D00NVG001 H110 User’s Guide English With your new Brother P-touch labelling machine, you can create a wide variety of custom, self-adhesive labels. This machine uses Brother “TZe” tapes from 3.5 to 12 mm widths. “TZe” tape cassettes are available in many colours and sizes. Visit www.brother.com for a complete list of tapes that work with your machine. Read this manual carefully before starting and keep it in a handy place for future reference. 1 GETTING STARTED Power Supply and Tape Cassette 1 2 Tape exit slot Cutter's edge Print head Tape guides Toothed Wheel Cassette cover Tape cutter lever End of tape Open the cassette cover by pressing the highlighted area at the top end of the machine. Insert a tape cassette, making sure it snaps into place. • Make sure you turn the power off when replacing batteries or tape cassettes. NOTE • Make sure the end of the tape feeds under the tape guides. • Use Genuine Brother P-touch TZe tapes with this machine. When using the optional AC adapter (AD-24ES) 1. Insert adapter cord into the AC adapter socket at the bottom of the machine. 2. Insert the plug into the nearest standard electrical socket. For the memory backup feature, use either AAA alkaline batteries (LR03) or Ni-MH batteries (HR03) together when using the AC adapter. 3 4 AC adapter socket Insert six new AAA alkaline batteries (LR03) or fully charged Ni-MH batteries (HR03), making sure their positive and negative ends point in the correct directions. Users of alkaline batteries: Always replace all six batteries at the same time with brand new ones. Users of Ni-MH batteries: Always replace all six batteries at the same time with fully charged ones. 1 2 Insert the two hooks at the bottom of the cassette cover into the slots on the machine. Securely close the cassette cover making sure it snaps into place. LCD 1 2 7 3 4 5 6 8 9 1. Size 5. Caps 8. Label Length 2. Font 6. Underline/Frame If a specific label length has 3. Cursor 7. Style been selected, also appears. 9. Cable 4. Shift NOTE • The LCD displays one row of 15 characters; however, the text you enter can be up to 80 characters in length. • Label length displayed on the LCD may differ slightly from the actual printed label length. Initial Settings 1 2 Turn your machine on. Supply power using six AAA batteries or the optional AC adapter (AD-24ES), and then press turn the power on. Set the language. The default setting is [English]. / 3 [Language] / [Arabic/Persian/English] Set the unit of measurement. The default setting is [mm]. / [Unit] / [inch/mm] . NOTE • The machine automatically turns off if no keys are pressed within five minutes. • To cancel any operation, press • After pressing . , the machine displays “Accepted” to confirm your settings. . to Keyboard 12 1 2 13 14 3 4 5 6 15 16 17 18 19 7 8 20 9 21 10 22 11 23 1. Menu key 2. Power key 3. Cursor key: Left (Use with the Shift key to go to the top of the text.) 4. Esc key 5. OK key 6. Size key 7. Font key 8. Character key 9. Shift key 10. Accent Key 11. Eng/Arabic Key 12. Tape cutter lever 13. Clear key 14. Print key 15. Preview key 16. Cursor key: Right (Use with the Shift key to go to the end of the text.) 17. Style key 18. Frame key 19. Cable key 20. Backspace key 21. Enter key 22. Symbol key 23. Space key NOTE • While selecting the settings, press the Space key to revert to the default item. • Pressing the Preview key displays a generated image of the label, and may differ from the actual label when printed. 1 GETTING STARTED (Continued) 2 BASIC USAGE Contrast Entering Text This function allows you to set the brightness of the LCD. You can select from five levels of brightness. The default setting is . X Switching the character for entry [English/Arabic] English / / Arabic [LCD contrast] [-2/-1/0/+1/+2] • To change a setting back to default, press the Space key. X Switching Upper-Case/Lower-Case Press to switch between upper and lower case text. Upper-case ( ON) Lower-case ( OFF) Caps Caps X Creating Two-Line Labels Move the cursor to where you want to start the next line and press . Use either 9 or 12 mm wide tape for two line printing. Line 1 Label image Line 2 NOTE • The return symbol ( ) is displayed when you press the Enter key, indicating you have chosen to input a second line of text. X Entering Accented Characters Press - to add an accented character. / • See the table of accented characters included in this guide. • To cancel an operation, press . • The order of accented characters depends on the selected LCD language. Entering Text (continued) X Preview You can preview the text before printing. X Changing Label Width / / [Width] [Normal/x 2/x 1/2] Width • Pressing the Preview key displays a generated image of the label, and may differ from the actual label when printed. • When the LCD cannot display all the text at Normal x2 x 1/2 once, press X Changing Label Length / / Printing Labels / to display the hidden text. [Label Length] [Auto/30-300 mm] • Press / / to leave the preview mode. X Feeding (Tape Feed) NOTE • After the label is printed, cut along the printed dots (:) with scissors so that the label length matches what is displayed on the LCD. • If a specific label length has been selected, also appears in the LCD. • By pressing the Space key, [Auto] is displayed. • To change a setting back to default, press the Space key. + • This function feeds approximately 25 mm of blank tape. X Printing [Copies: ] / / ~ X Deleting Text Press • If you need only one copy of the label, press . without selecting the number of copies. NOTE • To delete all text and settings or text only, press [Text Only] / [Text&Format]/ • You can print up to nine copies of each label. • The number of copies can also be specified by pressing a number key. • To cut the label, press the tape cutter lever on the upper-right corner of the machine after the message “Please Cut” is displayed. “Please Cut” is displayed on the screen for two seconds. • To prevent damage to the tape, do not touch the cutter lever while the message “Please Wait” is displayed. • To remove the backing, fold the label lengthwise with the text facing inward to expose the inside edges of the backing. Peel off the backing one piece at a time and apply. 2 BASIC USAGE (Continued) Printing Labels (continued) X Using Print Options [Numbering] You can print a series of up to nine labels at a time using auto-numbering. Using this feature you can automatically increase a selected number by one after each label is printed. The numbers of labels you can print at one time depend on the initial number. Example: To print copies of a label containing a serial number (0123, 0124 and 0125) Enter numbers / Move the cursor to the number you wish to increment + / [Numbering] • Select the highest number you want to be printed when setting the number. [Mirror] Example: Follow the instructions below after entering “J.SMITH” if you want to Mirror Print “J.SMITH”. Enter text/characters [Mirror] + [Mirror Print?] ) / / [Margin] [Full/Half/Narrow/Chain Print] [Full]/[Half]/[Narrow] For leaving equal margins on both sides of the text. Full Half Narrow ABC 25 mm ABC 25 mm 12 mm 12 mm 4 mm 4 mm 3. Press , then [Copies: ] appears. / or enter a number with number keys to select the number of copies. 4. Press . Printing starts, and then the message “Feed OK?” appears. 5. Press to enter more text. 6. Clear the text, enter the text for the next label, and then press . 7. When the message “Feed OK?” appears after the last label is printed, press • Use clear tape in [Mirror], so you can read the labels correctly from the opposite side when attached on glass, windows or other transparent surfaces. ABC [Chain Print] Use this setting when printing several labels with minimum margins. 1. Enter text. 2. Press / / X Setting Margin ( . 8. After the tape is fed, press the cutter lever to cut off the chain of labels. Printing Labels (continued) Saving Label Files NOTE • When you set [Chain Print], feed the tape before using the cutter otherwise a part of the text may be cut off. • When you set [Half] or [Narrow], the displayed label length is the length from the printed dots (:) to the end of the label. Cut along the printed dots (:) with scissors. LCD Full Narrow Enter Text / / [File] [Save] / Label image ABC 67 mm Half You can save up to 15 labels and recall them for printing at a later date. A maximum of 80 characters can be saved per file, a maximum of 1200 characters can be saved in total memory. You can also edit and overwrite the stored labels. X Save X Print ABC / 41 mm ABC / 25 mm • To print more than one copy of a label with minimum margins, set the margin to [Narrow]. • Do not pull the tape since this may damage the tape cassette. [File] [Print] / [Copies: ] / / ~ X Open / / [File] [Open] / NOTE • You can also enter the File menu by pressing . • If you try to store a label when there is already a label stored to that number, a message “Overwrite OK?” appears. Press your new label. Press to save to cancel. • You must type text before starting the save function. 3 USING TEMPLATES Cable Label Text Label This function allows you to create two types of cable labels. This function allows you to create various labels using the built-in templates. See the Text Label templates table included in this guide. Cable Label template 1: Cable Label template 2: Example: [Template that includes one repeated graphic] Example: Cable Label 1 [Select Layout] / / [Input Text] Enter text [Print] [Copies: ] / / ~ [Decorative] [Select Category] [Select Design] / [Text] / [Input Text] NOTE • Label length is auto only. You cannot set label length. • To clear all text and settings or text only, press / / [Auto/30-999 mm] [Print] [Text&Format]/[Text Only] [Copies: ] . • You can set the Font, Size, Style and Frame while entering texts. • To exit templates and return to the text input screen, do one of the following: a) Press b) Press [Set Label Length] . / • To preview labels, press the Preview key when [Print] is displayed on the LCD. • You cannot save labels created using templates to memory. / ~ NOTE • Press the Space key to return to the initial setting for “Label Length” mode. The initial setting is [Auto]. • To clear the text, move the cursor to the right side where you want to clear, and then press to select [Exit], and then press when “Print” appears. / • To clear all text, press appears. Press • • • • • . , then “All Clear” to clear. Press to cancel. You cannot set the Font, Size, Style and Frame while entering text. If you set the longer label length than the default ([Auto]), the text label is printed repeatedly within the set length. The text label may not be fully printed depending on the set length. The available label length setting changes depending on the number of texts you entered. These templates are available when using 12 mm wide tape cassettes. You cannot edit the templates. Text Label (continued) Pattern Label • To exit templates and return to the text input screen, do one of the following: This function allows you to create unique labels using built-in templates. See the Pattern Label templates table included in this guide. You cannot enter text when using Pattern Label templates. a) Press b) Press . / to select [Exit], and then press when “Print” appears. • To preview labels, press the Preview key when [Print] is displayed on the LCD. • You cannot save labels created using templates to memory. • When you access Text Label or Pattern Label templates, your most recently printed Text Label or Pattern Label template label length is recalled. Example: / [Decorative] [Select Category] / [Select Design] [Pattern] / [Set Label Length] [Print] 4/5 / [Copies: ] [30-999 mm] / / ~ NOTE • Press the Space key to return to the initial setting for “Label Length” mode. The initial setting is [100 mm]. • These templates are available when using 12 mm wide tape cassettes. • You cannot edit the templates. • To exit templates and return to the text input screen, do one of following: a) Press b) Press . / to select [Exit], and then press when “Print” appears. • To preview labels, press the Preview key when [Print] is displayed on the LCD. • You cannot save labels created using templates to memory. • When you access Text Label or Pattern Label templates, your most recently printed Text Label or Pattern Label template label length is recalled. 4 FORMATTING KEYS Font Key Press Frame Key to change the font settings. / Font Select the settings to select the frame design. See the Frame designs table included in this guide. / Helsinki (Frutiger™) Brussels (Palatino™) Florida (Frutiger™) Size Key Press Press to change the size settings. / Size Select the settings Large Select a frame NOTE • To cancel an operation, press . • See the Font samples table included in this guide. • The actual printed font size depends on the tape width, number of characters, and number of input lines. When characters reach a minimum size, the selected font defaults to a custom font based on the Helsinki style. This allows you to print labels using the smallest text possible on narrow or multi-line labels. Medium Small Symbol key X Entering Symbols Style Key Press to change the style settings. / Style [History *1/Basic/Pictograph] / Select the settings Normal / / Select category Select a symbol *1 When you select symbols, up to seven recently Outline used symbols are added to History. If you choose History, you cannot select the category. • See the table of symbols included in this guide. Shadow • To cancel an operation, press Italic • You can also select from basic and pictograph categories by pressing the shortcut keys included in this guide. Bold I+Bold I+Outline I+Shadow Vertical V+Bold . 5 OTHER Symbol key (continued) X Basic Punctuation Space key Unit Mathematics Greek Letter Brackets Number Specifications Dimensions: (W x D x H) Approx. 109 (W) x 202 (D) x 55 (H) mm Weight: Approx. 400 g (without batteries and tape cassette) Power supply: Six AAA alkaline batteries (LR03) Six AAA Ni-MH batteries (HR03) *1 Optional AC adapter (AD-24ES) Tape cassette: Brother P-touch TZe tape widths: 3.5 mm, 6 mm, 9 mm, 12 mm *1 Arrows Shape X Pictograph Office Space key Sports Signs Animal Datacom/AV Holiday Electrical Food/Drink Fun Kitchen Smiley Garden Clothing DIY Vehicle School Licensed Trademarks MonotypeTM Monotype is a trademark of Monotype Imaging Inc. registered in the United States Patent and Trademark Office and may be registered in certain jurisdictions. Visit support.brother.com for the latest information about recommended batteries. Accessories Tape Cassettes: Visit the Brother Solutions Center at support.brother.com for the latest information about consumables AC Adapter: Cutter Unit: AD-24ES TC-4 (replacement) If the cutter blade becomes blunt after repetitive use and the tape cannot be cut cleanly, turn around the cutter board as shown in the illustration 1. If you still have difficulty replace with a new cutter unit (stock #TC-4) by obtaining one from an authorised Brother reseller. X Replacing the Cutter Unit 1. Pull out the two sections of the cutter unit (green) in the direction of the arrows shown in the illustration 2. 2. Install the new cutter unit. Push it in until it snaps into place. Cutter board FrutigerTM Frutiger is a trademark of Linotype Corp. registered in the U.S. Patent and Trademark Office and may be registered in certain other jurisdictions in the name of Linotype Corp. or its licensee Linotype GmbH. PalatinoTM Palatino is a trademark of Linotype GmbH registered in the U.S. Patent and Trademark Office and may be registered in certain other jurisdictions. WARNING Do not touch the cutter blade directly with your fingers. 6 HELPFUL HINTS Troubleshooting X Error message Message X What to do when... Cause/Remedy Problem Battery Low! The batteries are low. If using AAA alkaline batteries: Replace them with six new AAA alkaline batteries. Do not use old and new batteries together or mix alkaline batteries with other battery types. If using Ni-MH batteries: Charge them fully. Battery Empty! The installed batteries are running low and need to be changed for continued operation. Invalid! • There is no text above the cursor when you selected [Numbering]. • You selected an invalid character for [Numbering]. • You selected an invalid number for [Label Length]. • You entered an invalid value as the label length while using templates. No Text! • You tried to print a text file when there is no data stored in the memory. • You pressed • You pressed when no text is entered. + when no text is entered. • You pressed • Do not press when no text is entered. or The display stays blank after you have turned on the machine. The machine does not print, or the printed characters are not formed correctly. • Check that you have inserted the tape cassette correctly. • If the tape cassette is empty, replace it. • Check that you closed the cassette cover correctly. The machine's settings have reset themselves. • The batteries may be low. Replace them with six new AAA alkaline batteries. Do not use old and new batteries together or mix alkaline batteries with other battery types. • When power is disconnected for more than three minutes, all text and formats in the display are lost. A blank horizontal line appears through the printed label. There may be some dust on the print head. Remove the tape cassette and use a dry cotton swab to gently wipe the print head with an upand-down motion. The optional print head cleaning cassette (TZe-CL3) is also available. entered while using templates. • Make sure you do not exceed the maximum number of lines allowed (two). • You tried to print or preview two lines of text while 3.5 or 6 mm tape is installed. Install a larger tape size. No Cassette! You tried to print, feed or preview a label when there is no cassette installed. Cutter Pressed You pressed the tape cutter lever in the middle of the printing process. Text Full! Make sure you do not exceed the maximum number of characters allowed (80 characters for text, 50 characters for templates. If your message contains symbols, the maximum number of characters may be reduced.). Text Limit! Since the number of entered characters Change Length exceeds the label length, reduce the text, or select [Auto] as the label length. The machine has “locked up” (that is, nothing happens when See “Resetting the machine”. a key is pressed, even though the machine is on.) The power turns off when you try to print. No Frame OK? • Printing on 3.5 mm tape with invalid Frame setting ON. (Select to print with no Frame, to cancel.) Feed OK? • Feeding tape after printing when [Chain Print] is selected. See “Setting Margin”. Insert 12 mm • Only 12 mm tape cassette is available for templates. Wrong Tape! Use TZe tape • Use a tape cassette with the mark. • Check that you installed the batteries with the positive and negative ends in the correct position. • If the batteries are low, replace them with six new AAA alkaline batteries. Do not use old and new batteries together or mix alkaline batteries with other battery types. • Check that you connected the AD-24ES adapter correctly. When the label is printed out, See “Setting Margin” in this user's guide and there is too select [Half] or [Narrow] to have smaller much margin margins for your label. (space) on both sides of the text. when no text was 2 Line Limit!/ 1 Line Limit! Solution • The batteries may be low. Replace them with six new AAA alkaline batteries. Do not use old and new batteries together or mix alkaline batteries with other battery types. • Check that you inserted the batteries correctly. • A wrong adapter is used; the recommended adapter is the AD-24ES. The tape does • Check that the end of the tape feeds under not feed the tape guides. correctly or the tape gets stuck • The cutter lever is pressed while printing. Do inside the not touch the cutter lever during printing. machine. To change the language setting. See “Initial Settings”. 6 HELPFUL HINTS (continued) Shortcuts CAUTION Language Space key Width Label Length NOTE Margin File Decorative Unit LCD contrast Resetting the machine You can reset the machine when you want to restore it to factory settings, or when it is not working correctly. All text, settings and stored files are cleared. 1 Turn the machine off, press and hold and , and then press and hold to turn the machine back on. 2 First release the power button, and then release USING A COMBINATION OF DIFFERENT BATTERIES (SUCH AS Ni-MH AND ALKALINE), MAY RESULT IN AN EXPLOSION. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. and . The machine turns on with the internal memory reset. Battery Recommendations • Remove the batteries if you do not intend to use the machine for an extended period of time. • Dispose of the batteries at an appropriate collection point, not in the general waste stream. In addition, be sure to observe all applicable federal, state, and local regulations. • When storing or discarding the batteries, wrap each battery (for example with cellophane tape), to prevent it from short-circuiting. (See the picture on the lower right.) (Battery insulation example) 1. Cellophane tape 2. Alkaline or Ni-MH battery 2 1 Category Symbols (Basic) Punctuation Mathematics Brackets Arrows Unit Greek Letter Number Shape Category Office Signs Datacom/AV Electrical Fun Smiley Clothing Vehicle Sports Animal Holiday Food/Drink Kitchen Garden DIY School Symbols (Pictograph) Accented Characters Font samples Helsinki Florida Brussels Text Label templates Pattern Label templates Frame designs Off (No frame) * Images are only for illustrative purposes.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project