Owner's manual / Mode d'emploi Bedienungsanleitung

Owner's manual / Mode d'emploi Bedienungsanleitung
Owner’s manual / Mode d’emploi
Bedienungsanleitung / Istruzioni per l’uso
Gebruiksaanwijzing / Manual de instrucciones
Bruksanvisning / Manual de instruções
RDS-EON FM / MW / LW RADIO CD / MP3 / WMA /
COMBINATION WITH DVD / MD / CD CHANGER /
DAB / TV CONTROL
•
COMBINÉ RADIO RDS-EON FM / PO / GO ET LECTEUR
CD / MP3 / WMA A CHANGEUR CD / DVD / MD ET
COMMANDE DAB / TÉLÉVISEUR
•
RDS-EON-UKW-MW-LW-RADIO-CD/MP3/WMAKOMBINATION MIT DVD/MD/CD-WECHSLER-/DAB/
TV-STEUERUNG
•
LETTORE CD, MP3 E WMA, CON RDS-EON, RADIO FM, AM
E OL, IN COMBINAZIONE CON SCAMBIATORE DVD, MD E
CD, SISTEMA DAB E COMANDO TV
•
RDS-EON FM/MW/LW RADIO CD/MP3/WMA COMBINATIE
MET DVD/MD/CD-WISSELAAR/DAB/TV BEDIENING
•
COMBINACIÓN DE RADIO RDS-EON FM / MW / LW Y
REPRODUCTOR DE DISCOS CD / MP3 / WMA CON CONTROL
DE CAMBIADOR DE DISCOS DVD / MD / CD Y DAB/TELEVISOR
•
KOMBINERAD RDS-EON FM/MV/LV-RADIO OCH CD/MP3/
WMA-SPELARE MED KONTROLL FÖR DVD/MD/
CD-VÄXLARE OCH DAB/TV
•
RADIO RDS-EON FM/MW/LW E CD/MP3/WMA COMBINADO
COM CONTROLO DE CARREGADOR DVD/MD/CD E DE
DAB/TV
Clarion Co., Ltd.
2002/12 (A·D)
All Rights Reserved. Copyright © 2002: Clarion Co., Ltd.
Printed in China / Imprimé en Chine / Gedruckt in China / Stampato in Cina
Gedrukt in China / Impreso en China / Tryckt i Kina / Impresso na China
PE-2565E
280-7907-00
Thank you for purchasing this Clarion product.
∗ Please read this owner’s manual in its entirety before operating this equipment.
∗ After reading this manual, be sure to keep it in a handy place (e.g., glove compartment).
∗ Check the contents of the enclosed warranty card and keep it carefully with this manual.
∗ This manual includes the operating procedures of the CD changer, MD changer, DAB and TV tuner
connected via the CeNET cable. The CD changer, MD changer and TV tuner have their own
manuals, but no explanations for operating them are described.
CAUTIONS:
This appliance contains a laser system and
is classified as a “CLASS 1 LASER
PRODUCT”. To use this model properly,
read this Owner’s Manual carefully and keep
this manual for your future reference. In
case of any trouble with this player, please
contact your nearest “AUTHORIZED service
station”. To prevent direct exposure to the
laser beam, do not try to open the enclosure.
OBS!
Apparaten innehåller laserkomponenten
som avger laserstrålning överstigande
gränsen för laserklass 1.
R
High-Tech High-Touch
VAROITUS
Suojakoteloa si saa avata. Laite sisältää
laserdiodin, joka lähettää näkymätöntä
silmille vaarallista lasersäteilyä.
» DICHIARAZIONE DI CONFORMITA’ «
(D.M. 28 agosto 1995, no548)
Io, Fabbricante / Mandatario nell’UE
!CAUTION
USE OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER
THAN THOSE SPECIFIED IN THE OWNER’S
MANUAL MAY RESULT IN HAZARDOUS
RADIATION EXPOSURE.
ADVARSEL.
Denne mærking er anbragt udvendigt på
apparatet og indikerer, at apparatet arbejder
med laserstråler af klasse 1, hvilket betyder,
at der anvendes laserstråler af svageste
klasse, og at man ikke på apparatets
yderside kan blive udsat for utilladelig
kraftig stråling.
APPARATET BØR KUN ÅBNES AF
FAGFOLK MED SÆRLIGT KENDSKAB TIL
APPARATER MED LASERSTRÅLER!
Indvendigt i apparatet er anbragt den her
gengivne advarselsmækning, som advarer
imod at foretage sådanne indgreb i
apparatet, at man kan komme til at udsaætte
sig for laserstråling.
2
DXZ838RMP
MODEL
Clarion Europa GmbH
Hessenring 19-21
64546 Mörfelden-Walldorf
Dichiaro che il prodotto
Autoradio
DXZ838RMP
è conforme alle disposizioni contenute nel suddetto
decreto relativamente alla prevenzione e l’eleminazione
dei disturbi radioelettrici provocati dai ricevitori di
radiodiffusione sonora e televisiva.
Io, Fabbricante / Mandatario nell’UE
Data
Clarion Europa GmbH
Hessenring 19-21
64546 Mörfelden-Walldorf
DXZ838RMP
321
BEQ indication
Preset channel indication (1 to 6)
Disc number indication (1 to 12)
Stereo indication
: Regional indication
: Traffic announcement indication
: Traffic programme IDENTIFICATION
indication
: Programme type indication
: Information indication
: Mute indication
: MAGNA BASS
EXTEND indication
1. PRECAUTIONS .............................................................................................................................. 3
Sloping Console .............................................................................................................................. 3
Handling Compact Discs ................................................................................................................. 4
2. CONTROLS .................................................................................................................................... 5
3. NOMENCLATURE .......................................................................................................................... 6
Names of the Buttons and Their Functions ..................................................................................... 6
Major Button Operations When External Equipment is Connected to This Unit .............................. 7
Display Items ................................................................................................................................... 8
LCD Screen ..................................................................................................................................... 8
4. DCP ................................................................................................................................................. 9
5. REMOTE CONTROL ..................................................................................................................... 10
Inserting the Batteries .................................................................................................................... 10
Functions of Remote Control Unit Buttons ..................................................................................... 11
6. OPERATIONS ............................................................................................................................... 12
Basic Operations ........................................................................................................................... 12
Radio Operations ........................................................................................................................... 15
RDS Operations ............................................................................................................................ 16
CD/MP3/WMA Operations ............................................................................................................. 20
Operations Common to Each Mode .............................................................................................. 24
7. OPERATIONS OF ACCESSORIES .............................................................................................. 29
CD/MD Changer Operations ......................................................................................................... 29
TV Operations ............................................................................................................................... 31
Digital Radio/DAB Operations ....................................................................................................... 32
DVD Deck Operations ................................................................................................................... 35
8. IN CASE OF DIFFICULTY ............................................................................................................ 36
9. ERROR DISPLAYS ....................................................................................................................... 38
10. SPECIFICATIONS ....................................................................................................................... 317
: MP3 indication
: DSF indication
: P.EQ indication
: DOLBY PL II indication
: DTS indication
: WMA indication
: Scan indication
: Repeat indication
: Random indication
: DOLBY DIGITAL indication
: FOLDER indication
: LINEAR PCM indication
: DISC indication
LCD Screen
In extreme cold, the screen movement may slow down and the screen may darken, but this is normal.
The screen will recover when it returns to normal temperature.
1. PRECAUTIONS
1. This unit is applicable for on-road 4 wheel
vehicle purpose only. Use for tractor, fork
truck, bulldozer, off road vehicle, 2 or 3
wheel motor bicycle, marine boat or other
special purpose vehicle is not appropriate.
2. When the inside of the car is very cold and
the player is used soon after switching on the
heater moisture may form on the disc or the
optical parts of the player and proper playback may not be possible. If moisture forms
on the disc, wipe it off with a soft cloth. If
moisture forms on the optical parts of the
player, do not use the player for about one
hour. The condensation will disappear naturally allowing normal operation.
3. Driving on extremely bumpy roads which
cause severe vibration may cause the sound
to skip.
INFORMATION FOR USERS:.
CHANGES OR MODIFICATIONS TO THIS
PRODUCT NOT APPROVED BY THE MANUFACTURER WILL VOID THE WARRANTY.
8
DXZ838RMP
Sloping Console
3. If you move the SLOPING CONSOLE by
hand, this may create play. To correct this
play, with the power on for the unit, press the
[Q] button to close the SLOPING CONSOLE.
4. After a disc is ejected, the SLOPING CONSOLE automatically returns to the tilted or
closed state. If there is any obstruction when
Handling Compact Discs
Use only compact discs bearing the
mark.
or
Do not play heart-shaped, octagonal, or other
specially shaped compact discs.
Some CDs recorded in CD-R/CD-RW mode
may not be usable.
Handling
• Compared to ordinary music CDs, CD-R and
CD-RW discs are both easily affected by high
temperature and humidity and some of CD-R
and CD-RW discs may not be played.
Therefore, do not leave them for a long time in
the car.
• New discs may have some roughness around
the edges. If such discs are used, the player
may not work or the sound may skip. Use a
ball-point pen or the like to remove any roughness from the edge of the disc.
Ball-point pen
This unit uses sloping console to make largescreen displays possible.
When you use the sloping console, be sure to
close it.
Roughness
CAUTION
• Never play a compact disc with any cellophane tape or other glue on it or with peeling
off marks. If you try to play such a compact
disc, you may not be able to get it back out of
the CD player or it may damage the CD
player.
• Do not use compact discs that have large
scratches, are misshapen, cracked, etc. Use
of such discs may cause misoperation or
damage.
• To remove a compact disc from its storage
case, press down on the center of the case
and lift the disc out, holding it carefully by the
edges.
• Do not use commercially available CD protection sheets or discs equipped with stabilizers,
etc. These may damage the disc or cause
breakdown of the internal mechanism.
Storage
• Do not expose compact discs to direct sunlight or any heat source.
• Do not expose compact discs to excess humidity or dust.
• Do not expose compact discs to direct heat
from heaters.
Cleaning
BE CAREFUL NOT TO GET YOUR FINGERS
CAUGHT WHEN OPENING AND CLOSING
THE SLOPING CONSOLE.
1. For safety’s sake, always close the SLOPING CONSOLE before leaving this unit
unused for a prolonged period or switching
OFF the ignition key.
If you switch OFF the ignition key with the
SLOPING CONSOLE tilted, the SLOPING
CONSOLE does not close.
2. Before the SLOPING CONSOLE closes,
there may be a braking sound from the
safety mechanism. This is normal.
DXZ838RMP
the SLOPING CONSOLE tries to close, the
safety mechanism is triggered and the
SLOPING CONSOLE returns to the open
state. If this happens, remove the obstruction, then press the [Q] button.
5. To avoid scratching the compact disk, keep
the 12 or 8 cm CD level when inserting or removing them.
• Never stick labels on the surface of the compact disc or mark the surface with a pencil or
pen.
• To remove fingermarks and dust, use a soft
cloth and wipe in a straight line from the center of the compact disc to the circumference.
• Do not use any solvents, such as commercially available cleaners, anti-static spray, or
thinner to clean compact discs.
• After using special compact disc cleaner, let
the compact disc dry off well before playing it.
Be sure to unfold and read the next page. / Veuillez déplier et vous référer à la page suivante.
Bitte ausbreiten und die nächste Seite lesen. / Assicurarsi di aprire e leggere la pagina successiva.
Volgende pagina uitvouwen en doorlezen a.u.b. / Cerciórese de desplegar y de leer la página siguiente.
Glöm inte att vika ut och läsa nästa sida. / Não deixe de abrir e ler a próxima página.
3
DXZ838RMP
4
English
English
Operation status indication
Titles, PS names, PTYs, CT (clock), etc.
are displays.
: AUTO VOL indication
: Manual indication
: DAB indication
: Alternative frequency indication
English
Contents
Display Items
Note:
• Be sure to read this chapter referring to the front diagrams of chapter “2. CONTROLS” on page 5 (unfold).
Français Deutsch
Names of the Buttons and Their Functions
Main unit / Appareil principal / Hauptgerät / Apparecchio principale
Hoofdtoestel / Unidad principal / Huvudenhet / Unidade principal
[ROTARY]
[Q]
[RELEASE] button
[RDM] button
• Deeply push in the button to unlock the DCP.
