it fixed.
• A seat belt that is buckled into the wrong buckle will not protect you properly. The lap
portion could ride too high on your body, possibly causing internal injuries. Always buckle
your seat belt into the buckle nearest you.
• A seat belt that is too loose will not protect you properly. In a sudden stop, you could move
too far forward, increasing the possibility of injury. Wear your seat belt snugly.
• A seat belt that is worn under your arm is dangerous. Your body could strike the inside
surfaces of the vehicle in a collision, increasing head and neck injury. A seat belt worn under
the arm can cause internal injuries. Ribs aren’t as strong as shoulder bones. Wear the seat
belt over your shoulder so that your strongest bones will take the force in a collision.
• A shoulder belt placed behind you will not protect you from injury during a collision. You are
more likely to hit your head in a collision if you do not wear your shoulder belt. The lap and
shoulder belt are meant to be used together.
• A frayed or torn seat belt could rip apart in a collision and leave you with no protection.
Inspect the seat belt system periodically, checking for cuts, frays, or loose parts. Damaged
parts must be replaced immediately. Do not disassemble or modify the seat belt system.
Seat belt assemblies must be replaced after a collision.
26
G E T T I N G S TA R T E D
Lap/Shoulder Belt Operating Instructions
1. Enter the vehicle and close the door. Sit back and adjust the seat.
2. The seat belt latch plate is above the back of the front seat, and next to your arm in the rear
seat (for vehicles equipped with a rear seat). Grasp the latch plate and pull out the seat belt.
Slide the latch plate up the webbing as far as necessary to allow the seat belt to go around your
lap.
3. When the seat belt is long enough to fit,
insert the latch plate into the buckle until
you hear a “click.”
4. Position the lap belt so that it is snug and lies
low across your hips, below your abdomen.
To remove slack in the lap belt portion, pull
up on the shoulder belt. To loosen the lap
belt if it is too tight, tilt the latch plate and
pull on the lap belt. A snug seat belt reduces
the risk of sliding under the seat belt in a
collision.
5. Position the shoulder belt across the shoulder and chest with minimal, if any slack so
that it is comfortable and not resting on your
neck. The retractor will withdraw any slack in
the shoulder belt.
Pulling Out The Seat Belt
1 — Seat Belt
2 — Seat Belt Buckle
6. To release the seat belt, push the red button
on the buckle. The seat belt will automatically retract to its stowed position. If necessary, slide the latch plate down the webbing to allow the seat belt to retract fully.
Lap/Shoulder Belt Untwisting Procedure
Use the following procedure to untwist a twisted lap/shoulder belt.
1. Position the latch plate as close as possible to the anchor point.
2. At about 6 to 12 inches (15 to 30 cm) above the latch plate, grasp and twist the seat belt
webbing 180 degrees to create a fold that begins immediately above the latch plate.
3. Slide the latch plate upward over the folded webbing. The folded webbing must enter the slot
at the top of the latch plate.
4. Continue to slide the latch plate up until it clears the folded webbing and the seat belt is no
longer twisted.
27
G E T T I N G S TA R T E D
Adjustable Upper Shoulder Belt Anchorage
In the front and second row outboard seats the shoulder belt can be adjusted upward or
downward to position the seat belt away from your neck. Push or squeeze the anchorage button
to release the anchorage, and move it up or down to the position that serves you best.
As a guide, if you are shorter than average, you
will prefer the shoulder belt anchorage in a
lower position, and if you are taller than average, you will prefer the shoulder belt anchorage
in a higher position. After you release the anchorage button, try to move it up or down to
make sure that it is locked in position.
NOTE:
The adjustable upper shoulder belt anchorage
is equipped with an Easy Up feature. This feature allows the shoulder belt anchorage to be
adjusted in the upward position without pushing or squeezing the release button. To verify
the shoulder belt anchorage is latched, pull
downward on the shoulder belt anchorage until
it is locked into position.
Adjustable Anchorage
WARNING!
• Wearing your seat belt incorrectly could make your injuries in a collision much worse. You
might suffer internal injuries, or you could even slide out of the seat belt. Follow these
instructions to wear your seat belt safely and to keep your passengers safe, too.
• Position the shoulder belt across the shoulder and chest with minimal, if any slack so that it
is comfortable and not resting on your neck. The retractor will withdraw any slack in the
shoulder belt.
• Misadjustment of the seat belt could reduce the effectiveness of the safety belt in a crash.
28
G E T T I N G S TA R T E D
Second Row Center (If Equipped) And Third Row Center Seat Belt Operating Instructions
The second row center (if equipped) and third row center seat belts features a seat belt with a
mini-latch plate and buckle, which allows the seat belt to detach from the lower anchor when the
seat is folded. The mini-latch plate and regular latch plate can then be stored out of the way in the
headliner for added convenience to open up utilization of the storage areas behind the front seats
when the seat is not occupied.
1. Remove the mini-latch plate and regular latch plate from its stowed position in the headliner
slightly behind the second or third row seat.
2. Grasp the mini-latch plate and pull the seat
belt over the seat.
3. Route the shoulder belt to the inside of the
left head restraint.
4. When the seat belt is long enough to fit,
insert the mini-latch plate into the minibuckle until you hear a “click.”
5. Sit back in seat. Slide the regular latch plate
up the webbing as far as necessary to allow
the seat belt to go around your lap.
Mini-Latch Stowage
Connect Mini-Latch To Buckle
29
G E T T I N G S TA R T E D
6. When the seat belt is long enough to fit, insert the latch plate into the buckle until you hear a
“click.”
7. Position the lap belt so that it is snug and lies
low across your hips, below your abdomen.
To remove slack in the lap belt portion, pull
up on the shoulder belt. To loosen the lap
belt if it is too tight, pull on the lap belt. A
snug seat belt reduces the risk of sliding
under the seat belt in a collision.
8. Position the shoulder belt on your chest so
that it is comfortable and not resting on your
neck. The retractor will withdraw any slack in
the seat belt.
9. To release the seat belt, push the red button
on the buckle.
Mini-Latch And Buckle Connected
10. To disengage the mini-latch plate from the
mini-buckle for storage, insert the regular
latch plate into the center red slot on the mini-buckle. The seat belt will automatically retract
to its stowed position. If necessary, slide the latch plate down the webbing to allow the seat
belt to retract fully. Insert the mini-latch plate and regular latch plate into its stowed position.
WARNING!
• If the mini-latch plate and mini-buckle are not properly connected when the seat belt is used
by an occupant, the seat belt will not be able to provide proper restraint and will increase the
risk of injury in a collision.
• When reattaching the mini-latch plate and mini-buckle, ensure the seat belt webbing is not
twisted. If the webbing is twisted, follow the preceding procedure to detach the mini-latch
plate and mini-buckle, untwist the webbing, and reattach the mini-latch plate and minibuckle.
30
G E T T I N G S TA R T E D
Seat Belt Extender
If a seat belt is not long enough to fit properly, even when the webbing is fully extended and the
adjustable upper shoulder belt anchorage (if equipped) is in its lowest position, your authorized
dealer can provide you with a Seat Belt Extender. The Seat Belt Extender should be used only if
the existing seat belt is not long enough. When the Seat Belt Extender is not required for a
different occupant, it must be removed.
WARNING!
• ONLY use a Seat Belt Extender if it is physically required in order to properly fit the original
seat belt system. DO NOT USE the Seat Belt Extender if, when worn, the distance between
the front edge of the Seat Belt Extender buckle and the center of the occupant’s body is
LESS than 6 inches.
• Using a Seat Belt Extender when not needed can increase the risk of serious injury or death
in a collision. Only use the Seat Belt Extender when the lap belt is not long enough and only
use in the recommended seating positions. Remove and store the Seat Belt Extender when
not needed.
Seat Belts And Pregnant Women
Seat belts must be worn by all occupants including pregnant women: the risk of injury in
the event of an accident is reduced for the
mother and the unborn child if they are wearing
a seat belt.
Position the lap belt snug and low below the
abdomen and across the strong bones of the
hips. Place the shoulder belt across the chest
and away from the neck. Never place the shoulder belt behind the back or under the arm.
Seat Belt Pretensioner
Pregnant Women And Seat Belts
The front seat belt system is equipped with pretensioning devices that are designed to remove
slack from the seat belt in the event of a collision. These devices may improve the performance
of the seat belt by removing slack from the seat belt early in a collision. Pretensioners work for all
size occupants, including those in child restraints.
NOTE:
These devices are not a substitute for proper seat belt placement by the occupant. The seat belt
still must be worn snugly and positioned properly.
The pretensioners are triggered by the Occupant Restraint Controller (ORC). Like the air bags,
the pretensioners are single use items. A deployed pretensioner or a deployed air bag must be
replaced immediately.
31
G E T T I N G S TA R T E D
Energy Management Feature
The front seat belt system is equipped with an Energy Management feature that may help further
reduce the risk of injury in the event of a collision. The seat belt system has a retractor assembly
that is designed to release webbing in a controlled manner.
Switchable Automatic Locking Retractors (ALR)
The seat belts in the passenger seating positions are equipped with a Switchable Automatic
Locking Retractor (ALR) which is used to secure a child restraint system. For additional information, refer to “Installing Child Restraints Using The Vehicle Seat Belt” under the “Child Restraints”
section of this manual. The figure below illustrates the locking feature for each seating position.
7 Passenger Automatic Locking Retractor
(ALR) Locations
8 Passenger Automatic Locking Retractor
(ALR) Locations
If the passenger seating position is equipped with an ALR and is being used for normal usage,
only pull the seat belt webbing out far enough to comfortably wrap around the occupant’s
mid-section so as to not activate the ALR. If the ALR is activated, you will hear a clicking sound
as the seat belt retracts. Allow the webbing to retract completely in this case and then carefully
pull out only the amount of webbing necessary to comfortably wrap around the occupant’s
mid-section. Slide the latch plate into the buckle until you hear a "click."
In Automatic Locking Mode, the shoulder belt is automatically pre-locked. The seat belt will still
retract to remove any slack in the shoulder belt. Use the Automatic Locking Mode anytime a
child restraint is installed in a seating position that has a seat belt with this feature. Children
12 years old and under should always be properly restrained in a vehicle with a rear seat.
WARNING!
• Never place a rear-facing child restraint in front of an air bag. A deploying passenger front
air bag can cause death or serious injury to a child 12 years or younger, including a child in a
rear-facing child restraint.
• Only use a rear-facing child restraint in a vehicle with a rear seat.
32
G E T T I N G S TA R T E D
How To Engage The Automatic Locking Mode
1. Buckle the combination lap and shoulder belt.
2. Grasp the shoulder portion and pull downward until the entire seat belt is extracted.
3. Allow the seat belt to retract. As the seat belt retracts, you will hear a clicking sound. This
indicates the seat belt is now in the Automatic Locking Mode.
How To Disengage The Automatic Locking Mode
Unbuckle the combination lap/shoulder belt and allow it to retract completely to disengage the
Automatic Locking Mode and activate the vehicle sensitive (emergency) locking mode.
WARNING!
• The seat belt assembly must be replaced if the switchable Automatic Locking Retractor
(ALR) feature or any other seat belt function is not working properly when checked
according to the procedures in the Service Manual.
• Failure to replace the seat belt assembly could increase the risk of injury in collisions.
• Do not use the Automatic Locking Mode to restrain occupants who are wearing the seat
belt or children who are using booster seats. The locked mode is only used to install
rear-facing or forward-facing child restraints that have a harness for restraining the child.
Seat Belt Park Stitch — If Equipped
The rear outboard seat belts may be equipped
with a park stitch to raise the latch plate for
easier access to occupants. If the park stitch
interferes with the tight installation of a child
restraint, slide the latch plate over the stitching
to shorten the lap portion of the belt and install
the car seat normally. When the car seat is
removed from the vehicle, slide the latch plate
above the park stitch to enable occupants to
latch the seat belt securely.
Seat Belt Park Stitch Location
33
G E T T I N G S TA R T E D
Third Row Stow Clip — If Equipped
Your vehicle may be equipped with a stow clip
on the lower trim behind the third row. This clip
is used to hold the seat belt out of the path of
the power folding third row seat. Only place
the seat belt webbing in this clip while folding
and opening the seat. Do not leave the webbing behind the clip when using the belt to
restrain an occupant.
Third Row Stow Clip
WARNING!
Do not place the seat belt webbing behind the third row stow clip when using the seat belt to
restrain an occupant. The seat belt will not be positioned properly on the occupant and they
could be more seriously injured in an accident as a result.
Supplemental Restraint Systems (SRS)
Some of the safety features described in this section may be standard equipment on some
models, or may be optional equipment on others. If you are not sure, ask your authorized dealer.
The air bag system must be ready to protect you in a collision. The Occupant Restraint Controller
(ORC) monitors the internal circuits and interconnecting wiring associated with the electrical Air
Bag System Components. Your vehicle may be equipped with the following Air Bag System
Components:
Air Bag System Components
• Occupant Restraint Controller (ORC)
• Air Bag Warning Light
• Steering Wheel and Column
• Instrument Panel
• Knee Impact Bolsters
• Driver and Front Passenger Air Bags
• Supplemental Side Air Bags
• Supplemental Knee Air Bags
• Front and Side Impact Sensors
34
G E T T I N G S TA R T E D
• Seat Belt Pretensioners
• Seat Track Position Sensors
• Seat Belt Buckle Switch
• Occupant Classification System
Air Bag Warning Light
The ORC monitors the readiness of the electronic parts of the air bag system whenever the
ignition switch is in the START or ON/RUN position. If the ignition switch is in the OFF position
or in the ACC position, the air bag system is not on and the air bags will not inflate.
The ORC contains a backup power supply system that may deploy the air bag system even if the
battery loses power or it becomes disconnected prior to deployment.
The ORC turns on the Air Bag Warning Light in the instrument panel for approximately four to
eight seconds for a self-check when the ignition switch is first in the ON/RUN position. After the
self-check, the Air Bag Warning Light will turn off. If the ORC detects a malfunction in any part
of the system, it turns on the Air Bag Warning Light, either momentarily or continuously. A single
chime will sound to alert you if the light comes on again after initial startup.
The ORC also includes diagnostics that will illuminate the instrument panel Air Bag Warning
Light if a malfunction is detected that could affect the air bag system. The diagnostics also record
the nature of the malfunction. While the air bag system is designed to be maintenance free, if any
of the following occurs, have an authorized dealer service the air bag system immediately.
• The Air Bag Warning Light does not come on during the four to eight seconds when the
ignition switch is first in the ON/RUN position.
• The Air Bag Warning Light remains on after the four to eight-second interval.
• The Air Bag Warning Light comes on intermittently or remains on while driving.
NOTE:
If the speedometer, tachometer, or any engine related gauges are not working, the Occupant
Restraint Controller (ORC) may also be disabled. In this condition the air bags may not be ready
to inflate for your protection. Have an authorized dealer service the air bag system immediately.
WARNING!
Ignoring the Air Bag Warning Light in your instrument panel could mean you won’t have the
air bag system to protect you in a collision. If the light does not come on as a bulb check when
the ignition is first turned on, stays on after you start the vehicle, or if it comes on as you drive,
have an authorized dealer service the air bag system immediately.
35
G E T T I N G S TA R T E D
Redundant Air Bag Warning Light
If a fault with the Air Bag Warning Light is detected, which could affect the Supplemental
Restraint System (SRS), the Redundant Air Bag Warning Light will illuminate on the instrument
panel. The Redundant Air Bag Warning Light will stay on until the fault is cleared. In addition, a
single chime will sound to alert you that the Redundant Air Bag Warning Light has come on and
a fault has been detected. If the Redundant Air Bag Warning Light comes on intermittently or
remains on while driving have an authorized dealer service the vehicle immediately.
For additional information regarding the Redundant Air Bag Warning Light, refer to “Warning
And Indicator Lights” in “What To Do In Emergencies” chapter of this manual.
Front Air Bags
This vehicle has front air bags and lap/shoulder belts for both the driver and front passenger. The front
air bags are a supplement to the seat belt restraint systems. The driver front air bag is mounted in the
center of the steering wheel. The passenger front air bag is mounted in the instrument panel, above the
glove compartment. The words “SRS AIRBAG” or “AIRBAG” are embossed on the air bag covers.
Front Air Bag/Knee Impact Bolster Locations
1 — Driver And Passenger Front Air Bags
2 — Passenger Knee Impact Bolster/
Supplemental Passenger Knee Air Bag
3 — Driver Knee Impact Bolster/
Supplemental Driver Knee Air Bag
WARNING!
• Being too close to the steering wheel or instrument panel during front air bag deployment
could cause serious injury, including death. Air bags need room to inflate. Sit back,
comfortably extending your arms to reach the steering wheel or instrument panel.
• Never place a rear-facing child restraint in front of an air bag. A deploying passenger front
air bag can cause death or serious injury to a child 12 years or younger, including a child in a
rear-facing child restraint.
• Only use a rear-facing child restraint in a vehicle with a rear seat.
36
G E T T I N G S TA R T E D
Driver And Passenger Front Air Bag Features
The Advanced Front Air Bag system has multistage driver and front passenger air bags. This
system provides output appropriate to the severity and type of collision as determined by the
Occupant Restraint Controller (ORC), which may receive information from the front impact
sensors (if equipped) or other system components.
The first stage inflator is triggered immediately during an impact that requires air bag deployment. A low energy output is used in less severe collisions. A higher energy output is used for
more severe collisions.
This vehicle may be equipped with a driver and/or front passenger seat belt buckle switch that
detects whether the driver or front passenger seat belt is buckled. The seat belt buckle switch may
adjust the inflation rate of the Advanced Front Air Bags.
This vehicle may be equipped with driver and/or front passenger seat track position sensors that
may adjust the inflation rate of the Advanced Front Air Bags based upon seat position.
This vehicle is equipped with a right front passenger Occupant Classification System (“OCS”)
that is designed to provide Passenger Advanced Front Air Bag output appropriate to the
occupant’s seated weight input, as determined by the OCS.
WARNING!
• No objects should be placed over or near the air bag on the instrument panel or steering
wheel because any such objects could cause harm if the vehicle is in a collision severe
enough to cause the air bag to inflate.
• Do not put anything on or around the air bag covers or attempt to open them manually. You
may damage the air bags and you could be injured because the air bags may no longer be
functional. The protective covers for the air bag cushions are designed to open only when
the air bags are inflating.
• Relying on the air bags alone could lead to more severe injuries in a collision. The air bags
work with your seat belt to restrain you properly. In some collisions, air bags won’t deploy at
all. Always wear your seat belts even though you have air bags.
Front Air Bag Operation
Front Air Bags are designed to provide additional protection by supplementing the seat belts.
Front air bags are not expected to reduce the risk of injury in rear, side, or rollover collisions. The
front air bags will not deploy in all frontal collisions, including some that may produce substantial
vehicle damage — for example, some pole collisions, truck underrides, and angle offset collisions.
On the other hand, depending on the type and location of impact, front air bags may deploy in
crashes with little vehicle front-end damage but that produce a severe initial deceleration.
Because air bag sensors measure vehicle deceleration over time, vehicle speed and damage by
themselves are not good indicators of whether or not an air bag should have deployed.
Seat belts are necessary for your protection in all collisions, and also are needed to help keep you
in position, away from an inflating air bag.
37
G E T T I N G S TA R T E D
When the ORC detects a collision requiring the front air bags, it signals the inflator units. A large
quantity of non-toxic gas is generated to inflate the front air bags.
The steering wheel hub trim cover and the upper right side of the instrument panel separate and
fold out of the way as the air bags inflate to their full size. The front air bags fully inflate in less time
than it takes to blink your eyes. The front air bags then quickly deflate while helping to restrain the
driver and front passenger.
Occupant Classification System (OCS) — Front Passenger Seat
The OCS is part of a Federally regulated safety system for this vehicle. It is designed to provide
Passenger Advanced Front Air Bag output appropriate to the occupant’s seated weight, as
determined by the OCS.
The Occupant Classification System (OCS) consists of the following:
• Occupant Restraint Controller (ORC)
• Occupant Classification Module (OCM) and Sensor located in the front passenger seat
• Air Bag Warning Light
Occupant Classification Module (OCM) And Sensor
The Occupant Classification Module (OCM) is located underneath the front passenger seat. The
Sensor is located beneath the passenger seat cushion foam. Any weight on the seat will be sensed by
the Sensor. The OCM uses input from the Sensor to determine the front passenger’s most probable
classification. The OCM communicates this information to the ORC. The ORC may reduce the
inflation rate of the Passenger Advanced Front Air Bag deployment based on occupant classification. In order for the OCS to operate as designed, it is important for the front passenger to be seated
properly and properly wearing the seat belt.
The OCS will NOT prevent deployment of the Passenger Advanced Front Air Bag. The OCS may
reduce the inflation rate of the Passenger Advanced Front Air Bag if the OCS estimates that:
• The front passenger seat is unoccupied or has very light objects on it; or
• The front passenger seat is occupied by a small passenger, including a child; or
• The front passenger seat is occupied by a rear-facing child restraint; or
• The front passenger is not properly seated or his or her weight is taken off of the seat for a
period of time.
Front Passenger Seat Occupant Status
Rear-facing child restraint
Child, including a child in a forward-facing child
restraint or booster seat*
Properly seated adult
Unoccupied seat
Front Passenger Air Bag Output
Reduced-power deployment
Reduced-power deployment OR Full-power
deployment
Full-power deployment OR reduced-power
deployment
Reduced-power deployment
* It is possible for a child to be classified as an adult, allowing a full-power Passenger Advanced
Front Air Bag deployment. Never allow children to ride in the front passenger seat and never
install a child restraint system, including a rear-facing child restraint, in the front passenger seat.
38
G E T T I N G S TA R T E D
WARNING!
• Never place a rear-facing child restraint in front of an air bag. A deploying passenger front
air bag can cause death or serious injury to a child 12 years or younger, including a child in a
rear-facing child restraint.
• Only use a rear-facing child restraint in a vehicle with a rear seat.
• Children 12 years or younger should always ride buckled up in a vehicle with a rear seat.
The OCS determines the front passenger’s most probable classification. The OCS estimates the
seated weight on the front passenger seat and where that weight is located. The OCS communicates the classification status to the ORC. The ORC uses the classification to determine
whether the Passenger Advanced Front Air Bag inflation rate should be adjusted.
In order for the OCS to operate as designed, it is important for the front passenger to be seated
properly and properly wearing the seat belt. Properly seated passengers are:
• Sitting upright
• Facing forward
• Sitting in the center of the seat with their feet comfortably on or near the floor
• Sitting with their back against the seatback and the seatback in an upright position
Seated Properly
Lighter Weight Passengers (Including Small Adults)
When a lighter weight passenger, including a small adult, occupies the front passenger seat, the
OCS may reduce the inflation rate of the Passenger Advanced Front Air Bag. This does not
mean that the OCS is working improperly.
Do not decrease OR increase the front passenger’s seated weight on the front passenger
seat
The front passenger’s seated weight must be properly positioned on the front passenger seat.
Failure to do so may result in serious injury or death. The OCS determines the most probable
classification of the occupant that it detects. The OCS will detect the front passenger’s decreased or increased seated weight, which may result in an adjusted inflation rate of the
Passenger Advanced Front Air Bag in a collision. This does not mean that the OCS is working
improperly. Decreasing the front passenger’s seated weight on the front passenger seat may
39
G E T T I N G S TA R T E D
result in a reduced-power deployment of the Passenger Advanced Front Air Bag. Increasing the
front passenger’s seated weight on the front passenger seat may result in a full-power deployment of the Passenger Advanced Front Air Bag.
Examples of improper front passenger seating include:
• The front passenger’s weight is transferred to another part of the vehicle (like the door, arm
rest or instrument panel).
• The front passenger leans forward, sideways, or turns to face the rear of the vehicle.
• The front passenger’s seatback is not in the full upright position.
• The front passenger carries or holds an object while seated (e.g., backpack, box, etc.).
• Objects are lodged under the front passenger seat.
• Objects are lodged between the front passenger seat and center console.
• Accessories that may change the seated weight on the front passenger seat are attached to
the front passenger seat.
• Anything that may decrease or increase the front passenger’s seated weight.
The OCS determines the front passenger’s most probable classification. If an occupant in the
front passenger seat is seated improperly, the occupant may provide an output signal to the OCS
that is different from the occupant’s properly seated weight input, for example:
40
Not Seated Properly
Not Seated Properly
Not Seated Properly
Not Seated Properly
G E T T I N G S TA R T E D
WARNING!
• If a child restraint system, child, small teenager or adult in the front passenger seat is seated
improperly, the occupant may provide an output signal to the OCS that is different from the
occupant’s properly seated weight input. This may result in serious injury or death in a
collision.
• Always wear your seat belt and sit properly, with the seatback in an upright position, your
back against the seatback, sitting upright, facing forward, in the center of the seat, with your
feet comfortably on or near the floor.
• Do not carry or hold any objects (e.g., backpacks, boxes, etc.) while seated in the front
passenger seat. Holding an object may provide an output signal to the OCS that is different
than the occupant’s properly seated weight input, which may result in serious injury or death
in a collision.
• Placing an object on the floor under the front passenger seat may prevent the OCS from
working properly, which may result in serious injury or death in a collision. Do not place any
objects on the floor under the front passenger seat.
The Air Bag Warning Light
in the instrument panel will turn on whenever the OCS is unable
to classify the front passenger seat status. A malfunction in the OCS may affect the operation of
the air bag system.
If the Air Bag Warning Light
does not come on, or stays on after you start the vehicle, or it
comes on as you drive, take the vehicle to an authorized dealer for service immediately.
The passenger seat assembly contains critical OCS components that may affect the Passenger
Advanced Front Air Bag inflation. In order for the OCS to properly classify the seated weight of
a front seat passenger, the OCS components must function as designed. Do not make any
modifications to the front passenger seat components, assembly, or to the seat cover. If the seat,
trim cover, or cushion needs service for any reason, take the vehicle to your authorized dealer.
Only FCA US LLC approved seat accessories may be used.
The following requirements must be strictly followed:
• Do not modify the front passenger seat assembly or components in any way.
• Do not use prior or future model year seat covers or cushions not designated by FCA US LLC
for the specific model being repaired. Always use the correct seat cover and cushion specified
for the vehicle.
• Do not replace the seat cover or cushion with an aftermarket seat cover or cushion.
• Do not add a secondary seat cover or mat.
• At no time should any Supplemental Restraint System (SRS) component or SRS related
component or fastener be modified or replaced with any part except those which are
approved by FCA US LLC.
41
G E T T I N G S TA R T E D
WARNING!
• Unapproved modifications or service procedures to the passenger seat assembly, its related
components, seat cover or cushion may inadvertently change the air bag deployment in
case of a frontal collision. This could result in death or serious injury to the front passenger
if the vehicle is involved in a collision. A modified vehicle may not comply with required
Federal Motor Vehicle Safety Standards (FMVSS) and/or Canadian Motor Vehicle Safety
Standards (CMVSS).
• If it is necessary to modify the air bag system for persons with disabilities, contact your
authorized dealer.
Knee Impact Bolsters
The Knee Impact Bolsters help protect the knees of the driver and front passenger, and position
the front occupants for improved interaction with the front air bags.
WARNING!
• Do not drill, cut, or tamper with the knee impact bolsters in any way.
• Do not mount any accessories to the knee impact bolsters such as alarm lights, stereos,
citizen band radios, etc.
Supplemental Driver And Front Passenger Knee Air Bags
This vehicle is equipped with a Supplemental Driver Knee Air Bag mounted in the instrument
panel below the steering column and a Supplemental Passenger Knee Air Bag mounted in the
instrument panel below the glove compartment. The Supplemental Knee Air Bags provide
enhanced protection during a frontal impact by working together with the seat belts, pretensioners, and front air bags.
42
G E T T I N G S TA R T E D
Supplemental Side Air Bags
Your vehicle is equipped with two types of side air bags:
1. Supplemental Seat-Mounted Side Air Bags (SABs): Located in the outboard side of the front
seats. The SABs are marked with a “SRS AIRBAG” or “AIRBAG” label sewn into the outboard
side of the seats.
The SABs may help to reduce the risk of
occupant injury during certain side impacts
and/or vehicle rollover events, in addition
to the injury reduction potential provided
by the seat belts and body structure.
When the SAB deploys, it opens the seam
on the outboard side of the seatback’s trim
cover. The inflating SAB deploys through
the seat seam into the space between the
occupant and the door. The SAB moves at
a very high speed and with such a high
force that it could injure occupants if they
are not seated properly, or if items are
positioned in the area where the SAB inflates. Children are at an even greater risk
of injury from a deploying air bag.
Front Supplemental Seat-Mounted
Side Air Bag
WARNING!
Do not use accessory seat covers or place objects between you and the Side Air Bags; the
performance could be adversely affected and/or objects could be pushed into you, causing
serious injury.
43
G E T T I N G S TA R T E D
2. Supplemental Side Air Bag Inflatable Curtains (SABICs): Located above the side windows.
The trim covering the SABICs is labeled
“SRS AIRBAG” or “AIRBAG.”
SABICs may help reduce the risk of head
or other injuries to front and rear seat outboard occupants in certain side impacts
and/or vehicle rollover events, in addition
to the injury reduction potential provided
by the seat belts and body structure.
The SABICs deploy downward, covering
the side windows. An inflating SABIC
pushes the outside edge of the trim out of
the way and covers the window. The
SABICs inflate with enough force to injure
occupants if they are not belted and seated
properly, or if items are positioned in the
area where the SABICs inflate. Children
are at an even greater risk of injury from a
deploying air bag.
Supplemental Side Air Bag Inflatable Curtain
(SABIC) Label Location
WARNING!
• Do not stack luggage or other cargo up high enough to block the deployment of the
SABICs. The trim covering above the side windows where the SABIC and its deployment
path are located should remain free from any obstructions.
• In order for the SABICs to work as intended, do not install any accessory items in your
vehicle which could alter the roof. Do not add an aftermarket sunroof to your vehicle. Do
not add roof racks that require permanent attachments (bolts or screws) for installation on
the vehicle roof. Do not drill into the roof of the vehicle for any reason.
The SABICs and SABs (Side Air Bags) are designed to activate in certain side impacts and
certain rollover events. The Occupant Restraint Controller (ORC) determines whether the
deployment of the Side Air Bags in a particular side impact or rollover event is appropriate, based
on the severity and type of collision. Vehicle damage by itself is not a good indicator of whether
or not Side Air Bags should have deployed.
Side Air Bags are a supplement to the seat belt restraint system. Side Air Bags deploy in less time
than it takes to blink your eyes.
44
G E T T I N G S TA R T E D
WARNING!
• Occupants, including children, who are up against or very close to Side Air Bags can be
seriously injured or killed. Occupants, including children, should never lean on or sleep
against the door, side windows, or area where the side air bags inflate, even if they are in an
infant or child restraint.
• Seat belts (and child restraints where appropriate) are necessary for your protection in all
collisions. They also help keep you in position, away from an inflating Side Air Bag. To get
the best protection from the Side Air Bags, occupants must wear their seat belts properly
and sit upright with their backs against the seats. Children must be properly restrained in a
child restraint or booster seat that is appropriate for the size of the child.
WARNING!
• Side Air Bags need room to inflate. Do not lean against the door or window. Sit upright in
the center of the seat.
• Being too close to the Side Air Bags during deployment could cause you to be severely
injured or killed.
• Relying on the Side Air Bags alone could lead to more severe injuries in a collision. The Side
Air Bags work with your seat belt to restrain you properly. In some collisions, Side Air Bags
won’t deploy at all. Always wear your seat belt even though you have Side Air Bags.
NOTE:
Air bag covers may not be obvious in the interior trim, but they will open during air bag
deployment.
Side Impacts
In side impacts, the side impact sensors aid the ORC in determining the appropriate response to
impact events. The system is calibrated to deploy the Side Air Bags on the impact side of the
vehicle during impacts that require Side Air Bag occupant protection. In side impacts, the Side
Air Bags deploy independently; a left side impact deploys the left Side Air Bags only and a right
side impact deploys the right Side Air Bags only.
The Side Air Bags will not deploy in all side collisions, including some collisions at certain angles,
or some side collisions that do not impact the area of the passenger compartment. The Side Air
Bags may deploy during angled or offset frontal collisions where the front air bags deploy.
45
G E T T I N G S TA R T E D
Rollover Events
Side Air Bags are designed to activate in certain rollover events. The ORC determines whether
the deployment of the Side Air Bags in a particular rollover event is appropriate, based on the
severity and type of collision. Vehicle damage by itself is not a good indicator of whether or not
Side Air Bags should have deployed.
The Side Air Bags will not deploy in all rollover events. The rollover sensing system determines if
a rollover event may be in progress and whether deployment is appropriate. In the event the
vehicle experiences a rollover or near rollover event, and deployment of the Side Air Bags is
appropriate, the rollover sensing system will also deploy the seat belt pretensioners on both sides
of the vehicle.
The SABICs may help reduce the risk of partial or complete ejection of vehicle occupants
through side windows in certain rollover or side impact events.
The Occupant Restraint Controller (ORC) monitors the internal circuits and interconnecting
wiring associated with electrical Air Bag System Components listed below:
Air Bag System Components
• Occupant Restraint Controller (ORC)
• Air Bag Warning Light
• Steering Wheel and Column
• Instrument Panel
• Knee Impact Bolsters
• Driver and Front Passenger Air Bags
• Supplemental Side Air Bags
• Supplemental Knee Air Bags
• Front and Side Impact Sensors
• Seat Belt Pretensioners
• Seat Track Position Sensors
• Seat Belt Buckle Switch
• Occupant Classification System
If A Deployment Occurs
The front air bags are designed to deflate immediately after deployment.
NOTE:
Front and/or side air bags will not deploy in all collisions. This does not mean something is wrong
with the air bag system.
46
G E T T I N G S TA R T E D
If you do have a collision which deploys the air bags, any or all of the following may occur:
• The air bag material may sometimes cause abrasions and/or skin reddening to the occupants
as the air bags deploy and unfold. The abrasions are similar to friction rope burns or those you
might get sliding along a carpet or gymnasium floor. They are not caused by contact with
chemicals. They are not permanent and normally heal quickly. However, if you haven’t healed
significantly within a few days, or if you have any blistering, see your doctor immediately.
• As the air bags deflate, you may see some smoke-like particles. The particles are a normal
by-product of the process that generates the non-toxic gas used for air bag inflation. These
airborne particles may irritate the skin, eyes, nose, or throat. If you have skin or eye irritation,
rinse the area with cool water. For nose or throat irritation, move to fresh air. If the irritation
continues, see your doctor. If these particles settle on your clothing, follow the garment
manufacturer’s instructions for cleaning.
Do not drive your vehicle after the air bags have deployed. If you are involved in another collision,
the air bags will not be in place to protect you.
WARNING!
Deployed air bags and seat belt pretensioners cannot protect you in another collision. Have
the air bags, seat belt pretensioners, and the seat belt retractor assemblies replaced by an
authorized dealer immediately. Also, have the Occupant Restraint Controller System serviced
as well.
NOTE:
• Air bag covers may not be obvious in the interior trim, but they will open during air bag
deployment.
• After any collision, the vehicle should be taken to an authorized dealer immediately.
Enhanced Accident Response System
In the event of an impact, if the communication network remains intact, and the power remains
intact, depending on the nature of the event, the ORC will determine whether to have the
Enhanced Accident Response System perform the following functions:
• Cut off fuel to the engine.
• Flash hazard lights as long as the battery has power or until the hazard light button is pressed.
The hazard lights can be deactivated by pressing the hazard light button.
• Turn on the interior lights, which remain on as long as the battery has power.
• Unlock the power door locks.
Enhanced Accident Response System Reset Procedure
In order to reset the Enhanced Accident Response System functions after an event, the ignition
switch must be changed from ignition START or ON/RUN to ignition OFF. Carefully check the
vehicle for fuel leaks in the engine compartment and on the ground near the engine compartment and fuel tank before resetting the system and starting the engine.
47
G E T T I N G S TA R T E D
Maintaining Your Air Bag System
WARNING!
• Modifications to any part of the air bag system could cause it to fail when you need it. You
could be injured if the air bag system is not there to protect you. Do not modify the
components or wiring, including adding any kind of badges or stickers to the steering wheel
hub trim cover or the upper right side of the instrument panel. Do not modify the front
bumper, vehicle body structure, or add aftermarket side steps or running boards.
• It is dangerous to try to repair any part of the air bag system yourself. Be sure to tell anyone
who works on your vehicle that it has an air bag system.
• Do not attempt to modify any part of your air bag system. The air bag may inflate
accidentally or may not function properly if modifications are made. Take your vehicle to an
authorized dealer for any air bag system service. If your seat, including your trim cover and
cushion, needs to be serviced in any way (including removal or loosening/tightening of seat
attachment bolts), take the vehicle to your authorized dealer. Only manufacturer approved
seat accessories may be used. If it is necessary to modify the air bag system for persons with
disabilities, contact your authorized dealer.
Event Data Recorder (EDR)
This vehicle is equipped with an event data recorder (EDR). The main purpose of an EDR is to
record, in certain crash or near crash-like situations, such as an air bag deployment or hitting a
road obstacle, data that will assist in understanding how a vehicle’s systems performed. The EDR
is designed to record data related to vehicle dynamics and safety systems for a short period of
time, typically 30 seconds or less. The EDR in this vehicle is designed to record such data as:
• How various systems in your vehicle were operating;
• Whether or not the driver and passenger safety belts were buckled/fastened;
• How far (if at all) the driver was depressing the accelerator and/or brake pedal; and,
• How fast the vehicle was traveling.
These data can help provide a better understanding of the circumstances in which crashes and
injuries occur.
NOTE:
EDR data are recorded by your vehicle only if a non-trivial crash situation occurs; no data are
recorded by the EDR under normal driving conditions and no personal data (e.g., name, gender,
age, and crash location) are recorded. However, other parties, such as law enforcement, could
combine the EDR data with the type of personally identifying data routinely acquired during a
crash investigation.
To read data recorded by an EDR, special equipment is required, and access to the vehicle or the
EDR is needed. In addition to the vehicle manufacturer, other parties, such as law enforcement,
that have the special equipment, can read the information if they have access to the vehicle or the
EDR.
48
G E T T I N G S TA R T E D
Child Restraints
Everyone in your vehicle needs to be buckled up at all times, including babies and children. Every
state in the United States, and every Canadian province, requires that small children ride in
proper restraint systems. This is the law, and you can be prosecuted for ignoring it.
Children 12 years or younger should ride properly buckled up in a rear seat, if available. According
to crash statistics, children are safer when properly restrained in the rear seats rather than in the
front.
WARNING!
In a collision, an unrestrained child can become a projectile inside the vehicle. The force
required to hold even an infant on your lap could become so great that you could not hold the
child, no matter how strong you are. The child and others could be badly injured or killed. Any
child riding in your vehicle should be in a proper restraint for the child’s size.
There are different sizes and types of restraints for children from newborn size to the child almost
large enough for an adult safety belt. Always check the child seat Owner’s Manual to make sure
you have the correct seat for your child. Carefully read and follow all the instructions and warnings
in the child restraint Owner’s Manual and on all the labels attached to the child restraint.
Before buying any restraint system, make sure that it has a label certifying that it meets all
applicable Safety Standards. You should also make sure that you can install it in the vehicle where
you will use it.
NOTE:
• For additional information, refer to www.safercar.gov/parents/index.htm or call: 1–888–327–4236
• Canadian residents should refer to Transport Canada’s website for additional information:
http://www.tc.gc.ca/eng/motorvehiclesafety/safedrivers-childsafety-index-53.htm
Summary Of Recommendations For Restraining Children In Vehicles
Infants and Toddlers
Small Children
Child Size, Height, Weight
Recommended Type
or Age
of Child Restraint
Children who are two years old
Either an Infant Carrier or a
or younger and who have not
Convertible Child Restraint,
reached the height or weight facing rearward in the rear seat
limits of their child restraint
of the vehicle
Children who are at least two
Forward-Facing Child Restraint
years old or who have outwith a five-point Harness, facgrown the height or weight
ing forward in the rear seat of
limit of their rear-facing child
the vehicle
restraint
49
G E T T I N G S TA R T E D
Larger Children
Children Too Large for Child
Restraints
Child Size, Height, Weight
or Age
Children who have out-grown
their forward-facing child restraint, but are too small to
properly fit the vehicle’s seat
belt
Children 12 years old or
younger, who have out-grown
the height or weight limit of
their booster seat
Recommended Type
of Child Restraint
Belt Positioning Booster Seat
and the vehicle seat belt,
seated in the rear seat of the
vehicle
Vehicle Seat Belt, seated in the
rear seat of the vehicle
Infant And Child Restraints
Safety experts recommend that children ride rear-facing in the vehicle until they are two years old
or until they reach either the height or weight limit of their rear-facing child restraint. Two types
of child restraints can be used rear-facing: infant carriers and convertible child seats.
The infant carrier is only used rear-facing in the vehicle. It is recommended for children from birth
until they reach the weight or height limit of the infant carrier. Convertible child seats can be used
either rear-facing or forward-facing in the vehicle. Convertible child seats often have a higher
weight limit in the rear-facing direction than infant carriers do, so they can be used rear-facing by
children who have outgrown their infant carrier but are still less than at least two years old.
Children should remain rear-facing until they reach the highest weight or height allowed by their
convertible child seat.
WARNING!
• Never place a rear-facing child restraint in front of an air bag. A deploying passenger front
air bag can cause death or serious injury to a child 12 years or younger, including a child in a
rear-facing child restraint.
• Only use a rear-facing child restraint in a vehicle with a rear seat.
50
G E T T I N G S TA R T E D
WARNING!
Do not install a rear-facing car seat using a rear support leg in this vehicle. The floor of this
vehicle is not designed to manage the crash forces of this type of car seat. In a crash, the
support leg may not function as it was designed by the car seat manufacturer, and your child
may be more severely injured as a result.
Older Children And Child Restraints
Children who are two years old or who have outgrown their rear-facing convertible child seat can
ride forward-facing in the vehicle. Forward-facing child seats and convertible child seats used in
the forward-facing direction are for children who are over two years old or who have outgrown the
rear-facing weight or height limit of their rear-facing convertible child seat. Children should
remain in a forward-facing child seat with a harness for as long as possible, up to the highest
weight or height allowed by the child seat.
All children whose weight or height is above the forward-facing limit for the child seat should use
a belt-positioning booster seat until the vehicle’s seat belts fit properly. If the child cannot sit with
knees bent over the vehicle’s seat cushion while the child’s back is against the seatback, they
should use a belt-positioning booster seat. The child and belt-positioning booster seat are held in
the vehicle by the seat belt.
51
G E T T I N G S TA R T E D
WARNING!
• Improper installation can lead to failure of an infant or child restraint. It could come loose in
a collision. The child could be badly injured or killed. Follow the child restraint manufacturer’s directions exactly when installing an infant or child restraint.
• After a child restraint is installed in the vehicle, do not move the vehicle seat forward or
rearward because it can loosen the child restraint attachments. Remove the child restraint
before adjusting the vehicle seat position. When the vehicle seat has been adjusted, reinstall
the child restraint.
• When your child restraint is not in use, secure it in the vehicle with the seat belt or LATCH
anchorages, or remove it from the vehicle. Do not leave it loose in the vehicle. In a sudden
stop or accident, it could strike the occupants or seatbacks and cause serious personal injury.
Children Too Large For Booster Seats
Children who are large enough to wear the shoulder belt comfortably, and whose legs are long
enough to bend over the front of the seat when their back is against the seatback, should use the
seat belt in a rear seat. Use this simple 5-step test to decide whether the child can use the vehicle’s
seat belt alone:
1. Can the child sit all the way back against the back of the vehicle seat?
2. Do the child’s knees bend comfortably over the front of the vehicle seat – while they are still
sitting all the way back?
3. Does the shoulder belt cross the child’s shoulder between their neck and arm?
4. Is the lap part of the belt as low as possible, touching the child’s thighs and not their stomach?
5. Can the child stay seated like this for the whole trip?
If the answer to any of these questions was “no,” then the child still needs to use a booster seat in
this vehicle. If the child is using the lap/shoulder belt, check seat belt fit periodically and make sure
the seat belt buckle is latched. A child’s squirming or slouching can move the belt out of position.
If the shoulder belt contacts the face or neck, move the child closer to the center of the vehicle,
or use a booster seat to position the seat belt on the child correctly.
WARNING!
Never allow a child to put the shoulder belt under an arm or behind their back. In a crash, the
shoulder belt will not protect a child properly, which may result in serious injury or death. A
child must always wear both the lap and shoulder portions of the seat belt correctly.
52
G E T T I N G S TA R T E D
Recommendations For Attaching Child Restraints
Restraint
Type
Combined
Weight of the
Child + Child
Restraint
Rear-Facing
Child
Restraint
Rear-Facing
Child
Restraint
ForwardFacing Child
Restraint
ForwardFacing Child
Restraint
Up to 65 lbs
(29.5 kg)
More than
65 lbs
(29.5 kg)
Up to 65 lbs
(29.5 kg)
Use Any Attachment Method Shown With An “X” Below
LATCH –
Seat Belt
LATCH –
Seat Belt +
Lower AnOnly
Lower AnTop Tether
chors Only
chors + Top
Anchor
Tether Anchor
X
X
X
X
More than
65 lbs
(29.5 kg)
X
X
Lower Anchors And Tethers For CHildren (LATCH) Restraint System
Your vehicle is equipped with the child restraint
anchorage system called LATCH, which
stands for Lower Anchors and Tethers for
CHildren. The LATCH system has three vehicle anchor points for installing LATCHequipped child seats. There are two lower anchorages located at the back of the seat
cushion where it meets the seatback and one
LATCH Label
top tether anchorage located behind the seating position. These anchorages are used to
install LATCH-equipped child seats without using the vehicle’s seat belts. Some seating positions
may have a top tether anchorage but no lower anchorages. In these seating positions, the seat
belt must be used with the top tether anchorage to install the child restraint. Please see the
following table for more information.
53
G E T T I N G S TA R T E D
LATCH Positions For Installing Child Restraints In This Vehicle
7 Passenger LATCH Positions
8 Passenger LATCH Positions
— Lower Anchorage Symbol 2 anchorages per seating position
— Top Tether Anchorage Symbol
Frequently Asked Questions About Installing Child Restraints With LATCH
Use the LATCH anchorage system
What is the weight limit (child’s
until the combined weight of the
weight + weight of the child
child and the child restraint is 65 lbs
restraint) for using the LATCH
65 lbs (29.5 kg)
(29.5 kg). Use the seat belt and
anchorage system to attach the
tether anchor instead of the
child restraint?
LATCH system once the combined
weight is more than 65 lbs (29.5 kg).
Do not use the seat belt when you
use the LATCH anchorage system
to attach a rear-facing or forwardCan the LATCH anchorages and
facing child restraint.
the seat belt be used together to
No
Booster seats may be attached to
attach a rear-facing or forwardthe LATCH anchorages if allowed
facing child restraint?
by the booster seat manufacturer.
See your booster seat owner’s
manual for more information.
Never “share” a LATCH anchorage
with two or more child restraints. If
the center position does not have
Can two child restraints be attached
dedicated LATCH lower anchorusing a common lower LATCH
No
ages, use the seat belt to install a
anchorage?
child seat in the center position next
to a child seat using the LATCH
anchorages in an outboard position.
54
G E T T I N G S TA R T E D
Frequently Asked Questions About Installing Child Restraints With LATCH
The child seat may touch the back
of the front passenger seat if the
Can the rear-facing child restraint
child restraint manufacturer also
touch the back of the
Yes
allows contact. See your child refront passenger seat?
straint owner’s manual for more
information.
The 2nd row head restraints on
bench and fixed quad seats are removable. 2nd row outboard stow 'n
Can the head restraints
go head restraints are not removYes
be removed?
able. The 3rd row center head restraint is removable in all vehicles,
but the 3rd row outboard head restraints are not removable.
NOTE:
If the folding, non-adjustable head restraint interferes with the installation of the child restraint,
the head restraint may be folded and the child seat installed in front of it.
WARNING!
Always make sure the head restraint is in its upright position when the seat is to be used by an
occupant who is not in a child restraint. Sitting in a seat with the head restraint in its lowered
position could result in serious injury or death in a collision.
Car Seat With Head Restraint Folded
1 – Folded Headrest
2 – Child Restraint
55
G E T T I N G S TA R T E D
Locating The LATCH Anchorages
The lower anchorages are round bars that are found at the rear of the seat cushion where it
meets the seatback, below the anchorage symbols on the seatback. They are just visible when you
lean into the rear seat to install the child restraint. You will easily feel them if you run your finger
along the gap between the seatback and seat cushion.
2nd Row LATCH Anchorages
LATCH Anchorages
(Second Row Anchorages Shown)
LATCH Anchorages
(Third Row 60/40 Anchorages Shown)
56
G E T T I N G S TA R T E D
Locating The Upper Tether Anchorages
There are tether strap anchorages located behind all second row seating positions. The third
row has a tether anchor on the 40% seat for the right outboard position and in the center of the
60% seat for either the center or left outboard seating position. All tether anchorages are located
on the back of the seat, near the floor.
LATCH-compatible child restraint systems will
be equipped with a rigid bar or a flexible strap
on each side. Each will have a hook or connector to attach to the lower anchorage and a way
to tighten the connection to the anchorage.
Forward-facing child restraints and some rearfacing child restraints will also be equipped with
a tether strap. The tether strap will have a hook
at the end to attach to the top tether anchorage
and a way to tighten the strap after it is attached to the anchorage.
Center Seat LATCH
This vehicle has 4 lower LATCH anchorages in
Tether Strap Anchorages
the third row, rear seat. Anchorages A and B
(Third Row 60/40 Anchorage Shown)
are used for the right outboard position behind
the front passenger (1). Anchorages C and D
are used for the center seating position (2). The left outboard position (3) does not have lower
anchorages. Do not install a child restraint using anchorages B and C. This is not a LATCH
position in your vehicle.
If a child restraint installed in the center position
blocks the seat belt webbing or buckle for the
outboard position, do not use that outboard
position. If a child seat in the center position
blocks the outboard LATCH anchors or seat
belt, do not install a child seat in that outboard
position.
Center Seat LATCH Positions
57
G E T T I N G S TA R T E D
WARNING!
• Use anchorages C and D to install a LATCH-compatible child restraint in the center seating
position (2). Do not install a LATCH-compatible child restraint using anchorages B and C.
This is not a LATCH-compatible position in your vehicle.
• Never use the same lower anchorage to attach more than one child restraint. Please refer to
"Installing The LATCH-Compatible Child Restraint System" for typical installation instructions.
Always follow the directions of the child restraint manufacturer when installing your child
restraint. Not all child restraint systems will be installed as described here.
To Install A LATCH-Compatible Child Restraint
If the selected seating position has a Switchable Automatic Locking Retractor (ALR) seat belt,
stow the seat belt, following the instructions below. See the section “Installing Child Restraints
Using The Vehicle Seat Belt” to check what type of seat belt each seating position has.
1. Loosen the adjusters on the lower straps and on the tether strap of the child seat so that you
can more easily attach the hooks or connectors to the vehicle anchorages.
2. Place the child seat between the lower anchorages for that seating position. For some second
row seats, you may need to recline the seat and/or raise the head restraint to get a better fit. If
the rear seat can be moved forward and rearward in the vehicle, you may wish to move it to its
rear-most position to make room for the child seat. You may also move the front seat forward
to allow more room for the child seat.
3. Attach the lower hooks or connectors of the child restraint to the lower anchorages in the
selected seating position.
4. If the child restraint has a tether strap, connect it to the top tether anchorage. See the section
“Installing Child Restraints Using The Top Tether Anchorage” for directions to attach a tether
anchor.
5. Tighten all of the straps as you push the child restraint rearward and downward into the seat.
Remove slack in the straps according to the child restraint manufacturer’s instructions.
6. Test that the child restraint is installed tightly by pulling back and forth on the child seat at the
belt path. It should not move more than 1 inch (25.4 mm) in any direction.
58
G E T T I N G S TA R T E D
How To Stow An Unused Switchable-ALR (ALR) Seat Belt:
When using the LATCH attaching system to install a child restraint, stow all ALR seat belts that
are not being used by other occupants or being used to secure child restraints. An unused belt
could injure a child if they play with it and accidentally lock the seat belt retractor. Before installing
a child restraint using the LATCH system, buckle the seat belt behind the child restraint and out
of the child’s reach. If the buckled seat belt interferes with the child restraint installation, instead
of buckling it behind the child restraint, route the seat belt through the child restraint belt path
and then buckle it. Do not lock the seat belt. Remind all children in the vehicle that the seat belts
are not toys and that they should not play with them.
WARNING!
• Improper installation of a child restraint to the LATCH anchorages can lead to failure of the
restraint. The child could be badly injured or killed. Follow the child restraint manufacturer’s
directions exactly when installing an infant or child restraint.
• Child restraint anchorages are designed to withstand only those loads imposed by
correctly-fitted child restraints. Under no circumstances are they to be used for adult seat
belts, harnesses, or for attaching other items or equipment to the vehicle.
Installing Child Restraints Using The Vehicle Seat Belt
Child restraint systems are designed to be secured in vehicle seats by lap belts or the lap belt
portion of a lap/shoulder belt.
WARNING!
• Improper installation or failure to properly secure a child restraint can lead to failure of the
restraint. The child could be badly injured or killed.
• Follow the child restraint manufacturer’s directions exactly when installing an infant or child
restraint.
The seat belts in the passenger seating positions are equipped with a Switchable Automatic
Locking Retractor (ALR) that is designed to keep the lap portion of the seat belt tight around the
child restraint so that it is not necessary to use a locking clip. The ALR retractor can be “switched”
into a locked mode by pulling all of the webbing out of the retractor and then letting the webbing
retract back into the retractor. If it is locked, the ALR will make a clicking noise while the webbing
is pulled back into the retractor. Refer to the “Automatic Locking Mode” description in “Switchable Automatic Locking Retractors (ALR)” under “Occupant Restraint Systems” for additional
information on ALR.
59
G E T T I N G S TA R T E D
Please see the table below and the following sections for more information.
Lap/Shoulder Belt Systems For Installing Child Restraints In This Vehicle
8 Passenger LATCH Positions
7 Passenger LATCH Positions
ALR = Switchable Automatic Locking Retractor
— Top Tether Anchorage Symbol
Frequently Asked Questions
What is the weight limit (child’s
weight + weight of the child
restraint) for using the Tether
Anchor with the seat belt to
attach a forward facing child
restraint?
Weight limit of the
Child Restraint
Can the rear-facing child restraint touch the back of the
front passenger seat?
Yes
Can the head restraints be
removed?
Yes
Can the buckle stalk be twisted
to tighten the seat belt against
the belt path of the child
restraint?
No
Always use the tether anchor
when using the seat belt to
install a forward facing child
restraint, up to the recommended weight limit of the
child restraint.
Contact between the front
passenger seat and the child
restraint is allowed, if the child
restraint manufacturer also
allows contact.
The 2nd row head restraints on
bench and fixed quad seats,
and in the center seat (if
equipped) are removable. 2nd
row stow 'n go head restraints
are not removable. The 3rd
row center head restraint is
removable in all vehicles, but
the 3rd row outboard head
restraints are not removable.
Do not twist the buckle stalk in
a seating position with an ALR
retractor.
NOTE:
If the folding, non-adjustable head restraint interferes with the installation of the child restraint,
the head restraint may be folded and the child seat installed in front of it.
60
G E T T I N G S TA R T E D
WARNING!
Always make sure the head restraint is in its upright position when the seat is to be used by an
occupant who is not in a child restraint. Sitting in a seat with the head restraint in its lowered
position could result in serious injury or death in a collision.
Installing A Child Restraint With A Switchable Automatic Locking Retractor
(ALR):
Child restraint systems are designed to be secured in vehicle seats by lap belts or the lap belt
portion of a lap/shoulder belt.
Car Seat With Head Restraint Folded
1 – Folded Headrest
2 – Child Restraint
WARNING!
• Improper installation or failure to properly secure a child restraint can lead to failure of the
restraint. The child could be badly injured or killed.
• Follow the child restraint manufacturer’s directions exactly when installing an infant or child
restraint.
1. Place the child seat in the center of the seating position. For some second row seats, you may
need to recline the seat and/or raise the head restraint to get a better fit. If the rear seat can be
moved forward and rearward in the vehicle, you may wish to move it to its rear-most position
to make room for the child seat. You may also move the front seat forward to allow more room
for the child seat.
2. Pull enough of the seat belt webbing from the retractor to pass it through the belt path of the
child restraint. Do not twist the belt webbing in the belt path.
3. Slide the latch plate into the buckle until you hear a “click.”
4. Pull on the webbing to make the lap portion tight against the child seat.
61
G E T T I N G S TA R T E D
5. To lock the seat belt, pull down on the shoulder part of the belt until you have pulled all the seat
belt webbing out of the retractor. Then, allow the webbing to retract back into the retractor. As
the webbing retracts, you will hear a clicking sound. This means the seat belt is now in the
Automatic Locking mode.
6. Try to pull the webbing out of the retractor. If it is locked, you should not be able to pull out any
webbing. If the retractor is not locked, repeat step 5.
7. Finally, pull up on any excess webbing to tighten the lap portion around the child restraint while
you push the child restraint rearward and downward into the vehicle seat.
8. If the child restraint has a top tether strap and the seating position has a top tether anchorage,
connect the tether strap to the anchorage and tighten the tether strap. See the section
“Installing Child Restraints Using the Top Tether Anchorage” for directions to attach a tether
anchor.
9. Test that the child restraint is installed tightly by pulling back and forth on the child seat at the
belt path. It should not move more than 1 inch (25.4 mm) in any direction.
Any seat belt system will loosen with time, so check the belt occasionally, and pull it tight if
necessary.
Seat Belt Park Stitch — If Equipped
The rear outboard seat belts may be equipped with a park stitch to raise the latch plate for easier
access to occupants. If the park stitch interferes with the tight installation of a child restraint, slide
the latch plate over the stitching to shorten the lap portion of the belt and install the car seat
following the steps above. When the car seat is removed from the vehicle, slide the latch plate
above the park stitch to enable occupants to latch the seatbelt securely.
Seat Belt Park Stitch Location
62
G E T T I N G S TA R T E D
If the park stitch interferes with the lock-off features of the child restraint, do not use the lock-off
feature. Instead, switch the seat belt to the locking mode, as described in the steps above or move
the car seat to a different seating position.
Seat Belt Park Stitch
Installing Child Restraints Using the Top Tether Anchorage
WARNING!
Do not attach a tether strap for a rear-facing car seat to any location in front of the car seat,
including the seat frame or a tether anchorage. Only attach the tether strap of a rear-facing car
seat to the tether anchorage that is approved for that seating position, located behind the top
of the vehicle seat. See the section “Lower Anchors and Tethers for CHildren (LATCH)
Restraint System” for the location of approved tether anchorages in your vehicle.
63
G E T T I N G S TA R T E D
1. Look behind the seating position where you plan to install the child restraint to find the tether
anchorage. You may need to move the seat forward to provide better access to the tether
anchorage. If there is no top tether anchorage for that seating position, move the child
restraint to another position in the vehicle if one is available.
2. Route the tether strap to provide the most
direct path for the strap between the anchor
and the child seat. If your vehicle is
equipped with adjustable rear head restraints, raise the head restraint, and where
possible, route the tether strap under the
head restraint and between the two posts. If
not possible, lower the head restraint and
pass the tether strap around the outboard
side of the head restraint.
3. Attach the tether strap hook of the child
restraint to the top tether anchorage as
shown in the diagram.
Top Tether Anchorage Locations 3rd Row
4. Remove slack in the tether strap according to the child restraint manufacturer’s instructions.
Rear Seat Tether Strap Attachment
(Second Row Anchorage Shown)
WARNING!
• An incorrectly anchored tether strap could lead to increased head motion and possible
injury to the child. Use only the anchorage position directly behind the child seat to secure
a child restraint top tether strap.
• If your vehicle is equipped with a split rear seat, make sure the tether strap does not slip into
the opening between the seatbacks as you remove slack in the strap.
64
G E T T I N G S TA R T E D
Third Row Tether Attachment
The tether anchorage found on the back of the 60% seat in the third row may be used by either
the left outboard or the center seating position. Only tether one child restraint to the tether
anchorage at a time.
To connect the tether strap hook to the tether anchorage for either seating position on the 60%
third row seat:
1. Route the tether strap to provide the most direct path for the strap between the anchor and the
child seat.
2. If the car seat is in the center, raise the center head restraint and route the tether strap around
the inboard (left) side of the head restraint support posts, as shown in the diagram.
3. Attach the tether strap hook of the child restraint to the top tether anchorage as shown in the
diagram.
4. Remove slack in the tether strap according to the child restraint manufacturer’s instructions.
Center Tether Attachment – 3rd Row
Outboard Tether Attachments – 3rd Row
WARNING!
Do not connect the tether strap for more than one child restraint to the tether anchorage on
the 60% seat in the third row. This anchorage is intended for one child restraint at a time.
65
G E T T I N G S TA R T E D
Transporting Pets
Air Bags deploying in the front seat could harm your pet. An unrestrained pet will be thrown
about and possibly injured, or injure a passenger during panic braking or in a collision.
Pets should be restrained in the rear seat in pet harnesses or pet carriers that are secured by seat
belts.
HEAD RESTRAINTS
Head restraints are designed to reduce the risk of injury by restricting head movement in the
event of a rear impact. Head restraints should be adjusted so that the top of the head restraint is
located above the top of your ear.
WARNING!
• All occupants, including the driver, should not operate a vehicle or sit in a vehicle’s seat until
the head restraints are placed in their proper positions in order to minimize the risk of neck
injury in the event of a crash.
• Head restraints should never be adjusted while the vehicle is in motion. Driving a vehicle
with the head restraints improperly adjusted or removed could cause serious injury or death
in the event of a collision.
Head Restraints — Front Seats
The front driver and passenger seats are equipped with four-way head restraints.
To raise the head restraint, pull upward on the head restraint. To lower the head restraint, push the
adjustment button, located at the base of the head restraint, and push downward. The front head
restraints are also adjustable forward and rearward. To adjust forward, pull the head restraint toward
the front of the vehicle to desired position. To adjust the head restraint rearward, pull forward on the
head restraint to furthest forward position and head restraint will reset to furthest rearward position.
66
G E T T I N G S TA R T E D
NOTE:
To remove the head restraint, raise it as far as it can go. Then, push the release button and the
adjustment button at the base of each post while pulling the head restraint up. Seatback angle
may need to be adjusted to fully remove the head restraint. To reinstall the head restraint, put the
head restraint posts into the holes and push downward. Then, adjust the head restraint to the
appropriate height.
Front Head Restraint
1 — Release Button
2 — Adjustment Button
Forward Adjustment
67
G E T T I N G S TA R T E D
WARNING!
• A loose head restraint thrown forward in a collision or hard stop could cause serious injury or
death to occupants of the vehicle. Always securely stow removed head restraints in a
location outside the occupant compartment.
• ALL the head restraints MUST be reinstalled in the vehicle to properly protect the
occupants. Follow the re-installation instructions above prior to operating the vehicle or
occupying a seat.
Head Restraints — Second Row
The second row outboard head restraints are non-adjustable. The removable 8th passenger seat
(if equipped) has an adjustable head restraint.
Head Restraints — Third Row
The outboard head restraints can be manually folded forward for improved rearward visibility.
Pull the release strap to fold them forward.
NOTE:
• The head restraints must be raised manually
when occupying the third row.
• Do not fold if there are passengers seated in
the third row seats.
The head restraint in the center position can be
raised and lowered for tether routing or height
adjustment. Refer to “Occupant Restraint Systems” in “Safety” for further information.
Release Strap
68
G E T T I N G S TA R T E D
NOTE:
To remove the center head restraint, raise it as far as it can go. Then, push the release button and
the adjustment button at the base of each post while pulling the head restraint up. To reinstall the
head restraint, put the head restraint posts into the holes and push downward. Then, using the
adjustment button, adjust the head restraint to the appropriate height.
Center Head Restraint
1 — Adjustment Button
2 — Release Button
Power Folding Third Row Head Restraints — If Equipped
For improved visibility, the third row outboard head restraints can be folded using the Uconnect
System.
Press the “Controls” button located on the bottom of the Uconnect display.
Press the Head Restraint Fold button
to power fold the third row head restraints.
NOTE:
• The head restraints can be folded downward using the Head Restraint button or using the
manual release strap. The head restraints must be raised manually when occupying the third
row.
• Do not fold if there are passengers seated in the third row seats.
69
G E T T I N G S TA R T E D
FRONT SEATS
Manual Adjustment (Front Seats)
WARNING!
• Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the
seat could cause you to lose control. The seat belt might not be adjusted properly and you
could be injured. Adjust the seat only while the vehicle is parked.
• Do not ride with the seatback reclined so that the shoulder belt is no longer resting against
your chest. In a collision you could slide under the seat belt and be seriously or even fatally
injured. Use the recliner only when the vehicle is parked.
Manual Front Adjuster
Both front seats are adjustable forward or rearward. The manual seat adjustment handle is
located under the seat cushion at the front edge of each seat.
While sitting in the seat, pull up on the handle
and slide the seat forward or rearward. Release
the bar once you have reached the desired
position. Then, using body pressure, move forward and rearward on the seat to be sure that
the seat adjusters have latched.
Manual Seat Adjuster
WARNING!
• Adjusting a seat while driving may be dangerous. Moving a seat while driving could result in
loss of control which could cause a collision and serious injury or death.
• Seats should be adjusted before fastening the seat belts and while the vehicle is parked.
Serious injury or death could result from a poorly adjusted seat belt.
70
G E T T I N G S TA R T E D
Manual Reclining Seats — If Equipped
For models equipped with manual seats, the recline lever is located on the outboard side of the
seat.
To recline, lean forward slightly, lift the lever
and push back to the desired position and release the lever. Lean forward and lift the lever to
return the seatback to its normal position. Using body pressure, lean forward and rearward
on the seat to be sure the seatback has latched.
Manual Recline Lever
WARNING!
Do not ride with the seatback reclined so that the shoulder belt is no longer resting against
your chest. In a collision you could slide under the seat belt, which could result in serious injury
or death.
Seat Height Adjustment
The driver’s seat height can be raised or lowered by using a lever, located on the outboard side of
the seat. Pump the lever upward to raise the seat height or pump the lever downward to lower the
seat height.
71
G E T T I N G S TA R T E D
Power Adjustment (Front Seats) — If Equipped
Some models may be equipped with eight-way
power seats for the driver and front passenger.
The power seat switches are located on the
outboard side of the seat. The switches control
the movement of the seat cushion and the
seatback.
Driver Power Seat Switches
1 — Seat Switch
2 — Seatback Switch
3 — Lumbar Switch
WARNING!
• Adjusting a seat while driving may be dangerous. Moving a seat while driving could result in
loss of control which could cause a collision and serious injury or death.
• Seats should be adjusted before fastening the seat belts and while the vehicle is parked.
Serious injury or death could result from a poorly adjusted seat belt.
• Do not ride with the seatback reclined so that the shoulder belt is no longer resting against
your chest. In a collision you could slide under the seat belt, which could result in serious
injury or death.
CAUTION!
Do not place any article under a power seat or impede its ability to move as it may cause
damage to the seat controls. Seat travel may become limited if movement is stopped by an
obstruction in the seat's path.
72
G E T T I N G S TA R T E D
Adjusting The Seat Forward Or Rearward
The seat can be adjusted both forward and rearward. Push the seat switch forward or rearward,
and the seat will move in the direction of the switch. Release the switch when the desired position
has been reached.
Adjusting The Seat Up Or Down
The height of the seats can be adjusted up or down. Pull upward or push downward on the rear
of seat switch, the seat will move in the direction of the switch. Release the switch when the
desired position has been reached.
Tilting The Seat Up Or Down
The angle of the seat cushion can be adjusted in two directions. Pull upward or push downward
on the front of the seat switch, the front of the seat cushion will move in the direction of the switch.
Release the switch when the desired position has been reached.
Reclining The Seatback
The angle of the seatback can be adjusted forward or rearward. Push the seatback switch forward
or rearward, the seat will move in the direction of the switch. Release the switch when the desired
position is reached.
WARNING!
• Adjusting a seat while driving may be dangerous. Moving a seat while driving could result in
loss of control which could cause a collision and serious injury or death.
• Seats should be adjusted before fastening the seat belts and while the vehicle is parked.
Serious injury or death could result from a poorly adjusted seat belt.
• Do not ride with the seatback reclined so that the shoulder belt is no longer resting against
your chest. In a collision you could slide under the seat belt, which could result in serious
injury or death.
CAUTION!
Do not place any article under a power seat or impede its ability to move as it may cause
damage to the seat controls. Seat travel may become limited if movement is stopped by an
obstruction in the seat's path.
Power Lumbar — If Equipped
Vehicles equipped with power driver or passenger seats may be equipped with power lumbar.
The power lumbar switch is located on the outboard side of the power seat. Push the switch
forward or rearward to increase or decrease the lumbar support. Push the switch upward or
downward to raise or lower the lumbar support.
73
G E T T I N G S TA R T E D
Driver Memory Seat — If Equipped
The Memory Buttons (1) and (2) on the driver's door panel can be programmed to recall the
driver's seat, outside mirrors, and radio station preset settings. Your key fobs can also be
programmed to recall the same positions when the unlock button is pushed.
Your vehicle may have been delivered with two
key fobs, one key fob can be linked to each of
the memory positions.
Programming The Memory Feature
To create a new memory profile, perform the
following:
1. Cycle the vehicle’s ignition to the ON/RUN
position (do not start the engine).
2. Adjust all memory profile settings to desired
preferences (i.e., driver’s seat, outside mirrors and radio station presets).
Driver Memory Switch
3. Push and release the set (S) button on the memory switch.
4. Within five seconds, push and release either of the memory buttons (1) or (2). The instrument
cluster display will show which memory position has been set.
NOTE:
• Memory profiles can be set without the vehicle in PARK, but the vehicle must be in PARK to
recall a memory profile.
• To set a memory profile to your key fob, refer to “Linking And Unlinking The Remote Keyless
Entry Key Fob To Memory” in this section.
Linking And Unlinking The Remote Keyless Entry Key Fob To Memory
Your key fob can be programmed to recall one of two pre-programmed memory profiles by
pushing the unlock button on the key fob.
NOTE:
Before programming your key fob you must select the “Personal Settings Linked to Key Fob”
feature through the Uconnect Settings. Refer to “Uconnect Settings” in “Multimedia” in your
Owner’s Manual on www.chrysler.com/en/owners/manuals for further information.
To program your key fob, perform the following:
1. Cycle the vehicle’s ignition to the OFF position.
2. Select a desired memory profile 1 or 2.
NOTE:
If a memory profile has not already been set, refer to "Programming The Memory Feature" in this
section for instructions on how to set a memory profile.
74
G E T T I N G S TA R T E D
3. Once the profile has been recalled, push and release the set (S) button on the memory switch.
4. Push and release button (1) or (2) accordingly. “Memory Profile Set” (1 or 2) will display in the
instrument cluster.
5. Push and release the lock button on the key fob within 10 seconds.
NOTE:
Your key fob can be unlinked to your memory settings by pushing the set (S) button, and within
10 seconds, followed by pushing the unlock button on the key fob.
Memory Position Recall
NOTE:
The vehicle must be in PARK to recall memory positions. If a recall is attempted when the vehicle
is not in PARK, a message will be displayed in the instrument cluster display.
To recall the memory settings for driver one, push memory button (1) on the driver's door or the
unlock button on the key fob linked to memory position 1.
To recall the memory setting for driver two, push memory button (2) on the driver's door or the
unlock button on the key fob linked to memory position 2.
A recall can be cancelled by pushing any of the memory buttons on the driver's door during a
recall (S, 1, or 2). When a recall is cancelled, the driver's seat stops moving. A delay of one second
will occur before another recall can be selected.
NOTE:
Pushing the mirror adjust switch will cancel the memory mirror recall.
Easy Entry/Exit Seat (Available With Memory Seat Only)
This feature provides automatic driver seat positioning to enhance driver mobility when entering
and exiting the vehicle.
The distance the driver seat moves depends on where you have the driver seat positioned when
you cycle the vehicle’s ignition to the OFF position.
• When the ignition switch transitions to the LOCK position, the driver seat will move about
2.4 inches (60 mm) rearward if the driver seat position is greater than or equal to 2.7 inches
(67.7 mm) forward of the rear stop. The seat will return to its previously set position when the
ignition switch transitions out of the LOCK position.
• When the ignition switch transitions out of the LOCK position, the driver seat will move to a
position 0.3 inches (7.7 mm) forward of the rear stop if the driver seat position is between 0.9
– 2.7 inches (22.7 – 67.7 mm) forward of the rear stop. The seat will return to its previously set
position when the ignition switch transitions out of the LOCK position.
• The Easy Entry/Easy Exit feature is disabled when the driver seat position is less than 0.9
inches (22.7 mm) forward of the rear stop. At this position, there is no benefit to the driver by
moving the seat for Easy Exit or Easy Entry.
Each stored memory setting will have an associated Easy Entry and Easy Exit Position.
75
G E T T I N G S TA R T E D
NOTE:
The Easy Entry/Easy Exit feature can be enabled or disabled through the programmable features
in the instrument cluster display. For further information, refer to “Instrument Cluster Display” in
“Getting To Know Your Instrument Panel” in your Owner’s Manual on www.chrysler.com/
en/owners/manuals.
REAR SEATS
Manual Adjustment (Rear Seats)
Manual Adjustment Precautions
WARNING!
• Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the
seat could cause you to lose control. The seat belt might not be adjusted properly and you
could be injured. Adjust the seat only while the vehicle is parked.
• Do not ride with the seatback reclined so that the shoulder belt is no longer resting against
your chest. In a collision you could slide under the seat belt and be seriously or even fatally
injured. Use the recliner only when the vehicle is parked.
Manual Recline — Quad Seats
To recline, lean forward slightly, lift the lever,
and push back to the desired position and release the lever. Lean forward and lift the lever to
return the seatback to its normal position. Using body pressure, lean forward and rearward
on the seat to be sure the seatback has latched.
Recline Lever
WARNING!
Do not ride with the seatback reclined so that the shoulder belt is no longer resting against
your chest. In a collision you could slide under the seat belt, which could result in serious injury
or death.
76
G E T T I N G S TA R T E D
Fold-Flat — Quad Seats
To fold the seat, lift the recliner lever to the full upward position and push the seatback forward
until it rests on the seat cushion.
NOTE:
• The seatback may lock into the fold flat position. Use the recline lever to unlock the seatback.
• When returning the seat to the original position, the headrest must be folded back to the
original position.
Easy Entry
Easy Tilt Seat — With Or Without Child Seat Installed
The 2nd row seats can be tilted forward for easy entry into the third row with or without a child
seat installed.
1. Located in the seatback of the second row seat is a handle that provides easier access to the
third row by tilting the seat forward.
2. To put the seat back into original position,
just pull back on the seatback and lock the
seat into position.
Easy Tilt Seat Handle
WARNING!
Do not use this feature with a child in seat. Serious injury or death my occur.
77
G E T T I N G S TA R T E D
Easy Entry — With The Seat Folded Flat
The seats can be folded and tilted for more accessibility for passengers to enter and exit the third
row.
1. Without a child seat installed, you can fold the seat by pulling the recliner handle on the
bottom part of the seat. Before pulling the recliner lever, make sure the arm rests are folded up.
2. Pull the strap on the back of the seat and the seat will tilt forward.
3. To put it back into position, pull back on the
folded seat and make sure that it locks into
position. Then, pull the seatback toward the
back and fold down the arm rests.
Exit For 3rd Row Passengers
For passengers seated in the third row, there is a
pull strap located on the outboard side of the
seat near the bottom of the seat back. Third
row passengers can pull on the strap and push
the seat forward for folding the seatback down
and tilting the seat to the floor.
Pull Strap
NOTE:
This process is for when there is no child seat installed. Use the easy entry lever if a child seat is
installed.
Stow 'n Go Seating
On vehicles equipped with Stow 'n Go seating, the second and third row seats can be folded into
the floor for convenient storage.
Stow ‘n Go Assist — If Equipped
On vehicles equipped with the Stow ‘n Go Assist feature, the front seat will move forward
automatically to a location that will allow the second row Stow ‘n Go seat movement, without
interference by the front seat. After the second row seat is stowed, the front seat will move back
to the previous location once the Stow ‘n Go Assist button is pushed again.
The Stow ‘n Go Assist feature is available to both the front driver and passenger power seats, if
equipped.
WARNING!
During power seat operation, personal injury or cargo damage may occur. Ensure the front
seat is not occupied and the seat travel path is clear.
78
G E T T I N G S TA R T E D
A one-touch Stow ‘n Go Assist button is located on the B-pillar trim panel, just in front of the
power sliding door.
Using the Stow ‘n Go Assist Feature
NOTE:
• The button is only functional when the
power sliding door is open and the vehicle is
in PARK. If the door is not open or the
vehicle is not in PARK when the button is
pushed, the front seat will not move and a
message will be displayed in instrument
cluster display.
• If the power sliding door is closing when the
button is pushed, the front seat will not
move and a message will be displayed in the
instrument cluster display.
Stow ‘n Go Assist Button
1. Push and release the Stow ‘n Go Assist button. The front seat cushion and seat back will move
as necessary to a location that will allow space for the second row Stow ‘n Go seat movement.
2. Perform the second row Stow ‘n Go seat movement. Refer to “Second Row Stow ‘n Go” for
further information.
3. Push and release the Stow ‘n Go Assist button a second time. The front seat cushion and seat
back will return to the original starting location.
NOTE:
• To abort seat operation while seat is in motion, push the Stow n’ Go Assist button, or push the
front power seat button to stop the seat movement. Pushing the Stow ‘n Go Assist button
again will return the front seat to the original starting location.
• The Stow ‘n Go Assist system includes obstacle detection. When the system detects an
obstacle, the seat will stop, reverse direction, and return to the previous location. A message
will be displayed in the instrument cluster indicating that an obstacle has been detected.
• If the front seat is already in a location that will allow space for Stow ‘n Go of the second row
seat, the front seat will not move and a message will be displayed in the instrument cluster.
• If calibration of the front seat is lost, the seat will automatically re-calibrate when the Stow ‘n
Go Assist button is pushed. This may result in the seat cushion moving forward and downward,
before moving to the location that will allow space for the second row Stow ‘n Go seat
movement.
Second Row Stow 'n Go
For Manual Seats: To stow the seat in the floor, move the front seat all the way forward using the
manual seat adjustment bar. Move the seat back all the way forward using the recliner handle
located on the outboard side of the cushion. Move the seat height to at least mid position using
the height adjuster handle in the outboard side of the cushion.
79
G E T T I N G S TA R T E D
For Power Seats: Push the Stow ‘n Go Assist button located on the B pillar trim (if equipped.)
Refer to "Stow 'n Go Assist - If Equipped" in this section for instructions.
1. To access the storage bin, place the lock rod in the locked position.
NOTE:
• Push the lock rod inward for the locked position.
• Pull outward on the lock rod for the unlocked position.
• For information on storage bin function with the seats rearward refer to “Internal Equipment” in “Getting To Know Your Vehicle” in the Owner’s Manual on www.chrysler.com/
en/owners/manuals for further information.
2. Pull the latch located near the second row seat to open the floor panel.
3. Pull the floor panel and position it toward the front seats while folding the top half down and
rest it against the front seats.
Push Panel Forward
80
G E T T I N G S TA R T E D
4. Fold the armrest upward and stow the seat by grabbing the strap on the lower part of the back
seat and guide the seat into the tub.
5. Push down on the seat back to lock the seat in the tub.
Push To Lock
6. Close the floor by pulling the floor panel
backwards by the bottom corner edge of the panel.
7. Push down on floor panel to lock into place.
8. Readjust the front seat as needed.
Refer to “Stow ‘n Go” in “Getting to Know Your Vehicle” in the Owner’s Manual on www.chrysler.com/
en/owners/manuals for additional information.
WARNING!
In a collision, serious injury could result if the seat storage bin covers are not properly latched:
• Do not drive the vehicle with the storage bin covers open.
• Keep the storage bin covers closed and latched while the vehicle is in motion.
• Do not use a storage bin latch as a tie down.
CAUTION!
• The storage bin cover must be locked and flat to avoid damage from contact with the front
seat tracks, which have minimal clearance to the cover.
• Do not sit on the second row seat when it is in the stowed position with the seatback upright
otherwise damage to the seat may occur.
81
G E T T I N G S TA R T E D
To Unstow Second Row Seats
For Manual Seats: To unstow the seat from the floor, move the front seat all the way forward
using the manual seat adjustment bar.
For Power Seats: Push the Stow ‘n Go Assist button located on the B pillar trim (if equipped).
Refer to "Stow 'n Go Assist - If Equipped" in this section for instructions.
1. To access the storage bin, place the lock rod in the locked position.
NOTE:
• Push the lock rod inward for the locked position.
• Pull outward on the lock rod for the unlocked position.
2. Pull the latch located near the second row seat to open the floor panel.
3. Pull the floor panel and position it toward the front seats while folding the top half down and
rest it against the front seats.
4. Pull the strap located on the seat and pull the seat out of the storage bin. Push the seat
rearward making sure that it locks into the floor. Fold the seatback into the upright position
and pull the headrest up.
NOTE:
The seatback may be locked, if it is, it will be necessary to use the recliner handle to unlock the
back before folding into the upright position.
5. To position the floor panel back into its original state, grab the bottom corner and extend it
outward.
6. Lay the floor panel flat and push down until it clicks into position. Replace the floor mat as
needed.
7. Readjust the front seat as needed.
Refer to “Stow ‘n Go” in “Getting to Know Your Vehicle” in the Owner’s Manual on www.chrysler.com/
en/owners/manuals for additional information.
WARNING!
• In a collision, you or others in your vehicle could be injured if seats are not properly latched
to their floor attachments. Always be sure the seats are fully latched.
• Sitting in a seat with the head restraint in its lowered position could result in serious injury or
death in a collision. Always make sure the head restraints are in their upright positions when
the seat is to be occupied.
82
G E T T I N G S TA R T E D
Second Row Removable 8th Seat — If Equipped
While the 8th seat does not stow in the floor, it is foldable and removable for added cargo space.
The release strap is located on the front of the seat, near the floor. To remove the seat, pull the
release strap to release the rear latches. The seat assembly can now be removed from the vehicle
by moving it in a rearward direction from the detent positions in the floor.
NOTE:
Seat can be removed easier with one outboard seat stowed in the load floor.
To reinstall the seat, align the seat into the detent positions on the floor. Tilt seat rearward to lock
the seat back into its original position.
WARNING!
If not properly latched, the seat could become loose. Personal injuries could result.
Manually Folding Third Row Seats — If Equipped
1. Lower the center head restraint down to the seatback by pushing the button on the guide and
pushing the head restraint down.
2. Pull release strap marked “1” to release the anchors.
3. Pull release strap marked “2” and tumble the seat rearward into the storage bin.
To Unfold Third Row Seats
1. Pull up on the assist strap to lift the seat out of the storage bin and push the seat forward until
the anchors latch.
2. Pulling strap “2” releases the seatback to return to its full upright position.
3. Raise the head restraint to its upright position.
WARNING!
• In a collision, you or others in your vehicle could be injured if seats are not properly latched
to their floor attachments. Always be sure the seats are fully latched.
• Sitting in a seat with the head restraint in its lowered position could result in serious injury or
death in a collision. Always make sure the head restraints are in their upright positions when
the seat is to be occupied.
83
G E T T I N G S TA R T E D
Power Adjustment (Rear Seats) — If Equipped
WARNING!
• Adjusting a seat while driving may be dangerous. Moving a seat while driving could result in
loss of control which could cause a collision and serious injury or death.
• Seats should be adjusted before fastening the seat belts and while the vehicle is parked.
Serious injury or death could result from a poorly adjusted seat belt.
• Do not ride with the seatback reclined so that the shoulder belt is no longer resting against
your chest. In a collision you could slide under the seat belt, which could result in serious
injury or death.
• Do not place the seat belt webbing behind the third row stow clip when using the seat belt
to restrain an occupant. The seat belt will not be positioned properly on the occupant and
they could be more seriously injured in an accident as a result.
CAUTION!
Do not place any article under a power seat or impede its ability to move as it may cause
damage to the seat controls. Seat travel may become limited if movement is stopped by an
obstruction in the seat's path.
Third Row Power Recline — If Equipped
The power recline feature, located on the trim panel next to the seat, adjusts the seatback angle
forward/rearward for occupant comfort.
Reclining The Seatback
The angle of the seatback can be adjusted forward or rearward. Push and hold the forward or
rearward button, the seat will move in the direction of the button push. Release the button when
the desired position is reached.
Third Row Power Stow ‘n Go Seat — If Equipped
A one-touch power folding seat switch is located in the right rear trim panel as part of a switch
bank.
NOTE:
The third row outboard seat belts may interfere with the power folding of the seat. Place the seat
belt webbing behind the stow clip before stowing or opening the seat. When the seat is in the
desired position, remove the webbing from the stow clip so that it is ready for use. Never leave the
seat belt in the stow clip when it is used to restrain an occupant.
NOTE:
• The outer head restraints will lower automatically as necessary when the power seat begins to
move.
• The center head restraint raises and lowers manually but will not lower automatically.
84
G E T T I N G S TA R T E D
• The head restraint can also be lowered manually using the pull strap located at the back off the
seat. Refer to "Head Restraints - Third Row" in "Head Restraints" for further information.
The switch is only functional when the liftgate is open and the vehicle is in PARK.
The rear switch bank allows multiple power folding and unfolding positions for the third row seats.
Left and right third row seats can be folded individually or together. The third row power folding
seat adjusts to the following positions using the switch bank located on the left rear trim panel:
To move the selected seat(s) to the Normal
(seated) position, push and release the Normal
button. The seat will automatically stop when
the Normal position is reached.
To move the selected seat(s) to the stow position, push and release the Stow button. The
seat will automatically stop when the Stow position is reached.
To move the selected seat(s) back in the forward or reverse direction, push and hold the
Fold forward or rearward button. Release the
button when the desired position is reached.
NOTE:
1. Disconnect the center shoulder belt from
the mini-buckle before attempting to fold/
stow the power third row seats.
Rear Panel Power Switch Bank
1 — Open To Normal
2 — Stow
3 — Fold Forward/Rearward
4 — Right/Left Seats/Both Seats
2. Before pushing the Open To Normal or Stow switch, place the outboard seat belt webbing
behind the stow clips located on the rear trim panel. When the seat reaches the desired
position, remove the webbing from the clip so it is ready for use to restrain an occupant.
Stowed Seat Belt
85
G E T T I N G S TA R T E D
3. To abort seat operation while seat is in motion, push a different seat position selector switch to
stop the seat. Once the seat stops moving, then the desired position can be selected.
4. The third row power seat system includes obstacle detection. When the system detects an
obstacle, the motors will stop and reverse direction. Should this occur, remove the obstacle
before pushing the button again.
HEATED/VENTILATED SEATS
Front Heated Seats — If Equipped
The front heated seats control buttons are located within the climate or controls screen of the
touchscreen.
You can choose from HI, LO or OFF heat settings. The indicator lights in each switch indicate the
level of heat in use. Two indicator lights will illuminate for HI, one for LO and none for OFF.
• Press the heated seat button
once to turn the HI setting ON.
• Press the heated seat button
a second time to turn the LO setting ON.
• Press the heated seat button
a third time to turn the heating elements OFF.
If the HI-level setting is selected, the system will automatically switch to LO-level after approximately 60 minutes of continuous operation. At that time, the display will change from HI to LO,
indicating the change. The LO-level setting will turn OFF automatically after approximately
45 minutes.
NOTE:
• Once a heat setting is selected, heat will be felt within two to five minutes.
• The engine must be running for the heated seats to operate.
Vehicles Equipped With Remote Start
On models that are equipped with remote start, the heated seats can be programmed to come on
during a remote start.
This feature can be programmed through the Uconnect system. Refer to “Uconnect Settings” in
“Multimedia” in the Owner's Manual on www.chrysler.com/en/owners/manuals.
WARNING!
• Persons who are unable to feel pain to the skin because of advanced age, chronic illness,
diabetes, spinal cord injury, medication, alcohol use, exhaustion or other physical condition
must exercise care when using the seat heater. It may cause burns even at low temperatures,
especially if used for long periods of time
• Do not place anything on the seat or seatback that insulates against heat, such as a blanket or
cushion. This may cause the seat heater to overheat. Sitting in a seat that has been overheated
could cause serious burns due to the increased surface temperature of the seat.
86
G E T T I N G S TA R T E D
Rear Heated Seats — If Equipped
On some models, the second row seats are equipped with heaters. There are two heated seat
switches that allow the second row passengers to operate the seats independently. The heated
seat switches are located on the sliding side door handle trim panels.
You can choose from HI, LO or OFF heat
settings. Amber indicator lights in each switch
indicate the level of heat in use. Two indicator
lights will illuminate for HI, one for LO and
none for OFF.
Push the switch once to select HI-level heating.
Push the switch a second time to select LOlevel heating. Push the switch a third time to
shut the heating elements OFF.
NOTE:
Once a heat setting is selected, heat will be felt
within two to five minutes.
Second Row Heated Seat Switch
When the HI-level setting is selected, the heater will provide a boosted heat level during the initial
stages of operation. Then, the heat output will drop to the normal HI-level. If the HI-level setting
is selected, the system will automatically switch to LO-level after approximately 60 minutes of
continuous operation. At that time, the display will change from HI to LO, indicating the change.
The LO-level setting will turn OFF automatically after approximately 45 minutes.
Ventilated Seats — If Equipped
Located in the first row seat cushions are small fans that draw the air from the passenger compartment and move air through fine perforations in the seat cover to help keep the driver and front
passenger cooler in higher ambient temperatures. The fans operate at two speeds, HI and LO.
The front ventilated seats control buttons are located within the climate or controls screen of the
touchscreen.
• Press the ventilated seat button
once to choose HI.
• Press the ventilated seat button
a second time to choose LO.
• Press the ventilated seat button
a third time to turn the ventilated seat OFF.
NOTE:
The engine must be running for the ventilated seats to operate.
Vehicles Equipped With Remote Start
On models that are equipped with remote start, the ventilated seats can be programed to come
on during a remote start.
This feature can be programmed through the Uconnect system. Refer to “Uconnect Settings” in
“Multimedia” in the Owner's Manual on www.chrysler.com/en/owners/manuals for further information.
87
G E T T I N G S TA R T E D
STEERING WHEEL
Tilt/Telescoping Steering Column
This feature allows you to tilt the steering column upward or downward. It also allows you to
lengthen or shorten the steering column. The tilt/telescoping lever is located left of the steering
wheel at the end of the steering column.
To unlock the steering column, push the lever
downward (toward the floor). To tilt the steering column, move the steering wheel upward or
downward as desired. To lengthen or shorten
the steering column, pull the steering wheel
outward or push it inward as desired. To lock the
steering column in position, push the lever upward until fully engaged.
Tilt/Telescoping Lever
WARNING!
Do not adjust the steering column while driving. Adjusting the steering column while driving
or driving with the steering column unlocked, could cause the driver to lose control of the
vehicle. Failure to follow this warning may result in serious injury or death.
88
G E T T I N G S TA R T E D
Heated Steering Wheel
The steering wheel contains a heating element that helps warm your hands in cold weather. The
heated steering wheel has only one temperature setting. Once the heated steering wheel has
been turned on, it will operate for an average of 80 minutes or more before automatically shutting
off. This time may vary depending on the temperature of the environment. The heated steering
wheel can shut off early or may not turn on when the steering wheel is already warm.
The heated steering wheel control button is located within the Uconnect system. You can gain
access to the control button through the climate screen or the controls screen.
• Press the heated steering wheel button
once to turn the heating element on.
• Press the heated steering wheel button
a second time to turn the heating element off.
NOTE:
The engine must be running for the heated steering wheel to operate.
Vehicles Equipped With Remote Start
On models that are equipped with remote start, the heated steering wheel can be programmed to come
on during a remote start through the Uconnect system. Refer to “Uconnect Settings” in “Multimedia” in
the Owner’s Manual on www.chrysler.com/en/owners/manuals for further information.
WARNING!
• Persons who are unable to feel pain to the skin because of advanced age, chronic illness,
diabetes, spinal cord injury, medication, alcohol use, exhaustion, or other physical conditions must exercise care when using the steering wheel heater. It may cause burns even at
low temperatures, especially if used for long periods.
• Do not place anything on the steering wheel that insulates against heat, such as a blanket or
steering wheel covers of any type and material. This may cause the steering wheel heater to
overheat.
89
O P E R AT I N G YO U R V E H I C L E
ENGINE BREAK-IN RECOMMENDATIONS
A long break-in period is not required for the engine and drivetrain (transmission and axle) in your
vehicle.
Drive moderately during the first 300 miles (500 km). After the initial 60 miles (100 km), speeds
up to 50 or 55 mph (80 or 90 km/h) are desirable.
While cruising, brief full-throttle acceleration within the limits of local traffic laws contributes to a good
break-in. Wide-open throttle acceleration in low gear can be detrimental and should be avoided.
The engine oil installed in the engine at the factory is a high-quality energy conserving type
lubricant. Oil changes should be consistent with anticipated climate conditions under which
vehicle operations will occur. For the recommended viscosity and quality grades, refer to “Fluids
And Lubricants” in “Maintaining Your Vehicle”.
CAUTION!
Never use Non-Detergent Oil or Straight Mineral Oil in the engine or damage may result.
NOTE:
A new engine may consume some oil during its first few thousand miles (kilometers) of operation.
This should be considered a normal part of the break-in and not interpreted as a problem.
HEADLIGHT SWITCH
The headlight switch is located on the left side of the instrument panel. The switch controls the
operation of the headlights, parking lights, instrument panel lights, interior lights and the fog lights.
Rotate the headlight switch clockwise to the
second detent for parking light and instrument
panel light operation. Rotate the headlight
switch to the third detent for headlight, parking
light and instrument panel operation.
Headlight Switch
1 — Rotate Headlight Switch
2 — Ambient Dimmer Control
3 — Instrument Panel Dimmer
4 — Fog Lamps Button
90
O P E R AT I N G YO U R V E H I C L E
Automatic Headlights
This system automatically turns your headlights on or off based on ambient light levels. To turn
the system on, turn the headlight switch to the extreme clockwise position aligning the indicator
with the AUTO on the headlight switch. When the system is on, the Headlight Time Delay
feature is also on. This means your headlights will stay on for up to 90 seconds after you turn the
ignition switch OFF. To turn the Automatic System off, turn the headlight switch counterclockwise to the O (off) position.
NOTE:
The engine must be running before the headlights will come on in the Automatic mode.
Automatic High Beam — If Equipped
The Automatic High Beam system provides increased forward lighting at night by automating
high beam control through the use of a digital camera mounted on the windshield. This camera
detects vehicle specific light and automatically switches from high beams to low beams until the
approaching vehicle is out of view.
NOTE:
Broken, muddy, or obstructed headlights and taillights of vehicles in the field of view will cause
headlights to remain on longer (closer to the vehicle). Also, dirt, film and other obstructions on
the windshield or camera lens will cause the system to function improperly.
To Activate
1. Select “Automatic High Beams — ON” through the Uconnect system. Refer to "Uconnect
Settings” in “Multimedia” in your Owner’s Manual on www.chrysler.com/en/owners/manuals
for further information.
2. Rotate the headlight switch clockwise to the AUTO position.
3. Push the multifunction lever away from you to switch the headlights to the high beam position.
Refer to “Multifunction Lever” in this section for further information.
NOTE:
This system will not activate until the vehicle is at, or above 16 mph (25 km/h).
To Deactivate
Perform either of the following steps to deactivate the Automatic High Beam system.
1. Select “Automatic High Beams — OFF” through the Uconnect System. Refer to “Uconnect
Settings” in “Multimedia” in your Owner’s Manual on www.chrysler.com/en/owners/manuals
for further information.
2. Pull the multifunction lever toward you to switch the headlights from the high beam to the low
beam position.
3. Rotate the headlight switch counterclockwise from the AUTO to the on position.
NOTE:
Once active, the Automatic High Beam system will stop functioning below 12 mph (20 km/h).
91
O P E R AT I N G YO U R V E H I C L E
Instrument Panel Dimmer Control
The instrument panel dimmer control is part of the headlight switch, and is located on the driver’s
side of the instrument panel.
With the parking lights or headlights on, rotate the instrument panel dimmer control upward or
downward to increase or decrease the brightness of the instrument panel. At the top detent of the
instrument panel dimmer, all the interior lights will also illuminate. At the bottom most setting
(extreme bottom) interior lights are turned off (dome off), and the cluster, radio and instrument
lighting go to there lowest dimmable setting.
Ambient Light Control — If Equipped
Rotate the ambient dimmer control upward or downward to increase or decrease the brightness
of the ambient light located in the overhead console, door handle lights, under I/P lights, door
map pocket lights, and cubby bin lights.
Interior Lighting Off
Rotate the right (instrument panel) dimmer control to the off position (extreme bottom). The
interior lights will remain off when the doors or liftgate are open.
Parade Mode (Daytime Brightness Feature)
Rotate the instrument panel dimmer control upward to the first detent. This feature brightens all
text displays such as the odometer, instrument cluster display, and radio when the position lights
or headlights are on.
MULTIFUNCTION LEVER
The multifunction lever is located on the left
side of the steering column. The multifunction
lever controls the turn signals, headlight high/
low beams, and flash-to-pass functions.
Turn Signals
Move the multifunction lever up or down and
the arrows on each side of the instrument cluster flash to show proper operation of the front
and rear turn signal lights.
NOTE:
If either light remains on and does not flash, or
there is a very fast flash rate, check for a defective outside light bulb. If an indicator fails to
light when the lever is moved, it would suggest
that the indicator bulb is defective.
92
Multifunction Lever
O P E R AT I N G YO U R V E H I C L E
Turn Signal Warning
If the vehicle electronics sense that the vehicle has traveled at over 18 mph (29 km/h) for about
1 mile (1.6 km) with the turn signals on, a chime will sound and a message will display in the cluster
to alert the driver.
Lane Change Assist — If Equipped
Tap the lever up or down once, without moving beyond the detent, and the turn signal (right or
left) will flash three times then automatically turn off.
High/Low Beam Switch
When the headlights are turned on, pushing the multifunction lever toward the instrument panel
will switch from low beams to high beams. Pulling back to the neutral position returns the
headlights to the low beam operation.
WINDSHIELD WIPER AND WASHERS
The wipers and washers are operated by a switch within the wiper lever. Rotate the end of the
wiper lever to select the desired wiper speed.
NOTE:
Always remove any buildup of snow that prevents the windshield wiper blades from returning to the off position. If the windshield wiper
switch is turned off and the blades cannot return to the off position, damage to the wiper
motor may occur.
Washer And Wiper Controls
WARNING!
Sudden loss of visibility through the windshield could lead to a collision. You might not see
other vehicles or other obstacles. To avoid sudden icing of the windshield during freezing
weather, warm the windshield with the defroster before and during windshield washer use.
Intermittent Wiper System
Use the intermittent wiper when weather conditions make a single wiping cycle with a variable
pause between cycles desirable. Rotate the end of the wiper lever to the first detent position, and
then turn the end of the lever to select the desired delay interval. There are four delay settings,
93
O P E R AT I N G YO U R V E H I C L E
which allow you to regulate the wipe interval from a minimum of one cycle every second to a
maximum of approximately 36 seconds between cycles. The delay intervals will double in
duration when the vehicle speed is 10 mph (16 km/h) or less.
Windshield Wiper Operation
Rotate the end of the lever upward, to the first detent past the intermittent settings for low-speed
wiper operation. Rotate the end of the lever upward to the second detent past the intermittent
settings for high-speed wiper operation.
Windshield Washers
To use the washer, pull the lever rearward toward you and hold while spray is desired. If the lever
is pulled while on the intermittent setting, the wipers will turn on and operate for several wipe
cycles after the lever is released, and then resume the intermittent interval previously selected. If
the lever is pulled while the wipers are in the off position, the wipers will operate several wipe
cycles, then turn off.
Mist Feature
Use the Mist feature when weather conditions make occasional usage of the wipers necessary.
Push the lever upward to the MIST position and release for a single wiping cycle.
NOTE:
The mist feature does not activate the washer pump; therefore, no washer fluid will be sprayed on
the windshield. The wash function must be used in order to spray the windshield with washer fluid.
Rain Sensing Wipers — If Equipped
This feature senses rain or snowfall on the windshield and automatically activates the wipers for
the driver. This feature is especially useful for road splash or overspray from the windshield
washers of the vehicle ahead. Rotate the end of the multifunction lever to one of the four
intermittent wiper sensitivity settings to activate this feature.
The sensitivity of the system is adjustable from the multifunction lever. Wiper sensitivity position
3 has been calibrated for best overall wiping sensitivity. If the operator desires more wiping
sensitivity, they may select sensitivity position 4. If the operator desires less wiping sensitivity, they
may select sensitivity positions 2 or 1. Place the multifunction lever in the OFF position when not
using the system.
NOTE:
• The Rain Sensing feature will not operate when the wiper speed is in the low or high position.
• The Rain Sensing feature may not function properly when ice or dried saltwater is present on
the windshield.
• Use of Rain-X or products containing wax or silicone may reduce rain sensor performance.
• The Rain Sensing feature can be turned on and off through the Uconnect System. Refer to
“Uconnect Settings” in “Multimedia” in the Owner’s Manual on www.chrysler.com/
en/owners/manuals for further information.
94
O P E R AT I N G YO U R V E H I C L E
The Rain Sensing system has protective features for the wiper blades and arms. It will not operate
under the following conditions:
• Low Temperature Wipe Inhibit — The Rain Sensing feature will not operate when the
ignition is first switched ON, when the vehicle is stationary and the outside temperature is
below 32°F (0°C), unless the wiper control on the multifunction lever is moved, the vehicle
speed becomes greater than 3 mph (5 km/h) or the outside temperature rises above freezing.
• Neutral Wipe Inhibit — The Rain Sensing feature will not operate when the ignition is ON,
when the transmission gear selector is in the NEUTRAL position and the vehicle speed is less
than 3 mph (5 km/h), unless the wiper control on the multifunction lever is moved, the vehicle
speed is greater than 3 mph (5 km/h) or the gear selector is moved out of the NEUTRAL
position.
• Remote Start Mode Inhibit — On vehicles equipped with Remote Starting system, Rain
Sensing wipers are not operational when the vehicle is in the remote start mode. Once the
operator is in the vehicle and has placed the ignition switch in the RUN position, rain sensing
wiper operation can resume, if it has been selected, and no other inhibit conditions (mentioned
previously) exist.
Rear Wiper And Washer
Rear Windshield Wiper Operation
Rotate the windshield wiper lever center ring upwards to operate one of two modes for the rear
window wiper:
• First detent — intermittent mode.
• Second detent — continuous mode.
Rear Windshield Washer Operation
Pushing the windshield wiper lever forward activates the rear window washer. If the lever is pushed
while on the intermittent setting, the wipers will turn on and operate for several wipe cycles after
the lever is released, and then resume the intermittent interval previously selected. If the lever is
pushed while the wipers are in the off position, the wipers will operate several wipe cycles, then
turn off.
95
O P E R AT I N G YO U R V E H I C L E
SPEED CONTROL
When engaged, the Speed Control takes over accelerator operations at speeds greater than 25
mph (40 km/h).
The Speed Control buttons are located on the right side of the steering wheel.
NOTE:
In order to ensure proper operation, the Speed
Control System has been designed to shut
down if multiple Speed Control functions are
operated at the same time. If this occurs, the
Speed Control System can be reactivated by
pushing the Speed Control on/off button and
resetting the desired vehicle set speed.
Speed Control Switches
1 — Push Cancel
2 — Push Set+/Accel
3 — Push Resume
4 — Push On/Off
5 — Push Set-/Decel
WARNING!
Speed Control can be dangerous where the system cannot maintain a constant speed. Your
vehicle could go too fast for the conditions, and you could lose control and have an accident. Do
not use Speed Control in heavy traffic or on roads that are winding, icy, snow-covered or slippery.
To Activate
Push the on/off button to activate the Speed Control. The cruise indicator light in the instrument
cluster display will illuminate. To turn the system off, push the on/off button a second time. The
cruise indicator light will turn off. The system should be turned off when not in use.
WARNING!
Leaving the Speed Control system on when not in use is dangerous. You could accidentally set
the system or cause it to go faster than you want. You could lose control and have an accident.
Always leave the system off when you are not using it.
96
O P E R AT I N G YO U R V E H I C L E
To Set A Desired Speed
Turn the Speed Control on.
NOTE:
The vehicle should be traveling at a steady speed and on level ground before pushing the SET (+)
or SET (-) button.
When the vehicle has reached the desired speed, push the SET (+) or SET (-) button and release.
Release the accelerator and the vehicle will operate at the selected speed.
To Vary The Speed Setting
To Increase Speed
When the Speed Control is set, you can increase speed by pushing the SET (+) button.
The driver’s preferred units can be selected through the Uconnect system if equipped. The
speed increment shown is dependant on the chosen speed unit of U.S. (mph) or Metric (km/h):
U.S. Speed (mph)
• Pushing the SET (+) button once will result in a 1 mph increase in set speed. Each subsequent
tap of the button results in an increase of 1 mph.
• If the button is continually pushed, the set speed will continue to increase until the button is
released, then the new set speed will be established.
Metric Speed (km/h)
• Pushing the SET (+) button once will result in a 1 km/h increase in set speed. Each subsequent
tap of the button results in an increase of 1 km/h.
• If the button is continually pushed, the set speed will continue to increase until the button is
released, then the new set speed will be established.
To Decrease Speed
When the Speed Control is set, you can decrease speed by pushing the SET (-) button.
The driver’s preferred units can be selected through the Uconnect system if equipped. The
speed increment shown is dependant on the chosen speed unit of U.S. (mph) or Metric (km/h):
U.S. Speed (mph)
• Pushing the SET (-) button once will result in a 1 mph decrease in set speed. Each subsequent
tap of the button results in a decrease of 1 mph.
• If the button is continually pushed, the set speed will continue to decrease until the button is
released, then the new set speed will be established.
Metric Speed (km/h)
• Pushing the SET (-) button once will result in a 1 km/h decrease in set speed. Each subsequent
tap of the button results in a decrease of 1 km/h.
• If the button is continually pushed, the set speed will continue to decrease until the button is
released, then the new set speed will be established.
97
O P E R AT I N G YO U R V E H I C L E
To Accelerate For Passing
Press the accelerator as you would normally. When the pedal is released, the vehicle will return to
the set speed.
To Resume Speed
To resume a previously set speed, push the RES button and release. Resume can be used at any
speed above 20 mph (32 km/h).
To Deactivate
A soft tap on the brake pedal, pushing the CANC (cancel) button, or normal brake pressure while
slowing the vehicle will deactivate the speed control without erasing the set speed from memory.
Pushing the on/off button or turning the ignition switch OFF, erases the set speed from memory.
ADAPTIVE CRUISE CONTROL (ACC )
If your vehicle is equipped with Adaptive
Cruise Control, the controls operate exactly
the same as the speed control with only a
couple of differences. With this option, you can
set a specified distance you would like to maintain between you and the vehicle in front of
you.
If the ACC sensor detects a vehicle ahead,
ACC will apply limited braking or acceleration
automatically to maintain a preset following
distance, while matching the speed of the vehicle ahead.
If the sensor does not detect a vehicle ahead of
you, ACC will maintain a fixed set speed.
ACC On/Off
• Push and release the Adaptive Cruise Control (ACC) on/off button. “ACC READY”
will appear in the instrument cluster display
to indicate the ACC is on.
Adaptive Cruise Switches
1 — Adaptive Cruise Control (ACC) On/Off
2 — Distance Setting – Decrease
3 — Distance Setting – Increase
• Push and release the Adaptive Cruise Control (ACC) on/off button a second time to turn the
system off. “ADAPTIVE CRUISE CONTROL (ACC) OFF” will appear in the instrument
cluster display to indicate the ACC is off.
98
O P E R AT I N G YO U R V E H I C L E
To Vary The Speed Setting
To Increase Speed
While ACC is set, you can increase the set speed by pushing the SET (+) button.
The driver's preferred units can be selected through the instrument panel settings if equipped.
Refer to “Uconnect Settings” in “Multimedia” in your Owner’s Manual on www.chrysler.com/
en/owners/manuals for more information. The speed increment shown is dependant on the
speed of U.S. (mph) or Metric (km/h) units:
U.S. Speed (mph)
• Pushing the SET (+) button once will result in a 1 mph increase in set speed. Each subsequent
tap of the button results in an increase of 1 mph.
• If the button is continually pushed, the set speed will continue to increase in 5 mph increments
until the button is released. The increase in set speed is reflected in the instrument cluster
display.
Metric Speed (km/h)
• Pushing the SET (+) button once will result in a 1 km/h increase in set speed. Each subsequent
tap of the button results in an increase of 1 km/h.
• If the button is continually pushed, the set speed will continue to increase in 10 km/h
increments until the button is released. The increase in set speed is reflected in the instrument
cluster display.
To Decrease Speed
While ACC is set, the can be decreased by pushing the SET (-) button.
The driver's preferred units can be selected through the instrument panel settings if equipped.
Refer to “Uconnect Settings” in “Multimedia” in your Owner’s Manual on www.chrysler.com/
en/owners/manuals for more information. The speed increment shown is dependant on the
speed of U.S. (mph) or Metric (km/h) units:
U.S. Speed (mph)
• Pushing the SET (-) button once will result in a 1 mph decrease in set speed. Each subsequent
tap of the button results in a decrease of 1 mph.
• If the button is continually pushed, the set speed will continue to decrease in 5 mph
decrements until the button is released. The decrease in set speed is reflected in the
instrument cluster display.
Metric Speed (km/h)
• Pushing the SET (-) button once will result in a 1 km/h decrease in set speed. Each subsequent
tap of the button results in a decrease of 1 km/h.
• If the button is continually pushed, the set speed will continue to decrease in 10 km/h
decrements until the button is released. The decrease in set speed is reflected in the
instrument cluster display.
99
O P E R AT I N G YO U R V E H I C L E
NOTE:
• When you override and push the SET (+) button or SET (-) buttons, the new set speed will be
the current speed of the vehicle.
• When you use the SET (-) button to decelerate, if the powertrain braking power does not slow
the vehicle sufficiently to reach the set speed, the brake system will automatically slow the
vehicle.
• The ACC system decelerates the vehicle to a full stop when following a target vehicle. If an
ACC host vehicle follows a target vehicle to a standstill, after two seconds the driver will either
have to push the RES (resume) button, or apply the accelerator pedal to reengage the ACC
to the existing set speed.
• The ACC system maintains set speed when driving up hill and down hill. However, a slight
speed change on moderate hills are normal. In addition, downshifting may occur while
climbing uphill or descending downhill. This is normal operation and necessary to maintain set
speed. When driving up hill and down hill, the ACC system will cancel if the braking
temperature exceeds normal range (overheated).
Distance Setting (ACC Only)
The specified following distance for ACC can be set by varying the distance setting between four
bars (longest), three bars (long), two bars (medium) and one bar (short). Using this distance
setting and the vehicle speed, ACC calculates and sets the distance to the vehicle ahead. This
distance setting displays in the instrument cluster display.
• To increase the distance setting, push the Distance Setting—Increase button and release. Each
time the button is pushed, the distance setting increases by one bar (longer).
• To decrease the distance setting, push the Distance Setting—Decrease button and release.
Each time the button is pushed, the distance setting decreases by one bar (shorter).
ACC Operation At Stop
If the ACC system brings your vehicle to a standstill while following a target vehicle, if the target
vehicle starts moving within two seconds of your vehicle coming to a standstill, your vehicle will
resume motion without the need for any driver action.
If the target vehicle does not start moving within two seconds of your vehicle coming to a
standstill, the driver will either have to push the RES (resume) button, or apply the accelerator
pedal to reengage the ACC. The vehicle will accelerate to the existing set speed.
NOTE:
After the ACC system holds your vehicle at a standstill for approximately three consecutive
minutes, the parking brake will be activated, and the ACC system will be cancelled.
While the ACC system is holding your vehicle at a standstill, if the driver seatbelt is unbuckled or
the driver door is opened, the parking brake will be activated, and the ACC system will be
cancelled.
100
O P E R AT I N G YO U R V E H I C L E
Changing Modes (ACC Only)
If desired, the Adaptive Cruise Control mode can be turned off and the system can be operated as
a Normal (Fixed Speed) Cruise Control mode. While in the Normal (Fixed Speed) Cruise Control
mode, the distance setting feature will be disabled and the system will maintain the speed you set.
• To change between the different cruise control modes, push the Adaptive Cruise Control
(ACC) on/off button which turns the ACC and the Normal (Fixed Speed) Cruise Control off.
• Pushing the Normal (Fixed Speed) Cruise Control on/off button will result in turning on
(changing to) the Normal (Fixed Speed) Cruise Control mode.
Refer to your Owner's Manual on www.chrysler.com/en/owners/manuals for further information.
WARNING!
Adaptive Cruise Control (ACC) is a convenience system. It is not a substitute for active
driving involvement. It is always the driver’s responsibility to be attentive of road, traffic, and
weather conditions, vehicle speed, distance to the vehicle ahead; and, most importantly, brake
operation to ensure safe operation of the vehicle under all road conditions. Your complete
attention is always required while driving to maintain safe control of your vehicle. Failure to
follow these warnings can result in a collision and death or serious personal injury.
The ACC system:
• Does not react to pedestrians, oncoming vehicles, and stationary objects (e.g., a stopped
vehicle in a traffic jam or a disabled vehicle).
• Cannot take street, traffic, and weather conditions into account, and may be limited upon
adverse sight distance conditions.
• Does not always fully recognize complex driving conditions, which can result in wrong or
missing distance warnings.
• Will bring the vehicle to a complete stop while following a target vehicle and hold the
vehicle for approximately 3 minutes in the stop position. If the target vehicle does not start
moving within 3 minutes the parking brake will be activated, and the ACC system will be
cancelled.
You should switch off the ACC system:
• When driving in fog, heavy rain, heavy snow, sleet, heavy traffic, and complex driving
situations (i.e., in highway construction zones).
• When entering a turn lane or highway off ramp; when driving on roads that are winding, icy,
snow-covered, slippery, or have steep uphill or downhill slopes.
• When towing a trailer up or down steep slopes.
• When circumstances do not allow safe driving at a constant speed.
The Cruise Control system has two control modes:
• Adaptive Cruise Control mode for maintaining an appropriate distance between vehicles.
• Normal (Fixed Speed) Cruise Control mode for cruising at a constant preset speed. For
additional information, refer to “Normal (Fixed Speed) Cruise Control Mode” section in the
Owner’s Manual on www.chrysler.com/en/owners/manuals.
Normal (Fixed Speed) Cruise Control mode will not react to preceding vehicles. Always be
aware of the mode selected.
You can change the mode by using the Cruise Control buttons. The two control modes
function differently. Always confirm which mode is selected.
101
O P E R AT I N G YO U R V E H I C L E
FORWARD COLLISION WARNING (FCW )
The Forward Collision Warning (FCW) system provides the driver with audible warnings and
visual warnings within the instrument cluster display, to warn the driver when it detects a potential
frontal collision. The warnings are intended to provide the driver with enough time to react, avoid
or mitigate the potential collision.
NOTE:
FCW monitors the information from the forward looking sensors as well as the Electronic Brake
Controller (EBC), to calculate the probability of a forward collision. When the system determines
that a forward collision is probable, the driver will be provided with audible and visual warnings.
Turning FCW On Or Off
The forward collision button is located in the Uconnect display in the controls settings.
• To turn the FCW system off, press the forward collision button once to turn the system off.
• To turn the FCW system back on, press the forward collision button again to turn the system
on.
NOTE:
• The default status of FCW is “on”, this allows the system to warn you of a possible collision with
the vehicle in front of you.
• Changing the FCW status to “off” prevents the system from warning you of a possible
collision with the vehicle in front of you. If FCW is set to “off”, “FCW OFF” will be displayed
in the instrument cluster display.
Changing FCW Status
The FCW feature has three settings and can be changed within the Uconnect System Screen:
• Far
• Medium
• Near
Far
The far setting provides warnings for potential collisions more distant in front of the vehicle,
allowing the driver to have the most reaction time to avoid a collision.
More cautious drivers that do not mind frequent warnings may prefer this setting.
NOTE:
This setting gives you the most reaction time.
Medium
The default status of FCW is the “Medium” setting and the Active Braking is in the “on” setting.
This allows the system to warn the driver of a possible collision with the vehicle in front using
audible/visual warnings and it applies autonomous braking.
102
O P E R AT I N G YO U R V E H I C L E
Near
Changing the FCW status to the “Near” setting, allows the system to warn you of a potential
frontal collision when you are much closer.
This setting provides less reaction time than the “Far” setting, which allows for a more dynamic
driving experience.
More dynamic or aggressive drivers that want to avoid frequent warnings may prefer this setting.
NOTE:
Changing the Active Braking status to “off” prevents the system from providing autonomous
braking, or additional brake support if the driver is not braking adequately in the event of a
potential frontal collision. Active braking can be turned “off” in the Uconnect controls settings.
Refer to the Owner's Manual on www.chrysler.com/en/owners/manuals for further details.
WARNING!
Forward Collision Warning (FCW) is not intended to avoid a collision on its own, nor can
FCW detect every type of potential collision. The driver has the responsibility to avoid a
collision by controlling the vehicle via braking and steering. Failure to follow this warning could
lead to serious injury or death.
NINE-SPEED AUTOMATIC TRANSMISSION
The transmission is controlled using a rotary electronic gear selector located on the center
console. The transmission gear range (PRNDL) is displayed both above the gear selector and in
the instrument cluster.
To select a gear range, simply rotate the gear
selector.
NOTE:
You must press the brake pedal to shift the
transmission out of PARK(or NEUTRAL,
when stopped or moving at low speeds).
Push down on the gear selector and then rotate
to access the L position.
Select the DRIVE range for normal driving.
When exiting the vehicle, always:
• Apply the parking brake.
• Shift the transmission into PARK.
Transmission Gear Selector
• Turn the ignition OFF.
• Remove to key fob from the vehicle.
103
O P E R AT I N G YO U R V E H I C L E
WARNING!
• Never use the PARK position as a substitute for the parking brake. Always apply the parking
brake fully when exiting the vehicle to guard against vehicle movement and possible injury
or damage.
• Your vehicle could move and injure you and others if it is not in PARK. Check by trying to
move the transmission gear selector out of PARK with the brake pedal released. Make sure
the transmission is in PARK before exiting the vehicle.
• The transmission may not engage PARK if the vehicle is moving. Always bring the vehicle
to a complete stop before shifting to PARK, and verify that the transmission gear position
indicator solidly indicates PARK (P) without blinking. Ensure that the vehicle is completely
stopped, and the PARK position is properly indicated, before exiting the vehicle.
• It is dangerous to shift out of PARK or NEUTRAL if the engine speed is higher than idle
speed. If your foot is not firmly pressing the brake pedal, the vehicle could accelerate quickly
forward or in reverse. You could lose control of the vehicle and hit someone or something.
Only shift into gear when the engine is idling normally and your foot is firmly pressing the
brake pedal.
• Unintended movement of a vehicle could injure those in or near the vehicle. As with all
vehicles, you should never exit a vehicle while the engine is running. Before exiting a vehicle,
always come to a complete stop, then apply the parking brake, shift the transmission into
PARK, and turn the ignition OFF. When the ignition is in the OFF mode, the transmission
is locked in PARK, securing the vehicle against unwanted movement.
• When exiting the vehicle, always make sure the ignition is in the OFF mode, remove the key
fob from the vehicle, and lock the vehicle.
• Never leave children alone in a vehicle, or with access to an unlocked vehicle. Allowing
children to be in a vehicle unattended is dangerous for a number of reasons. A child or
others could be seriously or fatally injured. Children should be warned not to touch the
parking brake, brake pedal or the transmission gear selector.
• Do not leave the key fob in or near the vehicle (or in a location accessible to children), and
do not leave the ignition in the ACC or ON/RUN mode. A child could operate power
windows, other controls, or move the vehicle.
NOTE:
In the event of a mismatch between the gear selector position and the actual transmission gear
(for example, driver selects PARK while driving), the position indicator will blink continuously
until the selector is returned to the proper position, or the requested shift can be completed.
104
O P E R AT I N G YO U R V E H I C L E
STOP/START SYSTEM — IF EQUIPPED
The Stop/Start function is developed to reduce fuel consumption. The system will stop the
engine automatically during a vehicle stop if the required conditions are met. Releasing the brake
pedal, pressing the accelerator pedal or shifting out of DRIVE (D) will automatically re-start the
engine.
Auto Stop/Start
The Stop/Start feature is enabled after every normal customer engine start.
At that time, the system will go into STOP/START READY and if all other
conditions are met, can go into a STOP/START AUTOSTOP ACTIVE.
To Activate Auto STOP/START, The Following Must Occur:
• The system must be in STOP/START READY state. A STOP/START
READY message will be displayed in the instrument cluster within the
Stop/Start section. Refer to “Instrument Cluster Display” in “Getting To
Know Your Instrument Panel” in your Owner’s Manual on
www.chrysler.com/en/owners/manuals for further information.
• The vehicle must be completely stopped.
• The shifter must be in a forward gear and the brake pedal depressed.
The engine will shut down, the tachometer will move to the zero position and the Stop/Start
telltale will illuminate indicating you are in Autostop. Customer settings will be maintained
throughout the Auto Stop/Start process.
Refer to the “Stop/Start System” in the “Starting And Operating” section located in your Owner’s
Manual on www.chrysler.com/en/owners/manuals for further information.
Possible Reasons The Engine Does Not Autostop
Prior to engine shut down, the system will check many safety and comfort conditions for
Stop/Start and ensure they are fulfilled. Detailed information about the operation of the
Stop/Start system may be viewed in the instrument cluster display Stop/Start screen. In the
following situations the engine will not stop:
• If Stop/Start is manually disabled by the Stop/Start Off button.
• Driver’s seat belt is not buckled.
• Driver’s door is not closed.
• Battery temperature is too warm or cold.
• Battery charge is low. During this time a message will display "Stop/Start Not Ready Battery
Charging".
• The vehicle is on a steep grade.
• Cabin heating or cooling is in process and an acceptable cabin temperature has not been
achieved.
• HVAC is set to full defrost mode at a high blower speed.
105
O P E R AT I N G YO U R V E H I C L E
• HVAC set to MAX A/C.
• Engine has not reached normal operating temperature.
• The transmission is not in a forward gear.
• Hood is open.
• Brake pedal is not pressed with sufficient pressure.
Other Factors Which Can Inhibit Autostop Include:
• Accelerator pedal input.
• Engine temp too high.
• 5 MPH threshold not achieved from previous AUTOSTOP.
• Steering angle beyond threshold.
• ACC is on and speed is set.
It may be possible for the vehicle to be driven several times without the STOP/START system
going into a STOP/START READY state under more extreme conditions of the items listed
above.
To Start The Engine While In Auto Stop/Start
While in a forward gear, the engine will start when the brake pedal is released or the throttle pedal
is depressed. The transmission will automatically re-engage upon engine restart.
Conditions That Will Cause The Engine To Start Automatically While In Auto Stop/Start:
• The transmission selector is moved out of DRIVE.
• To maintain cabin temperature comfort.
• HVAC is set to full defrost mode.
• HVAC system temperature or fan speed is manually adjusted.
• Battery voltage drops too low. During this time a message will display "Stop/Start Not Ready
Battery Charging".
• Low brake vacuum (e.g. after several brake pedal applications).
• STOP/START OFF switch is pushed.
• A STOP/START system error occurs.
106
O P E R AT I N G YO U R V E H I C L E
To Manually Turn Off The Stop/Start System
1. Push the STOP/START OFF switch (located on the instrument panel). The light on
the switch will illuminate.
2. The “STOP/START OFF” message will appear in the instrument cluster display. Refer
to or “Instrument Cluster Display” in “Getting To Know Your Instrument Panel” in your
Owner’s Manual on www.chrysler.com/
en/owners/manuals for further information.
3. At the next vehicle stop (after turning off
the STOP/START system) the engine will
not be stopped.
4. The STOP/START system will reset itself
back to an ON condition every time the
ignition is turned off and back on.
Stop/Start Button
Automatic Shutdown
This vehicle is equipped with an automatic shutdown feature. If the vehicle is left in READY
mode (vehicle running) with the gear selector in PARK for one hour after the driver exits, this
feature will automatically turn the vehicle off. Notifications have been added into this feature to
raise awareness of the timed event:
• In the interior of the vehicle, the instrument cluster will display “Ready To Drive”, and will be
accompanied by three audible chimes while exiting. These interior warnings will occur
regardless of whether the key fob remains in the vehicle or is removed.
• For the exterior of the vehicle, the horn will sound three times if the fob is removed from the
vehicle and the vehicle is in the “READY” mode.
Please consider this feature when intentionally running the vehicle for extended periods of time
over one hour. To restart the vehicle, follow the normal vehicle starting process.
NOTE:
If the vehicle is left in the ACC or RUN (engine not running) position and the transmission is in
PARK, the system will automatically time out (shut down) after an initial 30 minutes of inactivity,
followed by the additional amount of time for power accessory delay selected in the radio settings
menu. Once the vehicle times out, it will switch to the OFF position.
To Manually Turn On The Stop/Start System
After turning off the STOP/START system, push the STOP/START OFF switch again (located
on the instrument panel). The light on the switch will turn off.
For complete details on the Stop/Start System, refer to the “Stop/Start System” in the “Starting
And Operating” section located in your Owner’s Manual on www.chrysler.com/en/
owners/manuals for further information.
107
O P E R AT I N G YO U R V E H I C L E
ELECTRIC PARK BRAKE (EPB)
Your vehicle is equipped with an Electric Park Brake System (EPB) that offers simple operation,
and some additional features that make the parking brake more convenient and useful. The
Electric Park Brake Switch is located in the integrated center stack.
To engage the park brake manually, push the
Electric Park Brake Switch.
To release the park brake manually, the ignition
switch must be in the ON/RUN position. Press
on the brake pedal, then push the parking brake
switch down momentarily.
The parking brake will disengage automatically
when the ignition switch in the ON/RUN position, the transmission is in DRIVE or REVERSE, the driver seat belt is buckled, and an
attempt is made to drive away by pressing the
accelerator pedal.
NOTE:
Electric Park Brake Switch
• You may hear a slight whirring sound from
the back of the vehicle while the parking brake engages or disengages.
• Once the parking brake is fully engaged, the BRAKE warning lamp in the instrument cluster
and the LED indicator on the switch will illuminate. Once the park brake is fully disengaged,
the BRAKE warning lamp in the instrument cluster and the LED indicator on the switch will
extinguish.
• If your foot is on the brake pedal while you are engaging or disengaging the parking brake, you
may notice a small amount of brake pedal movement.
• The park brake can be engaged even when the ignition switch is OFF. However, it can only be
disengaged when the ignition switch is in the ON/RUN position.
• The EPB fault lamp will illuminate if the EPB switch is held for longer than 20 seconds in either
the released or applied position. The light will extinguish upon releasing the switch.
• Refer to “Parking Brake” in “Starting And Operating” located in your Owner’s Manual on
www.chrysler.com/en/owners/manuals for further details.
108
O P E R AT I N G YO U R V E H I C L E
WARNING!
• Never use the PARK position as a substitute for the parking brake. Always apply the parking
brake fully when exiting the vehicle to guard against vehicle movement and possible injury
or damage.
• When exiting the vehicle, always make sure the ignition is in the OFF mode, remove the key
fob from the vehicle, and lock your vehicle.
• Never leave children alone in a vehicle, or with access to an unlocked vehicle. Allowing
children to be in a vehicle unattended is dangerous for a number of reasons. A child or
others could be seriously or fatally injured. Children should be warned not to touch the
parking brake, brake pedal or the transmission gear selector.
• Do not leave the key fob in or near the vehicle, (or in a location accessible to children), and
do not leave the ignition in the ACC or ON/RUN mode. A child could operate power
windows, other controls, or move the vehicle.
• Be sure the parking brake is fully disengaged before driving; failure to do so can lead to
brake failure and a collision.
• Always fully apply the parking brake when leaving your vehicle, or it may roll and cause
damage or injury. Also be certain to leave the transmission in PARK. Failure to do so may
allow the vehicle to roll and cause damage or injury.
• Driving the vehicle with the parking brake engaged, or repeated use of the parking brake to
slow the vehicle may cause serious damage to the brake system.
CAUTION!
If the Brake System Warning Light remains on with the parking brake released, a brake system
malfunction is indicated. Have the brake system serviced by an authorized dealer immediately.
109
O P E R AT I N G YO U R V E H I C L E
MANUAL CLIMATE CONTROLS
Uconnect 8.4 Manual Climate Controls
1 — MAX A/C Button
2 — A/C Button
3 — Air Recirculation Button
4 — Front Defroster Button
5 — Rear Defroster Button
6 — Rear Climate Control Button
7 — Passenger Temperature Control
Up Button
8 — Passenger Temperature Control
Down Button
110
9 — Sync Button
10 — Blower Control Buttons
11 — Mode Control Buttons
12 — Climate Control Off Button
13 — Driver Temperature Control
Down Button
14 — Driver Temperature Control
Up Button
O P E R AT I N G YO U R V E H I C L E
SYNC Temperature Button
• Press the “SYNC” button once to control driver and passenger temperatures simultaneously.
• Press the “SYNC” button a second time to control the temperatures individually.
Air Recirculation
• Use Recirculation for maximum A/C operation.
• For window defogging, turn the Recirculation button off.
• Recirculation is allowed in floor mode and defrost/floor (mix mode) for approximately five
minutes.
Heated Mirrors
The mirrors are heated to melt frost or ice. This feature is activated whenever you turn on the rear
window defroster.
AUTOMATIC TEMPERATURE CONTROLS (ATC )
Automatic Climate Controls
1 — A/C Button
2 — Driver Temperature Control
Up Button
3 — Climate Control Off Button
4 — Mode Control Button
5 — Blower Control Knob
6 — Automatic Temperature Control
Button — If Equipped
7 — Passenger Temperature Control Up
Button
8 — FRONT Defroster Button
9 — REAR Window Defroster Button
10 — Passenger Temperature Control
Down Button
11 — Driver Temperature Control
Down Button
12 — Air Recirculation Button
111
O P E R AT I N G YO U R V E H I C L E
Uconnect 8.4 Touchscreen Automatic Climate Controls
1 — MAX A/C Button
2 — A/C Button
3 — Air Recirculation Button
4 — Automatic Temperature Control
Button — If Equipped
5 — Front Defroster Button
6 — Rear Defroster Button
7 — Rear Climate Control Button
8 — Passenger Temperature Control
Up Button
112
9 — Passenger Temperature Control
Down Button
10 — Sync Button
11 — Blower Control Buttons
12 — Mode Control Buttons
13 — Climate Control Off Button
14 — Driver Temperature Control
Down Button
15 — Driver Temperature Control
Up Button
O P E R AT I N G YO U R V E H I C L E
Automatic Operation
The climate system will automatically adjust settings to achieve and maintain comfort.
• Press the AUTO button.
• Select the desired temperature by pushing the Temperature Controls for the driver and/or
passenger.
Air Conditioning (A/C)
If the air conditioning button is pressed while in AUTO mode, the system will exit AUTO mode
and stay in A/C. The mode and blower will be set at the closest mode and blower position that the
system was operating in AUTO.
MAX A/C
MAX A/C sets the control for maximum cooling performance.
• Press and release to toggle between MAX A/C and the prior settings. The button on the
touchscreen illuminates when MAX A/C is ON.
In MAX A/C, the blower level and mode position can be adjusted to desired user settings.
Pressing other settings will cause the MAX A/C operation to switch to the prior settings and the
MAX A/C indicator will turn off.
SYNC Temperature Button
• Press the “SYNC” button once to control driver and passenger temperatures simultaneously.
• Press the “SYNC” button a second time to control the temperatures individually.
Air Recirculation
• Use Recirculation for maximum A/C operation.
• For window defogging, turn the Recirculation button off.
• If the Recirculation button is pushed while in the AUTO mode, the indicator light may flash
three times to indicate the cabin air is being controlled automatically. The Recirculation button
will be greyed out in these conditions.
Heated Mirrors
The mirrors are heated to melt frost or ice. This feature is activated whenever you turn on the rear
window defroster.
113
O P E R AT I N G YO U R V E H I C L E
PARKSENSE FRONT AND REAR PARK ASSIST
ParkSense can be enabled and disabled by pushing the ParkSense switch located on the switch
panel below the Uconnect display.
The four ParkSense sensors, located in the rear
fascia/bumper, monitor the area behind the
vehicle that is within the sensors field of view.
The sensors can detect obstacles from approximately 12 inches (30 cm) up to 79 inches
(200 cm) from the rear fascia/bumper in the
horizontal direction, depending on the location, type and orientation of the obstacle.
The six ParkSense sensors, located in the front
fascia/bumper, monitor the area in front of the
ParkSense Switch
vehicle that is within the sensors’ field of view.
The sensors can detect obstacles from approximately 12 inches (30 cm) up to 47 inches (120 cm) from the front fascia/bumper in the horizontal
direction, depending on the location, type and orientation of the obstacle.
When an object is detected within 79 inches (200 cm) behind the rear bumper while the vehicle
is in REVERSE, a warning will display in the instrument cluster display. In addition, a chime will
sound (when Sound and Display is selected from the Customer Programmable Features section
of the Uconnect System screen). As the vehicle moves closer to the object, the chime rate will
change from single 1/2 second tone (for rear only), to slow (for rear only), to fast, to continuous.
Refer to your Owner's Manual on www.chrysler.com/en/owners/manuals for further details.
ParkSense Rear Park Assist — If Equipped
The ParkSense Rear Park Assist system provides visual and audible indications of the distance
between the rear fascia and a detected obstacle when backing up, e.g. during a parking maneuver.
If your vehicle is equipped with this feature, the vehicle brakes may be automatically applied and
released when performing a reverse parking maneuver if the system detects a possible collision
with an obstacle.
The automatic braking function can be enabled/disabled from the Customer-Programmable
Features section of the Uconnect System.
ParkSense can be active only when the gear selector is in REVERSE. If ParkSense is enabled at
this gear selector position, the system will remain active until the vehicle speed is increased to
approximately 7 mph (11 km/h) or above. When in REVERSE and above the system's operating
speed, a warning will appear within the instrument cluster display indicating the vehicle speed is
too fast. The system will become active again if the vehicle speed is decreased to speeds less than
approximately 6 mph (9 km/h).
114
O P E R AT I N G YO U R V E H I C L E
ParkSense Active Park Assist System — If Equipped
The ParkSense Active Park Assist system is intended to assist the driver during parallel and
perpendicular parking maneuvers by identifying a proper parking space, providing audible/visual
instructions, and controlling the steering wheel. The ParkSense Active Park Assist system is defined
as “semi-automatic” since the driver maintains control of the accelerator, gear selector and brakes.
Depending on the driver's parking maneuver selection, the ParkSense Active Park Assist system is
capable of maneuvering a vehicle into a parallel or a perpendicular parking space on either side (i.e.,
driver side or passenger side).
NOTE:
• The driver is always responsible for controlling the vehicle, responsible for any surrounding
objects, and must intervene as required.
• The system is provided to assist the driver and not to substitute the driver.
• During a semi-automatic maneuver, if the driver touches the steering wheel after being
instructed to remove their hands from the steering wheel, the system will cancel, and the driver
will be required to manually complete the parking maneuver.
• The system may not work in all conditions (e.g. environmental conditions such as heavy rain, snow,
etc., or if searching for a parking space that has surfaces that will absorb the ultrasonic sensor waves).
• New vehicles from the dealership must have at least 30 miles (48 km) accumulated before the
ParkSense Active Park Assist system is fully calibrated and performs accurately. This is due to
the system’s dynamic vehicle calibration to improve the performance of the feature. The
system will also continuously perform the dynamic vehicle calibration to account for differences such as over or under inflated tires and new tires.
Enabling And Disabling The ParkSense Active Park Assist System
The ParkSense Active Park Assist system can be enabled and disabled with the ParkSense Active
Park Assist switch, located on the switch panel below the Uconnect display.
To enable the ParkSense Active Park Assist
system, push the ParkSense Active Park Assist
switch once (LED turns on).
To disable the ParkSense Active Park Assist
system, push the ParkSense Active Park Assist
switch again (LED turns off).
When the ParkSense Active Park Assist system is
enabled the “Active ParkSense Searching - Push
OK to Switch to Perpendicular” message will
appear in the instrument cluster display. You may
switch to perpendicular parking if you desire.
Push the OK button on the left side steering
wheel switch to change your parking space setting. You may switch back to parallel parking if
you desire.
ParkSense Active Park Assist Switch Location
Refer to your Owner's Manual on www.chrysler.com/en/owners/manuals for further details.
115
O P E R AT I N G YO U R V E H I C L E
Cleaning The ParkSense Sensors
If “PARKSENSE UNAVAILABLE WIPE REAR SENSORS" or "PARKSENSE UNAVAILABLE
WIPE FRONT SENSORS” appears in the instrument cluster display, clean the ParkSense
sensors with water, car wash soap and a soft cloth. Do not use rough or hard cloths. Do not scratch
or poke the sensors. Otherwise, you could damage the sensors.
PARKVIEW REAR BACK UP CAMERA —
IF EQUIPPED
Your vehicle may be equipped with the ParkView Rear Back Up Camera that allows you to see an
on-screen image of the rear surroundings of your vehicle whenever the gear selector is put into
REVERSE. The image will be displayed on the touchscreen display along with a caution note
“Check Entire Surroundings” across the top of the screen. After five seconds, this note will
disappear. The ParkView Rear Back Up Camera is located on the rear of the vehicle above the
rear license plate.
NOTE:
The ParkView Rear Back Up Camera has programmable modes of operation that may be
selected through the Uconnect System. Refer to “Uconnect Settings” in “Multimedia” in the
Owner’s Manual on www.chrysler.com/en/owners/manuals for further information.
When the vehicle is shifted out of REVERSE (with camera delay turned off), the rear camera
mode is exited and the navigation or audio screen appears again.
When the vehicle is shifted out of REVERSE (with camera delay turned on), the camera image
will continue to be displayed for up to 10 seconds after shifting out of REVERSE unless the
vehicle speed exceeds 8 mph (13 km/h), the vehicle is shifted into PARK or the ignition is
switched to the OFF position.
A touch screen button to disable display of the camera image is made available when the vehicle
is not in REVERSE gear. Display of the camera image after shifting out of REVERSE can be
disabled via a touch screen button personalization entry in the camera settings menu.
When enabled, active guide lines are overlaid on the image to illustrate the width of the vehicle
and its projected backup path based on the steering wheel position.
Different colored zones indicate the distance to the rear of the vehicle.
NOTE:
If snow, ice, mud, or any foreign substance builds up on the camera lens, clean the lens, rinse with
water, and dry with a soft cloth. Do not cover the lens.
116
O P E R AT I N G YO U R V E H I C L E
WARNING!
Drivers must be careful when backing up even when using the ParkView Rear Back Up
Camera. Always check carefully behind your vehicle, and be sure to check for pedestrians,
animals, other vehicles, obstructions, or blind spots before backing up. You are responsible for
the safety of your surroundings and must continue to pay attention while backing up. Failure
to do so can result in serious injury or death.
CAUTION!
• To avoid vehicle damage, ParkView should only be used as a parking aid. The ParkView
camera is unable to view every obstacle or object in your drive path.
• To avoid vehicle damage, the vehicle must be driven slowly when using ParkView to be able
to stop in time when an obstacle is seen. It is recommended that the driver look frequently
over his/her shoulder when using ParkView.
SURROUND VIEW CAMERA SYSTEM —
IF EQUIPPED
Your vehicle may be equipped with the Surround View Camera System that allows you to see an
on-screen image of the surroundings and top view of your vehicle whenever the gear selector is
put into REVERSE or a different view is selected through the "on screen soft buttons". The top
view of the vehicle will show which doors are open. The image will be displayed on the
touchscreen display along with a caution note “Check Entire Surroundings” across the top of the
screen. After five seconds, this note will disappear. The Surround View Camera System is
comprised of 4 sequential cameras located in the front grille, rear liftgate and side mirrors.
NOTE:
The Surround View Camera System has programmable settings that may be selected through
the Uconnect System. Refer to “Uconnect Settings” in “Multimedia” in the Owner’s Manual on
www.chrysler.com/en/owners/manuals for further information.
When the vehicle is shifted into REVERSE, the rear camera view & top view is the default view of
the system.
When the vehicle is shifted out of REVERSE (with camera delay turned on), the camera image will
continue to be displayed for up to 10 seconds after shifting out of REVERSE unless the vehicle speed
exceeds 8 mph (13 km/h), the vehicle is shifted into PARK or the ignition is switched to the OFF
position. There is a touch screen button (X) to disable the display of the camera image.
When the vehicle is shifted out of REVERSE (with camera delay turned off), the surround view
camera mode is exited and the last known screen appears again.
When enabled, active guide lines are overlaid on the image to illustrate the width of the vehicle,
including the side view mirrors and its projected backup path based on the steering wheel position.
Different colored zones indicate the distance to the rear of the vehicle.
117
O P E R AT I N G YO U R V E H I C L E
Modes Of Operation
Additional camera modes can be selected when the vehicle is in any gear and the surround view
camera system is activated by pressing the soft key located in the “Controls” screen or the “Apps”
screen in the Uconnect system.
Top View
The Top view will show in the Uconnect System with Rear View and Front View in a split view
display. There is integrated ParkSense arcs in the image at the front and rear of the vehicle. The
arcs will change color from yellow to red corresponding the distance zones to the oncoming
object.
NOTE:
• Front tires will be in image when the tires are turned.
• Due to wide angle cameras in mirror, the image will appear distorted.
• Top view will show which sliding doors are open.
• Open Front doors will remove outside image.
Rear View
This is the Default view of the system in REVERSE and is paired with a Top view of the vehicle
with active guide lines for the projected path when enabled.
Rear Cross Path View
Pressing the Rear Cross Path soft key will give the driver a wider angle view of the rear camera
system. The Top view will be disabled when this is selected.
Front View
The Front view will show you what is immediately in front of the vehicle with guide lines for the
projected path when enabled.
Front Cross Path View
Pressing the Front Cross Path soft key will give the driver a wider angle view of the front camera
system. The Top view will be disabled when this is selected.
Deactivation
The system can be deactivated in the following conditions:
• The speed of the vehicle reaches greater than 8 mph (13 km/h).
• The vehicle is out of REVERSE for greater than 10 seconds.
• The vehicle shifted into PARK from a different gear.
• If the vehicle is in any gear other than REVERSE, press the “X” button.
• The system is turned off manually through the Uconnect settings menu. Refer to “Uconnect
Settings” in “Multimedia” in the Owner’s Manual on www.chrysler.com/en/owners/manuals
for further information.
118
O P E R AT I N G YO U R V E H I C L E
NOTE:
• If snow, ice, mud, or any foreign substance builds up on the camera lenses, clean the lenses,
rinse with water, and dry with a soft cloth. Do not cover the lenses.
• If a malfunction with the system has occurred, see your nearest authorized dealer.
WARNING!
Drivers must be careful when backing up even when using the Surround View Camera. Always
check carefully behind your vehicle, and be sure to check for pedestrians, animals, other
vehicles, obstructions, or blind spots before backing up. You are responsible for the safety of
your surroundings and must continue to pay attention while backing up. Failure to do so can
result in serious injury or death.
CAUTION!
• To avoid vehicle damage, Surround View should only be used as a parking aid. The
Surround View camera is unable to view every obstacle or object in your drive path.
• To avoid vehicle damage, the vehicle must be driven slowly when using Surround View to be
able to stop in time when an obstacle is seen. It is recommended that the driver look
frequently over his/her shoulder when using Surround View.
BLIND SPOT MONITORING
The Blind Spot Monitoring (BSM) system uses two radar-based sensors located inside the rear
bumper fascia to detect Highway licensable vehicles (automobiles, trucks, motorcycles etc.) that
enter the blind spot zones from the rear/front/side of the vehicle.
The BSM detection zone covers approximately one lane width on both sides of the vehicle 12 ft
(3.8 m). The zone length starts at the outside rear view mirror and extends approximately 10 ft
(3 m) beyond the rear bumper of the vehicle. The BSM system monitors the detection zones on
both sides of the vehicle when the vehicle speed reaches approximately 6 mph (10 km/h) or
higher, and will alert the driver of vehicles in these areas.
When the vehicle is started, the BSM warning light will momentarily illuminate in both outside
rear view mirrors to let the driver know that the system is operational. The BSM system sensors
operate when the vehicle is in any forward gear or REVERSE and enters stand by mode when the
vehicle is in PARK.
The BSM warning light, located in the outside mirrors, will illuminate if a vehicle moves into a
blind spot zone.
The BSM system can also be configured to sound an audible (chime) alert and mute the radio to
notify you of objects that have entered the detection zones.
119
O P E R AT I N G YO U R V E H I C L E
Rear Cross Path (RCP)
The Rear Cross Path (RCP) feature is intended to aid the driver when backing out of parking
spaces where the vision of oncoming vehicles may be blocked. Proceed slowly and cautiously out
of the parking space until the rear end of the vehicle is exposed. The RCP system will then have
a clear view of the cross traffic and if an oncoming vehicle is detected, will alert the driver. When
RCP is on and the vehicle is in REVERSE, the driver is alerted using both the visual and audible
alarms, including reducing the radio volume.
Refer to “Safety Features” in “Safety” in the Owner's Manual on www.chrysler.com/en/owners/
manuals for more information.
TRI-PANE PANORAMIC SUNROOF —
IF EQUIPPED
The Tri-Pane Panoramic Sunroof switch is located to the left between the sun visors on the
overhead console.
The Power Shade switch is located to the right
between the sun visors on the overhead console.
Tri-Pane Panoramic Sunroof
And Power Shade Switches
1 — Sunroof Switch
2 — Power Shade Switch
120
O P E R AT I N G YO U R V E H I C L E
WARNING!
• Never leave children unattended in a vehicle, or with access to an unlocked vehicle. Never
leave the key fob in or near the vehicle, or in a location accessible to children. Do not leave
the ignition of a vehicle equipped with Keyless Enter-N-Go in the ACC or ON/RUN mode.
Occupants, particularly unattended children, can become entrapped by the power sunroof
while operating the power sunroof switch. Such entrapment may result in serious injury or
death.
• In a collision, there is a greater risk of being thrown from a vehicle with an open sunroof. You
could also be seriously injured or killed. Always fasten your seat belt properly and make sure
all passengers are also properly secured.
• Do not allow small children to operate the sunroof. Never allow your fingers, other body parts,
or any object, to project through the sunroof opening. Injury may result.
Opening Sunroof
Express Mode
Push the switch rearward and release it within one second. The sunroof will open automatically
from any position and stop at the full open position. This is called “Express Open.” During
Express Open operation, any other actuation of the sunroof switch will stop the sunroof.
NOTE:
If the sunshade is in the closed position when the open switch is pushed, the sunshade will
automatically cycle to the halfway open position prior to the sunroof opening.
Manual Mode
To open the sunroof, push and hold the switch rearward to full open. Any release of the switch will
stop the movement. The sunroof will remain in a partially opened condition until the sunroof
switch is pushed again.
Venting Sunroof — Express
Push and release the "Vent" button within one second and the sunroof will open to the vent
position. This is called “Express Vent”, and it will occur regardless of sunroof position.
NOTE:
If the sunshade is in the closed position when the vent switch is pushed, the sunshade will
automatically cycle to the halfway open position prior to the sunroof opening to the Vent
position.
Closing Sunroof
Express Mode
Push the switch forward and release it within one second and the sunroof will close automatically
from any position. The sunroof will close fully and stop automatically. This is called “Express
Close.” During Express Close operation, any other actuation of the switch will stop the sunroof.
121
O P E R AT I N G YO U R V E H I C L E
Manual Mode
To close the sunroof, push and hold the switch in the forward position. Any release of the switch
will stop the movement and the sunroof will remain in a partially closed condition until the sunroof
switch is pushed again.
Wind Buffeting
Wind buffeting can be described as the perception of pressure on the ears or a helicopter-type
sound in the ears. Your vehicle may exhibit wind buffeting with the windows down, or the sunroof
(if equipped) in certain open or partially open positions. This is a normal occurrence and can be
minimized. If the buffeting occurs with the rear windows open, open the front and rear windows
together to minimize the buffeting. If the buffeting occurs with the sunroof open, adjust the
sunroof opening to minimize the buffeting or open any window.
Power Sun Shade — If Equipped
Opening Power Shade — Express Mode
Push the shade switch rearward and release it within one second and the shade will open
automatically from any position. The shade will open and stop automatically at the half-open
position. Push the shade switch rearward again and release it within one second and the shade will
open automatically to the full-open position. This is called “Express Open”. During Express
Open operation, any other actuation of the shade switch will stop the shade.
Opening Power Shade — Manual Mode
To open the shade, push and hold the switch rearward. The shade will open and stop automatically at the half-open position. Push and hold the shade switch rearward again and the shade will
open automatically to the full-open position. Any release of the switch will stop the movement
and the shade will remain in a partially opened condition until the switch is pushed again.
Closing Power Shade — Express Mode
Push the switch forward and release it within one second and the shade will close automatically
from any position. If the sunroof is completely closed the shade will close fully and stop
automatically. This is called “Express Close”. During Express Close operation, any other actuation of the switch will stop the shade.
NOTE:
If the sunroof is open, the shade will close to the half-open position. Pushing the shade close
button again will automatically close both the sunroof and shade completely.
Closing Power Shade — Manual Mode
To close the shade, push and hold the switch in the forward position. Any release of the switch will
stop the movement and the shade will remain in a partially closed condition until the switch is
pushed again.
122
O P E R AT I N G YO U R V E H I C L E
Pinch Protect Feature
This feature will detect an obstruction in the opening of the sunroof during Express Close
operation. If an obstruction in the path of the sunroof is detected, the sunroof will automatically
retract. Remove the obstruction if this occurs.
NOTE:
If three consecutive sunroof close attempts result in Pinch Protect reversals, Pinch Protect will
disable and the sunroof must be closed in Manual Mode.
Sunroof Maintenance
Use only a non-abrasive cleaner and a soft cloth to clean the glass panel.
Ignition Off Operation
The power sunroof switch will remain active for up to approximately 10 minutes after the ignition
switch is turned to the OFF/LOCK position. Opening either front door will cancel this feature.
NOTE:
Ignition Off time is programmable through the Uconnect System. Refer to “Uconnect Settings”
in “Multimedia” in your Owner’s Manual on www.chrysler.com/en/owners/manuals for further
information.
WIND BUFFETING
Wind buffeting can be described as a helicopter-type percussion sound. If buffeting occurs with
the rear windows open, adjust the front and rear windows together.
If buffeting occurs with the sunroof open, adjust the sunroof opening, or adjust any window. This
will minimize buffeting.
123
ELECTRONICS
YOUR VEHICLE'S SOUND SYSTEM
1. Uconnect Phone Button pg. 180
2. Uconnect Voice Command Button pg. 145
3. Phone Hang Up Button
4. Steering Wheel Audio Controls (Left – Behind Steering Wheel) pg. 202
5. Steering Wheel Audio Controls (Right – Behind Steering Wheel) pg. 202
6. Identify Your Radio pg. 127
7. Audio Volume Control Knob
8. Touchscreen Off Button
124
ELECTRONICS
9. Browse/Tuner Control Knob
10. Back Button
11. USB Port pg. 203
12. Audio/AUX Jack pg. 203
13. Media Hub USB Port pg. 203
14. Front Power Outlet pg. 209
15. Front USB Charge Port pg. 209
125
ELECTRONICS
CYBERSECURITY
Your vehicle may be a connected vehicle and may be equipped with both wired and wireless
networks. These networks allow your vehicle to send and receive information. This information
allows systems and features in your vehicle to function properly.
Your vehicle may be equipped with certain security features to reduce the risk of unauthorized
and unlawful access to vehicle systems and wireless communications. Vehicle software technology continues to evolve over time and FCA US LLC, working with its suppliers, evaluates and
takes appropriate steps as needed. Similar to a computer or other devices, your vehicle may
require software updates to improve the usability and performance of your systems or to reduce
the potential risk of unauthorized and unlawful access to your vehicle systems.
The risk of unauthorized and unlawful access to your vehicle systems may still exist, even if the
most recent version of vehicle software (such as Uconnect software) is installed.
WARNING!
• It is not possible to know or to predict all of the possible outcomes if your vehicle’s systems
are breached. It may be possible that vehicle systems, including safety related systems,
could be impaired or a loss of vehicle control could occur that may result in an accident
involving serious injury or death.
• ONLY insert media (e.g., USB, SD card, or CD) into your vehicle if it came from a trusted
source. Media of unknown origin could possibly contain malicious software, and if installed
in your vehicle, it may increase the possibility for vehicle systems to be breached.
• As always, if you experience unusual vehicle behavior, take your vehicle to your nearest
authorized dealer immediately.
NOTE:
• FCA US LLC or your dealer may contact you directly regarding software updates.
• To help further improve vehicle security and minimize the potential risk of a security breach,
vehicle owners should:
• Routinely check www.driveuconnect.com/software-update to learn about available
Uconnect software updates.
• Only connect and use trusted media devices (e.g. personal mobile phones, USBs, CDs).
Privacy of any wireless and wired communications cannot be assured. Third parties may unlawfully intercept information and private communications without your consent. For further information, refer to “Privacy Practices - If Equipped with Uconnect 8.4 Radio” in your Uconnect
Owner’s Manual Supplement and “Onboard Diagnostic System (OBD II) Cybersecurity” in
“Getting To Know Your Instrument Panel” in your Owner’s Manual on www.chrysler.com/en/
owners/manuals.
126
ELECTRONICS
IDENTIFYING YOUR RADIO
Uconnect 5.0
• 5” Touchscreen
• Three buttons on the faceplate on either
side of the display
Uconnect 8.4
• 8.4” Touchscreen
• HD Button will not be visible on right side of
screen when viewing AM or FM
• SiriusXM Travel Link feature not listed
within Apps (US Market Only)
Uconnect 5.0
Uconnect 8.4 NAV
• 8.4” Touchscreen
• HD Button will be visible on right side of
screen when viewing AM or FM
• SiriusXM Travel Link feature listed within
Apps (US Market Only)
• Vehicle Navigation
UCONNECT ACCESS
Uconnect Access — If Equipped
(Available On Uconnect
8.4/8.4 NAV — U.S. Residents
Only)
Uconnect 8.4 NAV
WARNING!
ALWAYS drive safely with your hands on the wheel. You have full responsibility and assume all
risks related to the use of the Uconnect features and applications in this vehicle. Only use
Uconnect when it is safe to do so. Failure to do so may result in an accident involving serious
injury or death.
WARNING!
ALWAYS obey traffic laws and pay attention to the road. Some Uconnect Access services,
including 9-1-1 and Assist, will NOT work without an operable 1X (voice/data) or 3G (data)
network connection.
127
ELECTRONICS
NOTE:
Your vehicle may be transmitting data as authorized by the subscriber.
Uconnect Access enhances your ownership and driving experience by connecting your vehicle to
an operable 1X(voice/data) or 3G(data) network. When connected to an operable 1X (voice/
data) or 3G (data) network, you can:
• Place a call to a local 9-1-1 Operator for emergency assistance.
• Remotely lock/unlock your doors and start your vehicle from virtually anywhere, using the
Uconnect Access App from your device. You can also do so by logging into your owner site,
or by calling Uconnect Access Care when your vehicle has an operable 1X (voice/data) or
3G (data) network connection. Services can only be used where coverage is available; see
coverage map for details.
• Turn your vehicle into a 3G Wi-Fi Hotspot and connect your devices to the internet.
• Receive text or email notifications if your vehicle's security alarm goes off.
• Receive stolen vehicle assistance, using GPS technology to help authorities locate your
vehicle if it is stolen.
• Listen to your text messages or send free-form text messages with your voice while keeping
your hands on the wheel, using the Voice Texting feature requires a device that supports
Bluetooth Message Access Profile (MAP).
• Search for places to eat, shop, relax and play with Yelp, using your voice or on-screen menu.
Then navigate to them (navigation standard on Uconnect 8.4 NAV, optional on Uconnect
8.4).
• Get operator assistance using the ASSIST button on your interior rearview mirror.
Before you drive, familiarize yourself with the easy-to-use Uconnect Access services.
1. The ASSIST and 9-1-1 buttons are located on your rearview mirror. The ASSIST button is used
for contacting Roadside Assistance, Vehicle Care and Uconnect Access Care. The 9-1-1
button connects you to emergency services.
NOTE:
Vehicles sold in Canada and Mexico DO NOT have 9-1-1 call system capabilities. 9-1-1 or other
emergency line operators in Canada and Mexico may not answer or respond to 9-1-1 system calls.
” button is located in the center of the menu bar of the radio
2. The Uconnect “Apps
touchscreen. This is where you can manage your Apps and purchase 3G Wi-Fi on demand.
3. The Uconnect Voice Command and Uconnect Phone buttons are located on the left side of
your steering wheel. These buttons let you use your voice to give commands, make phone
calls, send and receive text messages hands-free, enter navigation destinations, and control
your radio and media devices.
128
ELECTRONICS
Included Trial Period For New Vehicles
Your new vehicle may come with an included trial period for use of the Uconnect Access Services
starting at the date of vehicle purchase (date based on vehicle sales notification from your
dealer). To activate the trial, you must first register with Uconnect Access. After the trial
period, if you wish to continue your Uconnect Access Services you can choose to purchase a
subscription.
Uconnect Access Subscription
• After the trial period, you can subscribe by pushing the ASSIST button on the rear-view mirror
and speaking with a Uconnect Access Care agent or by visiting the owner site Mopar.com. If
you need assistance, U.S. residents can call Uconnect Access Care at 1-855-792-4241 .
• For the latest information on packages and pricing information: U.S. residents visit
DriveUconnect.com.
Uconnect Access Registration (Uconnect 8.4/8.4 NAV, U.S.
48 Contiguous States, Alaska And Hawaii)
To unlock the full potential of Uconnect Access in your vehicle, you first need to register with
Uconnect Access.
1. Push the ASSIST button on your rearview mirror.
2. Press the “Uconnect Care” button on the
touchscreen.
3. A helpful Uconnect Care Agent will register
your vehicle and handle all of the details.
Signing up is easy! Simply follow the steps
above. Or, press the “Apps
” button on the
touchscreen, then select the Uconnect registration app to “Register By Web” and complete
the process using your device or computer.
Why sign up for Uconnect Access? Here are
just a few examples of things you’ll be able to
do:
• Know that help, if you need it, is only a
button press away.
ASSIST Button
• Lock and unlock your vehicle doors from hundreds of miles away.
• Discover great, new places around you using Yelp.
• Dictate and send text messages by speaking out loud (all while keeping both hands on the
wheel!)
For further information please visit DriveUconnect.com.
129
ELECTRONICS
Download The Uconnect Access App
You’re only a few steps away from using remote commands and sending a destination from your
phone to your vehicle.
To use the Uconnect Access Mobile App:
• Once you have registered your Uconnect
Access services, download the Uconnect
Access app to your mobile device. Use your
Owner Account login and password to open
the app.
• Once on the “Remote” screen, you can begin using Remote Door Lock/Unlock, Remote Vehicle Start, and activate your horn
and lights remotely, if equipped.
• Press the “Location” button on the bottom
menu bar of the app to bring up a map to
locate your vehicle or send a location to your
Uconnect Navigation using Vehicle Finder
and Send ‘n Go, if equipped.
Mobile App
• Press the “Settings” side menu in the upper left corner of the app to bring up app settings.
Vehicle Finder
The Vehicle Finder feature of the Uconnect Access Mobile App allows you to find the location
of your vehicle when you have lost it. You can also sound the alarm and flash the lights to make
finding your vehicle even easier.
To find your vehicle:
1. Press the “Location” tab on the Uconnect Access Mobile App bottom bar.
2. Select the “Vehicle” icon to determine the location of your vehicle.
Vehicle Icon
130
ELECTRONICS
3. Select the “Find Route” button that appears, once your vehicle is located.
4. Select your preferred Navigation App to
route a path to your vehicle.
Find Route Button
Send ‘N Go
The Send ‘n Go feature of the Uconnect Access Mobile App allows you to search for a
destination on your mobile device and then send the route to your vehicle’s native navigation
system.
To send a navigation route to your vehicle:
1. Press the “Location” tab on the Uconnect Access Mobile App bottom bar.
2. Either type in the destination you would like to navigate to, or search through one of the
categories provided.
3. Select the destination you want to route to
from the list that appears.
Destination Search Bar
131
ELECTRONICS
4. Press the “Send To Vehicle” button, and then confirm the destination by pressing “Yes,” to
send the navigation route to the Uconnect Navigation in your vehicle.
5. Finally, confirm the route inside your vehicle
by pressing the “Go Now” option on the
pop-up that appears on the touchscreen,
when the vehicle is started.
Send To Vehicle Button
Renewing Subscriptions And Purchasing 3G Wi-Fi Hotspot (Uconnect
8.4/8.4 NAV, U.S. 48 Contiguous States, Alaska And Hawaii)
Subscriptions, and 3G Wi-Fi Hotspot, can be purchased from the Uconnect Store within your
vehicle, and online at your Owner Site. If you need help push the ASSIST button on the rearview
mirror, then select Uconnect Care (or dial 1-855-792-4241 ).
NOTE:
You must set up a Uconnect Access Payment Account online (login to mopar.com, go to Edit
Profile, then Uconnect Payment Account, to set up and manage your Payment Account).
132
ELECTRONICS
Getting Started With Apps
Applications (Apps for short) in your Uconnect Access system are designed to deliver the
features and services that you want. There types of apps that you can use with Uconnect Access
are:
1. Built-In Features — use the 1X (voice/data) or 3G (data) network on your Uconnect 8.4 or
8.4 NAV radio.
Apps Main Menu
Press the “Apps
” button on the touchscreen to open the Apps main menu, in this screen you
will be able to access all of your available Apps. To access an App directly, press the corresponding button on the touchscreen and you will be directed to that App. To view the rest of your Apps,
press the page forward or page back button.
Uconnect Apps
1 — Apps Button
2 — Page Forward Button
App Manager
Press the “App Manager” button to access the following categories:
Favorite Apps — This is the default screen when you first press the “App Manager” button on the
touchscreen, and is a good place to put the apps you use most frequently. To make an App a
“favorite”, press the “star” button on the touchscreen on the right side of the App.
All Apps — All of your available Apps will reside in the “All Apps” folder.
Running Apps — Press this tab to see which apps are currently running.
133
ELECTRONICS
Maintaining Your Uconnect Access Account
Selling Your Vehicle
When you sell your vehicle, we recommend that you remove your Uconnect Access Account
information from the vehicle. You can do this on your Owner’s site website at mopar.com.
Removing your account information cancels your subscription and makes your vehicle factoryready for a new owner/subscriber.
For additional information on Uconnect, visit DriveUconnect.com or call 1-877-855-8400
Built-In Features
WARNING!
ALWAYS drive safely with your hands on the wheel. You have full responsibility and assume all
risks related to the use of the Uconnect features and applications in this vehicle. Only use
Uconnect when it is safe to do so. Failure to do so may result in an accident involving serious
injury or death.
WARNING!
• ALWAYS obey traffic laws and pay attention to the road. Some Uconnect Access services,
including 9-1-1 and Assist, will NOT work without an operable 1X (voice/data) or 3G (data)
network connection.
• Ignoring the rearview mirror light could mean you may not have 9-1-1 Call service if needed.
If the rearview mirror light is illuminated, have an authorized dealer service the 9-1-1 Call
system immediately.
• The Occupant Restraint Controller (ORC) turns on the Air Bag Warning Light on the
instrument panel if a malfunction is detected in any part of the airbag system. If the Air Bag
Warning Light is illuminated, the air bag system may not be working properly and the 9-1-1
system may not send a signal to a 9-1-1 operator if an air bag is deployed. If the Air Bag
Warning Light is illuminated, have an authorized dealer service your vehicle immediately.
• If anyone in the vehicle could be in danger (e.g., fire or smoke is visible, dangerous road
conditions or location), do not wait for voice contact from a 9-1-1 operator. All occupants
should exit the vehicle immediately and move to a safe location.
• The 9-1-1 Call system is embedded into the vehicle’s electrical system. Do not add
aftermarket electrical equipment to the vehicle’s electrical system. This may prevent your
vehicle from sending a signal to initiate an emergency call. To avoid interference that can
cause the 9-1-1 Call system to fail, never add aftermarket equipment (e.g., two-way mobile
radio, CB radio, data recorder, etc.) to your vehicle’s electrical system or modify the
antennas on your vehicle.
• IF YOUR VEHICLE LOSES BATTERY POWER FOR ANY REASON (INCLUDING
DURING OR AFTER AN ACCIDENT), the Uconnect features, apps and services,
among others, will not operate.
134
ELECTRONICS
NOTE:
Your vehicle may be transmitting data as authorized by the subscriber.
1. Assist Call (8.4/8.4 NAV) — The rearview mirror contains an ASSIST push button, and the
touchscreen contains a Uconnect Access App, which will automatically connect the vehicle
occupants to one of these predefined destinations for immediate support:
• Roadside Assistance Call — If you get
a flat tire, or need a tow, you’ll be connected to someone who can help anytime. Additional fees may apply. Additional information in this section.
• Uconnect Access Care — In vehicle
support for Uconnect Access System,
Apps and Features.
• Vehicle Care — Total support for your
FCA US LLC vehicle.
2. Emergency 9-1-1 Call (If Equipped) —
The rearview mirror contains a 9-1-1 button
that, when pushed, may place a call from
9-1-1 Button And ASSIST
your vehicle to a local 9-1-1 operator to request help from local police, fire or ambu- 1 — 9-1-1 Button
lance personnel. If this button is accidentally 2 — ASSIST Button
pressed, you will have ten seconds to stop
the call. To cancel, push the 9-1-1 Call button again or press the “Cancel” button shown on the touchscreen. After ten seconds has
passed, the 9-1-1 call will be placed and only the 9-1-1 operator can cancel it. The LED light on
the rearview mirror will turn green once a connection to a 9-1-1 operator has been made. The
green LED light will turn off once the 9-1-1 call is terminated. Have an authorized dealer
service the vehicle if the rearview mirror light is continuously red. On equipped vehicles, this
feature requires a functioning electrical system and an operable 1X (voice/data) or 3G (data)
network connection to function properly. If a connection is made between a 9-1-1 operator
and your vehicle, you understand and agree that 9-1-1 operators may, like any other 9-1-1
call, record conversations and sounds in and near your vehicle upon connection.
3. Roadside Assistance (If Equipped) — If your vehicle is equipped with this feature and has an
operable 1X (voice/data) or 3G (data) network connection, you may be able to connect with
Roadside Assistance by pushing the "ASSIST" button on the rearview mirror. You will be
presented with Assist Care options. Make a selection by pressing the prompts displayed on
the radio. If Roadside Assistance is provided to your vehicle, you agree to be responsible for
any additional roadside assistance service costs that you may incur. In order to provide
Uconnect Services to you, we may record and monitor your conversations with Roadside
Assistance, Uconnect Care or Vehicle Care, whether such conversations are initiated through
the Uconnect Services in your vehicle, your device or via a landline device, and may share
135
ELECTRONICS
information obtained through such recording and monitoring in accordance with regulatory
requirements. You acknowledge, agree and consent to any recording, monitoring or sharing of
information obtained through any such call recordings.
4. Yelp — Customers have the ability to search for nearby destinations or a Point Of Interest
(POI) either by category or custom search by using keywords (for example, “Italian restaurant”). Searching can be done by either voice or by using the touchscreen keypad. Using the
touchscreen, launch Yelp by selecting the “Apps
” icon, then press “Yelp.” To use voice
recognition, push the VR button on the steering wheel and say “launch Yelp,” then follow the
instructions on the Teleprompter.
5. Theft Alarm Notification — The Theft Alarm Notification feature notifies you via email or
text (SMS) message when the vehicle’s factory-installed security alarm system has been
set-off. There are a number of reasons why your alarm may have been triggered, one of which
could be that your vehicle was stolen. If so, please see the details of the Stolen Vehicle
Assistance service below. When you register, Theft Alarm Notification is automatically set to
send you an email at the email address you provide should the alarm go off. You may also opt
to have a text message sent to your device.
6. Stolen Vehicle Assistance — If your vehicle is stolen, contact local law enforcement immediately to file a stolen vehicle report. Once this report has been filed, Uconnect care can help
locate your vehicle. The Uconnect Care agent will ask for the stolen vehicle report number
issued by local law enforcement. As long as your vehicle has an operable 1X (voice/data) or
3G (data) network connection, the Uconnect Care Agent may be able to locate the stolen
vehicle and work with law enforcement to help recover it. Your vehicle must have an operable
1X (voice/data) or 3G (data) network connection and must be registered with Uconnect
Access with an active subscription that includes the applicable feature.
7. 3G Wi-Fi Hotspot — The 3G Wi-Fi Hotspot is an in-vehicle feature that connects your
device to an operable 1X (voice/data) or 3G (data) network using Uconnect Access and is
ready to go where ever you are. Once your vehicle is registered for Uconnect Access, you can
purchase a 3G Wi-Fi Hotspot subscription at the Uconnect Store. After you've made your
purchase, turn on your signal and connect your passengers devices. It's never been easier to
bring your home or office with you.
WARNING!
NEVER use the 3G Wi-Fi Hotspot when you are driving the vehicle. As the driver, you should
only use the 3G Wi-Fi Hotspot when the vehicle is parked in a safe location. Failure to do so
may result in an accident involving serious injury or death.
NOTE:
Your vehicle must have a working electrical system for any of the in vehicle Uconnect features to
operate.
136
ELECTRONICS
Vehicle Health Report/Alert
Your vehicle will send you a monthly email report, which summarizes the performance of
your vehicle’s key systems so you can stay on top of your vehicle’s maintenance needs. Your
vehicle will also send you Vehicle Health Alerts when it detects issues with its key systems that
need your attention. For further information go to the Mopar Owner Connect website at
moparownerconnect.com.
Uconnect Access Remote Features
If you own a compatible iPhone or Android powered device, the Uconnect Access App allows
you to remotely lock or unlock your doors, start your engine or activate your horn and lights from
virtually anywhere. Your vehicle must be equipped with remote start and your vehicle must have
an operable 1X (voice/data) or 3G (data) network connection. Services can only be used where
coverage is available; see coverage map for details. You can download the App from your
Owner’s site or from the App Store (iPhone) or Google Play Store (Android). Visit
UconnectPhone.com to determine if your device is compatible.
U.S. residents - visit UconnectPhone.com or call 1-877-855-8400.
Remote Start (If Equipped) — This feature provides the ability to start the engine on your
vehicle, without the keys and from virtually any distance. You can send a request to your vehicle
in one of two ways:
1. Using the Uconnect Access App from a compatible device.
2. From your Owner’s site website.
• After 15 minutes, if you have not entered your vehicle with the key, the engine will shut off
automatically.
• You can also send a command to turn-off an engine that has been remote started.
• This remote function requires your vehicle to be equipped with a factory-installed Remote
Start system. To utilize this feature after the Uconnect Access App is downloaded, login
with your user name and password.
To use this feature after the Uconnect Access App is downloaded, login using your user name and
password. You will need your four digit Uconnect Security PIN to confirm the request. Press the
“remote start” icon on your Uconnect Access App to remotely start the vehicle.
You can set-up notifications for your account to receive an email or text (SMS) message every
time a command is sent. Login to Mopar Owner Connect at mopar.com, and click on Edit Profile
to manage Uconnect Notifications.
Remote Door Lock/Unlock — This feature provides the ability to lock or unlock the door on
your vehicle, without the keys and from virtually any distance. You can send a request to your
vehicle in one of three ways:
1. Using the Uconnect Access App from a compatible device.
2. From the your Owner’s site website.
3. By contacting the Uconnect Care on the phone.
137
ELECTRONICS
To use this feature after the Uconnect Access App is downloaded, login using your user name and
password. You will need your four digit Uconnect Security PIN to confirm the request. Press the
“closed lock” icon on your Uconnect Access App to lock the doors, and press the “open lock” icon
to unlock the driver’s door.
You can set-up notifications for your account to receive an email or text (SMS) message every
time a command is sent. Login to Mopar Owner Connect at mopar.com and click on Edit Profile
to manage Uconnect Notifications.
Remote Horn And Lights — It’s easy to locate a vehicle in a dark, crowded, or noisy parking area
by activating the horn and lights. It may also help if you need to draw attention to your vehicle for
any reason. You can send a request to your vehicle in one of three ways:
1. Using the Uconnect Access App from a compatible device.
2. From the your Owner’s site website.
3. By contacting the Uconnect Care on the phone.
To use this feature after the Uconnect Access App is downloaded, login using your user name and
password. You will need your four digit Uconnect Security PIN to confirm the request. You can
set-up notifications for your account to receive an email or text (SMS) message every time a
command is sent. Login to Mopar Owner Connect at mopar.com and click on Edit Profile to
manage Uconnect Notifications.
Voice Texting — Want to dictate a personal message? Register with Uconnect Access to take
advantage of a new, cloudbased Voice Texting service: an enhancement to Voice Text Reply.
Voice Texting allows you to compose a new text or reply to an incoming text message. Before you
attempt to use the Voice Texting feature, check to ensure you have the following:
1. A paired Bluetooth enabled device with the Message Access Profile (MAP). Not all Bluetooth
enabled devices support MAP, including all iPhones (Apple iOS). Visit UconnectPhone.com
for system and device compatibility information.
2. An active Uconnect Access trial or paid subscription.
3. Accept the “Allow MAP” profile request on your device. (Please refer to device manufacturer
instructions for details).
To Send A Text Message:
1. Push the Uconnect Phone Button
on the steering wheel.
2. Wait for the beep.
3. Say “Text.”
4. Uconnect will prompt you “Say the phone number, or full name and phone type of the contact
you want to send a message to.”
5. Wait for the beep and say a contact that is in your phonebook, or a mobile phone number that
you would like to send the message to.
6. Uconnect will prompt you “Please say the message that you would like to send.” (If you do not
hear this prompt, you may not have an active subscription with Uconnect Access).
138
ELECTRONICS
7. Wait for the beep, and then dictate any message up to 140 characters. If you exceed 140
characters, you will hear the following prompt: “Message was too long; your message will be
truncated.”
8. Uconnect will then repeat the message back to you.
9. Uconnect will prompt you: “To add to your message, say “Continue”; To delete the current
message and start over, say “Start Over”; to send the current message, say “Send”; to hear the
message again, say “Repeat.”
10. If you are happy with your message and would like to send it, wait for the beep and say “Send.”
11. Uconnect will then say “Sending your message.”
Sample Commands For Voice Text Reply And Voice Texting
Example Command
“Text John Smith”
“Text 123 456 7890”
“Show messages”
“Listen to/view
(message number four, for example)”
“Reply”
“Forward text/message to “John Smith”
“Forward text/message to “123 456 7890”
Action
Send a message to specific contact
in address book
Send 123 456 7890 a message from your
phonebook
See recent text messages listed by number
on Uconnect screen
Hear messages or read it on Uconnect screen
Send a voice text reply to a current message
Forward current text to specific contact
in address book
Forward current text to specific phone number
139
ELECTRONICS
UCONNECT 5.0
Uconnect 5.0
1 — RADIO Button
2 — MEDIA Button
3 — Uconnect Phone Button
4 — COMPASS Button
5 — Climate Functions Button
6 — MORE Button
WARNING!
ALWAYS drive safely with your hands on the wheel. You have full responsibility and assume all
risks related to the use of the Uconnect features and applications in this vehicle. Only use
Uconnect when it is safe to do so. Failure to do so may result in an accident involving serious
injury or death.
CAUTION!
Do NOT attach any object to the touchscreen, doing so can result in damage to the screen.
140
ELECTRONICS
Clock Setting
To start the clock setting procedure, perform the following:
1. Push the MORE button on the faceplate. Next press the “Settings” button on the touchscreen
and then press the “Clock and Date” button on the touchscreen.
2. Press the “Set Time” button on the touchscreen.
3. Press the “Up” or “Down” arrows to adjust the hours or minutes, then select the “AM” or “PM”
button on the touchscreen. You can also select 12hr or 24hr format by pressing the desired
button on the touchscreen.
4. Once the time is set, press the “Done” button on the touchscreen to exit the time screen.
NOTE:
In the Clock Setting Menu, you can also select “Display Clock”, which turns the clock display in
the status bar on or off.
Equalizer, Balance And Fade
1. Push the MORE button on the faceplate.
2. Press the “Settings” button on the touchscreen.
3. Scroll down and press the “Audio” button on the touchscreen to get to the Audio menu.
4. The Audio Menu shows the following options for you to customize your audio settings.
Equalizer
• Press the “Equalizer” button on the touchscreen to adjust the Bass, Mid and Treble. Use the “+”
or “–” button on the touchscreen to adjust the equalizer to your desired settings. Press the
“Done” button on the touchscreen when finished.
Balance/Fade
• Press the “Balance/Fade” button on the touchscreen to adjust the sound from the speakers.
Use the “arrow” button on the touchscreen to adjust the sound level from the front and rear or
right and left side speakers. Press the Center “C” button on the touchscreen to reset the
balance and fade to the factory setting. Press the “Done” button on the touchscreen when
finished.
Speed Adjustable
• Press the “Speed Adjusted Volume” button on the touchscreen to select between OFF, 1, 2 or
3. This will decrease the radio volume relative to a decrease in vehicle speed. Press the “Done”
button on the touchscreen when finished.
Loudness
• Press the “Loudness” button on the touchscreen to select the Loudness feature. When this
feature is activated it improves sound quality at lower volumes.
141
ELECTRONICS
Radio Operation
Uconnect 5.0 Radio Screen
1 — Radio Station Presets
2 — Show All Presets
3 — Seek Up
4 — Audio Settings
5 — Station Info
6 — Direct Tune
7 — Radio Band
8 — Seek Down
Seek Up/Down Buttons
• Press the up or down button to seek through radio stations in AM, FM or SXM bands.
• Hold either button to bypass stations without stopping.
Store Radio Presets Manually
The radio stores up to 12 presets in each of the radio modes. There are four visible presets at the
top of the radio screen. Pressing the “All” button on the touchscreen on the radio home screen
will display all of the preset stations for that mode.
To store a radio preset manually, follow the steps below:
1. Tune to the desired station.
2. Press and hold the desired preset button on the touchscreen for more than two seconds or
until you hear a confirmation beep.
142
ELECTRONICS
SiriusXM Premier Over 160 Channels
Get every channel available on your satellite radio, and enjoy all you want, all in one place. Hear
commercial-free music plus sports, news, talk and entertainment. Get all the premium programming,
including Howard Stern, every NFL game, Oprah Radio, every MLB and NHL game, every NASCAR
race, Martha Stewart and more. And get 20+ extra channels, including SiriusXM Latino, offering
20 channels of commercial free music, news, talk, comedy, sports and more dedicated to Spanish
language programming.
To access SiriusXM Satellite Radio, push the RADIO button on the faceplate and then the SXM
button on the touchscreen.
SiriusXM services require subscriptions, sold separately after the 12-month trial included with the new
vehicle purchase. If you decide to continue your service at the end of your trial subscription,
the plan you choose will automatically renew and bill at then-current rates until you call
SiriusXM at 1-866-635-2349 for U.S. residents and 1-888-539-7474 for Canadian residents
to cancel. See SiriusXM Customer Agreement for complete terms at www.siriusxm.com for
U.S. residents and www.siriusxm.ca for Canadian residents. All fees and programming subject
to change. Our satellite service is available only to those at least 18 and older in the 48 contiguous
USA and D.C. Our Sirius satellite service is also available in PR (with coverage limitations). Our
Internet radio service is available throughout our satellite service area and in AK and HI.
© 2017 Sirius XM Radio Inc. Sirius, XM and all related marks and logos are trademarks of Sirius
XM Radio Inc.
USB/Audio Jack (AUX) — If Equipped
To select a specific audio source, push the MEDIA button on the faceplate. To allow music to
play from your device through the vehicle’s
speakers, press the “Source” button then select
one of the following modes:
USB/iPod
• USB/iPod Mode is entered by either inserting a USB Jump Drive or iPod cable into the
USB port or by pushing the MEDIA button
on the faceplate located left of the display.
Audio Jack (AUX)
Uconnect Media Hub
• The AUX allows a device, such as an
MP3 player or an iPod, to be plugged into the 1 — USB Port
radio and utilize the vehicle’s audio system, 2 — Audio/AUX Jack
using a 3.5 mm audio cable, to amplify the
source and play through the vehicle speakers.
• The functions of the device are controlled using the device buttons, not the buttons on the radio.
The volume may be controlled using the radio or device.
Bluetooth
• If using a Bluetooth-equipped device, you may also be able to stream music to your vehicle's
sound system.
143
ELECTRONICS
UCONNECT 5.0 VOICE RECOGNITION QUICK
TIPS
Introducing Uconnect
Start using Uconnect Voice Recognition with these helpful quick tips. It provides the key Voice
Commands and tips you need to know to control your Uconnect 5.0 system.
Key Features:
• 5” touchscreen
• Three buttons on either side of the display
Uconnect 5.0
144
ELECTRONICS
Get Started
1. Please visit UconnectPhone.com to check mobile device and feature compatibility and to
find phone pairing instructions.
2. Reduce background noise. Wind and passenger conversations are examples of noise that may
impact recognition.
3. Speak clearly at a normal pace and volume while facing straight ahead. The microphone is
positioned on the rearview mirror and aimed at the driver.
4. Each time you give a Voice Command, you must first press either the VR or Phone button,
wait until after the beep, then say your Voice Command.
5. You can interrupt the help message or system prompts by pressing the VR or Phone button
and saying a Voice Command from current category.
All you need to control your Uconnect system with your voice are the buttons on your steering
wheel.
Uconnect VR/Phone Buttons
1 — Push To Initiate Or To Answer A Phone Call, Send Or Receive A Text
2 — Push To Begin Radio Or Media Functions
3 — Push To End Call
145
ELECTRONICS
Basic Voice Commands
The basic Voice Commands below can be given at any point while using your Uconnect system.
Push the VR button
. After the beep, say:
• Cancel to stop a current voice session
• Help to hear a list of suggested Voice Commands
• Repeat to listen to the system prompts again
Notice the visual cues that inform you of your voice recognition system’s status. Cues appear on
the touchscreen.
Uconnect 5.0 Visual Cues
146
ELECTRONICS
Radio
Use your voice to quickly get to the AM, FM or SiriusXM Satellite Radio stations you would like
to hear. (Subscription or included SiriusXM Satellite Radio trial required.)
Push the VR button
. After the beep, say:
• Tune to ninety-five-point-five FM
• Tune to Satellite Channel Hits 1
TIP: At any time, if you are not sure of what to say or want to learn a Voice Command, push the
VR button
and say “Help.” The system will provide you with a list of commands.
Uconnect 5.0 Radio
147
ELECTRONICS
Media
Uconnect offers connections via USB, Bluetooth or auxiliary ports (If Equipped). Voice operation
is only available for connected USB and iPod devices.
Push the VR button
. After the beep, say one of the following commands and follow the
prompts to switch your media source or choose an artist.
• Change source to Bluetooth
• Change source to iPod
• Change source to USB
• Play artist Beethoven; Play album Greatest Hits; Play song Moonlight Sonata; Play genre
Classical
TIP: Press the Browse button on the touchscreen to see all of the music on your iPod or USB
device. Your Voice Command must match exactly how the artist, album, song and genre
information is displayed.
Uconnect 5.0 Media
148
ELECTRONICS
Phone
Making and answering hands-free phone calls is easy with Uconnect. When the Phonebook
button is illuminated on your touchscreen, your system is ready.
U.S. residents can visit UconnectPhone.com to check device and feature compatibility and to
find device pairing instructions.
Push the Phone button
. After the beep, say one of the following commands…
• Call John Smith
• Dial 123-456-7890 and follow the system prompts
• Redial (call previous outgoing phone number)
• Call back (call previous incoming phone number)
TIP: When providing a Voice Command, push the Phone button
and say “Call,” then
pronounce the name exactly as it appears in your phone book. When a contact has multiple
phone numbers, you can say “Call John Smith work.”
Uconnect 5.0 Phone
149
ELECTRONICS
Voice Text Reply
Uconnect will announce incoming text messages. Push the Phone button
(Must have compatible device paired to Uconnect system.)
and say Listen.
1. Once an incoming text message is read to you, push the Phone button
say: Reply.
. After the beep,
2. Listen to the Uconnect prompts. After the beep, repeat one of the pre-defined messages and
follow the system prompts.
TIP: Your device must have the full implementation of the Message Access Profile (MAP) to
take advantage of this feature. For details about MAP, visit UconnectPhone.com for U.S.
residents. Apple iPhone iOS6 or later supports reading incoming text messages only.
PRE-DEFINED VOICE TEXT REPLY RESPONSES
Yes.
Stuck in Traffic.
See you later.
No.
Start without me.
I’ll be Late.
Okay.
Where are you?
I will be <number> minutes late.
Call me.
Are you there yet?
I’ll call you later.
I need directions.
See you in <number> minutes.
I’m on my way.
Can’t talk right now.
I’m lost.
Thanks.
Additional Information
© 2017 FCA US LLC. All rights reserved. Mopar and Uconnect are registered trademarks and
Mopar Owner Connect is a trademark of FCA US LLC. Android is a trademark of Google Inc.
SiriusXM and all related marks and logos are trademarks of SiriusXM Radio Inc. Yelp, Yelp logo,
Yelp burst and related marks are registered trademarks of Yelp.
Uconnect System Support:
• U.S. residents call 1-877-855-8400 (24 hours a day 7 days a week) or visit DriveUconnect.com
• Canadian residents call 1-800-465-2001 (English) or 1-800-387-9983 (French) or visit
DriveUconnect.ca
Mon. – Fri., 8:00 am – 8:00 pm, ET
Sat., 9:00 am – 5:00 pm, ET
Sun., Closed
Uconnect Access Services Support 1-855-792-4241 Please have your Uconnect Security PIN
ready when you call.
150
ELECTRONICS
UCONNECT 8.4/8.4 NAV
Uconnect 8.4/8.4 NAV At A Glance
Uconnect 8.4 NAV Radio Screen
WARNING!
ALWAYS drive safely with your hands on the wheel. You have full responsibility and assume all
risks related to the use of the Uconnect features and applications in this vehicle. Only use
Uconnect when it is safe to do so. Failure to do so may result in an accident involving serious
injury or death.
CAUTION!
Do NOT attach any object to the touchscreen, doing so can result in damage to the screen.
151
ELECTRONICS
Setting The Time
• Model 8.4 NAV synchronizes time automatically via GPS, so it should not require any
time adjustment. If you do need to set the time manually, follow the instructions below for
Model 8.4.
• For Model 8.4, turn the unit on, then press the time display at the top of the screen. Press “Yes.”
• If the time is not displayed at the top of the screen, press the “Settings” button on the
touchscreen. In the Settings screen, press the “Clock” button on the touchscreen, then check
or uncheck this option.
• Press “+” or “–” next to Set Time Hours and Set Time Minutes to adjust the time.
• If these features are not available, uncheck the Sync Time box.
• Press “X” to save your settings and exit out of the Clock Setting screen.
Background Themes
• Screen background themes are selectable from a pre-loaded list of themes. If you’d like to set
a theme, follow the instructions below.
• Press the “Settings” button on the touchscreen.
• Press the “Display” button on the touchscreen.
• Then press “Set Theme” button on the touchscreen and select a theme.
Audio Settings
• Press of the “Audio” button on the touchscreen to activate the Audio settings screen to adjust
Balance/Fade, Equalizer, and Speed Adjusted Volume.
• You can return to the Radio screen by pressing the “X” located at the top right.
Balance/Fade
• Press the “Balance/Fade” button on the touchscreen to Balance audio between the front
speakers or fade the audio between the rear and front speakers.
• Pressing the “Front,” “Rear,” “Left,” or “Right” buttons on the touchscreen or press and drag
the Speaker Icon to adjust the Balance/Fade.
Equalizer
• Press the “Equalizer” button on the touchscreen to activate the Equalizer screen.
• Press the “+” or “–” buttons on the touchscreen, or press and drag over the level bar for each
of the equalizer bands. The level value, which spans between plus or minus nine, is displayed
at the bottom of each of the Bands.
Speed Adjusted Volume
• Press the “Speed Adjusted Volume” button on the touchscreen to activate the Speed
Adjusted Volume screen. The Speed Adjusted Volume is adjusted by pressing the volume
level indicator. This alters the automatic adjustment of the audio volume with variation to
vehicle speed.
152
ELECTRONICS
Personalized Menu Bar
The Uconnect features and services in the main menu bar are easily changed for your convenience. Simply follow these steps:
Uconnect 8.4/8.4 NAV Main Menu
1. Press the “Apps
” button to open the App screen.
2. Press and hold, then drag the selected App to replace an existing shortcut in the main menu
bar.
The new app shortcut, that was dragged down onto the main menu bar, will now be an active
App/shortcut.
NOTE:
This feature is only available if the vehicle is in PARK.
153
ELECTRONICS
Radio
Uconnect 8.4 NAV Radio
1 — Radio Station Presets
2 — Toggle Between Presets
3 — View Small Navigation Map
4 — HD Radio Notification
5 — Audio Settings
6 — Seek Up
7 — Direct Tune To A Radio Station
8 — Seek Down
9 — Browse And Manage Presets
10 — Radio Bands
WARNING!
ALWAYS drive safely with your hands on the wheel. You have full responsibility and assume all
risks related to the use of the Uconnect features and applications in this vehicle. Only use
Uconnect when it is safe to do so. Failure to do so may result in an accident involving serious
injury or death.
• To access the Radio mode, press the “Radio” button on the touchscreen.
154
ELECTRONICS
Selecting Radio Bands
• Press the desired radio band (AM, FM or SXM) button on the touchscreen.
Seek Up/Seek Down
• Press the Seek up or down arrow buttons on the touchscreen for less than two seconds to seek
through radio stations.
• Press and hold either arrow button on the touchscreen for more than two seconds to bypass
stations without stopping. The radio will stop at the next listenable station once the arrow
button on the touchscreen is released.
Direct Tune
• Tune directly to a radio station by pressing the “Tune” button, and entering the desired station
number.
Store Radio Presets Manually
Your radio can store 36 total preset stations, 12 presets per band (AM, FM and SXM). They are
shown at the top of your radio screen. To see the 12 preset stations per band, press the arrow
button on the touchscreen at the top right of the screen to toggle between the two sets of six
presets.
To store a radio preset manually, follow the steps below:
1. Tune to the desired station.
2. Press and hold the desired numbered button on the touchscreen for more than two seconds
or until you hear a confirmation beep.
HD Radio — If Equipped
• HD Radio (available on Uconnect 8.4 NAV) operates similar to conventional radio except it
allows broadcasters to transmit a high-quality digital signal.
• With an HD radio receiver, the listener is provided with a clear sound that enhances the
listening experience. HD radio can also transmit data such as song title or artist.
SiriusXM All Access
Get every channel available on your satellite radio, and enjoy all you want, all in one place. Hear
commercial-free music plus sports, news, talk and entertainment. Get all the premium programming, including Howard Stern, every NFL game, Oprah Radio, every MLB and NHL game,
every NASCAR race, Martha Stewart and more. Access to over 150 channels with you included
1 year free trial. And get 20+ extra channels, including SiriusXM Latino, offering 20 channels of
commercial free music, news, talk, comedy, sports and more dedicated to Spanish language
programming. You can also access your Sirius XM radio using your computer, or the Sirius XM
smartphone app.
• To access SiriusXM Satellite Radio, press the “SXM” button on the touchscreen on the main
Radio screen.
155
ELECTRONICS
The following describes features that are available when in SiriusXM Satellite Radio mode:
Seek Up/Seek Down
• Press the Seek arrow buttons on the touchscreen for less than two seconds to seek through
channels in SXM mode.
• Press and hold either arrow button on the touchscreen for more than two seconds to bypass
channels without stopping. The radio will stop at the next listenable channel once the arrow
button on the touchscreen is released.
Direct Tune
• Tune directly to a SXM channel by pressing the “Tune” button on the touchscreen on the
screen, and entering the desired station number.
Tune Start
• The Tune Start feature begins playing a song from the beginning when you tune to your
favorite preset SXM channel. Tune Start can be enabled or disabled through the SiriusXM
setup page.
Jump
• Automatically tells you when Traffic & Weather for a favorite city is available, and gives you the
option to switch to that channel. Press “Jump” to activate the feature. After listening to Traffic
and Weather, press “Jump” again to return to the previous channel.
Fav
• Activates the favorites menu. You can add up to 50 favorite artists or songs. Just press “Add
Fav Artist” or “Add Fav Song” while the song is playing. You will then be alerted any time one
of these songs, or works by these artists, is playing on other SiriusXM channels.
Album Art
• When arriving at a station, the Channel Art will be displayed to the left of the station
information. After five seconds the Channel Art will be replaced with the Album Art (if
available).
SiriusXM Parental Controls
• You can skip or hide certain channels from view if you do not want access to them. Press the
“Apps” button on the touchscreen, then the “Settings” button on the touchscreen, next press
the “Sirius Setup” button on the touchscreen, then select Channel Skip. Press the box
check-mark next to the channel you want skipped. They will not show up in normal usage.
• SiriusXM also offers the option to permanently block selected channels. Call (1-888-601-6297
for U.S. customers, 1-877-438-9677 for Canadian customers) and request the Family-Friendly
Package.
156
ELECTRONICS
Browse
Lets you browse the SiriusXM channel listing or Genre listing. Favorites, Game Zone, Weather
and Jump settings also provide a way to browse the SiriusXM channel list.
Browse
Sub-Menu
All
Genre
Presets
Favorites
Game Zone
Jump
Sub-Menu Description
Shows the channel listing.
Provides a list of all genres, and lets you jump to a channel within the selected genre.
Lets you scroll the list of Preset satellite channels. Press the channel, or press Enter
on the Tune knob, to go to that channel. Press the trash can icon to delete a preset.
Your presets are also shown at the top of the main Satellite Radio screen.
Lets you manage artists and songs in the Favorites list and configure Alert Settings
to let you know when favorite songs or artists are playing on other channels. Also,
view a list of channels airing any of your Favorites.
Provides alerts when your favorite sports teams are starting a game which is being
aired on other SiriusXM channels, or when their game score is announced. You can
select and manage your Teams list here, and configure alerts.
Lets you select your favorite cities for Traffic & Weather information, which is used
by the Jump feature on the main satellite radio screen.
Replay
Lets you replay up to 44 minutes of the content of the current SiriusXM channel.
Replay
Option
Play/Pause
Rewind/RW
Fast
Forward/FW
Replay Time
Live
Option Description
Press to Pause content playback. Press Pause/Play again to resume playback.
Rewinds the channel content in steps of five seconds. Press and hold to rewind
continuously, then release to begin playing content at that point.
Forwards the content, and works similarly to Rewind/RW. However, Fast
Forward/FW can only be used when content has been previously rewound.
Displays the amount of time in the upper center of the screen by which your content
lags the Live channel.
Resumes playback of Live content at any time while replaying rewound content.
• SiriusXM services require subscriptions, sold separately after the 12-month trial included with
the new vehicle purchase. If you decide to continue your service at the end of your trial
subscription, the plan you choose will automatically renew and bill at then-current rates
until you call SiriusXM at 1-866-635-2349 for U.S. residents and 1-888-539-7474 for
Canadian residents to cancel. See SiriusXM Customer Agreement for complete terms at
www.siriusxm.com (U.S. residents) or siriusxm.ca (Canadian residents). All fees and
programming subject to change. Our satellite service is available only to those at least 18 and
older in the 48 contiguous USA and D.C. Our Sirius satellite service is also available in PR
(with coverage limitations). Our Internet radio service is available throughout our satellite
service area and in AK and HI. ©2017 Sirius XM Radio Inc. Sirius, XM and all related marks
and logos are trademarks of Sirius XM Radio Inc.
157
ELECTRONICS
Disc Operation (If Equipped)
• Your vehicle may have a remote CD player located in the lower center console storage bin, or
in the lower center bench seat bin.
• CD/Disc Mode is entered by either inserting a CD/Disc or by pressing the MEDIA button.
Once in Media Mode, select “Disc.”
• Gently insert one CD into the CD player with the CD label facing as indicated on the
illustration located on the Disc player.
Seek Up/Down Buttons
• Press to seek through Disc tracks.
• Hold either button to bypass tracks without stopping.
Browse
• Press the “Browse” button on the touchscreen to scroll through and select a desired track on
the Disc. Press the “Exit” button on the touchscreen if you wish to cancel the browse function.
Media Hub — USB/Audio Jack (AUX) — If Equipped
There are many ways to play music from
MP3 players or USB devices through your vehicle's sound system. Press your Media button
on the touchscreen to begin.
Audio Jack (AUX)
• The AUX allows a device to be plugged into
the radio and utilize the vehicle’s sound system,
using a 3.5 mm audio cable, to amplify the
source and play through the vehicle speakers.
• Pressing the “AUX” button on the touchscreen will change the mode to auxiliary
device if the audio jack is connected, allowing the music from your device to be heard
through the vehicle's speakers. To activate
the AUX, plug in the audio jack.
Uconnect Media Hub
1 — USB Port
2 — Audio/AUX Jack
• The functions of the device are controlled
using the device buttons. The volume may be controlled using the radio or device.
USB Port
• Connect your compatible device using a USB cable into the USB Port. USB Memory sticks with
audio files can also be used. Audio from the device can be played on the vehicles sound system
while providing metadata (artist, track title, album, etc.) information on the radio display.
• When connected, the compatible USB device can be controlled using the radio or Steering
Wheel Audio Controls to play, skip to the next or previous track, browse, and list the contents.
• The battery charges when plugged into the USB port (if supported by the specific device).
158
ELECTRONICS
NOTE:
When connecting your device for the first time, the system may take several minutes to read your
music, depending on the number of files. For example, the system will take approximately five
minutes for every 1,000 songs loaded on the device. Also during the reading process, the Shuffle
and Browse functions will be disabled. This process is needed to ensure the full use of your
features and only happens the first time it is connected. After the first time, the reading process
of your device will take considerably less time unless changes are made or new songs are added
to the playlist.
Bluetooth Streaming Audio
• If equipped with Uconnect Voice Command, your Bluetooth-equipped device may also be
able to stream music to your vehicle's sound system. Your connected device must be
Bluetooth-compatible and paired with your system (see Uconnect Phone for pairing instructions). You can access the music from your connected Bluetooth device by pressing the
Bluetooth
button on the touchscreen while in Media mode.
Media Controls
Media Controls
1 — Repeat Music Track
2 — Music Track And Time
3 — Shuffle Music Tracks
4 — Music Track Information
5 — Show Songs Currently In Cue
To Be Played
6 — Browse Music By
7 — Music Source
The controls are accessed by pressing the desired button on the touchscreen and choosing
between AUX, USB or Bluetooth.
159
ELECTRONICS
NOTE:
Uconnect will automatically switch to the appropriate mode when something is first connected or
inserted into the system.
Navigation
• The information in the section below is only applicable if you have the 8.4 NAV system or the
Navigation has been activated on your 8.4 system.
• If you have a Uconnect 8.4 system your radio is “Navigation-Ready,” and can be equipped with
Navigation at an extra cost. Please see your dealer for details.
Press the “Nav” button on the touchscreen in the menu bar to access the Navigation system.
Changing The Navigation Voice Prompt Volume
1. Press the “View Map” button on the touchscreen from the Nav Main Menu.
2. With the map displayed, press the “Settings” button on the touchscreen in the lower right area
of the screen.
3. In the Settings menu, press the “Guidance” button on the touchscreen.
4. In the Guidance menu, adjust the Nav Volume by pressing the “+” or “–” buttons on the
touchscreen.
Uconnect 8.4 NAV Navigation
1 — Find A Destination
2 — View Map
3 — Information
4 — Emergency
160
5 — Navigation Settings
6 — Stop A Route
7 — Detour A Route
8 — Repeat Route Guidance Prompt
ELECTRONICS
Finding Points Of Interest
• From the main Navigation menu, press the “Where To?” button on the touchscreen, then press
the “Points of Interest” button on the touchscreen.
• Select a Category and then a subcategory, if necessary.
• Select your destination and press the “Yes” button on the touchscreen.
Finding A Place By Spelling The Name
• From the Main Navigation Menu press the “Where to?” button on the touchscreen, press the
“Points of Interest” button on the touchscreen, then press the “Spell Name” button on the
touchscreen.
• Enter the name of your destination.
• Press the “List” button on the touchscreen.
• Select your destination and press the “Yes” button on the touchscreen.
One-Step Voice Destination Entry
• Enter a navigation destination without taking your hands off the wheel.
button on the steering wheel, wait for the
• Just push the Uconnect Voice Command
beep and say something like, "Find Address 800 Chrysler Drive Auburn Hills MI."
NOTE:
Destination entry is not available while your vehicle is in motion. However, you can use Voice
Commands to enter an address while moving. Refer to “Uconnect 8.4/8.4 NAV Voice Recognition Quick Tips” in “Electronics” for further information.
Setting Your Home Location
• Press the “Nav” button on the touchscreen in the menu bar to access the Navigation system
and the Main Navigation menu.
• Press the “Where To?” button on the touchscreen, then press the “Go Home” button on the
touchscreen.
• You may enter your address directly, use your current location as your home address, or choose
from recently found locations.
• To delete your Home location (or other saved locations) so you can save a new Home location,
press the “Where To?” button on the touchscreen from the Main Navigation menu, then press
the “Go Home” button on the touchscreen, and in the Yes screen press the “Options” button
on the touchscreen. In the Options menu press the “Clear Home” button on the touchscreen.
Set a new Home location by following the previous instructions.
161
ELECTRONICS
Go Home
• A Home location must be saved in the system. From the Main Navigation menu, press the
“Where To?” button on the touchscreen, then press the “Go Home” button on the
touchscreen.
Uconnect 8.4 NAV Map
1 — Distance To Next Turn
2 — Next Turn Street
3 — Estimated Time Of Arrival
4 — Zoom In And Out
5 — Your Location On The Map
6 — Navigation Main Menu
7 — Current Street Location
8 — Navigation Routing Options
Your route is marked with a blue line on the map. If you depart from the original route, your route
is recalculated. A speed limit icon could appear as you travel on major roadways.
162
ELECTRONICS
Adding A Stop
• To add a stop you must be navigating a route.
• Press the “Menu” button on the touchscreen to return to the Main Navigation menu.
• Press the “Where To?” button on the touchscreen, then search for the extra stop. When
another location has been selected, you can choose to cancel your previous route, add as the
first destination or add as the last destination.
• Press the desired selection and press the “Yes” button on the touchscreen.
Taking A Detour
• To take a detour you must be navigating a route.
• Press the “Detour” button on the touchscreen.
NOTE:
If the route you are currently taking is the only reasonable option, the device may not calculate a
detour. For more information, see your Uconnect Owner’s Manual Supplement.
SiriusXM Traffic (8.4 NAV & US Market Only)
Don't Drive Through Traffic. Drive Around It.
Avoid congestion before you reach it. By enhancing your vehicle's navigation system with the
ability to see detailed traffic information, you can pinpoint traffic incidents, determine average
traffic speed and estimate travel time along your route. Since the service is integrated with a
vehicle's navigation system, SiriusXM Traffic can help drivers pick the fastest route based on
traffic conditions. Five year free trial included.
• Detailed information on traffic speed, accidents, construction, and road closings.
• Traffic information from multiple sources, including police and emergency services, cameras
and road sensors.
• Coast-to-coast delivery of traffic information.
• View conditions for points along your route and beyond. Available in over 130 markets.
SiriusXM Travel Link (8.4 NAV & US Market Only)
In addition to delivering over 160 channels of the best sports, entertainment, talk, and
commercial-free music, SiriusXM offers premium data services that work in conjunction with
compatible navigation systems. SiriusXM Travel Link brings a wealth of useful information into
your vehicle and right to your fingertips. Five year free trial included.
• Fuel Prices — Check local gas and diesel prices in your area and route to the station of your
choice.
• Movie Listings — Check local movie theatres and listings in your area and route to the theater
of your choice.
• Sports Scores — In-game and final scores as well as weekly schedules.
• Weather — Check variety of local and national weather information from radar maps to
current and 5-day forecast.
163
ELECTRONICS
SiriusXM Travel Link feature is completely integrated into your vehicle. A few minutes after you
start your vehicle, Travel Link information arrives and updates in the background. You can access
the information whenever you like, with no waiting.
To access SiriusXM Travel Link, press “Apps” button on the touchscreen, then press the
“SiriusXM Travel Link” button on the touchscreen.
NOTE:
SiriusXM Travel Link requires a subscription, sold separately after the five year trial subscription
included with your vehicle purchase.
SiriusXM Travel Link is only available in the United States.
Fuel Prices
Movie Listings
Sports Scores
Weather
Check local gas and diesel prices in your area and route to the station
of your choice.
Check local movie theatres and listings in your area and route to the theater
of your choice.
In-game and final scores as well as weekly schedules.
Check variety of local and national weather information from radar maps
to current and 5-day forecast.
UCONNECT 8.4/8.4 NAV VOICE RECOGNITION
QUICK TIPS
Introducing Uconnect
Start using Uconnect Voice Recognition with these helpful quick tips. It provides the key Voice
Commands and tips you need to know to control your Uconnect 8.4 or 8.4 NAV system.
If you see the
icon on your touchscreen, you have the Uconnect 8.4 NAV system. If not, you
have a Uconnect 8.4 system.
WARNING!
ALWAYS drive safely with your hands on the wheel. You have full responsibility and assume all
risks related to the use of the Uconnect features and applications in this vehicle. Only use
Uconnect when it is safe to do so. Failure to do so may result in an accident involving serious
injury or death.
164
ELECTRONICS
Get Started
All you need to control your Uconnect system with your voice are the buttons on your steering
wheel.
1. Visit UconnectPhone.com to check mobile device and feature compatibility and to find phone
pairing instructions.
2. Reduce background noise. Wind and passenger conversations are examples of noise that may
impact recognition.
3. Speak clearly at a normal pace and volume while facing straight ahead. The microphone is
positioned on the rearview mirror and aimed at the driver.
4. Each time you give a Voice Command, you must first push either the VR or Phone button,
wait until after the beep, then say your Voice Command.
5. You can interrupt the help message or system prompts by pushing the VR or Phone button
and saying a Voice Command from current category.
Uconnect Voice Command Buttons
1 — Push To Initiate Or To Answer A Phone
Call, Send Or Receive A Text
2 — For All Radios: Push To Begin Radio Or
Media Functions. For 8.4 Only: Push To Begin Navigation, Apps And Climate Functions.
3 — Push To End Call
165
ELECTRONICS
Basic Voice Commands
The basic Voice Commands below can be given at any point while using your Uconnect system.
Push the VR button
. After the beep, say…
• Cancel to stop a current voice session
• Help to hear a list of suggested Voice Commands
• Repeat to listen to the system prompts again
Notice the visual cues that inform you of your voice recognition system’s status. Cues appear on
the touchscreen.
Uconnect 8.4
166
ELECTRONICS
Radio
Use your voice to quickly get to the AM, FM or SiriusXM Satellite Radio stations you would like
to hear. (Subscription or included SiriusXM Satellite Radio trial required.)
Push the VR button
. After the beep, say…
• Tune to ninety-five-point-five FM
• Tune to Satellite Channel Hits 1
TIP: At any time, if you are not sure of what to say or want to learn a Voice Command, push the
VR button
and say “Help.” The system will provide you with a list of commands.
Uconnect 8.4 Radio
167
ELECTRONICS
Media
Uconnect offers connections via USB and Bluetooth. Voice operation is only available for
connected USB and Bluetooth devices. (Remote CD player optional and not available on all
vehicles.)
Push the VR button
. After the beep, say one of the following commands and follow the
prompts to switch your media source or choose an artist.
• Change source to Bluetooth
• Change source to AUX
• Change source to USB
• Play artist Beethoven; Play album Greatest Hits; Play song Moonlight Sonata; Play genre
Classical
TIP: Press the “Browse” button on the touchscreen to see all of the music on your Bluetooth or
USB device (if supported). Your Voice Command must match exactly how the artist, album,
song and genre information is displayed.
Uconnect 8.4 Media
168
ELECTRONICS
Phone
Making and answering hands-free phone calls is easy with Uconnect. When the Phonebook
button is illuminated your system is ready. Visit UconnectPhone.com for mobile phone compatibility and pairing instructions.
Push the Phone button
. After the beep, say one of the following commands…
• Call John Smith
• Dial 123-456-7890 and follow the system prompts
• Redial (call previous outgoing phone number)
• Call back (call previous incoming phone number)
TIP: When providing a Voice Command, push the Phone button
and say “Call,” then
pronounce the name exactly as it appears in your phone book. When a contact has multiple
phone numbers, you can say “Call John Smith work.”
Uconnect 8.4 Phone
169
ELECTRONICS
Voice Text Reply
Uconnect will announce incoming text messages. Push the Phone button
(Must have compatible mobile phone paired to Uconnect system.)
and say Listen.
1. Once an incoming text message is read to you, push the Phone button
the beep, say: “Reply.”
and say . After
2. Listen to the Uconnect prompts. After the beep, repeat one of the pre-defined messages and
follow the system prompts.
PRE-DEFINED VOICE TEXT REPLY RESPONSES
Yes.
Stuck in traffic.
See you later.
No.
Start without me.
I’ll be late.
Okay.
Where are you?
I will be <number> minutes late.
Call me.
Are you there yet?
I’ll call you later.
I need directions.
See you in <number> of minutes.
I’m on my way.
Can’t talk right now.
I’m lost.
Thanks.
TIP: Your mobile phone must have the full implementation of the Message Access Profile
(MAP) to take advantage of this feature. For details about MAP, visit UconnectPhone.com.
Apple iPhone iOS 6 or later supports reading incoming text messages only. To enable this
feature on your Apple iPhone, follow these four simple steps:
1. Select “Settings.”
2. Select “Bluetooth.”
3. Select The (i) For The Paired Vehicle.
4. Turn On “Show Notifications.”
TIP: Voice Text Reply is not compatible with
iPhone, but if your vehicle is equipped with Siri
Eyes Free, you can use your voice to send a text
message.
iPhone Notification Setting
170
ELECTRONICS
Climate
Too hot? Too cold? Adjust vehicle temperatures hands-free and keep everyone comfortable
while you keep moving ahead. (If vehicle is equipped with climate control.)
Push the VR button
. After the beep, say one of the following commands:
• Set driver temperature to 70 degrees
• Set passenger temperature to 70 degrees
TIP: Voice Command for Climate may only be used to adjust the interior temperature of your
vehicle. Voice Command will not work to adjust the heated seats or steering wheel if equipped.
Uconnect 8.4 Climate
171
ELECTRONICS
Navigation
The Uconnect navigation feature helps you save time and become more productive when you
know exactly how to get to where you want to go. (Navigation is optional on the Uconnect
8.4 system. See your dealer to activate navigation at any time.)
1. To enter a destination, push the VR button
. After the beep, say:
• For the 8.4 Uconnect System, say: “Enter state.”
• For the 8.4 NAV Uconnect System, say: “Find address 800 Chrysler Drive Auburn Hills,
Michigan.”
2. Then follow the system prompts.
TIP: To start a POI search, push the VR button
shop.”
. After the beep, say: “Find nearest coffee
Uconnect 8.4 Navigation
172
ELECTRONICS
Voice Texting
1. To send a message, push the Phone button
“Send message to John Smith.”
. After the beep, say the following command:
2. Listen to the prompt. After the beep, dictate the message you would like to send. Wait for
Uconnect to process your message.
3. The Uconnect system will repeat your message and provide a variety of options to add to,
delete, send or hear the message again. After the beep, tell Uconnect what you’d like to do.
For instance, if you’re happy with your message, after the beep, say: “Send.”
You must be registered with Uconnect Access and have a compatible MAP – enabled smartphone to use your voice to send a personalized text message. For details about MAP, visit
UconnectPhone.com.
Apple iPhone iOS6 or later supports reading incoming text messages only. To enable this feature
on your Apple iPhone, follow these four simple steps:
1. Select “Settings.”
2. Select “Bluetooth.”
3. Select The (i) For The Paired Vehicle.
4. Turn On “Show Notifications.”
TIP:
• Voice Texting is not compatible with iPhone,
but if your vehicle is equipped with Siri Eyes
Free, you can use your voice to send a text
message.
• Messages are limited to 140 characters.
• The Messaging button on the touchscreen
must be illuminated to use the feature.
iPhone Notification Setting
173
ELECTRONICS
Yelp
Once registered with Uconnect Access, you can use your voice to search for the most popular
places or things around you. Please refer to the procedure below to launch a Yelp search:
1. Push the VR button
. After the beep, say: Launch YELP.
2. Once the YELP home screen appears on the touchscreen, push the VR button
say: YELP search.
, then
3. Listen to the system prompts and after the beep, tell Uconnect the place or business that you’d
like Uconnect to find.
TIP: Once you perform a search, you can reorganize the results by selecting either the Best
Match, Rating or Distance tab on the top of the touchscreen display.
Yelp
174
ELECTRONICS
SiriusXM Travel Link
Need to find a gas station, view local movie listings, check a sports score or the 5 - day weather
forecast? SiriusXM Travel Link is a suite of services that brings a wealth of information right to
your Uconnect 8.4 NAV system. (Not available for 8.4 system.)
Push the VR button
. After the beep, say one of the following commands:
• Show fuel prices
• Show 5 - day weather forecast
• Show extended weather
TIP: Traffic alerts are not accessible with Voice Command.
SiriusXM Travel Link
175
ELECTRONICS
Siri Eyes Free — If Equipped
Siri lets you use your voice to send text messages, select media, place phone calls and much more.
Siri uses your natural language to understand what you mean and will respond back to confirm
your requests. The system is designed to keep your eyes on the road and your hands on the wheel
by letting Siri help you perform useful tasks.
To enable Siri push and hold, then release the Uconnect Voice Recognition (VR) button on the
steering wheel. After you hear a double beep you can ask Siri to play podcasts and music, get
directions, read text messages and many other useful requests.
Siri Eyes Free Available
176
ELECTRONICS
Getting Started
Ensure Siri is enabled on your iPhone.
Enable Siri
1 — Select Settings On Your iPhone
2 — Select General
3 — Select Siri
4 — Enable Siri
1. Pair your Siri enabled device to the vehicles sound system. Refer to “Uconnect Phone” in
“Electronics” for a detailed pairing procedure.
Pair Your iPhone
177
ELECTRONICS
2. Push and Hold, then release the Uconnect Voice Recognition (VR) button
steering wheel. After you hear the familiar Siri "double beep," say a command.
on the
NOTE:
A push and release of the
button will
start normal embedded VR functions. The
push and hold, then release of the
button will start Siri functions.
3. After the double beep, begin speaking to
Siri.
Examples of Siri commands and questions:
VR/Siri Button
• "Play Rolling Stones"
• "Send text message to John"
• "Read text message from Sarah"
• "Take me to the nearest coffee shop"
NOTE:
• Speak clearly at a normal pace and volume while facing straight ahead to ensure your
command is understood.
• Siri is available on iPhone 4S and later.
Siri Eyes Free
178
ELECTRONICS
Additional Information
© 2017 FCA US LLC. All rights reserved. Mopar and Uconnect are registered trademarks and
Mopar Owner Connect is a trademark of FCA US LLC. Android is a trademark of Google Inc.
SiriusXM and all related marks and logos are trademarks of SiriusXM Radio Inc. Yelp, Yelp logo,
Yelp burst and related marks are registered trademarks of Yelp.
Uconnect System Support:
• U.S. residents call 1-877-855-8400 (24 hours a day 7 days a week) or visit DriveUconnect.com
• Canadian residents call 1-800-465-2001 (English) or 1-800-387-9983 (French) or visit
DriveUconnect.ca
Mon. – Fri., 8:00 am – 8:00 pm, ET
Sat., 9:00 am – 5:00 pm, ET
Sun., Closed
Uconnect Access Services Support 1-855-792-4241 Please have your Uconnect Security PIN
ready when you call.
179
ELECTRONICS
UCONNECT PHONE
Uconnect Phone (Bluetooth Hands Free Calling)
Uconnect 5.0 Phone Menu
1 — Call/Redial/Hold
2 — Mobile Phone Signal Strength
3 — Currently Paired Mobile Phone
4 — Mobile Phone Battery Life
5 — Mute Microphone
6 — Transfer To/From Uconnect System
180
7 — Uconnect Phone Settings Menu
8 — Text Messaging
9 — Direct Dial Pad
10 — Recent Call Log
11 — Browse Phone Book (Contains 9-1-1)
12 — End Call
ELECTRONICS
Uconnect 8.4/8.4 NAV Phone Menu
1 — Favorite Contacts
2 — Mobile Phone Battery Life
3 — Currently Paired Mobile Phone
4 — Mobile Phone Signal Strength
5 — Mute Microphone
6 — Transfer To/From Uconnect System
7 — Conference Call*
8 — Manage Paired Mobile Phones
9 — Text Messaging**
10 — Direct Dial Pad
11 — Recent Call Log
12 — Browse Phone Book Entries
(Contains 9-1-1)
13 — End Call
14 — Call/Redial/Hold
15 — Do Not Disturb
16 — Reply with Text Message
* — Conference call feature only available
on GSM mobile devices
** — Text messaging feature not available
on all mobile phones (requires Bluetooth
MAP profile)
The Uconnect Phone feature enables you to place and receive hands-free mobile phone calls.
Drivers can also place mobile phone calls using their voice or by using the buttons on the
touchscreen (see Voice Command section).
The hands-free calling feature is made possible through Bluetooth technology — the global
standard that enables different electronic devices to connect to each other wirelessly.
If the Uconnect Phone Button
Phone features.
exists on your steering wheel, you then have the Uconnect
Refer to the “Uconnect Voice Recognition Quick Tips” in “Multimedia” in your vehicle's Owner's
Manual on www.chrysler.com/en/owners/manualsfor further details.
181
ELECTRONICS
NOTE:
• The Uconnect Phone requires a mobile phone equipped with the Bluetooth Hands-Free
Profile, Version 1.0 or higher.
• Most mobile phones/devices are compatible with the Uconnect system, however some
mobile phones/devices may not be equipped with all of the required features to utilize all of
the Uconnect system features.
• For Uconnect Customer Care:
• U.S. residents visit UconnectPhone.com or call 1-877-855-8400.
Pairing (Wirelessly Connecting) Your Mobile Phone To The Uconnect
System
Mobile phone pairing is the process of establishing a wireless connection between a cellular
phone and the Uconnect system.
NOTE:
• To use the Uconnect Phone feature, you first must determine if your mobile phone and
software are compatible with the Uconnect system. Please visit UconnectPhone.com for
complete mobile phone compatibility information.
• Mobile phone pairing is not available while the vehicle is in motion.
• A maximum of ten mobile phones can be paired to the Uconnect system.
Start Pairing Procedure On The Radio
Uconnect 5.0:
1. Place the ignition in the ACC or ON position.
2. Press the “Phone” button.
3. Select “Settings.”
4. Select “Paired Phones.”
5. Select “Add device.”
• Uconnect Phone will display an “In progress” screen while the system is connecting.
Uconnect 5.0
182
ELECTRONICS
Uconnect 8.4 & 8.4 NAV:
1. Place the ignition in the ACC or ON position.
2. Press the “Phone” button in the Menu Bar
on the touchscreen.
3. Select “Settings.”
4. Select “Paired Phones.”
5. Select “Add device.”
• Uconnect Phone will display an “In progress” screen while the system is
connecting.
Uconnect 8.4 & 8.4 NAV
Pair Your iPhone:
To search for available devices on your
Bluetooth enabled iPhone:
1. Press the Settings button.
2. Select Bluetooth.
• Ensure the Bluetooth feature is enabled.
Once enabled, the mobile phone will
begin to search for Bluetooth
connections.
3. When your mobile phone finds the
Uconnect system, select “Uconnect”.
Bluetooth On/Uconnect Device
Complete The iPhone Pairing Procedure:
When prompted on the mobile phone, accept
the connection request from Uconnect Phone.
NOTE:
Some mobile phones will require you to enter
the PIN number.
Pairing Request
183
ELECTRONICS
Select The iPhone's Priority Level
When the pairing process has successfully completed, the system will prompt you to choose
whether or not this is your favorite mobile phone. Selecting “Yes” will make this mobile phone the
highest priority. This mobile phone will take precedence over other paired mobile phones within
range and will connect to the Uconnect system automatically when entering the vehicle. Only
one mobile phone and/or one Bluetooth audio device can be connected to the Uconnect system
at a time. If “No” is selected, simply select “Uconnect” from the mobile phone/audio device
Bluetooth screen, and the Uconnect system will reconnect to the Bluetooth device.
Pair Your Android Device:
To search for available devices on your
Bluetooth enabled Android Device:
1. Push the Menu button.
2. Select Settings.
3. Select Connections.
4. Turn Bluetooth setting to “On.”
• Ensure the Bluetooth feature is enabled.
Once enabled, the mobile phone will begin to search for Bluetooth connections.
Uconnect Device
5. Once your mobile phone finds the
Uconnect system, select “Uconnect”.
• You may be prompted by your mobile phone to download the phonebook, check “Do Not
Ask Again” to automatically download the phonebook. This is so you can make calls by
saying the name of your contact.
184
ELECTRONICS
Complete The Android Pairing Procedure:
Select The Android Mobile Phone's Priority
Level
When the pairing process has successfully
completed, the system will prompt you to
choose whether or not this is your favorite mobile phone. Selecting “Yes” will make this mobile phone the highest priority. This mobile
phone will take precedence over other paired
mobile phones within range and will connect to
the Uconnect system automatically when entering the vehicle. Only one mobile phone
and/or one Bluetooth audio device can be connected to the Uconnect system at a time. If
“No” is selected, simply select “Uconnect” from
the mobile phone/audio device Bluetooth
screen, and the Uconnect system will reconnect to the Bluetooth device.
You are now ready to make hands-free calls.
Press the Uconnect “Phone” button
on
your steering wheel to begin.
Pairing Request
Confirm the passkey shown on the mobile
phone matches the passkey shown on the
Uconnect system then accept the Bluetooth
pairing request.
NOTE:
Refer to UconnectPhone.com website for additional information on mobile phone pairing and
for a list of compatible phones.
Common Phone Commands (Examples)
• “Call John Smith”
• “Call John Smith mobile”
• “Dial 1 248 555 1212”
• “Redial”
Mute (Or Unmute) Microphone During Call
During a call, press the “Mute” button on the Phone main screen to mute and unmute the call.
Transfer Ongoing Call Between Handset And Vehicle
During an on-going call, press the “Transfer” button on the Phone main screen to transfer an
on-going call between handset and vehicle.
185
ELECTRONICS
Phonebook
The Uconnect system will automatically sync your phonebook from your paired phone, if this
feature is supported by your phone. Phonebook contacts are updated each time that the phone
is connected. If your phone book entries do not appear, check the settings on your phone. Some
phones require you to enable this feature manually.
• Your phonebook can be browsed on the Uconnect system touchscreen, but editing can only
be done on your phone. To browse, press the “Phone” button on the touchscreen, then the
“Phonebook” button on the touchscreen.
Favorite phonebook entries can be saved as Favorites for quicker access. Favorites are shown at
the top of the main phone screen.
Voice Command Tips
• Speaking complete names (i.e; Call John Doe vs. Call John) will result in greater system
accuracy.
• You can “link” commands together for faster results. Say “Call John Doe, mobile,” for example.
• If you are listening to available voice command options, you do not have to listen to the entire
button on the steering wheel,
list. When you hear the command that you need, push the
wait for the beep and say your command.
Changing The Volume
• Start a dialogue by pushing the Phone button
"Help".
, then say a command for example -
• Use the radio VOLUME/MUTE rotary knob to adjust the volume to a comfortable level while
the Uconnect system is speaking.
NOTE:
The volume setting for Uconnect is different than the audio system.
NOTE:
To access help, push the Uconnect Phone button on the steering wheel and say "help." Push the
or the VR button
and say "cancel" to cancel the help
Uconnect Phone Pickup button
session.
Using Do Not Disturb
With Do Not Disturb, you can disable notifications from incoming calls and texts, allowing you to
keep your eyes on the road and hands on the wheel. For your convenience there is a counter
display to keep track of your missed calls and text messages while you were using Do Not Disturb.
Do Not Disturb can automatically reply with a text message, a call or both, when declining an
incoming call and send it to voicemail.
Automatic reply messages can be:
• “I am driving right now, I will get back to you shortly.”
• Create a custom auto reply message up to 160 characters.
186
ELECTRONICS
While in Do Not Disturb, Conference Call can be selected so you can still place a second call
without being interrupted by incoming calls.
NOTE:
• Only the beginning of your custom message will be seen on the touchscreen.
• Reply with text message is not compatible with iPhones.
• Auto reply with text message is only available on phones that supporting Bluetooth MAP.
Incoming Text Messages
After pairing your Uconnect system with a Bluetooth enabled mobile device with the Message
Access Profile (MAP), the Uconnect system can announce a new incoming text message and
read it to you over the vehicle’s audio system.
NOTE:
Only incoming text messages received during the current ignition cycle can be viewed/read.
To enable incoming text messaging:
iPhone
1. Press the settings button on the mobile phone.
2. Select Bluetooth.
• Ensure Bluetooth is enabled, and the mobile phone is paired to the Uconnect system.
3. Select
located under DEVICES next to Uconnect.
4. Turn “Show Notifications” to On.
Enable iPhone Incoming Text Messages
187
ELECTRONICS
Android Devices
1. Push the Menu button on the mobile phone.
2. Select Settings.
3. Select Connections.
4. Turn “Show Notifications” to On.
• A pop up will appear asking you to accept a request for permission to connect to your
messages. Select “Don’t ask again” and press OK.
NOTE:
All incoming text messages received during the
current ignition cycle will be deleted from the
Uconnect system when the ignition is turned to
the Off position.
Enable Android Device Incoming
Text Messages
Voice Text Reply (Not Compatible With iPhone)
NOTE:
Voice texting reply and voice texting features require a compatible mobile device enabled with
Bluetooth Message Access Profile (MAP). iPhone, and some other smartphones, may not
entirely support Bluetooth MAP. Visit UconnectPhone.com for the latest system and device
compatibility.
• Due to the extremely large number of mobile phone manufacturers, your mobile device may
not be listed. For further assistance, contact Uconnect Customer Care @ 1-877-855-8400 for
U.S. residents or, 1-800-465-2001 (English) / 1-800-387-9983 (French) for Canadian
residents.
Once your Uconnect system is paired with a compatible mobile device, the system can announce
a new incoming text message, and read it to your over the vehicle audio system. You can reply to
the message using Voice Recognition by selecting, or saying, one of the 18 pre-defined messages.
188
ELECTRONICS
Here’s How:
and wait for the beep, then say “reply.” Uconnect will
1. Push the Uconnect Phone button
give the following prompt: “Please say the message you would like to send.”
2. Wait for the beep and say one of the pre-defined messages. (If you are not sure, you can say
“help”). Uconnect will then read the pre-defined messages allowed.
3. As soon as you hear the message you would like to send, you can interrupt the list of prompts
by pushing the Uconnect phone button and saying the phrase. Uconnect will confirm the
message by reading it back to you.
4. Push the Phone button and say “Send.”
PRE-DEFINED VOICE TEXT REPLY RESPONSES
Yes.
Stuck in Traffic.
See you later.
No.
Start without me.
I’ll be Late.
Okay.
Where are you?
I will be <5, 10, 15,...etc.>
minutes late.
Call me.
Are you there yet?
I’ll call you later.
I need directions.
See you in <5, 10, 15,...etc.>
of minutes.
I’m on my way.
Can’t talk right now.
I’m lost.
Thanks.
NOTE:
To make the SMS voice reading function available, the SMS notification option on phone must
be enabled; this option is usually available on the phone, in the Bluetooth connections menu for
a device registered as Uconnect. After enabling this function on the mobile phone, it must be
disconnected and reconnected with the Uconnect system in order to make it effective.
Helpful Tips And Common Questions To Improve Bluetooth
Performance With Your Uconnect System
Mobile Phone won’t reconnect to system after pairing:
• Set mobile phone to auto-connect or trusted device in mobile phone Bluetooth settings
(Blackberry devices).
• Perform a factory reset on your mobile phone. Refer to your mobile phone manufacturer or
cellular provider for instructions.
• Many mobile phones do not automatically reconnect after being restarted (hard reboot). Your
mobile phone can still be connected manually. Close all applications that may be operating
(refer to mobile phone manufacturer’s instructions), and follow “Pairing (Wirelessly Connecting) Your Mobile Phone To The Uconnect System”.
Mobile Phone won’t pair to system:
• Perform a hard reset in the mobile phone by removing the battery (if removable — see your
mobile phone’s owner manual).
• Delete pairing history in mobile phone and Uconnect system; usually found in phone’s
Bluetooth connection settings.
189
ELECTRONICS
• Verify you are selecting “Uconnect” in the discovered Bluetooth devices on your mobile
phone.
• If your vehicle system generates a pin code the default is 0000.
Mobile Phonebook didn’t download:
• Check “Do not ask again,” then accept the “phonebook download” request on your mobile
phone.
• Up to 5,000 contact names with four numbers per contact will transfer to the Uconnect
8.4/8.4 NAV system phonebook.
• Up to 2,000 contact names with six numbers per contact will transfer to the Uconnect 5.0
system phonebook.
Text messaging won’t work:
• Check “Do not ask again,” then accept the “connect to your messages” request on your mobile
phone.
• Verify that your mobile phone has the Bluetooth feature (Message Access Profile).
Can’t make a conference call:
• CDMA (Code-Division Multiple Access) carriers do not support conference calling. Refer to
your mobile phone user’s manual for further information.
Making calls while connected to AUX:
• Plugging in your mobile phone to AUX while connected to Bluetooth will disable Hands-Free
Calling. Do not make calls while your mobile phone is plugged into the AUX jack.
UCONNECT THEATER — IF EQUIPPED
Uconnect Theater Overview
Your Uconnect Theater is designed to give your family years of enjoyment.
There are multiple ways to interact with your Uconnect Theater system.
• Play your favorite CDs, DVDs or Blu-ray Discs
• Plug and play a variety of standard video games or devices into the HDMI port
• Listen to audio over the wireless headphones
• Plug and play a variety of devices into the Video USB port
• Plug in standard headphones to listen to audio
190
ELECTRONICS
Getting Started
There are three different ways to operate the
features of the Uconnect Theater:
• The Remote Control
• The Uconnect Radio
• The Individual Uconnect
Theater Touchscreens
Uconnect Theater Screen
(Rear Touchscreens)
1 — Uconnect Theater Touchscreen
2 — Uconnect Radio (Front Touchscreen)
3 — Uconnect Theater Media Hub (AUX
Output, HDMI Input, USB Charge Only
Port)
Pairing The Remote
If the remote needs to be paired to your Uconnect Theater system, follow the procedure below:
1. Install batteries into both remotes.
2. Press and hold the "Screen,” “Down,” and “Play/Pause" buttons on each remote control
simultaneously until the screen indicator light flashes.
3. Press the Settings icon found in the lower right portion of the Uconnect Theater touchscreen.
4. Press the “Remote” button on the Uconnect Theater touchscreen found in the settings menu.
5. Press the “Manage Remote Controls” button and confirm that there are no remotes already
paired to the system.
6. Push the back arrow button on the Remote to go back to the remote menu.
7. Press the “Pair Remote” option. Press and hold down the “OK” button until pairing process is
fully complete. A touchscreen notification will appear indicating that your remote has been
paired successfully or unsuccessfully.
191
ELECTRONICS
8. Test to see if the remote is paired to the intended screen by checking the screen indicator light
on the remote, and/or running your finger on the gesture pad to see if the cursor responds.
NOTE:
• If remote is ever non-operational, try pairing remote.
• The system can accommodate up to ten paired remote controls.
Unpairing The Remote
In events such as updating the Uconnect Theater software, or taking a remote to another vehicle,
the remote will need to be unpaired from your Uconnect Theater system. To unpair the remote,
follow the procedure below:
1. Select “Manage Remote Controls” from the Remote section of "Settings” and follow the on
screen instructions to complete the unpairing process.
2. Push and hold the “Screen”, “Down Arrow”, and “Play/Pause” buttons for five seconds, or until
the remote screen indicator light flashes.
3. Once complete, the remote will be ready to pair again.
NOTE:
There will be a touchscreen notification message when unpairing is successful. Repeat the above
steps to unpair a second remote.
Uconnect Theater Remote Control
1. Gesture Pad — Control mouse pointer position in this area to move and select items
on the touchscreen, functions similar to a
mouse.
2. Mute Button — Mutes headphone audio.
3. Home Button — Push to access “Sources”.
4. Arrow Buttons — Push the arrow
buttons to highlight an item or scroll
through menus.
Remote Control
5. Fast Forward Button
— Push and
hold to fast forward through the current
audio track or video chapter. Push once to skip to the next track.
6. Play/Pause Button
192
— Begin/resume or pause disc play.
ELECTRONICS
7. Fast Rewind Button
— Push and hold to fast rewind through the current audio track
or video chapter. Push once to revert back to the previous track.
8. OK Button — Push to select the highlighted option in a menu.
9. Screen Selector Button — Push the screen selector to toggle between screen 1 (Driver Side),
or screen 2 (Passenger Side).
10. Back Button — Push to exit out of menus or return to previous screen.
11. Power Button — Turns the screen and wireless headphone transmitter for the selected
Channel on or off.
12. Screen Indicator — Indicates which screen (1 or 2) is being controlled by the remote control
when a button is pushed, or the gesture pad is used.
Replacing The Remote Control Batteries
Each remote control requires two AAA batteries for operation.
NOTE:
Perchlorate Material — special handling may apply.
Visit dtsc.ca.gov/hazardouswaste/perchlorate
To replace the batteries:
1. Locate the battery compartment on the back of the remote, then slide the battery cover
downward.
2. Remove the old batteries and follow battery recycling procedures for your area.
3. Install new batteries, making sure to orient them according to the polarity diagram shown
inside the battery compartment.
4. Replace the battery compartment cover.
Play A DVD/Blu-ray Or USB Media File From Uconnect System
1. Insert a Blu-ray disc or DVD disc into the disc player with the label facing up. Or insert a USB
drive into rear Video USB port.
NOTE:
The DVD/Blu-ray Disc player and Video USB port are both located under the radio controls in
the instrument panel.
2. Press the “Uconnect Theater” button on the radio touchscreen.
3. Select Disc or USB from the source controls (i.e. “Select Input 1” or “Select Input 2”) on the
desired screen (1 or 2).
193
ELECTRONICS
NOTE:
To play a DVD/Blu-ray disc on both screens simultaneously, select disc from both screen drop
downs, or choose disc source on one screen and push “View Screen” button on the other.
4. For DVD/Blu-ray disc – press the “Press to Enter” feature in the Movie Snapshot on radio
touchscreen, then press “OK” on following screen. For USB Media Files - Press Music, Movie,
or Folders, then select media title from list(s).
DVD Blu-ray Disc Player
1 — Disc Player (Rear)
2 — Rear Video USB Port
Source Controls From The Uconnect Radio —
Uconnect Theater
194
ELECTRONICS
NOTE:
After selecting “Press to Enter” or the Movie
Snapshot the control functions for that screen
will appear. These controls only apply to the
individual screen selected.
1. Power
Press to turn “Selected Screen” On/Off.
2. Mute
Mute rear headphones for selected source
for the current ignition cycle. Pressing
mute again will unmute rear headphones.
Media Control Screen
3. Lock
Press to enable/disable Remote Control functions and Rear Touchscreen Controls for the
selected source.
4. View
Select this button to view full screen video if vehicle is not moving. Button is disabled when
not viewing a video source or when the vehicle is in motion.
5. Listen In
Select this button to play one of the rear screens audio over the vehicle’s audio system.
To view a Blu-ray disc on the front Uconnect radio screen, select the Disc source from drop down
menu, and then select the “View” button while in the selected screen controls.
NOTE:
To view video content on the radio screen, bring the vehicle to a stop.
195
ELECTRONICS
Uconnect Theater Apps
Select the Apps source card to play pre-loaded
games. Pressing the “Help” button teaches users how to play each game. Pick from games:
• Back Seat Bingo
• Checkers
• Hanging Fruit
• License Plate Game
• Math Flash Cards
• Solitaire
Apps Home Screen
• Sudoku
• Tic Tac Toe
NOTE:
To exit a game, push “Exit Button” then “Back
Arrow,” or “Home Button” on the touchscreen.
Sudoku App Home Screen
Are We There Yet? — Uconnect 8.4 NAV
When a navigation route has been set from the
Uconnect radio, the second row passengers
can use “Are We There Yet?” for an animated
screen showing distance and time remaining on
navigation routes, as well as the estimated time
of arrival with pop-up notifications. Notifications and their frequency can be set up for
route information by using the arrow buttons,
and can be turned on and off using the “Notifications” button on the “Are We There Yet?”
App. Estimated time of arrival notifications will
pop-up at the bottom of the screen in the
center area on any and all screens.
196
Are We There Yet? App
ELECTRONICS
Using The Rear Video USB Port
Plug in a USB drive, iPhone, iPod or mass storage device and play your favorite music or
movies.
NOTE:
To view USB media on the rear theater screens,
insert a USB drive into the port next to the
DVD/Blu-ray disc player. The USB drive port is
located under the radio controls in the instrument panel.
On the rear screen you can browse the content
of the USB device by going to the USB source.
Use the search feature to find your music faster.
Rear Video USB Port
Search Screen
197
ELECTRONICS
Play Video Games
Connect the video game console to the HDMI 1 or 2 ports, located behind the first row seat.
NOTE:
Certain high-end video games will exceed the
power limit of the vehicle's Power Inverter. Refer to “Power Inverter” in this section for further
information.
Headphones Operation
The headphones receive two separate channels of audio using an infrared transmitter from
the video screens.
If no audio is heard after increasing the volume
control there are a number of things that can be
done to troubleshoot the issue:
• Verify that the screen is turned on.
• Check to see that the channel is not muted.
• Make sure that the headphones are on.
• Verify that the headphone channel selector
button is on the desired channel.
AUX/HDMI/USB
1 — AUX Jack (Headphone Output Only)
2 — HDMI Port
3 — USB Port (Charge Only)
The channel selector button switches between the audio of screen 1 and screen 2. If audio is still
not heard, check that two new AAA type batteries are installed in the headphones.
The headphone power indicator and controls
are located on the right ear cup.
NOTE:
Uconnect Theater must be turned on before
sound can be heard from the headphones. To
conserve battery life, the headphones will automatically turn off approximately three minutes after the Uconnect Theater system is
turned off.
Uconnect Theater Headphones
1 — Power ON/OFF Button
2 — Volume Control Wheel
3 — Channel Selection Button
198
ELECTRONICS
Changing The Audio Mode For Headphones
1. Ensure the remote control and the headphones are on the same channel.
2. Push the Home button on the remote control.
3. When the Home menu appears on the touchscreen, use the arrow buttons on the remote
control to navigate to the available modes and push the OK button to select the new mode or
use the Gesture Pad at the top of the remote control.
Uconnect Theater Headphones
1 — Volume Control Wheel
2 — Channel Selection Button
Replacing The Headphone Batteries
Each set of headphones requires two AAA batteries for operation.
NOTE:
Perchlorate Material — special handling may apply. Visit dtsc.ca.gov/hazardouswaste/
perchlorate
To replace the batteries:
1. Locate the battery compartment on the left ear cup of the headphones, and then slide the
battery cover downward.
2. Remove the old batteries and follow battery recycling procedures for your area.
3. Install new batteries, making sure to orient them according to the polarity diagram shown
inside the battery compartment.
4. Replace the battery compartment cover.
199
ELECTRONICS
Delphi Automotive Stereo Headphone Lifetime Limited Warranty
Who Does This Warranty Cover? This warranty covers the initial user or purchaser ("you" or
"your") of this particular Delphi Automotive ("Delphi") wireless headphone ("Product"). The
warranty is not transferable.
How Long Does the Coverage Last? This warranty lasts as long as you own the Product.
What Does This Warranty Cover? Except as specified below, this warranty covers any Product
that in normal use is defective in workmanship or materials.
What Does This Warranty Not Cover? This warranty does not cover any damage or defect that
results from misuse, abuse or modification of the Product other than by Delphi Automotive. Foam
earpieces, which will wear over time through normal use, are specifically not covered (replacement
foam is available for a nominal charge). DELPHI AUTOMOTIVE IS NOT LIABLE FOR ANY
INJURIES OR DAMAGES TO PERSONS OR PROPERTY RESULTING FROM THE USE OF,
OR ANY FAILURE OR DEFECT IN, THE PRODUCT, NOR IS DELPHI AUTOMOTIVE
LIABLE FOR ANY GENERAL, SPECIAL, DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, EXEMPLARY, PUNITIVE OR OTHER DAMAGES OF ANY KIND OR NATURE
WHATSOEVER. Some states and jurisdictions may not allow the exclusion or limitation of incidental or consequential damages, so the above limitation may not apply to you. This warranty gives you
specific legal rights. You may also have other rights, which vary from jurisdiction to jurisdiction.
What Will Delphi Automotive Do? Delphi Automotive, at its option, will repair or replace any
defective Product. Delphi Automotive reserves the right to replace any discontinued Product
with a comparable model. THIS WARRANTY IS THE SOLE WARRANTY FOR THIS
PRODUCT, SETS FORTH YOUR EXCLUSIVE REMEDY REGARDING DEFECTIVE
PRODUCTS, AND IS IN LIEU OF ALL OTHER WARRANTIES (EXPRESS OR IMPLIED),
INCLUDING ANY WARRANTY FOR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
If you have any questions or comments regarding your Delphi Automotive wireless headphones,
or to register your wireless headphones, please phone:
1-888-293-3332
Disc Menu
When listening to a CD Audio disc, CD Data disc, DVD or Blu-ray, pushing the remote control’s
arrow buttons will navigate the cursor on the rear touchscreen in the desired direction, on
whichever touchscreen is selected. The UP, DOWN, LEFT, and RIGHT arrow buttons, and the
OK and MENU buttons on the remote, along with the corresponding buttons overlaid on the
radio touchscreen, can be used to navigate the disc menu when it appears. This can be used to
select specific chapters in a movie, navigate special features, or to play the movie from the menu.
NOTE:
Inserting a disc into the player will “auto play” the disc if already in the "Disc" source menu on the
rear screens.
200
ELECTRONICS
Display Settings
When watching a video source, pushing “Settings”
icon on the touchscreen activates the
Settings menu. These settings control the appearance of the video on the screen. The factory
default settings are already set for optimum viewing, so there is no need to change these settings
under normal circumstances.
To change the settings, use one of the touchscreens. To reset all values back to the original
settings, select the “Reset to Defaults” then select “YES.”
Wireless Streaming/Mirroring — If Equipped
Your Uconnect Theater System may be equipped with Wireless Streaming/Mirroring functionality that allows you to project your smartphone or tablet onto your rear Uconnect Theater
touchscreens.
Look for the Wireless Streaming/Mirroring Source Card on your rear Uconnect Theater touchscreen, or as a source in the Uconnect Theater menu on the front Uconnect 8.4/8.4 NAV
touchscreen. This Source Card will allow you to wirelessly link your compatible Android devices
to your Uconnect Theater system and stream your device onto the touchscreens.
NOTE:
For system compatibility, consult your device's owner's manual to see if your device supports
mirroring technology compatibility. Apple devices do not support this feature.
To link your device to the rear Uconnect Theater touchscreens:
1. Enable your device’s Wi-Fi
2. Enable the Wireless Streaming/Mirroring feature on your device
NOTE:
Refer to your device's user manual for further information.
3. Select the Pacifica Wireless Network from the list of available networks on your device
4. When prompted by an Authentication Screen, press Accept on the touchscreen to begin
mirroring your device
5. Press the Select Input menu or the Wireless Streaming/Mirroring Source Card to select your
device
NOTE:
The Authentication Screen will appear on both touchscreens. The touchscreen screen on which
“Accept” is selected will be the primary controller for the mirroring session.
NOTE:
• Some devices will allow you to control your device through the Uconnect Theater rear
touchscreens. They will react to your selections from the touchscreen and be represented on
your device as well. When supported, the Uconnect Theater task bar will appear at the top and
bottom of the Uconnect Theater touchscreen, framing your mirrored device.
• Devices that do not support this feature will not respond to touchscreen use once paired and
must be controlled using the device.
201
ELECTRONICS
Settings
Below is a list of the settings available for the Wireless Streaming feature of your Uconnect
Theater system:
• Wireless: ON/OFF – Turn on and off the wireless feature of the Uconnect Theater system.
• Manage Devices – Allows the user to delete the paired devices.
• Local Network Name – Allows the user to rename the Pacifica Wireless Network.
Refer to the Wireless Streaming video on Mopar’s Youtube Channel for tips and additional
information on the Wireless Streaming function.
STEERING WHEEL AUDIO CONTROLS
The remote sound system controls are located on the rear surface of the steering wheel at the
three and nine o’clock positions.
The right-hand control is a rocker-type switch
with a push-button in the center and controls
the volume and mode of the sound system.
Pushing the top of the rocker switch will increase the volume, and pushing the bottom of
the rocker switch will decrease the volume.
Pushing the center button will make the radio
switch between the various modes available
(AM/FM/SXM/AUX, etc.).
The left-hand control is a rocker-type switch
with a push-button in the center. The function
of the left-hand control is different depending
on which mode the radio is in.
Steering Wheel Audio Controls
(Back View Of Steering Wheel)
Radio Operation
Pushing the top of the switch will “Seek” up for the next listenable station and pushing the bottom
of the switch will “Seek” down for the next listenable station.
The button located in the center of the left-hand control will tune to the next preset station that
you have programmed in the radio preset button.
202
ELECTRONICS
AUX/USB/MP3 CONTROL
There are numerous USB ports located throughout the vehicle. This feature allows an external
USB device to be plugged into the USB port.
For further information, refer to the Uconnect Owner’s Manual Supplement.
The data USB ports are located on the instrument panel below the climate controls.
There are multiple USB “charge only” ports in
this vehicle.
• In the center console
• On the back of the front row seats in the
Uconnect Theater Media hubs
• Above the rear cup holders in the third row
of seats
NOTE:
The USB “Charge Only” ports will recharge
battery operated USB devices when connected.
Front Center Stack AUX Jack
And USB Ports
1 — USB Port
2 — Aux Jack
Center Console USB Charging Port
203
ELECTRONICS
INSTRUMENT CLUSTER DISPLAY
Instrument Cluster Display And Controls
The vehicle’s instrument cluster is equipped with an instrument cluster display, which offers useful
information to the driver. With the ignition in the STOP/OFF position, opening/closing of a door
will activate the instrument cluster display for viewing, and display the total miles or kilometers in
the odometer.
The instrument cluster display features a driver-interactive display that is located in the center of
the instrument cluster.
The instrument cluster display main menu items may consist of the following:
• Speedometer
• Vehicle Info
• Driver Assist
• Fuel Economy
• Trip (Trip A/Trip B)
• Audio
• Navigation
• Messages
• Screen Setup
• Speed Warning
The system allows the driver to select information by pushing the following buttons mounted on
the steering wheel:
• Push the up arrow button to scroll upward
through the main menu items.
• Push the down arrow button to scroll downward through the main menu items.
• Push the right arrow button to access the
information screens or submenu screens of
a main menu item.
• Push the left arrow button to access the
information screens or submenu screens of
a main menu item.
• Push the OK button to access/select the
information screens or submenu screens of
a main menu item. Push and hold the OK
button for two seconds to reset displayed/
selected features that can be reset.
Instrument Cluster Display Control Buttons
Compass Calibration
This compass is self-calibrating, which eliminates the need to set the compass manually. When
the vehicle is new, the compass may appear erratic, and the instrument cluster display will read
“CAL” until the compass is calibrated.
204
ELECTRONICS
PROGRAMMABLE FEATURES
Instrument Cluster Display Programmable Features Screen Setup
Push the up or down arrow button to scroll through the Menu Items until the Screen Setup
displays in the instrument cluster display. Push the OK button to enter Screen Setup. The Screen
Setup feature allows you to change what information is displayed in the instrument cluster display
as well as the location that information is displayed.
Configurable Screen Setup Menu Titles
• Compass
• Outside Temp
• Time
• Range to Empty
• Average MPG
• Current MPG
• Odometer
• Trip A Distance
• Trip B Distance
• Audio Info
• Menu Title
• Speedometer (Digital Speed) select
between MPH/km
• Defaults (Restore/Cancel)
The different sections of the instrument cluster display can each be programmed separately to
display some of the options above. For further information, refer to “Instrument Cluster Display”
in “Getting To Know Your Instrument Panel” in the Owner’s Manual at
www.chrysler.com/en/owners/manuals/.
Uconnect Customer Programmable Features
The Uconnect system allows you to access Customer Programmable feature settings such as
KeySense, Display, Units, Voice, Clock, Safety & Driving Assistance, Lights, Doors & Locks,
Auto-On Comfort, Engine Off Options, Audio, Phone/Bluetooth, SiriusXM Setup, Restore
Settings, Clear Personal Data, System Information, and Compass Settings (5.0 Radio Only)
through buttons on the touchscreen.
Uconnect 5.0
Push the MORE
button on the faceplate, then press the “Settings
” button on the
touchscreen to display the settings menu screen. When making a selection, scroll up or down until
the preferred setting is highlighted, then press and release the preferred setting until a checkmark appears next to the setting, showing that setting has been selected.
205
ELECTRONICS
Uconnect 8.4
Press the “Apps
” button, then press the “Settings
” button on the touchscreen to display
the menu setting screen. When making a selection, press the button on the touchscreen to enter
the desired mode. Once in the desired mode, press and release the preferred setting “option”
until a check-mark appears next to the setting, showing that setting has been selected. Once the
setting is complete, either press the Back Arrow button on the touchscreen to return to the
previous menu, or press the “X” button on the touchscreen to close out of the settings screen.
The following feature settings are available:
• KeySense
• Display
• Units
• Voice
• Clock
• Safety & Driving Assistance
• Lights
• Doors & Locks
• Auto-On Comfort
• Engine Off Options
• Audio
• Phone/Bluetooth
• SiriusXM Setup
• Restore Settings
• Clear Personal Data
• System Information
• Compass (5.0 Radio Only)
Refer to “Uconnect Settings” found within “Multimedia” located in your Owner's Manual on
www.chrysler.com/en/owners/manuals for further information.
GARAGE DOOR OPENER — IF EQUIPPED
HomeLink replaces up to three hand-held transmitters that operate devices such as garage door
openers, motorized gates, lighting or home security systems. The HomeLink unit is powered by
your vehicles 12 Volt battery.
The HomeLink buttons, located on the driver’s sunvisor, designate the three different HomeLink
channels. The HomeLink indicator is located above the center button.
NOTE:
HomeLink is disabled when the Vehicle Security Alarm is active.
HomeLink Buttons
206
ELECTRONICS
Before You Begin Programming HomeLink
Be sure that your vehicle is parked outside of the garage before you begin programming.
For more efficient programming and accurate transmission of the radio-frequency signal it is
recommended that a new battery be placed in the hand-held transmitter of the device that is
being programmed to the HomeLink system.
To erase the channels, place the ignition in the ON/RUN position, and push and hold the two
outside HomeLink buttons (I and III) for up to 20 seconds or until the orange indicator flashes.
NOTE:
• Erasing all channels should only be performed when programming HomeLink for the first
time. Do not erase channels when programming additional buttons.
• If you have any problems, or require assistance, please call toll-free 1-800-355-3515 or, on the
Internet at HomeLink.com for information or assistance.
Programming A Rolling Code
For programming garage door openers that were manufactured after 1995. These garage door
openers can be identified by the “LEARN” or “TRAIN” button located where the hanging
antenna is attached to the garage door opener.
NOTE:
It is NOT the button that is normally used to open and close the door. The name and color of the
button may vary by manufacturer.
1. Place the ignition in the ON/RUN position.
2. Place the hand-held transmitter 1 to 3 inches (3 to 8 cm) away from the HomeLink button you
wish to program while keeping the HomeLink indicator light in view.
3. Push and hold the HomeLink button you want to program while you push and hold the
hand-held transmitter button.
4. Continue to hold both buttons and observe the indicator light. The HomeLink indicator will
flash slowly and then rapidly after HomeLink has received the frequency signal from the
hand-held transmitter. Release both buttons after the indicator light changes from slow to
rapid.
5. At the garage door opener motor (in the garage), locate the “LEARN” or “TRAINING”
button. This can usually be found where the hanging antenna wire is attached to the garage
door opener/device motor. Firmly push and release the “LEARN” or “TRAINING” button.
On some garage door openers/devices there may be a light that blinks when the garage door
opener/device is in the LEARN/TRAIN mode.
NOTE:
You have 30 seconds in which to initiate the next step after the LEARN button has been pushed.
6. Return to the vehicle and push the programmed HomeLink button twice (holding the button
for two seconds each time). If the garage door opener/device activates, programming is
complete.
207
ELECTRONICS
NOTE:
If the garage door opener/device does not activate, push the button a third time (for two
seconds) to complete the training.
To program the remaining two HomeLink buttons, repeat each step for each remaining
button. DO NOT erase the channels.
Reprogramming A Single HomeLink Button (Rolling Code)
To reprogram a channel that has been previously trained, follow these steps:
1. Cycle the ignition to the ON/RUN position.
2. Push and hold the desired HomeLink button until the indicator light begins to flash after
20 seconds. Do not release the button.
3. Without releasing the button proceed with “Programming A Rolling Code” step 2 and follow
all remaining steps."
Programming A Non-Rolling Code
For programming Garage Door Openers manufactured before 1995.
1. Cycle the ignition to the ON/RUN position.
2. Place the hand-held transmitter 1 to 3 inches (3 to 8 cm) away from the HomeLink button you
wish to program while keeping the HomeLink indicator light in view.
3. Push and hold the HomeLink button you want to program while you push and hold the
hand-held transmitter button.
4. Continue to hold both buttons and observe the indicator light. The HomeLink indicator will
flash slowly and then rapidly after HomeLink has received the frequency signal from the
hand-held transmitter. Release both buttons after the indicator light changes from slow to
rapid.
5. Push and hold the programmed HomeLink button and observe the indicator light.
• If the indicator light stays on constantly, programming is complete and the garage
door/device should activate when the HomeLink button is pushed.
• To program the two remaining HomeLink buttons, repeat each step for each remaining
button. DO NOT erase the channels.
Reprogramming A Single HomeLink Button (Non-Rolling Code)
To reprogram a channel that has been previously trained, follow these steps:
1. Cycle the ignition to the ON/RUN position.
2. Push and hold the desired HomeLink button until the indicator light begins to flash after 20
seconds. Do not release the button.
3. Without releasing the button proceed with “Programming A Non-Rolling Code” step 2 and
follow all remaining steps.
208
ELECTRONICS
Using HomeLink
To operate, push and release the programmed HomeLink button. Activation will now occur for
the programmed device (i.e. garage door opener, gate operator, security system, entry door lock,
home/office lighting, etc.). The hand-held transmitter of the device may also be used at any time.
POWER INVERTER — IF EQUIPPED
There is a 115 Volt, 150 Watt Power Inverter outlet located on the right side of the vehicle, before
the third row of seats to convert DC current to AC current. The Power Inverter can power cellular
phones, electronics and other low power devices requiring up to 150 Watts. Certain high-end
video game consoles will exceed this power limit, as will most power tools.
The Power Inverter will automatically turn on
and off when the device is plugged in or removed.
The Power Inverter is designed with built-in
overload protection. If the power rating of
150 Watts is exceeded, the Power Inverter will
automatically shut down. Once the electrical
device has been removed from the Power Inverter it will automatically reset. To avoid overloading the circuit, check the power ratings on
electrical devices prior to using the Power
Inverter.
Power Inverter
WARNING!
To avoid serious injury or death:
• Do not insert any objects into the receptacles.
• Do not touch with wet hands.
• Close the lid when not in use.
• If this outlet is mishandled, it may cause an electric shock and failure.
POWER OUTLETS
Your vehicle is equipped with 12 Volt (15 Amp) power outlets, and 5 Volt (2.5 Amp) USB power
outlets, that can be used to power cellular phones, small electronics and other low powered
electrical accessories. The power outlets can be labeled with either a “key” or a “battery” symbol
to indicate how the outlet is powered. Power outlets labeled with a “key” are powered when the
ignition is in the ON or ACC position, while the outlets labeled with a “battery” are connected
directly to the battery and powered at all times.
209
ELECTRONICS
NOTE:
• All accessories connected to the “battery” powered outlets should be removed or turned off
when the vehicle is not in use to protect the battery against discharge.
• To ensure proper cigar lighter operation, a Mopar knob and element must be used.
CAUTION!
Power outlets are designed for accessory plugs only. Do not insert any other object in the
power outlets as this will damage the outlet and blow the fuse. Improper use of the power
outlet can cause damage not covered by your New Vehicle Limited Warranty.
The front power outlet is located at the bottom of the instrument panel.
12 Volt Front Power Outlet
Front USB Charge Only Port
210
ELECTRONICS
In addition to the front power outlets, there is also a power outlet located in the rear cargo area.
The rear power outlet is located in the right rear cargo area.
NOTE:
The USB outlet in the bottom of the instrument panel can be switched from “ignition”
only to constant “battery” powered all the time.
See your local authorized dealer for details.
Rear Power Outlet
WARNING!
To avoid serious injury or death:
• Only devices designed for use in this type of outlet should be inserted into any 12 Volt
outlet.
• Do not touch with wet hands.
• Close the lid when not in use and while driving the vehicle.
• If this outlet is mishandled, it may cause an electric shock and failure.
CAUTION!
• Many accessories that can be plugged in draw power from the vehicle's battery, even when
not in use (i.e., cellular phones, etc.). Eventually, if plugged in long enough, the vehicle's
battery will discharge sufficiently to degrade battery life and/or prevent the engine from
starting.
• Accessories that draw higher power (i.e., coolers, vacuum cleaners, lights, etc.) will degrade
the battery even more quickly. Only use these intermittently and with greater caution.
• After the use of high power draw accessories, or long periods of the vehicle not being
started (with accessories still plugged in), the vehicle must be driven a sufficient length of
time to allow the generator to recharge the vehicle's battery.
211
UTILITY
STOW ‘N VAC INTEGRATED VACUUM —
IF EQUIPPED
Your vehicle may be equipped with an integrated vacuum system. This vacuum is for in-vehicle
use only and should only be used on dry materials and on in-vehicle surfaces. It is located in the
rear trim panel behind the sliding door on the driver’s side of the vehicle.
IMPORTANT SAFETY INSTRUCTIONS
Read all instructions before using. When using your vacuum, basic precautions should be
followed, including the following:
WARNING!
• Never leave children alone in a vehicle, or with access to an unlocked vehicle. Allowing
children to be in a vehicle unattended is dangerous for a number of reasons. A child or
others could be seriously or fatally injured. Children should be warned not to touch the
parking brake, brake pedal or the gear selector.
• Do not leave the key fob in or near the vehicle, or in a location accessible to children, and do
not leave the ignition of a vehicle equipped with Keyless Enter-N-Go in either ACC mode
or engine running (ON) unless you are using the vacuum system. Be aware a child could
operate power windows, other controls, or move the vehicle when the vacuum system is in
use. ALWAYS push ignition button to place ignition in the OFF mode when finished using
the vacuum system.
212
UTILITY
WARNING!
To reduce the risk of fire, serious injury or death:
• Do not use vacuum while vehicle is in motion or while driving.
• Do not vacuum wet surfaces or any liquids.
• Do not use to vacuum up anything outside of the vehicle.
• Do not vacuum any flammable liquids, such as gasoline, or use around explosive vapors.
Vapors from flammable liquids may form an explosive mixture with air and can be ignited by
heat, sparks, or flames. Vapors may travel to a source of ignition and explode.
• Do not vacuum anything that is burning or smoking, such as cigarettes,
matches, or hot ashes/embers.
•
•
•
•
•
•
•
•
Do not allow to be used as a toy. Close attention is necessary when used by or near children.
Do not leave the vacuum running while unattended.
Use only as described in this manual. Use only attachments provided with your vehicle.
Do not put any object into openings. Do not use with any opening blocked; keep free of
dust, lint, hair, and anything that may reduce air flow.
Do not vacuum toxic material such as chlorine bleach, ammonia, drain cleaner, etc.
Do not vacuum hard or sharp objects such as glass, nails, screws, coins, etc.
Keep hair, loose clothing, fingers, and all parts of body away from openings and moving
parts.
Only use with filter in place. Periodically check that the filter is in place and in good
condition.
WARNING!
This equipment incorporates parts such as switches, motors, or the like that tend to produce
arcs or sparks that can cause an explosion. When using your vacuum near gasoline-dispensing
equipment or service stations, park vehicle at least 20 ft (6 m) away from the exterior enclosure
of any dispensing pump. The vacuum is mounted more than 18 inches (45 cm) above ground
level in your vehicle.
1. Before Using Vacuum:
Accessory (ACC) Mode Operation - For up to 10 minutes of operation
Always apply the parking brake, shift the transmission into PARK, and push ignition button to
place ignition in Accessory (ACC) mode. The engine will not be running in this mode. Do
not leave the key fob in or near the vehicle, or in a location accessible to children.
213
UTILITY
NOTE:
The vacuum system will run for 10 minutes off battery power and then the vacuum will shut down.
A low battery indication light (LOW PWR) located below the vacuum nozzle storage location will
come on one minute before the vacuum shuts down.
Engine Running (ON) Operation - For more than 10 minutes of operation
• Position vehicle outdoors and fully open all side windows.
• Always apply the parking brake, shift the transmission into PARK, and leave engine
running.
WARNING!
Carbon monoxide (CO) in exhaust gases can cause serious injury or death. Follow the
precautions below to prevent carbon monoxide poisoning:
• Do not inhale exhaust gases.
• Do not start or run an engine in a closed garage or confined area. Always position vehicle
outdoors and fully open all side windows before using vacuum system with the engine
running.
• Guard against carbon monoxide with proper maintenance. Have the exhaust system
inspected every time the vehicle is raised. Have any abnormal conditions repaired promptly.
2. Unclip the vacuum nozzle and pull to extend vacuum hose from the storage location.
NOTE:
The hose can reach every corner of the vehicle floor.
3. Install desired attachment if needed.
NOTE:
To access crevice or upholstery attachments,
open the front Attachment Compartment.
• Crevice Tool — Able to reach into tight
spaces including the seat latches located
in the floor.
• Upholstery Tool — Use to agitate dirt and
debris from carpets and seats. This tool
can also be used to pick up pet hair.
• Hose Extension — Use to add another
12 ft of usable length to the vacuum hose.
Hose extension is located in the upper
access panel behind the third row seat on
the driver’s side.
Front Storage Compartments
1 — Vacuum Nozzle Storage Location
2 — Attachment Compartment
214
UTILITY
4. Push vacuum On/Off button
vacuum as needed.
located under the vacuum nozzle storage location. Use
NOTE:
• When the vacuum is ON, the LED indicator on the on/off button will illuminate.
• When the vacuum is OFF, the LED indicator will also be off.
• After nine minutes of operation in ACC mode (engine not running), the Low Power
Indicator Light (LOW PWR) will illuminate.
Power Buttons
1 — Low Power Indicator Light
2 — On/Off Button
215
UTILITY
WARNING!
For in vehicle use ONLY. To reduce the risk of fire, serious injury or death:
• Do not use vacuum while vehicle is in motion or while driving.
• Do not vacuum wet surfaces or any liquids.
• Do not use to vacuum up anything outside of the vehicle.
• Do not vacuum any flammable liquids, such as gasoline, or use around explosive vapors.
Vapors from flammable liquids may form an explosive mixture with air and can be ignited by
heat, sparks, or flames. Vapors may travel to a source of ignition and explode.
• Do not vacuum anything that is burning or smoking, such as cigarettes,
matches, or hot ashes/embers.
• Do not allow to be used as a toy. Close attention is necessary when used by or near children.
• Do not leave the vacuum running while unattended.
• Use only as described in this manual. Use only attachments provided with your vehicle.
• Do not put any object into openings. Do not use with any opening blocked; keep free of
dust, lint, hair, and anything that may reduce air flow.
• Do not vacuum toxic material such as chlorine bleach, ammonia, drain cleaner, etc.
• Do not vacuum hard or sharp objects such as glass, nails, screws, coins, etc.
• Keep hair, loose clothing, fingers, and all parts of body away from openings and moving
parts.
• Only use with filter in place. Periodically check that the filter is in place and in good
condition.
WARNING!
This equipment incorporates parts such as switches, motors, or the like that tend to produce
arcs or sparks that can cause an explosion. When using your vacuum near gasoline-dispensing
equipment or service stations, park vehicle at least 20 ft (6 m) away from the exterior enclosure
of any dispensing pump. The vacuum is mounted more than 18 inches (45 cm) above ground
level in your vehicle.
5. When finished, push power button to turn vacuum off and store vacuum hose and any
attachments.
6. Before exiting the vehicle:
• If vehicle is in ACC mode, push ignition button to place ignition in the OFF mode, remove
key fob from the vehicle, and lock the vehicle.
• If the engine is running, raise all of the windows, push ignition button to place ignition in the
OFF mode, remove key fob from the vehicle, close all of the doors and the liftgate and
lock the vehicle.
216
UTILITY
Vacuum Troubleshooting
• DO NOT use with any opening blocked. If an object becomes lodged in the hose, attempt to
fully extend the hose in a straight line while the vacuum motor is running. If this does not
dislodge the object, turn the vacuum OFF and remove the hose from the vehicle following the
removal instructions below. If the filter is clogged, follow the emptying debris bin procedure
and lightly tap the filter on the collection bin to remove any collected debris from the filter.
Both the bin and the filter can be rinsed with water if needed. To avoid mold and stale odors,
allow both to dry completely before reinstalling in your vehicle. If filter has tears, holes or other
damage and needs to be replaced, please contact your authorized dealer.
• If there are any other issues with your vacuum, contact your authorized dealer. Your vacuum
has no user serviceable parts.
Debris Bin
The debris bin is located behind the lower access panel behind the third row seat on the driver’s
side.
To Empty
1. Push power button to turn vacuum OFF.
2. Open the lower access panel by pulling the finger grip towards you and then pull downward.
Vacuum System Access Panels
1 — Upper Access Panel
2 — Lower Access Panel
217
UTILITY
3. Twist the release knob counterclockwise and pull the bin towards you.
4. Remove the filter and dump the debris in a
trash can. Lightly tap the filter on the collection bin to remove loose debris from the
filter. If the filter is clogged from extended
use, have the filter replaced by your authorized dealer.
5. Reverse the procedure to reinstall.
NOTE:
The debris bin must be fully installed and
locked for the vacuum to function properly.
Hose Access Port
The hose access port is located behind the
upper access panel behind the third row seat on
the driver’s side.
Debris Bin Release Knob
To Remove Vacuum Hose For Cleaning
1. Unclip the hose from the hose access port located in the rear of the vehicle by pushing the
yellow vacuum hose release lever with right thumb and lifting the hose with index finger.
2. Return to vacuum nozzle storage location
located behind the sliding door.
3. Grab the vacuum nozzle and gently pull the
hose out through vacuum nozzle storage
location.
4. Shake the hose to remove any objects stuck
in the hose. Take care not to perforate the
hose while attempting to dislodge any objects.
5. Reverse the procedure to reinstall and clip
the hose into place.
Vacuum Hose Release Lever
218
UTILITY
TRAILER TOWING WEIGHTS (MAXIMUM
TRAILER WEIGHT RATINGS)
The following chart provides the maximum trailer weight ratings towable for your given drivetrain.
GCWR
(Gross
Max. GTW
Combined
Frontal Area (Gross Trailer
Weight
Weight)
Rating)
8,600 lbs
40 sq ft
3,600 lbs
Yes
(3,900 kg)
(3.72 sq m)
(1,632 kg)
6,500 lbs
40 sq ft
1500 lbs
No
(2,948 kg)
(3.72 sq m)
(680 kg)
Refer to local laws for maximum trailer towing speeds.
Engine/
Trailer Tow
Transmission Package
3.6L/
Automatic
Max. Tongue
Weight
360 lbs
(163 kg)
149 lbs (67 kg)
NOTE:
The trailer tongue weight must be considered as part of the combined weight of occupants and
cargo, and should never exceed the weight referenced on the Tire and Loading Information
placard. Refer to “Tires” in “Servicing And Maintenance” in the Owner’s Manual on
www.chrysler.com/en/owners/manuals for further information.
RECREATIONAL TOWING (BEHIND
MOTORHOME, ETC.)
Towing This Vehicle Behind Another Vehicle
Towing Condition
Flat Tow
Dolly Tow
On Trailer
Wheel OFF the Ground
NONE
Front
Rear
ALL
All Models
NOT ALLOWED
OK
NOT ALLOWED
OK
NOTE:
• To avoid inadvertent Electric Park Brake engagement, you must ensure that the Auto Park
Brake feature is disabled before towing this vehicle. The Auto Park Brake feature is enabled or
disabled via the customer programmable features in the Uconnect Settings.
• When towing your vehicle, always follow applicable state and provincial laws. Contact state
and provincial Highway Safety offices for additional details.
• If your vehicle is disabled and in need of commercial towing service, please refer to “Towing A
Disabled Vehicle” in “What To Do In Emergencies” for further information.
219
UTILITY
Recreational Towing — All Models
DO NOT flat tow this vehicle. Damage to the drivetrain will result.
CAUTION!
• DO NOT flat tow this vehicle. Damage to the drivetrain will result. If this vehicle requires
towing, make sure the drive wheels are OFF the ground.
• Ensure that the Electric Park Brake is released, and remains released, while being towed.
• Towing this vehicle in violation of the above requirements can cause severe transmission
damage. Damage from improper towing is not covered under the New Vehicle Limited
Warranty.
Recreational towing is allowed ONLY if the front wheels are OFF the ground. This may be
accomplished using a tow dolly (front wheels off the ground) or vehicle trailer (all four wheels off
the ground). If using a tow dolly, follow this procedure:
1. Properly secure the dolly to the tow vehicle, following the dolly manufacturer's instructions.
2. Drive the front wheels onto the tow dolly.
3. Apply the park brake.
4. Place the transmission in PARK.
5. Turn the ignition OFF.
6. Properly secure the front wheels to the dolly, following the dolly manufacturer's instructions.
7. Turn the ignition to the ON/RUN position, but do not start the vehicle.
8. Press and hold the brake pedal.
9. Release the park brake.
10. Turn the ignition OFF.
11. Release the brake pedal.
220
W H AT TO D O I N E M E R G E N C I E S
ROADSIDE ASSISTANCE
Dial toll-free
1-800-521-2779
for U.S. Residents or
1-800-363-4869
for Canadian Residents.
• Provide your name, vehicle identification number, license plate number, and your location,
including the telephone number from which you are calling.
• Briefly describe the nature of the problem and answer a few simple questions.
• You will be given the name of the service provider and an estimated time of arrival. If you feel
you are in an “unsafe situation”, please let us know. With your consent, we will contact local
police or safety authorities.
NOTE:
If vehicle is equipped with a Uconnect 8.4 or 8.4 NAV, you can also push the ASSIST button to
be connected with Roadside Assistance.
221
W H AT TO D O I N E M E R G E N C I E S
WARNING/INDICATOR LIGHTS AND
MESSAGES
The warning/indicator light switches on in the instrument panel together with a dedicated
message and/or acoustic signal when applicable. These indications are indicative and precautionary and as such must not be considered as exhaustive and/or alternative to the information
contained in the Owner Manual, which you are advised to read carefully in all cases. Always refer
to the information in this chapter in the event of a failure indication.
All active telltales will display first, if applicable. The system check menu may appear different
based upon equipment options and current vehicle status. Some telltales are optional and may
not appear.
The following warning lamps and indicators will alert you to a vehicle condition that may become
serious. Some lamps will illuminate when you start your vehicle to make sure they work. If any
lamps remain on after starting your vehicle, refer to the respective system warning lamp for
further information.
Instrument Cluster Warning Lights
– Air Bag Warning Light
If the light is not on during startup, stays on, or turns on while driving have the vehicle serviced by
an authorized dealer immediately.
– Seat Belt Reminder Light
When the ignition is placed in the ON/RUN position, this light will turn on for four to eight
seconds as a bulb check. During the bulb check, if the driver's seat belt is unbuckled, a chime will
sound. After the bulb check or when driving, if the driver or front passenger seat belt remains
unbuckled, the Seat Belt Indicator Light will flash or remain on continuously.
– Low Fuel Warning Light
This warning light indicates when the fuel level reaches approximately 1.5 gal (5.8 L). This light
will turn on and a single chime will sound.
– Malfunction Indicator Light (MIL)
Certain conditions, such as a loose or missing gas cap, poor fuel quality, etc., may illuminate the
MIL after engine start. The vehicle should be serviced if the light stays on through several typical
driving cycles. In most situations, the vehicle will drive normally and not require towing.
If the MIL flashes when the engine is running, serious conditions may exist that could lead to
immediate loss of power or severe catalytic converter damage. We recommend you do not
operate the vehicle. Have the vehicle serviced immediately.
222
W H AT TO D O I N E M E R G E N C I E S
– Oil Pressure Warning Light
This light indicates low engine oil pressure. If the light turns on while driving, stop the vehicle and
shut off the engine as soon as possible. A chime will sound when this light turns on.
We recommend you do not operate the vehicle or engine damage will occur. Have the vehicle
serviced immediately.
– Oil Temperature Warning Light
This telltale indicates engine oil temperature is high. If the light turns on while driving, stop the
vehicle and shut off the engine as soon as possible.
– Electric Power Steering System Warning Light
This light is used to manage the electrical warning of the EPS (Electric Power Steering System).
When the ignition is placed in the ON/RUN position, the warning light will illuminate momentarily. If the warning light stays on, cycle the ignition to the OFF position and back to ON/RUN.
If the warning light stays on, contact your authorized dealer.
If the warning light switches on while driving, you may not have steering assistance. Although it
will still be possible to steer the car, the effort needed to operate the steering wheel could be
increased: contact an authorized dealer as soon as possible.
– Anti-Lock Brake (ABS) Light
This light monitors the Anti-Lock Brake System (ABS).
If the light is not on during startup, stays on, or turns on while driving we recommend you contact
the nearest authorized dealer and have the vehicle serviced immediately.
– Battery Charge Warning Light
This light illuminates when the battery is not charging properly. If the battery charge warning light
remains on, it means that the vehicle is experiencing a problem with the charging system.
It is recommended that you do not continue driving if the battery charge warning light is on. Have
the vehicle serviced immediately.
– Brake Warning Light
This light monitors various brake functions, including brake fluid level and parking brake application. If the brake light turns on, it may indicate that the parking brake is applied, that the brake
fluid level is low, or that there is a problem with the brake system master cylinder reservoir.
If the light remains on when the parking brake has been disengaged, and the fluid level is at the
full mark on the master cylinder reservoir, it indicates a possible brake hydraulic system malfunction or that a problem with the Brake Booster has been detected by the Anti-Lock Brake System
(ABS)/Electronic Stability Control (ESC) system. In this case, the light will remain on until the
condition has been corrected. If the problem is related to the brake booster, the ABS pump will
run when applying the brake, and a brake pedal pulsation may be felt during each stop.
223
W H AT TO D O I N E M E R G E N C I E S
The dual brake system provides a reserve braking capacity in the event of a failure to a portion of
the hydraulic system. A leak in either half of the dual brake system is indicated by the Brake
Warning Light, which will turn on when the brake fluid level in the master cylinder has dropped
below a specified level. The light will remain on until the cause is corrected.
Vehicles equipped with the Anti-Lock Brake System (ABS) are also equipped with Electronic
Brake Force Distribution (EBD). In the event of an EBD failure, the Brake Warning Light will turn
on along with the ABS Light. Immediate repair to the ABS system is required.
Operation of the Brake Warning Light can be checked by turning the ignition switch from the
OFF position to the ON/RUN position. The light should illuminate for approximately two
seconds. The light should then turn off unless the parking brake is applied or a brake fault is
detected. If the light does not illuminate, have the light inspected by an authorized dealer.
The light also will turn on when the parking brake is applied with the ignition switch in the
ON/RUN position.
NOTE:
This light shows only that the parking brake is applied. It does not show the degree of brake
application.
WARNING!
Driving a vehicle with the red brake light on is dangerous. Part of the brake system may have
failed. It will take longer to stop the vehicle. You could have a collision. Have the vehicle
checked immediately.
– Electronic Throttle Control (ETC) Indicator Light
This light informs you of a problem with the system.
If a problem is detected, the light will come on while the engine is running. Cycle the ignition
when the vehicle has completely stopped and the gear selector is placed in the PARK position;
the light should turn off.
If the light remains lit with the engine running, your vehicle will usually be drivable. However, see
an authorized dealer immediately. If the light is flashing when the engine is running, immediate
service is required, and you may experience reduced performance, an elevated/rough idle or
engine stall, and your vehicle may require towing.
– Electronic Stability Control (ESC) Indicator Light
If this indicator light flashes during acceleration, apply as little throttle as possible. While driving,
ease up on the accelerator. Adapt your speed and driving to the prevailing road conditions. To
improve the vehicle's traction when starting off in deep snow, sand or gravel, it may be desirable
to switch the ESC system off.
224
W H AT TO D O I N E M E R G E N C I E S
– Transmission Temperature Warning Light
This light indicates that there is excessive transmission fluid temperature that might occur with
severe usage such as trailer towing. If this light turns on, you will experience reduced vehicle
performance until the automatic transmission cools down. If the overheating continues, stop the
vehicle and run the engine at idle, with the transmission in NEUTRAL, until the light turns off.
Once the light turns off, you may continue to drive normally.
WARNING!
If you continue operating the vehicle when the Transmission Temperature Warning Light is
illuminated you could cause the fluid to boil over, come in contact with hot engine or exhaust
components and cause a fire.
CAUTION!
Continuous driving with the Transmission Temperature Warning Light illuminated will eventually cause severe transmission damage or transmission failure.
– Tire Pressure Monitoring System (TPMS) Light
Each tire, including the spare (if provided), should be checked monthly when cold and inflated to
the inflation pressure recommended by the vehicle manufacturer on the vehicle placard or tire
inflation pressure label. (If your vehicle has tires of a different size than the size indicated on the
vehicle placard or tire inflation pressure label, you should determine the proper tire inflation
pressure for those tires).
As an added safety feature, your vehicle has been equipped with a tire pressure monitoring
system (TPMS) that illuminates a low tire pressure telltale when one or more of your tires is
significantly under-inflated. Accordingly, when the low tire pressure telltale illuminates, you
should stop and check your tires as soon as possible and inflate them to the proper pressure.
Driving on a significantly under-inflated tire causes the tire to overheat and can lead to tire failure.
Under-inflation also reduces fuel efficiency and tire tread life and may affect the vehicle’s
handling and stopping ability.
IF THE LIGHT STARTS FLASHING INDICATING A LOW TIRE PRESSURE, ADJUST
THE AIR PRESSURE IN THE LOW TIRE TO THE AIR PRESSURE SHOWN ON THE
VEHICLE PLACARD OR TIRE INFLATION PRESSURE LABEL LOCATED ON THE
DRIVER'S DOOR.
NOTE:
AFTER INFLATION, THE VEHICLE MAY NEED TO BE DRIVEN FOR 20 MINUTES
BEFORE THE FLASHING LIGHT WILL TURN OFF.
225
W H AT TO D O I N E M E R G E N C I E S
Please note that the TPMS is not a substitute for proper tire maintenance, and it is the driver’s
responsibility to maintain correct tire pressure, even if under-inflation has not reached the level to
trigger illumination of the TPMS low tire pressure telltale.
Your vehicle has also been equipped with a TPMS malfunction indicator to indicate when the
system is not operating properly. The TPMS malfunction indicator is combined with the low tire
pressure telltale.
When the system detects a malfunction, the telltale will flash for approximately one minute and
then remain continuously illuminated. This sequence will continue upon subsequent vehicle
start-ups as long as the malfunction exists. When the malfunction indicator is illuminated, the
system may not be able to detect or signal low tire pressure as intended. TPMS malfunctions may
occur for a variety of reasons, including the installation of replacement or alternate tires or wheels
on the vehicle that prevent the TPMS from functioning properly. Always check the TPMS
malfunction telltale after replacing one or more tires or wheels on your vehicle to ensure that the
replacement or alternate tires and wheels allow the TPMS to continue to function properly.
NOTE:
Tire pressures change by approximately 1 psi (7 kPa) per 12° F (7° C) of air temperature change.
Keep this in mind when checking tire pressure inside a garage, especially in the Winter. Example:
If garage temperature is 68°F (20°C), and the outside temperature is 32°F (0°C), then the cold
tire inflation pressure should be increased by 3 psi (21 kPa), which equals 1 psi (7 kPa) for every
12°F (7°C) for this outside temperature condition.
CAUTION!
The TPMS has been optimized for the original equipment tires and wheels. TPMS pressures
and warning have been established for the tire size equipped on your vehicle. Undesirable
system operation or sensor damage may result when using replacement equipment that is not
of the same size, type, and/or style. Aftermarket wheels can cause sensor damage. Do not use
tire sealant from a can, or balance beads if your vehicle is equipped with a TPMS, as damage
to the sensors may result.
226
W H AT TO D O I N E M E R G E N C I E S
Instrument Cluster Indicator Lights
– Turn Signal Indicator
The arrows will flash with the exterior turn signals when the turn signal lever is operated. A tone
will chime, and a message will appear if either turn signal is left on for more than 1 mile (1.6 km).
NOTE:
If either indicator flashes at a rapid rate, check for a defective outside light bulb.
– Front Fog Light Indicator
This indicator will illuminate when the front fog lights are on.
– Park/Headlight ON Indicator
This indicator will illuminate when the park lights or headlights are turned on.
– High Beam Indicator
Indicates that headlights are on high beam.
— Vehicle Security Light
Indicates that the vehicle security system is armed.
– Low Windshield Washer Fluid Indicator — If Equipped
This indicator will illuminate when the windshield washer fluid is low.
– Forward Collision Warning (FCW) OFF Indicator
NOTE:
• The default status of FCW is “On.” This allows the system to warn you of a possible collision
with the vehicle in front of you.
• The forward collision button is located in the Uconnect display.
To turn the FCW system OFF, push the forward collision button once to turn the system OFF
(telltale will illuminate in the cluster).
Refer to “Forward Collision Warning (FCW)” in “Operating Your Vehicle” for further information.
– Service Forward Collision Warning (FCW) System Indicator Light
This telltale will turn on to indicate that the Forward Collision Warning (FCW) system is not
functioning properly and service is required. Contact your authorized dealer for service.
– KeySense Indicator Light
This indicator will illuminate when a KeySense key fob is detected upon startup of the vehicle.
While the KeySense key is in use, the vehicle will respond to customized vehicle settings and
mandatory settings which were specified when the KeySense key was activated and given a PIN.
227
W H AT TO D O I N E M E R G E N C I E S
– LaneSense Indicator Light
This light will appear either white, yellow, or green in the instrument cluster. Depending on which
color it appears, it could mean one of the following:
• White — The LaneSense Indicator Light turns on and is white when the LaneSense system is
on, and none, or only the left, or right, lane marking has been detected.
• Yellow — The LaneSense Indicator Light turns yellow when the LaneSense system is on, and
has detected a lane drift situation. It will begin to flash when the system sense the lane has been
approached and the vehicle is in a lane departure situation.
• Green — The LaneSense Indicator Light turns green when the LaneSense system is on, both
lane markings have been detected, and the system is “armed” to indicate lane drifts and
departures.
– LaneSense Failure Indicator Light
This telltale will turn on to indicate that the LaneSense system is not functioning properly and
service is required. Contact your authorized dealer for service.
– Door Open Indicator
This indicator will illuminate when a door(s) is left open and not fully closed.
– Liftgate Ajar Indicator — If Equipped
This indicator will illuminate when the liftgate is left open and not fully closed.
– Hood Open Indicator Light
This indicator will illuminate when the hood is left open and not fully closed.
– Electronic Park Brake Failure Indicator
This light indicates the Electronic Parking Brake system requires service.
– Electronic Stability Control (ESC) OFF Indicator Light
The ESC Off mode is intended for off-highway or off-road use only and should not be used on
any public roadways. In this mode, all TCS and ESC stability features are turned OFF. To enter
the “Full Off” mode, push and hold the “ESC” switch for five seconds while the vehicle is stopped
with the engine running. After five seconds, a chime will sound, the “ESC OFF” Indicator Light”
will illuminate, and the "ESC OFF" message will display in the vehicle cluster. To turn ESC ON
again, momentarily push the “ESC” switch.
– Speed Control ON Indicator
This indicator will illuminate when the speed control has been activated to the “ON” position.
– Speed Control SET Indicator
This indicator will illuminate when the speed control’s cruising speed has been set.
228
W H AT TO D O I N E M E R G E N C I E S
– Adaptive Cruise Control (ACC) Indicator Light
This light will appear either white or green in the instrument cluster. Depending on which color it
appears, it could mean one of the following:
• White — The Adaptive Cruise Control Indicator Light turns on and is white when the ACC
system is on, but not set to a specific speed.
• Green — The Adaptive Cruise Control Indicator Light turns from white to green when the
ACC system is set to a specific speed, but no target vehicle is detected.
– Adaptive Cruise Control (ACC) With Target Detected Indicator Light
This light will appear either white or green in the instrument cluster. Depending on which color it
appears, it could mean one of the following:
• White — The Adaptive Cruise Control (ACC) With Target Detected Indicator Light turns on
and is white when the ACC system is on, but set to a specific speed, and a target vehicle is
detected.
• Green — The Adaptive Cruise Control (ACC) With Target Detected Indicator Light turns
from white to green when the ACC system is set to a specific speed, and a target vehicle is
detected.
– Speed Warning Indicator Light
This telltale will illuminate when the Speed Warning feature is turned on and set to a specific
speed. The number displayed will be the same as the specific speed set when the Speed Warning
Feature was turned on. If this speed is exceeded, the telltale will change from white to yellow, a
chime will sound for up to 10 seconds, and a message will pop up in the instrument cluster.
Oil Life Reset
• Your vehicle is equipped with an engine oil change indicator system. The “Oil Change Due”
message will display for approximately five seconds after a single chime has sounded, to
indicate the next scheduled oil change interval. The engine oil change indicator system is duty
cycle based, which means the engine oil change interval may fluctuate, dependent upon your
personal driving style.
229
W H AT TO D O I N E M E R G E N C I E S
• Unless reset, this message will continue to display each time the ignition is cycled to the
ON/RUN position.
• To reset the oil change indicator after performing the scheduled maintenance, refer to the
following procedure.
Without pressing the brake pedal, push the
ENGINE START/STOP button and place the
ignition in the ON/RUN position (do not start
the vehicle.)
1. Push the OK button to enter the instrument
cluster display menu screen.
2. Push and release the down arrow button to
access the ”Oil Life” menu screen.
3. Push the left arrow button or right arrow
button to access the “Vehicle Info” submenu.
4. Hold the OK button to reset the “Oil Life”
to 100%.
Keyless Push Button Ignition
5. Push the up arrow button to exit the instrument cluster display menu screen.
NOTE:
If the indicator message illuminates when you start the vehicle, the oil change indicator system did
not reset. If necessary, repeat this procedure.
IF YOUR ENGINE OVERHEATS
In any of the following situations, you can reduce the potential for overheating by taking the
appropriate action.
• On the highways — slow down.
• In city traffic — while stopped, place the transmission in NEUTRAL, but do not increase engine
idle speed.
NOTE:
There are steps that you can take to slow down an impending overheat condition:
• If your air conditioner (A/C) is on, turn it off. The A/C system adds heat to the engine cooling
system and turning the A/C off can help remove this heat.
• You can also turn the temperature control to maximum heat, the mode control to floor and the
blower control to high. This allows the heater core to act as a supplement to the radiator and
aids in removing heat from the engine cooling system.
230
W H AT TO D O I N E M E R G E N C I E S
WARNING!
You or others can be badly burned by hot engine coolant (antifreeze) or steam from your
radiator. If you see or hear steam coming from under the hood, do not open the hood until the
radiator has had time to cool. Never try to open a cooling system pressure cap when the
radiator or coolant bottle is hot.
CAUTION!
Driving with a hot cooling system could damage your vehicle. If temperature gauge reads “H”,
pull over and stop the vehicle. Idle the vehicle with the air conditioner turned off until the
pointer drops back into the normal range. If the pointer remains on the “H”, turn the engine off
immediately, and call for service.
TIRE SERVICE KIT — IF EQUIPPED
Your vehicle may be equipped with a Tire Service Kit. Small punctures up to 1/4 inch (6 mm)
in the tire tread can be sealed with Tire Service
Kit. Foreign objects (e.g., screws or nails)
should not be removed from the tire. Tire Service Kit can be used in outside temperatures
down to approximately -4°F (-20°C). This kit
will provide a temporary tire seal, allowing you
to drive your vehicle up to 100 miles (160 km)
with a maximum speed of 50 mph (80 km/h).
Tire Service Kit Storage
Tire Service Kit Location
The Tire Service Kit is secured with a strap and is stored in the storage bin located behind the rear
cargo trim panel.
231
W H AT TO D O I N E M E R G E N C I E S
Tire Service Kit And Components And Operation
Tire Service Kit (Top View)
1 — Power Plug
2 — Mode Select Knob
3 — Pressure Gauge
4 — Power Switch
5 — Deflation Button
Tire Service Kit (Bottom View)
1 — Sealant Bottle
2 — Hose Attachments
3 — Sealant/Air Hose
Using The Mode Select Knob And Hoses
Your Tire Service Kit is equipped with the following symbols to indicate the air or sealant mode.
Selecting Air Mode
Push in the Mode Select Knob and turn to this position for air pump operation only.
Selecting Sealant Mode
Push in the Mode Select Knob and turn to this position to inject the Tire Service Kit Sealant and
to inflate the tire.
Using The Power Button
Push and release the Power Button once to turn On the Tire Service Kit. Push and release the
Power Button again to turn Off the Tire Service Kit.
Using The Deflation Button
Push the Deflation Button to reduce the air pressure in the tire if it becomes over-inflated.
Tire Service Kit Usage Precautions
• Replace the Tire Service Kit Sealant Bottle prior to the expiration date (printed at the lower
right hand corner on the bottle label) to assure optimum operation of the system. Refer to
“Sealant Bottle Replacement” in this section.
• The Sealant Bottle is a one tire application use and needs to be replaced after each use. Always
replace these components immediately at your original equipment vehicle dealer.
• When the Tire Service Kit sealant is in a liquid form, clean water, and a damp cloth will remove
the material from the vehicle or tire and wheel components. Once the sealant dries, it can
easily be peeled off and properly discarded.
232
W H AT TO D O I N E M E R G E N C I E S
• For optimum performance, make sure the valve stem on the wheel is free of debris before
connecting the Tire Service Kit.
• The Tire Service Kit Sealant is only intended to seal punctures less than 1/4 inch (6 mm)
diameter in the tread/contact surface of your vehicle’s tires.
• The Tire Service Kit Sealant is not intended to seal punctures on the tires' side walls.
• You can use the Tire Service Kit air pump to inflate bicycle tires. The kit also comes with two
needles, located in the Accessory Storage Compartment (on the bottom of the air pump) for
inflating sport balls, rafts, or similar inflatable items. However, use only the Air Pump and make
sure the Mode Select Knob is in the Air Mode when inflating such items to avoid injecting
sealant into them.
• Do not lift or carry the Tire Service Kit by the hoses.
WARNING!
• Do not attempt to seal a tire on the side of the vehicle closest to traffic. Pull far enough off
the road to avoid the danger of being hit when using the Tire Service Kit.
• Do not use Tire Service Kit or drive the vehicle under the following circumstances:
• If the puncture in the tire tread is approximately 1/4 inch (6 mm) or larger.
• If the tire has any sidewall damage.
• If the tire has any damage from driving with extremely low tire pressure.
• If the tire has any damage from driving on a flat tire.
• If the wheel has any damage.
• If you are unsure of the condition of the tire or the wheel.
• Keep Tire Service Kit away from open flames or heat source.
• A loose Tire Service Kit thrown forward in a collision or hard stop could endanger the
occupants of the vehicle. Always stow the Tire Service Kit in the place provided. Failure to
follow these warnings can result in injuries that are serious or fatal to you, your passengers,
and others around you.
• Take care not to allow the contents of Tire Service Kit to come in contact with hair, eyes, or
clothing. Tire Service Kit sealant is harmful if inhaled, swallowed, or absorbed through the
skin. It causes skin, eye, and respiratory irritation. Flush immediately with plenty of water if
there is any contact with eyes or skin. Change clothing as soon as possible, if there is any
contact with clothing.
• Tire Service Kit Sealant solution contains latex. In case of an allergic reaction or rash, consult
a physician immediately. Keep Tire Service Kit out of reach of children. If swallowed, rinse
mouth immediately with plenty of water and drink plenty of water. Do not induce vomiting!
Consult a physician immediately.
Sealing A Tire With Tire Service Kit
Whenever You Stop To Use Tire Service Kit:
1. Pull over to a safe location and turn on the vehicle’s Hazard Warning flashers.
2. Verify that the valve stem (on the wheel with the deflated tire) is in a position that is near to the
ground. This will allow the Tire Service Kit Hose to reach the valve stem and keep the Tire
233
W H AT TO D O I N E M E R G E N C I E S
Service Kit flat on the ground. This will provide the best positioning of the kit when injecting
the sealant into the deflated tire and running the air pump. Move the vehicle as necessary to
place the valve stem in this position before proceeding.
3. Place the transmission in PARK and cycle the ignition in the OFF position.
4. Apply the parking brake.
Setting Up To Use Tire Service Kit:
1. Uncoil the Sealant Hose and then remove the cap from the fitting at the end of the hose.
2. Place the Tire Service Kit flat on the ground next to the deflated tire.
3. Remove the cap from the valve stem and then screw the fitting at the end of the Sealant Hose
onto the valve stem.
4. Uncoil the Power Plug and insert the plug into the vehicle’s 12 Volt power outlet.
NOTE:
Do not remove foreign objects (e.g., screws or nails) from the tire.
Injecting Tire Service Kit Sealant Into The Deflated Tire:
1. Always start the vehicle before turning ON the Tire Service Kit.
2. Ensure the Mode Select Knob is to the Sealant Mode position.
3. After pushing the Power Button, the sealant (white fluid) will flow from the Sealant Bottle
through the Sealant Hose and into the tire.
NOTE:
Sealant may leak out through the puncture in the tire.
If the sealant (white fluid) does not flow within 0 – 10 seconds through the Sealant Hose:
1. Push the Power Button to turn Off the Tire Service Kit. Disconnect the Sealant Hose from the
valve stem. Make sure the valve stem is free of debris. Reconnect the Sealant Hose to the valve
stem. Check that the Mode Select Knob is in the Sealant Mode position and not Air Mode.
Push the Power Button to turn On the Tire Service Kit.
2. Connect the Power Plug to a different 12 Volt power outlet in your vehicle or another vehicle,
if available. Make sure the vehicle is running before turning ON the Tire Service Kit.
3. The Sealant Bottle may be empty due to previous use. Call for assistance.
If the sealant (white fluid) does flow through the Sealant Hose:
1. Continue to operate the pump until sealant is no longer flowing through hose (typically takes
30 - 70 seconds). As the sealant flows through the Sealant Hose, the Pressure Gauge can read
as high as 70 psi (4.8 Bar). The Pressure Gauge will decrease quickly from approximately 70 psi
(4.8 Bar) to the actual tire pressure when the Sealant Bottle is empty.
2. The pump will start to inject air into the tire immediately after the Sealant Bottle is empty.
Continue to operate the pump and inflate the tire to the cold tire inflation pressure found on
the tire and loading information label located in the driver-side door opening. Check the tire
pressure by looking at the Pressure Gauge.
234
W H AT TO D O I N E M E R G E N C I E S
If the tire does not inflate to at least 26 psi (1.8 Bar) pressure within 15 minutes:
• The tire is too badly damaged. Do not attempt to drive the vehicle further. Call for assistance.
If the tire inflates to the recommended pressure or is at least 26 psi (1.8 Bar) pressure within
15 minutes:
NOTE:
If the tire becomes over-inflated, push the Deflation Button to reduce the tire pressure to the
recommended inflation pressure before continuing.
1. Push the Power Button to turn off the Tire Service Kit.
2. Remove the speed limit label from the Tire Service Kit and place sticker on the steering wheel.
3. Immediately disconnect the Sealant Hose from the valve stem, reinstall the cap on the fitting
at the end of the hose, and place the Tire Service Kit in the vehicle storage location. Proceed
to “Drive Vehicle.”
Drive Vehicle:
Immediately after injecting sealant and inflating the tire, drive the vehicle 5 miles (8 km) or
10 minutes to ensure distribution of the Tire Service Kit Sealant within the tire. Do not exceed
50 mph (80 km/h).
WARNING!
Tire Service Kit is not a permanent flat tire repair. Have the tire inspected and repaired or
replaced after using Tire Service Kit. Do not exceed 50 mph (80 km/h) until the tire is repaired
or replaced. Failure to follow this warning can result in injuries that are serious or fatal to you,
your passengers, and others around you. Have the tire checked as soon as possible at your
authorized dealer.
After Driving:
Pull over to a safe location. Refer to “Whenever You Stop To Use Tire Service Kit” in this section
before continuing.
1. Uncoil the Sealant Hose, and then remove the cap from the fitting at the end of the hose.
2. Place the Tire Service Kit flat on the ground next to the deflated tire.
3. Remove the cap from the valve stem, and then screw the fitting at the end of the Sealant Hose
onto the valve stem.
4. Uncoil the power plug and insert the plug into the vehicle's 12 Volt power outlet.
5. Uncoil the Hose and screw the fitting at the end of the hose onto the valve stem.
6. Turn the Mode Select Knob and turn to the Air Mode position.
7. Check the pressure in the tire by reading the Pressure Gauge.
235
W H AT TO D O I N E M E R G E N C I E S
If tire pressure is less than 19 psi (1.3 Bar):
The tire is too badly damaged. Do not attempt to drive the vehicle further. Call for assistance.
If the tire pressure is 19 psi (1.3 Bar) or higher:
1. Push the Power Button to turn on Tire Service Kit and inflate the tire to the cold tire inflation
pressure found on the tire and loading information label located in the driver-side door
opening.
NOTE:
If the tire becomes over-inflated, push the Deflation Button to reduce the tire pressure to the
recommended inflation pressure before continuing.
2. Disconnect the Tire Service Kit from the valve stem, reinstall the cap on the valve stem and
unplug from 12 Volt outlet.
3. Place the Tire Service Kit in its proper storage area in the vehicle.
4. Have the tire inspected and repaired or replaced at the earliest opportunity at an authorized
dealer or tire service center.
5. Remove the Speed Limit sticker from the steering wheel after the tire has been repaired.
6. Replace the Sealant Bottle at your authorized dealer as soon as possible. Refer to “Sealant
Bottle Replacement”.
NOTE:
When having the tire serviced, advise the authorized dealer or service center that the tire has
been sealed using the Tire Service Kit.
Sealant Bottle Replacement:
1. Unwrap the power cord.
2. Unwrap the hose.
3. Remove the bottle cover.
4. Rotate the bottle up beyond vertical to release.
5. Pull the bottle away from the Compressor.
NOTE:
• For sealant bottle installation, follow these steps reverse order.
• Replacement sealant bottles are available at authorized service centers.
236
W H AT TO D O I N E M E R G E N C I E S
JACKING AND TIRE CHANGING —
IF EQUIPPED
WARNING!
• Do not attempt to change a tire on the side of the vehicle close to moving traffic. Pull far
enough off the road to avoid the danger of being hit when operating the jack or changing
the wheel.
• Being under a jacked-up vehicle is dangerous. The vehicle could slip off the jack and fall on
you. You could be crushed. Never put any part of your body under a vehicle that is on a jack.
If you need to get under a raised vehicle, take it to a service center where it can be raised on
a lift.
• The jack is designed to be used as a tool for changing tires only. The jack should not be used
to lift the vehicle for service purposes. The vehicle should be jacked on a firm level surface
only. Avoid ice or slippery areas.
Jack And Spare Tire Location
The jacking tools, spare tire and portable air compressor (if equipped) or tire service kit (if
equipped) are stowed behind an access panel on the left hand side of the vehicle.
Jacking Equipment Location
237
W H AT TO D O I N E M E R G E N C I E S
Equipment Removal
1. Remove the access panel to the jacking equipment.
2. Unlatch the Portable Air Compressor or Tire Service Kit if equipped. Unscrew the wing nut
that is holding the Inflatable Spare Tire and gently remove it from the storage area. Remove
wrench from foam tray.
Jacking Equipment
1 — Inflatable Spare Tire
2 — Portable Air Compressor
3. Remove Jack by turning the jack screw
counterclockwise to collapse from storage area that is located behind the tire.
Jacking Equipment
1 — Wrench
2 — Jack
238
W H AT TO D O I N E M E R G E N C I E S
Preparations For Jacking
1. Park the vehicle on a firm, level surface. Avoid ice or slippery areas.
WARNING!
Do not attempt to change a tire on the side of the vehicle close to moving traffic, pull far
enough off the road to avoid being hit when operating the jack or changing the wheel.
2. Turn on the Hazard Warning flasher.
3. Apply the parking brake.
4. Place the gear selector into PARK.
5. Place the ignition in OFF mode.
6. Block both the front and rear of the wheel diagonally opposite of the jacking position. For
example, if changing the right front tire, block the left rear wheel.
NOTE:
Passengers should not remain in the vehicle
when the vehicle is being jacked.
Wheels Blocked
239
W H AT TO D O I N E M E R G E N C I E S
Jacking Instructions
WARNING!
Carefully follow these tire changing warnings to help prevent personal injury or damage to
your vehicle:
• Always park on a firm, level surface as far from the edge of the roadway as possible before
raising the vehicle.
• Turn on the Hazard Warning flasher.
• Block the wheel diagonally opposite the wheel to be raised.
• Set the parking brake firmly and set the transmission in PARK.
• Do not let any passenger sit in the vehicle when it is on a jack.
• Do not get under the vehicle when it is on a jack. If you need to get under a raised vehicle,
take it to a service center where it can be raised on a lift.
• Only use the jack in the positions indicated and for lifting this vehicle during a tire change.
• If working on or near a roadway, be extremely careful of motor traffic.
Warning Label
CAUTION!
Do not attempt to raise the vehicle by jacking on locations other than those indicated in the
Jacking Instructions for this vehicle.
NOTE:
Refer to “Tires” in “Servicing And Maintenance” in your Owner’s Manual on www.chrysler.com/
en/owners/manuals for information about the inflatable spare tire, its use, and operation.
240
W H AT TO D O I N E M E R G E N C I E S
1. Loosen (but do not remove) the wheel lug nuts by turning them to the left one turn while the
wheel is still on the ground.
2. There are two jack engagement locations on each side of the vehicle body. These locations are
on the sill flange of the vehicle body.
Jack Engagement Locations
Front Jacking Location Engaged
Rear Jacking Location Engaged
WARNING!
Being under a jacked-up vehicle is dangerous. The vehicle could slip off the jack and fall on
you. You could be crushed. Never get any part of your body under a vehicle that is on a jack.
If you need to get under a raised vehicle, take it to a service center where it can be raised on
a lift.
241
W H AT TO D O I N E M E R G E N C I E S
CAUTION!
Do not attempt to raise the vehicle by jacking on locations other than those indicated.
3. Place the wrench on the jack screw and turn to the right until the jack head is properly engaged
in the described location. Do not raise the vehicle until you are sure the jack is securely
engaged.
4. Raise the vehicle by turning the jack screw to the right, using the swivel wrench. Raise the
vehicle only until the tire just clears the surface and enough clearance is obtained to install the
compact spare tire. Minimum tire lift provides maximum stability.
WARNING!
Raising the vehicle higher than necessary can make the vehicle less stable. It could slip off the
jack and hurt someone near it. Raise the vehicle only enough to remove the tire.
5. Remove the wheel lug nuts, for vehicles with wheel covers, remove the cover from the wheel
by hand. Do not pry the wheel cover off. Then pull the wheel off the hub.
6. Install the inflatable spare on the vehicle, located in the rear cargo area of the vehicle.
WARNING!
To avoid the risk of forcing the vehicle off the jack, do not tighten the wheel nuts fully until the
vehicle has been lowered. Failure to follow this warning may result in serious injury.
Installing Compact Spare
242
W H AT TO D O I N E M E R G E N C I E S
CAUTION!
Be sure to mount the inflatable spare tire with the valve stem facing outward. The vehicle
could be damaged if the inflatable spare tire is mounted incorrectly.
NOTE:
Do not install the wheel cover on the inflatable spare tire.
7. Leave the vehicle on the jack and start inflating the inflatable spare after the tire has been
mounted to the vehicle. Secure the wheel to the hub by tightening the nuts with wrench. After
inflation, once the vehicle is lowered you will have a second opportunity to “torque” the lug
nuts.
8. Inflate the tire to the prescribed pressure 60 psi (4.2 Bar) using the Portable Air Compressor
or Tire Service Kit if equipped. Refer to “Portable Air Compressor” in this section for usage
procedure if equipped. Refer to “Tire Service Kit For Inflating Tire” in this section for usage
procedure if equipped.
Inflate the tire to the prescribed pressure 60 psi (4.2 Bar) using the Portable Air Compressor.
Refer to “Portable Air Compressor” in this section for usage procedure.
9. Lower the vehicle once the inflatable Spare has reached its pressure and the compressor-hose
has been removed from the tire valve.
10. Finish tightening the lug nuts. Push down on the wrench while at the end of the handle for
increased leverage. Tighten the lug nuts in a star pattern until each nut has been tightened
twice. The correct tightness of each lug nut is 100 ft-lbs (135 N·m). If in doubt about the
correct tightness, have them checked with a torque wrench by your authorized dealer or
service station.
11. Lower the jack to its fully-closed position.
WARNING!
A loose tire or jack thrown forward in a collision or hard stop could endanger the occupants of
the vehicle. Always stow the jack parts and the spare tire in the places provided. Have the
deflated (flat) tire repaired or replaced immediately.
12. Place the deflated (flat) tire and foam tray cover assembly in the rear cargo area. Do not stow
the deflated tire in the inflatable spare tire location. Have the full-sized tire repaired or
replaced, as soon as possible.
13. Stow the jack back in the stowage compartment and place the access panel back. The stud of
the storage area must be threaded through the lower part of the jack. Then turn the Jack
Screw clockwise to secure it in place.
NOTE:
Stow the foam tray and components in the cargo area.
243
W H AT TO D O I N E M E R G E N C I E S
Road Tire Installation
Vehicles Equipped With Wheel Covers
1. Mount the road tire on the axle.
2. To ease the installation process for steel wheels with wheel covers, install two lug nuts on the
mounting studs which are on each side of the valve stem. Install the lug nuts with the cone
shaped end of the nut toward the wheel. Lightly tighten the lug nuts.
3. Align the valve notch in the wheel cover with
the valve stem on the wheel. Install the cover
by hand, snapping the cover over the two
lug nuts. Do not use a hammer or excessive
force to install the cover.
4. Install the remaining lug nuts with the cone
shaped end of the nut toward the wheel.
Lightly tighten the lug nuts.
Wheel Cover Installation
1 — Valve Stem
2 — Valve Notch
3 — Wheel Lug Nut
4 — Wheel Cover
5 — Mounting Stud
WARNING!
To avoid the risk of forcing the vehicle off the jack, do not tighten the wheel nuts fully until the
vehicle has been lowered. Failure to follow this warning may result in serious injury.
5. Lower the vehicle to the ground by turning the jack handle counterclockwise.
6. Finish tightening the lug nuts. Push down on the wrench while at the end of the handle for
increased leverage. Tighten the lug nuts in a star pattern until each nut has been tightened
twice. The correct tightness of each lug nut is 100 ft-lbs (135 N·m). If in doubt about the
correct tightness, have them checked with a torque wrench by your authorized dealer or
service station.
7. After 25 miles (40 km) check the lug nut torque with a torque wrench to ensure that all lug nuts
are properly seated against the wheel.
244
W H AT TO D O I N E M E R G E N C I E S
Vehicles Without Wheel Covers
1. Mount the road tire on the axle.
2. Install the remaining lug nuts with the cone shaped end of the nut toward the wheel. Lightly
tighten the lug nuts.
WARNING!
To avoid the risk of forcing the vehicle off the jack, do not tighten the wheel nuts fully until the
vehicle has been lowered. Failure to follow this warning may result in serious injury.
3. Lower the vehicle to the ground by turning the jack handle counterclockwise.
4. Finish tightening the lug nuts. Push down on the wrench while at the end of the handle for
increased leverage. Tighten the lug nuts in a star pattern until each nut has been tightened
twice. The correct tightness of each lug nut is 100 ft-lbs (135 N·m). If in doubt about the
correct tightness, have them checked with a torque wrench by your authorized dealer or
service station.
5. After 25 miles (40 km) check the lug nut torque with a torque wrench to ensure that all lug nuts
are properly seated against the wheel.
Portable Air Compressor — If Equipped
Your vehicle may be equipped with a Portable Air Compressor. Use the Portable Air Compressor
located in the side compartment of the cargo area to inflate the inflatable tire to 60 psi (4.2 Bar).
Portable Air Compressor (Top View)
1 — Deflation Button
2 — Pressure Gauge
3 — Power Button
Portable Air Compressor (Bottom View)
4 — Power Plug
5 — Air Hose
245
W H AT TO D O I N E M E R G E N C I E S
Portable Air Compressor Usage With Inflatable Spare Tire
1. Remove the Portable Air Compressor from the storage location.
2. Raise the vehicle as described in the Jacking Instructions within this section.
3. Install the Inflatable Spare tire as described in the Jack Instructions section in this manual.
Make sure that the valve stem is located near the ground, and then screw the air hose of the
Portable Air compressor to the valve stem.
4. Uncoil the power plug and connect it the vehicles 12 Volt power Outlet.
5. Always start the engine before turning ON the Portable Air Compressor.
6. Switch the power button ON.
7. Inflate the tire to 60 psi (4.2 Bar) recommended as per the label on the wheel or if the vehicle
equipped with the inflatable spare tire pressure indicated on the Tire and Loading information
label located on the driver-side door opening.
NOTE:
If the tire is over inflated, use the deflation button to reduce the tire air pressure.
8. After the tire reaches the recommended pressure, lower the vehicle with the jack as described
in the Jack Instructions section in this manual.
9. Remove the speed limit label sticker from the Portable Air Compressor and place it on the
center of the steering wheel.
10. Return the Portable Air Compressor to the foam tray and secure it with the strap. Store the
foam tray in the cargo area.
WARNING!
• Do not lift or carry the Portable Air Compressor by the hose.
• Always stow the Portable Air Compressor only in the provided place.
• The metal end fitting from Power Plug may get hot after use, so it should be handled
carefully.
• Keep the Portable Air Compressor away from open flames or heat source.
Tire Service Kit For Inflating Tire — If Equipped
Your vehicle may be equipped with a Tire Service Kit. Use the Tire Service Kit located in the side
compartment of the cargo area to inflate the inflatable tire to 60 psi (4.2 Bar).
Tire Service Kit And Components And Operation
Using The Mode Select Knob And Hoses
Your Tire Service Kit is equipped with the following symbols to indicate the air or sealant mode.
Selecting Air Mode
Push in the Mode Select Knob and turn to this position for air pump operation only.
246
W H AT TO D O I N E M E R G E N C I E S
Selecting Sealant Mode
Push in the Mode Select Knob and turn to this position to inject the Tire Service Kit Sealant and
to inflate the tire.
Using The Power Button
Push and release the Power Button once to turn On the Tire Service Kit. Push and release the
Power Button again to turn Off the Tire Service Kit.
Using The Deflation Button
Push the Deflation Button to reduce the air pressure in the tire if it becomes over-inflated.
WARNING!
• Keep Tire Service Kit away from open flames or heat source.
• A loose Tire Service Kit thrown forward in a collision or hard stop could endanger the
occupants of the vehicle. Always stow the Tire Service Kit in the place provided. Failure to
follow these warnings can result in injuries that are serious or fatal to you, your passengers,
and others around you.
• Take care not to allow the contents of Tire Service Kit to come in contact with hair, eyes, or
clothing. Tire Service Kit sealant is harmful if inhaled, swallowed, or absorbed through the
skin. It causes skin, eye, and respiratory irritation. Flush immediately with plenty of water if
there is any contact with eyes or skin. Change clothing as soon as possible, if there is any
contact with clothing.
• Tire Service Kit Sealant solution contains latex. In case of an allergic reaction or rash, consult
a physician immediately. Keep Tire Service Kit out of reach of children. If swallowed, rinse
mouth immediately with plenty of water and drink plenty of water. Do not induce vomiting!
Consult a physician immediately.
Whenever You Stop To Use Tire Service Kit:
1. Pull over to a safe location and turn on the vehicle’s Hazard Warning flashers.
2. Verify that the valve stem (on the wheel with the deflated tire) is in a position that is near to the
ground. This will allow the Tire Service Kit Hose to reach the valve stem and keep the Tire
Service Kit flat on the ground. This will provide the best positioning of the kit when running the
air pump. Move the vehicle as necessary to place the valve stem in this position before
proceeding.
3. Place the transmission in PARK and cycle the ignition in the OFF position.
4. Ensure the park brake is engaged.
Setting Up To Use Tire Service Kit:
1. Remove the Tire Service Kit from the storage location.
2. Uncoil the Sealant/Air Hose. Remove the cap from the valve stem and then screw the fitting
in at the end of the Sealant/Air Hose clockwise onto the valve stem.
3. Uncoil the Power Plug and insert the plug into the vehicle’s 12 Volt power outlet.
247
W H AT TO D O I N E M E R G E N C I E S
4. Place the Tire Service Kit on the ground next to the deflated tire.
5. Engage parking brake before turning the engine ON.
6. Always start the engine before turning ON the Tire Service Kit.
7. Turn the Mode Select Knob to Air Mode position.
NOTE:
Do not fill inflatable spare tire with sealant. Refer to “Tire Service Kit” in this chapter for repairing
tires.
8. Switch the power button ON.
9. Inflate the tire to 60 psi (4.2 Bar) recommended as per the label on the wheel or if the vehicle
equipped with the inflatable spare tire pressure indicated on the Tire and Loading information
label located on the driver-side door opening.
NOTE:
If the tire is over inflated, use the deflation button to reduce the tire air pressure.
10. After the tire reaches the recommended pressure, lower the vehicle with the jack as described
in the Jack Instructions section in this manual.
11. Remove the speed limit label sticker from the Tire Service Kit and place it on the center of the
steering wheel.
12. Return the Tire Service Kit to the foam tray and secure it with the strap. Store the foam tray
in the cargo area.
Return Inflatable Spare Tire
To return Inflatable Spare Tire to its storage location.
1. Return the Jack.
2. Deflate the spare tire. Use the Tire Service Kit or Portable Air Compressor and push the
deflation button to do this step. Refer to “Tire Service Kit” or “Portable Air Compressor” if
equipped in this section for additional information. The inflatable spare tire will return to its
original shape.
3. Install the inflatable spare tire back into its original stowage location and position facing
outward.
4. Install the foam tray with wrench and funnel installed.
5. Install and tighten the wing nut by hand.
6. Install the Tire Service Kit or Portable Air Compressor if equipped and tighten the strap.
7. Install access panel door.
248
W H AT TO D O I N E M E R G E N C I E S
JUMP STARTING
If your vehicle has a discharged battery it can be jump-started using a set of jumper cables and a
battery in another vehicle or by using a portable battery booster pack. Jump starting can be
dangerous if done improperly so please follow the procedures in this section carefully.
NOTE:
When using a portable battery booster pack follow the manufacturer’s operating instructions and
precautions.
WARNING!
Do not attempt jump starting if the battery is frozen. It could rupture or explode and cause
personal injury.
CAUTION!
Do not use a portable battery booster pack or any other booster source with a system voltage
greater than 12 Volts or damage to the battery, starter motor, alternator or electrical system
may occur.
Preparations For Jump Start
The battery in your vehicle is located on the left
side of the engine compartment.
Positive Battery Post
1 — Positive Battery Post
2 — Negative Battery Post
249
W H AT TO D O I N E M E R G E N C I E S
WARNING!
• Take care to avoid the radiator cooling fan whenever the hood is raised. It can start anytime
the ignition switch is ON. You can be injured by moving fan blades.
• Remove any metal jewelry such as rings, watch bands and bracelets that could make an
inadvertent electrical contact. You could be seriously injured.
• Batteries contain sulfuric acid that can burn your skin or eyes and generate hydrogen gas
which is flammable and explosive. Keep open flames or sparks away from the battery.
1. Apply the parking brake, shift the automatic transmission into PARK and place the ignition to
OFF.
2. Turn off the heater, radio, and all unnecessary electrical accessories.
3. If using another vehicle to jump-start the battery, park the vehicle within the jumper cables
reach, set the parking brake and make sure the ignition is OFF.
WARNING!
Do not allow vehicles to touch each other as this could establish a ground connection and
personal injury could result.
Jump Starting Procedure
WARNING!
Failure to follow this jump starting procedure could result in personal injury or property
damage due to battery explosion.
CAUTION!
Failure to follow these procedures could result in damage to the charging system of the
booster vehicle or the discharged vehicle.
250
W H AT TO D O I N E M E R G E N C I E S
Connecting The Jumper Cables
1. Connect the positive (+) end of the jumper cable to the positive (+) post of the vehicle with the
discharged battery.
2. Connect the opposite end of the positive (+) jumper cable to the positive (+) post of the
booster battery.
3. Connect the negative (-) end of the jumper cable to the negative (-) post of the booster
battery.
4. Connect the opposite end of the negative (-) jumper cable to the negative post near the
windshield cowl (exposed metal part of the discharged vehicle’s engine).
WARNING!
Do not connect the jumper cable to the negative (-) post of the discharged battery. The
resulting electrical spark could cause the battery to explode and could result in personal injury.
Only use the specific ground point, do not use any other exposed metal parts.
5. Start the engine in the vehicle that has the booster battery, let the engine idle a few minutes,
and then start the engine in the vehicle with the discharged battery.
6. Once the engine is started, remove the jumper cables in the reverse sequence:
Disconnecting The Jumper Cables
1. Disconnect the negative (-) end of the jumper cable from the engine ground of the vehicle
with the discharged battery.
2. Disconnect the opposite end of the negative (-) jumper cable from the negative (-) post of
the booster battery.
3. Disconnect the positive (+) end of the jumper cable from the positive (+) post of the booster
battery.
4. Disconnect the opposite end of the positive (+) jumper cable from the positive (+) post of the
vehicle with the discharged battery.
If frequent jump starting is required to start your vehicle you should have the battery and charging
system inspected at your authorized dealer.
CAUTION!
Accessories plugged into the vehicle power outlets draw power from the vehicle’s battery,
even when not in use (i.e., cellular devices, etc.). Eventually, if plugged in long enough without
engine operation, the vehicle’s battery will discharge sufficiently to degrade battery life and/or
prevent the engine from starting.
251
W H AT TO D O I N E M E R G E N C I E S
MANUAL PARK RELEASE
WARNING!
You should be seated in the driver’s seat with your foot firmly placed on the brake pedal to
maintain control of the vehicle before activating the Manual Park Release. If possible, you
should apply the parking brake. Activating the Manual Park Release will allow your vehicle to
roll away if it is not secured or properly connected to a tow vehicle. Activating the Manual Park
Release on an unsecured vehicle could lead to serious injury or death for those in or around the
vehicle.
In order to move the vehicle in cases where the transmission will not shift out of PARK (such as a
dead battery), a Manual Park Release is available.
Follow these steps to activate the Manual
Park Release:
1. Apply firm pressure to the brake pedal while
seated in the driver’s seat.
2. Apply the parking brake, if possible.
3. Using a small screwdriver or similar tool,
remove the Manual Park Release access
cover, which is to the lower left of the steering column.
Manual Park Release Access Cover
4. The Manual Park Release access cover is
connected to a red tether strap. Pull the
tether strap out as far as it will go, then release it. The transmission should now be in
NEUTRAL, allowing the vehicle to be moved.
NOTE:
When the lever is locked in the released position, the tether will remain outside of the trim panel
and the access cover cannot be re-installed.
5. Release the parking brake only when the vehicle is securely connected to a tow vehicle.
To Reset The Manual Park Release:
1. Apply firm pressure to the brake pedal while seated in the driver’s seat.
2. Pull the tether strap out again, then release it.
3. Allow the tether to retract with the lever back to its original position.
4. Verify that the transmission is in PARK.
5. Confirm that the tether has retracted fully and re-install the access cover. If the access cover
cannot be re-installed, repeat steps 1 through 4.
252
W H AT TO D O I N E M E R G E N C I E S
TOWING A DISABLED VEHICLE
This section describes procedures for towing a disabled vehicle using a commercial towing
service.
Towing Condition
Flat Tow
Wheel Lift Or Dolly Tow
Flatbed
Wheel OFF The Ground
NONE
Front
Rear
NOT ALLOWED
OK
ALL MODELS
ALL
BEST METHOD
NOT ALLOWED
Proper towing or lifting equipment is required to prevent damage to your vehicle. Use only tow
bars and other equipment designed for this purpose, following equipment manufacturer’s
instructions. Use of safety chains is mandatory. Attach a tow bar or other towing device to main
structural members of the vehicle, not to bumpers or associated brackets. State and local laws
regarding vehicles under tow must be observed.
NOTE:
• You must ensure that the Auto Park Brake feature is disabled before towing this vehicle (if rear
wheels are on the ground), to avoid inadvertent Electric Park Brake engagement. The Auto
Park Brake feature is enabled or disabled via the customer programmable features in the
Uconnect Settings.
• Vehicles with a discharged battery or total electrical failure when the electric parking brake
(EPB) is engaged, will need a wheel dolly or jack to raise the rear wheels off the ground when
moving the vehicle onto a flatbed.
The manufacturer recommends towing your vehicle with all four wheels OFF the ground using a
flatbed.
If flatbed equipment is not available, this vehicle must towed with the front wheels OFF the
ground (using a towing dolly, or wheel lift equipment with the front wheels raised).
NOTE:
Ensure that the Electric Park Brake is released, and remains released, while being towed.
CAUTION!
Towing this vehicle in violation of the above requirements can cause severe transmission
damage. Damage from improper towing is not covered under the New Vehicle Limited
Warranty.
253
W H AT TO D O I N E M E R G E N C I E S
Vehicle Recovery Tow Points
Your vehicle is equipped with Vehicle Recovery Points that can be used to recover a disabled
vehicle, located on the underbody of the vehicle.
NOTE:
• Ensure that the towing service tow hooks are properly seated and secured in the attachment
points.
• This recovery tow feature should be used by a trained professional only.
• Use approved receptacle location to free the disabled vehicle from its environment.
Front Recovery Points
CAUTION!
Recovery feature:
• Is to be used by a professional ONLY.
• Is used only to provide recovery of the vehicle.
• Is NOT to be used to recover secondary vehicle.
• Is NOT to be used for transporting the vehicle over the road, i.e. “Flat Towing”.
Recovery load should:
• Be applied at constant speed.
• Be applied parallel to the center line of the length of the vehicle.
• Not be an abrupt acceleration.
If you must use the accessories (wipers, defrosters, etc.) while being towed, the ignition must be
in the ON/RUN mode, not the ACC mode.
NOTE:
The Safehold feature will engage the Electric Park Brake whenever the driver's door is opened (if the
ignition is ON, transmission is not in PARK, and brake pedal is released). If you are towing this vehicle
with the ignition in the ON/RUN mode, you must manually disable the Electric Park Brake each time
the driver's door is opened, by pressing the brake pedal and then releasing the EPB.
If the key fob is unavailable, or the vehicle's battery is discharged, refer to “Manual Park Release” in
this section for instructions on shifting the transmission out of PARK in order to move the vehicle.
254
W H AT TO D O I N E M E R G E N C I E S
CAUTION!
• Do not use sling-type equipment when towing. Vehicle damage may occur.
• When securing the vehicle to a flatbed truck, do not attach to front or rear suspension
components. Damage to your vehicle may result from improper towing.
• Ensure that the Electric Park Brake is released, and remains released, while being towed.
FREEING A STUCK VEHICLE
If your vehicle becomes stuck in mud, sand or snow, it can often be moved using a rocking motion.
Turn the steering wheel right and left to clear the area around the front wheels. Then shift back
and forth between DRIVE and REVERSE while gently pressing the accelerator.
NOTE:
Shifts between DRIVE and REVERSE can only be achieved at wheel speeds of 5 mph (8 km/h)
or less. Whenever the transmission remains in NEUTRAL for more than two seconds, you must
press the brake pedal to engage DRIVE or REVERSE.
Use the least amount of accelerator pedal pressure that will maintain the rocking motion without
spinning the wheels or racing the engine.
NOTE:
Push the "ESC Off" switch to place the Electronic Stability Control (ESC) system in "Partial
Off" mode, before rocking the vehicle. Refer to “Electronic Brake Control” in “Safety” in the
Owner’s Manual on www.chrysler.com/en/owners/manuals for further information. Once the
vehicle has been freed, push the "ESC Off" switch again to restore "ESC On" mode.
WARNING!
Fast spinning tires can be dangerous. Forces generated by excessive wheel speeds may cause
damage, or even failure, of the axle and tires. A tire could explode and injure someone. Do not
spin your vehicle's wheels faster than 30 mph (48 km/h) or for longer than 30 seconds
continuously without stopping when you are stuck and do not let anyone near a spinning
wheel, no matter what the speed.
CAUTION!
• Racing the engine or spinning the wheels may lead to transmission overheating and failure.
Allow the engine to idle with the transmission in NEUTRAL for at least one minute after
every five rocking-motion cycles. This will minimize overheating and reduce the risk of
clutch or transmission failure during prolonged efforts to free a stuck vehicle.
• When “rocking” a stuck vehicle by shifting between DRIVE/ SECOND gear and REVERSE,
do not spin the wheels faster than 15 mph (24 km/h), or drivetrain damage may result.
• Revving the engine or spinning the wheels too fast may lead to transmission overheating
and failure. It can also damage the tires. Do not spin the wheels above 30 mph (48 km/h)
while in gear (no transmission shifting occurring).
255
W H AT TO D O I N E M E R G E N C I E S
ENHANCED ACCIDENT RESPONSE SYSTEM
(EARS)
This vehicle is equipped with an Enhanced Accident Response System.
Please refer to “Occupant Restraint Systems” in “Getting Started” for further information on the
Enhanced Accident Response System (EARS) function.
EVENT DATA RECORDER (EDR)
This vehicle is equipped with an Event Data Recorder (EDR). The main purpose of an EDR is to
record data that will assist in understanding how a vehicle’s systems performed under certain
crash or near crash-like situations, such as an air bag deployment or hitting a road obstacle.
Please refer to “Occupant Restraint Systems” in “Getting Started” for further information on the
Event Data Recorder (EDR).
256
M A I N TA I N I N G YO U R V E H I C L E
HOOD
Opening
The hood release lever (to open the primary latch) and safety latch (to open the secondary latch)
must be released to open the hood.
1. Pull the hood release lever located under the driver’s side of the instrument panel.
Hood Release Lever
2. Move to the outside of the front of the
vehicle.
3. Push the safety latch release lever toward the passenger side of the vehicle. The safety latch is
located behind the center front edge of the hood.
4. Remove the support rod from the locking
tab and insert it into the seat located on the
underside of the hood.
NOTE:
• Before lifting the hood, check that the wiper
arms are not in motion and not in the lifted
position.
• While lifting the hood, use both hands.
• Vehicle must be at a stop and the transmission must be in PARK.
Safety Latch Release Lever Location
257
M A I N TA I N I N G YO U R V E H I C L E
Closing
1. Hold up the hood with one hand and with the other hand remove the support rod from its seat
and reinsert it into the locking tab.
2. Lower the hood to approximately 12 inches (30 cm) from the engine compartment and drop
it. Make sure that the hood is completely closed.
WARNING!
Be sure the hood is fully latched before driving your vehicle. If the hood is not fully latched, it
could open when the vehicle is in motion and block your vision. Failure to follow this warning
could result in serious injury or death.
CAUTION!
To prevent possible damage, do not slam the hood to close it. Lower hood to approximately
12 inches (30 cm) and drop the hood to close. Make sure hood is fully closed for both latches.
Never drive vehicle unless hood is fully closed, with both latches engaged.
258
M A I N TA I N I N G YO U R V E H I C L E
259
M A I N TA I N I N G YO U R V E H I C L E
ENGINE COMPARTMENT — 3.6L
1. Engine Coolant Pressure Cap
2. Engine Oil Fill
3. Engine Oil Dipstick
4. Window Washer Fill
260
M A I N TA I N I N G YO U R V E H I C L E
5. Brake Fluid Reservoir
6. Engine Air Cleaner
7. Power Distribution Center (Fuses)
8. Battery
261
M A I N TA I N I N G YO U R V E H I C L E
FLUID CAPACITIES
Fuel (Approximate)
3.6L Engines
Engine Oil With Filter
3.6 Liter Engine (SAE 0W-20 ,
API Certified)
U.S.
Metric
19 Gallons
71 Liters
5 quarts
4.7 liters
Cooling System*
13.1 Quarts — Standard Duty
Cooling
13.4 Quarts — Heavy Duty
Cooling
* Includes heater and coolant reservoir filled to MAX level.
3.6 Liter Engine (Mopar
Antifreeze/Engine Coolant
10 Year/150,000 Mile Formula)
12.4 Liters — Standard Duty
Cooling
12.7 Liters — Heavy Duty
Cooling
FLUIDS AND LUBRICANTS
Engine
Component
Engine Coolant
Engine Oil – 3.6L Engine
Engine Oil Filter
Spark Plugs
Fuel Selection – 3.6L Engine
262
Fluid, Lubricant, or Genuine Part
We recommend you use Mopar Antifreeze/
Coolant 10 Year/150,000 Mile Formula OAT
(Organic Additive Technology) or equivalent
meeting the requirements of FCA Material Standard MS.90032.
We recommend you use API Certified SAE 0W20 Engine Oil, meeting the requirements of FCA
Material Standard MS-6395 such as Mopar, Pennzoil, and Shell Helix. Refer to your engine oil
filler cap for correct SAE grade.
We recommend you use a Mopar Engine Oil
Filter.
We recommend you use Mopar Spark Plugs.
87 Octane, 0-15% Ethanol (Do not use E-85).
M A I N TA I N I N G YO U R V E H I C L E
CAUTION!
• Mixing of engine coolant (antifreeze) other than specified Organic Additive Technology
(OAT) engine coolant (antifreeze), may result in engine damage and may decrease
corrosion protection. Organic Additive Technology (OAT) engine coolant is different and
should not be mixed with Hybrid Organic Additive Technology (HOAT) engine coolant
(antifreeze) or any “globally compatible” coolant (antifreeze). If a non-OAT engine coolant
(antifreeze) is introduced into the cooling system in an emergency, the cooling system will
need to be drained, flushed, and refilled with fresh OAT coolant (conforming to
MS.90032), by an authorized dealer as soon as possible.
• Do not use water alone or alcohol-based engine coolant (antifreeze) products. Do not use
additional rust inhibitors or antirust products, as they may not be compatible with the
radiator engine coolant and may plug the radiator.
• This vehicle has not been designed for use with propylene glycol-based engine coolant
(antifreeze). Use of propylene glycol-based engine coolant (antifreeze) is not recommended.
Chassis
Component
Automatic Transmission
Brake Master Cylinder
Refrigerant
Compressor Oil
Fluid, Lubricant, or Genuine Part
Use only Mopar ZF 8&9 Speed ATF Automatic
Transmission Fluid, or equivalent.
Failure to use the correct fluid may affect the
function or performance of your transmission.
We recommend you use Mopar DOT 3 Brake
Fluid, SAE J1703 should be used. If DOT 3, SAE
J1703 brake fluid is not available, then DOT 4 is
acceptable. Use only recommended brake fluids.
Use only refrigerant R-1234yf
Charge Amounts:
Single A/C System — 1.94 lb (880g)
Dual A/C System — 2.31 lb (1050g)
Use only PAG oil PSD-1:
Single A/C System — 140 ml
Dual A/C System — 190 ml
263
M A I N TA I N I N G YO U R V E H I C L E
MAINTENANCE PROCEDURES
For information on the maintenance procedures for your vehicle, please refer to “Dealer Service”
in “Servicing And Maintenance” in your Owner’s Manual on www.chrysler.com/en/
owners/manuals or in an applicable supplement for further details.
SCHEDULED SERVICING
Your vehicle is equipped with an automatic oil change indicator system. The oil change indicator
system will remind you that it is time to take your vehicle in for scheduled maintenance.
Based on engine operation conditions, the oil change indicator message will illuminate. This
means that service is required for your vehicle. Operating conditions such as frequent short-trips,
trailer tow, extremely hot or cold ambient temperatures will influence when the “Oil Change
Required” message is displayed. Severe Operating Conditions can cause the change oil message
to illuminate as early as 3,500 miles (5,600 km) since last reset. Have your vehicle serviced as soon
as possible, within the next 500 miles (805 km).
Your authorized dealer will reset the oil change indicator message after completing the scheduled
oil change. If a scheduled oil change is performed by someone other than your authorized dealer,
the message can be reset by referring to “Instrument Cluster Display” in “Getting To Know Your
Instrument Panel” located in the Owner’s Manual on www.chrysler.com/en/owners/manuals.
NOTE:
Under no circumstances should oil change intervals exceed 10,000 miles (16,000 km), twelve
months or 350 hours of engine run time, whichever comes first. The 350 hours of engine run or
idle time is generally only a concern for fleet customers.
Once A Month Or Before A Long Trip:
• Check engine oil level.
• Check windshield washer fluid level.
• Check tire pressure and look for unusual wear or damage. Rotate tires at the first sign of
irregular wear, even if it occurs before the oil indicator system turns on.
• Check the fluid levels of the coolant reservoir and brake master cylinder, fill as needed.
• Check function of all interior and exterior lights.
264
At Every Oil Change Interval As Indicated By Oil Change Indicator System:
Change oil and filter
Rotate the tires
Rotate at the first sign of irregular wear, even if it occurs before the oil indicator system turns on
Inspect battery and clean and tighten terminals as required
Inspect brake pads, shoes, rotors, drums, hoses and park brake
Inspect engine cooling system protection and hoses
Inspect exhaust system
Inspect engine air cleaner if using in dusty or off-road conditions
•
•
•
•
•
•
•
Refer to the maintenance schedules on the following page for the required maintenance intervals.
Required Maintenance Intervals
Maintenance Plan
X
X
Inspect front suspension, boot seals, tie rod ends, and replace if necessary.
Inspect the brake linings, parking brake function.
Inspect front accessory drive belt, tensioner, idler pulley, and replace if
necessary
X
Inspect the CV joints.
X
X
X
X
X
X
X
X
X
X
X
X
X
Or Kilometers:
X
20,000
32,000
X
48,000
X
64,000
X
80,000
X
96,000
X
112,000
Additional Inspections
15
14
13
30,000
12
40,000
11
50,000
10
60,000
9
70,000
8
80,000
128,000
7
90,000
144,000
6
100,000
160,000
5
110,000
176,000
4
120,000
192,000
3
130,000
208,000
2
140,000
224,000
Or Years:
150,000
240,000
Mileage or time passed (whichever comes first)
M A I N TA I N I N G YO U R V E H I C L E
265
266
X
X
Inspect and replace PCV valve if necessary.
X
X
X
X
X
Change Engine Oil at 4,000 miles (6,500 km) if the vehicle is operated in a dusty and off road environment or is operated predominately at idle or only
very low engine RPM’s. This type of vehicle use is considered Severe Duty.
Heavy Duty Use Of The Vehicle
• You can be badly injured working on or around a motor vehicle. Do only service work for which you have the knowledge and the right equipment.
If you have any doubt about your ability to perform a service job, take your vehicle to a competent mechanic.
• Failure to properly inspect and maintain your vehicle could result in a component malfunction and effect vehicle handling and performance. This
could cause an accident.
WARNING!
** The spark plug change interval is mileage based only, yearly intervals do not apply.
X
Flush and replace the engine coolant at 10 years or 150,000 miles
(240,000 km) whichever comes first.
X
Replace spark plugs**
Replace air conditioning/cabin air filter.
Replace engine air cleaner filter.
X
Or Kilometers:
X
20,000
32,000
X
48,000
X
64,000
X
80,000
X
96,000
X
112,000
Additional Maintenance
15
14
13
30,000
12
40,000
11
50,000
10
60,000
9
70,000
8
80,000
128,000
7
90,000
144,000
6
100,000
160,000
5
110,000
176,000
4
120,000
192,000
3
130,000
208,000
2
140,000
224,000
Or Years:
150,000
240,000
Mileage or time passed (whichever comes first)
M A I N TA I N I N G YO U R V E H I C L E
20,000 Miles
(32,000 km) or
2 Years
30,000 Miles
(48,000 km) or
3 Years
40,000 Miles
(64,000 km) or
4 Years
50,000 Miles
(80,000 km) or
5 Years
60,000 Miles
(96,000 km) or
6 Years
70,000 Miles
(112,000 km) or
7 Years
80,000 Miles
(128,000 km) or
8 Years
90,000 Miles
(144,000 km) or
9 Years
100,000 Miles
(160,000 km) or
10 Years
Maintenance Record
Odometer
Date
Signature, Authorized Service Center
M A I N TA I N I N G YO U R V E H I C L E
267
110,000 Miles
(176,000 km) or
11 Years
120,000 Miles
(192,000 km) or
12 Years
130,000 Miles
(208,000 km) or
13 Years
140,000 Miles
(224,000 km) or
14 Years
150,000 Miles
(240,000 km) or
15 Years
Odometer
Date
Signature, Authorized Service Center
M A I N TA I N I N G YO U R V E H I C L E
268
M A I N TA I N I N G YO U R V E H I C L E
FUSES
WARNING!
• When replacing a blown fuse, always use an appropriate replacement fuse with the same
amp rating as the original fuse. Never replace a fuse with another fuse of higher amp rating.
Never replace a blown fuse with metal wires or any other material. Do not place a fuse inside
a circuit breaker cavity or vice versa. Failure to use proper fuses may result in serious
personal injury, fire and/or property damage.
• Before replacing a fuse, make sure that the ignition is off and that all the other services are
switched off and/or disengaged.
• If the replaced fuse blows again, contact an authorized dealer.
• If a general protection fuse for safety systems (air bag system, braking system), power unit
systems (engine system, transmission system) or steering system blows, contact an authorized dealer.
Underhood Fuses
The Power Distribution Center is located in the engine compartment near the battery. This
center contains cartridge fuses, mini-fuses, micro-fuses, circuit breakers and relays. A label that
identifies each component is printed on the inside of the cover.
Before any procedure is done on the PDC, make sure engine is turned off.
Remove the cover by unlatching the two locks located at each side of the PDC cover, avoid the
usage of screw drivers or any other tool to remove the cover, since they may apply excessive force
and result in a broken/damaged part.
After service is done, secure the cover with its two locks.
Power Distribution Center
269
M A I N TA I N I N G YO U R V E H I C L E
270
Cavity
F06
Cartridge Fuse
–
Blade Fuse
–
F07
–
25 Amp Clear
F08
F09
F10
F11
F12
F13
F14
F15
F16
F17
–
–
–
–
–
–
–
40 Amp Green
–
30 Amp Pink
–
25 Amp Clear
–
–
5 Amp Tan
10 Amp Red
10 Amp Red
–
20 Amp Yellow
–
F18
40 Amp Green
–
F19
25 Amp Clear
–
F20
–
10 Amp Red
F21
25 Amp Clear
–
F22
F23
F24
–
–
–
–
–
20 Amp Yellow
F25A
–
10 Amp Red
F25B
–
10 Amp Red
F26
40 Amp Green
–
F27
25 Amp Clear
–
F28A
–
10 Amp Red
F28B
–
10 Amp Red
F29
F30A
F30B
F31
F32
–
–
–
–
20 Amp Blue
–
15 Amp Blue
15 Amp Blue
–
–
Description
Not Used
Ignition Coil/
Fuel Injector
Not Used
Amplifier/ANC
Not Used
Not Used
Battery Sensor (IBS)
ECM (ESS Only)
ECM
CBC / Power Locks
ECM
Starter
CBC Feed #2
(Exterior Lights #1)
2nd Row Folding Seats
Solenoid LT
A/C Compressor
Clutch
2nd Row Folding Seat
Solenoid RT
Not Used
Not used
RR Wiper
HANDSFREE LT &
RT RR Door release
mod
Active Grill Shutter/
PWR Mirror
Front HVAC Blower
Motor
RR Slide Door
Module-RT
Diagnostic Report
USB + AUX PORT /
Video USB Port
Not Used
Media HUB 1&2
PWR LUMBAR SW
Not Used
ECM
M A I N TA I N I N G YO U R V E H I C L E
Cavity
Cartridge Fuse
Blade Fuse
F33
30 Amp Pink
–
F34
25 Amp Clear
–
F35
25 Amp Clear
–
F36
–
–
F37
40 Amp Green
–
F38
F39
F40
F41
F42
F43
60 Amp Yellow
25 Amp Clear
–
–
40 Amp Green
–
–
–
–
–
–
20 Amp Yellow
F44
30 Amp Pink
–
F45
F46
30 Amp Pink
30 Amp Pink
–
–
F47
30 Amp Pink
–
F48
–
–
F49
25 Amp Clear
–
F50
F51
F52
F53
F54
25 Amp Clear
30 Amp Pink
30 Amp Pink
–
40 Amp Green
–
–
–
–
–
F55A
–
15 Amp Blue
F55B
–
15 Amp Blue
F56A
–
10 Amp Red
F56B
F57
–
–
10 Amp Red
–
Description
Power Liftgate Module
RR Door Module-LT
Sunroof Control
Module
Not Used
CBC Feed #4
(Exterior Lighting #2)
Vacuum Cleaner
Rear Blower Motor
Not Used
Not Used
Folding Seat Module
Fuel Pump Motor
CBC Feed #1 (Interior
Lights)
Power Inverter
Driver Door Module
Passenger Door
Module
Not Used
RR Sliding Door
Module-LT
RR Door Module-RT
Front Wiper
Brake Vacuum Pump
Not Used
ESP-ECU And Valves
Radio Frequency
HUB/ Keyless ignition
system (KIN) /
(Electronic Steering
Lock-BUX ONLY)
DVD / Video Routing
Module (VRM
Front and Rear HVAC
Control Module /
Occupant Classification Module (OCM)/
Electronic Steering
Lock (ESL)
ESP/ESC
Not Used
271
M A I N TA I N I N G YO U R V E H I C L E
272
Cavity
F58
Cartridge Fuse
–
Blade Fuse
–
F59
30 Amp Pink
–
F60
–
20 Amp Yellow
F61
–
20 Amp Yellow
F62
–
–
F63
–
20 Amp Yellow
F64
F65
–
–
15 Amp Blue
–
F66
–
15 Amp Blue
F67
–
10 Amp Red
F68
F69
F70
F71
–
–
–
–
–
–
–
20 Amp Yellow
F72
–
10 Amp Red
F73
F74
30 Amp Pink
20 Amp Blue
–
–
F75
–
5 Amp Tan
F76
–
20 Amp Yellow
F77A
–
10 Amp Red
F77B
–
10 Amp Red
Description
Not Used
Trailer Tow Receptacle
— If Equipped
Rear Cargo APO
Trailer Tow Right
Stop/Turn — If
Equipped
Not Used
Trailer Tow Left Stop/
Turn — If Equipped
RT HID Headlamp
Not Used
Instrument Panel
Cluster (IPC)
Haptic Lane Feedback
Module (HALF) /
Parktronics System
(PTS)/Drivers Assist
System Module
(DASM)
Not Used
Not Used
Not Used
Horn
Heated Mirrors – If
Equipped
Rear Defroster (EBL)
Trailer Tow Backup
Overhead Console /
RR ISC
Uconnect/DCSD/
Telematics
RR Entertainment
Screen 1 & 2/Media
HUB 1 & 2/3rd Row
USB Charge Only/
2nd Row USB Charge
Only/Vaccum Cleaner
SW/3rd Row Recline
ST SW/LT & RT Stow
N Go SW/LT & RT
Sliding Door SW
Backlight
Rain Sensor/Sunroof
/CRVMM
M A I N TA I N I N G YO U R V E H I C L E
Cavity
Cartridge Fuse
Blade Fuse
F78A
–
15 Amp Blue
F78B
–
15 Amp Blue
F79
–
10 Amp Red
F80
F81
F82
–
–
–
–
–
–
20 Amp Blue
–
30 Amp Pink
–
F84
F85
F86
F87
F88
F89
F90
–
–
–
–
–
–
–
–
20 Amp Yellow
–
–
20 Amp Yellow
20 Amp Yellow
–
F91
–
15 Amp Blue
F92
F93
F94
–
–
40 Amp Green
5 Amp Tan
–
–
F95A
–
10 Amp Red
F95B
–
10 Amp Red
F96
–
10 Amp Red
F97
–
10 Amp Red
F98
–
15 Amp Blue
F99
30 Amp Pink
–
F100A
–
10 Amp Red
F83
Description
Transmission control
Module (TCM)/
E-Shifter
Instrument Cluster
ICS/Front And Rear
HVAC/ SCCM/ EPB
Not Used
Not Used
Not Used
TT Park Lights —
If Equipped
Headlamp Washer
Pump — If Equipped
Not Used
Cigar Lighter
Not Used
Not Used
Front Heated Seats
Rear Heated Seats
Not Used
Front Ventilated
Seats/Heated Steering
Wheel
Security Gateway
Not Used
ESC Motor Pump
USB Charge Port —
ACC RUN
Selectable Fuse
Location
Occupant Restraint
Controller (ORC)
(Airbag)
Occupant Restraint
Controller (ORC)
(Airbag)
Left HID Headlamp
Electrical Brake
Module/Trailer Tow —
If Equipped
AHLM
273
M A I N TA I N I N G YO U R V E H I C L E
Cavity
Cartridge Fuse
Blade Fuse
F100B
–
10 Amp Red
CB1
CB2
Circuit Breakers
25 Amp
25 Amp *
CB3
25 Amp
Description
Rear Camera/LBSS/
RBSS/CVPM/
Humidity Sensor/In
Vehicle Temperature
Sensor
Power Seats (Driver)
Power Seats (Pass)
FRT PWR Window
W/O Door Nodes +
RR PWR Window
Lockout
* 30A mini fuse is substituted for 25A Circuit Breaker.
274
Cavity
F06
F07
F08
F09
F10
F11
F12
F13
F14
F16
F20
F22
F23
F24
Blade Fuse
–
25 Amp Clear
–
25 Amp Clear
–
–
5 Amp Tan
10 Amp Red
10 Amp Red
20 Amp Yellow
10 Amp Red
–
–
20 Amp Yellow
F25A
10 Amp Red
F25B
10 Amp Red
F28A
10 Amp Red
F28B
10 Amp Red
F29
F30A
F30B
F31
F36
–
15 Amp Blue
15 Amp Blue
–
–
Description
Not Used
Ignition Coil/Fuel Injector
Not Used
Amplifier/ANC
Not Used
Not Used
Battery Sensor (IBS)
ECM (ESS Only)
ECM
ECM
A/C Compressor Clutch
Not Used
Not used
RR Wiper
HANDSFREE LT & RT RR
Door release mod
Active Grill Shutter/
PWR Mirror
Diagnostic Report
USB + AUX PORT /
Video USB Port
Not Used
Media HUB 1&2
PWR LUMBAR SW
Not Used
Not Used
M A I N TA I N I N G YO U R V E H I C L E
Cavity
F40
F41
F43
F48
F53
Blade Fuse
–
–
20 Amp Yellow
–
–
F55A
15 Amp Blue
F55B
15 Amp Blue
F56A
10 Amp Red
F56B
F57
F58
F60
10 Amp Red
–
–
20 Amp Yellow
F61
20 Amp Yellow
F62
–
F63
20 Amp Yellow
F64
F65
F66
15 Amp Blue
–
15 Amp Blue
F67
10 Amp Red
F68
F69
F70
F71
F72
F75
F76
–
–
–
20 Amp Yellow
10 Amp Red
5 Amp Tan
20 Amp Yellow
Description
Not Used
Not Used
Fuel Pump Motor
Not Used
Not Used
Radio Frequency HUB/
Keyless ignition system (KIN) /
(Electronic Steering Lock-BUX
ONLY)
DVD / Video Routing Module
(VRM
Front and Rear HVAC Control
Module / Occupant Classification Module (OCM)/
Electronic Steering Lock (ESL)
ESP/ESC
Not Used
Not Used
Rear Cargo APO
Trailer Tow Right Stop/Turn —
If Equipped
Not Used
Trailer Tow Left Stop/Turn —
If Equipped
RT HID Headlamp
Not Used
Instrument Panel Cluster (IPC)
Haptic Lane Feedback Module
(HALF) / Parktronics System
(PTS)/Drivers Assist System
Module (DASM)
Not Used
Not Used
Not Used
Horn
Heated Mirrors – If Equipped
Overhead Console / RR ISC
Uconnect/DCSD/Telematics
275
M A I N TA I N I N G YO U R V E H I C L E
276
Cavity
Blade Fuse
F77A
10 Amp Red
F77B
10 Amp Red
F78A
15 Amp Blue
F78B
15 Amp Blue
F79
10 Amp Red
F80
F81
F82
F84
F85
F86
F87
F88
F89
F90
–
–
–
–
20 Amp Yellow
–
–
20 Amp Yellow
20 Amp Yellow
–
F91
15 Amp Blue
F92
F93
5 Amp Tan
–
F95A
10 Amp Red
F95B
10 Amp Red
F96
10 Amp Red
F97
10 Amp Red
F98
F100A
15 Amp Blue
10 Amp Red
F100B
10 Amp Red
Description
RR Entertainment Screen 1 &
2/Media HUB 1 & 2/3rd Row
USB Charge Only/2nd Row
USB Charge Only/Vaccum
Cleaner SW/3rd Row Recline
ST SW/LT & RT Stow N Go
SW/LT & RT Sliding Door SW
Backlight
Rain Sensor/Sunroof
/CRVMM
Transmission control Module
(TCM)/ E-Shifter
Instrument Cluster
ICS/Front And Rear HVAC/
SCCM/ EPB
Not Used
Not Used
Not Used
Not Used
Cigar Lighter
Not Used
Not Used
Front Heated Seats
Rear Heated Seats
Not Used
Front Ventilated Seats/Heated
Steering Wheel
Security Gateway
Not Used
USB Charge Port — ACC
RUN
Selectable Fuse Location
Occupant Restraint Controller
(ORC) (Airbag)
Occupant Restraint Controller
(ORC) (Airbag)
Left HID Headlamp
AHLM
Rear Camera/LBSS/RBSS/
CVPM/Humidity Sensor/In
Vehicle Temperature Sensor
M A I N TA I N I N G YO U R V E H I C L E
Cavity
F15
F17
Cartridge Fuse
40 Amp Green
30 Amp Pink
F18
40 Amp Green
F19
25 Amp Clear
F20
–
F21
25 Amp Clear
F26
F27
F32
F33
F34
F35
40 Amp Green
25 Amp Clear
20 Amp Blue
30 Amp Pink
25 Amp Clear
25 Amp Clear
F37
40 Amp Green
F38
F39
F42
F44
F45
F46
F47
F49
F50
F51
F52
F53
F54
F57
F58
60 Amp Yellow
25 Amp Clear
40 Amp Green
30 Amp Pink
30 Amp Pink
30 Amp Pink
30 Amp Pink
25 Amp Clear
25 Amp Clear
30 Amp Pink
30 Amp Pink
–
40 Amp Green
–
–
F59
30 Amp Pink
F73
F74
30 Amp Pink
20 Amp Blue
Description
CBC / Power Locks
Starter
CBC Feed #2
(Exterior Lights #1)
2nd Row Folding
Seats Solenoid LT
A/C Compressor Clutch
2nd Row Folding Seat
Solenoid RT
Front HVAC Blower Motor
RR Slide Door Module-RT
ECM
Power Liftgate Module
RR Door Module-LT
Sunroof Control Module
CBC Feed #4 (Exterior Lighting #2)
Vacuum Cleaner
Rear Blower Motor
Folding Seat Module
CBC Feed #1 (Interior Lights)
Power Inverter
Driver Door Module
Passenger Door Module
RR Sliding Door Module-LT
RR Door Module-RT
Front Wiper
Brake Vacuum Pump
Not Used
ESP-ECU And Valves
Not Used
Not Used
Trailer Tow Receptacle —
If Equipped
Rear Defroster (EBL)
Trailer Tow Backup
277
M A I N TA I N I N G YO U R V E H I C L E
Cavity
F83
Cartridge Fuse
20 Amp Blue
30 Amp Pink
F94
40 Amp Green
F99
30 Amp Pink
CB1
CB2
Circuit Breakers
25 Amp
25 Amp *
CB3
25 Amp
Description
TT Park Lights — If Equipped
Headlamp Washer Pump —
If Equipped
ESC Motor Pump
Electrical Brake Module/Trailer
Tow — If Equipped
Power Seats (Driver)
Power Seats (Pass)
FRT PWR Window
W/O Door Nodes +
RR PWR Window
Lockout
ADDING FUEL
There is no fuel filler cap. Two flapper doors inside the pipe seal the system.
WARNING!
• Never have any smoking materials lit in or near the vehicle when the fuel door is open or the
tank is being filled.
• Never add fuel when the engine is running. This is in violation of most state and federal fire
regulations and may cause the MIL to turn on.
• A fire may result if gasoline is pumped into a portable container that is inside of a vehicle.
You could be burned. Always place gas containers on the ground while filling.
CAUTION!
To avoid fuel spillage and overfilling, do not “top off” the fuel tank after filling.
1. Put the vehicle in park and switch the ignition off.
2. Push the center-rear edge of the fuel filler door (3 o'clock position) and release to open.
3. Insert the fuel nozzle fully into the filler pipe, the nozzle opens and holds both flapper doors
while refueling.
4. When the fuel nozzle “clicks” or shuts off, the fuel tank is full.
5. Keep the nozzle in the filler for five seconds after nozzle clicks to allow fuel to drain from the
nozzle.
6. Remove the fuel filler nozzle.
278
M A I N TA I N I N G YO U R V E H I C L E
7. To close the fuel filler door, push the center-rear edge (3 o’clock position) of the fuel filler door
and then release. The fuel filler door will latch closed.
NOTE:
• In certain cold conditions, ice may prevent
the fuel filler door from opening. If this occurs, lightly push on the fuel filler door
around the perimeter to break the ice build
up.
• Take care to open both flappers with the
funnel to avoid spills.
Materials Added To Fuel
Designated TOP TIER Detergent Gasoline
contains a higher level of detergents to further
aide in minimizing engine and fuel system deFuel Filler Cap Latch
posits. When available, the usage of Top Tier
Detergent gasoline is recommended. Visit
www.toptiergas.com for a list of TOP TIER Detergent Gasoline Retailers.
Indiscriminate use of fuel system cleaning agents should be avoided.
Many of these materials intended for gum and varnish removal may
contain active solvents or similar ingredients. These can harm fuel system gasket and diaphragm
materials.
279
M A I N TA I N I N G YO U R V E H I C L E
TIRE SAFETY INFORMATION
Tire Markings
NOTE:
• P (Passenger) — Metric tire sizing is based
on U.S. design standards. P-Metric tires
have the letter “P” molded into the sidewall
preceding the size designation. Example:
P215/65R15 95H.
• European — Metric tire sizing is based on
European design standards. Tires designed
to this standard have the tire size molded
into the sidewall beginning with the section
width. The letter "P" is absent from this tire
size designation. Example: 215/65R15 96H.
• LT (Light Truck) — Metric tire sizing is
based on U.S. design standards. The size
designation for LT-Metric tires is the same
as for P-Metric tires except for the letters
“LT” that are molded into the sidewall preceding the size designation. Example:
LT235/85R16.
1 — U.S. DOT
Safety Standards
Code (TIN)
2 — Size Designation
3 — Service Description
4 — Maximum
Load
5 — Maximum
Pressure
6 — Treadwear,
Traction
and
Temperature
Grades
• Temporary spare tires are designed for temporary emergency use only. Temporary high
pressure compact spare tires have the letter “T” or “S” molded into the sidewall preceding the
size designation. Example: T145/80D18 103M.
• High flotation tire sizing is based on U.S. design standards and it begins with the tire diameter
molded into the sidewall. Example: 31x10.5 R15 LT.
280
M A I N TA I N I N G YO U R V E H I C L E
Tire Sizing Chart
EXAMPLE:
Example Size Designation: P215/65R15XL 95H, 215/65R15 96H, LT235/85R16C, T145/
80D18 103M, 31x10.5 R15 LT
P = Passenger car tire size based on U.S. design standards, or
"....blank...." = Passenger car tire based on European design standards, or
LT = Light truck tire based on U.S. design standards, or
T or S = Temporary spare tire or
31 = Overall diameter in inches (in)
215, 235, 145 = Section width in millimeters (mm)
65, 85, 80 = Aspect ratio in percent (%)
– Ratio of section height to section width of tire, or
10.5 = Section width in inches (in)
R = Construction code
– "R" means radial construction, or
– "D" means diagonal or bias construction
15, 16, 18 = Rim diameter in inches (in)
Service Description:
95 = Load Index
– A numerical code associated with the maximum load a tire can carry
H = Speed Symbol
– A symbol indicating the range of speeds at which a tire can carry a load corresponding to its
load index under certain operating conditions
– The maximum speed corresponding to the speed symbol should only be achieved under
specified operating conditions (i.e., tire pressure, vehicle loading, road conditions, and posted
speed limits)
Load Identification:
Absence of the following load identification symbols on the sidewall of the tire indicates a Standard Load (SL) tire:
• XL = Extra load (or reinforced) tire, or
• LL = Light load tire or
• C, D, E, F, G = Load range associated with the maximum load a tire can carry at a specified
pressure
Maximum Load – Maximum load indicates the maximum load this tire is designed to carry
Maximum Pressure – Maximum pressure indicates the maximum permissible cold tire inflation
pressure for this tire
281
M A I N TA I N I N G YO U R V E H I C L E
Tire Identification Number (TIN)
The TIN may be found on one or both sides of the tire; however, the date code may only be on
one side. Tires with white sidewalls will have the full TIN, including the date code, located on the
white sidewall side of the tire. Look for the TIN on the outboard side of black sidewall tires as
mounted on the vehicle. If the TIN is not found on the outboard side, then you will find it on the
inboard side of the tire.
EXAMPLE:
DOT MA L9 ABCD 0301
DOT = Department of Transportation
This symbol certifies that the tire is in compliance with the U.S. Department of Transportation
tire safety standards and is approved for highway use
MA = Code representing the tire manufacturing location (two digits)
•
L9 = Code representing the tire size (two digits)
ABCD = Code used by the tire manufacturer (one to four digits)
03 = Number representing the week in which the tire was manufactured (two digits)
• 03 means the 3rd week
01 = Number representing the year in which the tire was manufactured (two digits)
• 01 means the year 2001
• Prior to July 2000, tire manufacturers were only required to have one number to represent the
year in which the tire was manufactured. Example: 031 could represent the 3rd week of 1981 or
1991
Tire Terminology And Definitions
Term
B-Pillar
Cold Tire Inflation Pressure
Maximum Inflation Pressure
Recommended Cold Tire Inflation
Pressure
Tire Placard
282
Definition
The vehicle B-Pillar is the structural member of the body
located behind the front door.
Cold tire inflation pressure is defined as the tire pressure
after the vehicle has not been driven for at least three
hours, or driven less than 1 mile (1.6 km) after sitting for a
minimum of three hours. Inflation pressure is measured in
units of PSI (pounds per square inch) or kPa (kilopascals).
The maximum inflation pressure is the maximum permissible cold tire inflation pressure for this tire. The maximum inflation pressure is molded into the sidewall.
Vehicle manufacturer's recommended cold tire inflation
pressure as shown on the tire placard.
A label permanently attached to the vehicle describing
the vehicle’s loading capacity, the original equipment tire
sizes and the recommended cold tire inflation pressures.
M A I N TA I N I N G YO U R V E H I C L E
Tire Loading And Tire Pressure
Tire And Loading Information Placard Location
NOTE:
The proper cold tire inflation pressure is listed on the driver’s side B-Pillar or the rear edge of the
driver's side door.
Check the inflation pressure of each tire, including the spare tire (if equipped), at least monthly
and inflate to the recommended pressure for your vehicle.
NOTE:
Refer to the Owner's Manual, or the Tire Information Supplement, located in your Owner’s
Information kit for more information regarding
tire warnings and instructions.
Example Tire Placard Location (Door)
Example Tire Placard Location (B-Pillar)
283
M A I N TA I N I N G YO U R V E H I C L E
WARNING!
• Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle
handling, and increase your stopping distance. Use tires of the recommended load capacity
for your vehicle. Never overload them.
• Improperly inflated tires are dangerous and can cause collisions.
• Under-inflation increases tire flexing and can result in over-heating and tire failure.
• Over-inflation reduces a tire’s ability to cushion shock. Objects on the road and chuck holes
can cause damage that results in tire failure.
• Unequal tire pressures can cause steering problems. You could lose control of your vehicle.
• Unequal tire pressures from one side of the vehicle to the other can cause the vehicle to drift
to the right or left.
• Over-inflated or under-inflated tires can affect vehicle handling and can fail suddenly,
resulting in loss of vehicle control.
• Always drive with each tire inflated to the recommended cold tire inflation pressure.
Tire And Loading Information Placard
This placard tells you important information
about the:
1. Number of people that can be carried in the
vehicle.
2. Total weight your vehicle can carry.
3. Tire size designed for your vehicle.
4. Cold tire inflation pressures for the front,
rear, and spare tires.
Tire And Loading Information Placard
Loading
The vehicle maximum load on the tire must not exceed the load carrying capacity of the tire on
your vehicle. You will not exceed the tire's load carrying capacity if you adhere to the loading
conditions, tire size, and cold tire inflation pressures specified on the Tire and Loading Information placard in “Vehicle Loading” in the “Starting And Operating” section of the Owner’s Manual,
or the Tire Information Supplement, located in your Owner’s Information kit.
NOTE:
Under a maximum loaded vehicle condition, gross axle weight ratings (GAWRs) for the front and
rear axles must not be exceeded. Refer to “Vehicle Loading” in “Starting And Operating” in the
Owner’s Manual, or the Tire Information Supplement, located in your Owner’s Information kit for
further information on GAWRs, vehicle loading, and trailer towing.
To determine the maximum loading conditions of your vehicle, locate the statement “The
combined weight of occupants and cargo should never exceed XXX kg or XXX lbs” on the Tire
and Loading Information placard. The combined weight of occupants, cargo/luggage and trailer
tongue weight (if applicable) should never exceed the weight referenced here.
284
M A I N TA I N I N G YO U R V E H I C L E
Steps For Determining Correct Load Limit—
(1) Locate the statement “The combined weight of occupants and cargo should
never exceed XXX kg or XXX lbs.” on your vehicle's placard.
(2) Determine the combined weight of the driver and passengers that will be riding
in your vehicle.
(3) Subtract the combined weight of the driver and passengers from XXX kg or
XXX lbs.
(4) The resulting figure equals the available amount of cargo and luggage load
capacity. For example, if “XXX” amount equals 1400 lbs. and there will be five
150 lb passengers in your vehicle, the amount of available cargo and luggage load
capacity is 650 lbs. (1400-750 (5x150) = 650 lbs.)
(5) Determine the combined weight of luggage and cargo being loaded on the
vehicle. That weight may not safely exceed the available cargo and luggage load
capacity calculated in Step 4.
(6) If your vehicle will be towing a trailer, load from your trailer will be transferred to
your vehicle. Consult this manual to determine how this reduces the available
cargo and luggage load capacity of your vehicle.
285
M A I N TA I N I N G YO U R V E H I C L E
Metric Example For Load Limit
For example, if “XXX” amount equals 635 kg, and there will be five 68 kg passengers in your
vehicle, the amount of available cargo and luggage load capacity is 295 kg (635-340 (5x68) =
295 kg) as shown in step 4.
NOTE:
• If your vehicle will be towing a trailer, load from your trailer will be transferred to your vehicle.
The following table shows examples on how to calculate total load, cargo/luggage, and towing
capacities of your vehicle with varying seating configurations and number and size of occupants. This table is for illustration purposes only and may not be accurate for the seating and
load carry capacity of your vehicle.
• For the following example, the combined weight of occupants and cargo should never exceed
865 lbs (392 kg).
WARNING!
Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your
vehicle. Never overload them.
286
M A I N TA I N I N G YO U R V E H I C L E
TIRES — GENERAL INFORMATION
Tire Pressure
Proper tire inflation pressure is essential to the safe and satisfactory operation of your vehicle.
Four primary areas are affected by improper tire pressure:
• Safety and Vehicle Stability
• Economy
• Tread Wear
• Ride Comfort
Safety
WARNING!
• Improperly inflated tires are dangerous and can cause collisions.
• Underinflation increases tire flexing and can result in overheating and tire failure.
• Overinflation reduces a tire's ability to cushion shock. Objects on the road and chuckholes
can cause damage that result in tire failure.
• Overinflated or underinflated tires can affect vehicle handling and can fail suddenly,
resulting in loss of vehicle control.
• Unequal tire pressures can cause steering problems. You could lose control of your vehicle.
• Unequal tire pressures from one side of the vehicle to the other can cause the vehicle to drift
to the right or left.
• Always drive with each tire inflated to the recommended cold tire inflation pressure.
Both under-inflation and over-inflation affect the stability of the vehicle and can produce a
feeling of sluggish response or over responsiveness in the steering.
NOTE:
• Unequal tire pressures from side to side may cause erratic and unpredictable steering
response.
• Unequal tire pressure from side to side may cause the vehicle to drift left or right.
Fuel Economy
Underinflated tires will increase tire rolling resistance resulting in higher fuel consumption.
Tread Wear
Improper cold tire inflation pressures can cause abnormal wear patterns and reduced tread life,
resulting in the need for earlier tire replacement.
Ride Comfort And Vehicle Stability
Proper tire inflation contributes to a comfortable ride. Over-inflation produces a jarring and
uncomfortable ride.
287
M A I N TA I N I N G YO U R V E H I C L E
Tire Inflation Pressures
The proper cold tire inflation pressure is listed on the driver's side B-Pillar or rear edge of the
driver's side door.
At least once a month:
• Check and adjust tire pressure with a good quality pocket-type pressure gauge. Do not make
a visual judgement when determining proper inflation. Tires may look properly inflated even
when they are under-inflated.
• Inspect tires for signs of tire wear or visible damage.
CAUTION!
After inspecting or adjusting the tire pressure, always reinstall the valve stem cap. This will
prevent moisture and dirt from entering the valve stem, which could damage the valve stem.
Inflation pressures specified on the placard are always “cold tire inflation pressure”. Cold tire
inflation pressure is defined as the tire pressure after the vehicle has not been driven for at least
three hours, or driven less than 1 mile (1.6 km) after sitting for a minimum of three hours. The cold
tire inflation pressure must not exceed the maximum inflation pressure molded into the tire
sidewall.
Check tire pressures more often if subject to a wide range of outdoor temperatures, as tire
pressures vary with temperature changes.
Tire pressures change by approximately 1 psi (7 kPa) per 12°F (7°C) of air temperature change.
Keep this in mind when checking tire pressure inside a garage, especially in the Winter.
Example: If garage temperature = 68°F (20°C) and the outside temperature = 32°F (0°C) then
the cold tire inflation pressure should be increased by 3 psi (21 kPa), which equals 1 psi (7 kPa) for
every 12°F (7°C) for this outside temperature condition.
Tire pressure may increase from 2 to 6 psi (13 to 40 kPa) during operation. DO NOT reduce this
normal pressure build up or your tire pressure will be too low.
Tire Pressures For High Speed Operation
The manufacturer advocates driving at safe speeds and within posted speed limits. Where speed
limits or conditions are such that the vehicle can be driven at high speeds, maintaining correct tire
inflation pressure is very important. Increased tire pressure and reduced vehicle loading may be
required for high-speed vehicle operation. Refer to your authorized tire dealer or original
equipment vehicle dealer for recommended safe operating speeds, loading and cold tire inflation
pressures.
WARNING!
High speed driving with your vehicle under maximum load is dangerous. The added strain on
your tires could cause them to fail. You could have a serious collision. Do not drive a vehicle
loaded to the maximum capacity at continuous speeds above 75 mph (120 km/h).
288
M A I N TA I N I N G YO U R V E H I C L E
Radial Ply Tires
WARNING!
Combining radial ply tires with other types of tires on your vehicle will cause your vehicle to
handle poorly. The instability could cause a collision. Always use radial ply tires in sets of four.
Never combine them with other types of tires.
Tire Repair
If your tire becomes damaged, it may be repaired if it meets the following criteria:
• The tire has not been driven on when flat.
• The damage is only on the tread section of your tire (sidewall damage is not repairable).
• The puncture is no greater than a 1/4 of an inch (6 mm).
Consult an authorized tire dealer for tire repairs and additional information.
Damaged Run Flat tires, or Run Flat tires that have experienced a loss of pressure should be
replaced immediately with another Run Flat tire of identical size and service description (Load
Index and Speed Symbol).
Tire Types
All Season Tires — If Equipped
All season tires provide traction for all seasons (Spring, Summer, Fall and Winter). Traction levels
may vary between different all season tires. All season tires can be identified by the M+S, M&S,
M/S or MS designation on the tire sidewall. Use all season tires only in sets of four; failure to do
so may adversely affect the safety and handling of your vehicle.
Summer Or Three Season Tires — If Equipped
Summer tires provide traction in both wet and dry conditions, and are not intended to be driven
in snow or on ice. If your vehicle is equipped with Summer tires, be aware these tires are not
designed for Winter or cold driving conditions. Install Winter tires on your vehicle when ambient
temperatures are less than 40°F (5°C) or if roads are covered with ice or snow. For more
information, contact an authorized dealer.
Summer tires do not contain the all season designation or mountain/snowflake symbol on the tire
sidewall. Use Summer tires only in sets of four; failure to do so may adversely affect the safety and
handling of your vehicle.
WARNING!
Do not use Summer tires in snow/ice conditions. You could lose vehicle control, resulting in
severe injury or death. Driving too fast for conditions also creates the possibility of loss of
vehicle control.
289
M A I N TA I N I N G YO U R V E H I C L E
Snow Tires
Some areas of the country require the use of snow tires during the Winter. Snow tires can be
identified by a “mountain/snowflake” symbol on the tire sidewall.
If you need snow tires, select tires equivalent in size and type to the original
equipment tires. Use snow tires only in sets of four; failure to do so may
adversely affect the safety and handling of your vehicle.
Snow tires generally have lower speed ratings than what was originally
equipped with your vehicle and should not be operated at sustained speeds
over 75 mph (120 km/h). For speeds above 75 mph (120 km/h), refer to
original equipment or an authorized tire dealer for recommended safe operating speeds, loading
and cold tire inflation pressures.
While studded tires improve performance on ice, skid and traction capability on wet or dry
surfaces may be poorer than that of non-studded tires. Some states prohibit studded tires;
therefore, local laws should be checked before using these tire types.
Run Flat Tires — If Equipped
Run Flat tires allow you the capability to drive 50 miles (80 km) at 50 mph (80 km/h) after a rapid
loss of inflation pressure. This rapid loss of inflation is referred to as the Run Flat mode. A Run Flat
mode occurs when the tire inflation pressure is of/or below 14 psi (96 kPa). Once a Run Flat tire
reaches the Run Flat mode, it has limited driving capabilities and needs to be replaced immediately. A Run Flat tire is not repairable.
It is not recommended to drive a vehicle loaded at full capacity, or to tow a trailer while a tire is in
the Run Flat mode.
See the tire pressure monitoring section for more information.
Spare Tires — If Equipped
NOTE:
For vehicles equipped with Tire Service Kit instead of a spare tire, please refer to the “Tire Service
Kit” section located in your Owner’s Information kit for further information.
CAUTION!
Because of the reduced ground clearance, do not take your vehicle through an automatic car
wash with a compact or limited use temporary spare installed. Damage to the vehicle may
result.
Spare Tire Matching Original Equipped Tire And Wheel — If Equipped
Your vehicle may be equipped with a spare tire and wheel equivalent in look and function to the
original equipment tire and wheel found on the front or rear axle of your vehicle. This spare tire
may be used in the tire rotation for your vehicle. If your vehicle has this option, refer to an
authorized tire dealer for the recommended tire rotation pattern.
290
M A I N TA I N I N G YO U R V E H I C L E
Compact Spare Tire — If Equipped
The compact spare is for temporary emergency use only. You can identify if your vehicle is
equipped with a compact spare by looking at the spare tire description on the Tire and Loading
Information Placard located on the driver’s side door opening or on the sidewall of the tire.
Compact spare tire descriptions begin with the letter “T” or “S” preceding the size designation.
Example: T145/80D18 103M.
T, S = Temporary Spare Tire
Since this tire has limited tread life, the original equipment tire should be repaired (or replaced)
and reinstalled on your vehicle at the first opportunity.
Do not install a wheel cover or attempt to mount a conventional tire on the compact spare wheel,
since the wheel is designed specifically for the compact spare tire. Do not install more than one
compact spare tire and wheel on the vehicle at any given time.
WARNING!
Compact and Collapsible spares are for temporary emergency use only. With these spares, do
not drive more than 50 mph (80 km/h). Temporary use spares have limited tread life. When
the tread is worn to the tread wear indicators, the temporary use spare tire needs to be
replaced. Be sure to follow the warnings, which apply to your spare. Failure to do so could
result in spare tire failure and loss of vehicle control.
Collapsible Spare Tire — If Equipped
The collapsible spare is for temporary emergency use only. You can identify if your vehicle is
equipped with a collapsible spare by looking at the spare tire description on the Tire and Loading
Information Placard located on the driver’s side door opening or on the sidewall of the tire.
Collapsible spare tire description example: 165/80-17 101P.
Since this tire has limited tread life, the original equipment tire should be repaired (or replaced)
and reinstalled on your vehicle at the first opportunity.
Inflate collapsible tire only after the wheel is properly installed to the vehicle. Inflate the
collapsible tire using the electric air pump before lowering the vehicle.
Do not install a wheel cover or attempt to mount a conventional tire on the collapsible spare
wheel, since the wheel is designed specifically for the collapsible spare tire.
WARNING!
Compact and Collapsible spares are for temporary emergency use only. With these spares, do
not drive more than 50 mph (80 km/h). Temporary use spares have limited tread life. When
the tread is worn to the tread wear indicators, the temporary use spare tire needs to be
replaced. Be sure to follow the warnings, which apply to your spare. Failure to do so could
result in spare tire failure and loss of vehicle control.
291
M A I N TA I N I N G YO U R V E H I C L E
Full Size Spare — If Equipped
The full size spare is for temporary emergency use only. This tire may look like the originally
equipped tire on the front or rear axle of your vehicle, but it is not. This spare tire may have limited
tread life. When the tread is worn to the tread wear indicators, the temporary use full size spare
tire needs to be replaced. Since it is not the same as your original equipment tire, replace (or
repair) the original equipment tire and reinstall on the vehicle at the first opportunity.
Limited Use Spare — If Equipped
The limited use spare tire is for temporary emergency use only. This tire is identified by a label
located on the limited use spare wheel. This label contains the driving limitations for this spare.
This tire may look like the original equipped tire on the front or rear axle of your vehicle, but it is
not. Installation of this limited use spare tire affects vehicle handling. Since it is not the same as
your original equipment tire, replace (or repair) the original equipment tire and reinstall on the
vehicle at the first opportunity.
WARNING!
Limited use spares are for emergency use only. Installation of this limited use spare tire affects
vehicle handling. With this tire, do not drive more than the speed listed on the limit use spare
wheel. Keep inflated to the cold tire inflation pressures listed on your Tire and Loading
Information Placard located on the driver’s side B-Pillar or the rear edge of the driver’s side
door. Replace (or repair) the original equipment tire at the first opportunity and reinstall it on
your vehicle. Failure to do so could result in loss of vehicle control.
Tire Spinning
When stuck in mud, sand, snow, or ice conditions, do not spin your vehicle's wheels above 30 mph
(48 km/h) or for longer than 30 seconds continuously without stopping.
Refer to “Freeing A Stuck Vehicle” in “What To Do In Emergencies” for further information.
WARNING!
Fast spinning tires can be dangerous. Forces generated by excessive wheel speeds may cause
tire damage or failure. A tire could explode and injure someone. Do not spin your vehicle's
wheels faster than 30 mph (48 km/h) for more than 30 seconds continuously when you are
stuck, and do not let anyone near a spinning wheel, no matter what the speed.
292
M A I N TA I N I N G YO U R V E H I C L E
Tread Wear Indicators
Tread wear indicators are in the original equipment tires to help you in determining when your
tires should be replaced.
These indicators are molded into the bottom
of the tread grooves. They will appear as bands
when the tread depth becomes a 1/16 of an inch
(1.6 mm). When the tread is worn to the tread
wear indicators, the tire should be replaced.
Refer to “Replacement Tires” in this section for
further information.
Life Of Tire
The service life of a tire is dependent upon
varying factors including, but not limited to:
Tire Tread
1 — Worn Tire
2 — New Tire
• Driving style.
• Tire pressure – Improper cold tire inflation pressures can cause uneven wear patterns to
develop across the tire tread. These abnormal wear patterns will reduce tread life, resulting in
the need for earlier tire replacement.
• Distance driven.
• Performance tires, tires with a speed rating of V or higher, and Summer tires typically have a
reduced tread life. Rotation of these tires per the vehicle maintenance schedule is highly
recommended.
WARNING!
Tires and the spare tire should be replaced after six years, regardless of the remaining tread.
Failure to follow this warning can result in sudden tire failure. You could lose control and have
a collision resulting in serious injury or death.
Keep dismounted tires in a cool, dry place with as little exposure to light as possible. Protect tires
from contact with oil, grease, and gasoline.
Replacement Tires
The tires on your new vehicle provide a balance of many characteristics. They should be
inspected regularly for wear and correct cold tire inflation pressures. The manufacturer strongly
recommends that you use tires equivalent to the originals in size, quality and performance when
replacement is needed. Refer to the paragraph on “Tread Wear Indicator” in this section. Refer to
the Tire and Loading Information placard or the Vehicle Certification Label for the size designation of your tire. The Load Index and Speed Symbol for your tire will be found on the original
equipment tire sidewall.
See the Tire Sizing Chart example found in the “Tire Safety Information” section of this manual
for more information relating to the Load Index and Speed Symbol of a tire.
293
M A I N TA I N I N G YO U R V E H I C L E
It is recommended to replace the two front tires or two rear tires as a pair. Replacing just one tire
can seriously affect your vehicle’s handling. If you ever replace a wheel, make sure that the wheel’s
specifications match those of the original wheels.
It is recommended you contact your authorized tire dealer or original equipment dealer with any
questions you may have on tire specifications or capability. Failure to use equivalent replacement
tires may adversely affect the safety, handling, and ride of your vehicle.
WARNING!
• Do not use a tire, wheel size or rating other than that specified for your vehicle. Some
combinations of unapproved tires and wheels may change suspension dimensions and
performance characteristics, resulting in changes to steering, handling, and braking of your
vehicle. This can cause unpredictable handling and stress to steering and suspension
components. You could lose control and have a collision resulting in serious injury or death.
Use only the tire and wheel sizes with load ratings approved for your vehicle.
• Never use a tire with a smaller load index or capacity, other than what was originally
equipped on your vehicle. Using a tire with a smaller load index could result in tire
overloading and failure. You could lose control and have a collision.
• Failure to equip your vehicle with tires having adequate speed capability can result in
sudden tire failure and loss of vehicle control.
CAUTION!
Replacing original tires with tires of a different size may result in false speedometer and
odometer readings.
Wheel And Wheel Trim Care
All wheels and wheel trim, especially aluminum and chrome plated wheels, should be cleaned
regularly using mild (neutral Ph) soap and water to maintain their luster and to prevent corrosion.
Wash wheels with the same soap solution recommended for the body of the vehicle.
Your wheels are susceptible to deterioration caused by salt, sodium chloride, magnesium chloride, calcium chloride, etc., and other road chemicals used to melt ice or control dust on dirt roads.
Use a soft cloth or sponge and mild soap to wipe away promptly. Do not use harsh chemicals or
a stiff brush. They can damage the wheel’s protective coating that helps keep them from
corroding and tarnishing.
NOTE:
Many aftermarket wheel cleaners contain strong acids or strong alkaline additives that can harm
the wheel surface.
294
M A I N TA I N I N G YO U R V E H I C L E
CAUTION!
Avoid products or automatic car washes that use acidic solutions or strong alkaline additives or
harsh brushes. Many aftermarket wheel cleaners and automatic car washes may damage the
wheel's protective finish. Such damage is not covered by the New Vehicle Limited Warranty.
Only car wash soap, Mopar Wheel Cleaner or equivalent is recommended.
When cleaning extremely dirty wheels including excessive brake dust, care must be taken in the
selection of tire and wheel cleaning chemicals and equipment to prevent damage to the wheels.
Mopar Wheel Treatment, Mopar Chrome Cleaner, or their equivalent is recommended or select
a non-abrasive, non-acidic cleaner for aluminum or chrome wheels. Do not use any products on
Dark Vapor or Black Satin Chrome Wheels. They will permanently damage this finish and such
damage is not covered by the New Vehicle Limited Warranty.
CAUTION!
Do not use scouring pads, steel wool, a bristle brush, metal polishes or oven cleaner. These
products may damage the wheel's protective finish. Such damage is not covered by the New
Vehicle Limited Warranty. Only car wash soap, Mopar Wheel Cleaner or equivalent is
recommended.
NOTE:
If you intend parking or storing your vehicle for an extended period after cleaning the wheels with
wheel cleaner, drive your vehicle for a few minutes before doing so. Driving the vehicle and
applying the brakes when stopping will reduce the risk of brake rotor corrosion.
Dark Vapor Or Black Satin Chrome Wheels
CAUTION!
If your vehicle is equipped with these specialty wheels, DO NOT USE wheel cleaners,
abrasives, or polishing compounds. They will permanently damage this finish and such
damage is not covered by the New Vehicle Limited Warranty. HAND WASH ONLY USING
MILD SOAP AND WATER WITH A SOFT CLOTH. Used on a regular basis; this is all that
is required to maintain this finish.
DEPARTMENT OF TRANSPORTATION
UNIFORM TIRE QUALITY GRADES
The following tire grading categories were established by the National Highway
Traffic Safety Administration. The specific grade rating assigned by the tire's
manufacturer in each category is shown on the sidewall of the tires on your vehicle.
All passenger vehicle tires must conform to Federal safety requirements in addition to these grades.
295
M A I N TA I N I N G YO U R V E H I C L E
Treadwear
The Treadwear grade is a comparative rating, based on the wear rate of the tire
when tested under controlled conditions on a specified government test course.
For example, a tire graded 150 would wear one and one-half times as well on the
government course as a tire graded 100. The relative performance of tires depends upon the actual conditions of their use, however, and may depart significantly from the norm due to variations in driving habits, service practices, and
differences in road characteristics and climate.
Traction Grades
The Traction grades, from highest to lowest, are AA, A, B, and C. These grades
represent the tire's ability to stop on wet pavement, as measured under controlled
conditions on specified government test surfaces of asphalt and concrete. A tire
marked C may have poor traction performance.
WARNING!
The traction grade assigned to this tire is based on straight-ahead braking
traction tests, and does not include acceleration, cornering, hydroplaning, or
peak traction characteristics.
Temperature Grades
The Temperature grades are A (the highest), B, and C, representing the tire's
resistance to the generation of heat and its ability to dissipate heat, when tested
under controlled conditions on a specified indoor laboratory test wheel.
Sustained high temperature can cause the material of the tire to degenerate and
reduce tire life, and excessive temperature can lead to sudden tire failure. The
grade C corresponds to a level of performance, which all passenger vehicle tires
must meet under the Federal Motor Vehicle Safety Standard No. 109. Grades B
and A represent higher levels of performance on the laboratory test wheel, than
the minimum required by law.
WARNING!
The temperature grade for this tire is established for a tire that is properly
inflated and not overloaded. Excessive speed, under-inflation, or excessive
loading, either separately or in combination, can cause heat buildup and possible tire failure.
296
M A I N TA I N I N G YO U R V E H I C L E
REPLACEMENT BULBS
Interior Bulbs
Lamps
Center & Rear Dome Lamp
Center & Rear Reading Lamps
Front Door Courtesy Lamp
Front Header Reading Lamps – If Equipped
Instrument Cluster Lamps
Liftgate Lamp(s)
Overhead Console Reading Lamps
Removable Console Lamp – If Equipped
Visor Vanity Lamps
Bulb Number
LED (Serviced At Authorized Dealer)
LED (Serviced At Authorized Dealer)
LED (Serviced At Authorized Dealer)
LED (Serviced At Authorized Dealer)
LED (Serviced At Authorized Dealer)
LED (Serviced At Authorized Dealer)
LED (Serviced At Authorized Dealer)
LED (Serviced At Authorized Dealer)
6501966
Exterior Bulbs
Lamps
High Intensity Discharge Headlamp
Halogen Headlamp
Dedicated Daytime Running Lamp (If
Equipped)
Front Turn Signal Lamp
Side Marker Lamp
Front Park Lamp
Front Fog Lamp
LED Front Fog Lamp
Center High Mounted Stop (CHMSL) Lamp
Stop/Turn Signal Lamp
Rear Tail/Side Marker Lamp
Backup Lamp
License Lamp
Bulb Number
Low Beam - D3S
High Beam - 9005LL
Reflector Low Beam - H11LL
Projector Halogen Low Beam - 9005HL+
All High Beams - 9005LL
LED (Serviced at Authorized Dealer)
PWY24WNA
(If Halogen Headlamp Equipped)
PWY24WSV (If HID Headlamp Equipped)
W3W
PWY24WNA (If Bulb Equipped)
LED (Serviced At Authorized Dealer)
H11LL
LED (Serviced At Authorized Dealer)
LED (Serviced At Authorized Dealer)
W21/5WLL
Rear Tail - Body Side - W21/5WLL
(If Bulb Equipped); LED
(Serviced at Authorized Dealer)
Rear Tail - Liftgate - W5WLL
(If Bulb Equipped); LED
(Serviced at Authorized Dealer)
Rear Side Marker: W3W
W21W
LED (Serviced At Authorized Dealer)
297
CO N S U M E R A S S I S TA N C E
FCA US LLC CUSTOMER CENTER
P.O. Box 21–8004 Auburn Hills, MI 48321–8004 Phone: 1-800-247-9753
FCA CANADA INC. CUSTOMER CENTER
P.O. Box 1621 Windsor, Ontario N9A 4H6 Phone: 1-800-465-2001 (English) Phone:
1-800-387-9983 (French)
ASSISTANCE FOR THE HEARING IMPAIRED
To assist customers who have hearing difficulties, the manufacturer has installed special TDD
(Telecommunication Devices for the Deaf) equipment at its customer center. Any hearing or
speech impaired customer, who has access to a TDD or a conventional teletypewriter (TTY) in
the United States, can communicate with the manufacturer by dialing 1-800-380-CHRY. Canadian residents with hearing difficulties that require assistance can use the special needs relay
service offered by Bell Canada. For TTY teletypewriter users, dial 711 and for Voice callers, dial
1-800-855-0511 to connect with a Bell Relay Service operator.
WARNING!
Engine exhaust, some of its constituents, and certain vehicle components contain, or emit,
chemicals known to the State of California to cause cancer and birth defects, or other
reproductive harm. In addition, certain fluids contained in vehicles and certain products of
component wear contain, or emit, chemicals known to the State of California to cause cancer
and birth defects, or other reproductive harm.
PUBLICATIONS ORDERING
• If you are the first registered retail owner of your vehicle, you may obtain a complimentary
printed copy of the Owner's Manual, Navigation/Uconnect Manuals or Warranty Booklet.
United States customers may visit the Chrysler Contact Us page at www.chrysler.com scroll to
the bottom of the page and select the “Contact Us” link, then select the “Owner’s Manual and
Glove Compartment Material” from the left menu. You may also obtain a complimentary
copy by calling 1-800-247-9753 (U.S.) or 1-800-387-1143 (Canada).
• Replacement User Guide kits, DVDs, or, if you prefer, additional printed copies of the
Owner's Manual, Warranty Booklet, or Radio Manuals may be purchased by visiting
www.techauthority.com or by calling 1-800-890-4038 (U.S.) or 1-800-387-1143 (Canada).
Visa, Master Card, American Express and Discover orders are accepted.
NOTE:
• The Owner's Manual and User Guide electronic files are also available on the Chrysler, Jeep®,
Ram Truck, Dodge and SRT websites.
• Click on the “For Owners” tab, select “Owner/Service Manuals”, then select your desired
model year and vehicle from the drop down lists.
298
CO N S U M E R A S S I S TA N C E
REPORTING SAFETY DEFECTS IN THE UNITED
STATES
If you believe that your vehicle has a defect that could cause a crash or cause injury
or death, you should immediately inform the National Highway Traffic Safety
Administration (NHTSA) in addition to notifying FCA US LLC.
If NHTSA receives similar complaints, it may open an investigation, and if it finds
that a safety defect exists in a group of vehicles, it may order a recall and remedy
campaign. However, NHTSA cannot become involved in individual problems
between you, your authorized dealer or FCA US LLC.
To contact NHTSA, you may call the Vehicle Safety Hotline toll free at
1-888-327-4236 (TTY: 1-800-424-9153); or go to http://www.safercar.gov; or write
to: Administrator, NHTSA, 1200 New Jersey Avenue, SE., West Building,
Washington, D.C. 20590. You can also obtain other information about motor
vehicle safety from http://www.safercar.gov.
In Canada
If you believe that your vehicle has a safety defect, you should contact the
Customer Service Department immediately. Canadian customers who wish to
report a safety defect to the Canadian government should contact Transport
Canada, Motor Vehicle Defect Investigations and Recalls at 1-800-333-0510 or go
to http://www.tc.gc.ca/roadsafety/.
French Canadian customers who wish to report a safety defect to the Canadian
government should contact Transport Canada, Motor Vehicle Defect Investigations and Recalls at 1-800-333-0510 or go to http://www.tc.gc.ca/securiteroutiere/.
299
M O PA R ® ACC E S S O R I E S
AUTHENTIC ACCESSORIES BY MOPAR
• The following highlights just some of the many Authentic Chrysler Accessories by Mopar
featuring a fit, finish, and functionality specifically for your vehicle.
• In choosing Authentic Accessories you gain far more than expressive style, premium protection, or extreme entertainment, you also benefit from enhancing your vehicle with accessories
that have been thoroughly tested and factory-approved.
• For the full line of Authentic Chrysler Accessories by Mopar visit your local dealership or
online at mopar.com for U.S. residents and mopar.ca for Canadian residents.
NOTE:
All parts are subject to availability.
EXTERIOR:
• Front Air Deflector
• Hitch Receiver
• Molded Running Boards
INTERIOR:
• Premium Carpet Floor Mats
• All Weather (Slush) Mats
ELECTRONICS:
• Remote Start
• Electronic Vehicle Tracking
System
CARRIERS:
• Hitch-mount Bike Carrier
• Roof Mount Ski and Snowboard Carrier
300
• Body Side Molding
• Roof Rack
• Molded Splash Guards
• Side Window Air Deflectors
• Door Sill Guards
• Roadside Emergency Kit
• Emergency First Aid Kit
• Cargo Liner
• Mopar Connect (WiFi)
• Rearview Camera
• Roof Mount Bike Carrier
• Tent Kit
• Roof Box Cargo Carrier
• Roof Mount Canoe Carrier
FAQ’ S
FREQUENTLY ASKED QUESTIONS
GETTING STARTED
• How do I install my LATCH Equipped Child Seat? pg. 58
• How do my heated seats operate? pg. 86
ELECTRONICS
How do I use my Uconnect Theater?
• Uconnect Theater (play DVD’s) pg. 190
Which radio is in my vehicle?
• Uconnect 5.0 pg. 140
• Uconnect 8.4/8.4 NAV pg. 151
How do I activate the Audio Jack?
• Uconnect 5.0 pg. 143
• Uconnect 8.4/8.4 NAV pg. 158
How do I set the clock on my radio?
• Uconnect 5.0 pg. 141
• Uconnect 8.4/8.4 NAV pg. 151
How do I use the Navigation feature?
• Uconnect 8.4/8.4 NAV pg. 160
How do I pair my cell phone via Bluetooth with the Uconnect Hands-Free
Voice Activation System? pg. 182
How do I configure my Universal Garage Door Opener (HomeLink)? pg. 207
How do I improve the Bluetooth performance of my Uconnect System? pg. 189
UTILITY
How do I know how much I can tow with my vehicle? pg. 219
WHAT TO DO IN EMERGENCIES
What do I do if my TPMS warning light is blinking? pg. 225
How do I change a flat tire? pg. 237
How do I Jump-Start my vehicle? pg. 249
MAINTAINING YOUR VEHICLE
Where is my Fuse Block located? pg. 269
What type of oil do I use? pg. 262
How often should I change my engine’s oil? pg. 264
What should my tire pressure be set at? pg. 283
301
INDEX
Access
Uconnect . . . . . . . . . . .127, 129, 134
Accessories. . . . . . . . . . . . . . . .300
Mopar . . . . . . . . . . . . . . . .300
Adaptive Cruise Control (ACC)
Off . . . . . . . . . . . . . . . . . . .98
On . . . . . . . . . . . . . . . . . . .98
Adaptive Cruise Control (ACC)
(Cruise Control) . . . . . . . . . . . .98
Adding Engine Coolant (Antifreeze) . . .264
Adding Washer Fluid . . . . . . . . . . .264
Additives, Fuel . . . . . . . . . . . . . .279
Adjust
Down . . . . . . . . . . . . . . . . .73
Forward . . . . . . . . . . . . . . . .73
Rearward . . . . . . . . . . . . . . . .73
Up . . . . . . . . . . . . . . . . . . .73
Aftermarket . . . . . . . . . . . . . . . . .4
Air Bag . . . . . . . . . . . . . . . . . .36
Air Bag Operation . . . . . . . . . . .37
Air Bag Warning Light . . . . . . .35, 38
Driver Knee Air Bag . . . . . . . . . .42
Enhanced Accident Response . . .47, 256
Event Data Recorder (EDR) . . . . .256
Front Air Bag . . . . . . . . . . . . .38
If A Deployment Occurs . . . . . . . .46
Knee Impact Bolsters . . . . . . . . .42
Maintaining Your Air Bag System . . .48
Redundant Air Bag Warning Light . . .36
Side Air Bags . . . . . . . . . . . . . .43
Transporting Pets . . . . . . . . . . .66
Air Bag Light . . . . . . . . . . . . .35, 222
Air Bag Maintenance . . . . . . . . . . .48
Air Cleaner, Engine (Engine Air
Cleaner Filter). . . . . . . . . . . . .264
Air Conditioner Maintenance. . . . . . .264
Air Conditioning . . . . . . . . .110, 111, 113
Air Conditioning Refrigerant . . . . . . .264
Air Conditioning System . . . . . . . . .264
Air Pressure, Tires . . . . . . . . . . . .288
Alarm
Vehicle Security Alarm . . . . . . . . .17
Alarm (Security Alarm). . . . . . . . . . .17
Antifreeze (Engine Coolant). . . . .262, 264
Disposal . . . . . . . . . . . . . . .264
Anti-Lock Warning Light . . . . . . . . .223
App
Uconnect Access . . . . . . . . . . .130
302
Appearance Care. . . . . . . . . . . . .264
Assistance Towing. . . . . . . . . . . . .221
Audio Jack . . . . . . . . . . . . . .143, 158
Automatic Headlights . . . . . . . . . . .91
Automatic Temperature Control
(ATC) . . . . . . . . . . . . . . .111, 113
Air Recirculation . . . . . . . . . . .113
SYNC Temperature Button . . . .111, 113
Automatic Transmission. . . . . . . . . .103
Adding Fluid . . . . . . . . . . . . .263
Fluid Type . . . . . . . . . . . . . .263
Auxiliary Electrical Outlet
(Power Outlet) . . . . . . . . . . . .209
Auxiliary Power Outlet . . . . . . . . . .209
Axle Lubrication . . . . . . . . . . . . .263
Background Themes
Uconnect 8.4A . . . . . . . . . . . .151
Uconnect 8.4N . . . . . . . . . . . .151
Back-Up. . . . . . . . . . . . . . . . . .116
Battery . . . . . . . . . . . . . . . . . .264
Jump Starting . . . . . . . . . . . .249
Blind Spot Monitoring. . . . . . . . . . .119
Body Mechanism Lubrication . . . . . . .264
B-Pillar Location . . . . . . . . . . . . .283
Brake Fluid . . . . . . . . . . . . . . . .263
Brakes . . . . . . . . . . . . . . . . . .264
Brake System . . . . . . . . . . . . . . .264
Fluid Check . . . . . . . . . . . . .263
Master Cylinder . . . . . . . . . . .264
Warning Light . . . . . . . . . . . .223
Brightness, Interior Lights . . . . . . . . .92
Bulbs, Light . . . . . . . . . . . . . . . .297
Calibration, Compass. . . . . . . . . . .204
Camera . . . . . . . . . . . . . . . . . .116
Camera, Rear . . . . . . . . . . . . .116, 117
Canada . . . . . . . . . . . . . . . .4, 299
Capacities, Fluid . . . . . . . . . . . . .262
Caps, Filler
Fuel . . . . . . . . . . . . . . . . .278
Oil (Engine) . . . . . . . . . . . . .264
Car Washes. . . . . . . . . . . . . . . .264
CD (Compact Disc) Player . . . . . . . .158
Changing A Flat Tire . . . . . . . . . . .237
Charging System Light . . . . . . . . . .223
Chart, Tire Sizing . . . . . . . . . . . . .281
Child Restraint. . . . . . . . . . . . . . .49
INDEX
Child Restraints
Booster Seats . . . . . . . . . . . . .52
Center Seat LATCH . . . . . . . . . .57
Child Restraints . . . . . . . . . . . .49
Child Seat Installation . . . . . . .60, 61
How To Stow An Unused ALR
Seat Belt . . . . . . . . . . . . . . . .59
Infants And Child Restraints . . . . . .50
Lower Anchors And Tethers
For Children . . . . . . . . . . . . . .53
Older Children And Child Restraints . .51
Seating Positions . . . . . . . . . . . .53
Using The Top Tether Anchorage . . .63
Cleaning
Wheels . . . . . . . . . . . . .264, 294
Windshield Wiper Blades . . . . . . .264
Climate Control. . . . . . . . . .110, 111, 113
Clock . . . . . . . . . . . . . . . . . . .141
Cluster Warning/Indicator Lights
Anti-Lock Brake (ABS) Light . . . . .223
Brake Warning Light . . . . . . . . .223
Charging System Light . . . . . . . .223
Electronic Park Brake Failure Indicator .228
Electronic Speed Control ON
Indicator . . . . . . . . . . . . . . .228
Electronic Speed Control
SET Indicator . . . . . . . . . . . . .228
Electronic Throttle Control (ETC)
Indicator Light . . . . . . . . . . . .224
Front Fog Light Indicator . . . . . . .227
High Beam Indicator . . . . . . . . .227
Malfunction Indicator Light (MIL) . . .222
Oil Pressure Warning Light . . . . . .223
Park/Headlight ON Indicator . . . . .227
Tire Pressure Monitoring System
(TPMS) Light . . . . . . . . . . . .225
Turn Signal Indicator . . . . . . . . .227
Clutch . . . . . . . . . . . . . . . . . .264
Clutch Fluid . . . . . . . . . . . . . . .264
Compact Spare Tire . . . . . . . . . . .291
Compass Calibration . . . . . . . . . . .204
Connector
UCI . . . . . . . . . . . . . . . . .203
Universal Consumer Interface (UCI) .203
Cooling System . . . . . . . . . . . . .264
Adding Coolant (Antifreeze) . . . . .264
Coolant Capacity . . . . . . . . . .262
Coolant Level . . . . . . . . . . . .264
Disposal Of Used Coolant . . . . . .264
Drain, Flush, And Refill . . . . . . . .264
Inspection . . . . . . . . . . . . . .264
Points To Remember . . . . . . . . .264
Pressure Cap . . . . . . . . . . . . .264
Selection Of Coolant
(Antifreeze) . . . . . . . . . . .262, 264
Corrosion Protection . . . . . . . . . . .264
Customer Assistance . . . . . . . .298, 299
Customer Programmable Features . . . .205
Daytime Brightness, Interior Lights. . . . .92
Defects, Reporting . . . . . . . . . . . .299
Defroster, Rear Window. . . . . . . . . .110
Defroster, Windshield . . . . . . . . . . .110
Delay (Intermittent) Wipers . . . . . . . .93
Disabled Vehicle Towing . . . . . . .221, 253
Disposal
Antifreeze (Engine Coolant) . . . . .264
Disturb . . . . . . . . . . . . . . . . . .186
Door Opener, Garage . . . . . . . . . .206
Door, Power Sliding . . . . . . . . . . . .15
Doors
Lock Doors . . . . . . . . . . . . . . .18
Unlock Doors . . . . . . . . . . . .13, 18
Driver Cockpit . . . . . . . . . . . . . . .6
Driver's Seat Back Tilt . . . . . . . . . . .70
DVD Player (Video Entertainment
System) . . . . . . . . . . . . . . . .190
Electrical Outlet, Auxiliary
(Power Outlet) . . . . . . . . . . . .209
Electric Parking Brake. . . . . . . . . . .108
Electronics . . . . . . . . . . . . . . . . .4
Your Vehicle's Sound System . . . . .124
Electronic Speed Control
(Cruise Control) . . . . . . . . . . . .96
Electronic Stability Control (ESC) . . . .224
Electronic Stability Control (ESC)
OFF Indicator . . . . . . . . . . . . .228
Electronic Throttle Control
Warning Light . . . . . . . . . . . . .224
Emergency, In Case Of
Jacking . . . . . . . . . . . . .237, 240
Jump Starting . . . . . . . . . . . .249
Overheating . . . . . . . . . . . . .230
Towing . . . . . . . . . . . . . .221, 253
Emergency Key . . . . . . . . . . . . . .16
303
INDEX
Engine . . . . . . . . . . . . . . . . . .260
Air Cleaner . . . . . . . . . . . . . .264
Break-In Recommendations . . . . . .90
Checking Oil Level . . . . . . . . . .264
Coolant (Antifreeze) . . . . . . . . .262
Cooling . . . . . . . . . . . . . . . .264
Oil . . . . . . . . . . . . . . .262, 264
Oil Filler Cap . . . . . . . . . . . . .264
Oil Selection . . . . . . . . . .262, 264
Overheating . . . . . . . . . . . . .230
Enhanced Accident Response
Feature . . . . . . . . . . . . . .47, 256
Exhaust System. . . . . . . . . . . . . .264
Exterior Lights . . . . . . . . . . . . . .297
FAQ . . . . . . . . . . . . . . . . . . .301
Filters
Air Cleaner . . . . . . . . . . . . . .264
Engine Oil . . . . . . . . . . . .262, 264
Engine Oil Disposal . . . . . . . . .264
Flashers
Turn Signal . . . . . . . . . . . . . .227
Fluid, Brake . . . . . . . . . . . . . . . .263
Fluid Capacities . . . . . . . . . . . . .262
Fluids And Lubricants. . . . . . . . . . .262
Fog Lights . . . . . . . . . . . . . . . .227
Fold in Floor (Stow `n Go) Seating . . . .78
Forward Collision Warning . . . . . . . .102
Freeing A Stuck Vehicle . . . . . . . . .255
Frequently Asked Questions . . . . . . .301
Front And Rear ParkSense System . . . .114
Front ParkSense System . . . . . . . . . .114
Fuel
Additives . . . . . . . . . . . . . . .279
Filler Cap (Gas Cap) . . . . . . . . .278
Materials Added . . . . . . . . . . .279
Octane Rating . . . . . . . . . . . .262
Specifications . . . . . . . . . . . . .262
Tank Capacity . . . . . . . . . . . .262
Fuses . . . . . . . . . . . . . . . . . . .269
Garage Door Opener
(HomeLink) . . . . . . . . . . .206, 209
Gas Cap (Fuel Filler Cap) . . . . . . . .278
General Maintenance. . . . . . . . . . .264
Glass Cleaning . . . . . . . . . . . . . .264
Hands-Free Phone (Uconnect) . . . . . .180
304
Changing the Volume . . . . . . . . .186
Common Phone Commands . . . . .185
Do Not Disturb . . . . . . . . . . . .186
Incoming Texts . . . . . . . . . . . .187
Mute (Or Unmute) . . . . . . . . . .185
Phonebook . . . . . . . . . . . . . .186
Phone (Pairing) . . . . . . . . . . . .182
Tips and FAQs . . . . . . . . . . . .189
Transfer Calls Between Handset
And Vehicle . . . . . . . . . . . . . .185
Voice Command Tips . . . . . . . . .186
Voice Text Reply . . . . . . . . . . .188
Hands-Free Sliding Door And Liftgate . . .19
Headlights
Cleaning . . . . . . . . . . . . . . .264
Head Restraints . . . . . . . . . . . . . .66
Heated Mirrors . . . . . . . . . . . .111, 113
High Beam Indicator . . . . . . . . . . .227
High Beam/Low Beam Select (Dimmer)
Switch . . . . . . . . . . . . . . . . .93
HomeLink (Garage Door Opener) . . . .206
Hood Prop . . . . . . . . . . . . . . . .257
Hood Release. . . . . . . . . . . . . . .257
Identifying Your Radio. . . . . . . . . . .127
Instrument Cluster Display
Indicator Telltales . . . . . . . . . . .227
Information Display . . . . . . . . . .204
Warning Telltales . . . . . . . . . . .222
Instrument Panel Cover. . . . . . . . . .264
Instrument Panel Lens Cleaning . . . . .264
Interior Appearance Care. . . . . . . . .264
Intermittent Wipers (Delay Wipers) . . . .93
Introduction . . . . . . . . . . . . . . . . .3
Aftermarket Electronics . . . . . . . . .4
Canada . . . . . . . . . . . . . . . . .4
In Vehicle Features
Uconnect Access . . . . . . . . . . .134
Inverter, Power . . . . . . . . . . . . . .209
iPod/USB/MP3 Control . . . . . . . . .203
Bluetooth Streaming Audio . . . . . .180
Jack Location . . . . . . . . . . . . . . .237
Jack Operation . . . . . . . . . . . . . .237
Jump Starting . . . . . . . . . . . . . .249
Key Fob . . . . . . . . . . . . . . . . . .12
KeySense Feature . . . . . . . . . . .15
INDEX
Locking Liftgate .
Unlocking Liftgate
Keyless Enter-N-Go .
Automatic Trans .
Engine Stopping .
Key Fob . . . . .
Passive Entry . . .
Remote Control .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.19
.19
.18
.22
.22
.18
.18
.18
Lane Change Assist . . . . . . . . . . . .93
Lap/Shoulder Belts. . . . . . . . . . . . .25
Latches
Hood . . . . . . . . . . . . . . . . .257
Life Of Tires . . . . . . . . . . . . . . .293
Liftgate, Power . . . . . . . . . . . . . . .14
Lights
Air Bag . . . . . . . . . . . . . . . .35
Automatic Headlights . . . . . . . . .91
Bulb Replacement . . . . . . . . . .297
Fog . . . . . . . . . . . . . . . . . .227
High Beam Indicator . . . . . . . . .227
High Beam/Low Beam Select . . . . .93
Intensity Control . . . . . . . . . . . .92
Low Fuel . . . . . . . . . . . . . . .222
Parade Mode (Daytime Brightness) . . .92
Seat Belt Reminder . . . . . . . . . .222
Service . . . . . . . . . . . . . . . .297
SmartBeams . . . . . . . . . . . . . .91
Tire Pressure Monitoring (TPMS) . .225
Transmission Warning . . . . . . . .225
Loading Vehicle
Tires . . . . . . . . . . . . . . . . .283
Lubrication, Body. . . . . . . . . . . . .264
Maintenance Free Battery . . . . . . . .264
Maintenance, General . . . . . . . . . .264
Maintenance Procedures . . . . . . . . .264
Maintenance Record . . . . . . . . . . .267
Maintenance Schedule . . . . . . . . . .264
Malfunction Indicator Light (Check
Engine) . . . . . . . . . . . . . . . .222
Manual Park Release . . . . . . . . . . .252
Master Cylinder (Brakes) . . . . . . . . .264
Media Center Radio . . . . . . . . . . .148
Memory Feature (Memory Seat). . . . . .74
Memory Seat . . . . . . . . . . . . . . .74
Mirrors
Heated . . . . . . . . . . . . . .111, 113
Memory . . . . . . . . .
Mopar . . . . . . . . . . . .
Mopar Accessories . . . . . .
Multi-Function Control Lever
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
. .74
.300
.300
. .92
Navigation . . . . . . . . . . . . . .160, 163
New Vehicle Break-In Period . . . . . . . .90
Occupant Restraints . . . . . . . . . . . .23
Octane Rating, Gasoline (Fuel). . . . . .262
Oil, Engine . . . . . . . . . . . . .262, 264
Capacity . . . . . . . . . . . . . . .262
Change Interval . . . . . . . . . . .264
Checking . . . . . . . . . . . . . . .264
Disposal . . . . . . . . . . . . . . .264
Filter . . . . . . . . . . . . . .262, 264
Filter Disposal . . . . . . . . . . . .264
Materials Added To . . . . . . . . .264
Recommendation . . . . . . . .262, 264
Viscosity . . . . . . . . . . . . .262, 264
Oil Filter, Selection . . . . . . . . . . . .264
Oil Pressure Light. . . . . . . . . . . . .223
Opener, Garage Door (HomeLink). . . .206
Overheating, Engine . . . . . . . . . . .230
Paint Care . . . . . . . . . . . . . . . .264
Parking Brake . . . . . . . . . . . . . . .108
ParkSense Active Park Assist . . . . . . .115
ParkSense System, Front And Rear . . . .114
ParkSense System, Rear . . . . . . . . . .114
Personalized Menu Bar . . . . . . . . . .153
Pets . . . . . . . . . . . . . . . . . . . .66
Phone, Hands-Free (Uconnect). . . . . .180
Phone (Pairing) . . . . . . . . . . . . . .182
Phone (Uconnect) . . . . . . . . . .149, 180
Placard, Tire And Loading
Information . . . . . . . . . . . .283, 284
Power
Inverter . . . . . . . . . . . . . . . .209
Lift Gate . . . . . . . . . . . . . . . .14
Outlet (Auxiliary Electrical Outlet) . .209
Seats . . . . . . . . . . . . . . . .72, 84
Steering . . . . . . . . . . . . . . .223
Power Seats
Down . . . . . . . . . . . . . . . . .73
Forward . . . . . . . . . . . . . . . .73
Rearward . . . . . . . . . . . . . . . .73
Up . . . . . . . . . . . . . . . . . . .73
305
INDEX
Pregnant Women And Seat Belts. . . . . .31
Preparation For Jacking. . . . . . . . . .239
Pretensioners
Seat Belts . . . . . . . . . . . . . . .31
Programmable Electronic Features . . . .205
Purchase Apps
Uconnect Access . . . . . . . . . . .132
Radial Ply Tires . . . . . . . . . . . . . .289
Radio . . . . . . . . . . . . . . . .140, 147
Balance and Fade . . . . . . . . . . .141
Equalizer . . . . . . . . . . . . . . .141
Operation . . . . . . . . . . . . . . .142
Presets . . . . . . . . . . . . . . . .154
Setting the Clock . . . . . . . . . . .141
Radio Remote Controls. . . . . . . . . .202
Radio Screens . . . . . . . . . . . . . . .151
Radio (Sound Systems) . . . . . . .140, 147
Rear Camera . . . . . . . . . . . . .116, 117
Rear Cross Path . . . . . . . . . . . . . .119
Rear ParkSense System . . . . . . . . . .114
Reclining Front Seats . . . . . . . . . . . .71
Recreational Towing. . . . . . . . . . . .219
Refrigerant . . . . . . . . . . . . . . . .264
Release, Hood . . . . . . . . . . . . . .257
Reminder, Seat Belt . . . . . . . . . . . .24
Remote Sound System
(Radio) Controls . . . . . . . . . . .202
Remote Starting System . . . . . . . . . .17
Replacement Bulbs . . . . . . . . . . . .297
Replacement Tires . . . . . . . . . . . .293
Reporting Safety Defects . . . . . . . . .299
Restraint, Head . . . . . . . . . . . . . .66
Restraints, Child . . . . . . . . . . . . . .49
Safety Information, Tire . . . . . . . . .280
Schedule, Maintenance . . . . . . . . . .264
Seat Belt
Adjustable Upper Shoulder
Belt Anchorage . . . . . . . . . . . .28
Automatic Locking Retractor (ALR) . .32
Energy Management Feature . . . . . .32
Lap/Shoulder Belt Operation . . . . . .27
Lap/Shoulder Belts . . . . . . . . . . .25
Lap/Shoulder Belt Untwisting . . . . .27
Pregnant Women . . . . . . . . . . .31
Seat Belt Extender . . . . . . . . . . .31
Seat Belt Pretensioner . . . . . . . . .31
306
Seat Belt Reminder . . . . . . . . . . .24
Seat Belt Maintenance . . . . . . . . . .264
Seat Belt Reminder . . . . . . . . . . . .24
Seat Belts . . . . . . . . . . . . . . . . .24
Adjustable Shoulder Belt . . . . . . .28
Adjustable Upper Shoulder
Anchorage . . . . . . . . . . . . . .28
Child Restraint . . . . . . . . . . . .49
Extender . . . . . . . . . . . . . . . .31
Front Seat . . . . . . . . . . .24, 25, 27
Operating Instructions . . . . . . . . .27
Pregnant Women . . . . . . . . . . .31
Pretensioners . . . . . . . . . . . . .31
Rear Seat . . . . . . . . . . . . . . .25
Reminder . . . . . . . . . . . . . . .222
Untwisting Procedure . . . . . . . . .27
Seats . . . . . . . . . . . . . . . . . .73, 86
Adjustment . . . . . . . . . . .70, 73, 76
Fold in Floor (Stow `n Go) . . . . . .78
Heated . . . . . . . . . . . . . . . .86
Memory . . . . . . . . . . . . . . . .74
Power . . . . . . . . . . . . . . .72, 84
Reclining . . . . . . . . . . . . . . . .71
Seatback Release . . . . . . . . .70, 76
Stow `n Go (Fold in Floor) . . . . . .78
Tilting . . . . . . . . . . . . . . .70, 76
Security Alarm
Security Alarm . . . . . . . . . . . . .17
Selection Of Coolant (Antifreeze) . . . .262
Shifting
Automatic Transmission . . . . . . .103
Shoulder Belts . . . . . . . . . . . . . . .25
Signals, Turn. . . . . . . . . . . . . .92, 227
Siri . . . . . . . . . . . . . . . . . . . .177
Sirius Satellite Radio . . . . . . . . .143, 155
Traffic & Weather . . . . . . . . . . .163
Sirius Travel Link . . . . . . . . . . . . .163
SmartBeams . . . . . . . . . . . . . . . .91
Snow Tires . . . . . . . . . . . . . . . .290
Sound Systems (Radio) . . . . .140, 158, 160
Spare Tire . . . . . . . . .238, 290, 291, 292
Spark Plugs . . . . . . . . . . . . . . . .262
Specifications
Fuel (Gasoline) . . . . . . . . . . . .262
Oil . . . . . . . . . . . . . . . . . .262
Speed Control
Accel/Decel . . . . . . . . . . . . . .98
Accel/Decel (ACC Only) . . . . . . .99
INDEX
Cancel . . . . . . . . . . . . . . . .98
Distance Setting (ACC Only) . . . .100
Mode Setting (ACC Only) . . . . . .101
Resume . . . . . . . . . . . . . . . .98
Speed Control (Cruise Control) . . . . . .96
Starting
Remote . . . . . . . . . . . . . . . .17
Steering
Tilt Column . . . . . . . . . . . . . .88
Wheel, Heated . . . . . . . . . .88, 89
Wheel, Tilt . . . . . . . . . . . . . .88
Steering Wheel Audio Controls. . . . . .202
Steering Wheel Mounted Sound System
Controls. . . . . . . . . . . . . . . .202
Stow `n Go (Fold in Floor) Seats . . . . .78
Stow ‘n Vac . . . . . . . . . . . . . . . .212
Stuck, Freeing . . . . . . . . . . . . . .255
Sun Roof . . . . . . . . . . . . . . . . .120
Supplemental Restraint System Air Bag . . . . . . . . . . . . . . . . .36
Telescoping Steering Column . . . . . . .88
Temperature Control, Automatic
(ATC) . . . . . . . . . . . . . . .111, 113
Text Messaging . . . . . . . . .150, 187, 188
Tilt Steering Column. . . . . . . . . . . .88
Tire And Loading Information
Placard . . . . . . . . . . . . . .283, 284
Tire Markings. . . . . . . . . . . . . . .280
Tires . . . . . . . . . . . . . .287, 290, 295
Aging (Life Of Tires) . . . . . . . . .293
Air Pressure . . . . . . . . . . .283, 287
Changing . . . . . . . . . . . . . . .237
Compact Spare . . . . . . . . . . . .291
General Information . . . . . . .287, 290
High Speed . . . . . . . . . . . . .288
Inflation Pressures . . . . . . . . . .288
Jacking . . . . . . . . . . . . . .237, 240
Life Of Tires . . . . . . . . . . . . .293
Load Capacity . . . . . . . . . .283, 284
Quality Grading . . . . . . . . . . .295
Radial . . . . . . . . . . . . . . . .289
Replacement . . . . . . . . . . . . .293
Safety . . . . . . . . . . . . . .280, 287
Sizes . . . . . . . . . . . . . . . . .281
Snow Tires . . . . . . . . . . . . . .290
Spare Tire . . . . . . . . .238, 290, 292
Spinning . . . . . . . . . . . . . . .292
Tread Wear Indicators . . . . . . . .293
Tire Safety Information . . . . . . . . . .280
Tire Service Kit . . . . . . . . . . . . . .231
To Open Hood . . . . . . . . . . . . . .257
Towing
Disabled Vehicle . . . . . . . . . . .253
Guide . . . . . . . . . . . . . . . .219
Recreational . . . . . . . . . . . . .219
Weight . . . . . . . . . . . . . . . .219
Towing Vehicle Behind A Motorhome. . .219
Trailer Towing Guide . . . . . . . . . . .219
Trailer Weight . . . . . . . . . . . . . . .219
Transmission . . . . . . . . . . . . . . .103
Automatic . . . . . . . . . . . . . .103
Fluid . . . . . . . . . . . . . . . . .264
Maintenance . . . . . . . . . . . . .264
Transmitter, Garage Door Opener
(HomeLink). . . . . . . . . . . . . .206
Transporting Pets . . . . . . . . . . . . .66
Tread Wear Indicators. . . . . . . . . . .293
Turn Signals. . . . . . . . . . . . . . . .227
UCI Connector. . . . . . . . . . . . . .203
Uconnect
Access . . . . . . . . . . . .127, 129, 134
Account . . . . . . . . . . .129, 134, 137
Maintaining Your Account . . . . . . .134
Registration . . . . . . . . . . . . . .129
Remote Features . . . . . . . . . . .137
Using Access . . . . . . . . . . . . .133
Uconnect 5.0 . . . . . . . . . . . . . . .140
Uconnect 8.4/8.4 NAV . . . . . . . . . .151
Helpful Tips For Bluetooth . . . . . .189
Phonebook . . . . . . . . . . . . . .186
Transfer Ongoing Call Between
Handset And Vehicle . . . . . . . . .185
Voice Recognition Tips . . . . . . . .186
Uconnect 8.4/8.4 NAV Voice Recognition
Voice Texting . . . . . . . . . . . . .186
Uconnect Access . . . . . . . . . . . . .127
App . . . . . . . . . . . . . . . . . .130
In Vehicle Features . . . . . . . . . .134
Purchase Apps . . . . . . . . . . . .132
Vehicle Health Alert . . . . . . . . . .137
Yelp . . . . . . . . . . . . . . . . . .174
Uconnect (Hands-Free Phone)
Making A Phone Call . . . . . .180, 186
Receiving A Call . . . . . . . . . . .180
307
INDEX
Uconnect Phone . . . . . .180, 185, 186, 187
Uconnect Voice Command .144, 145, 146, 147,
148, 149, 150, 164, 185
Uniform Tire Quality Grades . . . . . . .295
Universal Consumer Interface (UCI)
Connector . . . . . . . . . . . . . .203
Universal Transmitter . . . . . . . . . . .206
Untwisting Procedure, Seat Belt . . . . . .27
USB Port . . . . . . . . . . . . . . .143, 158
Using Access
Uconnect . . . . . . . . . . . . . . .133
Vacuum . . . . . . . . . . . . . . . . . .212
Stow ‘n Vac . . . . . . . . . . . . . .212
Vehicle Loading . . . . . . . . . . . . .284
Vehicle User Guide
ICON Symbol Glossary . . . . . . . .10
In Vehicle Help . . . . . . . . . . . . .10
IVH . . . . . . . . . . . . . . . . . .10
Navigation . . . . . . . . . . . . . . .10
Operating Instructions . . . . . . . . .10
Searching User Guide . . . . . . . . .10
308
Ventilated . . . . . . . . . . . . . . . . .86
Voice Command . . . . . .144, 145, 146, 147,
148, 149, 150, 164, 185
Voice Recognition
System (VR) . .144, 145, 146, 147, 148, 149,
150, 164, 185, 186
Washer
Adding Fluid . . . . . . . . . . . . .264
Washing Vehicle . . . . . . . . . . . . .264
Wheel And Wheel Trim . . . . . . .264, 294
Wheel And Wheel Trim Care . . . .264, 294
Wind Buffeting . . . . . . . . . . . .122, 123
Windshield Washers . . . . . . . . . . . .93
Fluid . . . . . . . . . . . . . . . . .227
Windshield Wiper Blades . . . . . . . . .264
Wiper Blade Replacement . . . . . . . .264
Wipers, Intermittent . . . . . . . . . . . .93
Wrecker Towing. . . . . . . . . . . . . .253
IF YOU ARE THE FIRST REGISTERED RETAIL OWNER OF YOUR VEHICLE, YOU
MAY OBTAIN A COMPLIMENTARY PRINTED COPY OF THE OWNER’S MANUAL,
NAVIGATION/UCONNECT MANUALS OR WARRANTY BOOKLET BY CALLING
1 800 247-9753 (U.S.) OR 1 800 387-1143 (CANADA) OR BY CONTACTING
YOUR DEALER.
The driver’s primary responsibility is the safe operation of the vehicle. Driving while distracted can
result in loss of vehicle control, resulting in a collision and personal injury. FCA US LLC strongly
recommends that the driver use extreme caution when using any device or feature that may take
their attention off the road. Use of any electrical devices, such as cellular phones, computers,
portable radios, vehicle navigation or other devices, by the driver while the vehicle is moving is
dangerous and could lead to a serious collision. Texting while driving is also dangerous and should
never be done while the vehicle is moving. If you find yourself unable to devote your full attention
to vehicle operation, pull off the road to a safe location and stop your vehicle. Some states or
provinces prohibit the use of cellular telephones or texting while driving. It is always the driver’s
responsibility to comply with all local laws.
I M P O R T A N T: This User Guide is intended to familiarize you with the important
features of your vehicle. Your Owner’s Manual, Navigation/Uconnect Manuals and Warranty
Booklets can be found on your DVD (if applicable) or by visiting the website on the back cover
of your User Guide. We hope you find it useful. U.S. residents can purchase replacement kits
by visiting www.techauthority.com and Canadian residents can purchase replacement kits by
calling 1 800 387-1143.
This guide has been prepared to help you get quickly acquainted with your new Chrysler
Brand Vehicle and to provide a convenient reference source for common questions. However, it
is not a substitute for your Owner’s Manual. For complete operational instructions, maintenance
procedures and important safety messages, please consult your Owner’s Manual, Navigation/
Uconnect Manuals and other Warning Labels in your vehicle. Not all features shown in this
guide may apply to your vehicle. For additional information on accessories to help personalize
your vehicle, visit mopar.com (U.S.), mopar.ca (Canada) or your local Chrysler brand dealer.
D R I V I N G A N D A L C O H O L : Drunken driving is one of the most frequent
causes of collisions. Your driving ability can be seriously impaired with blood alcohol levels
far below the legal minimum. If you are drinking, don’t drive. Ride with a designated
non-drinking driver, call a cab, a friend, or use public transportation.
WARNING!
Driving after drinking can lead to a collision. Your perceptions are less sharp, your
reflexes are slower, and your judgment is impaired when you have been drinking.
Never drink and then drive.
Whether it’s providing information about specific
product features, taking a tour through your vehicle’s
heritage, knowing what steps to take following an
accident, or scheduling your next appointment, we
know you’ll find the app an important extension of
your Chrysler vehicle. Simply download the app,
select your make and model and enjoy the ride.
To get this app, go directly to the App
Store or Google Play and enter the search
keyword “Chrysler” (U.S. market only).
Chrysler.com/EN/Owners provides special
offers tailored to your needs, customized vehicle
galleries, personalized service records and more.
To get this information, just create an account
and check back often.
Download a FREE electronic copy of the
Owner’s Manual or Warranty Booklet by visiting:
www.mopar.com/chrysler,
www.chrysler.com/en/owners/manuals or
www.chrysler.com/en/warranty (U.S.);
www.owners.mopar.ca/en (Canada).
chrysler.com/pacifica (U.S.)
chrysler.ca/pacifica (Canada)
©2017 FCA US LLC. All Rights Reserved.
Chrysler is a registered trademark of FCA US LLC.
1 7 R U - 9 2 6 - A A • PA C I F I C A
SEVENTH EDITION REV 1 • USER GUIDE
T H E C H RYS L ER
PACIFICA 2017 USER GUIDE
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising