KDC-BT48DAB
KDC-BT48DAB
CD-RECEIVER
INSTRUCTION MANUAL
AMPLI-TUNER LECTEUR DE CD
MODE D’EMPLOI
CD-RECEIVER
BEDIENUNGSANLEITUNG
CD RECEIVER
GEBRUIKSAANWIJZING
SINTOLETTORE STEREO COMPACT DISC
ISTRUZIONI PER L’USO
REPRODUCTOR DE DISCOS COMPACTOS RECEPTOR DE FM/AM
MANUAL DE INSTRUCCIONES
© 2013 JVC KENWOOD Corporation
JS_KWD_KDC_BT48DAB_EWE0_02_EN.indd 1
GET0975-001A (EW/E0)
Data Size:
Book Size:
B6L (182 mm x 128 mm)
B6L (182 mm x 128 mm)
25/11/2013 5:17:20 PM
Information on Disposal of Old Electrical and Electronic Equipment and Batteries
(applicable for EU countries that have adopted separate waste collection systems)
Products and batteries with the symbol (crossed-out wheeled bin) cannot be disposed as
household waste.
Old electrical and electronic equipment and batteries should be recycled at a facility capable of
handling these items and their waste byproducts.
Contact your local authority for details in locating a recycle facility nearest to you. Proper
recycling and waste disposal will help conserve resources whilst preventing detrimental effects
on our health and the environment.
Notice: The sign “Pb” below the symbol for batteries indicates that this battery contains lead.
Information sur l’élimination des anciens équipements électriques et électroniques
et piles électriques (applicable dans les pays de l’Union Européenne qui ont adopté
des systèmes de collecte sélective)
Les produits et piles électriques sur lesquels le pictogramme (poubelle barrée) est apposé ne
peuvent pas être éliminés comme ordures ménagères.
Les anciens équipements électriques et électroniques et piles électriques doivent être recyclés
sur des sites capables de traiter ces produits et leurs déchets.
Contactez vos autorités locales pour connaître le site de recyclage le plus proche. Un recyclage
adapté et l’élimination des déchets aideront à conserver les ressources et à nous préserver des
leurs effets nocifs sur notre santé et sur l’environnement.
Remarque: Le symbole “Pb“ ci-dessous sur des piles électrique indique que cette pile contient
du plomb.
Entsorgung von gebrauchten elektrischen und elektronischen Geräten und Batterien
(anzuwenden in den Ländern der Europäischen Union und anderen europäischen
Ländern mit einem separaten Sammelsystem für solche Geräte)
Das Symbol (durchgestrichene Mülltonne) auf dem Produkt oder seiner Verpackung weist darauf
hin, dass dieses Produkt nicht als normaler Haushaltsabfall behandelt werden darf, sondern an
einer Annahmestelle für das Recycling von elektrischen und elektronischen Geräten und batterien
abgegeben werden muss.
Durch Ihren Beitrag zur korrekten Entsorgung dieses Produktes schützen Sie die Umwelt und
die Gesundheit Ihrer Mitmenschen.
Unsachgemässe oder falsche Entsorgung gefährden Umwelt und Gesundheit. Weitere
Informationen über das Recycling dieses Produktes erhalten Sie von Ihrer Gemeinde oder den
kommunalen Entsorgungsbetrieben.
Achtung: Das Zeichen „Pb“ unter dem Symbol fur Batterien zeigt an, dass diese Batterie Blei
enthalt.
Informatie over het weggooien van elektrische en elektronische apparatuur en
batterijen (particulieren)
Dit symbool geeft aan dat gebruikte elektrische, elektronische producten en batterijen niet bij
het normale huishoudelijke afval mogen.
Lever deze producten in bij de aangewezen inzamelingspunten, waar ze gratis worden
geaccepteerd en op de juiste manier worden verwerkt, teruggewonnen en hergebruikt.
Voor inleveradressen zie www.nvmp.nl, www.ictmilieu.nl, www.stibat.nl. Wanneer u dit
product op de juiste manier als afval inlevert, spaart u waardevolle hulpbronnen en voorkomt
u potentiële negatieve gevolgen voor de volksgezondheid en het milieu, die anders kunnen
ontstaan door een onjuiste verwerking van afval.
Opgelet: Het teken “Pb” onder het teken van de batterijen geeft aan dat deze batterij lood
bevat.
i
JS_KWD_KDC_BT48DAB_EWE0_02_EN.indd i
Data Size:
Book Size:
B6L (182 mm x 128 mm)
B6L (182 mm x 128 mm)
25/11/2013 5:17:21 PM
Informazioni sullo smaltimento delle vecchie apparecchiature elettriche ed
elettroniche e delle batterie (valide per i Paesi Europei che hanno adottato sistemi di
raccolta differenziata)
I prodotti e le batterie recanti il simbolo di un cassonetto della spazzatura su ruote barrato non
possono essere smaltiti insieme ai normali rifiuti di casa.
I vecchi prodotti elettrici ed elettronici e le batterie devono essere riciclati presso un'apposita
struttura in grado di trattare questi prodotti e di smaltirne i loro componenti.
Per conoscere dove e come recapitare tali prodotti nel luogo a voi più vicino, contattare
l'apposito ufficio comunale. Un appropriato riciclo e smaltimento aiuta a conservare la natura e
a prevenire effetti nocivi alla salute e all'ambiente.
Nota: Il simbolo “Pb” sotto al simbolo delle batterie indica che questa batteria contiene
piombo.
Información acerca de la eliminación de equipos eléctricos, electrónicos y baterías al
final de la vida útil (aplicable a los países de la Unión Europea que hayan adoptado
sistemas independientes de recogida de residuos)
Los productos y las baterías con el símbolo de un contenedor con ruedas tachado no podrán ser
desechados como residuos domésticos.
Los equipos eléctricos, electrónicos y baterías al final de la vida útil, deberán ser reciclados en
instalaciones que puedan dar el tratamiento adecuado a estos productos y a sus subproductos
residuales correspondientes.
Póngase en contacto con su administración local para obtener información sobre el punto de
recogida más cercano. Un tratamiento correcto del reciclaje y la eliminación de residuos ayuda
a conservar los recursos y evita al mismo tiempo efectos perjudiciales en la salud y el medio
ambiente.
Nota: El símbolo “Pb” debajo del (contenedor con ruedas tachado) en baterías indica que
dicha batería contiene plomo.
For Israel
For Turkey
Bu ürün 28300 sayılı Resmi Gazete’de yayımlanan Atik Elektrikli ve Elektronik Eşyalarin
Kontrolü Yönetmeliğe uygun olarak üretilmiştir.
Eski Elektrik ve Elektronik Ekipmanların İmha Edilmesi Hakkında Bilgi (ayrı atık
toplama sistemlerini kullanan ülkeleri için uygulanabilir)
Sembollü (üzerinde çarpı işareti olan çöp kutusu) ürünler ev atıkları olarak
atılamaz.
Eski elektrik ve elektronik ekipmanlar, bu ürünleri ve ürün atıklarını geri
dönüştürebilecek bir tesiste değerlendirilmelidir. Yaşadığınız bölgeye
en yakın geri dönüşüm tesisinin yerini öğrenmek için yerel makamlara
müracaat edin. Uygun geri dönüşüm ve atık imha yöntemi sağlığımız ve
çevremiz üzerindeki zararlı etkileri önlerken kaynakların korunmasına da
yardımcı olacaktır.
ii
JS_KWD_KDC_BT48DAB_EWE0_02_EN.indd ii
Data Size:
Book Size:
B6L (182 mm x 128 mm)
B6L (182 mm x 128 mm)
25/11/2013 5:17:21 PM
The marking of products using lasers
The label is attached to the chassis/case and says that the component uses
laser beams that have been classified as Class 1. It means that the unit
is utilizing laser beams that are of a weaker class. There is no danger of
hazardous radiation outside the unit.
Marquage des produits utilisant un laser
L’étiquette est attachée au châssis/boîtier de l’appareil et indique que
l’appareil utilise des rayons laser de classe 1. Cela signifie que l’appareil
utilise des rayons laser d’une classe faible. Il n’y a pas de danger de radiation
accidentelle hors de l’appareil.
Kennzeichnung von Geräten mit Laser-Abtastern
Das Etikett ist am Chassis/Gehäuse angebracht und besagt, dass sich die
Komponente Laserstrahlen bedient, die als Laserstrahlen der Klasse 1
klassifiziert wurden. Dies weist darauf hin, dass sich das Gerät Laserstrahlen
bedient, die einer schwächeren Klasse angehören. Das bedeutet, dass durch
den sehr schwachen Laserstrahl keine Gefahr durch gefährliche Strahlungen
außerhalb des Geräts besteht.
Markering op produkten die laserstralen gebruiken
Dit label is aangebracht op de behuizing/houder en toont dat de component
een laserstraal gebruikt die als Klasse 1 is geclassificeerd. Dit betekent dat de
laserstraal relatief zwak is en er geen gevaar van straling buiten het toestel is.
Etichetta per i prodotti che impiegano raggi laser
L’etichetta si trova sul rivestimento o sulla scatola e serve ad avvertire che il
componente impiega raggi laser che sono stati classificati come classe 1. Ciò
significa che l’apparecchio utilizza raggi laser di una classe inferiore. Non c’è
alcun pericolo di radiazioni pericolose all’esterno dell’apparecchio.
La marca para los productos que utilizan láser
Esta etiqueta está colocada en el chasis e indica que el componente funciona
con rayos láser de clase1. Esto significa que el aparato utiliza rayos láser
considerados como de clase débil. No existe el peligro de que este aparato
emita al exterior una radiación peligrosa.
Declaration of Conformity with regard to the R&TTE
Directive 1999/5/EC
Declaration of Conformity with regard to the EMC
Directive 2004/108/EC
Declaration of Conformity with regard to the RoHS
Directive 2011/65/EU
Manufacturer:
JVC KENWOOD Corporation
3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa,
221-0022, Japan
EU Representative:
JVCKENWOOD NEDERLAND B.V.
Amsterdamseweg 37, 1422 AC UITHOORN, The Netherlands
Conformiteitsverklaring met betrekking tot de R&TTErichtlijn van de Europese Unie (1999/5/EC)
Conformiteitsverklaring met betrekking tot de EMC-richtlijn
van de Europese Unie (2004/108/EC)
Conformiteitsverklaring met betrekking tot de RoHS richtlijn
van de Europese Unie (2011/65/EU)
Fabrikant:
JVC KENWOOD Corporation
3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa,
221-0022, Japan
EU-vertegenwoordiger:
JVCKENWOOD NEDERLAND B.V.
Amsterdamseweg 37, 1422 AC UITHOORN, Nederland
Déclaration de conformité vis à vis de la Directive
1999/5/CE de R&TTE
Déclaration de conformité se rapportant à la directive
EMC 2004/108/EC
Déclaration de conformité se rapportant à la directive
RoHS 2011/65/EU
Fabricant:
JVC KENWOOD Corporation
3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa,
221-0022, Japan
Représentants dans l’UE:
JVCKENWOOD NEDERLAND B.V.
Amsterdamseweg 37, 1422 AC UITHOORN, The Netherlands
Dichiarazione di conformità alla Direttiva R & TTE
1999/5/CE
Dichiarazione di conformità relativa alla direttiva EMC
2004/108/CE
Dichiarazione di conformità relativa alla direttiva RoHS
2011/65/EU
Produttore:
JVC KENWOOD Corporation
3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa,
221-0022, Japan
Rappresentante UE:
JVCKENWOOD NEDERLAND B.V.
Amsterdamseweg 37, 1422 AC UITHOORN, The Netherlands
Konformitätserklärung in Bezug auf die R&TTE-Vorschrift
1999/5/EC
Konformitätserklärung in Bezug auf die EMC-Vorschrift
2004/108/EC
Konformitätserklärung in Bezug auf die RoHS-Vorschrift
2011/65/EU
Hersteller:
JVC KENWOOD Corporation
3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa,
221-0022, Japan
EU-Vertreter:
Kenwood Electronics Europe BV
Amsterdamseweg 37, 1422 AC UITHOORN, Niederlande
Declaración de conformidad con respecto a la Directiva
R&TTE 1999/5/CE
Declaración de conformidad con respecto a la Directiva
EMC 2004/108/CE
Declaración de conformidad con respecto a la Directiva
RoHS 2011/65/EU
Fabricante:
JVC KENWOOD Corporation
3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa,
221-0022, Japan
Representante en la UE:
JVCKENWOOD NEDERLAND B.V.
Amsterdamseweg 37, 1422 AC UITHOORN, Países Bajos
iii
JS_KWD_KDC_BT48DAB_EWE0_03_EN.indd iii
Data Size:
Book Size:
B6L (182 mm x 128 mm)
B6L (182 mm x 128 mm)
5/12/2013 10:45:37 AM
English
Hereby, JVC KENWOOD declares that this unit
KDC-BT48DAB is in compliance with the essential
requirements and other relevant provisions of
Directive 1999/5/EC.
Italiano
Con la presente JVC KENWOOD dichiara che questo
KDC-BT48DAB è conforme ai requisiti essenziali
ed alle altre disposizioni pertinenti stabilite dalla
direttiva 1999/5/CE.
Svenska
Härmed intygar JVC KENWOOD att denna
KDC-BT48DAB stär l överensstämelse med de
väsentliga egenskapskrav och övriga relevanta
bestämmelser som framgår av direktiv 1999/5/EG.
Eesti
Sellega kinnitab JVC KENWOOD, et see
KDC-BT48DAB vastab direktiivi 1999/5/EC
põhilistele nõudmistele ja muudele asjakohastele
määrustele.
Français
Par la présente JVC KENWOOD déclare que l’appareil
KDC-BT48DAB est conforme aux exigences
essentielles et aux autres dispositions pertinentes
de la directive 1999/5/CE.
Par la présente, JVC KENWOOD déclare que
ce KDC-BT48DAB est conforme aux exigences
essentielles et aux autres dispositions de la directive
1999/5/CE qui lui sont applicables.
Español
Por medio de la presente JVC KENWOOD declara
que el KDC-BT48DAB cumple con los requisitos
esenciales y cualesquiera otras disposiciones
aplicables o exigibles de la Directiva 1999/5/CE.
Suomi
JVC KENWOOD vakuuttaa täten että KDC-BT48DAB
tyyppinen laite on direktiivin 1999/5/EY oleellisten
vaatimusten ja sitä koskevien direktiivin muiden
ehtojen mukainen.
Latviešu
Ar šo, JVC KENWOOD, apstiprina, ka KDC-BT48DAB
atbilst Direktīvas 1999/5/EK galvenajām prasībām
un citiem tās nosacījumiem.
Português
JVC KENWOOD declara que este KDC-BT48DAB está
conforme com os requisitos essenciais e outras
disposições da Directiva 1999/5/CE.
Slovensko
S tem JVC KENWOOD izjavlja, da je ta KDC-BT48DAB
v skladu z osnovnimi zahtevami in ostalimi
ustreznimi predpisi Direktive 1999/5/EC.
Deutsch
Hiermit erklärt JVC KENWOOD, dass sich dieser
KDC-BT48DAB in Übereinstimmung mit den
grundlegenden Anforderungen und den anderen
relevanten Vorschriften der Richtlinie 1999/5/EG
befindet. (BMWi)
Hiermit erklärt JVC KENWOOD die Übereinstimmung
des Gerätes KDC-BT48DAB mit den grundlegenden
Anforderungen und den anderen relevanten
Festlegungen der Richitlinie 1999/5/EG. (Wien)
Polska
JVC KENWOOD niniejszym oświadcza, że
KDC-BT48DAB spełnia zasadnicze wymogi oraz inne
istotne postanowienia dyrektywy 1999/5/EC.
Slovensky
Spoločnosť JVC KENWOOD týmto vyhlasuje, že
KDC-BT48DAB spĺňa zákldné požiadavky a ďalšie
prislušné ustanovenia Direktĺvy 1999/5/EC.
Malti
Hawnhekk, JVC KENWOOD, jiddikjara li dan
KDC-BT48DAB jikkonforma mal-ħtiġijiet essenzjali
u ma provvedimenti oħrajn relevanti li hemm
fid-Dirrettiva 1999/5/EC.
Český
JVC KENWOOD tímto prohlašuje, že tento
KDC-BT48DAB je ve shode se základními požadavky
a dalšími príslušnými ustanoveními smernice
1999/5/ES.
Dansk
Undertegnede JVC KENWOOD erklærer harved,
at følgende udstyr KDC-BT48DAB overholder de
væsentlige krav og øvrige relevante krav i direktiv
1999/5/EF.
Українська
Компанія JVC KENWOOD заявляє, що цей виріб
KDC-BT48DAB відповідає ключовим вимогам
та іншим пов’язаним положенням Директиви
1999/5/EC.
Nederlands
Hierbij verklaart JVC KENWOOD dat het toestel
KDC-BT48DAB in overeenstemming is met de
essentiële eisen en de andere relevante bepalingen
van richtlijn 1999/5/EG.
Bij deze verklaat JVC KENWOOD dat deze
KDC-BT48DAB voldoet aan de essentiële eisen en
aan de overige relevante bepalingen van Richtlijn
1999/5/EC.
Magyar
Alulírott, JVC KENWOOD, kijelenti, hogy a jelen
KDC-BT48DAB megfelel az 1999/5/EC irányelvben
meghatározott alapvető követelményeknek és
egyéb vonatkozó előírásoknak.
Ελληνικά
ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ JVC KENWOOD ΔΗΛΩΝΕΙ ΟΤΙ
KDC-BT48DAB ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ
ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ
ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/EK.
Turkish
Bu vesileyle JVC KENWOOD, KDC-BT48DAB
ünitesinin, 1999/5/EC Direktifinin başlıca
gereksinimleri ve diğer ilgili hükümleri ile uyumlu
olduğunu beyan eder.
Lietuviškai
Šiuo, JVC KENWOOD, pareiškia, kad šis
KDC-BT48DAB atitinka pagrindinius Direktyvos
1999/5/EB reikalavimus ir kitas svarbias nuostatas.
iv
JS_KWD_KDC_BT48DAB_EWE0_02_EN.indd iv
Data Size:
Book Size:
B6L (182 mm x 128 mm)
B6L (182 mm x 128 mm)
25/11/2013 5:17:22 PM
CONTENTS
BEFORE USE
BEFORE USE
2
BASICS
3
GETTING STARTED
4
DIGITAL RADIO (DAB)
5
ANALOG RADIO
7
CD / USB / iPod
9
AUX
11
AhaTM RADIO
11
BLUETOOTH®
12
AUDIO SETTINGS
17
DISPLAY SETTINGS
18
MORE INFORMATION
18
TROUBLESHOOTING
19
SPECIFICATIONS
21
INSTALLATION /
CONNECTION
Warning
Do not operate any function that takes your attention away from safe driving.
Caution
Volume setting:
• Adjust the volume so that you can hear sounds outside the car to prevent accidents.
• Lower the volume before playing digital sources to avoid damaging the speakers by the sudden increase of
the output level.
General:
• Avoid using the USB device or iPod/iPhone if it might hinder safe driving.
• Make sure all important data has been backed up. We shall bear no responsibility for any loss of recorded
data.
• Never put or leave any metallic objects (such as coins or metal tools) inside the unit, to prevent a short
circuit.
• If a disc error occurs due to condensation on the laser lens, eject the disc and wait for the moisture to
evaporate.
Remote control (RC-406):
• Do not leave the remote control in hot places such as on the dashboard.
• The Lithium battery is in danger of explosion if replaced incorrectly. Replace it only with the same or
equivalent type.
• The battery pack or batteries shall not be exposed to excessive heat such as sunshine, fire or the like.
• Keep the battery out of reach of children and in its original packaging when not in used. Dispose of used
batteries promptly. If swallowed, contact a physician immediately.
Maintenance
23
How to read this manual
• Operations are explained mainly
using buttons on the faceplate.
• [XX] indicates the selected items.
• ( XX) indicates references are
available on the stated page.
Cleaning the unit: Wipe off dirt on the faceplate with a dry silicone or soft cloth.
Cleaning the connector: Detach the faceplate and clean the connector
gently with a cotton swab, being careful not to damage the connector.
Handling discs:
• Do not touch the recording surface of the disc.
Connector (on the reverse
• Do not stick tape etc. on the disc, or use a disc with tape stuck on it.
side of the faceplate)
• Do not use any accessories for the disc.
• Clean from the center of the disc and move outward.
• Clean the disc with a dry silicone or soft cloth. Do not use any solvents.
• When removing discs from this unit, pull them out horizontally.
• Remove burrs from the center hole and disc edge before inserting a disc.
2
JS_KWD_KDC_BT48DAB_EWE0_02_EN.indd 2
Data Size:
Book Size:
B6L (182 mm x 128 mm)
B6L (182 mm x 128 mm)
25/11/2013 5:17:22 PM
BASICS
Faceplate
Remote control (RC-406) (not supplied)
(However, this unit can be remotely controlled with an
optionally purchased remote control.)
Volume knob
(turn/press)
Display window
Remote sensor (Do not expose
to bright sunlight.)
Pull out the
insulation sheet
when using for the
first time.
Detach button
Attach
Detach
How to replace the battery
How to reset
Your preset
adjustments will also
be erased.
To
Do this (on the faceplate)
Do this (on the remote control)
Turn on the power
Press B SRC.
• Press and hold to turn off the power.
Press and hold SRC to turn off the power.
( Pressing SRC does not turn on the power. )
Adjust the volume
Turn the volume knob.
Press VOL or VOL .
Press ATT during playback to attenuate the sound.
• Press again to cancel.
Select a source
Press B SRC repeatedly.
Press SRC repeatedly.
Change the display
information
Press DISP SCRL repeatedly.
• Press and hold to scroll the current display information.
( not available )
ENGLISH |
JS_KWD_KDC_BT48DAB_EWE0_03_EN.indd 3
Data Size:
Book Size:
B6L (182 mm x 128 mm)
B6L (182 mm x 128 mm)
3
5/12/2013 4:34:50 PM
GETTING STARTED
3
Set the initial settings
1 Press B SRC to enter STANDBY.
2 Press the volume knob to enter [FUNCTION].
3 Turn the volume knob to make a selection (see the following table),
then press the knob.
4 Press and hold
1
to exit.
To return to the previous setting item or hierarchy, press
Cancel the demonstration
When you turn on the power (or after you reset the unit), the display
shows: “SEL LANGUAGE” “PRESS” “VOLUME KNOB”
1 Turn the volume knob to select [ENG] (English) or [RUS] (Russian), then
press the knob.
[ENG] is selected for the initial setup.
Then, the display shows: “CANCEL DEMO” “PRESS” “VOLUME KNOB”
2 Press the volume knob.
[YES] is selected for the initial setup.
3 Press the volume knob again.
“DEMO OFF” appears.
2
Set the clock
1
2
3
4
Press the volume knob to enter [FUNCTION].
Turn the volume knob to select [CLOCK], then press the knob.
Turn the volume knob to select [CLOCK ADJUST], then press the knob.
Turn the volume knob to make the settings, then press the knob.
Day Hour Minute
5 Turn the volume knob to select [CLOCK FORMAT], then press the knob.
6 Turn the volume knob to select [12H] or [24H], then press the knob.
7 Press and hold
to exit.
To return to the previous setting item or hierarchy, press
.
.
Default: XX
AUDIO CONTROL
SP SELECT
OFF/ 5/4/ 6 × 9/6/ OEM: Selects according to the speaker size (5 inches
or 4 inches, 6×9 inches or 6 inches) or OEM speakers for optimum
performance.
DISPLAY
EASY MENU
ON: Both display and button illumination change to white color when
entering [FUNCTION]. ; OFF: Both display and button illumination remain
as [COLOR SELECT] color. ( 18)
TUNER SETTING
DAB L-BAND
ON: Receives L-BAND ensemble during digital audio reception. ;
OFF: Cancels.
DAB ANT
POWER
ON: Supplies power to the DAB antenna. Selects when using the supplied
antenna. ; OFF: Does not supply power. Selects when using passive
antenna without booster. ( 25)
PRESET TYPE
NORMAL: Memorizes one station for each preset button in each band
(FM1/ FM2/ FM3/ MW/ LW/ DB1/ DB2/ DB3). ; MIX: Memorizes one station
for each preset button, regardless of the selected band.
SYSTEM
KEY BEEP
ON: Activates the keypress tone. ; OFF: Deactivates.
4
JS_KWD_KDC_BT48DAB_EWE0_03_EN.indd 4
Data Size:
Book Size:
B6L (182 mm x 128 mm)
B6L (182 mm x 128 mm)
5/12/2013 10:45:57 AM
GETTING STARTED
About DAB (Digital Audio Broadcasting)
SOURCE SELECT
AHA SRC
ON: Enables AHA in source selection. ;
OFF: Disables. ( 11)
BUILT-IN AUX
ON: Enables AUX in source selection. ;
OFF: Disables. ( 11)
RUSSIAN SET
Selects the display language
for [FUNCTION] menu and Tag
information (folder name, file name,
song title, artist name, album name) if
applicable.
OFF: Display language is English. ;
BКЛ: Display language is Russian.
P-OFF WAIT
Applicable only when the
demonstration mode is turned off.
Sets the duration when the unit will
automatically turns off (while in
standby mode) to save the battery.
20M: 20 minutes ; 40M: 40 minutes ;
60M: 60 minutes ;
WAIT TIME – – –: Cancels
CD READ
1: Automatically distinguishes between
audio file disc and music CD. ; 2: Forces
to play as an music CD. No sound can be
heard if an audio file disc is played.
F/W UPDATE
UPDATE SYSTEM / UPDATE BT/ UPDATE DAB1/
UPDATE DAB2
F/W UP xx.xx/
F/W UP xx.x.x/
F/W UP Vxxx
DIGITAL RADIO (DAB)
YES: Starts upgrading the firmware. ;
NO: Cancels (upgrading is not
activated).
For details on how to update the
firmware, see:
www.kenwood.com/cs/ce/
DAB is one of the digital radio broadcasting
systems available today. It can deliver
digital quality sound without any annoying
interference or signal distortion. Furthermore, it
can carry text, pictures and data.
In contrast to FM broadcast, where each
program is transmitted on its own frequency,
DAB combines several programs (called
“services”) to form one “ensemble.”
The “primary component” (main radio station)
is sometimes accompanied by a “secondary
component” which can contain extra programs
or other information.
Preparation:
1 Connect a DAB antenna to the DAB
antenna jack. ( 25)
2 Press B SRC to select DAB.
3 Press and hold
to start the Service
List update.
“LIST UPDATE” appears and update
starts. “UPDATED” appears when update
completes.
Updates take up to 3 minutes. No
interruption (such as traffic information) is
possible during updates.
• To cancel the Service List update: Press and
hold
again.
Start listening
1 Press B SRC to select DAB.
2 Press J BAND repeatedly (or press #FM+ on RC-406) to select DB1/ DB2/ DB3.
3 Press and hold S / T (or press and hold S / T (+) on RC-406) to search for an
ensemble.
4 Press S / T (or press S / T (+) on RC-406) to select an ensemble, service or
component to listen.
• To change the tuning method for S / T: Press K SEEK repeatedly.
AUTO1: Press S / T: Select an ensemble, service or component.
Press and hold S / T: Automatically search for an ensemble.
AUTO2: Press S / T: Search for a preset service.
MANUAL: Press S / T: Select an ensemble, service or component.
Press and hold S / T: Manually search for an ensemble.
ENGLISH |
JS_KWD_KDC_BT48DAB_EWE0_03_EN.indd 5
Data Size:
Book Size:
B6L (182 mm x 128 mm)
B6L (182 mm x 128 mm)
5
5/12/2013 10:45:58 AM
DIGITAL RADIO (DAB)
• To store a service: Press and hold one of the number buttons
(1 to 6).
• To select a stored service: Press one of the number buttons
(1 to 6) (or press one of the number buttons (1 to 6) on RC-406).
Select a service
to enter Service Search mode.
1 Press
2 Turn the volume knob or press J / K to select a service, then
press the knob.
(or using RC-406)
Press J / K to search for a service.
To cancel the Service Search mode, press
Replay
Press and hold K SEEK (or press K on RC-406).
“REPLAY MODE” appears and replay starts from the live position. You can replay
a certain length of time of the current service (depending on the audio bit rate).
During Replay...
• To pause or resume playback, press 6 IW (or press ENT IW on RC-406).
• To skip the current song backward/forward, press S / T (or press
S / T (+) on RC-406).
• To rewind/fast-forward, press and hold S / T (or press and hold
S / T (+) on RC-406).
• To exit from Replay and go to live, press and hold K SEEK (or press and hold
K on RC-406).
.
Select a service by name
to enter Service Search mode.
1 Press
2 Turn the volume knob quickly to enter Alphabet Search
mode.
3 Turn the volume knob or press S / T to select the
character to be searched for.
Press J / K to go to the previous/next page.
4 Press the volume knob to start searching.
5 Turn the volume knob to select a service, then press the knob.
To cancel the Alphabet Search mode, press
.
Other settings
1 Press the volume knob to enter [FUNCTION].
2 Turn the volume knob to make a selection (see the following table), then
press the knob.
3 Press and hold
to exit.
To return to the previous setting item or hierarchy, press
.
Default: XX
TUNER SETTING
AF SET
ON:
While listening to DAB...
Automatically switch to FM broadcasting the same program if the DAB signal becomes
weak. It will switch back to DAB sound when the signal becomes strong again.
While listening to FM...
Automatically switch to DAB source broadcasting the same program (if available). ;
OFF: Cancels.
TI
ON: Allows the unit to temporarily switch to Traffic Information. ; OFF: Cancels.
PTY SEARCH
Press the volume knob to enter PTY language selection. Turn the volume knob to
select the PTY language (ENGLISH/ FRENCH/ GERMAN), then press the knob.
Selects the available Program Type ( 7), then, press S / T to start.
6
JS_KWD_KDC_BT48DAB_EWE0_02_EN.indd 6
Data Size:
Book Size:
B6L (182 mm x 128 mm)
B6L (182 mm x 128 mm)
25/11/2013 5:17:23 PM
DIGITAL RADIO (DAB)
ASW SELECT
ANALOG RADIO
TRAVEL, WARNINGS, NEWS, WEATHER, EVENT, SPECIAL, RAD INFO, SPORTS,
FINANCE: Turn the volume knob to make a selection, then press the knob.
“ ” appears in front of the activated announcement type.
Automatically switch from any source to Digital radio ensembles broadcasting an
activated announcement type.
• Multiple announcement can be activated simultaneously.
• To deactivate, press the volume knob again (“ ” goes off).
*
*
LIST UPDATE
AUTO: Automatically update the DAB Service List when the power is turned on. ;
MANUAL: Updates the DAB Service List by pressing and holding
.
PTY WATCH
Automatically switch from any source to Digital Radio ensembles broadcasting a
selected type of program.
NEWS, AFFAIRS, INFO, SPORT, EDUCATE, DRAMA, CULTURE, SCIENCE,
VARIED, POP M (music), ROCK M (music), EASY M (music), LIGHT M (music),
CLASSICS, OTHER M (music), WEATHER, FINANCE, CHILDREN, SOCIAL,
RELIGION, PHONE IN, TRAVEL, LEISURE, JAZZ, COUNTRY, NATION M (music),
OLDIES, FOLK M (music), DOCUMENT
OFF: Cancels.
CLOCK
TIME SYNC
ON: Synchronizes the unit’s time to the Digital Radio signal station time. ;
OFF: Cancels.
• Available Program Type:
SPEECH: NEWS, AFFAIRS, INFO (information), SPORT, EDUCATE, DRAMA, CULTURE,
SCIENCE, VARIED, WEATHER, FINANCE, CHILDREN, SOCIAL, RELIGION, PHONE IN, TRAVEL,
LEISURE, DOCUMENT
MUSIC: POP M (music), ROCK M (music), EASY M (music), LIGHT M (music), CLASSICS,
OTHER M (music), JAZZ, COUNTRY, NATION M (music), OLDIES, FOLK M (music)
The unit will search for the Program Type categorized under [SPEECH] or [MUSIC]
if selected.
• If the volume is adjusted during reception of traffic information,
announcement or alarm, the adjusted volume is memorized automatically.
It will be applied the next time traffic information, announcement or alarm
function is turned on.
Search for a station
1 Press B SRC to select TUNER.
2 Press J BAND repeatedly (or press *AM– / #FM+ on RC-406)
to select FM1/ FM2/ FM3/ MW (or LW).
3 Press S / T (or press S / T (+) on RC-406) to search
for a station.
• To change the searching method for S / T: Press K SEEK
repeatedly.
AUTO1: Automatically search for a station.
AUTO2: Search for a preset station.
MANUAL: Manually search for a station.
• To store a station: Press and hold one of the number buttons
(1 to 6).
• To select a stored station: Press one of the number buttons
(1 to 6) (or press one of the number buttons (1 to 6) on RC-406).
Direct Access Tuning (using RC-406)
1 Press DIRECT to enter Direct Access Tuning.
2 Press the number buttons to enter a frequency.
3 Press ENT IW to search for a station.
• To cancel, press or DIRECT.
• If no operation is done for 10 seconds after step 2, Direct Access
Tuning is automatically canceled.
ENGLISH |
JS_KWD_KDC_BT48DAB_EWE0_03_EN.indd 7
Data Size:
Book Size:
B6L (182 mm x 128 mm)
B6L (182 mm x 128 mm)
7
5/12/2013 10:46:08 AM
ANALOG RADIO
Other settings
1 Press the volume knob to enter [FUNCTION].
2 Turn the volume knob to make a selection (see the following table),
then press the knob.
3 Press and hold
to exit.
To return to the previous setting item or hierarchy, press
.
Default: XX
TUNER SETTING
LOCAL SEEK
ON: Searches only FM stations with good reception. ; OFF: Cancels.
AUTO MEMORY
YES: Automatically starts memorizing 6 stations with good
reception. ; NO: Cancels. (Selectable only if [NORMAL] is selected for
[PRESET TYPE].) ( 4)
MONO SET
ON: Improves the FM reception, but the stereo effect may be lost. ;
OFF: Cancels.
NEWS SET
ON: The unit will temporarily switch to News Programme if available. ;
OFF: Cancels.
REGIONAL
ON: Switches to another station only in the specific region using the “AF”
control. ; OFF: Cancels.
AF SET
ON: Automatically searches for another station broadcasting the same
program in the same Radio Data System network with better reception
when the current reception is poor. ; OFF: Cancels.
TI*
ON: Allows the unit to temporarily switch to Traffic Information. ;
OFF: Cancels.
PTY SEARCH
Press the volume knob to enter PTY language selection. Turn the volume
knob to select the PTY language (ENGLISH/ FRENCH/ GERMAN), then
press the knob.
Selects the available Program Type (see the following), then, press
S / T to start.
• [LOCAL SEEK]/ [MONO SET]/ [NEWS SET]/ [REGIONAL]/ [AF SET]/ [PTY SEARCH] is
selectable only when the band is FM1/ FM2/ FM3.
• Available Program Type:
SPEECH: NEWS, AFFAIRS, INFO (information), SPORT, EDUCATE, DRAMA, CULTURE,
SCIENCE, VARIED, WEATHER, FINANCE, CHILDREN, SOCIAL, RELIGION, PHONE
IN, TRAVEL, LEISURE, DOCUMENT
MUSIC: POP M (music), ROCK M (music), EASY M (music), LIGHT M (music),
CLASSICS, OTHER M (music), JAZZ, COUNTRY, NATION M (music), OLDIES,
FOLK M (music)
The unit will search for the Program Type categorized under [SPEECH] or
[MUSIC] if selected.
• If the volume is adjusted during reception of traffic information, alarm
or news bulletin, the adjusted volume is memorized automatically. It
will be applied the next time traffic information, alarm or news bulletin
function is turned on.
* [TI] in MW/LW band is for enabling traffic interruption to DAB source
only.
8
JS_KWD_KDC_BT48DAB_EWE0_02_EN.indd 8
Data Size:
Book Size:
B6L (182 mm x 128 mm)
B6L (182 mm x 128 mm)
25/11/2013 5:17:24 PM
CD / USB / iPod
Start playback
The source changes automatically and playback
starts.
CD
Label side
M Eject disc
USB
USB input terminal
CA-U1EX (max.: 500 mA)
(optional accessory)
To
Do this
Pause or resume
playback
Press 6 IW (or press ENT IW on RC-406).
Select a track/file
Press S / T (or press S / T (+) on RC-406).
Select a folder *3
Press J / K (or press *AM– / #FM+ on RC-406).
Reverse/Fast-forward
Press and hold S / T (or press and hold S / T (+) on RC-406).
Repeat play *4
Press 4 repeatedly.
• Audio CD: TRACK REPEAT, REPEAT OFF
• MP3/WMA/AAC/WAV file or iPod: FILE REPEAT, FOLDER REPEAT,
REPEAT OFF
• KENWOOD Music Editor Light (KME Light)/ KENWOOD Music Control
(KMC) file ( 18): FILE REPEAT, REPEAT OFF
Random play *4
Press 3 repeatedly.
• Audio CD: DISC RANDOM, RANDOM OFF
• MP3/WMA/AAC/WAV file or iPod or KME Light/ KMC file:
FOLDER RANDOM, RANDOM OFF
and/ or
USB cable from the rear of the unit
iPod/iPhone
USB input terminal
Press and hold 3 and/ or
USB cable from the rear of the unit
KCA-iP102 (optional accessory) or
accessory cable of the iPod/iPhone*1
Press 5 iPod to select the control mode while
in iPod source.
MODE ON: From the iPod*2.
MODE OFF: From the unit.
*1
*2
*3
*4
*5
to select “ALL RANDOM”. *5
Do not leave the cable inside the car when not using.
You can still play/pause, file skip, fast-forward or reverse files from the unit.
Only for MP3/WMA/AAC/WAV files. This does not work for iPod.
For iPod: Applicable only when [MODE OFF] is selected.
For CD: Only for MP3/WMA/AAC files.
If you connect the iPod/iPhone to the USB input terminal of the unit (while listening to TuneIn
Radio, TuneIn Radio Pro or Aupeo), the unit will output the sound from these apps.
ENGLISH |
JS_KWD_KDC_BT48DAB_EWE0_03_EN.indd 9
Data Size:
Book Size:
B6L (182 mm x 128 mm)
B6L (182 mm x 128 mm)
9
5/12/2013 10:46:14 AM
CD / USB / iPod
Select a track/file from a list
For iPod: Applicable only when [MODE OFF] is
selected. ( 9)
1 Press
.
2 Turn the volume knob to make a selection,
then press the knob.
• MP3/WMA/AAC/WAV file: Select the
desired folder, then a file.
• iPod or KME Light/ KMC file: Select the
desired file from the list (PLAYLISTS,
ARTISTS, ALBUMS, SONGS, PODCASTS*,
GENRES, COMPOSERS*).
* Only for iPod.
• To return to the root folder (or first file), press
number button 5 iPod.
• To return to the previous setting item or
hierarchy, press
.
• To cancel, press and hold
.
If you have many files....
You can search through them quickly (on step 2
above) at a preset skip search ratio by pressing
S / T.
• See also “Set the skip search ratio.”
• Pressing and holding S / T skip songs at
the maximum ratio (10%) regardless of the
setting made.
• For USB: Only for files registered in the
database created with KME Light/ KMC.
• Not applicable for audio CD.
Direct Music Search (using RC-406)
1 Press DIRECT.
2 Press the number buttons to enter a track/
file number.
3 Press ENT IW to search for music.
• To cancel, press .
• Not available if Random Play is selected.
• Not applicable for iPod, KME Light/ KMC file.
Select a song by name
While listening to iPod...
1 Press
.
2 Turn the volume knob to select a category,
then press the knob.
3 Turn the volume knob quickly to enter
character search.
4 Turn the volume knob to select the
character to be searched for.
5 Press S / T to move to the entry
position.
You can enter up to 3 characters.
6 Press the volume knob to start searching.
7 Turn the volume knob to make a selection,
then press the knob.
Repeat step 7 until the desired item is
selected.
• To search for a character other than A to Z
and 0 to 9, enter only “ ”.
• To return to the previous hierarchy, press
.
• To return to the top menu, press number
button 5 iPod.
• To cancel, press and hold
.
*
Set the skip search ratio
While listening to iPod or KME Light/ KMC file...
1 Press the volume knob to enter [FUNCTION].
2 Turn the volume knob to select [USB], then
press the knob.
3 Turn the volume knob to select
[SKIP SEARCH], then press the knob.
4 Turn the volume knob to make a selection,
then press the knob.
0.5% (default)/ 1%/ 5%/ 10%: Skip search
ratio over the total files.
5 Press and hold
to exit.
Change the USB drive
When a smartphone (Mass Storage Class) is
connected to the USB input terminal, you can
select its internal memory or external memory
(such as an SD card) to playback the stored songs.
You can also select the desired drive to playback
when a multiple drives device is connected.
Press 5 iPod repeatedly to select the desired
drive.
(or)
1 Press the volume knob to enter [FUNCTION].
2 Turn the volume knob to select [USB], then
press the knob.
3 Turn the volume knob to select
[MUSIC DRIVE], then press the knob.
4 Press the volume knob to select
[DRIVE CHANGE].
The next drive is selected automatically.
Repeat steps 1 to 4 to select the following
drives.
Selectable items: [DRIVE 1] to [DRIVE 5]
10
JS_KWD_KDC_BT48DAB_EWE0_02_EN.indd 10
Data Size:
Book Size:
B6L (182 mm x 128 mm)
B6L (182 mm x 128 mm)
25/11/2013 5:17:24 PM
AUX
AhaTM RADIO
Preparation:
Select [ON] for [BUILT-IN AUX]. ( 5)
Preparation:
Install the latest version of AhaTM
application onto your device (iPhone/
iPod touch), then create an account and
log in to AhaTM.
• Select [ON] for [AHA SRC]. ( 5)
Start listening
1 Connect a portable audio player
(commercially available).
Auxiliary input jack
Start listening
1 Open the AhaTM application on your
device.
2 Connect your device to the USB
input terminal.
3.5 mm stereo mini plug with “L”
shaped connector (commercially
available)
Portable audio
player
2 Press B SRC to select AUX.
3 Turn on the portable audio player and
start playback.
Set the AUX name
While listening to a portable audio player
connected to the unit...
1 Press the volume knob to enter
[FUNCTION].
2 Turn the volume knob to select [SYSTEM],
then press the knob.
3 Turn the volume knob to select
[AUX NAME SET], then press the knob.
4 Turn the volume knob to make a
selection, then press the knob.
AUX (default)/ DVD/ PORTABLE/ GAME/ VIDEO/
TV
5 Press and hold
to exit.
USB input terminal
and/ or
USB cable from the rear of the unit
KCA-iP102 (optional accessory) or
accessory cable of the iPod/iPhone*
The source changes to AHA FRONT/
AHA REAR and broadcast starts.
* Do not leave the cable inside the car
when not using.
To
Do this
Pause or resume
playback
Select a content
Press 6 IW (or press
ENT IW on RC-406).
Press S / T (or press
S / T (+) on RC-406).
Press and hold T.
Forward 30 seconds
of a content*1
Backward 15 seconds
of a content*1
“Likes” current
content*2
“Dislikes” current
content*2
Press and hold S.
Press J .
• To unvote, press J again.
Press K .
• To unvote, press K again.
*1 Applicable to audiobook and podcast only.
*2 Not applicable to audiobook and Location Based
Stations (LBS).
Search for a station
.
1 Press
2 Turn the volume knob to select a station, then
press the knob.
3 Turn the volume knob to the desired content,
then press the knob.
(or using RC-406)
Press J / K to search for a station.
To cancel, press and hold
.
You can make a call when your device is connected to
the unit via Bluetooth connection ( 12)...
• To call a number in the content*: Press 1, then press
the volume knob to call.
• To end or disconnect a call: Press .
* The availability is depending on the selected station.
ENGLISH |
JS_KWD_KDC_BT48DAB_EWE0_02_EN.indd 11
Data Size:
Book Size:
B6L (182 mm x 128 mm)
B6L (182 mm x 128 mm)
11
29/11/2013 9:36:50 AM
BLUETOOTH®
You can operate Bluetooth devices using this unit.
Connect the microphone
MIC (Microphone input terminal)
Microphone (supplied)
Rear panel
Adjust the microphone
angle
Secure using cord clamps (not
supplied) if necessary.
If you turn off the unit or detach the control panel
during a phone call conversation, the Bluetooth
connection is disconnected. Continue the
conversation using your mobile phone.
Supported Bluetooth profiles
– Hands-Free Profile (HFP)
– Serial Port Profile (SPP)
– Phonebook Access Profile (PBAP)
– Object Push Profile (OPP)
– Advanced Audio Distribution Profile (A2DP)
– Audio/Video Remote Control Profile (AVRCP)
Pair a Bluetooth device
When connecting a Bluetooth device to
the unit for the first time, perform pairing
between the unit and the device. Once the
pairing is completed, the Bluetooth device
will remain registered in the unit even if you
reset the unit.
• Up to five devices can be registered (paired)
in total.
• A maximum of two Bluetooth phones
and one Bluetooth audio device can be
connected at any time.
• This unit supports Secure Simple Pairing
(SSP).
• Some Bluetooth devices may not
automatically connect to the unit after
pairing. Connect the device to the unit
manually. Refer to the instruction manual of
the Bluetooth device for more information.
1 Press B SRC to turn on the unit.
2 Search and select this unit model name
(KDC-BT4*DAB) on the Bluetooth device.
“PAIRING” “PASS XXXXXX” Device
name “PRESS” “VOLUME KNOB”
scrolls on the display.
3 Press the volume knob to start pairing.
“PAIRING OK” appears when pairing is
completed and “ ” will light up when the
Bluetooth connection is established.
• For some Bluetooth devices, you may need
to enter the Personal Identification Number
(PIN) code immediately after searching.
• Pairing request (via Bluetooth) is
automatically activated if an iPhone/iPod
touch is connected through the USB input
terminal. (Applicable only if [AUTO PAIRING] is
set to [ON].) ( 16)
Press the volume knob to pair once you
have confirm the device name.
Bluetooth test mode
You can check the connectivity of the
supported profile between the Bluetooth
device and the unit.
• Make sure there is no Bluetooth device
connected.
1 Press and hold .
“PLEASE PAIR YOUR PHONE” appears.
2 Search and select this unit model name
(KDC-BT4*DAB) on the Bluetooth device.
3 Operate the Bluetooth device to confirm
pairing.
“TESTING” flashes on the display.
The connectivity result (OK or NG) appears
after the test.
PAIRING: Pairing status
HF CNT: Hands-Free Profile (HFP)
compatibility
AUD CNT: Advanced Audio Distribution
Profile (A2DP) compatibility
PB DL:
Phonebook Access profile (PBAP)
compatibility
• To cancel check mode, press and hold
B SRC to turn off the unit.
12
JS_KWD_KDC_BT48DAB_EWE0_02_EN.indd 12
Data Size:
Book Size:
B6L (182 mm x 128 mm)
B6L (182 mm x 128 mm)
25/11/2013 5:17:24 PM
BLUETOOTH®
Bluetooth mobile phone
Improve the sound quality during a call
To
Do this
Receive a call
Press
or the volume knob or one of
the number buttons (1 to 6) (or press
on RC-406).
• All the buttons and display
illumination flash when there is an
incoming call.
During a call, the buttons and display
illuminate according to the settings
made for [DISPLAY]. ( 18)
• When [AUTO ANSWER] is set to the
selected time, the unit answers
incoming call automatically. ( 14)
Reject an incoming
call
Press B SRC (or press
End a call
Press
or B SRC (or press
RC-406).
on RC-406).
on
Switch between
hands-free and
private talk modes
Press 6 IW during a call.
• Operations may vary according to the
connected Bluetooth device.
Adjust the phone
volume
Turn the volume knob during a call.
Phone volume: [00] to [35] (Default: [15])
• This adjustment will not affect the
volume of the other sources.
Switch between two
connected phones
Press
repeatedly.
• Not applicable during a call.
While talking on the phone...
1 Press the volume knob to enter [FUNCTION].
2 Turn the volume knob to make a selection (see the following table), then
press the knob.
3 Press and hold
to exit.
To return to the previous setting item or hierarchy, press
.
Default: XX
MIC GAIN
–20 — +8 (0): The sensitivity of the microphone increases as the number
increased.
NR LEVEL
–5 — –20 (–10): Adjust the noise reduction level until the least noise is being
heard during a phone conversation.
ECHO CANCEL
1 — 10 (4): Adjust the echo cancellation delay time until the least echo is being
heard during a phone conversation.
Text message notification
When the phone receives a text message, the unit rings and “SMS RECEIVED”
appears.
• You cannot read, edit, or send a message through the unit.
• To clear the message, press any button.
Use Voice Recognition
1 Press and hold .
The connected phone (which has been paired the earliest) is activated.
However, if priority device is connected, pressing and holding
activate the
priority device. ( 15, DVC PRIORITY)
2 Speak the name of the contact you want to call or the voice command to
control the phone functions.
• Supported Voice Recognition features vary for each phone. Refer to the
instruction manual of the connected phone for details.
• This unit also supports the intelligent personal assistant function of iPhone.
ENGLISH |
JS_KWD_KDC_BT48DAB_EWE0_02_EN.indd 13
Data Size:
Book Size:
B6L (182 mm x 128 mm)
B6L (182 mm x 128 mm)
13
29/11/2013 9:38:24 AM
BLUETOOTH®
Bluetooth mode operations
1 Press to enter Bluetooth mode.
2 Turn the volume knob to make a selection (see the following table),
then press the knob.
3 Press and hold
to exit.
To return to the previous setting item or hierarchy, press
CALL
HISTORY
PHONE
BOOK
NUMBER
DIAL
.
1 Press the volume knob to select a name or a phone number.
• “INCOMING”, “OUTGOING”, or “MISSED” is shown on the lower part of the
display to indicate the previous call status.
• Press DISP SCRL to change the display category (NUMBER or NAME).
• “NO DATA” appears if there is no recorded call history.
2 Press the volume knob to call.
1 Turn the volume knob to select a name, then press the knob.
2 Turn the volume knob to select a phone number, then press the knob to
call.
• If the phone supports PBAP, the phonebook of the connected phone is
automatically transferred to the unit when pairing. If the phone does not
support PBAP, “TRANSFER PB” appears. Transfer the phonebook manually.
( 16, TRANSFER PB)
• Contacts are categorized as: HOME, OFFICE, MOBILE, OTHER, GENERAL
• This unit can display only non-accent letters. (Accent letters such as “Ú” is
showns as “U”.)
• If the phonebook contains many contacts, ( Select a contact by name).
1 Turn the volume knob to select a number (0 to 9) or character ( , #, +).
2 Press S / T to move the entry position.
Repeat steps 1 and 2 until you finish entering the phone number.
3 Press the volume knob to call.
(or using RC-406)
1 Press the number buttons (0 to 9) to enter the phone number.
2 Press to call.
VOICE
Speak the name of the contact you want to call or use the voice command
to control the phone functions. ( 13, Use Voice Recognition)
BATT*
LOW/ MID/ FULL: Shows the strength of the battery.
SIGNAL*
NO SIGNAL/ LOW/ MID/ MAX: Shows the strength of the current
received signal.
SETTINGS
Default: XX
AUTO ANSWER
1 — 30: The unit answer incoming call automatically in the selected
time. ; OFF: Cancels.
RING MODE
SYSTEM: The unit rings to notify you when a call/text message comes in.
(Default ring tone is different according to the paired device.)
• CALL: Selects your preferred ring tone (TONE 1 — 5) for incoming
calls.
• MESSAGE: Selects your preferred ring tone (TONE 1 — 5) for
incoming text messages.
PHONE: The unit uses the connected phones’ ring tone to notify you
when a call/text message comes in. (The connected phone will ring if it
does not support this feature.)
SMS NOTIFY*
ON: The unit rings and “SMS RECEIVED” appears to notify you of an
incoming text message. ; OFF: Cancels.
* Functionality depends on the type of the phone used.
Select a contact by name
• You can search through the contacts quickly according to the first letter
(A to Z), number (0 to 9), or symbol.
• The second alphabet of the contact will be searched if the first alphabet
does not exist.
1 Press to enter Bluetooth mode.
2 Turn the volume knob to select [PHONE BOOK], then press the knob.
14
JS_KWD_KDC_BT48DAB_EWE0_06_EN.indd 14
Data Size:
Book Size:
B6L (182 mm x 128 mm)
B6L (182 mm x 128 mm)
17/12/2013 3:14:51 PM
BLUETOOTH®
3 Turn the volume knob quickly to enter alphabet search mode.
The first menu (ABCDEFGHIJK) appears. To go to the other menu
(LMNOPQRSTUV or WXYZ1 ), press J / K.
4 Turn the volume knob or press S / T to select the desired first
letter, then press the knob.
• To search with numbers, select “1”.
• To search with symbols, select “ ”.
5 Turn the volume knob to select a name, then press the knob.
6 Turn the volume knob to select a phone number, then press the
knob to call.
To return to the previous hierarchy, press
.
Store a contact in memory
You can store up to 6 contacts.
1 Press to enter Bluetooth mode.
2 Turn the volume knob to select [CALL HISTORY], [PHONE BOOK], or
[NUMBER DIAL], then press the knob.
3 Turn the volume knob to select a contact or enter a phone number.
If a contact is selected, press the volume knob to show the phone
number.
4 Press and hold one of the number buttons (1 to 6).
“STORED” appears when the contact is stored.
To erase a contact from the preset memory, select [NUMBER DIAL] in
step 2 and store a blank number.
Make a call from memory
1 Press to enter Bluetooth mode.
2 Press one of the number buttons (1 to 6).
3 Press the volume knob to call.
Delete a contact
Not applicable for mobile phone that supports PBAP.
1 Press to enter Bluetooth mode.
2 Turn the volume knob to select [CALL HISTORY] or [PHONE BOOK], then
press the knob.
3 Turn the volume knob to select a contact.
If a contact is selected, press the volume knob to show the phone
number.
4 Press and hold the volume knob to enter delete mode.
5 Turn the volume knob to select [DELETE ONE] or [DELETE ALL], then
press the knob.
DELETE ONE: Selected name or phone number in step 3 is deleted.
DELETE ALL: All names or phone numbers from the selected menu in
step 2 is deleted.
6 Turn the volume knob to select [YES] or [NO], then press the knob.
Bluetooth mode settings
1 Press the volume knob to enter [FUNCTION].
2 Turn the volume knob to select [BT MODE], then press the knob.
3 Turn the volume knob to make a selection (see the following table),
then press the knob.
4 Press and hold
to exit.
To return to the previous setting item or hierarchy, press
PHONE SELECT
AUDIO SELECT
.
Default: XX
Selects the phone or audio device to connect or disconnect.
“ ” appears in front of the device name.
DEVICE DELETE
1 Turn the volume knob to select a device to delete, then press the
knob.
2 Turn the volume knob to select [YES] or [NO], then press the knob.
DVC PRIORITY
Selects a device to be connected as priority device.
“ ” appears in front of the device name set as priority.
“NO MEMORY” appears if there is no contacts stored.
ENGLISH |
JS_KWD_KDC_BT48DAB_EWE0_07_EN.indd 15
Data Size:
Book Size:
B6L (182 mm x 128 mm)
B6L (182 mm x 128 mm)
15
23/12/2013 5:09:30 PM
BLUETOOTH®
TRANSFER PB*
PIN CODE EDIT
(0000)
RECONNECT
AUTO PAIRING
“DL PB
” appears and transfer the
phonebook of the connected phone to
this unit manually.
* Selectable only when the connected
phone supports OPP.
Changes the PIN code (up to 6 digits).
1 Turn the volume knob to select a
number.
2 Press S / T to move the entry
position.
Repeat steps 1 and 2 until you finish
entering the PIN code.
3 Press the volume knob to confirm.
ON: The unit automatically reconnect
when the Bluetooth device is within
range. ; OFF: Cancels.
ON: The unit automatically pair
supported Bluetooth device (iPhone/
iPod touch) when it is connected
through USB input terminal. Depending
on the iOS version of the connected
iPhone/iPod touch, this function may
not work. ; OFF: Cancels.
BT HF/AUDIO
FRONT: Ouputs audio from the front left
and right speakers. ; ALL: Outputs audio
from all the speakers.
INITIALIZE
YES: Initializes all the Bluetooth settings
(including stored pairing, phonebook,
and etc.). ; NO: Cancels.
Internet radio via Bluetooth
Bluetooth audio player
Listen to AhaTM Radio
Preparation:
Select [ON] for [AHA SRC]. ( 5)
You can listen to AhaTM Radio on your smart
phone (Android OS) through Bluetooth on
this unit.
1 Open the AhaTM application on your
smart phone.
2 Connect your smart phone via
Bluetooth connection. ( 12)
3 Press B SRC to select AHA.
The source switches and broadcast
starts automatically.
• You can operate AhaTM Radio in the same
way as AhaTM Radio for iPod/iPhone. ( 11)
• To call a number in the content*: Press 1,
then press the volume knob to call.
• To end or disconnect a call: Press .
* The availability is depending on the
selected station.
Operations and display indications may differ
according to their availability on the connected
device.
To
Do this
Playback
1 Press B SRC (or press SRC on
RC-406) to select BT AUDIO.
2 Operate the Bluetooth audio
player to start playback.
Pause or
resume
playback
Press 6 IW (or press ENT IW
on RC-406).
Select group
or folder
Press J / K (or press *AM– /
#FM+ on RC-406).
Reverse/
forward skip
Press S / T (or press
S / T (+) on RC-406).
Reverse/fastforward
Press and hold S / T (or
press and hold S / T (+) on
RC-406).
Repeat play
Press 4 repeatedly to make a
selection.
ALL REPEAT, FILE REPEAT,
REPEAT OFF
Random
play
Press 3 repeatedly to make a
selection.
FOLDER RANDOM, RANDOM OFF
Press and hold 3 to select
“ALL RANDOM.”
16
JS_KWD_KDC_BT48DAB_EWE0_07_EN.indd 16
Data Size:
Book Size:
B6L (182 mm x 128 mm)
B6L (182 mm x 128 mm)
23/12/2013 5:09:31 PM
AUDIO SETTINGS
While listening to any source...
1 Press the volume knob to enter [FUNCTION].
2 Turn the volume knob to select [AUDIO CONTROL], then press the
knob.
3 Turn the volume knob to make a selection (see the following table),
then press the knob.
Repeat step 3 until the desired item is selected or activated.
4 Press and hold
to exit.
(or using RC-406)
1 Press AUD to enter [AUDIO CONTROL].
2 Press J / K to make a selection, then press ENT IW.
LOUDNESS
LEVEL1/ LEVEL2: Selects your preferred low and high frequencies boost
to produce a well-balanced sound at a low volume level. ; OFF: Cancels.
SUBWOOFER SET
ON: Turns on the subwoofer output. ; OFF: Cancels.
LPF SUBWOOFER
THROUGH: All signals are sent to the subwoofer. ; 85HZ/ 120HZ/
160HZ: Audio signals with frequencies lower than 85 Hz/ 120 Hz/
160 Hz are sent to the subwoofer.
SUB-W PHASE
REVERSE (180°)/ NORMAL (0°): Selects the phase of the subwoofer
output to be in line with the speaker output for optimum performance.
(Selectable only if a setting other than [THROUGH] is selected for
[LPF SUBWOOFER].)
HPF
THROUGH: All signals are sent to the speakers. ; 100HZ/ 120HZ/
150HZ: Audio signals with frequencies higher than 100 Hz/ 120 Hz/
150 Hz are sent to the speakers.
SUB-W LEVEL –15 to +15 (0) Adjusts the subwoofer output level.
FADER
R15 to F15 (0): Adjusts the rear and front speaker output balance.
BAND1 LEVEL –8 to +8 (+5):
BALANCE
L15 to R15 (0): Adjusts the left and right speaker output balance.
BAND2 LEVEL –8 to +8 (+5):
VOLUME OFFSET
(Default: 0)
–8 to +8 (for AUX) ; –8 to 0 (for other sources): Presets the volume
adjustment level of each source. (Before adjustment, select the source
you want to adjust.)
SOUND RECNSTR
(Sound
reconstruction)
ON: Creates realistic sound by compensating the high-frequency
components and restoring the rise-time of the waveform that are lost in
audio data compression. ; OFF: Cancels.
To return to the previous setting item or hierarchy, press
.
Default: XX
BAND3 LEVEL –8 to +8 (+4):
BAND4 LEVEL –8 to +8 (+5):
Adjusts the level to memorize for each source. (Before
making an adjustment, select the source you want to
adjust.)
BAND5 LEVEL –8 to +8 (+1):
PRESET EQ
DRIVE EQ/ TOP40/ POWERFUL/ ROCK/ POPS/ EASY/ JAZZ/ NATURAL/
USER: Selects a preset equalizer suitable to the music genre. (Select [USER]
to use the customized BAND1 to BAND5 settings.)
[DRIVE EQ] is a preset equalizer that reduces noise from the road.
BASS BOOST
LEVEL1/ LEVEL2/ LEVEL3: Selects your preferred bass boost level. ;
OFF: Cancels.
[SUB-W LEVEL]/ [LPF SUBWOOFER]/ [SUB-W PHASE] is selectable only if
[SUBWOOFER SET] is set to [ON].
ENGLISH |
JS_KWD_KDC_BT48DAB_EWE0_02_EN.indd 17
Data Size:
Book Size:
B6L (182 mm x 128 mm)
B6L (182 mm x 128 mm)
17
25/11/2013 5:17:25 PM
DISPLAY SETTINGS
MORE INFORMATION
1 Press the volume knob to enter [FUNCTION].
2 Turn the volume knob to select [DISPLAY], then press the knob.
3 Turn the volume knob to make a selection (see the following table),
General
then press the knob.
Repeat step 3 until the desired item is selected or activated.
4 Press and hold
to exit.
To return to the previous setting item or hierarchy, press
.
Default: XX
COLOR SELECT
VARIABLE SCAN/ COLOR 01 — COLOR 24/ USER: Selects your preferred
key and display illumination color.
You can create your own color (when [COLOR 01] — [COLOR 24] or
[USER] is selected). The color you have created can be selected when you
select [USER].
1 Press and hold the volume knob to enter the detailed color adjustment.
2 Press S / T to select the color (R/ G/ B) to adjust.
3 Turn the volume knob to adjust the level (0 — 9), then press the
knob.
DIMMER
ON: Dims the display and button illumination. ; OFF: Illuminates according
to the [BRIGHTNESS] settings.
BRIGHTNESS
0 — 31: Selects your preferred brightness level for display and button
illumination.
TEXT SCROLL
AUTO/ ONCE: Selects whether to scroll the display information
automatically, or scroll only once. ; OFF: Cancels.
• This unit can only play the following CDs:
• Detailed information and notes about the playable audio files are stated in an online manual
on the following web site: www.kenwood.com/cs/ce/audiofile/
Playable files
• Playable audio file: MP3 (.mp3), WMA (.wma), AAC (.m4a)
• Playable disc media: CD-R/CD-RW/CD-ROM
• Playable disc file format: ISO 9660 Level 1/2, Joliet, Long file name.
• Playable USB device file system: FAT12, FAT16, FAT32
Even when audio files comply with the standards listed above, playback may be impossible
depending on the types or conditions of media or device.
Unplayable discs
•
•
•
•
Discs that are not round.
Discs with coloring on the recording surface or discs that are dirty.
Recordable/ReWritable discs that have not been finalized.
8 cm CD. Attempting to insert using an adapter may cause malfunction.
About USB devices
•
•
•
•
This unit can play MP3/WMA/AAC/WAV files stored on a USB mass storage class device.
You cannot connect a USB device via a USB hub.
Connecting a cable whose total length is longer than 5 m may result in abnormal playback.
This unit cannot recognize a USB device whose rating is other than 5 V and exceeds 1 A.
About KENWOOD Music Editor Light and KENWOOD Music
Control
• This unit supports the PC application KENWOOD Music Editor Light and Android™ application
KENWOOD Music Control.
• When you play audio files with song data added using the KENWOOD Music Editor Light or
KENWOOD Music Control, you can search for audio files by Genres, Artists, Albums, Playlists,
and Songs.
• KENWOOD Music Editor Light and KENWOOD Music Control are available on the following
web site: www.kenwood.com/cs/ce/
18
JS_KWD_KDC_BT48DAB_EWE0_02_EN.indd 18
Data Size:
Book Size:
B6L (182 mm x 128 mm)
B6L (182 mm x 128 mm)
25/11/2013 5:17:25 PM
MORE INFORMATION
About iPod/iPhone
Made for
- iPod touch (1st, 2nd, 3rd, 4th, and 5th generation)
- iPod classic
- iPod nano (3rd, 4th, 5th, 6th, and 7th generation)
- iPhone, iPhone 3G, 3GS, 4, 4S, 5, 5s, 5c
• For the latest compatible list and software versions of
iPhone/iPod, see: www.kenwood.com/cs/ce/ipod
• You cannot operate iPod if “KENWOOD” or “ ” is displayed
on iPod.
About AhaTM Radio
• AhaTM is a third-party service, therefore the specifications
are subject to change without prior notice. Accordingly,
compatibility may be impaired or some or all of the services
may become unavailable.
• Some AhaTM functionality cannot be operated from this
unit.
About Bluetooth
• Depending on the Bluetooth version of the device, some
Bluetooth devices may not be able to connect to this unit.
• This unit may not work with some Bluetooth devices.
• Signal conditions vary, depending on the surroundings.
• For more information about Bluetooth, visit the following
website: www.kenwood.com/cs/ce/
TROUBLESHOOTING
Symptom
Sound cannot be heard.
“PROTECT” appears and no operations
can be done.
• Sound cannot be heard.
• The unit does not turn on.
• Information shown on the display is
incorrect.
Remedy
• Adjust the volume to the optimum level.
• Check the cords and connections.
Check to be sure the terminals of the speaker wires are insulated properly, then
reset the unit. If this does not solve the problem, consult your nearest service
center.
Clean the connectors. ( 2)
The unit does not work at all.
Reset the unit. ( 3)
DAB reception is poor.
Make sure [ON] is selected for [DAB ANT POWER]. ( 4)
“DAB ANT ERR” appears.
Check the DAB antenna. If a passive antenna (without a booster) is used, set
[DAB ANT POWER] to [OFF]. ( 4)
• Radio reception is poor.
• Connect the antenna firmly.
• Static noise while listening to the radio. • Pull the antenna out all the way.
“NA FILE” appears.
Make sure the disc contains supported audio files. ( 18)
“NO DISC” appears.
Insert a playable disc into the loading slot.
“TOC ERROR” appears.
Make sure the disc is clean and inserted properly.
“PLEASE EJECT” appears.
Reset the unit. If this does not solve the problem, consult your nearest service
center.
Disc cannot be ejected.
Press and hold M to forcibly eject the disc. Be careful not to drop the disc when it
is ejected. If this does not solve the problem, reset the unit. ( 3)
“READ ERROR” appears.
Copy the files and folders onto the USB device again. If this does not solve the
problem, reset the USB device or use another USB device.
“NO DEVICE” appears.
Connect a USB device, and change the source to USB again.
“COPY PRO” appears.
A copy-protected file is played.
ENGLISH |
JS_KWD_KDC_BT48DAB_EWE0_03_EN.indd 19
Data Size:
Book Size:
B6L (182 mm x 128 mm)
B6L (182 mm x 128 mm)
19
5/12/2013 10:46:35 AM
TROUBLESHOOTING
Symptom
Remedy
“NA DEVICE” appears.
Connect a supported USB device, and check the connections.
“NO MUSIC” appears.
Connect a USB device that contains playable audio files.
“iPod ERROR” appears.
Symptom
• Reconnect the iPod.
• Reset the iPod.
Noise is generated.
Skip to another track or change the disc.
Tracks do not play back as
you intended them to play.
Playback order is determined when files are recorded.
Remedy
No Bluetooth device is
detected.
• Search from the Bluetooth device again.
• Reset the unit. ( 3)
Pairing cannot be
made.
• Make sure you have entered the same PIN code to both the
unit and Bluetooth device.
• Delete pairing information from both the unit and the
Bluetooth device, then perform pairing again. ( 12)
“DEVICE FULL” appears.
The number of registered devices has reached its limit.
Retry after deleting an unnecessary device. ( 15,
DEVICE DELETE)
This is caused by how the tracks are recorded.
Echo or noise occurs.
• Adjust the microphone unit’s position. ( 12)
• Check the [ECHO CANCEL] setting. ( 13)
Correct characters are not
displayed (e.g. album name).
This unit can only display uppercase letters, numbers, and a
limited number of symbols. Uppercase Cyrillic letters can also
be displayed if [RUSSIAN SET] is set to [BКЛ]. ( 5)
Phone sound quality
is poor.
• Reduce the distance between the unit and the Bluetooth
device.
• Move the car to a place where you can get a better signal
reception.
• Voice calling method
is not successful.
• “N/A VOICE TAG”
appears.
• Use voice calling method in a more quiet environment.
• Reduce the distance from the microphone when you speak
the name.
• Make sure the same voice as the registered voice tag is
used.
Bluetooth®
Do not use too many hierarchical levels or folders.
Elapsed playing time is not
correct.
AhaTM Radio
“READING” keeps flashing.
“ACTN DISABLE”
An unavailable operation has been performed.
“AHA APP UPDATE
REQUIRED”
Make sure you have installed the latest version of the AhaTM
application for KENWOOD application on your device.
“AHA UNAVAILABLE”
Your device cannot be connected to Aha Radio server.
“CHECK APP”
There is no response from Aha server.
“CHECK DEVICE”
Check the Aha application on your device.
“CONNECT PHONE”
Connect your device to the unit.
“LOGIN FAILED”
Logging into Aha has failed.
“NETWORK
UNAVAILABLE”
The network has been disconnected.
“ERROR” appears.
Try the operation again. If “ERROR” appears again, check if
the device supports the function you have tried.
“POOR GPS”
The GPS reception condition of your smartphone is poor.
“NO INFO” appears.
Bluetooth device cannot get the contact information.
“NO SKIPS”
Skips is not allowed.
“NOT SUPPORT”
appears.
• “NO ENTRY” appears.
• “NO PAIR” appears.
The connected phone does not support Voice Recognition
feature.
There is no registered device connected/found via
Bluetooth.
20
JS_KWD_KDC_BT48DAB_EWE0_04_EN.indd 20
Data Size:
Book Size:
B6L (182 mm x 128 mm)
B6L (182 mm x 128 mm)
12/12/2013 9:01:49 AM
TROUBLESHOOTING
Bluetooth®
Sound is being
interrupted or skipped
during playback of a
Bluetooth audio player.
The connected
Bluetooth audio player
cannot be controlled.
• Reduce the distance between the unit and the Bluetooth
audio player.
• Turn off, then turn on the unit and try to connect again.
• Other Bluetooth devices might be trying to connect to
the unit.
DAB Frequency Range
• Check whether the connected Bluetooth audio player
supports Audio/Video Remote Control Profile (AVRCP).
(Refer to the instructions of your audio player.)
• Disconnect and connect the Bluetooth player again.
Sensitivity
L Band
1 452.960 MHz — 1 490.624 MHz
Band III
174.928 MHz — 239.200 MHz
–100 dBm
Signal-to-Noise Ratio
80 dB
Antenna Connector Type
SMB
Antenna Output Voltage
14.4 V (11 V – 16 V)
Antenna Maximum Current
< 100 mA
FM Frequency Range
Reset the unit and try the operation again. If this does
not solve the problem, consult your nearest service
center.
Analog radio
• “HF ERROR XX”
appears.
• “BT ERROR” appears.
Remedy
Digital radio
Symptom
SPECIFICATIONS
87.5 MHz — 108.0 MHz (50 kHz space)
Usable Sensitivity
(S/N = 26 dB)
9.3 dBf (1 μV/75 Ω)
Quieting Sensitivity
(DIN S/N = 46 dB)
10.2 dBf (1.13 μV/75 Ω)
Frequency Response (±3 dB)
30 Hz — 15 kHz
Signal-to-Noise Ratio
(MONO)
75 dB
Stereo Separation (1 kHz)
45 dB
MW Frequency Range
Usable Sensitivity
(S/N = 20 dB)
LW Frequency Range
Usable Sensitivity
(S/N = 20 dB)
531 kHz — 1 611 kHz (9 kHz space)
28 dBμV (25 μV)
153 kHz — 279 kHz (9 kHz space)
33 dBμV (45 μV)
ENGLISH |
JS_KWD_KDC_BT48DAB_EWE0_02_EN.indd 21
Data Size:
Book Size:
B6L (182 mm x 128 mm)
B6L (182 mm x 128 mm)
21
25/11/2013 5:17:26 PM
8 times over sampling
Profile
HFP (Hands-Free Profile)
SPP (Serial Port Profile)
PBAP (Phonebook Access Profile)
OPP (Object Push Profile)
A2DP (Advanced Audio Distribution Profile)
AVRCP (Audio/Video Remote Control Profile)
Spindle Speed
500 rpm — 200 rpm (CLV)
Wow & Flutter
Below measurable limit
Frequency Response (±1 dB)
20 Hz — 20 kHz
Total Harmonic Distortion (1 kHz)
0.01 %
Maximum Output Power
50 W × 4
105 dB
Output Power
30 W × 4 (PWR DIN 45324, +B = 14.4 V)
Dynamic Range
90 dB
Speaker Impedance
4 Ω — 8 Ω
Channel Separation
85 dB
Tone Action
Band1
100 Hz ±8 dB
MP3 Decode
Compliant with MPEG-1/2 Audio Layer-3
Band2
250 Hz ±8 dB
WMA Decode
Compliant with Windows Media Audio
Band3
630 Hz ±8 dB
Band4
2.5 kHz ±8 dB
Band5
6.3 kHz ±8 dB
Bluetooth
USB
AAC Decode
AAC-LC “.m4a” files
USB Standard
USB 1.1, USB 2.0 (Full speed)
File System
FAT12/ 16/ 32
Maximum Supply Current
DC 5 V MP3 Decode
Compliant with MPEG-1/2 Audio Layer-3
Preout Level/Load (CD)
4 000 mV/10 kΩ
Preout Impedance
≤ 600 Ω
1 A
Auxiliary Signal-to-Noise Ratio (1 kHz)
Bluetooth
GaAIAs
Audio
Laser Diode
Digital Filter (D/A)
Frequency Response (±3 dB)
20 Hz — 20 kHz
Input Maximum Voltage
1 000 mV
30 kΩ
WMA Decode
Compliant with Windows Media Audio
AAC Decode
AAC-LC “.m4a” files
Input Impedance
WAV Decode
Linear-PCM
Operating Voltage
14.4 V (10.5 V — 16 V allowable)
Version
Bluetooth Ver.2.1+EDR Certified
Maximum Current Consumption
10 A
Frequency Range
2.402 GHz — 2.480 GHz
General CD player
SPECIFICATIONS
Operational Temperature Range
0°C — +40°C
182 mm × 53 mm × 159 mm
1.4 kg
Output Power
+4 dBm (MAX), 0 dBm (AVE) Power Class 2
Installation Size (W × H × D)
Maximum Communication Range
Line of sight approx. 10 m
Weight
Subject to change without notice.
22
JS_KWD_KDC_BT48DAB_EWE0_05_EN.indd 22
Data Size:
Book Size:
B6L (182 mm x 128 mm)
B6L (182 mm x 128 mm)
16/12/2013 11:17:29 AM
INSTALLATION / CONNECTION
Warning
• The unit can only be used with a 12 V DC power supply, negative ground.
• Disconnect the battery’s negative terminal before wiring and mounting.
• Do not connect Battery wire (yellow) and Ignition wire (red) to the car
chassis or Ground wire (black) to prevent a short circuit.
• Insulate unconnected wires with vinyl tape to prevent a short circuit.
• Be sure to ground this unit to the car’s chassis again after installation.
Installing the unit (in-dash mounting)
Do the required wiring.
( 24)
Caution
• For safety’s sake, leave wiring and mounting to professionals. Consult the
car audio dealer.
• Install this unit in the console of your vehicle. Do not touch the metal parts
of this unit during and shortly after use of the unit. Metal parts such as the
heat sink and enclosure become hot.
• Do not connect the [ wires of speakers to the car chassis or Ground wire
(black), or connect them in parallel.
• Mount the unit at an angle of less than 30º.
• If your vehicle wiring harness does not have the ignition terminal, connect
Ignition wire (red) to the terminal on the vehicle’s fuse box which provides
12 V DC power supply and is turned on and off by the ignition key.
• After the unit is installed, check whether the brake lamps, blinkers, wipers,
etc. on the car are working properly.
• If the fuse blows, first make sure the wires are not touching car’s chassis,
then replace the old fuse with one that has the same rating.
Basic procedure
1 Remove the key from the ignition switch, then
disconnect the [ terminal of the car battery.
2 Install the DAB antenna.
See Installing the DAB antenna. ( 25)
3 Connect the wires properly.
Hook on the top side
Dashboard of
your car
Orientate the trim plate as
illustrated before fitting.
Bend the appropriate tabs to hold the
mounting sleeve firmly in place.
How to remove the unit
1 Detach the faceplate.
2 Fit the catch pin on the extraction keys
into the holes on both sides of the trim
plate, then pull it out.
3 Insert the extraction keys deeply into the
slots on each side, then follow the arrows
as shown on the right.
See Wiring connection. ( 24)
4 Install the unit to your car.
See Installing the unit (in-dash mounting).
5 Connect the [ terminal of the car battery.
6 Reset the unit. ( 3)
ENGLISH |
JS_KWD_KDC_BT48DAB_EWE0_02_EN.indd 23
Data Size:
Book Size:
B6L (182 mm x 128 mm)
B6L (182 mm x 128 mm)
23
25/11/2013 5:17:26 PM
Wiring connection
Antenna terminal
Rear/subwoofer output
MIC (Microphone input terminal) ( 12)
Part list for
installation
USB cable
(A) Faceplate
Fuse (10 A)
DAB antenna jack ( 25)
Connecting the ISO connectors on some VW/
Audi or Opel (Vauxhall) automobiles
You may need to modify the wiring of the
supplied wiring harness as illustrated below.
Red (Ignition wire)
Ignition wire
(Red)
A7 (Red)
Vehicle
Light blue/yellow
STEERING WHEEL
REMOTE INPUT
(Steering remote
control wire)
REMOTE CONT
Default wiring
Color and function
Yellow
: Battery
Blue/White
: Power control
Red
: Ignition (ACC)
Black
: Earth (ground) connection
Purple ]
: Rear speaker (right)
Purple/black [
Gray ]
: Front speaker (right)
Gray/black [
White ]
: Front speaker (left)
White/black [
Green ]
: Rear speaker (left)
Green/black [
(B) Trim plate
To the steering wheel remote
control adapter
Unit
Battery wire
(Yellow)
A4 (Yellow)
Pin
A4
A5
A7
A8
B1
B2
B3
B4
B5
B6
B7
B8
If no connections are made, do not let the wire
come out from the tab.
Yellow (Battery wire)
(C) Mounting sleeve
Red (A7)
Yellow (A4)
Blue/White
(Power control wire/
Antenna control wire)
ANT . CONT
P. CONT
To the power control terminal
when using the optional power
amplifier, or to the antenna
control terminal in the vehicle.
(D) Wiring harness
Brown
(Mute control wire)
MUTE
To connect the Kenwood
navigation system, consult your
navigation manual.
(E) Extraction key
ISO connectors
24
JS_KWD_KDC_BT48DAB_EWE0_07_EN.indd 24
Data Size:
Book Size:
B6L (182 mm x 128 mm)
B6L (182 mm x 128 mm)
27/12/2013 4:49:15 PM
Installing the DAB antenna
Caution
• The film antenna (F) is exclusively for use inside the vehicle.
• Do not install at the following locations:
– where it may block the driver’s view.
– where it may obstruct the operation of safety devices such as air
bags.
– on movable glass surfaces such as the rear hatch.
– at side of vehicle (e.g. door, front quarter window).
– on rear window.
• Signal strength will weaken when installed at the following locations:
– on IR reflecting glass or locations covered with mirror type glass
film.
– where it overlaps with genuine radio antenna (pattern).
– where it overlaps with window heating wires.
– on glass that blocks radio signals (e.g. IR reflecting glass, thermal
insulation glass).
• Poor reception may occur:
– due to noise when windscreen wiper, air conditioner, or motor is
turned on.
– depending on the direction of the broadcast station with respect to
the vehicle (antenna).
• Thoroughly wipe oil and dirt from the pasting surface with the
supplied cleaner (I).
• Do not bend or damage the film antenna (F).
• It may not be possible to install on certain vehicles.
• Check the cable routing of the film antenna (F) and amplifier unit
(G) before pasting.
• Do not apply any glass cleaner after pasting the film antenna (F).
Determine the antenna installation position
• The direction of the film antenna (F) changes depending on whether the film antenna (F) is installed on the
right side or left side.
• Be sure to check the installation location of film antenna (F) before installing. Film antenna cannot be
re-pasted.
• Separate from other antennas by at least 100 mm.
• Do not paste the amplifier unit (G) on the ceramic line (black part) around the front glass. Because there is not
enough adhesion.
o Installing the antenna on the left side
o Installing the antenna on the right side
Ceramic line (black part)
Earth sheet*
150 mm
70 mm
150 mm
(G)
(F)
(F)
(G)
70 mm
Earth sheet*
* Paste the earth sheet of the amplifier unit (G) on the metal part of the front pillar.
Part list for installation
(H) Cable clamper
(F) Film antenna
(G) Amplifier unit
(cable with booster, 3.5 m)
(I) Cleaner
25
JS_KWD_KDC_BT48DAB_EWE0_02_EN.indd 25
Data Size:
Book Size:
B6L (182 mm x 128 mm)
B6L (182 mm x 128 mm)
25/11/2013 5:17:26 PM
Installation overview
Caution
When installing the antenna cable inside
the front pillar with the air bag installed
The antenna should be installed on the passenger side for
safety.
• The front pillar cover is secured with a special clip
which may need to be replaced when it is removed.
Contact your vehicle dealer for details on removing
the front pillar cover and availability of replacement
parts.
– Wait until the glass surface is completely
dry before proceeding.
– Warm the surface of the windscreen with
defroster if it is cold (during winter).
3 Remove the separator (tag I) of film
antenna (F) horizontally and paste the
antenna on the windscreen.
Separator (tag I)
(F)
Clip
Front pillar
Antenna installation
1 Remove the front pillar cover of your car.
• Install the amplifier unit (G) above the air bag so that
it does not obstruct the operation of the air bag.
Do not touch the pasting surface (adhesive
side) of the film antenna (F).
4 Remove the separator (tag II) of film
antenna (F) vertically and paste the
antenna on the windscreen.
Separator (tag II)
(F)
Front pillar
5 Rub the film antenna gently onto the
(G)
windscreen in the direction of the arrow
shown to allow it to stick firmly.
(F)
2 Clean the windscreen with the supplied
cleaner (I).
Air bag
(I)
26
JS_KWD_KDC_BT48DAB_EWE0_02_EN.indd 26
Data Size:
Book Size:
B6L (182 mm x 128 mm)
B6L (182 mm x 128 mm)
25/11/2013 5:17:27 PM
6 Remove the application film (tag III).
8 Remove the film covering the earth sheet and paste the earth sheet
(F)
Application film (tag III)
Do not touch the lead terminal of film antenna (F).
7 Set the postion of the protrusion of the amplifier unit (G) with the
K on the film antenna (F) and paste.
Do not touch the lead terminal or the pasting surface (adhesive side)
of the amplifier unit (G).
• When installing the antenna on the right side
on the metal part of the vehicle.
Provide sufficient leeway for the earth sheet so that it does not
interfere with the interior parts (front pillar cover). Also take care that
the interior parts do not interfere with the amplifier unit (G).
Windscreen
Earth sheet
(G)
Front pillar cover
Set the position of the protrusion with K mark
9 Wire the antenna cables.
Earth sheet
(F)
(G)
Lead contact of the amplifier unit
(metal part)
Use cable clamper (H) to secure the antenna to the pillar at several
positions.
10 Attach the front pillar cover back to its original position.
Be sure not to damage the earth sheet and amplifier unit (G) when
covering.
11 Connect the amplifier unit (G) to the DAB input terminal on the rear
of the unit.
12 Set [DAB ANT POWER] to [ON]. ( 5)
Lead terminal of the film antenna (F)
• When installing the antenna on the left side
(G)
(F)
Earth sheet
Set the position of the protrusion with J mark
27
JS_KWD_KDC_BT48DAB_EWE0_02_EN.indd 27
Data Size:
Book Size:
B6L (182 mm x 128 mm)
B6L (182 mm x 128 mm)
25/11/2013 5:17:27 PM
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising