HiFonics Generation X4 Colossus car audio amplifiers Owner’s Manual

Below you will find brief information for Generation X4 Colossus. The Generation X4 Colossus is a high-end 2-channel amplifier that delivers up to 600 watts of power per channel at 4 ohms. It is equipped with a variety of features, including a built-in crossover, bass boost, and remote bass control. The Generation X4 Colossus is ideal for powering a variety of car audio systems, including subwoofers, speakers, and amplifiers. The amplifier is also equipped with a VICE VERSA feature, which allows you to use the amplifier to power a separate speaker system.

PDF Download
Document
HiFonics Generation X4 Colossus Owner's Manual | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • High end 2 channel amplifier
  • 2 x 600 Watt RMS at 4 ohms
  • VICE VERSA feature
  • Remote Bass Control
  • Bass Boost
  • Built-in crossover
  • MOSFET power supply
  • Protection circuitry

Frequently asked questions

The VICE VERSA feature allows you to use the Generation X4 Colossus to power a separate speaker system. This is done by using the LINE OUT outputs on the amplifier to send a signal to a second amplifier. The second amplifier can then be used to power a separate speaker system, such as a subwoofer system.

The remote bass control is a small knob that allows you to adjust the bass level of your system. It is connected to the amplifier with a short cable. You can use the remote bass control to adjust the bass level from the driver's seat.

The bass boost feature allows you to increase the bass level of your system. It is a knob on the front of the amplifier that lets you adjust the bass level by up to 18dB.

The Protect LED indicates that the amplifier is in protection mode. This can be caused by a number of factors, including an overload, overheating, or a short circuit. You should check all of the connections and make sure that the amplifier is not overheating. If the Protect LED remains on, you may need to contact a qualified technician.

A 2-channel amplifier is designed to power two speakers, while a 4-channel amplifier is designed to power four speakers. The Generation X4 Colossus is a 2-channel amplifier.
Preparing document for printing…
0%