Thermometers 2013
Thermometers
for catering & food processing
2013
CATERING THERMOMETERS
Catering Thermometers
& thermometer accessories
Selecting the correct thermometer for a food and catering
application is, by definition, very important to achieve the
maximum accuracy and repeatability of the temperature.
The selection criteria for a digital thermometer should include:
l measurement range
l resolution of the reading 1 °C, 0.1 °C or 0.01 °C
l desired accuracy
l response time
We offer a range of catering thermometers and accessories
that are ideal for busy restaurants, cafes, bars and food outlets
where food safety is essential.
fridge & freezer temperatures
Keeping fridges and freezers at the correct temperature is
critical to ensure good food safety during storage.
Food should be stored in a fridge at a minimum of 4 °C but
this is only safe for short periods. It is better to store food
in a fridge at 2 °C.
Food stored in a freezer should be regularly rotated and
stored at between -18 and -22 °C as bacteria will not grow
at these temperatures.
safe food temperatures
To prevent food poisoning, it is essential to kill bacteria.
Most bacteria are killed quickly at between 75 and 100 °C.
The danger zone is between 5 and 70 °C where bacteria
will grow rapidly. Therefore it is important when microwaving
food that there are no cold spots in the food, likewise
when reheating food or sauces that the food is reheated
above 75 °C.
100 °C
bacteria will be destroyed
83 °C
reheated food internal temperatures
74 - 80 °C poultry internal temperatures
D
A
N
G
E
R
Z
O
N
E
71 °C
meat internal temperatures - well done
63 °C
60 °C
bacteria is gradually killed
fish internal temperatures
37 °C
ideal temperature for bacteria to grow
4 °C
2 °C
safe storage for a short period
safer for storage
-18 °C
bacteria will not grow - but may not die
All the above temperatures are a guideline only.
2
for 20
Thermapen™ with
Backlit Display
page 5
Thermamite™ thermometer
NEW improved design
page 7
Therma 20 Plus &
ThermaCheck Plus
pages 8 & 12
Saf-T-Log™ Paperless
Recording Thermometer
page 15
Stainless Steel
ThermaData™ Loggers
page 26
Mini RayTemp™
Infrared Thermometer
page 27
Gourmet thermometer
New Colours
page 31
Low Cost / Water
Resistant thermometer
page 32
page no.
accessories_____________________________20
alarm thermometers____________24-25, 30, 37
BackLit Thermapen™______________________ 5
CaterTemp™ thermometer__________________ 9
CaterTemp™ Plus waterproof thermometer____ 9
colour coded thermometers___________ 5-6, 31
cooking thermometers____________________39
data-loggers_________________________24-26
dial thermometers_________________ 34, 37-39
dishwasher safe thermometer______________33
DTR - Data Temperature Recorder__________14
EcoTemp™ thermometer__________________30
Food Check thermometer__________________ 7
fridge/freezer thermometers_____________34-36
frying thermometer_______________________39
Gourmet thermometer____________________31
infrared thermometers_________________27-29
kits ________________________________18-19
log books______________________________20
max/min thermometers_ 8, 12, 16, 28-30, 32-33
meat thermometers______________________39
milk frothing dial thermometer_____________38
Multi-function thermometer________________26
oven thermometers_______________________34
pocket-sized thermometers________ 5-6, 31-33
poultry thermometer______________________39
probes - K thermocouple__________________17
probes - NTC thermistor__________________11
probes - waterproof NTC thermistor_________13
ProbeWipes_____________________________21
RayTemp™ infrared thermometers_______ 27, 29
Reference Thermapen____________________18
Reference thermometers___________________22
Saf-T-Log™ thermometer__________________15
Sous Vide thermometer kit_________________19
Therma 1, 3 & Elite thermometers__________16
Therma 20 thermometer__________________10
Therma 20 Plus thermometer______________12
ThermaCheck thermometer_________________ 8
ThermaCheck Plus thermometer_____________ 8
ThermaData™ loggers_________________24-26
ThermaLite™ thermometers_________________ 6
Thermamite™ thermometer_________________ 7
Thermapen™ thermometers___________ 4-5, 22
thermistor test caps_______________________13
timers_______________________________37-38
UKAS calibration laboratory_______________23
UniWipes_______________________________21
waterproof thermometers_______8-9, 12, 15, 33
CONTENTS
s
t
c
u
d
NEW Pro 13
description 3
CATERING THERMOMETERS
SuperFast Thermapen™
digital thermometer
l over 50 % faster response than traditional probes
l reaches temperature in just three seconds
l FREE traceable certificate of calibration
reduced tip
l water resistant case
The SuperFast Thermapen thermometer incorporates
a large digital display with a precise read-out of
temperature over the range of -49.9 to 299.9 °C
with a 0.1 °C resolution and an accuracy of
±0.4 °C. The resolution can be switched to 1 °C, if
required, via a switch in the battery compartment.
The thermometer will power off automatically
after ten minutes, maximising battery life.
This feature can be disabled if not required.
The casing is washable and includes 'Biomaster' additive that reduces bacterial growth and the ergonomic rubber
seal minimises the risk of the ingress of water, dust or food. As well as being water resistant, it is still 'probably' the
fastest reading contact thermometer on the market today. The true temperature of a product can be tested in just
three seconds.
Both low battery (icon) and open circuit indication are displayed, when applicable. Each Thermapen is powered by
two lithium coin cell batteries with a minimum life expectancy of 1500 hours.
reduced tip, foldaway probe
The Thermapen incorporates a reduced tip, stainless steel, food penetration probe Ø3.3 x 115 mm, that
conveniently folds back through 180 degrees into the side of the instrument when not in use.
optional accessories
l zip
l protective
PVC wallet with belt strap (830-110)
l protective
silicone boot (830-260)
pouch with belt strap (830-001)
l NEW
glow in the dark protective silicone boot
with magnets (830-265)
°C
specification
4
AUTO
0FF
H AC C P
COMPATIBLE
SuperFast Thermapen
range
-49.9 to 299.9 °C
resolution
0.1 °C or 1 °C - user selectable
accuracy
±0.4 °C (-49.9 to 199.9 °C) otherwise ±1 °C
battery
2 x 3 volt CR2032 lithium coin cell
battery life
1500 hours
sensor type
K thermocouple
display
14.3 mm LCD
dimensions
19 x 47 x 153 mm
weight
97 grams
FREE traceable certificate of calibration included
to avoid cross-contamination
The SuperFast Thermapen is available in ten colours, ideal for many different
applications. These colour-coded Thermapens can be part of your HACCP and
due diligence procedures, being used for different food types or preparation
areas, reducing the risk of cross-contamination. Alternatively, each member of
staff can be given a different coloured thermometer.
suggested uses
Below are just a few examples of the different uses for
the colour-coded SuperFast Thermapen thermometers.
l
raw meat
l
cooked meat
l
salad/fruit products
l
vegetable products
l
raw fish/shellfish
l bakery/dairy
order code
products
Thermapen™
231-217
231-227
231-237
231-247
231-257
231-267
231-277
231-287
231-297
231-307
830-260
830-265
830-110
830-001
832-200
description
Thermapen - white
Thermapen - yellow
Thermapen - green
Thermapen - red
Thermapen - blue
Thermapen - brown
Thermapen - black
Thermapen - orange
Thermapen - pink
Thermapen - purple
protective silicone boot
silicone boot - glow in dark
protective wallet
zip pouch
wall bracket
CATERING THERMOMETERS
Colour-coded Thermapen™
NEW
with intelligent backlit display
l assists in areas where lighting is poor
l ideal for use as part of HACCP procedures
This new model of the Thermapen thermometer features all
the benefits of the SuperFast Thermapen with the additional
feature of an intelligent backlit LCD display.
The intelligent backlit display continuously monitors light
levels and only illuminates the LCD display when ambient
light levels are low, making it easier to read in low light levels.
This feature also maximises battery life.
The battery life is reduced to a minimum of 100 hours when
the backlight is in continuous use. In normal use when the
backlight is not used the battery life is 1500 hours.
optional accessory
l NEW glow in the dark protective
silicone boot with magnets (830-265)
°C
order code
230-217
230-247
230-257
830-260
830-265
830-110
830-001
832-200
AUTO
0FF
H AC C P
COMPATIBLE
description
Thermapen Backlight - white
Thermapen Backlight - red
Thermapen Backlight - blue
protective silicone boot
silicone boot - glow in dark
protective wallet
zip pouch
wall bracket
5
CATERING THERMOMETERS
ThermaLite™ Thermometers
with assured accuracy for life
l temperature range -39.9 to 149.9 °C, with a high accuracy
l water resistant to IP65 when used with silicone boot
l ThermaLite 2 includes CalCheck function
l FREE traceable certificate of calibration
The ThermaLite digital thermometers display temperature over the range of
-39.9 to 149.9 °C with a 0.1 °C resolution and an accuracy of ±0.5 °C
(-39.9 to 124.9 °C). This accuracy is guaranteed for life, due to the
instruments advanced electronics. The ThermaLite 2 incorporates
a CalCheck, °C/°F and hold functions.
The thermometers weigh only 45 grams including battery, and
feature a clear, easy to read LCD display with an open circuit
'Err' and low battery indication. The ThermaLite's auto-power off
facility turns the instrument off automatically after ten minutes,
maximising battery life. The thermometer is housed in a high
impact ABS plastic case which includes the Biomaster additive
that reduces bacterial growth, ideal for routine day-to-day food
and catering applications.
The pointed, Ø3.3 x 130 mm stainless steel, penetration probe is
ideal for measuring the temperature of food and semi-solid materials.
The ThermaLite is available in six colours, suitable for different applications.
ThermaLite 2 with CalCheck function
The ThermaLite 2 incorporates a CalCheck 0 °C function. The
CalCheck is activated by pressing both the 'on/off' and 'hold' buttons simultaneously at the time of switching the unit on.
The
ThermaLite is waterproof to IP65 when used in
conjunction with the protective silicone boot (830-280)
order code
6
226-301
226-311
226-321
226-331
226-341
226-351
226-302
226-312
226-322
226-332
226-342
226-352
830-280
description
ThermaLite 1 - grey
ThermaLite 1 - white
ThermaLite 1 - yellow
ThermaLite 1 - green
ThermaLite 1 - red
ThermaLite 1 - blue
ThermaLite 2 - grey
ThermaLite 2 - white
ThermaLite 2 - yellow
ThermaLite 2 - green
ThermaLite 2 - red
ThermaLite 2 - blue
protective silicone boot
°C/°F
HOLD
AUTO
0FF
H AC C P
COMPATIBLE
Assured
Accuracy
specification
ThermaLite 1 & 2
range
-39.9 to 149.9 °C
resolution
0.1 °C (0.1 °C/°F - ThermaLite 2)
accuracy
±0.5 °C (-39.9 to 124.9 °C)
battery
3 volt CR2032 lithium coin cell
battery life
3000 hours
sensor type
thermistor
display
10 mm LCD
dimensions
Ø29 x 246 mm
weight
45 grams
FREE traceable certificate of calibration included
thermometer & probe
l temperature range -49.9 to 299.9 °C
l designed for the professional caterer
The Food Check is designed specifically for the
food and catering professional who wishes to
purchase an economically priced digital thermometer.
The thermometer will measure temperature quickly
and accurately when monitoring cooked and chilled
foods as part of HACCP and health and safety
procedures.
The thermometer features a large, easy to read, LCD
display with open circuit and low battery indication.
The unit will power off automatically after ten
minutes, maximising battery life.
Each Food Check is supplied with a permanently
attached food penetration probe with 130 mm
stainless steel stem and a 500 mm PVC lead.
order code
221-048
830-251
832-050
description
Food Check
protective silicone boot
s/steel wall bracket & boot
°C
AUTO
0FF
H AC C P
COMPATIBLE
specification
Food Check
range
-49.9 to 299.9 °C
resolution
0.1 °C
accuracy
±0.4 °C (-50 to 199 °C)
battery & battery life 3 x 1.5 volt AAA - 10000 hours
sensor type
K thermocouple
display
12 mm LCD
dimensions
25 x 56 x 128 mm
weight
130 grams
FREE traceable certificate of calibration included
CATERING THERMOMETERS
Food Check
Thermamite™ Thermometer
complete with food penetration probe
l FREE traceable certificate of calibration
l compact & robust design
The Thermamite thermometer offers accuracy, flexibility and ease of use,
coupled with the durability and reliability that is required by the food and
catering industry in helping to meet today's food hygiene legislation.
The thermometer incorporates a clear LCD display with a precise read-out of
temperature over the range of -50 to 300 °C with a 1 °C resolution. Low battery
and open circuit indication are also displayed, when applicable. The unit will
power off automatically after ten minutes, maximising battery life.
Each thermometer is supplied with a permanently
attached pointed, stainless steel food penetration
probe (Ø3.3 x 100 mm) and a 500 mm PVC lead.
°C
order code
261-050
830-251
832-050
AUTO
0FF
H AC C P
COMPATIBLE
description
Thermamite
protective silicone boot
s/steel wall bracket & boot
specificationThermamite
range
-50 to 300 °C
resolution
1 °C
accuracy
±1 °C ±0.1 %
battery
3 x 1.5 volt AAA
battery life
minimum 5 years (10000 hours)
sensor type
K thermocouple
display
12 mm LCD
dimensions
25 x 56 x 128 mm
weight
130 grams
FREE traceable certificate of calibration included
7
CATERING THERMOMETERS
ThermaCheck Thermometer
complete with thermistor penetration probe
l assured accuracy for the life of the thermometer
l high system accuracy ±0.4 °C
The ThermaCheck thermistor thermometer
has been specifically designed for use in the
catering and food processing industries to cope with
routine day-to-day usage.
The instrument is housed in an ergonomic, robust
ABS case that includes 'Biomaster' additive which
reduces bacterial growth. The thermometer's
auto-power off facility turns the instrument off
automatically after ten minutes.
The ThermaCheck thermometer is supplied complete
with a permanently attached food penetration
probe with a 130 mm stainless steel stem and a
one metre coiled PU lead.
order code
226-042
830-251
832-050
description
ThermaCheck
protective silicone boot s/steel wall bracket & boot
AUTO
0FF
°C
H AC C P
COMPATIBLE
Assured
Accuracy
specificationThermaCheck
range
-39.9 to 149.9 °C
resolution
0.1 °C
system accuracy
±0.4 °C (-20 to 70 °C)
battery & life
3 x 1.5 volt AAA - 20000 hours
sensor type
thermistor
display
12 mm LCD
dimensions
25 x 56 x 128 mm
weight
220 grams
FREE traceable certificate of calibration included
ThermaCheck Plus
waterproof thermometer & probe
NEW
l robust waterproof case offering IP66/67 protection
l backlight, auto-off, max/min & hold functions
The new ThermaCheck Plus thermistor thermometer
utilises state of the art electronic circuitry, designed for
reliability and ease of use and can be submerged or
washed under a running tap - ideal for both catering
and food processing applications where cleaning is
paramount.
The instrument is housed in an ergonomic, ABS
case that includes 'Biomaster' additive which reduces
bacterial growth. Each ThermaCheck Plus has an
integrated rubber seal to ensure complete water
resistance and helps to reduce the possibility of damage
in harsh environments.
Each unit is supplied complete with a permanently
attached food penetration probe with a 130 mm
stainless steel stem and one metre coiled PU lead.
order code description
232-042
830-257
8
ThermaCheck Plus
protective silicone boot
°C/°F
HOLD
specification
MAX
MIN
AUTO
OFF
IP66/67
H AC C P
COMPATIBLE
ThermaCheck Plus
range
-39.9 to 149.9 °C
resolution
0.1 °C
system accuracy
±0.4 °C (-10 to 70 °C)
battery & life
3 x 1.5 volt AAA - 10000 hours
sensor type
thermistor
display
15 mm LCD
dimensions
32 x 71 x 141 mm
weight
220 grams
FREE traceable certificate of calibration included
thermometer & probe
l temperature range of -49.9 to 299.9 °C
l FREE traceable certificate of calibration
The CaterTemp professional digital thermometer
is designed with the catering and food processing
industry in mind and incorporates a combination of
proven circuitry and durability. The thermometer is
housed in a robust ABS case that contains 'Biomaster'
additive that helps to reduce bacterial growth.
The instrument's LCD displays open circuit and low
battery indication, when applicable, and will power
off automatically after ten minutes, maximising
battery life.
Each thermometer is supplied with a permanently
attached food penetration probe with a 130 mm
pointed, stainless steel, stem and one metre coiled
PU lead.
order code
221-046
830-253
832-053
description
CaterTemp
protective black silicone boot
s/steel wall bracket & boot
°C
HOLD
AUTO
0FF
H AC C P
COMPATIBLE
specificationCaterTemp
CATERING THERMOMETERS
CaterTemp™
range
-49.9 to 299.9 °C
resolution
0.1 °C
accuracy
±0.4 °C (-50 to 199 °C) otherwise ±1 °C
battery & life
3 x 1.5 volt AAA - 10000 hours
sensor type
K thermocouple
display
12 mm LCD
dimensions
25 x 56 x 128 mm
weight
130 grams
FREE traceable certificate of calibration included
CaterTemp™ Plus Thermometer
robust, waterproof & salt resistant
l extruded aluminium case for superior durability
l waterproof case offering IP66/67 protection
The CaterTemp Plus thermometer incorporates
the latest microprocessor technology with
improved durability, designed for reliability and
ease of use in day-to-day catering and food
processing applications.
The thermometer incorporates a secure battery
compartment with a waterproof cover and is supplied
with a permanently attached, water resistant, heavy
duty, food penetration probe with a Ø3.3 x 130 mm
stainless steel stem and one metre PU coiled lead.
order code description
221-056
221-256
221-356
221-456
221-556
830-242
832-150
CaterTemp Plus - black seal
CaterTemp Plus - yellow seal
CaterTemp Plus - green seal
CaterTemp Plus - red seal
CaterTemp Plus - blue seal
protective PVC boot
wall bracket
°C
IP66/67
HOLD
AUTO
0FF
H AC C P
COMPATIBLE
specification
CaterTemp Plus
range
-49.9 to 299.9 °C
resolution
0.1 °C
accuracy
±0.4 °C ±1 digit
battery & life
9 volt PP3 alkaline - 5000 hours
sensor type
K thermocouple
display
12 mm LCD
dimensions
35 x 60 x 115 mm
weight
244 grams
FREE traceable certificate of calibration included
9
CATERING THERMOMETERS
Therma 20 Thermometer
for high accuracy readings
l assured accuracy for the life of the thermometer
l meets the European Standard EN13485
l FREE traceable certificate of calibration
The Therma 20 thermistor thermometer has been specifically designed for use in
the catering industry with HACCP and health and safety procedures in mind.
The instrument displays temperature to 0.1 °C over the range of -39.9 to 149.9 °C
with a high system accuracy of ±0.4 °C (-10 to 70 °C). This accuracy is guaranteed
for life, due to the instrument's advanced electronics. The Therma 20 features
an easy to read, LCD display with low battery indication. The thermometer can
be used in low ambient working temperatures down to -20 °C, which meets the
requirements of the European Standard EN13485 for the temperature monitoring
of quick frozen foods.
The instrument is housed in an ergonomic, robust ABS case that includes 'Biomaster'
additive which reduces bacterial growth. The thermometer's auto-power off facility turns
the instrument off automatically after ten minutes. The Therma 20 incorporates an easy
to use Lumberg screw-locking type connector, allowing a wide range of interchangeable
probes to be used. ETI offer an extensive range of interchangeable thermistor probes, see
opposite page for full details.
optional accessories
silicone boot - the Therma 20
is waterproof to IP64 when used in
conjunction with this boot (830-251)
lprotective
lstainless steel wall bracket (screws
not supplied) and protective silicone boot (832-050)
lthermistor test caps with UKAS Certificate
of Calibration are available for checking
the accuracy of the Therma 20
thermometer - see page 13
for full details
°C
specification
order code description
226-040 Therma 20
830-251 protective silicone boot
832-050 s/steel wall bracket & boot
the Therma 20 is exclusive of probe
10
AUTO
OFF
H AC C P
COMPATIBLE
Assured
Accuracy
Therma 20
range
-39.9 to 149.9 °C
resolution
0.1 °C
system accuracy ±0.4 °C (-10 to 70 °C)
battery
3 x 1.5 volt AAA
battery life
minimum 5 years (20000 hours)
sensor type
thermistor
display
12 mm LCD
dimensions
25 x 56 x 128 mm
weight
130 grams
FREE traceable certificate of calibration included
NTC thermistor probes with lumberg connectors
order code
penetration probe
Ø3.3 x 130 mm
penetration probe
This stainless steel penetration probe is versatile
and strong and incorporates a heavy duty, ribbed,
polypropylene handle with a white end cap. Ideal
for many temperature measurement applications
including liquids, semi-solids and granular materials.
Response time less than two seconds. Probe
temperature range -40 to 150 °C.
174-166
The above penetration probe is also available 174-162
with colour-coded end caps. Response time 174-163
less than two seconds. Probe temperature 174-164
range -40 to 150 °C.
174-165
 174-167
CATERING THERMOMETERS
Therma 20 Thermometer Probes
Ø3.3 x 130 mm
air or gas wire probe
This fast response, air or gas wire probe is ideal for
measuring air temperatures in fridges, freezers, chill
cabinets and similar. Supplied with a one metre FEP
lead. Response time less than one second. Probe
temperature range -40 to 150 °C.
170-372
Ø3.7 x 30 mm with 1000 mm FEP lead
fast response probe
This stainless steel, fast response, needle penetration 174-100
probe incorporates a heavy duty ribbed, polypropylene
handle. The probe is suitable for liquids and soft
semi-solid materials including fish, fruit and other soft
or delicate materials. Response time less than one
second. Probe temperature range -40 to 150 °C.
Ø2.6 x 130 mm
foil between pack probe
This easy to use, flexible, fast response foil between 170-090
pack probe has been designed to measure between packs or boxes of produce in a variety
of applications. Response time less than three
seconds. Probe temperature range 0 to 100 °C.
40 x 50 mm with 1000 mm FEP lead
air or gas probe
Ø4.5 x 130 mm
corkscrew probe
Ø8 x 100 mm
This stainless steel, fast response, hand held air 174-300
or gas probe incorporates a heavy duty ribbed,
polypropylene handle. The probe is ideal for
measuring air temperatures in refrigeration units,
storage areas and other similar applications.
Response time less than two seconds. Probe
temperature range -40 to 150 °C.
This robust, stainless steel penetration probe 170-175
incorporates a heavy duty, T-shaped polypropylene
handle. The strong and durable probe is
suitable for a wide variety of heavy duty,
general purpose or food processing applications.
Response time less than five seconds. Probe
temperature range -40 to 150 °C.
Please note: the above NTC thermistor probes are also suitable for use with the Therma 20 Plus
11
CATERING THERMOMETERS
Therma 20 Plus
NEW
waterproof thermometer
l robust waterproof case offering IP66/67 protection
l FREE traceable certificate of calibration
l wide range of interchangeable probes
l integrated rubber seal for durability
The new Therma 20 Plus waterproof thermometer offers
IP66/67 protection and is housed in a robust waterproof
white ABS case. The thermometer utilises state of the art
electronic circuitry, designed for reliability and ease of use and
can be submerged or washed under a running tap - ideal for
food processing applications where cleaning is paramount.
MIN
The Therma 20 Plus measures temperature over the range of
-39.9 to 149.9 °C with a 0.1 °C resolution.
The thermometer features a large easy to read, LCD display
with max/min, °C/°F, hold, open circuit, low battery indication
and an optional backlight. The unit also incorporates an
auto-power off facility that automatically turns the instrument
off after ten minutes, maximising battery life.
The instrument is housed in an ergonomic, ABS case
that includes 'Biomaster' additive which reduces bacterial
growth. Each unit has an integrated rubber seal to ensure
complete water resistance and helps to reduce the possibility
of damage in harsh environments.
The Therma 20 Plus incorporates an easy to use waterproof
Lumberg screw-locking type connector, allowing a wide
range of interchangeable thermistor probes to be
used. ETI offer an extensive range of probes,
see pages 11 and opposite for details.
optional accessories
l protective silicone
boot (830-257)
lthermistortest caps
with UKAS Certificate
of Calibration - see
opposite for details
°C/°F
HOLD
specification
order codedescription
232-040 Therma 20 Plus
830-257 protective silicone boot
the Therma 20 Plus is exclusive of probe
12
MAX
MIN
AUTO
OFF
IP66/67
H AC C P
COMPATIBLE
Therma 20 Plus
range
-39.9 to 149.9 °C
resolution
0.1 °C
system accuracy
±0.4 °C (-10 to 70 °C)
battery
3 x 1.5 volt AAA
battery life
minimum 5 years (10000 hours)
sensor type
thermistor
display
15 mm LCD
dimensions
32 x 71 x 141 mm
weight
220 grams
FREE traceable certificate of calibration included
NTC thermistor probes with lumberg connectors
order code
NEW
penetration probe
Ø3.3 x 130 mm
NEW
penetration probe
Ø3.3 x 100 mm
NEW
between pack probe
Ø6 x 130 mm
This waterproof, stainless steel penetration probe
is versatile and strong and incorporates a heavy
duty, ribbed, polypropylene handle with a white
end cap. Ideal for many temperature measurement
applications including liquids, semi-solids and
granular materials. Response time less than three
seconds. Probe temperature range -40 to 150 °C.
174-266
This waterproof, stainless steel plug-mounted
penetration probe is versatile and strong. Ideal
for many temperature measurement applications
including liquids, semi-solids and granular
materials. Response time less than three seconds.
Probe temperature range -40 to 150 °C.
172-000
CATERING THERMOMETERS
Therma 20 Plus Thermometer Probes
This rigid, stainless steel, between pack probe is 174-260
strong and versatile. The probe incorporates a
heavy duty ribbed, polypropylene handle. The
probe has been specifically designed to measure
between packs or boxes of produce. Response time
less than three seconds. Probe temperature range
-60 to 250 °C.
Thermistor Test Caps
supplied with a UKAS Certificate of Calibration
Calibration thermistor test caps are suitable for
checking the accuracy of the Therma 20, Therma 20
Plus or any equivalent thermistor thermometer.
Simply plug in the desired test cap and the display on
the thermometer should show the same temperature as
the certified value.
Each test cap is supplied with a UKAS Certificate of
Calibration with a guaranteed uncertainty of ±0.1 °C.
order code
description
286-001
thermistor test cap -18 °C
286-002
thermistor test cap 0 °C
286-003
thermistor test cap 3 °C
286-004
thermistor test cap 70 °C
286-005
thermistor test cap 100 °C
a UKAS Certificate of Calibration is included
13
CATERING THERMOMETERS
Data Temperature Recorder
checks deliveries are within programmable limits
l programmable limits for chilled, frozen & ambient foods
l range -39.9 to 149.9 °C with 0.1 °C/°F resolution
l print out with ACCEPT or REJECT message
l personalised hard copy print-out
The DTR (Data Temperature Recorder), printing thermometer
has been specifically designed for use in the food industry with
HACCP and health and safety procedures in mind. This printing
thermometer is also a useful aid in the food industry where regular
checks are required for fridges and freezers, providing a printed
record of each temperature measurement.
The print functions can be operated from the keypad on the DTR
or via a button on the thermistor probe to provide hard copy
evidence of whether a delivery can be accepted or rejected against
programmable temperature limits.
The DTR printing thermometer features an easy to read, LCD
display with low battery indication displaying the temperature over
the range of -39.9 to 149.9 °C with a 0.1 °C/°F resolution and a
high system accuracy of ±0.5 °C (-10 to 70 °C).
Programmable temperatures can be set i.e. chilled, ambient
and frozen food temperatures by the user via the compatible
software provided with the unit. The software also allows the
user to personalise the printed ticket with a company name,
address and logo.
The instrument is housed in a robust ABS case and incorporates
an easy to use Lumberg screw-locking type connector, allowing a
wide range of interchangeable probes to be used.
Each DTR is supplied with a battery charger,
two rolls of paper, protective boot and software,
all supplied in a carrying case.
ETI offer an extensive range
of interchangeable thermistor
probes, see pages 11 and 13
for full details.
j.hunt
order code
14
226-270
174-170
812-270
832-757
°C/°F
p.coles
description
DTR printing thermometer
DTR switch penetration probe additional paper roll - single
stainless steel wall bracket the DTR is exclusive of probe
specification
AUTO
OFF
H AC C P
COMPATIBLE
Data Temperature Recorder
range
-39.9 to 149.9 °C
resolution
0.1 °C/°F
system accuracy ±0.5 °C (-10 to 70 °C)
battery
Ni-MH 3.6 volt
battery life
approximately 500 prints
sensor type
thermistor
display
12.7 mm LCD
dimensions
54 x 110 x 183 mm
weight
630 grams
FREE traceable certificate of calibration included
CATERING THERMOMETERS
Saf-T-Log™
NEW
HACCP recording thermometer
l displays date, time, temperature, user & PASS/FAIL
l automatically archives data & creates reports
l paperless! eliminates the use of logbooks
l wide range of interchangeable probes
Measure, store, download and print temperature reports. No more
paper logs or complicated PDA's to train staff how to use! The
Saf-T-Log is as easy to use as your current thermometer.
The Saf-T-Log includes Windows® software to create a list of up
to 100 items that you routinely measure along with up to 25
users. Each item can include a high/low temperature limit that
gives the user instant on-screen PASS/FAIL feedback and gets
printed on the report. Once your checklist is created, it can be
saved, emailed to other users and uploaded onto any Saf-T-Log.
To record readings, simply scroll to the correct item and press
record. Once readings are taken they can be uploaded to a PC
automatically when reconnected. The data is archived and a
report is generated automatically with no additional user input.
The Saf-T-Log report is locked so the data logged cannot be
tampered with.
Each unit measures temperature from -100 to 1372 °C
depending on the probe selected and includes a high contrast
backlit display with accuracy to ±0.4°C and calibration trim
function. The Saf-T-Log is housed in a durable IP66/IP67
waterproof housing that includes 'Biomaster' additive which
reduces bacterial growth.
"The Saf-T-Log is a total innovation from ETI.
No other recording handheld system records
data this intuitively at anywhere near the price"
°C/°F
AUTO
OFF
IP66/67
H AC C P
COMPATIBLE
specificationSaf-T-Log
range
-100 to 1372 °C
resolution
0.1 °C
accuracy
±0.4 °C ±0.1 % of reading
battery
3 x 1.5 volt AAA
battery life
>500 hours
sensor type
type K thermocouple
display
15 mm LCD
dimensions
32 x 71 x 141 mm
weight
220 grams
FREE traceable certificate of calibration included
order codedescription
292-701 Saf-T-Log
830-257 protective silicone boot
the Saf-T-Log is exclusive of probe
15
CATERING THERMOMETERS
Therma 1, 3 & Elite Thermometers
with interchangeable thermocouple probes
l FREE traceable certificate of calibration included
l Elite model includes max/min & backlight
l wide temperature measurement range
l minimum five-years battery life
The Therma 1 and 3 digital thermometers are rugged and easy to use instruments
that operate through the range of -100 to 1372 °C with a 0.1 °C or 1 °C
resolution. The thermometers are housed in a robust ABS case that contains
'Biomaster' additive that helps to reduce bacterial growth.
The Therma 1 and 3 feature a large, easy to read, LCD display with open
circuit 'Err', hold and low battery indication. Each thermometer is powered by
three 1.5 volt AAA batteries that give a minimum of five years battery life. The
units will power off automatically after ten minutes, maximising battery life. This
feature can be disabled by the user, if required.
ETI offer an extensive range of interchangeable type K thermocouple probes, for a
variety of different applications, see opposite page for details.
Therma Elite
The Therma Elite incorporates all the features of a Therma 1 thermometer, but with the
addition of a backlit display, max/min memory function and a mode button for the selection
of 0.1/1 °C/°F. The thermometer also incorporates a calibration trim function (±2 °C)
which allows users to compensate for thermocouple probe errors.
optional accessories
l protective black silicone boot (830-253) the Therma series is
waterproof to IP63 when used in conjunction with this boot
l stainless steel wall bracket (screws not supplied) and protective
black silicone boot (832-053)
°C/°F
HOLD
specification
order code
16
description
221-041
Therma 1
221-043
Therma 3
221-061
Therma Elite
830-253
protective black silicone boot
832-053
s/steel wall bracket & boot
the Therma series is exclusive of probe
MAX
MIN
AUTO
0FF
Therma 1/Elite
Therma 3
range 0.1 °C
-99.9 to 299.9 °C
range 1 °C
300 to 1372 °C
-100 to 1372 °C
resolution
0.1 °C & 1 °C
1 °C
accuracy
±0.4 °C ±0.1 %
±1 °C ±0.1 %
battery
3 x 1.5 volt AAA
battery lifeminimum 5 years (10000 hours)
sensor type
K thermocouple
display
12 mm LCD
dimensions
25 x 56 x 128 mm
weight
130 grams
FREE traceable certificate of calibration included
type K thermocouple
order code
penetration probe
Ø3.3 x 130 mm
penetration probe
Ø3.3 x 300 mm
fast response probe
Ø3.3 x 100 mm
needle penetration probe
Ø1.8 x 130 mm
PTFE handle probe
Ø3.3 x 130 mm
weighted griddle probe
Ø40 x 80 mm
rigid between pack probe
Ø4.5 x 130 mm
miniature needle probe
Ø1.4 reducing to Ø1 mm tip x 50 mm
oven probe
Ø3.3 x 130 mm
This stainless steel penetration probe is strong
123-160
and versatile. Ideal for measuring a wide
variety of applications including liquids and
323-160
(coiled lead)
semi-solids. Response time less than three
seconds. Probe temperature range -60 to 250 °C.
123-168
This extended, stainless steel penetration probe
is versatile. Ideal for measuring a wide variety
323-168
of applications including liquids and semi-solids.
(coiled lead)
Response time less than three seconds. Probe
temperature range -60 to 250 °C.
This reduced tip, fast response, stainless steel
123-159
penetration probe is ideal for liquids or semi 323-159
solids i.e. soft rubber and other similar materials.
(coiled lead)
Response time less than two seconds. Probe
temperature range -60 to 250 °C.
CATERING THERMOMETERS
Hand Held Temperature Probes
123-100
This fast response, stainless steel, needle
penetration probe is suitable for liquids and semi 323-100
solids including soft rubber/plastic etc. Response
(coiled lead)
time less than two seconds. Probe temperature
range -60 to 250 °C.
133-162
This high temperature penetration probe
incorporates a PTFE handle and a two metre PTFE
lead, making it ideal for ovens. Response time
less than three seconds. Probe temperature
range -60 to 250 °C.
133-018
This weighted griddle surface probe utilises flat
ribbon thermocouple technology ensuring a fast
response with minimal heat loss. Response time
less than two seconds. Probe temperature range
-60 to 250 °C.
123-060
This rigid, stainless steel between pack probe
is strong and versatile, designed specifically to
323-060
measure between packets or boxes of produce.
(coiled lead)
Response time less than three seconds. Probe
temperature range -60 to 250 °C.
This miniature, stainless steel needle probe is
133-180
supplied with a one metre PTFE lead. Ideal for
measuring small semi-solid items. Response
time less than one second. Probe temperature
range -60 to 250 °C.
133-170
This oven probe has a stainless steel handle and
a two metre PTFE high temperature lead. An oven
133-173
probe without a handle is available. Response
(no handle)
time less than four seconds. Probe temperature
range -60 to 250 °C
Please note: for hand held type T thermocouple probes, replace the third digit (3) of the order code with the number 7
17
CATERING THERMOMETERS
Thermometer Kits
ideal for food & fridge/freezer monitoring
These thermometer and probe kits are designed for the food and catering industry. For a full specification on the
Therma 20 and Therma 3 see pages 10 and 16. For a full specification on the Therma 22 please contact our sales
office. These kits represent excellent value-for-money as each one is supplied in a FREE carrying case with a FREE
temperature log book and a FREE tub of UniWipes.
professional catering thermometer kit 0.1 °C
each kit contains:
l
l
l
l
l
l
Therma 20 thermometer (226-040)
penetration probe (174-166)
air wire probe (170-372)
temperature log book (831-100)
tub of 40 UniWipes (836-032)
ABS carrying case (834-120)
order code description
860-120
professional catering kit
FREE traceable certificate of calibration included
food hygiene thermometer kit 0.1 °C
each kit contains:
l
l
l
l
l
l
Therma 22 thermometer (227-022)
penetration probe (177-166)
air wire probe (177-372)
temperature log book (831-100)
tub of 40 UniWipes (836-032)
ABS carrying case (834-120)
order code description
860-125
food hygiene kit
FREE traceable certificate of calibration included
budget catering thermometer kit 1 °C
each kit contains:
l
l
l
l
l
l
Therma 3 thermometer (221-043)
penetration probe (123-160)
PTFE wire probe (133-362)
temperature log book (831-100)
tub of 40 UniWipes (836-032)
ABS carrying case (834-120)
order code description
860-025
budget catering kit
FREE traceable certificate of calibration included
18
precise temperature measurement
l simple, affordable & easy to use
l eliminates over-cooking & drying out of meat
l delivers consistent results unlike conventional ovens & grills
l keeps natural flavours, enhances taste & improves nutrition
Sous Vide cooking has become more popular in professional kitchens over the past few years.
New cooking methods require new temperature testing techniques. Therefore, ETI has designed a Sous Vide kit that
contains a high accuracy Therma 1 thermometer, two Sous Vide needle probes (60 and 120 mm), a waterproof
countdown timer, Sous Vide foam/tape (one metre) and FREE tub of UniWipes, all supplied in a FREE ABS carrying
case. For the full specification on the Therma 1 thermometer, see page 16.
Sous Vide is French for 'under vacuum' and is a method of cooking food that has been sealed in airtight plastic bags
then cooked in a water bath for a longer time at lower than normal temperatures. Testing the core temperature is
important in Sous Vide cooking and therefore an accurate thermometer is a must. This method of cooking ensures
the chef maintains the integrity of the ingredients.
CATERING THERMOMETERS
Sous Vide Thermometer Kit
each kit contains:
l Therma
1 thermometer (221-041)
l 60 mm Sous Vide needle probe (133-109)
l 120 mm Sous Vide needle probe (133-110)
l waterproof countdown timer (806-150)
l tub of 40 UniWipes (836-032)
l Sous Vide foam/tape - one metre (600-475)
l ABS carrying case (834-150)
°C
HOLD
AUTO
0FF
order code
description
860-035
Sous Vide thermometer kit
830-253
protective black silicone boot
832-053
stainless steel wall bracket & boot
600-475
Sous Vide foam/tape - one metre
FREE traceable certificate of calibration included
*Alternative Therma 1 probes can be found on page 16
19
CATERING THERMOMETERS
Catering Thermometer
accessories
wall brackets
temperature log book
These stainless steel and
acrylic wall brackets
allow users to store
specific thermometers
safely when not in use
(screws not supplied).
In commercial kitchens each fridge, freezer or cold
cabinet should have its own temperature log/record
book. The log book has a wipe clean cover and contains
six months' supply of easy to use record sheets.
Each log book allows the user to enter three readings
per day consisting of the temperature, time and initials
of the person responsible for recording the data.
832-050
order code
832-050
832-200
832-757
description
Therma series s/s wall bracket & boot
Thermapen acrylic wall bracket
DTR s/s wall bracket
order code description
831-100
A5 temperature log book
831-105
A5 log books - pack of 10
zip pouches
waterproof pouches
The protective zip pouches are ideal for transporting
thermometers and probes and help to protect instruments
against accidental damage. The zip pouches are
manufactured from soft PVC.
These fully waterproof protective pouches are
manufactured from flexible TPU that can be
used to protect a variety of instruments in damp or wet
environments. Each pouch measures 115 x 190 mm.
Both the 830-400 and 830-401 are supplied with an
integral lead, plug and socket. See below for more
information or contact our sales office.
830-001
830-003
order code
20
830-001
830-002
830-003
830-005
description
zip pouch - 35 x 65 x 170 mm
zip pouch - 40 x 110 x 300 mm
zip pouch - 46 x 80 x 290 mm
zip pouch - 46 x 80 x 180 mm
order code
830-350
830-400
830-401
description
TPU pouch
TPU pouch & thermocouple lead
TPU pouch & thermistor lead
Anti-bacterial wipes are ideal for reducing harmful bacteria in the food industry. Each wipe is pre-saturated
with a broad spectrum anti-bacterial solution that is odourless and does not taint food. The wipes are
effective against a wide range of bacteria including listeria and salmonella.
mini tubs of 70 ProbeWipes
CATERING THERMOMETERS
Anti-bacterial Wipes
This mini tub is designed to fit into the user's pocket
and incorporates an easy to dispense flip-top lid. The
mini tub contains 70 blue anti-bacterial ProbeWipes.
Each ProbeWipe measures 70 x 130 mm and is supplied
in cartons of ten tubs.
order code description
836-020
carton x 10 mini tubs
tubs of 40 UniWipes
NEW
tubs of 180 ProbeWipes
optional wall bracket
UniWipes are anti-bacterial wipes suitable for use
on thermometer probes, hands and everyday work
surfaces.
Measuring 85 x 210 mm, each wipe is effective
against killing pathogenic bacteria and viruses that
adhere to surfaces. Supplied in a handy can-sized
container containing 40 wipes. The UniWipes are
sold in cartons of 12 tubs.
order code
836-030
description
carton x 12 tubs of UniWipes
Each tub contains 180 blue anti-bacterial ProbeWipes
that measure 130 x 130 mm.
The tubs are supplied in cartons of six tubs of 180
ProbeWipes.
An optional wall bracket is available, enabling a single
tub of wipes to be conveniently positioned.
order code description
836-050
carton x 6 tubs of ProbeWipes
832-305
s/steel wall bracket for single tub
21
CATERING THERMOMETERS
Reference Thermapen™
0.01 °C resolution, high accuracy thermometer
l 5-point UKAS Certificate of Calibration included
0601
l ideal for calibration comparison checks
The Reference Thermapen thermometer is
a high accuracy PT100 instrument that is
supplied with a 5-point UKAS Certificate of
Calibration. Each certificate indicates deviations
from standards at various check points: -18,
0, 40, 70 and 100 °C. Special ranges may
be certified by arrangement with our UKAS
calibration laboratory.
°C
The unit incorporates a stainless steel, liquid/
penetration probe Ø3.3 x 108 mm, that
conveniently folds back through 180 degrees into
the side of the instrument when not in use.
UKAS
specification
order code
AUTO
0FF
description
222-213
Reference Thermapen
830-260
protective silicone boot
830-265
silicone boot - glow in dark
830-110
protective wallet
832-200
wall bracket
Thermapen is supplied in a zip pouch (830-001)
Reference Thermapen
range
-69.99 to 199.99 °C
resolution
0.01 °C
accuracy
±0.07 °C (-30 to 149.99 °C) otherwise ±0.2 °C
battery
2 x 3 volt CR2032 lithium coin cell - 1000 hours
sensor type
PT100
display
12 mm LCD
dimensions
19 x 47 x 153 mm
weight
97 grams
a UKAS Certificate of Calibration is included
Reference Thermometers
±0.05 °C high system accuracy
l 5-point UKAS Certificate of Calibration included
0601
l supplied complete with high accuracy probe
These Reference thermometers are high accuracy PT100 instruments
that are supplied with a 5-point UKAS Certificate of Calibration.
Each certificate indicates deviations from standards at various check
points: -18, 0, 40, 70 and 100 °C. Special ranges may be certified
by arrangement with our UKAS calibration laboratory.
Each unit features a simple on/off push button
with open circuit 'Err' and low battery indication,
when applicable. The Reference Plus
incorporates the additional features of a
max/min and hold function.
The Reference thermometers are supplied
with a permanently attached, high accuracy
probe incorporating a 1/10th DIN PT100
sensor. The probe measures Ø3.3 x 130 mm
and is supplied with a one metre PVC lead.
order code description
222-055
Reference 222-063
Reference Plus
22
°C
MAX
MIN
HOLD
specification
range
resolution
accuracy
battery
sensor type
display
dimensions
weight
AUTO
0FF
UKAS
Reference & Reference Plus
-199.99 to 199.99 °C
0.01 °C
±0.05 °C (-30 to 150 °C) ±0.1 °C (-50 to 200 °C)
3 x 1.5 volt AAA - 2000 hours
PT100 1/10th DIN
10 mm LCD
25 x 56 x 128 mm
210 grams
a UKAS Certificate of Calibration is included
in-house accredited laboratory
0601
l thermometer temperature range -50 to 200 °C
l rapid turnaround & flexible certification
l certified uncertainties from ±0.04 °C
l one to five-point UKAS Certificates
Our in-house UKAS accredited calibration laboratory for
temperature has a wide measurement range of -50 to
200 °C with a calibration and measurement capability of
0.02 °C. The laboratory can also measure resistance up
to 16 MΩ (i.e. resistance decade boxes and PT100/RTD
temperature simulators) and DC voltage 0 to 200 mV
(i.e. thermocouple simulators and calibrators). Original
UKAS Certificates provide proof that instruments and
probes have been calibrated against nationally approved
standards.
CATERING THERMOMETERS
UKAS Temperature Calibration
thermometers & probes
Each UKAS Certificate indicates the deviations
from standards at various check points, the standard
being -18, 0, 40, 70 and 100 °C with a guaranteed
uncertainty, dependant on the probe type, see
calibration and measurement capability table below.
test caps & simulators
Each UKAS Certificate indicates the deviations from
standards at specific check points (-18, 0, 3, 70 and
100 °C) to an uncertainty of ±0.1 °C (resistance) or
±0.15 °C (thermocouple).
data-loggers
Each UKAS Certificate indicates the deviations from
standards at three check points (-18, 0 and 40 °C)
to an uncertainty of ±0.04 °C.
standard certificate uncertainty
thermistor thermometer & probe
-50 to 150 °C CMC 0.04 °C
PT100 (resistance sensors) thermometer & probe
-50 to 200 °C CMC 0.04 °C
thermocouple thermometer & probe
-50 to 120 °C CMC 0.15 °C
120 to 200 °C CMC 0.2 °C
temperature data-loggers
-50 to 100 °C CMC 0.04 °C
order code UKAS Certificate - temperature
890-200
890-210
890-215
890-230
890-235
890-240
instrument only standard 5-point
instrument & probe system 5-point
checker 3-point
test cap 1-point
simulator 5-point
data-logger 3-point
thermistor & PT100 test caps
-18 to 100 °C CMC 0.1 °C
thermocouple simulators
-200 to -50 °C CMC 0.25 °C
-50 to 1372 °C CMC 0.15 °C
23
CATERING THERMOMETERS
ThermaData™ Logger
recording thermometers
l waterproof housing offering IP66/67 protection
l temperature range -40 to 85 °C or 125 °C
l resolution 0.1 °C, high accuracy ±0.5 °C
l meets EN 12830, S & T , C & D, 1
The ThermaData logger mk II series consists of a comprehensive
range of portable data-loggers utilising the latest in electronic
technology. The ThermaData loggers are housed in waterproof,
ergonomic cases that are designed to meet IP66/67 protection.
The ThermaData logger mk II range offers the choice of either blind
data-loggers or data-loggers with a LCD display. Other options
include internal and external temperature sensors/probes. The
external probes can be either fixed or detachable via a waterproof
three-pin connector. The remote temperature probes are supplied
with either a one or three metre (where stated) PVC/PFA (fixed) or
PUR/PVC (detachable) lead.
Each logger incorporates a red and green LED, the flashing green
LED indicates that the logger is active/logging and the flashing
red LED indicates that your customised preset alarms have been
exceeded. For details of the range of loggers, see opposite.
ThermaData logger PC software
The ThermaData logger is connected to a PC via a USB cradle. By selecting the relevant icon the data can be
downloaded and displayed either as a graph, table or summary. The information can be analysed by zooming
in, storing to disc or exporting as a text (.txt) or Excel (.xls) file to other software packages.
The ThermaData logger software incorporates several useful functions, including the ability to display two traces
on a graph, the trace colours are user selectable. All files can be viewed as thumbnail icons for easy identification.
The ThermaData logger software will work equally with all
ThermaData loggers except the RF version. The software is
both powerful and sophisticated, yet user-friendly enabling
temperature data to be organised and analysed to provide
management information. The software allows the user to
programme the logging sample/interval rate (0.1 to 255
minutes), the real-time clock, °C or °F, delayed start (maximum
23 hours, 59 minutes) or select a magnetic start option. It is
also possible to include a 32-character user ID for each logger.
By selecting continuous logging in the software options, it is
possible to start the ThermaData logger only once and never
have to reset its parameters again, even if downloaded regularly.
Unlike most low cost loggers, the ThermaData logger will
continue recording during and after downloading the data.
The ThermaData logger software is supplied with each USB
cradle. Please note: when initially ordering loggers it is
necessary to order at least one ThermaData logger cradle.
°C/°F
24
MAX
MIN
IP66/67
blind with an internal sensor
This logger incorporates
an internal NTC thermistor
sensor that measures over
the range of -40 to 85 °C
and can record up to 4000
readings.
ThermaData logger - model TD
LCD with an internal sensor
This logger incorporates
an internal NTC thermistor
sensor that measures over
the range of -30 to 85 °C
and can record up to 4000
readings.
order code description
295-001
model TB
order code description
296-001
model TD
ThermaData logger - model TBF
ThermaData logger - model TDF
blind logger with an external fixed sensor
This logger incorporates
an external NTC thermistor
probe with a one metre
PVC/PFA lead that measures
over the range of -40 to
125 °C and can record up
to 4000 readings.
LCD with an external fixed sensor
This logger incorporates
an external NTC thermistor
probe with a one metre
PVC/PFA lead that measures
over the range of -40 to
125 °C and can record up
to 4000 readings.
order code description
295-101
model TBF
order code description
296-101
model TDF
ThermaData logger - model TB1F
ThermaData logger - model TD1F
blind with an internal & external fixed sensor
This logger incorporates
both an internal and external
NTC thermistor probe with
a one metre PVC/PFA lead
that measures over the
range of -40 to 85 °C
(internal) and -40 to 125 °C
(external) and can record
up to 2 x 2000 readings.
LCD with an internal & external fixed sensor
This logger incorporates
both an internal and external
NTC thermistor probe with
a one metre PVC/PFA lead
that measures over the range
of -30 to 85 °C (internal)
and -40 to 125 °C (external)
and can record up to 2 x
2000 readings.
order code description
295-011
model TB1F
order code description
296-011
model TD1F
USB cradle, software & start magnet
optional accessories
This logger cradle is
supplied complete
with
ThermaData
logger PC software
and a start magnet.
Each USB cradle is
supplied with a one metre
PVC lead.
order code
293-804
description
cradle, software & start magnet
CATERING THERMOMETERS
ThermaData logger - model TB
Loggers are supplied with a
white seal as standard, however
coloured seals are available in
packs of seven colours: black,
blue, brown, green, red, white
and yellow. This allows for colourcoding in various applications.
An optional protective silicone
boot is also available.
order code description
830-270
protective silicone boot
296-990
coloured seals - pack of 7
25
CATERING THERMOMETERS
ThermaData™ Logger
blind recording thermometer
l blind recording thermometer & data-logger
l visual display shows if limits are exceeded
The ThermaData logger is designed to record the
temperature of the surrounding environment. Housed in
a water resistant polyethylene case that incorporates
two LED status indicators.
The ThermaData logger software allows the user to
programme the logging sample/interval rate (1 to
255 minutes), the real-time clock, °C/°F, delayed start
(maximum 23 hours, 59 minutes) or push-button start and
a 12-character user ID. The software also incorporates
a password protected calibration adjustment feature
that allows the user to check the calibration of loggers
and make minor adjustments 0.5 °C (±3 °C).
order code description
293-001
ThermaData logger - blue
293-101
software & RS232 serial lead
293-104
software & USB lead
for further details contact our sales office
°C/°F
specification
range
resolution
accuracy
memory
sample rate
battery
battery life
dimensions
weight
MAX
MIN
ThermaData logger
-40 to 85 °C
0.5 °C
±1 °C (±0.5 °C with calibration utility)
2048 temperature readings
1 minute to 255 minutes
3.6 volt ½ AA lithium
minimum 3 years
Ø55 x 25 mm
45 grams
Stainless Steel ThermaData™Logger
blind recording thermometers
l high temperature range -20 to 105 °C
NEW
l food grade 316 stainless steel housing
These new stainless steel data-loggers are ideal for food
and other applications where a high temperature datalogger is required. The ThermaData logger is housed in
a water resistant, stainless steel case to protect the logger
from corrosion, impact and moisture (IP67).
The ThermaData logger software allows the user to
programme the logging sample/interval rate. The software
also incorporates a password protected calibration
adjustment feature that allows the user to check the
calibration of loggers and make minor adjustments.
Two models are available, with or without a probe (probe
Ø3.3 x 50 mm). Each logger is supplied with a two metre
USB lead and ThermaData logger software.
order code description
293-900
stainless steel logger - w/out probe
293-930
stainless steel logger - with probe
supplied with a two metre USB lead &
ThermaData logger software
26
°C/°F
specification
range
resolution
accuracy
memory
sample rate
battery
battery life
dimensions
weight
MAX
MIN
IP66/67
S/Steel ThermaData logger
-20 to 105 °C
0.5 °C
±1 °C (±0.5 °C with calibration utility)
2048 temperature readings
1 minute to 255 minutes
3.6 volt 2/3 AA lithium
minimum 3 years
Ø22.5 x 129 mm (excluding probe)
170 grams
infrared thermometer
NEW
l temperature range -50 to 330 °C
l compact, lightweight & easy to use
l laser dot alignment
l target ratio 12:1
The Mini RayTemp infrared thermometer is a compact, lightweight and low cost
infrared thermometer. Simply aim and pull the trigger to display the temperature
of the item being measured.
This infrared thermometer measures temperature over the range of -50 to 330 °C
with an assured accuracy of ±2 °C over the range of 0 to 330 °C, outside of
this range (-50 to 0 °C) accuracy is ±4 °C.
CATERING THERMOMETERS
Mini RayTemp™
The Mini RayTemp has a clear, easy to read, LCD display with low battery,
backlight indication and an auto-power off facility that turns the instrument off
after 10 seconds, maximising battery life. This thermometer is ideal for
numerous temperature measurement applications where contact with the item
to be measured is an issue.
The thermometer also incorporates laser assisted alignment as standard,
to assist in pin-pointing the area of measurement. The unit incorporates a
12:1 optic ratio (target distance/diameter ratio) and a fixed emissivity of 0.95
making it suitable for a wide range of food and industrial applications.
optional accessories
l
protective nylon pouch with belt strap (830-040)
l
Comparator (814-132)
low cost calibration checker
The Comparator provides an inexpensive way of checking
the temperature of infrared thermometers when used in
conjunction with a Reference thermometer, see page 22.
°C/°F
specification
order code
814-080
830-040
814-132
description
Mini RayTemp
protective nylon pouch
Comparator
range
resolution
accuracy - infrared
field of view
emissivity
battery
battery life
display
dimensions
weight
AUTO
0FF
Mini RayTemp
-50 to 330 °C
0.1 °C/°F
±2 °C (0 to 330 °C) otherwise ±4 °C
target ratio 12:1
0.95 fixed
9 volt PP3
80 hours continuous use
custom LCD
36 x 88 x 131 mm
130 grams
27
CATERING THERMOMETERS
Combo Infrared Thermometer
with foldaway penetration probe
The Combo is two instruments in one compact unit - a
digital infrared non-contact thermometer and a traditional
probe thermometer that features a foldaway penetration
probe. Each unit incorporates an auto-power off facility
that automatically turns the instrument off after fifteen
seconds, maximising battery life. The Combo also features
a lock function for continuous temperature measurement.
Simply aim the infrared thermometer at the target and press
the measurement button to display the surface temperature.
°C/°F
folding probe thermometer
Alternatively, it is possible to take liquid or
semi-solid product temperatures, using the
Combo's stainless steel penetration probe
(Ø3.3 x 120 mm). The probe conveniently
folds back through 180 degrees into the side
of the instrument when not in use.
order code
814-065
830-110
830-001
description
Combo protective wallet
zip pouch
MAX
MIN
AUTO
0FF
specificationCombo
range - infrared -32.9 to 219.9 °C
range - probe
-54.9 to 329.9 °C
resolution
0.1 °C/°F
accuracy - infrared ±2 % or ±2 °C whichever is greater
accuracy - probe ±1 % or ±1 °C whichever is greater
field of view
target ratio 5:1
emissivity
0.95 default - adjustable 0.01 to 1 emissivity
battery
3 volt CR2032 lithium coin cell
battery life
40 hours continuous use
display
custom LCD
dimensions
25 x 40 x 156 mm
weight
75 grams
IR-Chill Infrared
thermometer with max/min function
The IR-Chill thermometer is designed to measure
the temperature of chill cabinets and freezers.
Simply aim the thermometer at the target and press
the measurement button to display the surface
temperature instantly.
Each thermometer incorporates a max/min
function together with an auto-power off facility
that automatically turns the instrument off after
fifteen seconds, maximising battery life. A lock
function is included for continuous temperature
measurement, this is particularly useful when
scanning a number of items.
The IR-Chill is perfect for supermarkets, food
processors and general purpose applications.
Whilst the IR-Chill is cheaper than many infrared
gun-type thermometers, it out-performs most in
low temperature applications.
order code
description
814-090IR-Chill
830-290
protective black silicone boot
28
°C
MAX
MIN
AUTO
0FF
specificationIR-Chill
range
resolution
accuracy
field of view
emissivity
battery
battery life
display
dimensions
weight
-55 to 220 °C
0.1 °C (-9.9 to 199.9 °C) or 1 °C
±1 °C (0 to 64.9 °C) (±1.5 % above 65 °C)
target radio 1:1
0.95 default - adjustable 0.01 to 1 emissivity
3 volt CR2032 lithium coin cell
40 hours
custom LCD
37 x 40 x 113 mm
40 grams
ideal for the food industry
l assured accuracy of ±1 °C over the range of 0 to 65 °C
l temperature range -60 to 500 °C
l compact, lightweight & easy to use
l simple push button operation
The RayTemp 3 infrared thermometer is compact, lightweight and easy to use.
Simply aim and pull the trigger to display the temperature of the item being measured.
In addition the LCD will display the maximum temperature.
The RayTemp 3 measures temperature over the range of -60 to 500 °C with an assured
accuracy of ±1 °C over the range of 0 to 65 °C, outside of this range ±2 °C of reading
in an ambient temperature of between 15 °C and 25 °C, with a repeatability of ±1 °C
of reading.
CATERING THERMOMETERS
RayTemp™ 3 Infrared Thermometer
The instrument incorporates a clear, easy to read, LCD display with low battery, laser and
backlight indication and an auto-power off facility that turns the instrument off after 15 seconds,
maximising battery life. The RayTemp 3 is ideal for measuring food surface temperatures, eliminating
the need to touch or contaminate the food you are measuring, avoiding the risk of cross-contamination.
The unit can be used by anyone, as there is no need to focus or adjust the instrument.
Each RayTemp 3 thermometer features a single push button, allowing the user to select °C or °F. The thermometer
also incorporates laser assisted alignment as standard, to assist in pin-pointing the area of measurement. The
unit incorporates an 11:1 optic ratio (target distance/diameter ratio) and a fixed emissivity of 0.97 making it more
suitable for chilled and frozen foods, although this thermometer can be used for a wide range of other applications.
optional accessories
l
protective nylon pouch with belt strap (830-040)
l ABS carrying case - ideal for transporting the
RayTemp infrared thermometer (834-740)
low cost calibration checker
The Comparator provides an inexpensive way of checking
the temperature of infrared thermometers when used in
conjunction with a Reference thermometer, see page 22.
°C/°F
specification
order code
814-040
830-040
834-740
814-132
description
RayTemp 3
protective nylon pouch ABS carrying case
Comparator
range
resolution
accuracy - infrared
field of view
emissivity
battery
battery life
display
dimensions
weight
MAX
MIN
AUTO
0FF
RayTemp 3
-60 to 500 °C
0.1 °C (-9.9 to 199.9 °C) or 1 °C
±1 °C (0 to 65 °C) otherwise ±2 °C
target ratio 11:1
0.97 fixed
2 x AAA alkaline
140 hours continuous use
custom LCD
39 x 72 x 175 mm
180 grams
29
CATERING THERMOMETERS
Multi-function Thermometer
with max/min & alarm functions
l displays both temperature & alarm set temperature
l supplied with stainless steel food penetration probe
This low cost digital multi-function thermometer is
compact and easy to use. The thermometer features an
easy to read LCD that displays both the temperature and
the alarm set temperatures, ideal for restaurants, bars
and cafes as an economical solution for temperature
measurement applications.
The thermometer features a display hold facility and a
max/min memory function together with an adjustable
audible high/low temperature alarm. The unit indicates
temperature over the range of -49.9 to 149.9 °C with
a 0.1 °C/°F resolution.
The rear of the case incorporates a useful foldaway
worktop stand, pocket clip and probe storage clip. Each
unit is supplied with a pointed, stainless steel, food
penetration probe (Ø3.5 x 125 mm) with one metre
PVC connecting lead and probe cover.
order code description
810-927
multi-function thermometer
°C/°F
HOLD
MAX
MIN
AUTO
OFF
specificationmulti-function
range
resolution
accuracy
battery
battery life
sensor type
display
dimensions
weight
-49.9 to 149.9 °C
0.1 °C/°F
±1 °C (-19.9 to 149.9 °C)
1.5 volt AAA
5000 hours
thermistor
custom LCD
32 x 86 x 116 mm
98 grams
EcoTemp™
max/min thermometer
l max/min, hold & °C/°F functions
l detachable penetration probe
The EcoTemp digital thermometer features a large, easy to read, LCD display
with display hold and max/min memory functions. The instrument measures
temperature over the range of -49.9 to 199.9 °C with a 0.1 °C/°F resolution.
Both open circuit and low battery indication are displayed, when applicable.
This thermometer is ideal for monitoring cooking, cooling and food holding
temperatures as part of HACCP, due diligence and health and safety procedures.
Each EcoTemp thermometer is supplied with a detachable, stainless steel food
penetration probe (Ø3.5 x 125 mm) with a Ø3.2 x 700 mm silicone connecting
lead. Alternative probe options are available, see below for details.
specificationEcoTemp
°C/°F
order code
30
810-950
810-951
810-952
810-955
830-215
HOLD
MAX
MIN
AUTO
0FF
H AC C P
COMPATIBLE
description
EcoTemp thermometer & probe
replacement penetration probe
optional three metre wire probe
optional penetration oven probe
protective silicone boot range
resolution
accuracy
battery
battery life
sensor type
display
dimensions
weight
-49.9 to 199.9 °C
0.1 °C/°F
±1 °C (-49.9 to 149.9 °C)
2 x 1.5 volt AAA
10000 hours
thermistor
custom 22 mm LCD
20 x 58 x 165 mm
115 grams including probe
CATERING THERMOMETERS
Gourmet Thermometer
water resistant with folding probe
l pocket-sized instrument with hold function
l temperature range -39.9 to 149.9 °C
l accuracy of ±0.5 °C or better
l includes CalCheck function
The water resistant Gourmet folding probe thermometer
is an easy to use instrument, ideal for monitoring
cooking, cooling and food holding temperatures
as part of HACCP and health and safety
procedures. The unit measures temperature
over the range of -39.9 to 149.9 °C with a
0.1 °C/°F resolution and incorporates two
push buttons, on/off and hold.
The Gourmet's battery will last up to 3000
hours continuous use or, if used two hours a day,
seven days a week, for a minimum of ten years. Each
unit incorporates a stainless steel, food penetration probe
(Ø3.5 x 110 mm) that conveniently folds back into the side of
the instrument when not in use, rotating through 180 degrees,
allowing the user to transport the instrument safely. The Gourmet
is available in six colours, ideal for many different applications.
CalCheck function
The Gourmet now features a CalCheck 0 °C function. The
CalCheck is activated by pressing both the 'on/off' and 'hold'
buttons simultaneously at the time of switching the unit on.
l
raw meat
l
cooked meat
l
salad/fruit products
l
vegetable products
l
raw fish/shellfish
l bakery/dairy
optional accessory
l protective PVC wallet with belt strap
- ideal for transporting and protecting
your thermometer against accidental
damage (830-110)
products
°C/°F
order code
810-730
810-732
810-733
810-734
810-735
810-736
830-110
830-001
832-200
AUTO
0FF
IP65
H AC C P
COMPATIBLE
specificationGourmet
description
Gourmet thermometer - white
Gourmet thermometer - yellow
Gourmet thermometer - green
Gourmet thermometer - red
Gourmet thermometer - blue
Gourmet thermometer - brown
protective wallet
zip pouch
wall bracket
HOLD
range
resolution
accuracy
battery
battery life
sensor type
display
dimensions
weight
-39.9 to 149.9 °C
0.1 °C/°F
±0.5 °C (-39.9 to 124.9 °C)
3 volt CR2032 lithium coin cell
3000 hours
thermistor
20 mm LCD
20 x 52 x 155 mm
83 grams
31
CATERING THERMOMETERS
Pocket-sized Thermometers
economical & easy to use
pen-shaped thermometer
T-shaped thermometer
This day-to-day thermometer measures temperature
over the range of -49.9 to 149.9 °C, features a
Ø3.5 x 120 mm stainless steel penetration probe and
incorporates a °C/°F switch and display hold feature.
Supplied with a probe cover that includes a pocket clip.
This handy-sized thermometer measures temperature
over the range of -49.9 to 149.9 °C, features a
Ø3.5 x 120 mm stainless steel penetration probe and
incorporates a °C/°F switch and display hold feature.
Supplied with a probe cover that includes a pocket clip.
specificationpen-shaped
range
resolution
accuracy
battery & battery life
display
dimensions
weight
-49.9 to 149.9 °C
0.1 °C/°F
±1 °C
1.5 volt LR44 - 5000 hours
6 mm LCD
17 x 20 x 190 mm
15 grams
specificationT-shaped
-49.9 to 149.9 °C
0.1 °C/°F
±1 °C
1.5 volt LR44 - 5000 hours
6 mm LCD
20 x 58 x 145 mm
15 grams
order code description
810-260
pen-shaped thermometer
order code description
810-265
T-shaped thermometer
water resistant thermometer
waterproof thermometer
This pocket-sized, water resistant
thermometer features a Ø2.5 x 120 mm
fast response reduced tip, stainless
steel food penetration probe. The unit
measures temperature over the
range of -49.9 to 199.9 °C with a
resolution of 0.1 °C/°F.
The thermometer features three easy
to use buttons, max/min, °C/°F and
on/off. Each unit is supplied with
a probe cover that incorporates a
pocket clip.
specification
range
resolution
accuracy
battery & battery life
display
dimensions
weight
water resistant FR
-49.9 to 199.9 °C
0.1 °C/°F
±1 °C (-19.9 to 119.9 °C)
1.5 volt LR44 - 5000 hours
8.5 mm LCD
Ø40 x 17 x 170 mm
28 grams
order code description
810-270
water resistant FR thermometer
32
range
resolution
accuracy
battery & battery life
display
dimensions weight
NEW
This new pocket-sized, waterproof thermometer
features a Ø2.5 x 73 mm stainless steel penetration
probe with reduced tip. The thermometer features max/
min and hold functions and is waterproof to IP66/IP67.
Supplied with a probe cover that includes a pocket clip.
specificationwaterproof
range
resolution
accuracy
battery & battery life
display
dimensions
weight
-39.9 to 149.9 °C
0.1 °C/°F
±0.5 °C (-10 to 100 °C)
3 volt CR2032 - 5000 hours
8 mm LCD
Ø25 x 150 mm
20 grams
order code description
810-278
waterproof thermometer
CATERING THERMOMETERS
Waterproof Thermometer
ideal for dishwashers
l easy to use, pocket-sized thermometer
l FREE protective silicone boot
This waterproof thermometer measures temperature
over the range of -49.9 to 199.9 °C with a 0.1 °C
resolution and features a max/min temperature
recording function and at the back of the instrument a
discreet °C/°F and reset button.
The unit incorporates a Ø3.5 x 120 mm stainless
steel penetration probe. The thermometer can also
be placed inside a dishwasher to ensure the maximum
cycle temperature is correct. This instrument can also
be used as a conventional food penetration probe
thermometer.
Each unit is supplied with a FREE protective silicone
boot and protective probe cover that incorporates a
pocket clip and wall-mounting keyhole slot.
order code
810-275
description
waterproof thermometer
°C/°F
MAX
MIN
IP66/67
specificationwaterproof
range
resolution
accuracy
battery
battery life
display
dimensions
weight
-49.9 to 199.9 °C
0.1 °C/°F
±1 °C/°F (-19.9 to 119.9 °C)
1.5 volt LR44
5000 hours
8 mm LCD
15 x 24 x 200 mm
25 grams
Waterproof Thermometers
robust & heavy duty
l max/min memory & display hold functions
l strong robust stainless steel probe
These easy to use, digital T-shaped waterproof,
thermometers offer IP66/67 protection. The
thermometers incorporate a reduced tip probe that is
ideal for heavy duty applications.
The thermometers measure temperature over the range
of -49.9 to 149.9 °C with a 0.1 °C resolution. The
thermometer will power off automatically after fifteen
minutes, maximising battery life.
Each unit is housed in a robust polycarbonate case
with a strong, stainless steel, penetration probe. The
probe measures Ø5 x 125 mm or 300 mm with a
reduced tip (Ø3.5 x 20 mm) to improve response
time. The waterproof thermometers feature a max/min
memory and display hold function.
order code
810-285
810-287
description
T-shaped - 125 mm probe
T-shaped - 300 mm probe
°C
specification
range
resolution
accuracy
battery
battery life
display
dimensions
weight
HOLD
MAX
MIN
AUTO
0FF
IP66/67
waterproof T-shaped
-49.9 to 149.9 °C
0.1 °C
±1 °C (-19.9 to 119.9 °C)
1.5 volt LR44
5000 hours
12 mm LCD
30 x 88 x 170/345 mm
50/60 grams
33
CATERING THERMOMETERS
34
Fridge or Freezer Thermometers
easy to read bi-metal or spirit-filled
Ø52 mm dial thermometer
spirit-filled thermometers
These spirit-filled fridge/freezer thermometers
feature clearly marked colour-coded zones
for ease of reading.
This easy to read fridge/freezer thermometer has a
Ø52 mm dial. The thermometer indicates temperature
over the range of -30 to 30 °C in 1 °C divisions.
The horizontal thermometer indicates temperature over
the range of -30 to 40 °C in 1 °C divisions. The ABS
housing measures 53 x 130 mm. The thermometer can
be free-standing or hung from a shelf.
The unit incorporates colour-coded zones for ease of
reading. The fridge/freezer thermometer is housed in
an ABS case that incorporates a plastic hook to hang
from a shelf.
The vertical thermometer indicates temperature over
the range of -30 to 40 °C in 1 °C divisions. The ABS
case measures 24 x 150 mm and incorporates a plastic
hook to hang from a shelf.
order code description
800-100
Ø52 mm dial thermometer
800-101
Ø52 mm dial - box of 20
order code description
803-000
vertical spirit-filled thermometer
803-050
horizontal spirit-filled thermometer
Ø70 mm dial thermometer
Ø50 mm dial thermometer
This fridge/freezer thermometer has a Ø70 mm dial.
The thermometer indicates temperature over the range
of -30 to 30 °C in 1 °C divisions. The unit incorporates
colour-coded zones for ease of reading.
This stainless steel, fridge/freezer thermometer has a
Ø50 mm dial. The thermometer indicates temperature
over the range of -30 to 30 °C in 1 °C divisions.
The fridge/freezer thermometer is housed in an ABS
case measuring 60 x 70 mm. The thermometer can
be free-standing or hung from a shelf.
The colour-coded area indicates when the thermometer
is at the correct temperature for a fridge or freezer.
The housing measures 60 x 70 mm and can be
free-standing or hung from a shelf.
order code description
800-000
Ø70 mm dial thermometer
800-001
Ø70 mm dial - box of 10
order code
800-923
description
Ø50 mm dial thermometer
simulates actual food temperature
Most traditional temperature measuring devices in fridges only measure the air
temperature. This is a major problem because cold air is heavier than warm air
and therefore 'drops out of the fridge' the moment the door is opened.
why a FoodSafe thermometer?
The FoodSafe food simulant thermometer, on the other hand, is an
encased thermometer that ensures that it indicates temperature similar
to that of the food stored in the fridge or chill cabinet. Therefore it is not
subject to the changes in air temperature that normally occur when the
door is opened. It is the temperature of the food that is important in
preventing the growth of food poisoning bacteria.
This easy to read FoodSafe fridge thermometer is ideal for domestic or
commercial use, as it is reliable, robust and hygienic. The thermometer
indicates temperature over the range of -30 to 40 °C with an accuracy of
±1 °C over the range of -5 to 20 °C, 2 °C thereafter. The unit is housed
in a clear plastic case with colour-coded zones that indicate when the
temperature is too warm.
CATERING THERMOMETERS
FoodSafe Fridge Thermometer
Each FoodSafe thermometer measures Ø25 x 150 mm high and is supplied
with a metal hook for hanging in a fridge or cold cabinet.
order code
803-900
description
FoodSafe thermometer
Fridge or Freezer Thermometer
spirit-filled with colour-coded zones
This spirit-filled fridge/freezer thermometer indicates
temperature over the range of -40 to 20 °C and -40
to 80 °F with a 1 °C resolution.
The unit is encased in a clear ABS housing
(10 x 30 x 122 mm) and incorporates clearly marked
temperature scales with colour-coded zones.
The thermometer ensures that the indicated
temperature is similar to that of the food stored in a
fridge, chill cabinet or freezer. Therefore the reading
is more accurate and not subject to the changes in
air temperature that normally occur when the door is
opened.
The unit is designed to be hung from a shelf in a fridge,
freezer or cold cabinet, alternatively wall mounted
(brackets supplied). Each unit is sold singly or in boxes
of ten.
order code description
803-925
clear spirit-filled thermometer
803-930
clear spirit-filled - box of 10
35
CATERING THERMOMETERS
Digital Fridge Thermometer
with food safety zone indicator
l energy saving battery feature
l clear easy to read digital display
This water resistant digital fridge thermometer
incorporates a large and clear digital display that
indicates temperature over the range of -9.9 to
49.9 °C with a 0.1 °C resolution. The thermometer
features a unique food safety zone icon 'd' in the
display that indicates when the temperature is outside
the range of 0 to 8 °C.
The fridge thermometer's energy saving feature turns
the unit off when the unit is deprived of light, maximising
battery life. The thermometer is powered by a single
CR2032 battery with a life expectancy of five years.
The thermometer which can be free-standing or hung
from a shelf in the fridge is housed in a robust ABS case
that measures 18 x 42 x 71 mm.
order code
810-241
description
digital fridge thermometer
°C
specification
range
resolution
accuracy
battery
battery life
display
dimensions
weight
digital fridge
-9.9 to 49.9 °C
0.1 °C
±1 °C
3 volt CR2032 lithium coin cell
maximum 5 years
custom LCD
18 x 42 x 71 mm
35 grams
Fridge or Freezer Thermometer
with alarm & max/min functions
l programmable audible alarm
l records the max/min temperatures
This max/min and alarm fridge or freezer thermometer
indicates temperature over the range of -49.9 to 69.9 °C
with a resolution of 0.1 °C and an accuracy of ±1 °C.
The thermometer features a large LCD display,
max/min memory function to record the highest and
lowest temperatures and an audible alarm. The
unit incorporates two temperature sensors, a remote
water resistant probe with one metre PVC lead for the
appliance temperature and an internal sensor for the
room temperature. The external probe can be mounted
onto the fridge internal wall using the suction pad or
mounting bracket supplied.
The thermometer is housed in a durable ABS case and
incorporates a foot-stand for shelf mounting.
order code description
810-210
digital fridge/freezer thermometer
36
°C/°F
specification
range
resolution
accuracy
battery
battery life
display
dimensions
weight
MAX
MIN
digital fridge/freezer
-49.9 to 69.9 °C
0.1 °C/°F
±1 °C
1.5 volt AAA
5000 hours
custom LCD
15 x 52 x 73 mm
48 grams
easy to read bi-metal
Ø55 mm dial oven thermometer
Ø50 mm dial oven thermometer
This stainless steel oven thermometer features a
clear Ø55 mm dial with colour-coded zones. The
green marker indicates the minimum temperature
that commercial hot food display units should
be kept at. The oven thermometer indicates temperature
over the range of 0 to 300 °C in 10 °C divisions. The
case measures Ø43 x 66 x 80 mm.
This stainless steel oven thermometer features a clear
Ø50 mm dial with colour-coded zones. The green
marker indicates the minimum temperature that
commercial heated display units should be kept at.
The oven thermometer indicates temperature over the
range of 50 to 300 °C in 10 °C divisions. The case
measures Ø40 x 60 x 70 mm.
The thermometer can be free-standing or hung from a
shelf and should be positioned in the middle of the oven
for the most accurate temperature reading.
The unit can be free-standing or hung from a shelf and
should be positioned in the middle of the oven for the
most accurate temperature reading.
order code description
800-809
Ø55 mm dial oven thermometer
order code description
800-931
Ø50 mm dial oven thermometer
CATERING THERMOMETERS
Oven Thermometers
Digital Timer
oven & cooking thermometer
This combined clock, countdown timer and thermometer displays both
the actual and the alarm temperature over the range of 0 to 300 °C
and simultaneously the countdown or the actual time.
The timer will count down or up from/to 23 hours, 59 minutes and
59 seconds and the real time clock will display the time in either a
12 or 24-hour format.
The oven thermometer features an audible high alarm that can be set
from the simple to use seven-button keypad. The alarm temperature
is continuously displayed. The unit is designed to sit on a worktop or
can be attached to an appliance via the magnetic pads at the rear
of the instrument.
The thermometer is supplied with a high temperature
probe and one metre stainless steel braided lead. The
probe has an insertion length of 150 mm (Ø4 mm) and
incorporates a reduced diameter tip to aid response time.
order code description
810-060
oven thermometer & timer
810-061
replacement probe
°C/°F
specification
range
resolution
accuracy
battery & battery life
sensor type
display
dimensions
weight
HOLD
oven thermometer & timer
0 to 300 °C
1 °C/°F
±1 °C (0 to 130 °C)
1.5 volt AAA - 5000 hours
thermistor
triple custom LCD
21 x 75 x 128 mm
89 grams
37
CATERING THERMOMETERS
Kitchen Thermometers
for milk, confectionery, preserves & jam
milk frothing dial thermometers
cook's stainless steel
thermometer
The cook's stainless
steel thermometer
indicates temperature
over the range of 40 to
200 °C and 100 to 400 °F
in 2 °C/°F divisions.
The thermometer's scale is clearly
marked for hard crack, soft crack,
hard ball, soft ball, thread, jam
and deep fry.
These milk frothing thermometers incorporate colourcoded zones that make them fast and simple to use.
Available with Ø25 mm dial x 130 mm probe or
Ø45 mm dial x 130 or 175 mm probe. Each
thermometer is supplied with a stainless steel jug
mounting probe clip.
order code
800-810
800-820
800-800
description
Ø25 x 130 mm milk dial
Ø45 x 130 mm milk dial Ø45 x 175 mm milk dial The thermometer's stainless steel
casing incorporates a retaining
clip and measures 50 x 240 mm
plus a 65 mm plastic handle.
Simply insert the thermometer
into the liquid or food being
measured and read the
temperature.
order code description
800-806
cook's thermometer
Digital Timers
count up/down & countdown
count up/down timer
waterproof countdown timer
This countdown timer offers IP65
waterproof protection along
with a large digital display
and loud audible alarm with
variable volume control. Ideal
in busy professional kitchens.
This digital count up/down timer incorporates a
louder than average audible alarm. The timer is fully
programmable, allowing the user to set the time up to
99 minutes and 59 seconds or 19 hours and 59 minutes.
Each unit is powered by a AAA battery and is designed
to sit on a worktop or be attached to an appliance via
the magnetic pad at the rear of the instrument.
order code description
806-105
count up/down timer
38
The keypad allows the user to
set times up to 99 hours, 99
minutes and 99 seconds.
The timer incorporates
magnetic pads and a
keyhole slot for wallmounting or attaching to
an appliance. The unit is
powered by a single AAA battery.
order code description
806-150
waterproof countdown timer
ideal for general kitchen use
Ø45 mm meat dial thermometer
frying thermometer
The meat thermometer incorporates a Ø45 mm
dial with a Ø4 x 105 mm stainless steel pointed
probe. The unit indicates temperature over the range
of 0 to 120 °C in 1 °C divisions.
This frying thermometer incorporates a Ø50 mm dial
and a pointed, stainless steel Ø4 x 150 mm probe.
The frying thermometer indicates temperature over the
range of 0 to 300 °C in 10 °C divisions.
For accurate temperature measurement insert the unit
into the thickest part of the meat or poultry. The dial is
clearly marked for beef, lamb, veal, pork and poultry.
Simply insert the thermometer stem into the oil for the
most accurate temperature reading. The dial is clearly
marked for meat, poultry, fish and chips.
order code description
800-804
Ø45 mm meat dial thermometer
order code description
800-805
frying thermometer - 150 mm
Ø60 mm meat dial thermometer
mini poultry thermometer
CATERING THERMOMETERS
Cooking Thermometers
NEW
This new meat dial thermometer features a large
Ø60 mm dial with a Ø5 x 102 mm stainless steel
pointed probe. The unit indicates temperature over the
range of 20 to 100 °C in 2 °C divisions.
Insert the thermometer into the thickest part of the
chicken or turkey (between the leg and breast) before
putting into the oven. The poultry will be ready when
the dial reaches the green area.
For accurate temperature measurement, insert the unit
into the thickest part of the meat or poultry. The dial
incorporates colour-coded markers for beef, lamb, pork
and poultry for quick and easy reading.
The thermometer incorporates a Ø20 mm dial with
a 55 mm stainless steel probe. Economically priced
these thermometers are an ideal customer giveaway to
encourage the sales of poultry.
order code description
800-884
Ø60 mm meat dial thermometer
order code description
800-850
mini poultry thermometer
39
distributed by:
issue 1 - 764-215/2013
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement