UKW-/DAB+ UHRENRADIO Bedienungsanleitung

UKW-/DAB+ UHRENRADIO Bedienungsanleitung
UKW-/DAB+ UHRENRADIO
Bedienungsanleitung
Index:
Features21
Overview of the radio 22
Getting started 24
Clock operation
25
Using the auto-radio function
28
Dimmer operation28
Temperature and humidity record
28
About the weather indicator
29
Menu-Clock
29
Operating your radio DAB+
30
Operating your radio FM
34
Direct memory station –DAB+ and FM
35
Setting the sleep timer-DAB+/FM
35
Battery replacement
36
Batteries safety warnings
36
Precautions37
20
Features
• Display of Time, Calendar, Day of the week,
Temperature, Humidity and Weather forecast
• MAX/MIN Temperature and Humidity record
• 12/24 Hour format selectable
• Auto time update function
• Alarm and snooze
• FM Reception(87.5MHz~108MHz)
• DAB/DAB+ Reception BAND III 174.928MHz(5A) ~
239.200MHz(13F)
• Auto Search/Manual Tuning
• Wake to FM/DAB or beeper
• Scrolling DLS Text for DAB+
• Menu Display for selection of major function
• Sleep Mode (15/30/60/90 minutes Timer)
• 12 Direct Preset Station keys (6 DAB+ & 6 FM)
• Stereo sound through headphone jack
• Backlight LCD display with Dimmer
• AC/DC operation (AC power adaptor supplied) or (battery
AA not supplied)
21
2. OVERVIEW OF THE RADIO
1. LCD display
2. Loud speaker
3. Volume control
4. Channel selection
5. SLEEP key
6. Power key
7. DAB+/FM slide switch 8.BEEP/OFF/AUTO slide switch
9. SNOOZE/LIGHT key 10. Memory keys
11. SCAN / < key
12. INFO / > key
13. OK/MENU key
14. DIMMER slide switch
15. TIME key
16. ALARM key
17. MAX/MIN key
18. RESET key
19. DC Socket
20. Headphone Socket
21. Temperature sensor 22. Battery door
23. Telescopic Aerial
3
4
1
2
22
7
8
9
10
11 12
6
5
13
23
22
21
14
15
16
17
18
19
20
23
3. GETTING STARTED
1. If using battery to power the unit, remove the battery door
at the back of the unit by slightly sliding the door upwards.
2. Insert 4 new AA size batteries into the battery
compartment. Ensure all the batteries are inserted with the
correct polarity as shown inside the battery compartment.
3. Replace the battery door.
4. If using DC adaptor to power the unit, plug the DC adaptor into the DC socket, and connect another end of the
adaptor to the mains power.
5. Once you power/repower the clock, all the segment of
the LCD will be shown for 2 seconds and turn to time
mode with automatically receive the DAB signal for time
synchronization.
24
Note:
1. The initial time is 12:00 am when you use the clock first
time, or repower the clock.
2. The signal reception will last 10 seconds if there is no
signal received.
3. The DAB+/FM radio may consume more power, so you
can use the mains power when you use the radio, and use
the battery to retain the clock time.
4. CLOCK OPERATION
4.1 Time and Calendar setting
1. Press and hold “TIME” key for 2 seconds to enter time
setting mode with Hour digit flashing.
2. Press “<” / “>” key to adjust the value of flashing digit
backward or forwards. (Press the key without releasing
to speed up the setting.)
3. Press “TIME” key again to step the setting items in this
sequence: Hour > Minute > Second > 12/24 Hour format
> Year > Month > Date.
4. Press “TIME” key again after setting Date to save and
exit the setting.
25
Normal mode
Hour setting
Date setting
Month setting
Minute setting
Second setting
Year setting
Hour format setting
Note:
For Second setting, press “<” / “>” key to set the value to 00.
4.2 Alarm Time setting
1. Press and hold “ALARM” key for 2 seconds to enter
alarm time setting mode with Hour digit flashing.
2. Press “<” / “>” key to adjust the value of flashing digit.
(Press the key without releasing to speed up the setting.)
3. Press “ALARM” key again to step the setting item to
Minute digit, and press “<” / “>” key to adjust its value.
4. Press “ALARM” key again to save and exit the setting.
26
Normal mode Hour setting Minute setting
Note:
In normal mode, press “ALARM” key to display the alarm
time for one minute.
4.3 Using the Alarm and Snooze
1. Slide the “BEEP/OFF/AUTO” switch to BEEP postion.
2. Set the alarm time as the above described.
3. When the clock reach the alarm time, the alarm will
sound. Where, it can be stopped by follwing operation:
a) Auto stop after 2 minutes sounding without any
operation, and it will re-alarm by the next day.
b) By pressing “SNOOZE/LIGHT” key to enter snooze that
the alarm will sound again after 5 minutes (2 minutes
sound and 3 minutes snooze).
c) By sliding the “BEEP/OFF/AUTO” switch to OFF position
to turn off the alarm function.
Note:
1. The snooze can be used continuously in 24 hours.
2. During the snooze, the snooze icon “ZZ” will keep flashing.
27
5. USING THE AUTO-RADIO FUNCTION
1. Slide the “BEEP/OFF/AUTO” switch to AUTO postion.
And slide the “DAB+/FM” switch to DAB+/FM position.
2. Set the alarm time as the above describtion.
3. When the clock reach the alarm time, it will automatically
turn on the radio you selected.
4. Press the “POWER” key to turn off the radio. And the
radio will automatically turn on by the next day.
6. DIMMER OPERATION
You may adjust the LCD brightness by sliding the “DIMMER”
switch.
1. Slide the “DIMMER” switch to H position for selecting
high brightness.
2. Slide the “DIMMER” switch to M position for selecting
moderate brightness.
3. Slide the “DIMMER” switch to L position for selecting
low brightness.
7. CHECKING AND DELETING MAX./MIN. TEMPERATURE ANDHUMIDITY RECORD
1. Press the “MAX/MIN” key to check and keep the max./
min.temperature record for 30 seconds.
2. Press and hold “MAX/MIN” key for 3 seconds to delete
the max.&min. temperature records.
28
Normal mode
Max. Temperatur
Min. Temperature
Note:
Once you reset or repower the unit, all the records will be
defaulted.
8. ABOUT THE WEATHER INDICATOR
The built-in barometer can notice atmosphere pressure
changes. Based on the data collected, it can predict the
weather conditions in the forthcoming 12-24hours.
Sunny Slight cloudy
Cloudy Rainny
Note:
1. The accuracy of a general pressure-based weather
forecast is about 70% to 75%.
2. The weather forecast is meant for the forthcoming 12-24
hours. It may not necessarily reflect the current situation.
29
9. MENU-CLOCK
1. Press “OK/MENU” key or press “CH” selection to access
the main menu.
2. Rotate “CH” selection to select Language or Auto Update
Time. Press “OK” / “CH” to confirm your selection and enter
its sub-menu.
Note:
1. There are five languages to select(English / German /
French / Dutch / Italian ), the display of the unit will change
according to the language you selected. But the information
received from DAB station will not change.
2. Enter the “Auto update time” menu, you can turn on/
off the auto update time function that the clock will be/not
update the time automatically.
3.In menu mode, it will automatically return to previous
menu if there is no any operation in 3 seconds.
10. OPERATING YOUR RADIO- DAB+
10.1 Power on - DAB+
1. Carefully extend the telescopic aerial, and slide “DAB+/
FM” switch to DAB+ position.
2. Press “POWER” key to turn on your radio.
3. For the first time you use the radio, it will scan the
channels automatically, and store the stations.
30
4. Rotate “CH” selection to select your desired station
and press “OK/MENU” key or “CH” selection to confirm.
5. Rotate “VOL” control to adjust your desired volume.
6. Press “VOL” control to make your radio mute. Press it
again or rotate it (right) to volume up your radio.
7. Press “POWER” key again to turn off the radio.
Note:
If the station list is still empty after the Auto-tune your radio
will display “No DAB station”, so it may be necessary to
relocate your radio to a position giving better reception.
31
10.2 Channel Information display
During you listen to a DAB+ radio, repeatedly press “INFO”
key to display the detail information of current channel.
Current Station
Frequency
Signal quality
Audio format
Data Rate
Program Type
10.3 Factory Reset
1. Press and hold “SCAN” key for 2 seconds to reset the
radio that all the records(station record and memory record)
for FM&DAB will be defaulted.
Note:
Factory Reset function only be operated in DAB+ radiomode.
10.4 Menu-DAB+
1. Press “CH” selection or “OK/MENU” key, the DRC value
will display on the LCD.
32
2. Rotate the “CH” selection to display the setting item in
this sequence: Language > DRC value(DAB) > Manual
tune(DAB) > EQ(Radio) > Station Order(DAB) > Auto
Update Time > Scrolling Speed(Radio) > Back.
3. Select your desired item and press “OK/MENU” key to
enter its sub-menu, select your desired value and press
“OK” key to confirm the setting.
Note:
In menu mode, it will automatically return to previous menu
when there is no operation in 3 seconds.
10.4.1 Manual tune
1. Press “OK/MENU” key/ “CH” selection to display the
main-menu.
2. Rotate “CH” selection to select Manual tune and press
“OK/MENU” key to select it with the channel displayed.
3. Rotate “CH” selection to select your desired channel
Current Station
Main-Menu
Current Station
33
Manual Tune
Channel selection
11. OPERATING YOUR RADIO-FM
11.1 Power on - FM
1. Carefully extend the telescopic aerial, and slide “DAB+/
FM” switch to FM position.
2. Press “POWER” key to turn on your radio.
3. For the first time you use the radio, the default radio
frequency is 87.5MHz, you can manually select your
desired channel by rotating the “CH” selection.
4. Rotate “VOL” control to adjust your desired volume.
5. Press “VOL” control to make your radio mute. Press it
again or rotate it (right) to volume up your radio.
6. Press “POWER” key again to turn off the radio.
Note:
The frequency will increase/decrease 0.05MHz for every
rotation.
11.2 Auto Scanning
1. In FM mode, you can quickly rotate the “CH” selection to
make the radio search station automatically.
2. The radio will not stop searching until it searches a
station.
Note:
Once the radio searches station, it will listen to the station
automatically.
34
11.3 Menu-FM
1. Press “CH” selection or “OK/MENU” key to access the
main menu.
2. Rotate the “CH” selection to display the setting item in
this sequence: Language > EQ(Radio) > Auto Update
Time > Scrolling Speed(Radio) > Back.
3. Select your desired item and press “OK/MENU” key to
enter its sub-menu, select your desired value and press
“OK” key to confirm the setting.
Note:
1. In menu mode, it will automatically return to previous
menu when there is no operation in 3 seconds.
12. DIRECT MEMORY STATION - DAB+&FM
When you listen to a station on DAB+ or FM, press and hold
any one Memory key to preset the current station. And you
can press the key to turn to the channel directly next time.
Note:
There is 6 preset keys separately for DAB+ and FM.
13. SETTING THE SLEEP TIMER-DAB/FM
1. When you listen to the radio(DAB+/FM), Press “SLEEP”
key to enter
35
2. Press “SLEEP” key again to select the desired sleep
time. Each press changes the setting time as following:
15 > 30 > 60 > 90 >00 minutes.
3. When it reach the time you set, the DAB+/FM radio will
turn off automatically.
14. BATTERY REPLACEMENT
If the low battery indicator “
” displayed on the LCD,
please replace with 4 new AA size batteries at once.
15. BATTERIES SAFETY WARNINGS
- Please read all instructions carefully before use.
- Use only alkaline batteries, not rechargeable batteries.
- Install batteries correctly by matching the polarities (+/-).
- Always replace a complete set of batteries.
- Never mix used with new batteries.
- Remove exhausted batteries immediately.
- Do not recharge and do not dispose of batteries in fire
as the batteries may explode.
- Ensure batteries are stored away from metal objects
as contact may cause a short circuit.
- Avoid exposing batteries to extreme temperature or
humidity or direct sunlight.
- Keep all batteries out of reach from children. They are a
choking hazard.
36
16. PRECAUTIONS
- This main unit is intended to be used indoors only.
- Do not subject the unit to excessive force or shock.
- Do not expose the unit to extreme temperatures, direct
sunlight, dust or humidity.
- Do not immerse in water.
- Avoid contact with any corrosive.
- Do not dispose this unit in a fire as it may explode.
- Do not open the inner back case or tamper with any
components of this unit.
37
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising