Impey Showers Limited, Conquest Business Park, Ilton, Somerset

Impey Showers Limited, Conquest Business Park, Ilton, Somerset

Prices and VAT

Prices and VAT are correct at the time of printing. If circumstances mean that you are VAT exempt or a registered charity you will need to complete a VAT exemption form prior to purchasing. To request a form please contact the Impey Showers head office.

Placing an order

All orders must be confirmed by fax, post or email. If the order is received before 2:30pm Impey endeavour to deliver stock orders the next working day. A Saturday morning delivery is possible, but at an additional charge. Contact Customer Services for further details.

Non stock / special orders

For non stock and special order items delivery time scales may be extended. Our sales team can confirm a delivery time when you place your order. Supply of special option doors is typically 3-5 working days. Please note that special order items are non-returnable.

Payment

Accounts payable 30 days from date of invoice to approved customers. Cheques are to be made payable to Impey Showers

Limited. Most credit and debit cards accepted.

Carriage charges

Carriage is included on all orders over £150.00 excluding VAT.

(UK mainland only)

Deliveries

All orders are despatched using a fully insured carrier service. We can arrange delivery anywhere within the UK provided we are supplied with a full postal address and contact telephone number.

Return policy

Every care should be taken when placing your order, but should your goods be deemed unsuitable, we will happily arrange a collection within 30 days of date of invoice, providing your goods are still packaged as new. A small fee may apply for this service and special order items are exempt from this policy.

Product specification

Due to our policy of continual improvement we reserve the right to change product specification without notification.

Lifetime guarantee

Impey Showers Limited guarantees its range of branded showering products against faulty materials or manufacture for a Lifetime, provided that they have been installed and maintained in accordance with the manufacturer’s instructions.

The guarantee extends to non-electrical products in general use and excludes normal wear and tear. For products such as taps, shower valves, bathroom accessories, waterproofing and electrical products, the standard manufacturer’s guarantee will apply. Where products included in the Lifetime guarantee are used for commercial use, such as hospitals, nursing homes or hotels, a 5 year guarantee will be applicable.

Parts that are defined as wearing parts, such as seals, seat pads etc, are subject to a 5 year guarantee.

If in our opinion the product has been modified, neglected, misused or is the subject of accidental damage the guarantee will not be applicable.

Impey Showers Limited has a policy of continuous improvement and therefore reserves the right to revise or amend the specification of any product without notice. In situations where a product has failed, subject to the terms of the guarantee, and a direct replacement is no longer available, Impey Showers Ltd will replace it with the nearest equivalent product.

The liability of Impey Showers Limited does not extend to consequential loss or damage arising from the defective product and is limited to the price of the original goods supplied by

Impey Showers Limited.

The guarantee is in addition to your statutory rights.

Impey Showers Limited, Conquest Business Park, Ilton, Somerset, TA19 9EA

Switchboard: 01460 256 080 Sales: 01460 256 090

Technical Helpline: 01460 258 682 Fax: 01460 259 800 www.impeyshowers.com Email: [email protected]

facebook.com/impeyshowers twitter.com/impeyshowers

A Coram Group Company

ISO9001:2008 ISO14001:2004

May 2012

Care Solutions May 2012

SHOWERING FOR THE CARE MARKET

02

Solutions for every care requirement

Impey Showers has a great heritage. Since we pioneered the Level-Dec wetroom floor former over a decade ago we have continued to innovate and lead the market.

Over 250,000 wetrooms have been successfully installed using Impey products and we are pleased to have improved the lives of many thousands of people.

But wetrooms are not the only thing we offer, there’s also a wide choice of shower trays, shower doors, hand rails, seats and showers, which have been inclusively designed for lifetime homes and are therefore suitable for everyone.

CONTENTS

Why choose Impey? ................................. 4

Shower planning guide ............................ 6

Wetroom floor formers .......................... 8

Shower trays ................................................. 14

Shower doors ............................................... 18

Shower screens ........................................... 23

Shower door options ............................... 24

Cubicles ........................................................... 28

Showers........................................................... 32

Taps ................................................................... 38

Shower seats & hand rails ....................... 40

Curtain rails .................................................... 47

Doc M packs & toilet plinths ................ 48

Automatic shower toilets ...................... 50

Shower drainage options ........................ 52

Electric showers and waste pumps .... 54

Pumped shower drainage ....................... 56

Accessories .................................................... 58

03

Why choose Impey?

Innovations that make life easier

Innovations can be found everywhere across the

Impey range; original ideas that redefine what’s possible, adding value and bringing real installer and customer benefits.

Failsafe quality and reliability

We use only the best materials and rigorous construction methods to ensure the greatest quality and reliability. We are so confident in the long lasting performance of our products that we offer a lifetime guarantee.

Cost saving installation

Most of our products can be easily fitted by a single installer and Impey have a well earned reputation amongst installers thanks to our carefully considered product design, which ensures minimal installation time.

Supply Chain Solutions

Our Supply Chain Alliance can help to ensure the most cost effective and efficient completion of your project. To find out how, please request a copy of our Supply Chain Solutions brochure.

Unbeatable service

All standard products can be dispatched and delivered within 24 hours with timed deliveries.

Special order products can be delivered within

3 to 5 days.

Unrivalled technical support

Every member of the sales team is fully qualified to advise on all aspects of our products and installation. We also have a dedicated Technical

Helpline, which offers you instant access to our unmatched specialist knowledge.

Shower planning guide

Step 1: Shower Floors

If you require level access then creating a wetroom floor using a floor former is the ideal solution.

Step 2: Drainage

Provided that the drainage can be recessed into the floor, you can have any of the Step 1 options.

Waste gullies for gravity drainage are supplied as standard, but we also offer alternative waste gully options including pumped drainage

– see pages 52-53.

Ideal for wooden or solid floors

Level-Dec wetroom floor formers are the easiest way to provide the gradient for efficient drainage of a wetroom floor – see pages 8-11

06

Ideal for new concrete floors

Level-Grade is an alternative option for wetroom installations featuring new pour concrete floors – see page 12-13

As an alternative to wetroom floor formers we offer a range of shower trays, which are available with sloping ramps to provide the easiest access.

For situations where the waste gulley cannot be recessed into the floor we have the Mendip range of trays, where the waste gully is housed in the base of the tray.

Shower trays

We offer a wide range of shower trays with optional ramps – see page 14-17

Shower trays with above the floor drainage

Mendip shower trays allow for the drainage to be housed in the base of the tray. Optional ramps or half height steps are also available – see page 17

Step 3: Shower Doors

Once you have selected the size of wetroom floor former or shower tray you can then choose from a wide range of hinged folding or sliding doors, which can all be supplied left or right handed – see page 18.

Step 4: Showers and Accessories

We offer a wide range of showers, shower seats, hand rails and specialist W/C’s – see pages 32-58.

Fully fitted, self contained cubicles are also available - see page 28-31.

Right hand sliding doors Left hand sliding doors

A complete range of showers and accessories - see pages 32-58

Right hand folding doors Left hand folding doors

Fully fitted, self contained shower cubicles are also available - see page 28-31

07

WETROOM

FLOOR FORMERS

Level-Dec

Level-Dec wetroom floor formers are the easiest way to create the gradient for efficient drainage in a wetroom floor.

They are ideal for wooden or concrete floors and are quick and easy to install, with the strength and rigidity to support up to 300kg.

For full details see back cover

The UK’s leading wetroom specialist

Over 250,000 installations in the UK

Lifetime Guarantee

Drainage

Level-Dec Floor Former provides the gradient for efficient drainage

Note: For concrete floors the Level-Dec is simply recessed into the floor and bedded on a cement mix

LEVEL-DEC

Level-Dec can be trimmed by up to 50mm† on the perimeter. To download an installation guide please visit our website

www.impeyshowers.com

Please note:

when selecting shower doors or a glass panel they need to be located on the inside edge of the 50mm flat border of the Level-Dec, which makes the showering area slightly smaller.

† See specific data for each Level-Dec

320

320

All Level-Decs are supplied with a WSF1/H floor gully within horizontal outlet as standard, which is designed for vinyl floors, for alternative drainage options see page 52.

Wetrooms can also be fitted with tiled floors using a waterproof membrane and a range of drainage options - please see our website for details.

600 600

650 650

900

Size: 900 x 900mm

Max Shower Area: up to 850 x 850mm

Trimable Area: up to 50mm on the external edges

Code: LD16

700 700

1000

Size: 1000 x 1000mm

Max Shower Area: up to 950 x 950mm

Trimable Area: up to 50mm on perimeters

Code: LD2

650 850

1200

Size: 1200 x 1200mm

Max Shower Area: up to 1150 x 1150mm

Trimable Area: up to 50mm on perimeters

Code: LD7

1300

Size: 1300 x 800mm

Max Shower Area: up to 1250 x 750mm

Trimable Area: up to 50mm on perimeters

Code: LD1

740

740

10

1400

Size: 1400 x 900mm

Max Shower Area: up to 1350 x 850mm

Trimable Area: up to 50mm on perimeters

Code: LD6

1500

Size: 1500 x 800mm

Max Shower Area: up to 1450 x 750mm

Trimable Area: up to 50mm on perimeters

Code: LD3

1700

Size: 1700 x 750mm

Max Shower Area: up to 1650 x 700mm

Trimable Area: up to 50mm on perimeters

Code: LD14

1700

Size: 1700 x 850mm

Max Shower Area: up to 1650 x 800mm

Trimable Area: up to 50mm on perimeters

Code: LD15

925

Trimable by 75mm

Trimable by 75mm

1850

Size: 1850 x 900mm

Max Shower Area: variable

Trimable Area: as marked on drawing

Code: LD8

175

800

Size: 800 x 800mm

Max Shower Area: up to 750 x 750mm

Trimable Area: up to 50mm on the external edges

Code: LD5

The LD5 features a structural upstand as part of the design. This is essentially a raised border on 2 sides, which allows the drain to be positioned as close to the corner as possible, whilst maintaining strength and rigidity.

The structural upstand of the LD5 must not be trimmed as this will affect its structural integrity.

For compatible shower door sizes see page 18

LEVEL-DEC ADVANCE

Making installation even easier

Level-Dec Advance solves the potential installation problem of the drainage point being obstructed by joists within timber floors.

A unique and revolutionary Impey drainage feature allows the installer to rotate the drainage point through 360° to any position that will avoid the joist, or other under floor obstructions.

360° rotating centre section designed to allow the trap and gully to avoid joists

All Level-Decs are supplied with a WSF1/H floor gully within horizontal outlet as standard, which is designed for vinyl floors, for alternative drainage options see page 52.

Wetrooms can also be fitted with tiled floors using a waterproof membrane and a range of drainage options - please see our website for details.

Simply place the Level-Dec

Advance where it will be installed and if the trap gully position interferes with a joist, just rotate the centre section until the trap is clear of it and fit the gully.

Level-Dec Advance is supplied with a WSF1/H floor gully with horizontal outlet as standard, for alternative drainage options see page 52.

1050

Adjustable (445 to 625)

Size: 1050 x 1050mm

Code: LDA54

1500

Adjustable (670 to 850)

1200

Adjustable (520 to 680)

Size: 1200 x 900mm

Code: LDA51

Size: 1500 x 1200mm

Code: LDA52

For compatible shower door sizes see page 18

1650

Adjustable (745 to 905)

Size: 1650 x 750mm

Code: LDA53

11

LEVEL-GRADE

The alternative solution

Level-Grade provides a quick and easy alternative way of creating the perfect gradient for concrete solid floors.

Colour coded modular sections quickly click together to form a matrix that you simply fill with screed.

12

1 2 3

First you locate the 600mm square starter section and mark the position of the feet and waste trap.

Chase out the sub-floor to accommodate the waste trap and pipe work.

Assemble and fit the remaining sections, ensuring that each section is level.

Please note that when installing you will need to refer to the full fitting instructions, which are included in every Level-Grade pack

600mm

150mm

4

Fill the matrix with a fairly dry mixed screed and float over the surface so that the ridges of the Level-Grade are just visible.

Note: shuttering required when filling the screed area.

Ø202mm

300mm

All Level-Grade options are supplied as standard with the WSF1/H floor gully with a horizontal outlet. Other drainage options are also available – see page 52.

300mm

450mm

300mm

Adjustable foot

Spacer

Foot mounting plate

Insulation board mounting plate (if required).

Pack of 25 Code: SCR08/2

Standard sizes & bespoke options

Level-Grade is available in eight standard sizes (shown below), or we can provide bespoke options please call our technical advisory team on 01460 258682.

900 1050

Shower door specifications

For shower door specifications please see page 20.

Door options for Level-Grade sizes LG1 - 4 are shown on pages

24-25. For larger sizes LG5 - 8 bespoke doors are required - please supply dimensional drawings.

1200

1200

Size: 900 x 900mm

Code: LG1

1350

Size: 1050 x 1050mm

Code: LG2

1500

Size: 1200 x 900mm

Code: LG3

1500

Size: 1200 x 1200mm

Code: LG4

1800

Size: 1350 x 1350mm

Code: LG5

Size: 1500 x 1050mm

Code: LG6

Size: 1500 x 1500mm

Code: LG7

Size: 1800 x 1200mm

Code: LG8

IMPEy BATH ADAPTER FOR LIFETIME HOMES

Making installation even easier

The government initiative to provide sustainable homes means that those involved with the development of new housing need to consider the impact, both on the environment and the changing needs of the tenant. The lifetime homes* standard will become a mandatory part of the code for sustainable homes and one of the criteria to meet this standard is the provision of drainage that enables a shower to be fitted in the future.

The Impey bath adapter allows you to install a wetroom floor, with a bath above to meet the needs of tenants today, whilst allowing for a simple and economical conversion to a level access wetroom, to suit future requirements.

*In a 176 page document titled ‘Lifetime Homes, Lifetime Neighbourhoods’ the

Department of Health and the Department for Work and Pensions set out a national strategy for housing in an ageing society. The government aims for all public and private sector housing to conform to lifetime homes standards by 2013.

Impey Bath Adapter

Code: TAD/BC

Bath waste trap connects to shower waste gully

58

42

13

SHOWER TRAyS

We offer a wide range of shower trays to suit all types of applications. Our Slimline 35 shower trays are only 35mm high to provide easy access and they are also available with a ramp, which is ideal for wheelchairs.

Our Mendip range is designed to house the waste gully beneath the shower tray, which is ideal for installations where the floor cannot be breached. A separate ramp, or step is also available to provide easier access.

All shower trays come complete with a high quality waste gully.

For full details see back cover

14

Ramps are available to make access easier

15

NEW

SLIMLINE 35 SHOWER TRAyS

The new, most stylish slimline tray from Impey offers a low-level installation only 35mm high

They can also be recessed into the fl oor or fi tted with a sloping ramp around the entire perimeter for easier access. Robust GRP construction will support up to 250kg (40 stone). Service ducting to conceal pipe work is available, which makes installation easier by removing the need to chase out the fl oor or walls.

298mm

298mm

348mm

348mm

397mm

397mm

16

Size: 800 x 800mm

Code: SL358080

27

3mm

498mm

Size: 900 x 900mm

Code: SL359090

498mm

348mm

Size: 1200 x 750mm

Code: SL3512075

27

3mm

540mm

27

3mm

Size: 1200 x 900mm

Code: SL3512090

648mm

Size: 1300 x 750mm

Code: SL3513075

Slimline 35 Service Ducting and Ramp Kit

Size: 1500 x 750mm

Code: SL3515075

Corner piece

Code: SDC/I90

Service ducting

1.5m

Code: SD1

2.4m

Code: SD2

Infil post

Code: DP1

Access Ramp Kit 2m length

Code: 2MR

248mm

Size: 1000 x 1000mm

Code: SL35100100

548mm

Size: 1300 x 700mm

Code: SL3513070

27

3mm

498mm

Size: 1700 x 750mm

Code: SL3517075

(can be cut to length. End cap supplied)

Versatile installation

Can be recessed into floor for level access

Tiling upstand (supplied with each tray)

Corner Section Code: RCS

Waterproof self adhesive tiling upstand

(3.5m roll - 120mm wide)

Code: US12350

All supplied with 90mm trap.

Code: IMOR/H

Alternatives available see page 53

MENDIP SHOWER TRAyS

Built-in waste gully for ease of installation

These are for installations where the floor cannot be breached, as is often the case in situations such as multi-storey apartments.

The waste gully is housed beneath the tray, which is 100mm high. A 50mm half step or a sloping ramp are also available to provide easier access.

Size: 900 x 900mm

Code: MEN501

Size: 1250 x 830mm

Code: MEN201

Size: 1700 x 750mm

Code: SL3517075

(can be cut to length. End cap supplied)

Size: 1500 x 830mm

Code: MEN401

Access Ramp

900mm x 400mm

Code: MEN/R01

Size: 1000 x 1000mm

Code: MEN601

Size: 1500 x 710mm

Code: MEN301

Size: 1250 x 710mm

Code: MEN101

Size: 1850 x 710mm

Code: MEN701 (cut to length version with two end caps supplied - trim with suitable power tool)

50mm Half Step

720mm x 300mm

Code: MEN/P01

Tiling upstand

(supplied with each tray)

Waterproof self adhesive tiling upstand

(3.5m roll - 120mm wide)

Code: US12350

All Mendip trays include a factory fitted waste trap

The compact above ground waste has a swivel outlet for drainage positioning. It has a 40mm outlet and a

50mm water seal. Designed to be used with single feed instantaneous electric showers and medium flow mixer valves.

17

SHOWER DOORS

Unbeatable quality

Impey showers doors are widely recognised as the best and the industry benchmark.

They have been developed from long consultation with both end users and care professionals and are built to the highest standards, with extra safety features such as curved edging and tough anti-shatter panels.

There are many configurations and bespoke options available to answer every customer requirement. Our sliding door sets can also be separated for easy access cleaning.

18

Silver finish is also available for selected bi-fold doors

19

SUPREME SLIDING/FOLDING DOORS

Sliding Doors

Sliding doors are usually specified for alcove configurations (although there are folding options available).

These doors are particularly useful when used with a trimable shower tray/dec as they provide a greater degree of adjustment. Sliding doors can be separated for easy cleaning.

Available in left or right hand configurations.

Right hand sliding doors

Left hand sliding doors

Folding Doors

Folding doors are usually specified for corner configurations and are available with 400mm wide fixed panels and floor to ceiling support pole.

Bi-folding doors are particularly suitable for confined spaces and our patented 360 o full length intermeshing hinge provides greater strength, rigidity and water resistance.

Available in left or right hand configurations.

Option 5 sliding doors with 400mm fixed panel and floor to ceiling pole (left hand option shown)

20

Right hand folding doors

Left hand folding doors

Silver finish is available for a range of Option H folding doors – see selector charts on pages 24-27

Dimensions

All doors are 750mm high with a wide choice of configurations to fit all our Level-Dec,

Level-Grade and shower tray options – see selector charts on pages 24-27.

Special sizes and bespoke designs are available on request - please supply dimensional drawings.

Materials and finishes

A strong and lightweight white powder coated frame with grey handles, trim and flexible floor seals, plus semi-transparent anti-shatter PETG panels. Selected options also available in silver finish (see opposite).

Flexible floor seals

Coloured handles available on request.

Easy to install features

Wall channels allow for

20mm adjustment for out of true walls and our unique coving system on doors provides a faster and neater installation.

Unique coving system

Operating features

All doors have magnetic closing seals with 180˚ rise and fall wall hinges, to lift the flexible floor seal when opening and closing. Hinges on our folding doors are a 360° full length intermeshing design for greater strength. Sliding doors have easy-glide nylon runners, plus they can be easily separated for thorough cleaning.

Rise & fall hinges

360° full length intermeshing bi-fold hinges

Sliding doors separate easily for cleaning

Guaranteed quality

All doors are covered by our lifetime guarantee, (excluding seals which are guaranteed for 5 years).

For full details see back cover

FREESTANDING SCREENS

Lightweight portable freestanding shower screens offer an instant solution for shower areas that do not require a permanent fixture.

750mm high, powder coated frames with grey handles, trim and flexible floor seals.

Semi-transparent, anti-shatter PETG panels.

Freestanding two panel folding screens

Size: 2 x 650mm wide Code: IPS1

Size: 2 x 750mm wide Code: IPS2

Size: 2 x 1000mm wide Code: IPS3

Freestanding four panel folding screen

Size: 2 x 400mm wide +

2 x 225mm wide Code: IPS4

21

NEW

IMPEy FREEDOM SHOWER DOORS

Shower doors that you can open and close at a touch

Impey Freedom offers a unique air assisted hinge, operated by a small lever that lifts the door clear of the floor. This helps to provide smooth operation and prolong the life of the seal. Once closed, a gentle push down secures the door in position and provides the most watertight seal.

Tried and trusted technology

The heart of the Impey Freedom

Shower Door is the spring mechanism.

It is completely maintenance free and covered by a lifetime guarantee, the utmost assurance of its long lasting durability.

For full details see back cover

Class leading features

Impey shower doors are widely recognised as the best in the industry and our new Impey Freedom range is no exception. It features a strong and lightweight white powder coated frame with grey control levers and trim, plus anti-shatter PETG panels. The rubber floor seals also have a unique profile and end insert to ensure the most watertight seal possible.

you have the choice of 4 options which can be supplied in either left or right hand configurations

Options for corners

Options for alcoves

With Impey Freedom you simply press a lever to raise the door off the floor

A quick press on the hand grip returns the door to the floor and secures it in position

22

Option E Option H Option G Option M

The spring mechanism used has been tested for over 40,000 operations without failure

NEW

IMPEy FREEDOM SHOWER DOORS SUPREME GLASS SHOWER PANELS

Luxury combined with practicality

Supreme Glass Shower Panels from

Impey have been designed to bring a truly luxurious finish to your shower room while providing practical support and ease of entry to the shower zone.

Suitable for use with Impey shower trays or wetroom floor systems the

Supreme Glass Shower Panels are 2 metres high and available in 3 widths.

The panels are formed from 8mm safety glass.

For full details see back cover

Note: For areas where a coved vinyl floor covering has been installed you will need to order a coved wall bracket in addition to the screen.

Size options

Size: 760mm code: USC76

Size: 900mm code: USC90

Size: 1200mm code: USC120

Coved wall bracket: CPEP1

Panels are supplied with a 2.6 metre adjustable floor to ceiling support pole that is finished in polished aluminium.

Suitable for use with Impey shower trays and wetroom floor systems.

23

WETROOM FLOOR DOOR OPTIONS FOR CORNERS

All corner options can be supplied with L-shaped curtain rail and curtain.

All door configurations are available left or right handed (left hand illustrated).

Option C

Fixed 750mm wide half height fixed panel, floor to ceiling pole

Option D

Two fixed half height panels, one 400mm on front, with floor to ceiling poles with one door hung from each panel

Floor Former CODE

Level-Dec or

Level-Grade*

SIZE

LD16 or LG1* 900 x 900

LD2 or LG2* 1000 x 1000

LD7 or LG4* 1200 x 1200

LD1

LD6

1300 x 800

1400 x 900

LD3

LD14

LD15

LD8

1500 x 800

1700 x 750

1700 x 850

1850 x 900

Level-Dec

Advance or

Level-Grade*

LD5 with upstand

800 x 800

LDA54

LDA52

LDA53

1050 x 1050

LDA51 or LG3* 1200 x 900

1500 x 1200

1650 x 750

Standard options † Silver door options also available D Freedom door options also available

Option E

400mm fixed half height panel with floor to ceiling pole and a pair of bi-fold doors meeting on corner

D

D

D

D

D

WETROOM FLOOR DOOR OPTIONS FOR ALCOVES

All alcove options can be supplied with straight curtain rail and curtain.

All door configurations are available left or right handed (left hand illustrated).

Option G

Two half bi-fold doors meeting in the middle

Option M

One bi-fold door meeting fixed 400mm panel with floor to ceiling pole

Floor Former CODE

Level-Dec or

Level-Grade*

SIZE

LD16 or LG1* 900 x 900

LD2 or LG2* 1000 x 1000

LD7 or LG4* 1200 x 1200

LD1

LD6

1300 x 800

1400 x 900

LD3

LD14**

LD15**

LD8**

1500 x 800

1700 x 750

1700 x 850

1850 x 900

LD5 with upstand

800 x 800

D

D

D

D

D

D

D

D

D

D

D

Level-Dec

Advance or

Level-Grade*

LDA54

LDA52

LDA53

1050 x 1050

LDA51 or LG3* 1200 x 900

1500 x 1200

1650 x 750

D

D

D

Standard options † Silver door options also available D Freedom door options also available

Option 2

One set of sliding doors hung off one side latching on opposite wall

D

D

D

D

D

D

D

Floor Former CODE SIZE

LD16 or LG1* 900 x 900

LD2 or LG2* 1000 x 1000

LD7 or LG4* 1200 x 1200

LD1

LD6

1300 x 800

1400 x 900

LD3

LD14

LD15

LD8

LDA54

LDA52

LDA53

1500 x 800

1700 x 750

1700 x 850

1850 x 900

LD5 with upstand

800 x 800

1050 x 1050

LDA51 or LG3* 1200 x 900

1500 x 1200

1650 x 750

D

D

D

D

D

Option H

Two half height bi-fold doors meeting on the corner

D

D

D

D

D

D

D

Option J

One bi-fold and single door meeting on the corner

Option 1

Pair of sliding doors meeting on the corner

Option 6

Fixed 400mm half height panel, floor to ceiling pole with pair of sliders meeting a return pair of sliders on the corner

Floor Former CODE SIZE

LD16 or LG1* 900 x 900

LD2 or LG2* 1000 x 1000

LD7 or LG4* 1200 x 1200

LD1

LD6

1300 x 800

1400 x 900

LD3

LD14**

LD15**

LD8**

LDA54

LDA52

LDA53

1500 x 800

1700 x 750

1700 x 850

1850 x 900

LD5 with upstand

800 x 800

1050 x 1050

LDA51 or LG3* 1200 x 900

1500 x 1200

1650 x 750

D

D

D

D

D

D

D

D

D

D

D

D

D

D

Option 3

One fixed half height

400mm panel with floor to ceiling pole and one sliding door hung from opposite wall

Option 4

Pair of sliding doors hung between walls meeting in middle

Option 5

One 400mm fixed half height panel with floor to ceiling pole, one sliding door hung off pole and latching on opposite wall

**Door options for LD14, LD15 and LD8 are only suitable if they are fitted full size (not trimmed to length).

SHOWER TRAy DOOR OPTIONS FOR CORNERS

All corner options can be supplied with L-shaped curtain rail and curtain.

All door configurations are available left or right handed (left hand illustrated).

Option C Option D

Shower tray CODE

Slimline 35

Mendip

SIZE

SL358080 800 x 800

SL359090 900 x 900

SL35100100 1000 x 1000

SL3512075 1200 x 750

SL3512090 1200 x 900

SL3513070 1300 x 700

SL3513075 1300 x 750

SL3515075** 1500 x 750

SL3517075** 1700 x 750

MEN501 900 x 900

Fixed 750mm wide half height fixed panel, floor to ceiling pole

Two fixed half height panels, one 400mm on front, with floor to ceiling poles with one door hung from each panel

MEN601 1000 x 1000

MEN101 1250 x 710

MEN201 1250 x 830

MEN301 1500 x 710

MEN401 1500 x 830

MEN701** 1850 x 710

Standard options † Silver door options also available D Freedom door options also available

Option E

400mm fixed half height panel with floor to ceiling pole and a pair of bi-fold door meeting on corner

D

D

D

D

D

D

SHOWER TRAy DOOR OPTIONS FOR ALCOVES

26

All alcove options can be supplied with straight curtain rail and curtain.

All door configurations are available left or right handed (left hand illustrated).

Shower tray CODE

Slimline 35 SL358080

SIZE

800 x 800

SL359090

SL3512090

900 x 900

SL35100100 1000 x 1000

SL3512075 1200 x 750

1200 x 900

Mendip

SL3513070

SL3513075

SL3515075

SL3517075

MEN501

MEN601

MEN101

MEN201

MEN301

MEN401

1300 x 700

1300 x 750

1500 x 750

1700 x 750

900 x 900

1000 x 1000

1250 x 710

1250 x 830

1500 x 710

1500 x 830

MEN701** 1850 x 710

Option G

Two half bi-fold doors meeting in the middle

D

D

D

D

D

D

Option M

One bi-fold meeting fixed 400mm panel with floor to ceiling pole

D

D

D

D

D

D

D

Option 2

One set of sliding doors hung off one side latching on opposite wall

D

D

D

D

D

D

D

D

SHOWER TRAy DOOR OPTIONS FOR CORNERS

Shower tray CODE

Slimline 35 SL358080

SIZE

800 x 800

SL359090

SL35100100 1000 x 1000

SL3512075

SL3512090

SL3513070

SL3513075

900 x 900

1200 x 750

1200 x 900

1300 x 700

1300 x 750

SL3515075** 1500 x 750

SL3517075** 1700 x 750

Mendip MEN501

MEN601

MEN101

MEN201

MEN301

MEN401

900 x 900

1000 x 1000

1250 x 710

1250 x 830

1500 x 710

1500 x 830

MEN701** 1850 x 710

D

D

D

D

D

D

Option H

Two half height bi-fold doors meeting on the corner

Option J

One bi-fold and single door meeting on the corner

Option 1

Pair of sliding doors meeting on the corner

D

D

D

D

D

D

D

D

**Door options for SL3517075 and MEN701 are only suitable if they are fitted full size (not trimmed to length).

Option 6

Fixed 400mm half height panel, floor to ceiling pole with pair of sliders meeting a return pair of sliders on the corner

Shower tray CODE

Slimline 35 SL358080

SIZE

800 x 800

SL359090

SL3512090

900 x 900

SL35100100 1000 x 1000

SL3512075 1200 x 750

1200 x 900

Mendip

SL3513070

SL3513075

SL3515075

SL3517075

MEN501

MEN601

MEN101

MEN201

MEN301

MEN401

1300 x 700

1300 x 750

1500 x 750

1700 x 750

900 x 900

1000 x 1000

1250 x 710

1250 x 830

1500 x 710

1500 x 830

MEN701** 1850 x 710

D

D

D

D

D

D

D

D

D

D

D

D

D

Option 3

One fixed half height

400mm panel with floor to ceiling pole and one sliding door hung from opposite wall

Option 4

Pair of sliding doors hung between walls meeting in middle

Option 5

One 400mm fixed half height panel with floor to ceiling pole, one sliding door hung off pole and latching on opposite wall

**Door options for SL3517075 and

MEN701 are only suitable if they are fitted full size (not trimmed to length).

Standard options

† Silver door options also available

D Freedom door options also available

27

CUBICLES

The easiest solution

Impey cubicles can be quickly and easily installed with very little site preparation required. They are also the ideal solution for non-permanent adaptations. Each cubicle is purpose built to exact requirements with compact designs to accommodate a shower, hand rails and a shower seat, or larger sizes that contain a complete washroom, including a W/C and handbasin.

28

Shower Toilet Cubicle with W/C and hand basin.

29

Cubicle planning and specifi cations

Step 1: Choose your cubicle

Impey cubicles are available in 2 sided, 3 sided and Shower/Toilet Cubicle (STC) formats and in left or right hand configurations (left hand shown).

Two sided cubicles

Particularly suitable for wheelchair access.

• With option ‘H’ doors

code: CUB2H (state left or right hand option)

• With option ‘J’ doors

code: CUB2J (state left or right hand option)

Three sided cubicles

Ideally suited for enclosed spaces which may not be suitable for side opening doors.

• With option ‘K’ doors

code: CUB3K

• With option ‘G’ doors

code: CUB3G

Step 2: Choice of shower door

Door options for two sided cubicles (left hand shown)

Shower/Toilet Cubicle

For Shower/Toilet Cubicles, a 1500mm shower tray is required. you need to allow an additional 350mm width for the W/C support frame and cistern, which is mounted on the outside of the cubicle, behind an inspection panel. Can be supplied either left or right hand (left hand shown).

• With option ‘K’ doors

code: STC3K

• With option ‘G’ doors

code: STC3G

Shower/Toilet Cubicles are supplied with a support frame to mount the wall hung w/c.

A handbasin with mono block mixer tap is supplied as standard with

Shower/Toilet Cubicles.

Door options for three sided cubicles (left hand shown)

30

Option H

Two half height bi-fold doors meeting on the corner

Option J

One bi-fold and single door meeting on the corner

Option G

Two half bi-fold doors meeting in the middle

Option K

Pair of doors meeting in the middle

Step 3: Optional extras

As optional extras, Impey cubicles can be specified with a roof panel, ceiling light/extractor fan and 3-sided cubicles can be specified with a half glazed side panel if required (please see options below).

Cubicles are supplied with a white hand rail as standard (not shown). Trays, seats, shower and additional hand rails are not included and will need to be specified at the time of ordering.

• Roof with light and fan

code: STC/EXROOF

• Roof only

code: STC/ROOF

• Half glazed side panel

code: no additional cost.

Specify when ordering.

Step 4: Choice of shower tray

There are two styles of shower tray to choose from. For full details please see pages 14-17.

Slimline 35 Shower trays

Only 35mm high to provide easy access and there is also a sloping ramp kit available which is ideal for wheelchairs. For full details please see page 16.

Sizes:

1200 x 750mm

1200 x 900mm

1300 x 750mm

1500 x 750mm*

* required for Shower/Toilet Cubicles

If you have any questions regarding which cubicle and sizes are most suitable for your needs please call our sales team on 01460 256 090

Mendip Shower trays with above the floor drainage

For situations where the drainage cannot be recessed into the floor we offer the Mendip range of trays. The drainage is housed in the base of the tray. These are also available with a sloping ramp, or half height step for easier access. For full details please see page 17.

Sizes:

1250 x 710mm

1250 x 830mm

1500 x 710mm*

1500 x 830mm*

Guaranteed quality and durability

The cubicles are manufactured from durable waterproof panelling to provide a tough, easy clean finish.

Each cubicle construction, including the doors and shower tray, is covered by our lifetime guarantee*

(excludes door seals which are guaranteed for 5 years). All other fixtures and fittings are subject to manufacturers guarantees.

*For full details of lifetime guarantee see back cover.

31

32

SHOWERS

A range to suit all applications

Impey offer a wide selection of showers from a variety of manufacturers, in order to provide you with the best choice for your requirements. The entire range features thermostatic controls, for added safety, plus you have the option of the finest quality mixer showers, or easy to install electric showers.

33

34

MIXER SHOWERS

Mira Select Flex Thermostatic Mixer Shower

Code: MIRASELFLEX

Technical Specification

• Separate flow and temperature controls with

extended levers

• Thermostatic temperature stability for safe

showering of 1°C

• Adjustable maximum temperature setting for

added safety

• Fail safe on hot and cold supplies

• ‘Cool Touch’ shower valve for added safety

• ‘Everclear’ limescale resistant showerhead with

single spray pattern

• Extended riser rail (1m) and 2m hose

• Wall or corner mounting options

• Variable pipe inlet centres (139-153mm)

• Inlet connection: 15mm compression

• Outlet connection: ½” BSP flat face

• Operating pressure range of 0.1 to 5 bar

• Maximum inlet temperature: 65°C

• Minimum temperature differential to achieve

hot or cold failsafe: 12°C

• Suitable for unvented, pressurised, combi-boiler, gravity

fed and mains pressure systems

• Guaranteed for 5 years

Safe Touch Thermostatic

Bar Mixer Shower

Code: ST10010CP

For riser rail and showerhead kits see opposite.

Technical Specification

• Safe touch body

• Separate flow and temperature controls

• Thermostatic temperature stability

• Maximum temperature factory set at 41°C

to prevent scalding

• Fail safe on hot and cold supplies

• Variable pipe inlet centres (130-170mm)

• Inlet connections: G ¾" F BSP

• Outlet connections: G ½" F BSP

• Operating pressure range of 0.2 to 5 bar

• Maximum inlet temperature: 85°C

• Minimum temperature differential to achieve

hot or cold failsafe: 15°C

• Suitable for use with unvented, pressurised, combi

boilers, gravity and mains pressure systems

• Guaranteed for 5 years

Inta Straight Riser Rail and Showerhead

Code: IN32665CP

Mood Riser Rail and Showerhead

Code: IN32770CP

Mood Thermostatic

Mixer Showers

Exposed Code: IN90024CP Concealed Code: IN90025CP

For riser rail and showerhead kits see opposite.

Technical Specification

• Separate flow and temperature controls

• Thermostatic temperature stability

-

• Maximum temperature factory set at

41°C to prevent scalding

• Fail safe on hot and cold supplies

• Inlet pipe centres: 150mm

• Inlet connections: 15mm compression

• Outlet connections: ½" BSP

(15mm compression for concealed valve)

• Operating pressure range of 0.2 to 5 bar

• Maximum inlet temperature: 85°C

• Minimum temperature differential to achieve

hot or cold failsafe: 10°C

• Suitable for use with unvented, pressurised, combi

boilers, gravity and mains pressure systems

• Guaranteed for 5 years

Vista Thermostatic

Mixer Showers

Exposed Code: IN90030CP Concealed Code: IN90032CP

For riser rail and showerhead kits see opposite.

Technical Specification

• Sequential control shower valve for combined control of

temperature and flow

• Thermostatic temperature stability

-

• Single piece thermal cartridge technology

• Maximum temperature factory set at 41°C to

prevent scalding

• Fail safe on hot and cold supplies

• Inlet pipe centres: 150mm

• Inlet connections: 15mm compression

• Outlet connections: ½” BSP

(15mm compression for concealed valve)

• Operating pressure range of 0.2 to 5 bar

• Maximum inlet temperature: 85°C

• Minimum temperature differential to achieve

hot or cold failsafe: 10°C

• Suitable for use with unvented, pressurised, combi

boilers, gravity and mains pressure systems

• Guaranteed for 5 years

Riser Rail and

Showerhead Kits

Inta Straight Riser Rail and Showerhead Code: IN32665CP

Mood Riser Rail and Showerhead Code: IN32770CP

With Safe Touch, Mood and Vista mixer showers you have the option of two styles of riser rail kits.

Technical Specification

• Both riser rail kits have a multi-function spray pattern

showerhead with rub clean nozzles for easy cleaning

• Both riser rail kits have a 2m hose

• Both riser rail kits are guaranteed for 5 years

35

ELECTRIC SHOWERS

36

Mira Advance ATL Flex

9.0kW Code: MIRAFLEX90 9.8kW Code: MIRAFLEX98

Technical Specification

• Separate flow and temperature controls with push button

start/stop and audible bleeps

• Large, colour contrasting rotary controls with raised areas

to aid navigation

• LED backlit flow and on/off buttons and audible click

on temperature lever

• Thermostatic temperature control for added safety

• Colour contrasting panel to aid navigation

• Adjustable maximum temperature setting for added safety

• Phased shutdown reduces limescale and ensures a cool start for added

safety for the next user.

• 4 spray pattern showerhead with rub clean rubber nozzles

for easy cleaning

• Extended riser rail (1m) with wall or corner mounting options and easy

one-handed adjustment of the height of the shower head

• Best in class limescale resistance

• Guaranteed for 2 years, with optional 3 year

extended warranty

For Mira Advance Flex Extra please see page 55

Mira Advance Flex Low Pressure

9.0kW Code: MIRAFLEX/LP90

Technical Specification

• Pumped electric shower - the ideal choice for low pressure sites

• Separate flow and temperature controls with push button

start/stop and audible beeps

• Thermostatic temperature control for added safety

• Four spray pattern showerhead with rub clean rubber nozzles

for easy cleaning

• Extended riser rail (1m) with easy one-handed adjustment of the height of

the shower head, plus additional parking socket

• Best in class limescale resistance

• Guaranteed for 2 years, with optional 3 year

extended warranty

Pack options available with remote control start/stop.

Upgrade kits also available for existing Selectronic

Premier Showers

If you require pumped drainage, please see our specially designed range on page 54

Redring Selectronic Premier Plus

8.5kW Code: SELP85P 9.5kW Code: SELP95P

8.5kW with remote control Code: SELP85PR

9.5kW with remote control Code: SELP95PR

Upgrade remote control Code: SELP/RC

Upgrade receiver Code: SELP/RM

Technical Specification

• Separate temperature controls with large push button

start/stop and audible bleeps

• Clear print control identification for ease of visibility

and legibility

• Large LED temperature readout display

• Thermostatic temperature control for added safety

• Adjustable maximum temperature setting

for added safety

• Eco Water-Save feature that automatically calculates

and adjusts the optimum flow rate.

• Phased shutdown reduces limescale and ensures a cool

start for added safety for the next user.

• Automatic shutdown after 30 minutes of inactivity

• 6 spray pattern shower head with rub clean nozzles

for easy cleaning

• Extended riser rail (1m) with 2m hose

• Guaranteed for 3 years, with optional 2 year

extended warranty

Triton Safeguard T100 Care

8.5kW Code: TRSG

Technical Specification

• Separate temperature control with large push button

start/stop with audible bleeps

• Thermostatic temperature control for added safety

• Maximum temperature stop for added safety

• Phased shutdown reduces limescale and ensures a cool

start for added safety for the next user

• Adjustable timed shutdown allows the shower to

automatically shutdown after a pre-selected time

• 5 spray pattern showerhead with rub clean nozzles

for easy cleaning

• Extended riser rail (1m)

• Guaranteed for 2 years, with optional 3 year

extended warranty

Triton T100E Thermostatic Care

8.5kW Code: TRT1

Technical Specification

• Separate temperature control and push button

start/stop

• Power on and low pressure indicators

• Thermostatic temperature control for added safety

• Adjustable maximum temperature setting

for added safety

• Phased shutdown reduces limescale and ensures a

cool start for added safety for the next user

• 2 spray pattern showerhead with soft spray option

• Extended riser rail (1m)

• Guaranteed for 2 years, with optional 3 year

extended warranty

37

38

TAPS

A choice of control

We offer a wide range of taps with easy to operate leavers, featuring quarter turn ceramic discs for rapid on/off flow.

For added safety and to meet NHS requirements, you will need to fit a thermostatic mixing valve to control the hot supply. Alternatively, we offer a mixer tap that provides full thermostatic control.

Intatherm Thermostatic Mixer Tap

Code: IN1001CP

The alternative solution to fitting a separate thermostic mixing valve

Technical Specification

• Temperature adjustment range: 30°C - 50°C

• Temperature stability of + 2°C

• Operating pressure range of 0.2 to 10 bar

• Maximum inlet temperature: 85°C

• Inlet temperature range: 52°C - 65°C Hot Supply and 5°C - 20°C Cold Supply

• D08 working pressure ranges: 0.2 - 1.0 Low Pressure and 1.0 - 5.0 High Pressure

• Max. Temp. Differential (mix to hot) for failsafe: 10°C

• Maximum pressure inlet differential: 10:1

• Maximum temperature factory set at 41°C to prevent scalding

• Guaranteed for 5 years

Intamix Thermostatic Mixing Valve

15mm Code: IN40015CP 22mm Code: IN40022CP

15mm with isolator valves Code: INMX15CP 22mm with isolator valves Code: INMX22CP

Intamix thermostatic failsafe mixing valves deliver temperature controlled hot water for baths, basins or showers that complies with

NHS Estate D08. They are highly resistant to scaling, with an anti-tamper proof head and are available with 15mm or 22mm connections.

Technical Specification

• Temperature adjustment range: 30°C - 50°C

• Temperature stability of +/- 2°C

• Operating pressure range of 0.2 to 10 bar

• Maximum inlet temperature: 85°C

• Inlet temperature range: 52°C - 65°C Hot Supply and 5°C - 20°C Cold Supply

• D08 working pressure ranges: 0.2 - 1.0 Low Pressure and 1.0 - 5.0 High Pressure

• Max. Temp. Differential (mix to hot) for failsafe: 10°C

• Maximum pressure inlet differential: 10:1

• Maximum temperature factory set at 41°C to prevent scalding

• Guaranteed for 5 years

3" Lever Action Sinks Taps

Code: DLT103

Technical Specification

• Can be fitted with a flow regulator to reduce water wastage

• Minimum working pressure 0.2 bar

• Recommended working pressure 0.3 bar

• Guaranteed for 12 years

3" Lever Action Basin Taps

Code: DLT101

Technical Specification

• Can be fitted with a flow regulator to reduce water wastage

• Minimum working pressure 0.1 bar

• Recommended working pressure 0.2 bar

• Guaranteed for 12 years

3" Lever Action Monobloc Basin Mixer with Pop-up Waste

Code: DLT113

Technical Specification

• Can be fitted with a flow regulator to reduce water wastage

• Minimum working pressure 0.2 bar

• Recommended working pressure 0.3 bar

• Guaranteed for 12 years

Lever Operated Spray Mixer

Code: LO980CP

Technical Specification

• Minimum operating pressure 1 bar

• Maximum operating pressure 5 bar

• Recommended working pressure 2-5 bar

• Maximum inlet temperature 65°C

• Guaranteed for 2 years

39

SHOWER SEATS

& HAND RAILS

For added safety and comfort

All of our seats can be fitted at varying heights, with easy-clean padded vinyl options for extra comfort. The incredibly strong powder coated frames allow the majority of the range to support up to 190kg.

For added safety, we offer a wide selection of hand rails, including our unique and innovative Maxi-Grip range.

40

The innovative Maxi-Grip Plus hand rail system

41

SHOWER SEATS

All of our seats are robust, can be fitted at varying heights and have durable powder coated frames.

Several also have detachable vinyl seat covers

(as indicated) for ease of cleaning.

The seats carry a maximum weight limit of 30 stone (190 kg) unless stated otherwise. Some seats from the range require minimal assembly.

25

Overall Width

Seat Width

Outer Arm Width

Inner Arm Width

Please note all dimensions are approximate

Seat Depth

Distance from wall in raised position

Overall Depth

25

Deluxe Fold Down Shower Seat

Code: S1

Overall Size: W595 x D545mm

Seat Size: W490 x D380 x H440-590mm

Arm Size: W490 (inner) x W595mm (outer)

Distance from wall in raised position: 215mm

Maximum Weight Limit: 30 stone (190kg)

Deluxe Padded Fold Down Shower Seat

Code: S1P

Overall Size: W595 x D545mm

Seat Size: W490 x D380 x H465-615mm

Arm Size: W490 (inner) x W595mm (outer)

Detachable seat covers

Distance from wall in raised position: 215mm

Maximum Weight Limit: 30 stone (190kg)

25

25

42

Fold Down Shower Seat

Code: S2

Overall Size: W490 x D470mm

Seat Size: W460 x D380 x H460-540mm

Distance from wall in raised position: 98mm

Maximum Weight Limit: 30 stone (190kg)

Padded Fold Down Shower Seat

Code: S2P

Overall Size: W490 x D470mm

Seat Size: W460 x D380 x H485-565mm

Detachable seat covers

Distance from wall in raised position: 100mm

Maximum Weight Limit: 30 stone (190kg)

Deluxe Horseshoe Padded Fold Down Shower Seat

Code: S1HP

Overall Size: W610 x D558mm

Seat Size: W437 x D378 x H510-555mm

Arm Size: W505 (inner) x W610mm (outer)

Distance from wall in raised position: 175mm

Maximum Weight Limit: 25 stone (160kg)

Freestanding Shower Chair

Code: S5

Overall Size: W535 x D505mm

Seat Size: W440 x D380 x H480-605mm

Detachable seat covers

Distance from wall in raised position:

100mm Maximum Weight Limit:

15 stone (100kg)

Horseshoe Padded Fold Down Seat

Code: S2HP

Overall Size: W500 x D470mm

Seat Size: W440 x D380 x H505-585mm

Distance from wall in raised position: 90mm

Maximum Weight Limit: 25 stone (160kg)

Freestanding Shower Stool

Code: S6

Overall Size: W510 x D365mm

Seat Size: W395 x D265 x H470-615mm

Distance from wall in raised position: 100mm

Maximum Weight Limit: 30 stone (190kg)

Wide Padded Fold Down Shower Seat

Code: S9

Overall Size: W650 x D510mm

Seat Size: W590 x D420 x H510-580mm

Distance from wall in raised position: 100mm

Maximum Weight Limit: 30 stone (190kg)

Compact Padded Fold Down Shower Seat

Code: S4

Overall Size: W360 x D340mm

Seat Size: W360 x D280 x H500-575mm

Distance from wall in raised position: 65mm

Maximum Weight Limit: 15 stone (100kg)

43

NEW

MAXI-GRIP & MAXI-GRIP PLUS

Maxi-Grip hand rails are a new innovation from Impey and have been developed with the help of the RNIB.

The square profile improves slip resistance, whilst the unique co-polymer extrusion of Maxi-Grip Plus gives the corners of the rails a soft tactile quality for increased grip and comfort.

For full details see back cover

Maxi-Grip can support loads of upto 120kg*. The range also includes a patented adjustable angle system for 90 °, 60°, 45° or 30° angles plus internal and external corners.

*Refers to rails only, not fixings

90° Adjustable Angle can be trimmed to 60°, 45° & 30°

45° can be trimmed to 30°

44

Maxi-Grip Plus

Available in 300, 450, 600 and 900mm lengths

40mm

Maxi-Grip Plus Hand Rail

(White/Grey)

Size: 300mm Code: IGS30G

Size: 450mm Code: IGS45G

Size: 600mm Code: IGS60G

Size: 900mm Code: IGS90G

Maxi-Grip Hand Rail

(White)

Size: 300mm Code: IGC30W

Size: 450mm Code: IGC45W

Size: 600mm Code: IGC60W

Size: 900mm Code: IGC90W

Available in 300, 450, 600 and 900mm lengths

141

45°

141

45°

50mm

152

32mm*

(*35mm for 900mm rail)

90

°

Adjustable Angles

Angle: 45° White

Angle: 45° Grey

Angle: 90° Grey

Code: IGA45W

Code: IGA45G

Code: IGA90W

Code: IGA90G

90° Adjustable Angle can be trimmed to 60°, 45° & 30°

45° can be trimmed to 30°

152

Maxi-Grip

90

°

35mm

90 ° Angle can be used for internal and external corners

50mm

Available in 450 x 450mm

and 600 x 600mm sizes

92mm

90mm

000mm

FLUTED HAND RAILS

40mm

000mm

000mm

000mm

000mm

Engineered from industrial strength plastics, our satin finished fluted hand rails provide exceptionally good grip in wet environments.

Five screw points on each elbow ensure secure and easy wall

For full details see back cover

Available in 300, 450, 600

Available in 300, 450, 600 and 900mm lengths fixing, with screw cover plates

50mm

50mm a neat, easy to clean finish.

40mm

40mm

32mm*

32mm*

Size: 300mm Code: IG1F/Blue

Size: 450mm Code: IG4F/Blue

Size: 600mm Code: IG5F/Blue

White Hand Rails

Size: 300mm Code: IG1F

50mm

Size: 450mm Code: IG4F

Size: 600mm Code: IG5F

Size: 900mm Code: IG6F

40mm

000mm

32mm*

(*35mm for 900mm rail)

000mm

Angular Hand Rails

(white only)

Size: 450mm Code: IG7

Size: 600mm Code: IG8

50mm

450 or 600mm

450 or 600mm

32mm*

32mm

(*35mm for 900mm rail)

450 or 600mm

32mm

50mm

50mm

92mm

450 or 600mm

35mm

Available in 450 x 450mm

Available in 450 x 450mm

and 600 x 600mm sizes

92mm

32mm

000mm

35mm

Floor to Ceiling Pole

(white only)

Code: FCP1

35mm

35mm

90mm

90mm

90mm

PLEASE NOTE:

The Floor to Wall Hand Rail and Floor to Ceiling Pole are manufactured from mild steel with a polyester finish and have an easy grip ribbed surface.

50mm

50mm

Available in 450 x 450mm

and 600 x 600mm sizes

92mm

POLISHED STAINLESS STEEL HAND RAILS

Available in 450 x 450mm

and 600 x 600mm sizes

92mm

90mm solution with a range of beautifully curved or straight designs.

700mm

Floor to Wall Hand Rail

(white only) Code: FWP

35mm

Straight Polished Stainless

Steel Hand Rail

Size: 355mm Code: SSHR355

Size: 480mm Code: SSHR480

Size: 620mm Code: SSHR620

Curved Polished Stainless

Steel Hand Rail

Size: 355mm Code: CSHR355

Size: 480mm Code: CSHR480

Size: 620mm Code: CSHR620

Available in 355, 480, 620 lengths

58mm

32mm

For full details see back cover

45

DROP DOWN RAILS

We have a large range of drop down rails to offer more assistance in the bathroom. Our robust powder coated rails are available in a variety of sizes and have additional optional extras including toilet roll holders and support legs.

The drop down rails are perfect next to your WC, offering that little extra support when required.

Only available in white.

For full details see back cover

250mm

250mm

1000mm

1000mm

550mm or 760m

550mm or 760m m

250mm m

550mm or 760m m

1000mm

Fold Down Rails

Size: 550mm

Size: 760mm

Code: DR1

Code: DR2

Size: 760mm

(with Toilet Roll Holder) Code: DR7

250mm

250mm

1000mm

1000mm

550mm or

550mm or

760m m

250mm

760m m

550mm or

760m m

1000mm

Fold Down Rails

(with supporting leg)

Size: 550mm

Size: 760mm

Code: DR5

Code: DR6

Size: 760mm

(with Toilet Roll Holder) Code: DR8

800mm

800mm

250mm

250mm

105mm

105mm

800mm

250mm

105mm

225mm

225mm

Floor Mounted Post

(to suit any hinged rail

)

Code: DR3

150mm

150mm

46

CURTAIN RAILS & CURTAINS

We have a large variety of curtain rails to suit all requirements.

Our white powder coated aluminium rails come complete with a comprehensive fixing pack, which includes all screws, rawl plugs, ceiling support rods and eyelets.

Shower Rails

Straight Rails

Size: 1300mm Code: SR13

Size: 2000mm Code: SR20

Size: 2500mm Code: SR25

Depths from

900 - 1200mm

For full details see back cover

Window Bridging Kit

Code: WBK1

Installation of a curtain rail can often be hampered by the position of a window. With our Window Bridging Kit this problem has now been successfully addressed. This addition to the curtain rail enables it to be fixed around the window or onto the return wall. It also comes complete with a 1200mm x 1200mm curtain to protect the window and sill from water.

Note: the Window Bridging Kit can form either arrangement as shown below

Shower Curtains

• White only 100% Polyester

• CIBA Antibacterial & Fungal Protection

• Easy care fabric, specially produced for the bathroom

• Machine Washable

• 113 grams weighted hem to ensure good contact with tray or wet floor

• Range of sizes to suit all showering options

Widths from

900 - 1800mm

Corner Rails

White Silver

Size: W900 x D900mm Code: CR0909 Code: CRS099

Size: W1200 x D1200mm Code: CR1212 Code: CRS1212

Size: W1300 x D900mm Code: CR1309 Code: CRS1309

Size: W1500 x D900mm Code: CR1509 Code: CRS1509

Size: W1500 x D1200mm Code: CR1512

Size: W1800 x D900mm Code: CR1809

Widths from

740 - 1330mm

Depths from

860 - 1200mm

U Shaped Rails

Size: W1230 x D900mm Code: UR12390

Size: W1330 x D900mm Code: UR13390

Size: W1450 x D1200mm Code: UR145120

Size: W950 x D950mm

Size: W860 x D860mm

Size: W740 x D810mm

Size: W1150 x D1150mm

Code: UR9595

Code: UR8686

Code: UR7481

Code: UR115115

Size: W1600 x D800mm Code: UR16080

Size: W1000 x D1000mm Code: UR100100

Shower Curtains

(Width x Drop)

Size: W1200 x D1200mm Code: IC1212

Size: W1800 x D1250mm Code: IC180125

Size: W1800 x D1800mm Code: IC1818

Size: W1800 x D2000mm Code: IC1820

Size: W1800 x D2400mm Code: IC1824

Size: W2000 x D1800mm Code: IC2018

Size: W2000 x D2000mm Code: IC2020

Size: W2200 x D1800mm Code: IC2218

Size: W2200 x D2000mm Code: IC2220

Size: W2200 x D2200mm Code: IC2222

Size: W2400 x D1800mm Code: IC2418

Size: W2400 x D2000mm Code: IC2420

47

48

DOC M PACKS

The Impey Doc M Pack is designed to provide a WC facility for wheel chair users. The pack complies with the approved document M of the building regulations 2000 and BS 8300:2001, provided that the WC facility has at least the dimensions, equipment and fittings shown in the low level and close coupled layouts shown below.

The rails shown are also available in blue on request.

Drop Down Rail

Hand Rails

Hand Rails

Hand Rail and Back Pad

195 480*

*Height subject to manufacturing tolerance of WC pan

Height of drop-down rails to be the same as the horizontal hand rails

2200 min.

Alternative door position

750

Low Level Doc M arrangement

With white Rails: Code: DM600WH With blue Rails: Code: DM600BL

WC Suite

Low level pan

Toilets seat (ring only)

6 litre cistern & spatula cistern lever

Rails

5 x 600mm hand rails

1 x hinged support rail with toilet roll holder

1 x backrest & cushion

Washbasin

SF basin brackets x 2

Chrome lever mixer tap

Centre tap hole basin

250 600

1500 x 1500

Wheelchair turning space

Basin

Wall A

TOILET PLINTHS

For wheel chair users and people with limited mobility conventional toilets can be too low and very difficult to use.

The Impey toilet plinths have been designed to raise the existing toilet to account for these needs. Their non-intrusive design allows for greater flexibility in the bathroom and removes the need to purchase a new toilet while remaining discreet.

229

286

213

295

Lantac Certification

The LANTAC certification scheme applies throughout England and Wales. In Scotland submission of the certificate may possibly provide evidence of compliance with Document M requirements.

Drop Down Rail

Hand Rails

Hand Rails

195

480*

*Height subject to manufacturing tolerance of WC pan

Height of drop-down rails to be the same as the horizontal hand rails

2200 min.

Alternative door position

750

Close Coupled Doc M arrangement

With white Rails: Code: DM601WH With blue Rails: Code: DM601BL

WC Suite

Close coupled pan

Toilets seat (ring only)

6 litre cistern & spatula cistern lever

Rails

5 x 600mm hand rails

1 x hinged support rail with toilet roll holder

Washbasin

SF basin brackets x 2

Chrome lever mixer tap

Centre tap hole basin

250 600

1500 x 1500

Wheelchair turning space

Basin

Wall A

229

286

213

229 399

50mm Toilet Plinth Code: IP50

Raises the height of the toilet by 50mm

399

220

399

229

75mm Toilet Plinth Code: IP75

Raises the height of the toilet by 75mm

286

220

389

220

286

399

100mm Toilet Plinth Code: IP100

Raises the height of the toilet by 100mm

456

213

389

456

382

456

289

213

389

295

382

459

465

456

382

213

289

382

295

459

465

295

382

213

465

295

465

295

382

465

465

49

220

289

220

289

389

459

389

459

50

AUTOMATIC SHOWER TOILETS

The Clos-o-Mat Palma Vita Automatic WC shower toilet provides flushing, washing and warm air drying from one simple operation. It is user-friendly for people who have restricted use of their hands. By reducing hand contact, it also provides improved hygiene for all users.

Simultaneous flushing and washing

This unique feature improves personal hygiene - cleaning with water not paper. Can be used at all times as a conventional WC.

Combines functions of a WC and bidet with addition of drying air. UK made in a dedicated plant.

Clos-o-Mat’s unique one touch system allows the user to benefit from the toilet’s automatic functions by just pressing and releasing the flush. Wash time adjustable to client needs.

165

455

B B

210

300

BB = Internal frame size

206

75

730

620

Accessories

There is a range of accessories available for the

Palma Vita automatic WC including seats, integrated fold down support arms, lateral body supports, plinths to raise the height and a touch pad for those who cannot use the flush button. For more information on these accessories please call us on 01460 256090.

The Aquaclean 8000plus Care shower toilet from Geberit combines all the functions of a conventional

WC and bidet with the comfort of warm-air drying. Elegantly designed and with a host of convenient features as standard, it promotes a unique sense of well-being that will benefit people of any age group.

420

420

140-280

735

140-280

735

Push-button or remote control you have the option of push-button controls, or the infra-red remote, where operation is completely hands-free. A sensor simply detects movement and automatically starts the washing and drying sequence.

It will even flush the WC beforehand.

Height Adjustable and Strong

The Aquaclean 8000plus Care can be fitted at a height to suit your needs. Its in-built plinth has been tested up to 64 St (400kg) and the ergonomically shaped seat ensures that transferring and seating is very comfortable. When the seat is lifted the automatic lowering system lowers it gently.

Individually Adjustable

Using the adjustable temperature and pressure regulator, you can set the shower and dryer to your liking. The oscillating shower feature ensures thorough cleaning.

Easy to clean and hygienic

A repellent. The nozzle is rinsed in clean water both before and after each use, plus it is cleaned with a

90

Energy-saving

Fused spur

Fused spur

The Aquaclean 8000plus Care has an energy-saving min. 40 is in use.

0

280

B min. 40

0 min. 40

0

51

DRAINAGE OPTIONS FOR WETROOM FLOORS

Vinyl Wet Floor Shower Waste Gully for Horizontal Drainage

With grey cover and clamping ring Code: WSF1/H

With chrome cover and clamping ring

Code: UCG1/H

A two part shower waste gully for gravity drainage. It is supplied as standard with the Level-Dec wet floor former. It has a 50mm water seal and a 50mm outlet with a 40mm reducer if required.

Available with either grey or chrome cover and clamping ring

Vinyl Wet Floor Shower Waste Gully for Vertical Drainage

With grey cover and clamping ring Code: WSF1/V

With chrome cover and clamping ring

Code: UCG1/V

A two part shower waste gully for gravity drainage. It has a

50mm waterseal and a 50mm outlet.

Available with either grey or chrome cover and clamping ring

200

200

200

89

200

132

91

200

52

89

200

200

86

200

200

200

89

89

200

200

200

Vinyl Wet Floor Shower Waste Gully for Horizontal Drainage

Code:TSG1

89

110

It has a 75mm waterseal and a 50mm outlet with a

40mm reducer if required.

89

200

Vinyl Wet Floor Shower Waste Gully for Vertical Drainage

86

Code: TSG2

A complete shower waste gully for gravity drainage.

200

It has a 75mm waterseal and a 110mm outlet 86

132

86

200

200

200

50

200

200

132

132

200

200

110

110

200

132

132

200

110

110

200

50

50

158

Vinyl Wet Floor Shower Slimline Waste Gully for Horizontal Drainage

Code: SLW1

200

91

Extremely shallow shower waste trap for gravity drainage. Waterless trap

200

With grey cover and clamping ring Code: TAD13

With chrome cover and clamping ring Code: UGP1/P

200

91

91

200

Designed for use with a shower waste pump - please see page 56.

200

158

158

200

158

91

158

91

Available with either grey or chrome cover and clamping ring

200

200

86

200

110

50

158

DRAINAGE OPTIONS FOR SHOWER TRAyS

Slimline 35 Shower tray Waste Gully for Horizontal Drainage

Code: IMOR/H

A high flow shower tray trap with a polished chrome top cover.

It has a 50mm water seal and a 43mm swivel joint outlet.

115

Slimline 35 Shower tray Waste Gully for Vertical Drainage

Code: IMOR/V

A high flow shower tray trap with a polished chrome top cover.

It has a 50mm water seal and a 43mm swivel joint outlet.

115

111

221

56

61

90

Slimline 35 Shower tray Waste Gully for Pumped Drainage

Code: IMOR/P

Shower tray trap with chrome top cover. Designed for use with a shower waste pump kit- please see page 56.

112

49

85

160

Slimline 35 Shower tray Slimline Waste Gully for Horizontal Drainage

Code: SLW/TTI

Extremely shallow shower waste trap for gravity drainage.

Waterless trap design allows use in confined spaces and will not freeze or evaporate.

120

91

221

53

ELECTRIC SHOWERS AND WASTE PUMPS

For drainage that requires a waste pump we offer a choice of four electric showers, which provide a more economical and easy to install solution. These showers can be directly connected to the waste water pump rather than fitting a separate flow switch or sensor, together with the additional wiring connections.

54

Redring Selectronic Thermostatic Electric Shower and Waste Pump Pack

8.5kW Code: SELP85LAP 9.5kW Code: SELP95LAP

This provides everything you need in one pack with a choice of 8.5kW or 9.5kW shower and a low voltage pump, which meets european standards.

It is the only shower to meet the requirements of the Disability

Discrimination Act (DDA).

Technical Specification

• Separate temperature controls with large

push button start/stop and

audible bleeps

• Clear print control identification for ease

of visibility and legibility

• Large LED temperature readout display

• Thermostatic temperature control

for added safety

• Adjustable maximum temperature

setting for added safety

• Eco Water-Save feature that

automatically calculates and adjusts the

optimum flow rate

• Phased shutdown reduces limescale and

ensures a cool start for added safety

for the next user

• Automatic shutdown after 30 minutes

of inactivity

• 6 spray pattern shower head with

rub clean nozzles for easy cleaning

• Extended riser rail (1m)

• Additional time delay adjustment for

pump start-up & over-run

• Minimal maintenance - diaphragm pump

action removes residual shower waste

(hair, grit, gel) without blocking

Mira Advance Flex Extra and Impey Whale Instant

Match Pump Kit

9kW Code: MIRIMM

This kit provides everything you need from an electric shower and waste water pump. Class leading features and pven reliability for complete peace of mind.

Technical Specification (Shower) Technical Specification (Pump)

• Separate flow and temperature controls with

push button start/stop and audible bleeps

• Large, colour contrasting rotary controls with

raised areas to aid navigation

• LED backlit flow and on/off buttons and

audible click on temperature lever

• Thermostatic temperature control for added

safety

• Colour contrasting panel to aid navigation

• Adjustable maximum temperature setting for

added safety

• Phased shutdown reduces limescale and ensures

a cool start for added safety for the next user

• 4 spray pattern showerhead with rub clean

rubber nozzles for easy cleaning

• Extended riser rail (1m) with wall or corner

mounting options and easy one-handed

adjustment of the height of the shower head

• Best in class limescale resistance

• Maximum drainage 8 l/min

• Self priming pump with

protective cover

• Low voltage transformer conforms

to EN60742

• IP 45 rated

• Active Link Diagnostics

• 3 year guarantee extendable to 5

years with free registration

Mira Advance Flex Extra

9kW Code: MIRAFLEXEXTRA 9.0kW

Compatible with Impey Whale Instant Match

Pump Kit SWP/IMM and Pump Kit SWP/WM

(see page 54). Integral sensors ensure the pump flow rate matches the shower flow rate to provide the most efficient drainage.

This also reduces noise output considerably, whilst also reducing wear on the pump.

Technical Specification

• Separate flow and temperature controls with push button

start/stop and audible bleeps

• Large, colour contrasting rotary controls with raised areas

to aid navigation

• LED backlit flow and on/off buttons and audible click

on temperature lever

• Thermostatic temperature control for added safety

• Colour contrasting panel to aid navigation

• Adjustable maximum temperature setting for

added safety

• Phased shutdown reduces limescale and ensures a cool

start for added safety for the next user

• 4 spray pattern showerhead with rub clean rubber

nozzles for easy cleaning

• Extended riser rail (1m) with wall or corner mounting

options and easy one-handed adjustment of the height

of the shower head

• Best in class limescale resistance

Triton Safeguard Care Digilink

8.5kW Code: TRSG/DL8.5

Compatible with Electric Shower Pump Kit

SWP/IMM (see page 56). Integral sensors ensure the pump flow rate matches the shower flow rate to provide the most efficient drainage.

This also reduces noise output considerably, whilst also reducing wear on the pump.

Technical Specification

• Separate temperature control with large push button

start/stop with audible bleeps

• Thermostatic temperature control for added safety

• Maximum temperature stop for added safety

• Phased shutdown reduces limescale and ensures a cool

start for added safety for the next user

• Adjustable timed shutdown allows the shower to

automatically shutdown after a pre-selected time

• 5 spray pattern showerhead with rub clean nozzles

for easy cleaning

• Extra long slide bar

Triton Safeguard T100 Care

8.5kW Code: TRSG

Compatible with Electric Shower Pump Kit

SWP/WM (see page 56)

Technical Specification

• Separate temperature control and push button start/stop

• Power on and low pressure indicators

• Thermostatic temperature control for added safety

• Adjustable maximum temperature setting

for added safety

• Phased shutdown reduces limescale and ensures a cool

start for added safety for the next user

• 2 spray pattern showerhead

• Extended riser rail (1m)

55

PUMPED DRAINAGE

Shower Waste Pump Kits can be fitted when gravity drainage is not an option. The pump is activated by a flow switch installed in the water supply to the shower. When the shower is turned on water passes through the flow switch, activating the pump. Alternatively we offer two pumps that are controlled directly by a connection to an electric shower, without the need for a flow switch.

Impey Whale Switch Connect Kit

Code: SWP

This is the original waste pump kit and has been successfully installed in over 150,000 homes across the UK.

Technical Specification

• Maximum drainage for electric showers 8l/min

• Maximum drainage for mixer showers 12ltrs per minute

(additional mixer valve conversion kit required) SWP/MX

• Self priming pump with protective cover

• Low voltage transformer conforms to EN60742

• 12 adjustable settings for electric & mixer showers

• Active link diagnostics

• Variable speed settings for electric & mixer showers

• De-puddling cycle: pump turns on for a brief period,

15 min after shower is turned off

• IP45 Rated

• 3 year guarantee extendable to 5 years with free

registration

Impey Whale Smoothflow Shower

Waste Pump Kit

Code:SWP/SFC

Quiet operation, because the speed is regulated depending on the flow rate of water from the shower. This reduces noise output considerably, whilst also reducing wear on the pump.

Technical Specification

• Automatically adjusts to changes in shower flow rate

• Compensates for changes in voltage from main

electric supply

• Maximum drainage 12l/min

• Additional flow sensor is required for mixer showers

• Self priming pump with protective cover

• Low voltage transformer conforms to EN60742

• IP45 Rated

• 3 year guarantee extendable to 5 years with free

registration

Impey Whale Instant Match

Mira Kit

Code: SWP/IMM

Designed to be specifically compatible with the Mira Flex Extra Electric Shower (shown on page 55). A digital signal from the Mira Advance

Extra automatically adjusts the pump speed in relation to the shower flow rate.

56

Technical Specification

• Maximum drainage 8 l/min

• Self priming pump with protective cover

• Low voltage transformer conforms to EN60742

• IP 45 rated

• Also compatible with Safeguard Care Digilink

• Active Link Diagnostics

• 3 year guarantee extendable to 5 years with free

registration

Impey Whale Direct Connect Kit

Code: SWP/WM

This is designed to be compatible with the Mira

Flex Extra and Triton Safeguard Care (shown on page 54-55), which will control the pump without the need of a separate flow switch.

Technical Specification

• Maximum drainage 8 l/min

• Self priming pump with protective cover

• Low voltage transformer conforms to EN60742

• IP 45 rated

• Active Link Diagnostics

• 3 year guarantee extendable to 5 years with free

registration

All our pumped kits are suitable for wetroom floors or shower trays and include all the fittings needed for a single feed electric shower installation, but please note that for mixer showers you will need a Mixer Shower

Conversion Kit (see below) and for wetfloors you will require a TAD 13 shallow waste gully (see page 52).

Pump Service Kit

Code: SWPDT

Suitable for:

Impey Whale shower waste pump Ref: SWP

Impey Whale Smoothflow pump Ref: SWP/SFC

Impey Digital shower waste pump Ref: IDP

Also includes two

22mm push-fit fixtures

Mixer Shower Conversion Kit for

SWP Pump

Code: SWP/MX

When fitting the pump in conjunction with a mixer shower this mixer shower conversion kit is required.

Suitable for:

Impey Whale shower waste pump Ref: SWP

Mixer Shower Flow Sensor Venturi for SWP/SFC

Code: SWP/SFSMK2

When fitting the pump in conjunction with a mixer shower an additional flow sensor is required.

Suitable for:

Impey Whale Smoothflow pump Ref: SWP/SFC

15mm Flow Switch Kit

Code: SWP/FS

Suitable for:

Impey Whale shower waste pump Ref: SWP

Spare Pump Head

Code: SWP/PH

Suitable for:

All Impey Whale shower waste pumps

Spare Pump Only

Code: SWP/PO

Suitable for:

Replacement of all Impey Whale shower waste pumps

57

PUMPED DRAINAGE

58

Impey Digital Shower Waste

Pump

LH Code: IDP/LHMK2 RH Code: IDP/RHMK2

Quiet operation when in use, with the added advantage of being sealed in a watertight IP55 rated casing, which allows it to be sited in the showering area if required.

Technical Specification

• Maximum drainage 12ltrs per minute

• Pumps up to 3m vertically

• Tough IP55 rated water-tight box

• Fully CE tested and approved

• Adjusts to changes in shower flow rate

• Filter free operation for low maintenance

• Separate models are available for left or right hand feeds

• IP 55 rated

• 1 year guarantee

Mixer Shower Flow Sensor for IDP Pumps

Code: SWP/FSFMK2

When fitting the pump in conjunction with a mixer shower an additional flow sensor and filter are required.

Suitable for:

Impey Digital Shower Waste Pumps

Ref: LH Code: IDP/LHMK2 RH Code: IDP/RHMK2

ACCESSORIES

Xpelair LV100T

Extractor Fan

Code: LV100T

Technical Specification

• Suitable for splash zone 1

• Single speed 12V SELV axial unit and

remote SELV transformer

• Adjustable timer function (2-20mins)

• Includes universal mounting kit and

air operated backdraught shutter

• Air Movement: 85m3/hr 24 litres

per second

• Max Wattage: 13w

Apres Body Dryer

Code: BODyDRyER

The Apres Body Dryer is a complete all-over body dryer .

Tested to rigorous safety standards, it fits neatly into most bathing and shower areas and helps make towels a thing of the past.

Technical Specification

• Voltage: 220/240V

• Normal Output: 2.9kW

• Average Air outlet

temperature: 21oC

• 2 speed on/off air switch

• ABS plastic construction

• Tested to EN60 335-2-23 1990

• Sound Level: 70dB

Pump Transformers

Code: SWP/TMK2

Suitable for:

Impey Smoothflow pump Code: SWP/SFC

Impey shower waste pump Code: SWP/WM

Code: SWP/IMT

Suitable for:

Impey Whale Instant Match Mira Kit Code:

SWP/IMM

NOTES

59

Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Related manuals