Mobile Amplifier Products
Mobile Amplifier Products
Easy Mobile Amplifiers/Boosters Keep You Connected On The Move
Mobile Wireless Amplifier Systems
Easy carries several types of Mobile Wireless Amplifiers that work with any cell phone or cellular data
card. The models are listed below along with Carrier and frequency information. All models require an
external antenna.
Mobile Wireless Amplifier System
Requires no physical connection to your phone – it’s wireless.
Transmits and receives an improved wireless signal inside your vehicle.
◎ Requires NO physical connection to your phone or cellular
data card
◎ The system can be used by multiple phones
◎ Works with all cell phone models and cellular data cards
◎ Inside signal range may vary with signal strength
◎ Must have an external antenna
Each Mobile Wireless Amplifier System contains an amplifier, a Low-Profile inside antenna, a 6-foot
coaxial extension cable, a universal external antenna adapter, and a power cable that plugs into a
12-volt cigarette lighter adapter.
The Magnet Mounts are recommended for ease of installation and mobility.
Direct Connection Amplifier System
Connects directly into your phone with an adapter
Puts the improved signal directly into your cell phone or cellular
data card through a coaxial cable and adapter and gives you
maximum signal performance for rural or remote locations.
◎ Requires a physical cable connection to your phone or
cellular data card
◎ No signal loss because of the direct connection
◎ Best performance in rural or remote locations
◎ Can be used in buildings
◎ Adapters available for most phones and data cards
◎ Must have an external antenna
Each Direct Connection Amplifier System contains an amplifier, a 6-foot coaxial extension cable that
connects to an external antenna adapter (not included), and a power cable that plugs into a 12-volt
cigarette lighter adapter.
Mobile Wireless Cellular Single Band 824-849 MHz Amplifier
Features
◎ Maximum 1 watts output power
◎ No physical connections to your cell phone or cellular data card
Words on all generations of CDMA, TDMA, GSM and high-speed data technologies
◎ Power control logic ensures maximum output power is within cellular standards
◎ Automatic gain adjusting in the event of oscillation and/or overload
◎ Automatic gain control
◎ Automatic shutdown on overload
◎ DC power supply included – AC power supply sold separately
◎ Slim low profile inside antenna include
◎ FCC and IC type accepted
Mobile Wireless Cellular/PCS Dual-Band 824-894MHz / 1850-1990 MHz Amplifier
Features
◎ No physical connection to your cell phone or cellular data card
◎ Works with all generations of CDMA, TDMA, GSM and high-speed
data technologies
◎ Power control logic ensures maximum output power is within
cellular standards
◎ Automatic gain control
◎ Automatic gain adjusting in the event of oscillation and/or overload
◎ Gain indicator lights
◎ Automatic shutdown on overload
◎ Allows multiple phones and cellular data cards to be used simultaneously
◎ Maximum 1 watts output power
◎ DC power-supply included-AC power supply sold separately
◎ Slim low profile inside antenna included
◎ FCC and IC Type Accepted
Antenna and Accessory Options
◎ NMO Mount Cellular Antenna
◎ NMO Trucker Cellular Antenna
◎ Min Magnet Antenna
◎ Magnet Antenna
◎ Trucker Mirror Mount Antenna
◎ Coax Cable
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement