PLL1500M
PLL1500M
LED LCD Monitor
USER'S GUIDE
www.planar.com
Content
Operation Instructions ................................................................................................................................................... 1
Unpacking Instructions ................................................................................................................................................. 3
Safety Precautions ........................................................................................................................................................... 3
Package Overview ........................................................................................................................................................... 5
First Setup ........................................................................................................................................................................... 6
Front View of the Product ............................................................................................................................................ 7
Rear View of the Product .............................................................................................................................................. 8
Quick Installation ............................................................................................................................................................. 9
Basic Operation.............................................................................................................................................................. 10
Advanced Operation—OSD Menu......................................................................................................................... 12
Supporting Timing Modes ........................................................................................................................................ 15
Technical Information ................................................................................................................................................. 16
Wall-mount instruction .............................................................................................................................................. 17
Care and Maintenance ................................................................................................................................................ 18
Troubleshooting ............................................................................................................................................................ 18
Planar Support ............................................................................................................................................................... 19
Operation Instructions
Thank you for purchasing this LED LCD Monitor, a high-resolution multi-scan color LED LCD
Monitor.
Please read this guide thoroughly before installation.
FCC RADIO FREQUENCY INTERFERENCE STATEMENT
WARNING: (FOR FCC CERTIFIED MODELS)
This LED LCD Monitor has been tested and found compliant with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide proper
protection against harmful interference to a residential installation. This LED LCD Monitor
generates, uses, and can radiate radio frequency energy. Harmful interference to radio
communication may be led as a result if it‘s not properly installed and used. However, there is no
guarantee that interference will not occur in a particular installation. If this LED LCD Monitor
does cause serious interference to radio or television reception, resetting the LED LCD Monitor
may determine it. Moreover, users are encouraged to correct interference by doing one or more
of the following:
 Reorient or relocate the receiving antenna.
 Move the LED LCD Monitor and the receiver further away from each other.
 Connect the LED LCD Monitor into an outlet on a circuit different from that to which the
receiver is connected.
 Consult your local dealer or an qualified technician.
FCC Warning:
To assure a continued FCC compliance, a user must use a grounded power supply cord and the
provided shielded video interface cable with bonded ferrite cores. Also, any unauthorized
changes or modifications to this LED LCD Monitor would void the user‘s authority to operate this
device.
Note: If necessary, shielded interface cables and AC power cord must be used to meet the
emission level limits.
1
COMMUNIQUE D’AVERTISSEMENT DE LA FCC CONCERNANT LES INTERFERENCE DE
FREQUENCE RADIO: (SEULEMENT POUR MODELES CERTIFIE PAR LA FCC)
Ce moniteur a été testé et à été trouvé conforme aux limites pour un appareil numérique de
Classe B, suivant la partie 15 des règlements de la FCC. Ces limites ont été développées pour
offrir une protection satisfaisante contre les interférences nuisibles dans une installation
résidentielle. Ce moniteur génère, utilise et peut radier de l’énergie de fréquence radio. Ceci
peut causer des interférences nuisibles à des communication radio si l’appareil n’est pas
convenablement installé et utilisé. Il n’y à néanmoins aucune garantie que des interférences
n’apparaîtront pas dans une installation particulière. Si ce moniteur cause de sérieuses
interférences à la réception de signaux radios ou télévisées, une possibilité est de réinitialiser le
moniteur. Les usagers sont aussi encouragés à corriger les interférences en appliquant une ou
plusieurs des démarches suivantes:




Réorientez ou déplacez l’antenne de réception.
Placez le moniteur et le récepteur plus loin l’un de l’autre.
Connectez le moniteur à une prise différente de celle à laquelle le récepteur est connecté.
Consultez votre revendeur local ou un technicien qualifié.
Avertissement de la FCC:
Pour assurez une conformité continue au règlements de la FCC, l’utilisateur doit utiliser un
cordon d’alimentation mis à terre et le câble d’interface vidéo protégé avec noyaux en ferrite,
fourni avec l’appareil. Chaque modification ou changement non-autorisé appliqué à ce moniteur
peut faire perdre à l’utilisateur sont droit d’opération de cet appareil.
Note: Si nécessaire, des câbles d’interface protégés et un cordon d’alimentation alternante
doivent être utilisé pour être conforme aux limites d’émission.
Important Waste Disposal Information
Please recycle or dispose of all electronic waste in accordance with local, state, and federal laws.
Additional resources can be found online at http://www.planar.com/about/green/.
The crossed-out wheelie bin symbol is to notify consumers in areas subject to Waste Electrical and
Electronic Equipment (WEEE) Directive 2012/19/EU that the product was placed on the market
after August 13, 2005 and must not be disposed of with other waste. Separate collection and
recycling of electronic waste at the time of disposal ensures that it is recycled in a manner that
minimizes impacts to human health and the environment. For more information about the proper
disposal of electronic waste, please contact your local authority, your household waste disposal
service, or the seller from whom you purchased the product.
2
Unpacking Instructions
 Move the LED Monitor out of the package and take off the plastic bag and Polystyrene Foam.
 Pull the base from Parallel versus Panel to Vertical.
 Adjust the Panel between-1° leaning forward and 20° leaning backward.
Safety Precautions
Follow all warnings, precautions and maintenance as recommended in this user’s manual to
maximize the life of your unit.
Do:
 Turn off the product before cleaning.
 Touch screen surface may be cleaned using a soft clean cloth moistened with mild window
glass commercial cleaners or 50/50 mixture of water and isopropyl alcohol.
 Use a soft cloth moistened with mild detergent to clean the display housing.
 Disconnect the power plug from AC outlet if the product is not going to be used for an
extended period of time.
Don’t:
 Do not touch the LED Display screen surface with sharp or hard objects.
 Do not use abrasive cleaners, waxes or solvents for your cleaning.
 Do not operate the product under the following conditions:
o Over 16 hours per day.
o Extremely hot, cold or humid environment.
o Areas susceptible to excessive dust and dirt.
o Near any appliance generating a strong magnetic field.
o In direct sunlight.
 If smoke, abnormal noise or odor emits from your Touchscreen LED Monitor, remove the
power cord immediately and call your service center.
 Never remove the rear cover of your Touchscreen LED Monitor. The display unit inside
contains high-voltage parts and may cause electric shock.
 Never try to repair your Touchscreen LED Monitor yourself. Always call your service center or a
qualified technician to fix it.
 Due to safety concerns, if the VESA mounting kit is purchased separately, please
make sure the mounting kit is UL-listed, and replaceable only by service personnel.
3
Consignes de sécurité
Respectez tous les avertissements, les précautions et conseils d’entretien recommandés dans ce
manuel de l’utilisateur pour maximiser la durée de vie de votre appareil.
A faire :
 Éteindre le produit avant de le nettoyer.
 La surface de l'écran tactile peut être nettoyée avec un chiffon doux et propre imprégné
d’un nettoyant doux du commerce pour vitres ou d'un mélange à 50/50 d'alcool
isopropylique et d'eau.
 Utilisez un chiffon doux imprégné d'un détergeant doux pour nettoyer le carter de
l'affichage.
 Débranchez la fiche d’alimentation de la prise de courant secteur si le produit ne doit pas
être utilisé pendant une période prolongée.
A ne pas faire :
 Ne touchez pas la surface de l’écran LED avec des objets coupants ou durs.
 N'utilisez pas des produits de nettoyage abrasifs, de la cire ou des solvants pour le
nettoyage.
 N’utilisez pas le produit dans les conditions suivantes :
o Plus de 16 heures par jour.
o Environnement extrêmement chaud, froid ou humide.
o Endroits poussiéreux ou sales.
o Près d’appareils générant un fort champ magnétique.
o Sous la lumière directe du soleil.
 Si de la fumée, un bruit anormal ou une odeur s'échappait de votre moniteur LCD LED,
débranchez immédiatement le cordon d'alimentation et appelez votre centre de réparation.
 Ne retirez jamais le couvercle arrière de votre moniteur LCD LED. L’unité d’affichage contient
des éléments où circule un voltage élevé et présentant un risque d'électrocution.
 N’essayez jamais de réparer vous-même votre moniteur LCD LED. Faites toujours appel à
votre centre de service ou à un technicien qualifié pour toute réparation.
 Pour des raisons de sécurité, si vous achetez séparément le kit de fixation VESA,
assurez-vous que celui-ci est certifié UL, et qu’il peut être remplacé uniquement par
un technicien qualifié.
4
Package Overview
LED LCD Monitor
Base
Power Cord
VGA Signal Cable
Audio Cable
User’s Guide
5
First Setup
Install the stand base
1. Place the monitor face down on a soft cloth or cushion on a table.
2. Install the stand base to the monitor.
Disconnecting the Stand Base
1. Place the monitor face down on a soft cloth or cushion on a table.
2. Press the 4 tenons inwardly and pull the stand base to remove.
6
Front View of the Product
①
② ③
④ ⑤ ⑥
①
OSD Turn On/ Off
②
Brightness */ Auto */Scroll Down/ Adjust Decrease
③
Blue Light Reducer */ Scroll UP/ Adjust Increase
④
Confirm Selection
⑤
Power On/ Off
⑥
LED Indicator
* Hot keys Instructions please see "Using the OSD Menu" on page 10.
7
Rear View of the Product
①
②
①
Power Input
②
Audio Input
③
VGA Input (D-Sub 15 pin)
③
8
Quick Installation
1. Connect either VGA Video Source from the monitor to the computer. Make sure both
monitor and computer are powered OFF.
2. Connect the audio cable from audio output of computer to the audio input of the monitor.
3. Connect the power cord to a properly grounded AC outlet, then to the monitor.
4. Power-ON computer and then POWER-ON the monitor.
Set the timing mode on your computer. Recommended resolution and refresh rate is
1024X768 @ 60 Hz.
Example:
PC
Audio cable
Power cable
VGA cable
9
Basic Operation
Before using the TFT LCD Monitor:
Connect external equipments properly.
Insert the power plug, and the power LED indicator will light orange.
Power On/Off
To turn the TFT LCD Monitor on/off:
Press POWER button on the front of TFT LCD Monitor. The power LED indicator lights blue when
the TFT LCD Monitor is on.
Using the OSD Menu
You are able to use OSD menus to adjust various settings by using menu button on the front of
the TFT LCD Monitor.
The basic operation is as following:
1
2
Displays main menu
Exits from OSD menu
Confirm the selection
Select the desired item when in OSD menu
▼
When not in OSD menu, directly enters BRIGHTNESS Menu, press 3 seconds
enters AUTO IMAGE ADJUST
Select the desired item when in OSD menu
▲
When not in OSD menu, directly toggles Blue Light. (OFF, VIDEO, WEB
BROWSING, READING, LOW LIGHT)
▼+▲
Recalls both Contrast and Brightness (when not in OSD menu)
OSD Lock Out Function
When LED LCD Monitor is in normal mode, the “OSD Lock Out” function can be enabled.
Option 1: OSD lock – all 4 buttons are locked except the “POWER” button.
Press and hold the 1 button and the ▲ button for 3 seconds to lock the OSD buttons.
The LED LCD Monitor will show an “OSD LOCKED” message for 3 seconds and the message will
disappear automatically.
Repeat this step to unlock.
10
Option 2: OSD & Power button lock – all 5 buttons including the “POWER” button are locked.
Press and hold the 1 button and the ▼ button for 3 seconds to lock all 5 buttons.
The LED LCD Monitor will show a “POWER BUTTON LOCKED” message for 3 seconds and the
message will disappear automatically.
Repeat this step to unlock.
11
Advanced Operation—OSD Menu
You can use the OSD menu to adjust various settings for your TFT LCD Monitor.
Press the 1 button to display the OSD Menu, and use ▲▼ to select the desired OSD menu.
Short Cuts Function from the button(s)
AUTO IMAGE ADJUST: To auto adjust Horizontal Position, Vertical Position, Phase (Fine
Tune) and Clock (H. Size) of the screen.
CONTRAST: To adjust the foreground white level of screen image.
▲: increase contrast, ▼: decrease contrast.
BRIGHTNESS: To adjust the luminance of the video.
▲: increase brightness, ▼: decrease brightness.
ECO MODE : Allows the user to turn the ECO On or Off. Brightness adjustment disabled
when ECO is active.
AUDIO ADJUST: To adjust the audio functions.
VOLUME: To adjust the volume of speaker output.
MUTE: To turn the Mute ON/OFF.
COLOR ADJUST : To select the color for improving brightness and color saturation
12
between 9300K, 6500K, 5400K and USER COLOR.
9300K: Adds blue to screen image for cooler white.
6500K: Adds red to screen image for warmer white and richer red.
5400K: Adds green to screen image for a darker color.
USER COLOR: Individual adjustments for red (R), green (G), blue (B).
1. Press button 2 to select the desired color.
2. Press ▲ or ▼ button to adjust selected color.
BLUE LIGHT REDUCER: To decrease the blue light emitted from the display to reduce
the risk of blue light exposure to your eyes. (Contrast, Color Temperature-Cool, Normal,
Warm, User Color and Picture Mode adjustment will be disabled when Blue Light
Reducer is active.)
Press ▲ or ▼ key to adjust the Blue Light Reducer strength.
- VIDEO – Ideal for watching videos (15% reduction)
- WEB BROWSING – Ideal for web browsing (30% reduction)
- READING – Ideal for reading (50% reduction)
- LOW LIGHT – Ideal for low ambient lighting environments (70% reduction)
INFORMATION : To display the information, regarding the current input signal coming
from the graphic card in your computer.
Note: See your graphic card user guide for more information about changing the
resolution and refresh rate.
MANUAL IMAGE ADJUST: To manually adjust the H. /V. POSITION, HORIZONTAL SIZE,
FINE TUNE, SHARPNESS, VIDEO MODE ADJUSTMENT and PICTURE MODE.
H./V. POSITION : To adjust the horizontal and vertical position of the video.
HORIZONTAL POSITION: ▲: move screen to the right, ▼: move screen to the left.
VERTICAL POSITION: ▲: move screen up, ▼: move screen down.
HORIZONTAL SIZE: To adjust the width of the screen image.
▲: increase the width of screen image, ▼: decrease the width of screen image.
FINE TUNE: To adjust the delay time of data and clock.
Press ▲ or ▼ to adjust to your preference.
SHARPNESS: To adjust the clarity of a non- XGA Resolution (1024x768) signal with ▲
or ▼ button.
PRESET MODE: Provides an optimum display environment depending on the contents
displayed. It contains 5 user-selectable presets.
STANDARD is for general windows environment and monitor default setting.
GAME optimized for PC game environment.
CINEMA optimized for movie and video environment.
SCENERY optimized for displaying outdoor scenery images.
13
TEXT optimized for text editing and viewing in a word processing environment.
SETUP MENU: To set up LANGUAGE SELECT, OSD POSITION, OSD TIME OUT and OSD
BACKGROUND.
LANGUAGE SELECT: To allow users to choose from available languages.
OSD POSITION: Press ▲ or ▼ button to select between horizontal and vertical OSD
Position adjustment.
HORIZONTAL POSITION: To horizontally adjust the OSD position.
▲: move OSD to the right, ▼: move OSD to the left.
VERTICAL POSITION: To vertically adjust the OSD position.
▲: move OSD up, ▼: move OSD down.
OSD TIME OUT: To automatically turn off On Screen Display (OSD) after a preset period
of time.
OSD BACKGROUND: Allows the user to turn the OSD background On or Off.
MEMORY RECALL : To recall factory settings for Video & Audio controls.
Press button 2 to select the Memory Recall menu option.
14
Supporting Timing Modes
STANDARD
VGA
VGA
MAC
VESA
VESA
VESA
VESA
VESA
VESA
MAC
VESA
VESA
VESA
RESOLUTION
720 x 400 @ 70Hz
640 x 480 @ 60Hz
640 x 480 @ 67Hz
640 x 480 @ 72Hz
640 x 480 @ 75Hz
800 x 600 @ 56Hz
800 x 600 @ 60Hz
800 x 600 @ 72Hz
800 x 600 @ 75Hz
832 x 624 @ 75Hz
1024 x 768 @ 60Hz
1024 x 768 @ 70Hz
1024 x 768 @ 75Hz
Warning: Do not set the graphic card in your computer to exceed these maximum refresh rates.
Doing so may result in permanent damage to your monitor.
Avertissement : Ne réglez pas la carte graphique de votre ordinateur en dépassant ces taux de
rafraîchissement maximaux. Si vous le faites, cela va irrémédiablement détériorer votre moniteur.
15
Technical Information
Panel
15” TFT(with LED backlight)
Power Management
On: 8 Watts (typical), 12 Watts (maximum)
Standby Mode: < 0.5 Watt
Off: < 0.5 Watt
Displayable Resolution
XGA 1024 x 768 max. Vertical Frequency 75 Hz max.
Pixel Dimension
0.297 x 0.297 mm
Display Color
16.2M
Tilt
-1° ~ 20°
Active Display Area
304 mm x 228 mm
Temperature
Operating: 0°C ~ +40°C
Storage: -20°C ~ + 60°C
Compliance
FCC, CE, WEEE, UL/cUL
Power
Input Voltage AC100-240 V
Speaker
1W x 2
16
Wall-mount instruction
Preparing To Install The Optional Wall Mount Arm (not included)
This LED LCD monitor can be attached to a wall mounting arm you can purchase separately.
Turn the power OFF then disconnect the cables from the LED LCD monitor before performing
the procedure below.
1. Lay the LED LCD monitor face down on a soft surface.
2. Remove hinge cover. (A strong pull, as indicated by arrow, is required to remove.)
3. Remove the four screws holding the stand to the hinge.
4. Remove the stand.
Attaching The Optional Wall Mount Arm (not supplied)
Follow these steps to finish installing the wall mounting arm:
1. Place the wall mounting arm onto the back of the TFT LED
LCD Monitor. Line up the holes of the arm with the holes in
the back of the monitor.
2. Insert the 4 screws into the holes and tighten.
3. Reconnect the cables. Refer to the User’s Guide that came
with the optional wall mounting arm for instructions on
attaching it to the wall.
NOTE
 75mmx75mm VESA high hole (n=4), M4, pitch =0.7 mm screw
mounting kit not included.
17
75mm x 75mm Screw
Mounting Options
4mm, 0.7 pitch
threaded holes x 4
Care and Maintenance
Care
 Avoid exposing your LED LCD monitor directly to sunlight or other heat source. Place your
LED LCD monitor away from the sun to reduce glare.
 Put your LED LCD monitor in a well ventilated area.
 Do not place any heavy things on top of your LED LCD monitor.
 Make certain your LED LCD monitor is installed in a clean and moisture-free area.
 Keep your LED LCD monitor away from magnets, motors, transformers, speakers, and TV sets.
Note
 Move the LED out of the package and take off the plastic bag and Polystyrene Foam.
 Pull the base from Parallel versus Panel to Vertical.
 Adjust the Panel within 0 degree leaning forward and 20 degree leaning backward.
Safety Tips
 If smoke, abnormal noise or odor came out from your LED LCD monitor, caution you should
remove the power cord immediately and call your service center.
 Si de la fumée, un bruit anormal ou une odeur s'échappait de votre moniteur, débranchez
immédiatement le cordon d'alimentation et appelez votre centre de service.
 Never remove the rear cover of your LED LCD monitor cabinet. The display unit inside
contains high-voltage parts and may cause electric shock to human bodies.
 Never try to repair your LED LCD monitor yourself. Always call your service center or a
qualified technician to fix it.
Troubleshooting
No power
 Make sure A/C power cord is securely connected to the power adapter and the power supply
is firmly connected to the LED LCD monitor.
 Plug another electrical device into the power outlet to verify that the outlet is supplying
proper voltage.
 Make sure all signal cables are installed.
Power on but no screen image
 Make sure the video cable supplied with the LED LCD monitor is tightly secured to the video
output port on back of the computer. If not, tightly secure it.
 Adjust brightness.
Wrong or abnormal colors
 If any colors (red, green, blue) are missing, check the video cable to make sure it is securely
connected. Loose or broken pins in the cable connector could cause an improper connection.
 Connect the LED LCD monitor to another computer.
18
Planar Support
Cables and Accessories
To find cables and accessories for your Planar monitor, touch screen or other Planar products
visit our online store at www.PlanarOnline.com
Technical Support
Visit Planar at http://www.planar.com/support for operations manuals, touch screen drivers,
warranty information and access to Planar's Technical Library for online troubleshooting.
To speak with Planar Customer Support please have you model and serial number available and
dial:
Planar Support
Tel: 1-866-PLANAR1 (866-752-6271) or +1 503-748-5799 outside the US.
Hours: 24 hours a day, 7 days a week.
Toll or long distance charges may apply.
19
Planar, a Leyard company
01/2017 Planar, a Leyard company
Planar, a Leyard company.
P/N:300110001046000
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising