ZoneFlex™ 2942

ZoneFlex 2942
™
Smart Wi-Fi 802.11g Access Point
The Best Performing 802.11g Smart Wi-Fi
Access Point with Adaptive Antenna Technology
BENEFITS
The Ruckus ZoneFlex 2942 is the most affordable 802.11g
Best-in-class user performance and density for 802.11g
Wi-Fi access point (AP) that delivers advanced features and
Advanced antenna array and Quality of Service (QoS) software delivers
20 concurrent voice calls, 100 simultaneous data users or 20 Mbps of
guaranteed user throughput for a 5,000 square foot facility.
functionality not available in any low-end consumer AP or
high-end WLAN system.
Extended coverage means fewer APs
Each ZoneFlex 2942 integrates Ruckus-patented BeamFlex™
smart antenna technology that enables consistent, high performance, extended coverage and multimedia support as
Directional, high-gain antennas dynamically combine to give hotspot
operators and enterprises two- to four-times the coverage over typical
consumer and enterprise APs.
it automatically tunes itself to adapt to constant changes in
No RF expertise required
the environment. This means fewer APs, more satisfied users,
Smart antenna array eliminates AP placement issues and minimizes
adjacent AP interference.
and a cost-effective system that can be installed anywhere
by wireless novices.
Channel selection optimizes throughput
Deployed individually, or as a system centrally managed by
ChannelFly dynamic management, based on throughput measurements, not just interference, chooses the best channel to give users the
highest throughput.
the Ruckus ZoneDirector™ Smart WLAN family of controllers, the Ruckus ZoneFlex 2942 can be deployed with or
Optimized for voice over Wi-Fi
without Ethernet cabling. Support for Ruckus Smart Mesh
Specialized antenna design, dynamic signal path selection and precision QoS software optimize delay-sensitive, high-density Voice-overWi-Fi (VoFi) applications. Power Save (UAPSD) maximizes handset
battery life.
Networking streamlines costly and complex deployment
headaches, eliminating the need to run Ethernet cabling to
every access point. This minimizes operational overhead,
making the ZoneFlex 2942 ideal for hotels, schools, airports
and enterprises everywhere.
The ZoneFlex 2942 is also perfect for hot spot operators that
want to deliver business-class hot-spot services — such as
voice over Wi-Fi, IP-based video or secure enterprise access.
A web-based wizard allows any computer user to configure
the ZoneFlex 2942 through the ZoneDirector — creating a
secure and sophisticated WLAN in a matter of minutes. The
Ruckus ZoneFlex 2942 simply plugs into any Ethernet network
and automatically discovers the ZoneDirector. No RF tuning.
No client configuration. A true plug-and-play multimedia
WLAN that is ready to use, stable and high performing.
“IT lite” configuration and management
Web-based wizard enables configuration of multiple APs across the
entire WLAN in minutes. Once configured, the WLAN manages itself.
Smart Mesh Networking streamlines costly and
complex deployment
Integrated Smart Mesh Networking technology automates deployment, eliminates the need to run Ethernet cables to every Smart Wi-Fi
access point.
Hassle free migration to higher speed Wi-Fi
Support for standard 802.3af Power over Ethernet allows enterprises to
use existing PoE switches without costly upgrades.
Enables business class hotspot services
New revenue opportunities are available for operators such as (VoFi)
services, extended enterprise access, IP video applications and tiered
service classes.
ZoneFlex 2942
802.11g Smart Wi-Fi Access Point
Smart Wi-Fi 802.11n Multimedia Access Point
Patented BeamFlex™ Technology Extends Signal
Range, Improves Stability of Client Connections
The ZoneFlex 2942 Smart Wi-Fi access point integrates a
software-controlled smart antenna array that delivers
9 dBi of signal gain and 20 dBi of interference rejection.
This allows a 2 to 4x improvement in signal range and a
reduction in packet loss from the ability to automatically
avoid interference and obstacles.
Advanced WLAN Applications
with Smart/OS
When used with the Ruckus ZoneDirector
Smart WLAN controller, the ZoneFlex 2942
supports a wide range of value-added applications such as guest networking, Smart Wireless
Meshing, Dynamic PSK, hotspot authentication,
wireless intrusion detection and many more.
With Smart/OS, up to 2,048 discrete WLANs
can be created and mapped to the same or different APs or
VLANs. In a centrally managed configuration, the ZoneFlex
2942 works with a wide range of authentication servers
including Microsoft’s Active Directory, LDAP, and RADIUS.
A patented smart antenna array integrates six high-gain
vertically-polarized and six horizontally-polarized antenna
elements. This enables up to 4096 potential antenna
combinations and up to 9 dBi gain, thereby delivering
unprecedented range extension and signal reliability. The
dual polarized smart antenna increases the effectiveness of
spatial-multiplexing, resulting in higher data rates.
Flexible Deployment Options
ZoneFlex 2942 APs can be deployed as a standalone
AP or as part of a centrally managed wireless LAN using
ZoneDirector Smart WLAN controllers. ZoneFlex 2942’s can
be deployed across any L2/L3 network, and can bridge traffic onto the local network, tunnel to a central location using
L2TP or PPPoE, or route between the WAN and NAT’ed
private subnets. It can be wired to the network or connected
wirelessly by meshing to another AP when Ethernet cabling
is unavailable. When used with ZoneDirector, the ZoneFlex
2942 is automatically configured through the network making deployment quick and easy.
External
RP-SMA
RF Connector
AC power
10/100
Ethernet
Soft
reset
10/100
802.3 af
PoE
Complete Local and Remote Management
The ZoneFlex 2942 can be managed as a standalone AP
through a Web-based GUI, using SNMP or through the
Ruckus FlexMaster Wi-Fi remote management system.
Local management can also be performed using the
ZoneDirector Smart WLAN controller. FlexMaster is a
LINUX-based software platform that uses industry-standard
protocols to perform bulk configuration, fault detection,
monitoring and a wide range of troubleshooting capabilities over a wire area connection. The ZoneDirector enables
local management and control of APs, adding value-added
services such as transmit power control, guest networking
and meshing.
An intuitive web-based wizard in the Ruckus
ZoneDirector enables quick and easy configuration of
each ZoneFlex 2942 in a matter of minutes.
ZoneFlex 2942
802.11g Smart Wi-Fi Access Point
ZF 2942
ZoneFlex 2942 Smart Wi-Fi access
points can be deployed in standalone
Guest
SSID
mode or managed by a centralized
ZoneDirector. The ZoneFlex 2942 can
ZF 2942
Voice
SSID
also be deployed with Ruckus Smart
Mesh Networking, eliminating the
need to run Ethernet cables to every
access point.
ZoneDirector
Employee
SSID
Voice
SSID
Employee
SSID
Firewall
Internet
ZF 2942
Router
RADIUS/AD
ZF 2942
Automatic User Security
Used with the Ruckus ZoneDirector, the Ruckus ZoneFlex 2942
provides first-of-its-kind automatic, robust user security enforcement. Provisioning secure wireless access often involves configuring all the client devices with a wireless setting such as an
SSID and encryption key. Typically organizations use a single
pre-shared key for all employees. This is a security problem and an
ongoing operational headache.
Ruckus Dynamic PSK™ on the Ruckus ZoneDirector and ZoneFlex
2942 automates this process to assure integrity of the user authentication system. First-time users simply plug their computers into
the LAN and specify a URL that directs them to a captive portal for
a one-time authentication. Upon authentication, the ZoneDirector
automatically configures the user’s system with the designated
SSID and a unique, dynamically-generated encryption key. The
key can be removed automatically upon expiration, or manually
when the user or their device is no longer trusted.
Business-Class, Multimedia Hotspots
The ZoneFlex 2942 lets operators build a new class of hotspots
and offers multimedia hotspot services. Equipped with a dualpolarized directional antenna system, the ZoneFlex 2942 delivers
stable connectivity to any Wi-Fi-enabled handheld device and
flicker-free support for concurrent video streams and voice over
Wi-Fi calls.
FEATURES
• Adaptive antenna technology and advanced RF
management
• Up to 9 dB signal gain/20 dB interference
rejection
• Automatic interference avoidance, optimized
for high density environment
• Integrated smart antenna array with over
4,000 unique patterns designed for triple-play
services
• Standard 802.3 af Power over Ethernet (PoE)
• Router mode with NAT and DHCP services
• 2- to 4-times extended range and coverage
• Eight BSSIDs with unique QoS and security
policies
• Advanced QoS packet classification and automatic priority for latency sensitive traffic
• Dynamic, per-user rate-limiting for hotspot
WLANs
• WEP, WPA-PSK (AES), 802.1X support for
RADIUS and Active Directory*
• Smart Mesh Networking*
• Zero-IT and Dynamic PSK*
• Admission control/load balancing*
• Airtime fairness
• Captive portal and guest accounts*
Differentiated Services with Multiple SSIDs
Up to eight discrete SSIDs can be configured within each Ruckus
ZoneFlex 2942, each with unique broadcast, QoS, security and
management parameters assigned. This enables hot-zone
operators to easily offer tiered services to different user or traffic
types. Enterprises can use this features to differentiate guest,
contractor and employee access policies or to segment different
traffic types.
• Two 10/100 Mbps Ethernet ports allowing for
daisy chaining of APs and connection
of local devices
• Ceiling or wall mountable
• Kensington lock support
• Limited lifetime warranty
*when used with Ruckus ZoneDirector controller
Specifications
PHYSICAL CHARACTERISTICS
POWER
WI-FI
• External power adapter
• Input: 110-240V AC | Output: 12V DC, 1A
• Power over Ethernet Class 2
STANDARDS
• 802.11b/g
SUPPORTED DATA RATES
• 54,48,36,24,18,12,11,9,6,5.5,2,1 Mbps
PHYSICAL SIZE
• 19.43cm (L), 14.43cm (W), 10.16cm (H)
CHANNELS
WEIGHT
• 680 grams (1.5 lbs.)
• US/Canada: 1-11
• Europe (ETSI X30): 1-13
• Japan X41: 1-13
ANTENNA
• Internal software-configurable
antenna array with directional and omni
high-gain elements that provide over
4,000 unique antenna patterns
• External RP-SMA connector
AUTO CHANNEL SELECTION
• Supported
RF POWER OUTPUT
• Max transmit power 24 dBm
• Country-specific power settings are
configurable
ETHERNET PORTS
• 2 ports, auto MDX, auto-sensing
10/100/1000 Mbps, RJ-45
• Power over Ethernet (802.3af)
TRANSMIT POWER
CONTROL
• Supported
BSSID
• Up to eight
LOCK OPTION
• Integrated Kensington lock
POWER SAVE
• Supported
ENVIRONMENTAL
CONDITIONS
• Operating Temperature:
32°F (0°C) - 122°F (50°C) with PoE
32°F (0°C) - 104°F (40°C) with AC
• Operating humidity: 15% - 95%
non-condensing
WIRELESS SECURITY
• WEP, WPA-PSK, WPA-TKIP, WPA2 AES,
802.11i
• Authentication via 802.1X with the ZoneDirector, local authentication database,
support for RADIUS and ActiveDirectory
POWER DRAW
• 7W (PoE)
• 7W (12V DC)
CERTIFICATIONS
• U.S., Europe, Australia, Brazil, Canada,
Chile, Colombia, Ecuador, Egypt, Hong
Kong, India, Indonesia, Israel, Korea,
Malaysia, Mexico, New Zealand, Pakistan,
Philippines, Singapore, South Africa,
Taiwan, Thailand, UAE, Uruguay, Vietnam
• WEEE/RoHS compliance
• Wi-Fi alliance certification
• EN 60601-1-2
WIRELESS SECURITY
• WEP, WPA-PSK, WPA-TKIP, WPA2 AES,
802.11i
• Authentication via 802.1X, local
authentication database, support for
RADIUS, LDAP, and ActiveDirectory
CERTIFICATIONS
• U.S., Europe, Australia, Brazil, Canada,
Colombia, Hong Kong, India, Israel,
Malaysia, Mexico, New Zealand,
Philippines, Singapore, Taiwan,
Thailand, Vietnam
• WEEE/RoHS compliance
• EN 60601-1-2
• Wi-Fi Alliance Certification (Wi-Fi Certified™)
PERFORMANCE AND CAPACITY
TARGET UDP THROUGHPUT
• 15-20Mbps (54Mbps bursts)
sustainable throughput for a 5000
sq. foot (460 sq meter) area
CONCURRENT STATIONS
• Up to 100
SIMULTANEOUS VoIP CLIENTS
• Up to 20
APPLICATIONS
HOTSPOT
• WISPr
VOICE
• 802.11e/WMM
• U-APSD
NETWORK ARCHITECTURE
IP
• IPv4, IPv6, dual-stack
VLANs
• 802.1Q (1 per BSSID or dynamic, per
user based on RADIUS)
• Port-based
802.1X FOR ETHERNET
PORTS
• Authenticator
• Supplicant
TUNNELING
• L2TP, PPPoE
Product Ordering Information
MODEL
DESCRIPTION
ZoneFlex 2942 802.11g Smart Wi-Fi Access Point
MULTIMEDIA AND QUALITY OF SERVICE
901-2942-XX00
Two-port centrally managed multimedia AP,
no power adapter
802.11e/WMM
• Supported
SOFTWARE QUEUES
• Per traffic type (4), per client
TRAFFIC CLASSIFICATION
• Automatic, heuristics and TOS based
or VLAN-defined
902-0157-0000
Flat ceiling & wall mounting kit
RATE LIMITING
• Dynamic, per-user or per-WLAN
902-0158-0000
Drop ceiling mounting kit
902-0159-XXYY
PoE injector (sold in quantities of 10 or 100)
902-0173-XX10
Power Supply (Qty. 10)
902-0152-XX11
Power Supply (Qty. 60)
Optional Accessories
MANAGEMENT
DEPLOYMENT OPTIONS
• Standalone (individually managed)
• Managed by ZoneDirector
• Managed by FlexMaster
CONFIGURATION
• Web User Interface (HTTP/S)
• CLI (Telnet/SSH), SNMP v1, 2, 3
• TR-069 vis FlexMaster
AUTO AP SOFTWARE
UPDATES
• FTP or TFTP, remote auto available
Ruckus Wireless, Inc.
880 West Maude Avenue, Suite 101, Sunnyvale, CA 94085 USA
PLEASE NOTE: When ordering ZoneFlex Indoor APs, you must specify the
destination region by indicating -US, -IL, or -WW instead of XX. When ordering
PoE injectors or power supplies, you must specify the destination region by
indicating -US, -EU, -AU, -BR, -CN, -IN, -JP, -KR, -SA, -UK, or -UN instead of -XX.
(650) 265-4200 Ph \ (408) 738-2065 Fx
Copyright ©2012, Ruckus Wireless, Inc. All rights reserved. Ruckus Wireless and Ruckus Wireless design are registered in the U.S. Patent
and Trademark Office. Ruckus Wireless, the Ruckus Wireless logo, BeamFlex, ZoneFlex, MediaFlex, MetroFlex, FlexMaster, ZoneDirector,
SpeedFlex, SmartCast, and Dynamic PSK are trademarks of Ruckus Wireless, Inc. in the United States and other countries. All other trademarks
mentioned in this document or website are the property of their respective owners. 801-70654-001 rev 11
w w w.r u c k u s w i re le s s .co m