• Perform random play while in the CD mode.
• Press and hold the button for 1 second or
longer to perform folder random play while in
the MP3/WMA mode.
[ROTARY] knob
[RELEASE]
• Adjust the volume by turning the knob clockwise or counterclockwise.
• Use the knob to perform various settings.
[FNC]
[A-M]
[BND]
[BEQ]
[TA]
[COLOR]
[BEQ] button
• Use the button to select one of the 4 types of
sound characteristics already stored in
memory.
Italiano
[TA] button
[AF]
[a], [d]
[
[D]
]
[DIRECT]
[T]
[DN], [UP]
Nederlands Español Svenska Português
[SCN]
[P/A]
[RPT]
[RDM]
Major Button Operations When External Equipment is
Connected to This Unit
3. NOMENCLATURE
[PLAY LIST]
With the SLOPING CONSOLE opened / Ouvrez la CONSOLE RABATTABLE
ÖFFNUNG DER SCHRÄGKONSOLE / Apertura della CONSOLE INCLINATA
Met het KANTELEND BEDIENINGSPANEEL geopend / Apertura de la CONSOLA INCLINABLE
DEN LUTANDE KONSOLEN öppen / Com a CONSOLA INCLINÁVEL aberta
[SCN] button
[BEQ] button
• Press the button to turn on the DSF.
• Press the button to turn on the PLII while the
DSF on.
[D] button
[a], [d] buttons
• When the button is pressed and held,
switches the disc titles or track titles while in
the MD changer mode.
• When the button is pressed and held,
switches the user titles or track titles, etc.
while in the CD changer mode.
• Press the button to change the DSF mode
while the DSF mode is on.
• Press the button to change the PLII mode
while the PLII mode is on.
● When the TV/DAB is connected
∗ For details, see the section “TV Operations” or “DAB Operations”.
[T] button
• Use the button to input a title in the CD
changer mode.
• Use the button to scroll the title during CD-text
play or MD changer play mode.
[P/A] button
• Button’s color change to multicolor.
[AF] button
[
• Press the button to turn on or off the AF (Alternative Frequency) function.
• When the button is pressed and held,
Regional function can select ON or OFF.
• Use the button to set the PTY (Programme
Type) standby mode or PTY items.
• Play or pause a CD while in the CD mode.
• Perform random play. Also perform disc random play when the button is pressed and
held.
• Press the button to turn on or off the AF (Alternative Frequency) function in the DAB
mode. (This function is only DAB tuner.)
[a], [d] buttons
[RPT] button
[
[D] button
• Select a station while in the radio mode or
select a track when listening to a CD. These
buttons are used to make various settings.
• Press and hold the button for 1 second or longer
to switch the fast-forward/fast-backward.
• Perform repeat play. When this button is
pressed and held, disc repeat play is performed.
• Move the next disc in increasing order.
• Use the button to set the PTY (Programme
Type) standby mode or PTY items in the DAB
mode.
• Switch the TV picture mode or VTR (external)
picture mode.
[BND] button
[SCN] button
[TA] button
• Switch the band, or seek tuning or manual
tuning while in the radio mode.
• Play a first track while in the CD mode.
• Perform scan play for 10 seconds of each
track. Disc scan play is performed when the
button is pressed and held.
• Use the button to set the TA (Traffic Announcement) standby mode in the DAB
mode. (This function is only DAB tuner.)
[A-M] button
[
[DIRECT] buttons
• Play or pause a CD, MD or DVD.
• Store a station into memory or recall it directly.
[a], [d] buttons
[a], [d] buttons
[UP], [DN] buttons
• Use the button to switch to the audio mode
(bass/MID/treble, balance/fader, Beat EQ,
Magna Bass Extended adjustment)
• Select a station.
• Select the folder while in the MP3/WMA mode.
[FNC] button
[DIRECT] buttons
• Press the button to turn on the power.
Press and hold the button for 1 second or
longer to turn off the power.
• Switch the operation mode among the Radio
mode, etc.
• Select a track when listening to a disc.
• Press and hold the button for 1 second or
longer to switch the fast-forward/fastbackward.
• Use the button to set the TA (Traffic Announcement) standby mode.
[COLOR] button
• Switch the display indication (Main display,
Clock display).
• Use the button to input a title in the CD
mode.
• Press and hold the button for 1 second or
longer to enter the adjust mode.
[P/A] button
• Perform preset scan while in the radio mode.
When the button is pressed and held, auto
store is performed.
Note: Be sure to unfold this page and refer to the front diagrams as you read each chapter.
Remarque: Veuillez déplier cette page et vous référer aux schémas quand vous lisez chaque chapitre.
Hinweis: Bitte diese Seite ausfalten und beim Lesen der einzelnen Kapitel die Frontdiagramme beachten.
Nota: Assicurarsi di aprire questa pagina e fare riferimento a questi diagrammi quando si legge ciascun capitolo.
Opmerking: Vouw deze pagina uit en zie tevens de afbeeldingen van het voorpaneel tijdens het doorlezen van de volgende hoofdstukken.
Nota: Cuando lea los capítulos, despliegue esta página y consulte los diagramas.
Observera: Vik ut denna sida för att kunna se figurerna över bilstereons framsida medan du läser de olika kapitlen.
Nota: Certifique-se de abrir esta página e consulte os diagramas frontais conforme realiza a leitura de cada capítulo.
• Repeat play while in the CD mode.
• Press and hold the button for 1 second or
longer to perform folder repeat play while in
the MP3/WMA mode.
∗ For details, see the section “CD/MD
Changer Operations”. For the DVD
changer, refer to the Owner’s Manual provided with the DVD changer.
● When the DTS/DOLBY DIGITAL
is connected (DVH923)
• Perform scan play for 10 seconds of each
track while in the CD mode.
• Press and hold the button for 1 second or
longer to perform folder scan play while in the
MP3/WMA mode.
[T] button
[CD SLOT]
[RPT] button
● When the CD/MD/DVD changer
is connected
• Store a station into memory or recall it directly while in the radio mode.
[PLAY LIST] button
• Press and hold for 1 second or longer to turn
on or off the play list mode. (MP3/WMA disc
only)
] button
[UP], [DN] buttons
• Perform preset scan while in the TV mode.
When the button is pressed and held, auto
store is performed. (This function is only TV
tuner.)
• Select the disc.
[RDM] button
[BND] button
] button
[AF] button
] button
[BND] button
• Switch the band.
• When the button is pressed and held, switch
seek tuning or manual mode.
[Q] button
• Press to eject a CD loaded in the unit.
• Press to open the CD slot and insert a CD.
[CD SLOT]
5
DXZ838RMP
6
DXZ838RMP
• CD insertion slot.
DXZ838RMP
7
English
English
2.
English
CONTROLS / LES COMMANDES / REGLER / CONTROLLI
REGELAARS / CONTROLES / KONTROLLER / CONTROLOS
The control panel can be detached to prevent
theft. When detaching the control panel, store it
in the DCP (DETACHABLE CONTROL PANEL)
case to prevent scratches.
We recommend taking the DCP with you when
leaving the car.
Attaching the DCP
1. Insert the DCP so that the A section on the
right side of the DCP catches on the hook B
on the unit.
Removing the DCP
1. With the SLOPING CONSOLE closed, turn
off the power.
2. Press the [RELEASE] button deeply to open
the DCP.
[RELEASE] button
2. Press the left side C of the DCP carefully to
fit it in place.
3. Pull the DCP toward you and remove it.
CAUTION
DCP
CAUTION
• Always close the SLOPING CONSOLE before removing the DCP.
• If you remove the DCP with the SLOPING
CONSOLE open, the sloping console
closes immediately. Be careful not to get
your fingers caught.
• The DCP can easily be damaged by
shocks. After removing it, be careful not to
drop it or subject it to strong shocks.
• If the [RELEASE] button is pressed and the
DCP is not locked into place, it may fall out
from vibration of the car. This can break
the DCP, so after removing it, either install
it on the unit or put it in its DCP case.
• The connector connecting the unit and the
DCP is an extremely important part. Be
careful not to damage it by pressing on it
with fingernails, screwdrivers, etc.
Note:
• If the DCP is dirty, wipe off the dirt with a soft, dry
cloth only.
DXZ838RMP
9
English
4. DCP
English
5. REMOTE CONTROL
Receiver for remote control unit
Operating range: 30˚ in all directions
Signal transmitter
Remote control unit
[FUNC]
[
[
],[
]
]
[ ],[ ]
[BAND]
[TA]
[MUTE]
[DISP]
[PS/AS]
[PTY]
[AF]
Inserting the Batteries
1. Turn the remote control unit over, then slide the
rear cover in the direction of the arrow.
2. Insert the AA (SUM-3, IECR-6/1.5V) batteries
that came with the remote control unit facing in
the directions shown in the figure, then close the
rear cover.
Notes:
Using batteries improperly can cause them to
explode. Take note of the following points:
• When replacing batteries, replace both batteries
with new ones.
• Do not short-circuit, disassemble or heat batteries.
• Do not dispose of batteries into fire or flames.
• Dispose of spent batteries properly.
10
DXZ838RMP
AA (SUM-3, IECR-6/1.5V)
Batteries
Rear cover
Rear side
Mode
Radio (RDS) /DAB
CD/MD changer
DVD changer
CD/MP3/WMA
Button
TV
[FUNC]
Switches among radio, DAB, CD/MP3/WMA, DVD deck, CD/MD changer, DVD changer
and TV.
[BAND]
Switches reception
band.
Plays the first track.
Top play.
Moves the next disc
in increasing order.
Switches reception
band.
[
],[
]
Increases and decreases volume (in all modes).
[
],[
]
Moves preset
channels up and
down.
Moves tracks up and down.
When pressed and held for 1 second or
longer:
Fast-forward/fast-backward.
Moves preset
channels up and
down.
No function.
Switches between playback and pause.
No function.
[
]
[MUTE]
[TA]
[DISP]
English
Functions of Remote Control Unit Buttons
Turns mute on and off.
TA on and off.
Switches among main display, clock (CT) display.
[PS/AS]
Preset scan.
When pressed and
held for 2 seconds or
longer: Auto store.
Scan play.
Press and hold the
button for 1 second
or longer to perform
folder scan play while
in the MP3/WMA
mode.
Scan play.
When pressed and
held for 1 second or
longer: Disc scan
play.
Preset scan.
When pressed and
held for 2 seconds or
longer: Auto store.
[AF]
AF function on and
off.
When pressed and
held for 1 second or
longer: REG function
on and off
Repeat play.
Press and hold the
button for 1 second
or longer to perform
folder repeat play
while in the
MP3/WMA mode.
Repeat play.
When pressed and
held for 1 second or
longer: Disc repeat
play.
No function.
PTY mode on and
off.
Random play.
Press and hold the
button for 1 second
or longer to perform
folder random play
while in the
MP3/WMA mode.
Random play.
When pressed and
held for 1 second or
longer: Disc random
play.
Switches between TV
and VTR.
[PTY]
∗ Some of the corresponding buttons on the main unit and remote control unit have different functions.
DXZ838RMP
11
English
6. OPERATIONS
Basic Operations
Note:Be sure to read this chapter referring to the front diagrams of
chapter “2. CONTROLS” on page 5 (unfold).
CAUTION
Be sure to lower the volume before switching off the unit power or the ignition key. The
unit remembers its last volume setting. If
you switch the power off with the volume up,
when you switch the power back on, the
sudden loud volume may hurt your hearing
and damage the unit.
Turning on/off the power
Note:
• Be careful about using this unit for a long time
without running the engine. If you drain the car’s
battery too far, you may not be able to start the
engine and this can reduce the service life of the
battery.
1. Press the [FNC] button.
2. The illumination and display on the unit light
up. The unit automatically remembers its last
operation mode and will automatically switch
to display that mode.
3. Press and hold the [FNC] button for 1 second or longer to turn off the power for the
unit.
Note:
• System check
The first time this unit is turned on after the wire
connections are completed, it must be checked
what equipment is connected. When the power is
turned on, “SYSTEM CHCK” and “Push POWER”
appear in the display alternately, so press the
[FNC] button. The system check starts within the
unit. When the system check is complete, press
the [FNC] button again.
Selecting a mode
1. Press the [FNC] button to change the operation mode.
2. Each time you press the [FNC] button, the
operation mode changes in the following order:
Radio mode ➜ DAB mode ➜ CD/MP3/WMA
mode ➜ DVD Deck mode ➜ CD changer
mode ➜ MD changer mode ➜ DVD changer
mode ➜ TV mode ➜ AUX mode ➜ Radio
mode...
∗ External equipment not connected with
CeNET is not displayed.
12
DXZ838RMP
Adjusting the volume
Turning the [ROTARY] knob clockwise increases the volume; turning it counterclockwise
decreases the volume.
∗ The volume level is from 0 (minimum) to 33 (maximum).
Switching the display
Press the [D] button to select the desired display.
Each time you press the [D] button, the display
switches in the following order:
Main display ➜ Clock (CT) display ➜
Main display
∗ Once selected, the preferred display becomes
the display default. When a function adjustment such as volume is made, the screen will
momentarily switch to that function’s display,
then revert back to the preferred display several seconds after the adjustment.
∗ For information on how to enter a title, refer to
the subsection “Entering titles” in section
“Operations Common to Each Mode”.
∗ When CT data is not received, “CT––:––” appears in the display.
Setting the Beat EQ
This unit are provided with 4 types of sound
tone effects stored in memory. Select the one
you prefer.
∗ The factory default setting is “USER CUSTOM”.
Each time you press the [BEQ] button, the tone
effect changes in the following order:
“BASS BOOST” ➜ “IMPACT” ➜ “EXCITE” ➜
“USER CUSTOM” ➜ “TONE BYPASS” ➜
“BASS BOOST” ...
• BASS BOOST
: bass emphasized
• IMPACT
: bass and treble emphasized
• EXCITE
: bass and treble emphasized mid de-emphasized
• USER CUSTOM : user custom
• TONE BYPASS : no sound effect
Basic Operations
∗ Pressing the [BEQ] button for 1 second or
longer while in “USER CUSTOM” sets flat, and
displays a “BEQ FLAT” message.
Note:
• When the separately-sold digital sound processor
(DVH923) is used, the bass and treble tone
adjustments cannot be selected.
Adjusting the subwoofer output
volume
You can adjust the volume output from the
unit’s subwoofer output terminal.
1. Press the [A-M] button and select “SWVOL”.
2. Turning the [ROTARY] knob clockwise
increases the output volume; turning it
counterclockwise decreases the output
volume.
∗ The factory default setting is “0”. (Setting range:
–6 to 6)
3. When the adjustment is complete, press the
[A-M] button several times until the function
mode is reached.
Adjusting the bass
The bass gain, bass F (center frequency) and
bass Q can be adjusted as follows.
1. Press the [A-M] button and select “BASS
ÅGAINΔ.
2. Press the [a] or [d] button and select
from “BASS ÅGAINΔ ➜ “BASS ÅF 50Δ
➜ “BASS ÅQ 1Δ ➜ “BASS ÅGAINΔ.
3. Turn the [ROTARY] knob clockwise or
counterclockwise as needed and adjust the
gain, the F (center frequency) and the Q.
BASS GAIN : –6 to 8 (The factory default
setting is “0”)
BASS F :
50Hz/80Hz/120Hz (The
factory default setting is “50”)
BASS Q :
1/1.25/1.5/2 (The factory
default setting is “1”)
4. When the adjustment is complete, press the
[A-M] button several times until the function
mode is reached.
Adjusting the MID
The MID gain, MID F (center frequency) and
MID Q can be adjusted as follows.
1. Press the [A-M] button and select “MID
Å GAINÎ ”.
2. Press the [a] or [d] button and select
from “MID ÅGAINΔ ➜ “MID ÅF 1kΔ ➜
“MID ÅQ 2Δ ➜ “MID ÅGAINΔ.
3. Turn the [ROTARY] knob clockwise or
counterclockwise as needed and adjust the
gain, the F (center frequency) and the Q.
MID GAIN : –6 to 6 (The factory default
setting is “0”)
MID F :
700Hz/1KHz/2KHz (The factory
default setting is “1k”)
MID Q :
1.5/2 (The factory default
setting is “2”)
4. When the adfustment is complete, press the
[A-M] button several times until the function
mode is reached.
Adjusting the TREBLE
The treble gain and treble F (center frequency)
can be adjusted as follows.
1. Press the [A-M] button and select “TREB
Å GAINÎ ”.
2. Press the [a] or [d] button and select
from “TREB ÅGAINΔ ➜ “TREB ÅF 12KΔ
➜ “TREB ÅGAINΔ.
3. Turn the [ROTARY] knob clockwise or
counterclockwise as needed and adjust the
gain and the F (center frequency).
TREB GAIN : –6 to 6 (The factory default
setting is “0”)
TREB F :
8KHz/12KHz (The Factory
default setting is “12K”)
DXZ838RMP
13
English
Adjusting the tone
Press the [A-M] button and select the item to
adjust. Each time you press the [A-M] button,
the item changes in the following order:
● When the BEQ (BASS BOOST, IMPACT,
EXCITE) is set
“SW-VOL” ➜ “BASS BOOST” ( IMPACT,
EXCITE) ➜ “BALANCE” ➜ “FADER” ➜
Function mode...
● When the BEQ (USER CUSTOM) is set
“SW-VOL” ➜ “BASS” ➜ “MID” ➜
“TREBLE” ➜ “BALANCE” ➜ “FADER” ➜
Function mode…
● When the TONE BYPASS is set
“SW-VOL” ➜ “BALANCE” ➜ “FADER” ➜
Function mode…
Basic Operations
English
4. When the adjustment is complete, press the
[A-M] button several times until the function
mode is reached.
Adjusting the balance
1. Press the [A-M] button and select
“BALANCE”.
2. Turning the [ROTARY] knob clockwise
emphasizes the sound from the right
speaker; turning it counterclockwise
emphasizes the sound from the left
speaker.
∗ The factory default setting is “0”. (Adjustment
range: L13 to R13)
3. When the adjustment is complete, press the
[A-M] button several times until the function
mode is reached.
Adjusting the fader
1. Press the [A-M] button and select “FADER”.
2. Turning the [ROTARY] knob clockwise
emphasizes the sound from the front
speakers; turning it counterclockwise
emphasizes the sound from the rear
speakers.
∗ The factory default setting is “0”. (Adjustment
range: F12 to R12)
3. When the adjustment is complete, press the
[A-M] button several times until the function
mode is reached.
Adjusting the Beat EQ
1. Press the [BEQ] button and select the Beat
EQ mode (1 to 3) to adjust.
2. Press the [A-M] button and select “BASS
BOOST” or “IMPACT” or “EXCITE”.
3. Turning the [ROTARY] knob clockwise
adjusts in the + direction; turning it
counterclockwise adjusts in the – direction.
∗ When BASS BOOST is selected, you can
adjust the bass in the range of –3 to 3.
∗ When IMPACT and EXCITE is selected, you
can adjust the bass and treble in the range of –3
to 3.
4. When the adjustment is complete, press the
[A-M] button several times until the function
mode is reached.
14
DXZ838RMP
Adjusting MAGNA BASS EXTEND
The MAGNA BASS EXTEND does not adjust
the low sound area like the normal sound
adjustment function, but emphasizes the deep
bass sound area to provide you with a dynamic
sound.
∗ The factory default setting is off.
1. Press and hold the [A-M] button for 1 second or longer to turn on the MAGNA BASS
EXTEND effect.
“M-B EX” lights in the display.
2. Press and hold the [A-M] button for 1 second
or longer to turn off the MAGNA BASS EXTEND effect.
“M-B EX” goes off from the display.
CT (Clock Time) function
The CT function receives CT data sent from an
RDS station and displays the time. Press the [D]
button to switch to the CT display.
∗ If a CT data is not being received, “CT––:––” appears in the display.
Note:
• CT data is not transmitted in some countries and
by some broadcast stations. Also, in some areas,
the CT may not display accurately.
Radio Operations
Manual tuning
1. Press the [FNC] button and select the radio
mode. The frequency or PS appears in the
display.
There are 2 ways available: Quick tuning and
step tuning.
When you are in the step tuning mode, the frequency changes one step at a time. In the quick
tuning mode, you can quickly tune the desired
frequency.
1. Press the [BND] button and select the desired band (FM or AM (MW/LW)).
∗ PS: Programme service name
2. Press the [BND] button and select the radio
band. Each time the button is pressed, the radio reception band changes in the following
order:
FM1 ➜ FM2 ➜ FM3 ➜ AM (MW/LW) ➜ FM1...
3. Press the [a] or [d] button to tune in the
desired station.
Tuning
There are 3 types of tuning mode available, seek
tuning, manual tuning and preset tuning.
Seek tuning
There are 2 types of seek tuning: DX SEEK and
LOCAL SEEK.
DX SEEK can automatically tune in to receivable broadcast stations; LOCAL SEEK can tune
in to only broadcast stations with a good reception sensitivity.
1. Press the [BND] button and select the desired band (FM or AM (MW, LW)).
2. Tune into a station.
∗ If “MANU” is lit in the display, press and hold
the [BND] button for 1 second or longer.
“MANU” in the display goes off and seek tuning is now available.
∗ If “TA” is lit in the display, TP stations are automatically sought.
●DX SEEK
Press the [a] or [d] button to automatically
seek a station.
When the [d] button is pressed, the station is
sought in the direction of higher frequencies; if
the [a] button is pressed, the station is sought
in the direction of lower frequencies.
∗ When seek tuning starts, “DX SEEK” appears in
the display.
∗ If “MANU” is not lit in the display, press and
hold the [BND] button for 1 second or longer.
“MANU” is lit in the display and manual tuning
is now available.
2. Tune into a station.
●Quick tuning:
Press and hold the [a] or [d] button for 1
second or longer to tune in a station.
●Step tuning:
Press the [a] or [d] button to manually
tune in a station.
Recalling a preset station
A total of 24 preset positions (6-FM1, 6-FM2, 6FM3, 6-AM) exist to store individual radio stations in memory. Pressing the corresponding
[DIRECT] button recalls the stored radio frequency automatically.
1. Press the [BND] button and select the desired band (FM or AM (MW/LW)).
2. Press the corresponding [DIRECT] button to
recall the stored station.
∗ Press and hold one of the [DIRECT] buttons
for 2 seconds or longer to store that station
into preset memory.
Manual memory
1. Select the desired station with seek tuning,
manual tuning or preset tuning.
2. Press and hold one of the [DIRECT] buttons
for 2 seconds or longer to store the current
station into preset memory.
●LOCAL SEEK
If you press and hold the [a] or [d] button for
1 second or longer, local seek tuning is carried
out. Broadcast stations with good reception sensitivity are selected.
∗ When local seeking starts, “LO SEEK” appears in
the display.
DXZ838RMP
15
English
Listening to the radio
English
Radio Operations
RDS Operations
Auto store
RDS (Radio Data System)
Auto store is a function for storing up to 6 stations that are automatically tuned in sequentially. If 6 receivable stations cannot be received,
a previously stored station remains
unoverwritten at the memory position.
1. Press the [BND] button and select the desired band (FM or AM (MW/LW)).
2. Press and hold the [P/A] button for 2 seconds or longer. The stations with good reception are stored automatically to the preset
channels.
This unit has a built-in RDS decoder system that
supports broadcast stations transmitting RDS data.
This system can display the name of the broadcast station being received (PS) and can automatically switch to the broadcast station with the
best reception as you move long distances (AF
switching).
Also, if a traffic announcement or programme
type is broadcast from an RDS station, no matter
what mode you are in, this broadcast is received.
Additionally, if EON information is received, this
information enables automatic switching of other
preset stations on the same network and interruption of the station being received with traffic
information from other stations (TP). This function is not available in some areas.
When using the RDS function, always set the
radio to FM mode.
• AF
: Alternative Frequency
• PS
: Programme Service Name
• PTY : Programme Type
• EON : Enhanced Other Network
• TP
: Traffic Programme
∗ If auto store is performed in the FM bands, the
stations are stored in FM3 even if FM1 or FM2
was chosen for storing stations.
Preset scan
Preset scan receives the stations stored in preset memory in order. This function is useful
when searching for a desired station in memory.
1. Press the [P/A] button.
2. When a desired station is tuned in, press the
[P/A] button again to continue receiving that
station.
Note:
• Be careful not to press and hold the [P/A] button
for 2 seconds or longer, otherwise the auto store
function is engaged and the unit starts storing
stations.
∗ RDS interrupt does not function during AM radio
reception or in TV mode.
∗ When set receives RDS signal, and can read PS
data, PS appears in the display.
AF function
The AF function switches to a different frequency on the same network in order to maintain optimum reception.
∗ The factory default setting is “ON”.
●Switching OFF the AF function
Press the [AF] button. “AF” in the display goes
off and the AF function turns off.
●Switching ON the AF function
Press the [AF] button. “AF” in the display lights
and the AF function turns on.
∗ If the reception of the current broadcast station deteriorates, “PI SEARCH” appears in the display and
the radio searches for the same programme on
another frequency.
●AF function between RDS and DAB
When the same programme is broadcast by
both RDS and DAB, and this function is ON, the
unit switches to receiving the broadcast with the
better reception automatically.
16
DXZ838RMP
∗ This function only operates when the DAH913 or
DAH923 DAB unit, sold separately, is connected.
∗ This factory default setting is “ON”.
RDS Operations
REG (Regional programme) function
When the REG function is ON, the optimum regional station can be received. When this function is OFF, if the regional station area switches
as you drive, a regional station for that region is
received.
∗ The factory default setting is “OFF”.
Notes:
• This function is disabled when a national station
such as BBC R2 is being received.
• The REG function ON/OFF setting is valid when
the AF function is ON.
●Switching the REG function ON
Press and hold the [AF] button for 1 second or
longer.
“REG” in the display lights and the REG function
turns on.
●Switching the REG function OFF
Press and hold the [AF] button for 1 second or
longer.
“REG” in the display goes off and the REG function turns off.
Manually tuning a regional station
in the same network
1. This function is valid when the AF function is
ON and the REG function is OFF.
Note:
• This function can be used when a regional broadcast of the same network is received.
2. Press any one of the [DIRECT] buttons to
call out the regional station.
3. If the reception condition of the called out
station is bad, press the [DIRECT] button of
the same number. The unit receives a local
station on the same network.
TA (Traffic Announcement)
In the TA standby mode, when a traffic announcement broadcast starts, the traffic
announcement broadcast is received as top
priority regardless of the function mode so you
can listen to it. Traffic programme (TP)
automatic tuning is also possible.
∗ This function can only be used when “TP” is lit in
the display. When “TP” is lit, this means that the
RDS broadcast station being received has traffic
announcement programmes.
●Setting the TA standby mode
If you press the [TA] button when only “TP” is lit
in the display, “TP” and “TA” light in the display
and the unit is set into the TA standby mode until
a traffic announcement is broadcast. When a
traffic announcement broadcast starts, “TRA
INFO” appears in the display. If you press the
[TA] button while a traffic announcement
broadcast is being received, the traffic announcement broadcast reception is cancelled and the
unit goes into the TA standby mode.
●Cancelling the TA standby mode
As “TP” and “TA” lit in the display, press the [TA]
button. The “TA” in the display goes off and the
TA standby mode is cancelled.
∗ If “TP” is not lit, pressing the [TA] button searches
for a TP station.
●Searching for a TP station
When “TP” is not lit, if you press the [TA] button,
“TA” in the display lights and the unit automatically receives a TP station.
Note:
• If a TP station is not received, the unit continues
the search operation. Pressing [TA] button again
goes off “TA” in the display and stops TP station
searching.
Auto store function for TP stations
You can automatically store up to 6 TP stations
into preset memory. If the number of TP can be
received less than 6, broadcast stations already
stored in memory and left without being overwritten.
As “TA” lit in the display, press and hold the [P/
A] button for 2 seconds or longer. The TP
stations with the good reception sensitivity are
stored into preset memory.
∗ Even if you select FM1 or FM2, a TP station is stored
into memory for FM3.
DXZ838RMP
17
English
1. Press and hold the [T] button for 1 second or
longer to switch to the adjustment selection
display.
2. Press the [a] or [d] button to select “LINK
ACT”.
3. Turn the [ROTARY] knob clockwise for “ON”
or counterclockwise for “OFF”.
● ON:
AF switching between DAB and RDS enabled.
● OFF:
AF switching between DAB and RDS disabled.
4. Press the [T] button to return to the previous
mode.
RDS Operations
English
PTY
Preset
number
This function enables you to listen to a broadcast of the selected programme type even if the
unit is on a function mode other than radio.
PTY item
ENGLISH
Contents
1
News
News
∗ Some countries do not yet have PTY broadcast.
∗ In the TA standby mode, a TP station has priority
over a PTY broadcast station.
2
Info
Information
3
Pop M
Pop Music
4
Sport
Sport
●Setting the PTY standby mode
When you press the [
] button, “PTY” lights in
the display and the PTY standby mode is turned
on. When the selected PTY broadcast starts, the
PTY item name appears in the display.
●Cancelling the PTY standby mode
When you press and hold the [
] button for 2
second or longer, “PTY” goes off in the display
and PTY standby mode is cancelled.
●Cancelling a PTY interrupt broadcast
] button during the PTY interrupt
Press the [
broadcast, the PTY interrupt is cancelled and
the unit returns to PTY standby mode.
5
Classics
Serious Classical Music
6
Easy M
Easy Listening Music
Selecting PTY
3. The PTY select mode is cancelled automatically 7 seconds after a PTY is selected.
PTY seek
1. When you press the [
] button, the PTY
select mode is turned on.
2. Select PTY.
3. Press the [a] or [d] button. If you press
the [d] button, the unit seeks a PTY broadcast moving up the frequencies; if you press
the [a] button, it seeks moving down the
frequencies.
∗ If no station with the selected PTY broadcast
can be received, the unit returns to the
previous mode.
1. When you press the [
] button, the unit
goes into PTY select mode.
2. Press any one of the [DIRECT] buttons. Alternatively, turn the [ROTARY] knob clockwise or counterclockwise to select the desired PTY.
PTY preset memory
1. When you press the [
] button, the PTY
select mode is turned on.
2. Turn the [ROTARY] knob clockwise or counterclockwise to select the desired PTY.
The 29 types of PTY below can be selected.
3. If you press and hold any one of the
[DIRECT] buttons for 2 seconds or longer,
the selected PTY is stored into that preset
channel memory.
∗ Below are the factory default settings stored
for the [DIRECT] buttons.
PTY item
ENGLISH
DEUTSCH
SVENSKA
FRANCAIS
Contents
News
Nachrich
Nyheter
Infos
News
Affairs
Aktuell
Aktuellt
Magazine
Today’s events
Info
Service
Info
Services
Information
Sport
Sport
Sport
Sport
Sports
Educate
Bildung
Utbildn
Educatif
Education
Drama
Hör + Lit
Teater
Fiction
Drama
Culture
Kultur
Kultur
Culture
Culture
Science
Wissen
Vetenskp
Sciences
Science
Varied
Unterh
Underh
Divers
Variety
Pop M
Pop
Pop
M Pop
Pop music
18
DXZ838RMP
RDS Operations
English
PTY item
ENGLISH
DEUTSCH
SVENSKA
FRANCAIS
Contents
Rock M
Rock
Rock
M Rock
Rock music
Easy M
U-Musik
Lättlyss
Chansons
Easy music
Light M
L-Musik
L klass
M Cl Lég
Light music
Classics
E-Musik
Klassisk
Classiq
Classics
Other M
- - Musik
Övrig m
Autre M
Other music
Weather
Wetter
Väder
Météo
Weather
Finance
Wirtsch
Ekonomi
Economie
Finance
Children
Kinder
För barn
Enfants
For children
Social
Soziales
Socialt
Société
Social
Religion
Religion
Andligt
Religion
Religion
Phone In
Anruf
Telefon
Forum
Phone in
Travel
Reise
Resor
Voyages
Travel
Leisure
Freizeit
Fritid
Loisirs
Leisure
Jazz
Jazz
Jazz
Jazz
Jazz
Country
Country
Country
Country
Country
Nation M
Landes M
Nation m
Ch pays
Nation music
Oldies
Oldies
Oldies
Rétro
Oldies
Folk M
Folklore
Folkm
Folklore
Folk music
Document
Feature
Dokument
Document
Documentaries
Emergency broadcast
If an emergency broadcast is received, all the
function mode operations are stopped.
“ALARM” appears in the display and the emergency broadcast can be heard.
●Cancelling an emergency broadcast
If you press the [AF] button, emergency broadcast reception is cancelled.
Switching the PTY display language
You can select one of 4 languages (English,
German, Swedish or French) for the PTY displayed in the display.
Volume setting of TA, emergency
broadcast (ALARM) and PTY
The volume for TA, ALARM and PTY interrupts
can be set during TA, ALARM or PTY interrupt.
∗ The factory default setting is “15”.
During a TA, ALARM or PTY interrupt, turn the
[ROTARY] knob clockwise or counterclockwise
to set the volume to the desired level (0 to 33).
∗ When the TA, ALARM or PTY interrupt ends, the
volume returns to the level it had before the interrupt.
∗ The factory default setting is “ENGLISH”.
1. Press and hold the [T] button for 1 second or
longer to switch to the adjustment selection
display.
2. Press the [a] or [d] button and select
“LANGUAGE”.
3. Press the [
] button.
4. Turn the [ROTARY] knob clockwise or counterclockwise to select the desired language.
5. Press the [
] button.
6. Press the [T] button to return to the previous
mode.
DXZ838RMP
19
CD/MP3/WMA Operations
English
MP3/WMA
What is MP3?
MP3 is an audio compression method and classified into audio layer 3 of MPEG standards.
This audio compression method has penetrated
into PC users and become a standard format.
This MP3 features the original audio data compression to about 10 percent of its initial size
with a high sound quality. This means that about
10 music CDs can be recorded on a CD-R disc
or CD-RW disc to allow a long listening time
without having to change CDs.
What is WMA?
WMA is the abbreviation of Windows Media Audio, an audio file format developed by Microsoft
Corporation.
Notes:
• If you play a file with DRM (Digital Rights Management) for WMA remaining ON, no audio is
output.
• Windows Media™, and the Windows ® logo are
trademarks, or registered trademarks of Microsoft
Corporation in the United States and/or other
countries.
●To disable DRM (Digital Rights
Management):
1. When using Windows Media Player 7, click
on TOOLS ➜ OPTIONS ➜ CD AUDIO;
there, uncheck the ENABLE PERSONAL
RIGHTS MANAGEMENT check box, then
construct files.
2. When using Windows Media Player for
Windows XP 8, click on TOOLS ➜ OPTIONS
➜ COPY MUSIC tab, then under COPY
SETTINGS, unclick the check box for
PROTECT CONTENT. Thereafter,
reconstruct files.
Personally constructed WMA files are used
at your own responsibility.
Precautions when creating MP3/WMA disc
● Usable sampling rates and bit rates:
1. MP3: Sampling rate 8 kHz-48 kHz,
Bit rate: 8 kbps-320 kbps / VBR
2. WMA: Bit rate 48 kbps-192 kbps
● File extensions
1. Always add a file extension “.MP3” or
“.WMA” to MP3 or WMA file by using single
byte letters. If you add a file extension other
than specified or forget to add the file extension, the file cannot be played.
20
DXZ838RMP
2. Files without MP3/WMA data will not play.
The indication “––:––” appears in the play
time display if you attempt to play files without MP3/WMA data.
● Logical format (File system)
1. When writing MP3/WMA file on a CD-R disc
or CD-RW disc, please select “ISO9660 level
1, 2, 3 or JOLIET or Romeo” as the writing
software format. Normal play may not be possible if the disc is recorded on another format.
2. The folder name and file name can be displayed as the title during MP3/WMA play but
the title must be within 128 single byte alphabetical letters and numerals (including an extension).
3. Do not affix a name to a file inside a folder
having the same name.
● Folder structure
1. A disc with a folder having more than 8 hierarchical levels will be impossible.
● Number of files or folders
1. Up to 255 files can be recognized per folder.
Up to 500 files can be played.
2. Tracks are played in the order that they were
recorded onto a disc. (Tracks might not always be played in the order displayed on the
PC.)
3. Some noise may occur depending on the type
of encoder software used while recording.
Multisession function
When a disc contains both normal CD type tracks
and MP3/WMA type tracks mixedly, you can select which type of the recorded tracks to play.
● Default value is “CD”.
Each time you press and hold the [BND] button
for about 1 second, the mixed mode is switched
between CD type or MP3/WMA type. The following indication appears in the title display when
switching the track type to be played.
● Display when CD type track is selected:
● Display when MP3/WMA type track is selected:
CD/MP3/WMA Operations
Disc
Setting Set to CD
Radio
(DAB)
CD/MP3/WMA
(DVD deck)
Set to MP3/WMA
(CD changer)
Mixed with CD and
Play CD
Play MP3/WMA
MP3/WMA type tracks
CD type track only Play CD
Play CD
MP3/WMA type track only Play MP3/WMA Play MP3/WMA
2. After making these settings, remove the disc
and then reinsert it.
3. When a mixed mode CD is loaded and CD is
set, the track to be played first is MP3/WMA
file data and no sound is heard.
Disc-In-Play function
As long as the ignition key is turned to the ON or
ACC position, this function allows you to turn the
power to the unit and start playing the disc automatically when the disc is inserted even if the
power is not turned on.
CAUTION
• Do not try to put your hand or fingers in the
disc insertion slot. Also never insert foreign objects into the slot.
• Do not insert discs where adhesive comes
out from cellophane tape or a rental CD label, or discs with marks where cellophane
tape or rental CD labels were removed. It
may be impossible to extract these discs
from the unit and they may cause the unit
to break down.
Backup Eject function
Just pressing the [Q] button ejects the disc
even if the power to the unit was not turned on.
1. Press the [Q] button. Remove the disc after
it is ejected.
Listening to a disc already loaded
in the unit
(MD changer)
AUX
(TV)
(DVD changer)
Loading a CD
1. Press the [Q] button. The SLOPING
CONSOLE opens.
2. Insert a CD into the center of the CD SLOT
with the label side facing up. The CD plays
automatically after loading.
Notes:
• Never insert foreign objects into the CD SLOT.
• If the CD is not inserted easily, there may be another
CD in the mechanism or the unit may require service.
• Discs not bearing the
or
mark and
CD-ROMs cannot be played by this unit.
• Some CDs recorded in CD-R/CD-RW mode may
not be usable.
Loading 8 cm compact discs
∗ No adapter is required to play an 8 cm CD.
∗ Insert the 8 cm CD into the center of the insertion slot.
CAUTION
Be careful not to catch your hand or fingers
while closing the SLOPING CONSOLE.
Notes:
• If the SLOPING CONSOLE does not open fully,
gently open with your hand.
• After loading a CD, always close the SLOPING
CONSOLE.
Pausing play
1. Press the [
] button to pause play.
“PAUSE” appears in the display.
2. To resume CD play, press the [
again.
] button
Press the [FNC] button to select the CD/MP3/
WMA mode.
When the unit enters the CD/MP3/WMA mode,
play starts automatically.
If there is no disc loaded, the indication “NO
DISC” appears in the title display.
∗ The mode changes each time the [FNC] button is
pressed. (Modes are not displayed for equipment
that is not connected.)
DXZ838RMP
21
English
1. Types of recording that can be played are as
follows.
CD/MP3/WMA Operations
English
Displaying CD titles
Folder Select
This unit can display title data for CD-text/MP3/
WMA disc and user titles input with this unit.
1. Press the [D] button to display the title.
2. Each time you press and hold the [D] button
for 1 second or longer, the title display
changes in the following order:
●CD-TEXT disc
User title (disc) ➜ CD-text title (disc) ➜ Artist
name ➜ CD-text title (track) ➜ User title (disc)...
●MP3/WMA disc
Folder ➜ File ➜ Album TAG ➜ Artist TAG ➜
Title TAG ➜ Folder...
Notes:
• If the CD playing is not a CD-text CD or no user
title has been input, “NO TITLE” appears in the
display.
• If MP3/WMA disc is not input TAG, “NO TAG” appears in the display.
• For MP3, supports ID3 Tags V2.3 / 2.2 / 1.1 / 1.0.
• Tag displays give priority to V2.3 / 2.2
• In the case of album Tags for WMA, the information written into the extension header is displayed.
• Only ASCII characters can be displayed in Tags.
This function allows you to select a folder containing MP3/WMA files and start playing from
the first track in the folder.
1. Press [DN] or [UP] button.
Pressing [DN] button to move the previous
play list.
Pressing [UP] button to move the next play
list.
1
Root folder
2
3
4
Selecting a track
●Track-up
1. Press the [d] button to move ahead to the
beginning of the next track.
2. Each time you press the [d] button, the
track advances ahead to the beginning of the
next track.
●Track-down
1. Press the [a] button to move back to the
beginning of the current track.
2. Press the [a] button twice to move to the
beginning of the previous track.
Fast-forward/fast-backward
●Fast-forward
Press and hold the [d] button for 1 second or
longer.
●Fast-backward
Press and hold the [a] button for 1 second or
longer.
∗ For MP3/WMA discs, it takes some time until the
start of searching and between tracks. In addition,
the playing time may have a margin of error.
22
DXZ838RMP
5
∗ Press [UP] button while in the final folder to
shift to the first folder.
∗ Folder without an MP3/WMA file is not selectable.
2. To select a track, press the [a] or [d] of
button.
Top function
The top function resets the CD player to the first
track of the disc. Press the [BND] button to play
the first track (track No. 1) on the disc.
∗ In case of MP3/WMA, the first track of a folder being played will be returned.
Scan play
This function allows you to locate and play the
first 10 seconds of all the tracks recorded on a
disc.
1. Press the [SCN] button to perform scan play.
The indication “SCN” lights up in the display,
and “TRK SCAN” (or “ -SCAN” when
searching for a track in the MP3/WMA file)
appears in the title display for about 2 seconds, then scan play starts.
CD/MP3/WMA Operations
2. To cancel scan play, press the [SCN] button
again.
The play status indication such as “SCN” disappears from the display and the current
track is played.
2. To cancel folder repeat play, press the [RPT]
button again.
The play status indications such “FOLDER”
and “RPT” disappear from the display and
normal play resumes from the track currently
being played.
Random play
Folder scan play
2. To cancel folder scan play, press the [SCN]
button again.
The play status indications such as
“FOLDER” and “SCN” disappear from the
display and the current track is played.
This function allows you to play all tracks recorded on a disc in a random order.
1. Press the [RDM] button to perform random
play.
The indication “RDM” lights up in the display
and “TRK RANDOM” (or “ -RANDOM” when
performing random play for tracks on a MP3/
WMA disc) appears in the title display for about
2 seconds, and then random play starts. The
tracks on the disc are then played in a random
order.
2. To cancel random play, press the [RDM] button again.
The play status indication such as “RDM”
disappears from the display and normal play
resumes from the track currently being
played.
Repeat play
Folder random play
This function allows you to play the current track
repeatedly.
1. Press the [RPT] button to perform repeat play.
The indication “RPT” lights up in the display
and “TRK REPEAT” (or “ -REPEAT” when
performing repeated play for a track in the
MP3/WMA file) appears for about 2 seconds
in the title display, and then repeat play starts.
2. To cancel repeat play, press the [RPT] button
again.
The play status display such as “RPT” disappears from the display and normal play resumes from the track currently being played.
This function allows you to play all the tracks of
all the folders recorded on an MP3/WMA disc in
a random order.
1. Press and hold the [RDM] button for about 1
second to perform folder random play.
The indications “FOLDER” and “RDM” light
up in the display and “ -RANDOM” appear
in the title display for about 2 seconds, and
then folder random play starts.
2. To cancel folder random play, press the
[RDM] button again.
The play status indications such as
“FOLDER” and “RDM” disappear from the
display and normal play resumes from the
track currently being played.
This function allows you to locate and play the
first 10 seconds of the first track of all the folders on an MP3/WMA disc.
1. Press and hold the [SCN] button for about 1
second to folder scan play.
The indications “FOLDER” and “SCN” light
up in the display and “ -SCAN” appears for
about 2 seconds in the title display, and then
folder scan play starts.
∗ Folder scan play starts from the next track after the track currently being played.
Folder repeat play
This function allows you to play a track currently
being played in the MP3/WMA folder repeatedly.
1. Press and hold the [RPT] button for about 1
second to perform folder repeat play.
The indications “FOLDER” and “RPT” light
up in the display and “ -REPEAT” appears
for about 2 seconds in the title display, and
then folder repeat play starts.
Play list mode
This function allows you to play tracks, up to latest 5 time stamps, by reading the play list information written on the disc.
1. Press and hold the [PLAY LIST] button for 1
second or longer to turn on or off the play list
mode.
DXZ838RMP
23
English
∗ Scan play starts from the next track after the
track currently being played.
CD/MP3/WMA Operations
English
∗ Play list play is possible only when there is a
file whose extension is “.M3U” or “.ASX” on
the CD-R/RW.
∗ Up to 5 play lists can be recognized, and up to
255 files can be recognized per play list.
Operations Common to
Each Mode
LCD type
You can setting LCD type NEGA or POSI.
∗ The factory default setting is “LCD NEGA”.
2. Press the [a] or [d] buttons to change the
track.
3. Press [DN] button to move to the previous
play list.
Press [UP] button to move to the next play
list.
Notes:
• The SCN/RPT/RDM functions cannot be used
while in the play list mode.
• The title display changes from folder name to play
list name.
1. Press and hold the [T] button for 1 second or
longer to switch to the adjustment selection
display.
2. Press the [a] or [d] button and select
“LCD TYPE”.
3. Turn the [ROTARY] knob clockwise to “LCD
POSI” and counterclockwise to “LCD
NEGA”.
Making a play list
This unit is provided with the screen saver function which allows you to show various kinds of
patterns and characters in the Operation Status
indication area of the display in a random order.
You can turn on and off this function.
If the button operation is performed with the
screen saver function on, the operation display
corresponding to the button operation is shown
for about 30 seconds and the display returns to
the screen saver display.
1. Write desired tracks to a CD-R/RW, etc. Be
sure to use alphanumeric/ASCII characters
for all file names.
2. Make a play list by using a multimedia
player, etc. and save the data. The file format
must be M3U or ASX.
3. Again, write this play list to the CD-R/RW,
etc.
Notes:
• When writing to a CD-R/RW, etc., be sure to use
alphanumeric/ASCII characters.
• Up to 5 layers can be recognized as a list. For
written play lists, latest 5 lists are recognized in
the order in which they are written.
• When writing to a CD-R/RW, etc., turn off the Disc
At Once function.
• When adding a play list, it is recommended to
write it in the “Root” folder.
Turning the screen saver function
on or off
∗ The factory default setting is “SS RANDOM”.
1. Press and hold the [T] button for 1 second or
longer to switch to the adjustment selection
display.
2. Press the [a] or [d] button and select
“SCRN SVR ”.
3. Press the [
] button.
4. Turn the [ROTARY] knob clockwise or counterclockwise to select the setting. Each time
you turn the [ROTARY] knob, the setting
changes in the following order:
SS OFF ➜ SS PTN1 ➜ SS PTN2 ➜
SS PTN3 ➜ SS MESSAGE ➜ SS RANDOM
] button to store the setting.
5. Press the [
Entering MESSAGE INFORMATION
Message up to 30 characters long can be stored
in memory and displayed for any mode.
∗ The factory default setting is “Welcome to
Clarion”.
1. Press and hold the [T] button for 1 second or
longer to switch to the adjustment selection
display.
2. Press the [a] or [d] button and select
“MSG INPUT ”.
24
DXZ838RMP
Operations Common to Each Mode
Dimmer level
1. Press the [T] button for 1 second or longer
to enter ADJ mode.
2. Press the [a] or [d] button to select the
“DIMMER LV”.
3. Turn the [ROTARY] knob clockwise or counterclockwise to adjust Dimmer level.
4. Press the [T] button to return to the previous
mode.
∗ Adjustment range is off to LV5.
∗ Factory default setting is LV3.
Dimmer in control
You can setting the dimmer in control AUTO or
ILLUMI.
∗ The factory default setting is “DIM-IN AUTO”.
Message display
When the unit is powered on or off, a message
is displayed. The user can turn this message
display ON or OFF.
∗ The factory default setting is “ON”.
1. Press and hold the [T] button for 1 second or
longer to switch to the adjustment selection
display.
2. Press the [a] or [d] button to select “MESSAGE”.
3. Turn the [ROTARY] knob clockwise or counterclockwise to set the message display “ON”
or “OFF”.
4. Press the [T] button to return to the previous
mode.
Setting the method for title scroll
Set how to scroll in CD-TEXT, MP3/WMA Title
or MD.
∗ The factory default setting is “ON”.
1. Press and hold the [T] button for 1 second or
longer to switch to the adjustment selection
display.
2. Press the [a] or [d] button and select
“AUTO SCROLL”.
3. Turn the [ROTARY] knob clockwise or counterclockwise and select “ON” or “OFF”.
● ON:
To scroll automatically.
● OFF:
To scroll just 1 time when the title was
changed or the title key was pressed.
4. Press the [T] button to return to the previous
mode.
1. Press and hold the [T] button for 1 second
or longer to switch to the adjustment selection display.
2. Press the [a] or [d] button to select “DIMMER IN”.
3. Turn the [ROTARY] knob clockwise or counterclockwise and select “DIM-IN AUTO” or
“DIM-IN ILLM”.
4. Press the [T] button to return to the previous
mode.
Selecting the CONTRAST mode
∗ The factory default setting is “8”.
1. Press and hold the button [T] for 1 second
or longer to switch to the adjustment selection display.
2. Press the [a] or [d] button to select
“CONTRAST”.
3. Turn the [ROTARY] knob to select from 118.
4. Press the [T] button to return to the previous
mode.
Anti-theft indicator
The red Anti-theft indicator is a function for preventing theft. When the DCP is removed from
the unit, this indicator blinks.
∗ The factory default setting is “OFF”.
1. Press and hold the [T] button for 1 second
or longer to switch to the adjustment selection display.
DXZ838RMP
25
English
3. Press the [
] button.
4. Press the [a] or [d] button to move the
cursor.
5. Press the [D] button to select a character.
Each time you press the [D] button, the character changes in the following orders:
Capital letters ➜ Small letters ➜ Numbers/
Symbols ➜ Umlaut ➜ Capital letters...
6. Turn the [ROTARY] knob to select the desired character.
7. Repeat step 4 to 6 to enter up to 30 characters for message.
8. Press and hold the [
] button for 2 seconds or longer to store the message in
memory and cancel input message.
Operations Common to Each Mode
English
2. Press the [a] or [d] button and select
“BLINK LED”.
3. Turn the [ROTARY] knob clockwise to set
this function “ON” or turn it counterclockwise
to switch this function “OFF”.
4. Press the [T] button to return to the previous
mode.
Setting the Subwoofer
∗ The factory default setting is “SUB-W ON”.
1. Press and hold the [T] button for 1 second or
longer to switch to the adjustment selection
display.
2. Press the [a] or [d] button and select
“SUB-WOOFER”.
3. Turn the [ROTARY] knob clockwise or counterclockwise and select “ON” or “OFF”.
4. Press the [T] button to return to the previous
mode.
Setting LOW PASS FILTER
1. Press and hold the [T] button for 1 second or
longer to switch to the adjustment selection
display.
2. Press the [a] or [d] button and select
“AUX/TEL”.
3. Turn the [ROTARY] knob clockwise or counterclockwise as needed and select from
“AUX” or “TEL”.
● AUX :
AUX/TEL input cable is for external Audio input.
● TEL :
AUX/TEL input cable is for cellular phone audio input.
4. Press the [T] button to return to the previous
mode.
Selecting AUX IN sensitivity
Make the following settings to select the sensitivity when sounds from external devices connected to this unit are difficult to hear even after
adjusting the volume.
∗ The factory default setting is “THRGH”.
∗ The factory default setting is “AUX LOW”.
1. Press and hold the [T] button for 1 second or
longer to switch to the adjustment selection
display.
2. Press the [a] or [d] button and select
“SUB-W LPF”.
3. Turn the [ROTARY] knob clockwise or counterclockwise to select the setting. Each time
you turn the [ROTARY] knob, the setting
changes in the following order:
THRGH ➜ LPF 50 ➜ LPF 80 ➜ LPF 120
4. Press the [T] button to return to the previous
mode.
1. Press and hold the [T] button for 1 second or
longer to switch to the adjustment selection
display.
2. Press the [a] or [d] button and select
“AUX SENS”.
3. Turn the [ROTARY] knob clockwise or counterclockwise as needed and select from
“AUX HIGH”, “AUX MID” or “AUX LOW”.
4. Press the [T] button to return to the previous
mode.
AUX function
∗ The factory default setting is “RIGHT”.
∗ To output the telephone calls, set the cellular phone
interrupt to ON.
This system has an external input jack so you
can listen to sounds and music from external
devices when connected to this unit.
Selecting AUX/TEL
You can listen to sounds and music from external devices or your telephone calls from the
speakers when connected to this unit.
When TEL INT or External device is connected to
this unit, you can select TEL mode or AUX mode.
∗ The factory default setting is “AUX”.
26
DXZ838RMP
Setting the car speaker output for
the cellular phone
1. Press and hold the [T] button for 1 second or
longer to switch to the adjustment selection
display.
2. Press the [a] or [d] button to select “TEL
SPEAKER”.
3. Turn the [ROTARY] knob clockwise to select
“RIGHT” or counterclockwise to select
“LEFT”.
● RIGHT:
Telephone calls can be heard on the front
right speaker connected to this unit.
Operations Common to Each Mode
Cellular phone interrupt setting
If you connect this unit and your cellular phone
with a separately sold cable, you can listen to
your telephone calls on your car speakers.
∗ The factory default setting is “OFF”.
1. Press and hold the [T] button for 1 second or
longer to switch to the adjustment selection
display.
2. Press the [a] or [d] button to select “TELSWITCH”.
3. Turn the [ROTARY] knob clockwise or counterclockwise to select the setting. Each time
you turn the [ROTARY] knob, the setting
changes in the following order:
OFF ➜ ON ➜ MUTE ➜ OFF...
● OFF:
This unit continues normal operation even
when the cellular phone is used.
Note:
• If conncting a hands-free kit, please ensure the
setting is ON to receive the telephone audio
through the system.
● ON:
You can listen to your telephone calls from
the speakers connected to this unit.
∗ When listening to your calls on your car
speakers, you can adjust the volume by turning the [ROTARY] knob.
● MUTE:
The sound from this unit is muted during
telephone calls.
4. Press the [T] button to return to the previous
mode.
Setting the button illumination
Press the [COLOR] button to select a color
type. Each time you press the [COLOR] button,
the type changes in the following orders:
COLOR SCAN ➜ Indigo Blue ➜ Surf Blue ➜
Silky White ➜ Aqua Green ➜ Fresh Green ➜
Leaf Green ➜ Moon Yellow ➜ Warm Amber
➜ Pale Orange ➜ Passion Red ➜ Vivid Pink
➜ Dark Violet ➜ USER COLOR 1 ➜ USER
COLOR 2 ➜ USER COLOR 3...
●Setting COLOR SCAN mode
As selecting “COLOR SCAN”, the color automatically changes.
∗ The factory default setting is “COLOR SCAN”.
∗ After 3 second the color change to the other.
●Setting USER mode
The factory default setting is “RÎ8 GÎ8 BÎ8”.
As selecting “USER COLOR 1, 2, 3”, press and
hold the [COLOR] button 1 second or longer
“RÎ8 GÎ8 BÎ8” appears in the display.
1. Press the [a] or [d] button to move the
cursor.
2. Turn the [ROTARY] knob to select from 0 to
8.
3. Press and hold the [
] button for 2 seconds or longer to store the color in memory
and cancel setting mode.
COLOR
Indigo Blue
Surf Blue
Silky White
Aqua Green
Fresh Green
Leaf Green
Moon Yellow
Warm Amber
Pale Orange
Passion Red
Vivid Pink
Dark Violet
USER COLOR 1
USER COLOR 2
USER COLOR 3
R
0
0
6
0
0
3
8
8
8
8
8
3
8
8
8
G
0
4
8
8
8
8
6
3
2
0
0
0
8
8
8
B
8
8
8
2
0
0
0
0
0
0
3
8
8
8
8
Setting auto volume
1. Press and hold the [T] button for 1 second or
longer and enter “ADJ” mode
2. Press the [a] or [d] button to select
the”CALIBRATE ”
3. Press the [
] button and “START ” is
displayed.
4. Keep driving speed 50km/h and press the
[
] button.
5. “CALIBRATION” is flush for 2 seconds in
display.
6. If calibration is successful display indicate
“SUCCESSFUL”, or if calibration is not successful display indicate “FAILED”.
DXZ838RMP
27
English
● LEFT:
Telephone calls can be heard on the front left
speaker connected to this unit.
4. Press the [T] button to return to the previous
mode.
Operations Common to Each Mode
English
7. If you failed, repeat steps 3 to 6.
Note:
• When installing this device or transferring it into
another vehicle, for the sake of safety, always
have this work done by the store of purchase or
your nearest Clarion dealer. Installation requires
specialized techniques and experience.
8. Repeat steps 5 to 7 to enter up to 8 characters for the title.
9. Press and hold the [
] button for 2 seconds or longer to store the title into memory
and cancel title input mode.
Clearing titles
Setting auto volume sensitivity
1. Press and hold the [T] button for 1 second or
longer and enter “ADJ” mode
2. Press the [a] or [d] button to select the
“A-VOL SENS”
3. Turn the [ROTARY] knob clockwise or counterclockwise to make the adjustment.
The adjustment steps are below 6 steps, Off
➜ Low ➜ M-L ➜ Mid ➜ M-H ➜ High.
Entering titles
Titles up to 8 characters long can be stored in
memory and displayed for CD, CD changer and
TV stations. The number of titles that can be entered for each mode are as follows.
Mode
CD mode
TV mode
TUNER mode
Number of titles
50 titles
20 titles
30 titles
CD changer mode
DCZ625 connected
CDC655Tz connected
CDC1255z connected
Number of titles
100 titles
100 titles
50 titles
1. Press the [FNC] button to select the mode
you want to enter a title (CD, CD changer or
TV).
2. Select and play a CD in the CD changer or
tune in to a TV station for which you want to
enter the title.
3. Press the [D] button and display the main.
4. Press the [T] button.
5. Press the [a] or [d] button to move the
cursor.
6. Press the [D] button to select a character.
Each time you press the [D] button, the character changes in the following order:
Capital letters ➜ Small letters ➜ Numbers/
Symbols ➜ Umlaut ➜ Capital letters...
7. Turn the [ROTARY] knob to select the desired character.
28
DXZ838RMP
1. Select and play a CD in the CD changer or
tune in to a TV station for which you want to
clear the title.
2. Press the [D] button and display the main.
3. Press the [T] button and switch the display to
the title input display.
4. Press the [BND] button.
5. Press and hold the [
] button for 2 second or longer to clear the title and cancel title
input mode.
English
7. OPERATIONS OF ACCESSORIES
CD/MD Changer Operations
CD/MD changer functions
When an optional CD/MD changer is connected
through the CeNET cable, this unit controls all
CD/MD changer functions. This unit can control
a total of 2 changers. (CD/MD)
Press the [FNC] button and select the CD(MD)
changer mode to start play. If 2 CD(MD) changers are connected, press the [FNC] button to select the CD(MD) changer for play.
∗ If “NO MAGAZINE” appears in the display, insert
the magazine into the CD changer. “LOADING” appears in the display while the player loads (checks)
the magazine.
∗ If “NO DISC” appears in the display, eject the magazine and insert discs into each slot. Then, reinsert
the magazine back into the CD changer.
∗ If “NO DISC” appears in the display, load MDs into
the MD changer.
Note:
• Some CDs recorded in CD-R/CD-RW mode may
not be usable.
CAUTION
CD-ROM discs cannot be played from every
CD changer, it’s depended on the model.
Pausing play
1. Press the [
] button to pause play.
“PAUSE” appears in the display.
] button again.
2. To resume play, press the [
Notes:
• If the CD playing is not a CD-text CD or no user
title has been input, “NO TITLE” appears in the
display.
• If a CD-text CD is not input its disc title or a track
title, “NO TITLE” appears in the display.
Switching disc titles and track titles
(MD)
This unit can display disc titles and track titles
already entered on MDs.
∗ Titles cannot be entered for MDs with this unit.
1. Press [D] button to display the title. The disc
title or track title is displayed.
2. Each time you press and hold the [D] button
for 1 second or longer, the display toggles
between the disc title and the track title.
Note:
• If an MD is not input its disc title or a track title,
“NO TITLE” appears in the display.
Procedure to scroll a title
Set “AUTO SCROLL” to “ON” or “OFF”.
(The factory default setting is “ON”. Refer to the
subsection “Turning the screen saver function
on or off” in section “Operation Common to
Each Mode”.)
●When set to “ON”
The title is automatically kept scrolling.
●When set to “OFF”
Press the [T] button to scroll the title.
Displaying CD titles
This unit can display title data for CD-text CDs
and user titles input with this unit.
∗ Title data for CD-text CDs can be displayed with
this unit only when it is connected to CDC655Tz.
●When connected to CDC655z or CDC1255z.
Press the [D] button to display the title.
●When connected to DCZ625 or CDC655Tz
1. Press the [D] button to display the title.
2. Each time you press and hold the [D] button
for 1 second or longer, the title display
changes in the following order:
User title (disc) ➜ CD-text title (disc) ➜ Artist
name ➜ CD-text title (track) ➜ User title
(disc)…
Selecting a CD
[DN] or [UP] button correspond to a disc load in
the magazine.
Press the [DN] or [UP] button to select the desired disc.
∗ If a CD is not loaded in a slot of magazine, “NO
DISC” appears in the display.
Selecting a MD
[DN] or [UP] button correspond to a MD load in
the MD changer. Press the [DN] or [UP] button
to select the desired disc.
∗ If a MD is not loaded in a slot of MD changer, “NO
DISC” appears in the display.
DXZ838RMP
29
CD/MD Changer Operations
English
Selecting a track
Repeat play
●Track-up
1. Press the [d] button to move ahead to the
beginning of the next track.
2. Each time you press the [d] button, the
track advances ahead to the beginning of the
next track.
●Track-down
1. Press the [a] button to move back to the
beginning of the current track.
2. Press the [a] button twice to move to the
beginning of the previous track.
Repeat play continuously plays the current
track. This function continues automatically until
it is cancelled.
1. Press the [RPT] button. “RPT” lights in the
display and the current track is repeated.
2. To cancel repeat play, press the [RPT] button
again. “RPT” goes off from the display and
normal play resumes.
Fast-forward/fast-backward
●Fast-forward
Press and hold the [d] button for 1 second or
longer.
●Fast-backward
Press and hold the [a] button for 1 second or
longer.
Scan play
Scan play locates and plays the first 10 seconds
of each track on a disc automatically. This function continues on the disc until it is cancelled.
Disc repeat play
After all the tracks on the current disc have
been played, disc repeat play automatically replays the current disc over from the first track.
This function continues automatically until it is
cancelled.
1. Press and hold the [RPT] button for 1 second
or longer. “DISC” and “RPT” light in the display and disc repeat play starts.
2. To cancel disc repeat play, press and hold
the [RPT] button again. “DISC” and “RPT” go
off from the display and normal play resumes
on the current track.
Random play
1. Press the [SCN] button to start track scanning. “SCN” lights in the display.
2. To cancel the scan play, press the [SCN] button again. “SCN” goes off from the display
and the current track continues to play.
Random play selects and plays individual tracks
on the disc in no particular order. This function
continues automatically until it is cancelled.
1. Press the [RDM] button. “RDM” lights in the
display and random play begins.
2. To cancel random play, press the [RDM] button again. “RDM” goes off from the display
and normal play resumes.
Disc scan play
Disc random play
Disc scan play locates and plays the first 10 seconds of the first track on each disc in the currently selected CD (MD) changer. This function
continues automatically until it is cancelled.
The disc random play selects and plays individual tracks or discs automatically in no particular order. This function continues automatically until it is cancelled.
1. Press and hold the [RDM] button for 1
second or longer. “DISC” and “RDM” light in
the display and disc random play starts.
2. To cancel disc random play, press and hold
the [RDM] button again. “DISC” and “RDM”
go off from the display and normal play resumes from the current track.
∗ The scan play is useful when you want to select a
desired track.
∗ Disc scan play is useful when you want to select a
desired CD (MD).
1. Press and hold the [SCN] button for 1 second or longer. “DISC” and “SCN” light in the
display and disc scan play starts.
2. To cancel disc scan play, press the [SCN]
button again. “DISC” and “SCN” go off from
the display and the current track continues to
play.
30
DXZ838RMP
TV Operations
Manual tuning
When an optional TV tuner is connected through
the CeNET cable, this unit controls all TV tuner
functions. To watch TV requires a TV tuner and
monitor.
There are 2 ways available: Quick tuning and
step tuning.
When you are in the step tuning mode, the frequency changes one step at a time. In the quick
tuning mode, you can quickly tune the desired
frequency.
1. Press the [BND] button and select the desired band (TV1 or TV2).
Watching a TV
1. Press the [FNC] button and select the TV
mode.
2. Press the [BND] button to select the desired
TV band (TV1 or TV2). Each time the button
is pressed, the input selection toggles between TV1 and TV2.
3. Press the [a] or [d] button to tune in the
desired TV station.
Watching a video
The TV tuner has a VTR input terminal to which
1 external device can be connected. Connect a
12 V video cassette player (VCP) or video cassette recorder (VCR) to the TV tuner input terminal.
1. Press the [
] button to select VTR.
2. To return to the TV broadcast, press the
[
] button.
Tuning
There are 3 types of tuning mode available,
Seek tuning, manual tuning and preset tuning.
Seek tuning
1. Press the [BND] button and select the desired TV band (TV1 or TV2).
∗ If “MANU” is lit in the display, press and hold
the [BND] button for 1 second or longer.
“MANU” in the display goes off and seek tuning is now available.
2. Press the [a] or [d] button to automatically seek a station. Press the [d] button to
automatically tune up the frequency band to
the next available TV station; press the [a]
button to automatically tune down.
∗ If “MANU” is not lit in the display, press and
hold the [BND] button for 1 second or longer.
“MANU” lights in the display and manual tuning is now available.
2. Tune into a station.
●Quick tuning:
Press and hold the [a] or [d] button for 1
second or longer to tune in a station.
●Step tuning:
Press the [a] or [d] button to manually
tune in a station.
Recalling a preset station
A total of 12 TV stations can be stored (6-TV1
and 6-TV2). This allows you to select your favorite TV stations and store them in memory for
later recall.
1. Press the [BND] button and select the desired TV band (TV1 or TV2).
2. To recall a stored TV station, press the desired [DIRECT] button to select that station.
∗ Press and hold one of the [DIRECT] buttons
for 2 seconds or longer to store the current
station into preset memory.
Manual memory
1. Select the desired station with seek tuning,
manual tuning or preset tuning.
2. Press and hold one of [DIRECT] buttons for
2 seconds or longer to store the current station into preset memory.
Auto store
Auto store selects 6 TV stations automatically
and stores each one into preset memory.
If there are not 6 stations with good reception,
stations previously stored in memory remain
and only the strong stations are stored into
memory.
1. Press the [BND] button and select the desired TV band (TV1 or TV2).
DXZ838RMP
31
English
TV tuner functions
English
TV Operations
Digital Radio/DAB Operations
2. Press and hold the [P/A] button for 2 seconds or longer. The stations with good reception are stored automatically to the preset
channels.
DAB control function
When a CeNET cable is used to connect a DAB
(DAH913 or DAH923) (sold separately), all functions can be operated.
Preset scan
Preset scan allows the user to view each preset
position before it automatically advances to the
next preset. This function is useful for searching
for a desired TV station in memory.
1. Press the [P/A] button.
2. When the desired station is found, press the
[P/A] button again to remain tuned to that
station.
Note:
• Do not press and hold the [P/A] button for 2 seconds or longer. Doing so will trigger the auto store
function and start storing stations into memory.
Setting the TV area
When you select the TV area (TV reception
area), the TV tuner area setting changes.
1. Press and hold the [T] button for 1 second or
longer to switch to the adjustment selection
display.
2. Press the [a] or [d] button to select “TV
AREA”.
] button.
3. Press the [
4. Turn the [ROTARY] knob clockwise or counterclockwise to select the reception area.
5. Press the [
] button.
6. Press the [T] button to return to the previous
mode.
Setting the TV diver
You can change the reception setting for the TV
antenna connected to the TV tuner.
1. Press and hold the [T] button for 1 second or
longer to switch to the adjustment selection
display.
2. Press the [a] or [d] button to select “TV
DIVER”.
3. Turn the [ROTARY] knob clockwise to set to
“ON” or counterclockwise to set to “OFF”.
● ON:
Sets reception emphasizing the visual.
● OFF:
Sets the diver setting to OFF.
4. Press the [T] button to return to the previous
mode.
32
DXZ838RMP
Listening to the DAB station
1. Press the [FNC] button to select the DAB
mode.
2. When the unit receives a DAB station, the
display changes in the following order:
Frequency channel ➜ service label
Switching displays
Press the [D] button to select the desired
display.
Each time you press the [D] button, the display
switches in the following order:
Main display ➜ Clock (CT) display ➜
Main display
Notes:
• The number of programmes and broadcasting
times depend on the DAB stations.
• When the strength of DAB signals is weak, audio
output is muted.
Seek tuning
1. Press the [FNC] button to select the DAB mode.
2. Press and hold the [a] or [d] button for 1
second or longer.
3. “DAB” lights up in the display when the main
unit receives a DAB station.
* The main unit stops the seek tuning when it
cannot find a DAB station. The display returns
to the previous mode.
Manual tuning
1. Press the [FNC] button to select the DAB
mode.
2. Press and hold the [BND] button for 1 second or longer. “MANU” lights up in the display.
3. Press the [a] or [d] button to select a station.
∗ If no operation is performed for more than 7
seconds, manual tuning is cancelled and the
display returns to the previous mode.
Digital Radio/DAB Operations
Recalling a preset programme
1. Press the [FNC] button to select the DAB mode.
2. Press the [BND] button. Each time you press
the [BND] button, the display changes in the
following order:
[M1] ➜ [M2] ➜ [M3] ➜ [M1]...
3. Press one of the [DIRECT] buttons to recall a
preset programme.
Note:
• Press and hold the [DIRECT] button for 2 seconds or longer to store the programme currently
being received. (Manual memory)
Programme scan
This function scans through each receivable
programme in a DAB station being received for
10 seconds sequentially. This is useful when
you want to search for a desired programme.
1. Press the [FNC] button to receive a DAB station.
2. Perform the following operation depending
on the connected model.
Press the [P/A] button. “S-SCAN” lights up
and the unit starts scanning each
programme for 10 seconds sequentially.
Each time the main unit scans, the
programme name is shown in the display.
3. To stop programme scan when a desired
programme is tuned in.
Press the [P/A] button.
Manual memory
The main unit has a manual memory function
for DAB programmes. Up to 18 programmes (6
programmes each) can be preset in the preset
buttons.
[M1], [M2] and [M3]
1. Press the [FNC] button to select the DAB
mode.
2. Press the [BND] button to select any one
shown above.
3. Press the [a] or [d] button to select a desired programme.
4. Press and hold one of the [DIRECT] buttons
(1 to 6) for 2 seconds or longer to store the
programme.
Note:
• The interrupt programme (PTY or INFO) cannot
be written into a manual memory.
AF function
The AF function switches to a different frequency on the same network in order to maintain optimum reception.
∗ The factory default setting is “ON”
∗ If the reception of the current broadcast station deteriorates, “SEARCH” appears in the display and
the radio searches for the same programme on
another frequency.
∗ For details on “AF function”, refer to the section
“RDS operations” of each owner’s manual.
●Switching OFF the AF function
●Switching ON the AF function
●AF function between RDS and DAB
When the same programme is broadcast by
both RDS and DAB, and this function is ON, the
main unit switches to receiving the broadcast
with the better reception automatically.
TA (Traffic Announcement)
In the TA standby mode, when a traffic announcement broadcast starts, the traffic announcement
broadcast is received as top priority regardless of
the function mode. Traffic programme (TP) automatic tuning is also possible.
∗ This function can only be used when “TP” is lit in
the display. When “TP” is lit, this means that the
DAB or RDS broadcast station being received has
traffic announcement programmes.
∗ For details on “TA”, refer to the section “RDS operations” of each owner’s manual.
●Setting the TA standby mode
●Cancelling the TA standby mode
●Searching for a TP station
DXZ838RMP
33
English
Switching programmes
1. Press the [FNC] button to receive a DAB station.
2. Press the [a] or [d] button to switch
programmes in the DAB station.
Note:
• The programme name may be the same depending on DAB programmes.
Digital Radio/DAB Operations
English
Notes:
• If a TP station is not received, the main unit stops
the search operation.
• “TP” may be lit in the display when a TP broadcast is transmitted from an RDS station. In this
case, press the [TA] button to perform TP seek
tuning. Press the [TA] button again to return to
the previous mode.
INFO (Announcement)
In the INFO standby mode, when the selected
announcement programme starts, the main unit
switches to the selected announcement
programme automatically.
●Setting the INFO standby mode
If you press and hold the [TA] button for 1 second or longer, “INFO” lights in the display and
the main unit is set into the INFO standby mode
until the selected announcement is broadcast.
When the selected announcement broadcast
starts, the announcement item appears in the
display. If you press and hold the [TA] button for
1 second or longer while the selected announcement broadcast is being received, the
selected announcement broadcast reception is
cancelled and the main unit goes into the INFO
standby mode.
●Cancelling INFO standby mode
To cancel the INFO standby mode, press and
hold the [TA] button for 1 second or longer.
●Information select
This is a function for selecting INFORMATION
ON or OFF in the Information interrupt mode.
You can set ON up to 6 information items.
You can select any of the 6 items below:
ENGLISH
Travel
Warning
News
Weather
Event
Special
INFORMATION item
Contents
Transport flash
Warning / Service
News flash
Area weather flash
Event announcement
Special event
1. Perform the following operation depending
on the connected model.
Press and hold the [T] button for 1 second
or longer.
34
DXZ838RMP
2. Press the [a] or [d] button to select “INFO
SEL”, then press the [
] button to enter
“INFO SEL” mode.
3. Press the [a] or [d] button to select an information item. You can select any of 6
items:
Travel ➜ Warning ➜ News ➜ Weather ➜
Event ➜ Special ➜ Travel ➜ ...
4. Perform the following operation depending
on the connected model.
Turn the [ROTARY] knob clockwise or
counterclock wise to set the information item
for ON or OFF.
5. Press the [T] button to return to the previous
display.
PTY
This function enables you to listen to the selected programme type, irrespective of the function mode.
∗ One common PTY can be selected for DAB or RDS.
∗ Of DAB PTY and RDS PTY, the PTY which is received earlier takes priority over the other.
∗ PTY broadcasts are not yet available in all countries.
∗ In the INFO standby mode, INFO stations have priority over PTY stations.
∗ In the TA standby mode, TP stations have priority
over PTY stations.
∗ For details on “PTY”, refer to the section “RDS operations” of each owner’s manual.
●Setting the PTY standby mode
●Cancelling the PTY standby mode
●Cancelling a PTY interrupt broadcast
●Selecting PTY
●PTY seek
●PTY preset memory
Emergency broadcast
When an emergency broadcast is received, all
the function mode operations are stopped.
“ALARM” appears in the display and the emergency broadcast can be heard.
∗ For details on “Emergency broadcast”, refer to the
section “RDS operations” of each owner’s manual.
●Cancelling an emergency broadcast
DVD Deck Operations
Switching the PTY and INFO display
language
Operation
You can select one of 4 languages (English,
German, Swedish or French) for the PTY and
INFO shown in the display.
Press the [
] button to select the desired
mode (play, still (pause)).
Each time the button is pressed, the mode
changes cyclically.
●Chapter up/down operation (FF/FB operation)
Press the [d] button for 1 second or shorter to
increment chapters.
Hold down the [d] button for 1 second or
longer to fast forward.
Press the [a] button for 1 second or shorter to
decrement chapters.
Hold down the [a] button for 1 second or
longer to fast backward.
∗ The factory default setting is “ENGLISH”.
∗ For details on “Switching the PTY and INFO display language”, refer to the section “RDS operations” of each owner’s manual.
Volume setting of TA, INFO, emergency broadcast (ALARM) and PTY
The volume for TA, INFO, ALARM and PTY interrupts can be set during TA, INFO, ALARM
and PTY interrupt. Perform the following operation depending on the connected model.
∗ The factory default setting is “15”.
●Play/Still operation
During a TA, INFO, ALARM or PTY interrupt, turn
the [ROTARY] knob clockwise or counterclockwise to set the volume to a desired level (0 to 33).
∗ When the TA, INFO, ALARM or PTY interrupt ends,
the volume returns to the level it had before the
interrupt.
DXZ838RMP
35
English
Digital Radio / DAB Operations
General
Problem
Cause
Fuse is blown.
Replace with a fuse of the same amperage. If the
fuse blows again, consult your store of purchase.
Incorrect wiring.
Consult your store of purchase.
No sound output
when operating
the unit with
amplifiers or
power antenna
attached.
Power antenna lead is
shorted to ground or
excessive current is required
for remote-on the amplifiers
or power antenna.
1. Turn the unit off.
2. Remove all wires attached to the power antenna
lead. Check each wire for a possible short to
ground using an ohm meter.
3. Turn the unit back on.
4. Reconnect each amplifier remote wire to the
power antenna lead one by one. If the amplifiers
turn off before all wires are attached, use an
external relay to provide remote-on voltage
(excessive current required).
Nothing happens
when buttons are
pressed.
The microprocessor has
malfunctioned due to noise,
etc.
Turn off the power, then
press the [RELEASE]
button and remove the DCP.
Press the reset button for
about 2 seconds with a thin
rod.
DCP or main unit connectors
are dirty.
Wipe the dirt off with a soft cloth moistened with
cleaning alcohol.
No sound heard.
The speaker protection circuit
is operating.
1. Turn down sound volume. Function can also be
restored by turning the power off and on again.
(Speaker volume is reduced automatically when
the speaker protection circuit operates).
2. If the sound is muted again, consult our service
department.
No sound heard.
MP3/WMA files are absent
in a disc.
Write MP3/WMA files onto the disc properly.
Files are not recognized as
an MP3/WMA file.
Use MP3/WMA files encoded properly.
File system is not correct.
Use ISO9660 level 1, 2, 3 or JOLIET or Romeo file system.
Disc is dirty.
Clean the disc with a soft cloth.
Disc is heavily scratched or
warped.
Replace with a disc with no scratches.
MP3/WMA files are not
encoded properly.
Use MP3/WMA files encoded properly.
Sound skips or is
noisy.
Sound is cut or
skipped.
Noise is
generated or
noise is mixed
with sound.
36
Measure
Power does not
turn on.
(No sound is
produced.)
Display is not
accurate.
CD/MP3/WMA
English
8. IN CASE OF DIFFICULTY
DXZ838RMP
Reset button
Cause
Measure
English
CD/MP3/WMA
Problem
Sound is bad
directly after
power is turned
on.
Water droplets may form on
the internal lens when the
car is parked in a humid
place.
Let dry for about 1 hour with the power on.
Wrong filename
File system is not correct.
Use ISO9660 level 1, 2, 3 or JOLIET or Romeo file
system.
Play list play is
not performed.
File name or extension is not
correct.
Use alphanumeric/ASCII characters for MP3/WMA
file name.
Use “.M3U” or “.ASX” for the file extension of a play
list.
DXZ838RMP
37
If an error occurs, one of the following displays is displayed.
Take the measures described below to eliminate the problem.
MD changer
CD changer
CD/MP3/WMA
Error Display
DVD changer
English
9. ERROR DISPLAYS
Cause
Measure
ERROR 2
A DISC is caught inside the CD deck and is
not ejected.
This is a failure of CD deck’s mechanism and
consult your store of purchase.
ERROR 3
A DISC cannot be played due to scratches,
etc.
Replace with a non-scratched,
non-warped-disc.
ERROR 6
A DISC is loaded upside-down inside the
CD deck and does not play.
Eject the disc then reload it properly.
ERROR 2
A DISC inside the CD changer is not
loaded.
This is a failure of CD changer’s mechanism
and consult your store of purchase.
ERROR 3
A DISC inside the CD changer cannot be
played due to scratches, etc.
Replace with a non-scratched, non-warped
disc.
ERROR 6
A DISC inside the CD changer cannot be
played because it is loaded upside-down.
Eject the disc then reload it properly.
ERROR H
Displayed when the temperature in the MD
changer is too high and playback has been
stopped automatically.
Lower the surrounding temperature and wait
for a while to cool off MD changer.
ERROR 2
An MD inside the MD changer is not loaded.
This is a failure of MD changer’s mechanism
and consult your store of purchase.
ERROR 3
An MD inside the MD changer cannot be
played due to scratches, etc.
Replace with a non-scratched, non-warped
disc.
ERROR 6
An MD inside the MD changer cannot be
played because it is loaded upside-down.
Eject the disc then reload it properly.
Displayed when a non-recorded MD is
loaded in the MD changer.
Load a pre-recorded MD in the MD changer.
ERROR 2
A DISC inside the DVD changer cannot be
played.
This is a failure of DVD mechanism and consult your store of purchase.
ERROR 3
A DISC cannot be played due to scratches,
etc.
Retry or replace with a non-scratched, nonwarped-disc.
ERROR 6
A DISC inside the DVD changer cannot be
played because it is loaded upside-down.
Eject the disc then reload it properly
ERROR P
Parental level error.
Set the correct Parental level.
ERROR R
Region code error.
Eject the disc and replace correct region
code disc.
If an error display other than the ones described above appears, press the reset button. If the problem
persists, turn off the power and consult your store of purchase.
38
DXZ838RMP
General
Tuning System: PLL synthesizer tuner
Receiving Frequencies:
FM : 87.5 to 108 MHz (0.05 MHz steps)
MW : 531 to 1602 kHz (9 kHz steps)
LW : 153 to 279 kHz (3 kHz steps)
D/A comverter:
24 bit, 128x oversampling, advanced multibit
Output Power: 4 ✕ 31 W (DIN 45324, +B=14.4V)
Power Supply Voltage:
14.4 V DC (10.8 to 15.6 V allowable),
negative ground
Power Consumption: Less than 15 A
Speaker Impedance: 4 Ω (4 to 8 Ω allowable)
Auto Antenna Rated Current: 500 mA or less
Weight:
Main unit: 1.6 kg
Remote control unit: 30 g (including battery)
Dimensions:
Main unit :
178 (W) ✕ 50 (H) ✕ 155 (D) mm
Remote control unit :
44 (W) ✕ 110 (H) ✕ 27 (D) mm
CD player section
System: Compact disc digital audio system
Frequency Response: 5 Hz to 20 kHz (± 1 dB)
Signal to Noise Ratio: 100 dB (1 kHz) IHF-A
Dynamic Range: 95 dB (1 kHz)
Distortion: 0.01%
Note:
• Specifications and design are subject to change without notice for further improvement.
10. CARACTÉRISTIQUES TECHNIQUES
Section radio
Système de syntonisation: Tuner à synthétiseur PLL
Fréquences de réception:
FM : 87,5 à 108 MHz (pas de 0,05 MHz)
PO : 531 à 1602 kHz (pas de 9 kHz)
GO : 153 à 279 kHz (pas de 3 kHz)
Section lecteur de CD
Système:
Système audionumérique de disque compact
Réponse en fréquence: 5 Hz à 20 kHz (± 1 dB)
Rapport signal/bruit: 100 dB (1 kHz) IHF-A
Plage dynamique: 95 dB (1 kHz)
Distorsion: 0,01%
Données générales
Convertisseur N/A :
24 bits, suréchantillonnage 128 fois, Multibits
avancé
Puissance de sortie:
4 ✕ 31 W (DIN 45324, +B = 14,4 V)
Tension d’alimentation:
14,4 V CC (10,8 V à 15,6 V admissible),
masse négative
Consommation: Inférieure à 15 A
Impédance de haut-parleurs:
4 Ω (4 Ω à 8 W admissible)
Courant nominal d’antenne automatique:
500 mA ou moins
Poids:
Appareil principal: 1,6 kg
Télécommande: 30 g (avec le pile)
Dimensions:
Appareil principal:
178 (L) ✕ 50 (H) ✕ 155 (P) mm
Télécommande:
44 (L) ✕ 110 (H) ✕ 27 (P) mm
Remarque:
• La conception et les caractéristiques techniques sont sujettes à modification sans préavis pour des raisons
d’amélioration.
DXZ838RMP
317
Français
Radio section
English
10. SPECIFICATIONS
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising