User's Manual - HDTV Solutions

User's Manual - HDTV Solutions
IFC230-cov
3/01/06
15:51
Page 1
Manuel d’utilisation
Bedienungsanleitung
Manuale di utilizzazione
User manual
Manual de utilización
Manual de utilização
Gebruiksaanwijzing
Bruksanvisning
IFC230-cov
3/01/06
15:51
Page 2
IFC230_EN
3/01/06
11:19
Page 1
Contents
Getting started
Advanced functions
Important information ....................................................................2
Safety ....................................................................................................2
Care ......................................................................................................2
LCD TV ................................................................................................2
Plasma TV ............................................................................................2
Hanging the TV set on the wall ......................................................2
Switching on ......................................................................................3
Remote control TV functions ..........................................................4
Playing files from memory cards ....................................................4
Using the remote control for other equipment ............................4
Programming the remote control ..................................................4
Programming the volume control function ..................................5
Adjusting the sound ........................................................................10
Tone control ....................................................................................10
Headphone settings ........................................................................11
Adjusting the picture ......................................................................11
Other settings ................................................................................12
PIP - PAP..........................................................................................13
Operation ..........................................................................................13
Setting the time ..............................................................................14
Setting the time and date ..............................................................14
Using the calendar ..........................................................................14
Programming the sleep timer........................................................14
Programming the wake-up timer ................................................15
Parental control ..............................................................................15
Definign a PIN code........................................................................15
Locking a channel or AV programme ..........................................16
Locking the buttons on the TV set ..............................................16
Locking the Time menu..................................................................16
Locking the Installation menu ......................................................16
Operation (TV mode) ....................................................................16
Customising your television ..........................................................17
Preferences........................................................................................17
Configuring AV sockets ..................................................................17
Playing files from memory cards ..................................................18
Other functions................................................................................19
Teletext ............................................................................................20
Accessing Teletext............................................................................20
Navigator ..........................................................................................20
Other Teletext functions ................................................................20
Program Info (programme guide) ............................................21
Accessing the programme guide ..................................................21
Storing programmes........................................................................21
Checking your selections on the Events screen ......................22
Operation (TV mode) ....................................................................22
Channel set-up
Initial set-up ......................................................................................6
Manual channel set-up ......................................................................7
General operation
Switching the TV set on and off ......................................................8
Accessing channels............................................................................8
Accessing your favourite channels ..................................................8
Accessing AV programmes ..............................................................8
Volume ..............................................................................................8
Displaying status information ..........................................................8
Zoom ..................................................................................................9
List of channels ..................................................................................9
Freezing a picture ............................................................................9
Flat batteries ....................................................................................9
Product information ........................................................................9
Other information
Sockets ............................................................................................23
Connecting active speakers or an amplifier ................................24
Connecting headphones ................................................................24
Connecting a video recorder ........................................................24
This symbol means that your inoperative electronic
appliance must be collected separately and not mixed with
the household waste.The European Union has implemented
a specific collection and recycling system for which
producers are responsible.
This appliance has been designed and manufactured with high quality
materials and components that can be recycled and reused. Electrical and
electronic appliances are liable to contain parts that are necessary in
order for the system to work properly but which can become a health
and environmental hazard if they are not handled or disposed of in the
proper way. Consequently, please do not throw out your inoperative
appliance with the household waste.
If you are the owner of the appliance, you must deposit it at the
appropriate local collection point or leave it with the vendor when
buying a new appliance.
- If you are a professional user, please follow your supplier's instructions.
- If the appliance is rented to you or left in your care, please contact
your service provider.
Help us protect the environment in which we live!
This manual applies to several TV set models. Some features may not be
available on the model you purchased. Refer to the feature table
provided with this manual to find out the main features of the relevant
model.
Optional functions are indicated by the following symbol: The model number of your TV set is on a label at the back of the set
and on the cover of this manual.
In the interest of improving the quality of our products, we reserve the
right to modify their features.The information in this manual is,
therefore, subject to change and does not represent any kind of
contract.
This publication is printed on recycled paper.
1
EN
IFC230_EN
3/01/06
11:19
Page 2
Getting started
Important information
EN
Safety
LCD TV
Ensure that your domestic mains supply voltage matches the
voltage indicated on the identification sticker located at the
back of your set.This TV set is a class 1 appliance. It must be
connected to an electrical wall socket with an earth.
The LCD panel used in this product is made of glass.
Therefore, it can break when the product is dropped or
impacted upon by other objects.
The LCD panel is a very high technology product, giving you
finely detailed pictures. Occasionally, a few non-active pixels
may appear on the screen as a fixed point of blue, green or
red.This does not affect the performance of your product.
The TV set's components are sensitive to heat.The maximum
ambient temperature should not exceed 35° Celsius. Do
not cover the vents at the back or sides of the TV set. Leave
sufficient space around it to allow adequate ventilation. Install
the appliance away from any source of heat (fireplace, ...) or
appliances creating strong magnetic or electric fields.
Plasma TV
In order to ensure long performance of your set and reduce
the risk of screen burning, please observe the following
precautions.
Moisture in rooms where the set is installed should not
exceed 85% humidity. If you have to use the TV set outdoors,
do not expose it to rain or splashing water. Do not
place any object containing a liquid (vase, glass, bottle,
etc.) on or near the set. Moving the set from a cold place to a
warm one can cause condensation on the screen (and on some
components inside the TV set). Let the condensation evaporate
before switching the TV set on again.
- Do not display for lengthy periods of time still images (still
computer and video game images, logos, pictures, text) or
images in formats which do not fill the entire screen;
- Use a screen saver when using a computer;
- When displaying tables, graphics, etc.:
- decrease the contrast and brightness of the picture as much
as possible,
- display pictures with many colours and grading of colours
(photographs),
- adjust contrast to obtain the least noticeable transition
between dark and light areas (white characters on a black
background).
The
button at the side of the TV set can be used to
switch it on and put it into standby mode. If you are not
going to be watching the TV for a lengthy period of
time, switch it off completely by removing the plug from the
mains power socket.
During thunderstorms, we recommend that you disconnect
the TV set from the mains and aerial so that it is not affected
by electrical or electromagnetic surges that could damage it.
For this reason, keep the mains and aerial sockets
accessible so they can be disconnected, if necessary.
Screen burns are not covered by the warranty.
The plasma panel is a very high technology product, giving you
finely detailed pictures. Occasionally, a few non-active pixels
may appear on the screen as a fixed point of blue, green or
red.This does not affect the performance of your product.
Unplug the TV set immediately if you notice it giving off a
smell of burning or smoke.You must never, under any
circumstances, open the TV set yourself, as you run the risk of
an electric shock in doing so.
Hanging the TV set on the wall
Before setting up your television set, make sure that the
surface you want to put the set on can support its weight (see
the list of specifications provided with the booklet). Don’t place
the set on an unstable surface (e.g. moving shelf, very edge of a
unit) and make sure that the front of the television set does
not overhang the surface it is sitting on.
Warning:This operation requires two people.
THOMSON disclaims any liability for damages
caused by the TV set being installed inappropriately.
Please observe the following safety instructions to make sure that
the TV set is hung on the wall safely.
Check that the wall can support the weight of the TV set and
wall mount.
Care
Use a glass-cleaning product to clean the screen and a soft
cloth and mild detergent to clean the rest of the set.
Important: Using strong detergents, alcohol-based and
abrasive products may damage the screen.
Follow the fitting instructions supplied with the wall mount.
Hang the TV set on a vertical wall.
Use screws that are suitable for the material the wall is made
of.
Dust the vents at the back and sides regularly. Using solvents,
abrasive or alcohol-based products could damage the TV set.
Arrange the TV set's connection cables so that they don't pose
a risk of anyone falling over them.
If an object or liquid enters inside the appliance, unplug it
immediately and have it checked by an authorised engineer.
In addition, all the other safety instructions concerning the use of
our TV sets remain completely valid
Never open the appliance yourself since this may put you at
risk or damage the appliance.
THOMSON disclaims any liability if the TV set is not used
in accordance with this manual.
2
IFC230_EN
3/01/06
11:19
Page 3
Getting started
Switching on
Follow the instructions on this page on how to switch on your TV set and the remote
control before going on to following pages describing how to use the remote control and
the channel set-up procedure.
1. Insert two LR06 or AA batteries in the remote control.
Precautions on using batteries:
- Only use the battery types specified.
- Make sure you use the correct polarity.
- Do not mix new and used batteries.
- Do not use rechargeable batteries.
- Do not expose batteries to excessive heat, throw them in a fire, recharge them or try to open
them, as this could cause them to leak or explode.
- Remove the batteries from the remote control if you are not using it for a long period of time
(several weeks).
220 - 240 V ~ 50/60 Hz
2. Connect the power cable FIRST to the television, THEN to a mains socket.
Mains socket in
continental Europe
Your TV set should only be connected to a 220 - 240 V ~ 50/60 Hz AC supply.
It must not be connected to a DC supply. If the plug is detached from the cable, do not, under
any circumstances, connect it to a mains socket, as there is a risk of electric shock.
Equipment for the UK and Ireland is supplied with a mains cable fitted with a moulded
plug.
5A
This plug contains safety components and must not be replaced by one sold by general
retailers. It is fitted with a fuse that protects your television. If your set has stopped
working, the fuse may have blown. If it has, replace it with an identical ASTA or BSI
certified (BS1362) 5-amp fuse.
3. Connect the outside aerial or cable network to the TV Antenna socket at the back
of the TV set.
The aerial socket (75 Ohms - VHF / UHF / cable) can be used for connecting an external aerial
or other equipment fitted with a modulator (video recorder, satellite receiver, etc.).
We recommend that you do not connect other equipment (video recorder, satellite receiver, etc.)
to your TV set to begin with, so as not to complicate the set-up procedure with the additional
steps involved. Connect them when you have finished setting up the channels by referring to
page 23 of this manual.
4. Switch the TV on by pressing the
button located on the side.
Note: The first time you switch on the television, the language selection menu appears.
You will find a description of how to use the remote control on page 4.Then go to page 6
for information on the initial set-up, or to page 7 for information on manual set-up (if the
channels have already been set up on your TV).
Note: Before connecting other devices to the AV sockets, carry out the initial channel set-up
(described on page 6) in order to avoid any problems with equipment selection.
Please respect the environment and the relevant regulations. Before you dispose of
batteries (or accumulators), ask your dealer whether they require special recycling and if
he is able to take them back.
3
EN
IFC230_EN
3/01/06
11:19
Page 4
Getting started
EN
Remote control TV functions
Playing files from memory cards
Most of your television’s functions are available via the menus that
appear on the screen.The remote control supplied with your set
can be used to navigate through the menus and to configure all the
general settings.
When playing mp3,WMA, JPEG, MPEG and DivX files, you can use
some of the buttons on the remote control to perform certain
functions, which vary according to the type of file.
INFO To display the Info menu.
REVERSE mp3 and WMA: to return to the previous file.
JPEG: to reduce the projection speed.
PLAY To play.
FORWARD mp3 and WMA: to go on to the next file.
JPEG: to increase the projection speed.
STOP To stop playing.
PAUSE To pause, stop at a particular picture.
MPEG and DivX: to change files.
0-9 MPEG and DivX: to select a file by its number.
Standby / quit standby.
TV To access TV mode. Press this button to control the
television.
VCR To access VCR mode.
DVD To access DVD mode.
SAT To access SAT mode.
AUX To access AUX mode.
AMP To access AMP mode.
PIP To enable the PIP function (see page 13).
SWAP To swap the main picture with the PIP picture (see
page 13).
PIP+/PIP- To change programmes within the PIP function (see
page 13).
ZOOM To change the size of the PIP picture (see page 13).
FREEZE To freeze the main picture (see pages 9 and 13).
SLEEP To access directly the Sleep timer option in the
Time menu (see page 14).
LIGHT Remote control light.
PRESETS (red button) preset settings menu.
LIST (green button) list of channels (see page 9).
INFO (yellow button) status information (see page 8).
GUIDE (blue button) programme guide (see page 21).
TEXT (purple button) Teletext (see page 20).
The coloured buttons can also be used for operating Teletext.
To select menu options.
To set functions, change values, enable and disable
functions (checkbox) in menus.
To select the picture format or zoom.
OK To confirm a selection, enable and disable functions
(checkbox) in menus.
To freeze the picture (see page 9).
MENU To access the OVERVIEW menu.
EXIT To exit the menu structure.
+/- To control the volume.
MUTE To switch the sound off and back on again.
RETURN To return to the previous channel/AV programme.
PR+/PR- To change channels.
0-9 To select a channel by its number. In the case of channel
numbers with two digits:
- press the tens digit for a few seconds to display it on the
screen, then press the units digit or
- press 0/-- to display “--”, then enter the channel number.
To enter numeric values in menus.
In PC mode, the buttons 1-9 can be used to return to TV
mode and change channels.
AV To select an appliance connected to an AV socket.
DEMO (Disabled).
Using the remote control for other
equipment
This remote control can be used to control other appliances using
the programmable buttons VCR, DVD, SAT, AMP and AUX.
For each button you can control the following appliances:
VCR: video recorder
DVD: DVD player
SAT: satellite receiver, cable network
AMP: hi-fi system, Home Cinema amplifier
AUX: decoder for terrestrial digital TV set and any other
appliance. For instance, if you have two video recorders, you can
program the VCR button to control one video recorder, and
program the AUX button to control the other one.
Note: The TV button is not programmable.
Programming the remote control
Automatic code search
This method can be used to automatically find the most
appropriate code for your appliance.
1. Switch on the appliance you wish to use the remote control
with.
2. Press the relevant button for this appliance on the remote
control, and while holding this button down, press the
standby button until the appliance buttons of the remote
control come on. Release both buttons.
3. Point the remote control at the appliance and press PLAY. If
the appliance has not gone into standby mode, press the
PLAY button again to continue the search for the next set of
codes. Repeat this operation until the appliance goes into
standby mode.There are around 20 sets of codes.
4. When the appliance goes into standby mode, switch it on again
without using the remote control. Press the REV button as
many times as is required to return the appliance to standby
mode.
5. Press the STOP button and hold it down until the appliance
buttons of the remote control go off.
Note:You can cancel the programming operation at any time by
pressing the EXIT button.
4
IFC230_EN
3/01/06
11:19
Page 5
Getting started
Manual programming
Programming the volume control function
This method involves carrying out a manual search for the codes
to be used for controlling your other appliances.
If you have programmed the TV remote control to use with other
appliances and these are connected to an amplifier you can also
programme the remote control to adjust the volume when you
are using one of these appliances.The example below describes
the procedure for programming a DVD player.
1. Switch on the appliance you wish to use the remote control
with.
2. Press the relevant button for this appliance on the remote
1. Programme the AMP button on the remote control to use
control, and while holding this button down, enter one of the
codes relevant to your make of appliance (there is a list of
codes at the end of this manual). If the appliance buttons of the
remote control flash you have entered the wrong code or it is
not possible to program the remote control.
with the amplifier (refer to page 4).
2. Move the remote control away from the appliances. Press the
- button and while holding it down, press the relevant
mode button (DVD, in this example), then the AMP button.
Release the
- button.
3. Point the remote control at the appliance and press the
3. Switch on the amplifier, then the DVD player.
4. Set the remote control to DVD, play a disc and adjust the
relevant button (VCR, DVD, etc). Press the
standby
button. If the appliance does not go into standby mode, try
another code.
volume using the
Depending on the year of manufacture and the type of appliance,
some functions may not be available. Certain codes may cover
more functions than others.Test the functions you can control and,
if appropriate, try other codes. Note here the code(s) which work
best.
VCR
AUX
DVD
AMP
+/- buttons.
Repeat this operation for the other appliances.
To cancel the programmed function for any of the appliances, press
- button, while holding it down and enter the code 000
the
using the numeric buttons.
SAT
When you change the remote control’s batteries, remember
to reprogram it.
MENU
OK
EXIT
0-9
PR+/PRAV
REV
PLAY
FWD
STOP
PAUSE
REC
MUTE
Video recorder
Press the VCR button.
On/Standby
To display the main menu
Vertical scrolling in menus
Horizontal scrolling in menus
To confirm an action
To close a menu
To directly access channels
or enter numeric values
To change channels
To select AV input
Rewind
Play
Fast forward
Stop
Pause picture
Record
DVD player
Press the DVD button.
On/Standby
To display the main menu
Vertical scrolling in menus
Horizontal scrolling in menus
To confirm an action
To close a menu
To enter numeric values
or select options in menus
To change chapters
To select AV input
Rewind
Play
Fast forward
Stop
Pause picture
Satellite receiver
Press the SAT button.
On/Standby
To display the main menu
Vertical scrolling in menus
Horizontal scrolling in menus
To confirm an action
To close a menu
To directly access channels
or enter numeric values
To change channels
Hi-fi system
Press the AMP button.
On/Standby
To select a station using
its number
To change stations
To switch the sound off and
back on again
To set the volume level
+/-
Important:
If the batteries in your remote control are run down you can use the
buttons on the front of your TV set. In TV mode, they have the same
functions as the corresponding buttons on the remote control. In the
menus they have the following functions:
PR œ
PR ƒ
VOL ‹
VOL ¦
MENU
5
or OK
or OK
To confirm a selection
EN
IFC230_EN
3/01/06
11:19
Page 6
Channel set-up
Initial set-up
Initial set-up involves selecting all the settings required to be able to search for and store all
the channels you can receive. Make sure that the television is switched on and follow all the
steps in turn specified hereafter.
The first time you switch the television on, the language selection menu appears.
1
EN
‹
1. Select your language using the
buttons and confirm by pressing OK.When
you select a language, it is applied to the menus immediately.
Eλληνικα
Magyar
Polski
Русский
Suomi
Português
Norsk
Svenska
Dansk
âe‰tina
English
Français
Deutsch
Italiano
Español
Nederlands
2. A list of countries appears. Select the relevant country using the
buttons.
Press OK to confirm.
Note: This is the country you are in, or the country whose channels you want to receive if you live
near its borders.
3. The Automatic installation menu appears.The Automatic search option is
selected. Start the automatic set-up by pressing OK.The message Running appears
next to the Automatic search option and the Progress and Channels found
options appear, informing you of the installation procedure’s progress.
2
Notes:
- The automatic set-up process can take up to 10 minutes. To prevent the channel set-up
process from being interrupted, wait for the message indicating that the set-up is complete
before closing the menu.
- The automatic set-up process deletes all the channels previously stored.
Country
‹
Return
UK
Germany
Italy
Belgium
Austria
Sweden
Switzerland
Other
Russia
Poland
Cz. Republic
Hungary
Luxembourg
Australia
New Zealand
France
Spain
Portugal
Netherlands
Denmark
Finland
Norway
4. Channels are arranged in a pre-set order.
- To modify this order, name and rename channels or delete channels stored twice,
press OK and go to step 5.
To select your country, use the
direction keys and press OK.
- If you do not want to reorganise the channels, press EXIT to close the menu.
5. The Organiser menu allows you to change the order of the channels as arranged
during the automatic set-up process, to name or rename channels, as well as delete
channels stored twice or with poor reception quality.You can also define certain
channels as your favourite channels so that you can access them more quickly by
pressing the PR+/PR- buttons. Simply follow the instructions at the bottom of the
screen. Use a TV programme magazine to identify the channels.
3
Automatic installation
Return
Automatic search
Automatic update
Progress
Channels found
‹ Running
...
•
Organising channels: Select the Select channel option. Using the PR+/PR-,
or
numeric buttons, display the number of the channel to be moved. Select the Swap
with channel option. Using the
or numeric buttons, enter the number you
want to assign this channel to. Press OK.
•
Changing a channel name: Select the Select channel option. Using the PR+/PR-,
or numeric buttons, display the number of the channel whose name you want to
change. Select the Channel name option and choose a name from the list using the
buttons. If none of the names available is suitable select ------.The cursor appears
at the first dash. Use the
buttons to select a character from the list made up of
the letters in the standard alphabet, the numbers 0 to 9 and certain punctuation
symbols. Use the
buttons to go to another character. A name can only have a
maximum of six characters. Press OK to confirm.
•
or
Deleting a channel: Select the Select channel option. Using the PR+/PR-,
numeric buttons, display the number of the channel to be deleted. Select the Delete
channel option and press OK.
•
Defining a favourite channel: Select the Select channel option. Using the PR+/PRor numeric buttons, display the number of the channel you want to define as a
favourite. Select the Favourite channel option and check the box by pressing OK.
You can define up to six favourite channels.
05
Auto installing in progress. Please wait.
To cancel, press EXIT.
5
Organiser
Return
Select channel
Swap with channel
Channel name
Delete channel
Favourite channel
‹ 02
__
BBC2
02
Enter the number of the channel
you want to move, delete or set as
favourite.
01 BBC1
02 BBC2
03 ITV1
04 Channel 4
05 Channel 5
06 Sky One
07 Film Four
08 Sky Sports
09 MTV
10 Discovery
When you have finished press EXIT to close the menu.
To access the Organiser menu another time, press the MENU button to display the
OVERVIEW menu, select Installation and press OK.Then select Organiser from
the Installation menu.
6
IFC230_EN
3/01/06
11:19
Page 7
Channel set-up
Manual channel set-up
Manual Installation
Return
Standard
Reception
Channel search
Fine tuning
Store on number
Channel name
Decoder
Teletext char. set
Teletext adjustment
‹ I...
Aerial...
CH 10
01
BBC1
1...
Choose you standard, then select reception.
Follow the procedure given on this page if you find that some channels have not been
stored during the initial set-up.This can happen if you are setting up cable network
channels. Setting up channels manually requires every setting for a particular channel to be
entered, one at a time.
Display the OVERVIEW menu by pressing the MENU button. Select the Installation
option and press OK to confirm. Select the Manual installation option from the
Installation menu and press OK to confirm.
1. Select the Standard option. Use the
buttons to select the standard for your
country.
Note: The following standards are available to choose from: I for the UK and Ireland, France
for France and Luxembourg, DKK’ for Eastern Europe, the Middle East and Asia, EURO
BG for Western Europe, Australia for Australia, and New Zealand for New Zealand.
2. Select the Reception option. Select the reception method for the channels (aerial or
cable network) using the
buttons.
3. Select the Channel search option. Enter the number of the reception channel or
use the
buttons to find the channels.When a channel has been found the picture
is displayed.
4. If the picture is not clear you can adjust the setting.You do this by selecting the Fine
tuning option and adjusting it with the
buttons.
5. Select the Channel name option and choose a name from the list using the
buttons. If none of the names available is suitable select CH _ _ _ _. Use the
buttons to select a character from the list made up of the letters in the standard
alphabet, the numbers 0 to 9 and certain punctuation symbols. Use the
buttons to
go to another character. Press OK to confirm.
6. If the channel is encoded and you want to connect a decoder to the AV1 socket, select
the Decoder option and check the box by pressing OK.
7. Then select the Teletext char. set option and choose the character set that will be
used for Teletext on this channel using the
buttons.The following character sets
are available:
1:Western Europe, Greek
4: Arabic
2: Eastern Europe
5: Ukrainian
3: Russian, Belarussian
8. To improve Teletext reception, select the Teletext adjustment option and adjust using
the
buttons.
9. Then select the Store on number option and enter the number to be assigned to
this channel using the numeric buttons (for instance, for BBC1 type 01). Press OK.
Important: Whenever you change a value in the Manual Installation menu, the Store
on number option starts flashing. To confirm your change you need to select the Store on
number option and press OK. If you do not confirm the change it will be cancelled when you
change channels or put the TV set in standby.
Repeat this procedure to find other channels.
Notes:
- For cable networks, to search for missing channels, select Other instead of a country, then
select Automatic update in the Automatic installation menu.
- If you wish to go through the whole initial set-up process, put the TV in standby mode, then hold
down the VOL ¦ button on the television and the MENU button on the remote control
until the menu displays. Proceed as for the initial set-up.
- Subsequent set-ups:
- The Automatic update function allows you to set up channels just launched or any
channels that are missing or wrongly set up.
- The Automatic search function is used for setting up channels after the initial set-up
(e.g. after moving house). This process deletes all channels previously stored.
7
EN
IFC230_EN
3/01/06
11:19
Page 8
General operation
Switching the TV set on and off
Accessing AV programmes
To switch the TV set on:
Press the AV button to display the last selected audio-visual
programme and scan through the other audio-visual programmes.
- press the
button on the side of the TV set, the
or OK on the remote control to switch the television on at
the last channel or AV programme you were watching,
AV selection loop: AV1, AV2, AV3, CMP (= component,YPrPb or
YCrCb),VGA, HDMI.
- press the TV or PR+/PR- buttons to switch the television
on at the last channel you were watching,
EN
Volume
- press any numeric button to switch the television on at the
corresponding channel,
Volume control: use the ¦ VOL ‹ buttons on the side of the
TV set or press the
+/- buttons on the remote control to
increase or decrease the volume.
- press the AV button to switch the television on at the last
AV programme you were watching.
Sound mute: press the
button to temporarily mute the
sound. Press this button again or the
+ button to restore
it.
To put the TV set into standby mode, press the
button on the side of the TV set or the
button on the
remote control.The TV set remains powered up, but with low
energy consumption.
+/- buttons on the
Headphone volume control: press the
remote control to display the volume control bar.Then use the
buttons to switch to the headphone volume control bar.
Use the
+/- buttons to adjust the volume.
To switch off the TV set, unplug the mains socket from the
mains outlet.
Accessing channels
Displaying status information
Using the numeric buttons:
In TV mode you can press the INFO (yellow) button on the
remote control to display the number and name of the
relevant channel, the time and date, the type of sound and
format or zoom. If the sleep or turn-off timer is set the time
remaining until the TV set is switched into stand by is
displayed.
for channels 1 to 9, press the corresponding numeric button;
for channels 10 to 99,
- press the tens digit for a few seconds to display it on the
screen, then press the units digit. For instance, for
programme 24, press and hold 2 to display 2-, then press
4; or
In PC mode you can press the INFO (yellow) button on the
remote control to display the time and date, the type of
format, as well as the source of the signal being received and
the resolution. If the sleep or turn-off timer is set the time
remaining until the TV set is switched into stand by is
displayed.
- press the 0/-- button to display “--”, then enter the two
digits.
Using the PR+/PR- buttons: scroll through the channels. AV
programmes are not included in the cycle unless you use the
buttons on the side of the TV set.
When you switch the TV set on, change channels or exit Teletext,
the channel’s number and name are displayed.
Using the list of programmes: refer to page 9.
To access the channel or AV programme previously being watched,
press the RETURN button.
Note: If you activate the Channel number function in the
Preferences menu, the channel number will be displayed
permanently (see page 17).
Accessing your favourite channels
You can define the channels you watch most often as your
favourite channels.This will allow you to create your own list of
channels which you can access more quickly using the PR+/PRbuttons on the remote control.
1. Follow the procedure described in point 5 on page 6 for
defining a channel as your favourite channel.
2. Press the PRESETS (red) button on the remote control.
3. Select the PR+/PR- keys option. Use the
buttons to
select Favourites.
When you change channels using the PR+/PR- buttons on the
remote control only your favourite channels will be available.
To cancel this option, select All channels under the PR+/PR-
keys option.
Note: The PRœƒ buttons on the TV set allow you to access all
the channels set up, even if the Favourites option is selected
8
IFC230_EN
3/01/06
11:19
Page 9
General operation
Zoom
In TV mode, you have the option of changing the display format and using the zoom
function via the
buttons.The available formats and zoom functions are:
4/3 format - picture in centred 4:3 format
14/9 zoom - picture in centred letterbox 14:9 format
16/9 zoom - picture in centred letterbox 16:9 format
16/9 zoom up - picture in 16:9 format with subtitles.
Cinerama - picture in widescreen 4:3 format
16/9 format - picture in widescreen 16:9 format
In 14/9 zoom, 16/9 zoom, and 16/9 zoom up modes, you can temporarily shift the
picture up and down using the
buttons.
In PC mode, only 4/3 format and 16/9 format are available.
Plasma TV sets: Do not use for lengthy periods of time formats which do not fill the entire screen
in order to avoid screen burnout.
List of channels
List
FAV
FAV
01
02
03
04
05
06
07
08
09
TV
BBC1
BBC2
ITV1
Channel 4
Channel 5
Sky One
Film Four
Sky Sports
MTV
To tune to the channel selected: OK
To display previous/next page: ¦‹
Press the LIST (green) button on the remote control to display the list of channels. It
contains a maximum of 11 pages and shows the name and number of every channel.The
last page lists units connected to the AV sockets.
The list appears on the page featuring the channel or AV programme which you are
currently watching.The channel or AV programme you are watching is indicated by a
symbol. Any channels and AV programmes which are locked are indicated by a closed
padlock and those temporarily unlocked are indicated by an open padlock. Favourite
channels are indicated by the letters FAV next to them.
Note: For more information on locking channels, refer to the Parental control section.
To watch one of the channels on the displayed page, select it using the
buttons and
press OK, or use the PR+/PR- buttons.You can also enter the last digit of the channel
number (for example, 5 for 25).The selected channel is shown.
You can scroll through the pages using the
buttons.
Press EXIT to close the menu.
Freezing a picture
Press the OK or FREEZE button to freeze the picture. Press any button on the remote
control or TV set to cancel this function. In PIP mode, press the FREEZE button to freeze
the picture of the main programme.
Plasma TV sets: Do not leave the frozen picture on screen for a lengthy period of time in order to
avoid screen burnout.
Flat batteries
When the batteries are flat a message appears on the screen when you press a button on
the remote control.
You should change the batteries and reprogram the remote control (see page 4).
Product information
Press the MENU button to open the OVERVIEW menu. Select the Contact us!
option and press OK to confirm.The relevant screen appears.This will give you the
Thomson Europe website address and the telephone number for the Helpline, if there is
one (see page 2), as well as your TV set’s serial number.
Press EXIT to close the menu.
9
EN
IFC230_EN
3/01/06
11:19
Page 10
Advanced functions
Adjusting the sound
Display the OVERVIEW menu by pressing the MENU button. Select the Sound
option and press OK to confirm.The Sound menu appears with the following options:
Sound
Return
Tone control
Sound type
Sound mode
SRS Dialog Clarity
Balance
SRS TruBass
Auto Volume Level
Sound effect
Internal speakers
Headphone
EN
...
Stereo...
Normal...
Maximum...
‹ Off
...
1
Broadcast
Mono
Stereo
Dual
NICAM - 3
Analog AV
Sound types
Automatic - Mono
Mono - Stereo
Sound 1 - Sound 2
Sound 1 - Sound 2 - Sound 3
Stereo - Sound 1 - Sound 2
Tone control: this option gives you access to the Tone control menu (more details
below).
Sound type: select a sound type from the list using the
buttons.
The default sound type is Automatic for mono sources, Stereo for stereo sources and
Stereo for AV sources.
Note: The options offered depend on the programme you’re watching. Refer to the table 1
opposite.
Sound mode: use the
buttons to choose a mode from the list. SRS
TruSurroundXT is the default mode.
Notes:
- The options available depend on the sound type selected. Refer to the table 2 opposite.
- SRS TruSurroundXT mode reproduces virtually on two channels only the sound from a
multi-channel source and enhances the rendition of dialogue and bass.
- SRS TruSurround mode reproduces virtually on two channels only the sound from a
multi-channel source.
- SRS WOW mode can be used to obtain optimum bass reproduction
SRS Dialog Clarity: this function boosts the central channel to make dialogue easier to
understand.You can use the
2
Sound modes
Sound type
Normal - Wide - SRS
Automatic
TruSurroundXT
Mono - Sound 1
Sound 2 - Sound 3 SRS TruSurround - SRS WOW
Normal - Stereo wide
Stereo
TruSurroundXT
SRS TruSurround - SRS WOW
buttons to adjust it.
Note: This option only appears if you have selected SRS TruSurroundXT under the
Sound mode option.
Balance: use the
buttons to balance the sound between the left and right speakers.
SRS TruBass: this function is used to strengthen the bass. Select an option from the list
using the
buttons.
Auto Volume Level: check the box by pressing the OK button, if you want to keep the
same sound level for all channels.
Sound effect: this function allows you to create sound effects. Select an option from the
list using the
buttons.
Internal speakers: uncheck this box by pressing OK if you want to stop the sound
coming from the internal speakers and connect external speakers to the TV set.
If you unplug these external speakers, remember to check the box to reactivate the TV
set’s internal speakers (otherwise you will not get any sound).
Headphone: this option allows access to the headphone setting menu (see further
below).
Press EXIT to close the menu. Select Return and press OK to return to the
OVERVIEW menu.
Tone control
Select the Tone control option from the Sound menu and press OK to display the
menu.The content of this menu depends on the options you have selected under Sound
mode and Sound effect in the Sound menu.
Tone control
Return
Sound preset
Frequency range
Film...
‹ 12 kHz...
If you have not selected any effect under Sound effect, the menu which is displayed
allows you to select a predefined setting and choose your own settings using the graphic
equaliser. It offers the following options:
Sound preset: use the
buttons to select the appropriate setting for the
programme you are watching.
The Personal setting stores your graphic equaliser settings.
Note: The Sound preset option is not available if you have selected a sound effect under the
Sound effect option.
You can access the list of preset sound settings directly by pressing the PRESETS button
(red) on the remote control, selecting the Sound preset option and choosing one of the
preset settings from the list.Your selection is applied to all channels and AV programmes.
Press EXIT or PRESETS to close the menu.
10
IFC230_EN
3/01/06
11:19
Page 11
Advanced functions
Frequency range: the graphic equaliser has seven frequency bands. Select each band in
turn using the
buttons and make the necessary adjustments using the
Press OK to confirm.
buttons.
Note: When you are setting the graphical equaliser, Personal appears under the Sound
preset option and your settings are stored as your new personal settings.
In every other instance, the menu displayed offers the following options:
Tone control
Bass, Treble: you can adjust these settings to the level you want using the
Return
Bass
Treble
buttons.
‹
Press EXIT to close the menu.To return to the Sound menu, select Return and press
OK to confirm.
Headphone settings
Select the Headphone option from the Sound menu and press OK to display the
menu.The following options are available:
Headphone settings
Return
Headphone volume
Headphone bass
Headphone treble
Headphone sound
Headphone volume, Headphone bass, and Headphone treble: you can adjust
these settings to the level you want using the
buttons.
‹
Stereo...
Headphone sound: select a sound type from the list using the
buttons.
The default sound type is Automatic for mono sources, Stereo for stereo sources and
Stereo for AV sources.
Press EXIT to close the menu.To return to the Sound menu, select Return and press
OK to confirm.
TruSurroundXT, SRS and
symbol are trademarks of SRS Labs, Inc.
TruSurroundXT technology is incorporated under license from SRS Labs, Inc.
Adjusting the picture
Picture
Return
Picture preset
Brightness
Colour
Contrast
Black expand
Tone
Sharpness
Noise reduction
Other settings
Personal...
‹
Medium...
Neutral
Low...
...
The menus for adjusting the picture are used to obtain the best picture setting according to
your preference, the type of programme you are watching and the ambient lighting.When
you make an adjustment only the selected option remains displayed, allowing you to see the
changes taking place on screen.The entire menu is displayed again when you select another
option or the time for making an adjustment has elapsed.
Display the OVERVIEW menu using the MENU button. Select the Picture option and
press OK to confirm.The Picture menu appears with the following options:
Picture preset: use the
buttons to select the appropriate setting for the
programme you are watching.
Personal contains the values you have defined for the settings Brightness, Colour,
Contrast, Black expand, Tone, Sharpness and Noise reduction.
TV mode
You can access the list of preset picture settings directly by pressing the PRESETS button
(red) on the remote control, selecting the Picture preset option and choosing one of
the preset settings from the list.Your selection is applied to all channels.You must, however,
select a preset setting for each AV programme. Press EXIT or PRESETS to close the
menu.
Note: This function is only available in TV mode.
Brightness, Colour, Contrast, Tone, Sharpness: adjust these settings as required
using the
buttons.
Black expand: can be used to adjust the picture according to the ambient brightness.
Select an option from the list using the
buttons.
Noise reduction: improves the quality of the picture in the case of poor reception.
Select an option from the list using the
buttons.
Other settings: this option provides access to the Other settings menu (see further
below).
Press EXIT to close the menu.To return to the OVERVIEW menu, select Return and
press OK to confirm.
11
EN
IFC230_EN
3/01/06
11:19
Page 12
Advanced functions
In PC mode you can access a number of specific functions:
Picture
Return
Brightness
Colour
Contrast
Tone
Auto-adjustment
Phase
Clock
Vertical position
Horizontal position
‹
Neutral
...
Auto-adjustment: this option allows you to automatically adjust the following functions:
Phase, Clock, Vertical position and Horizontal position. Press OK until the
message Running appears. Once the setting is implemented the message Done appears.
Phase, Clock: adjust these settings as required using the
buttons in order to
enhance picture quality.
Vertical position: use the
Horizontal position: use the
buttons to move the picture vertically on the screen.
buttons to move the picture horizontally on the
screen.
EN
Other settings
PC mode
Note: This menu is only available for TV channels and AV programmes.
Other settings
Return
Photo Mode
Film mode
NTSC tint
Automatic format
On...
‹
Select the Other settings option from the Picture menu and press OK.The Other
settings menu appears with the following options:
Photo Mode: improves quality and stability of still pictures.When this function is
enabled still pictures are detected automatically and their resolution enhanced. Check the
box by pressing OK to enable this function.
Note: This function is only available for certain audio-visual sources.
Film mode: detects that the programme being broadcast is a film and enhances picture
quality. Select an option from the list using the
buttons.
Notes:
- The Advanced option is selected by default.
- This function is only available for certain audio-visual sources.
NTSC tint: is used to adjust the picture’s tint. Adjust these settings as required using the
buttons.
Note: This function is only available for NTSC audio-visual sources.
Automatic format: automatically applies the appropriate format to the picture. Check
the box by pressing OK to enable this function.
Note: This function is only available for certain audio-visual sources.
Press EXIT to close the menu.To return to the Picture menu, select Return and press
OK to confirm.
12
IFC230_EN
3/01/06
11:19
Page 13
Advanced functions
PIP - PAP
This function can be used to display a second source (TV, AV, etc.) in a corner of the screen
or on the right side of the screen. It is available in both TV and PC mode.
PIP
Return
Dual Mode
Channel
Zoom
Position
‹ PIP
04 BBC4...
Off
Upper right
Note: If this function is not available for the source displayed on the screen a message will inform
you of this.
Press the MENU button to display the OVERVIEW menu. In PC mode, select PIP and
press OK.The PIP menu offers the following options:
Dual mode: use the
buttons to select ann option from the list:
- Off: function is disabled, full screen in TV or PC mode.
- PIP: a channel or AV programme is displayed in a frame in a corner of the screen.
- PAP: the screen is divided vertically in two and the PIP is displayed on the right side.
The other menu options may or may not still be accessible, depending on the option you
have selected:
-
In PIP mode, you can select the programme, the zoom and the position of the frame
on the screen. Select an option from the list each time using the
buttons.
-
In PAP mode, you can select the programme to be displayed in the frame. Select an
option from the list each time using the
buttons.
Press EXIT to close the menu. Select the option Return and press OK to return to the
OVERVIEW menu.
Operation
Use the PIP button on the remote control to enable the different display modes in turn. In
TV mode, the sound always comes from the main programme. In PC mode, the sound
always comes from the VGA or HDMI AV source.
In both display modes:
- Press the FREEZE button to freeze the picture of the main programme.
- To apply the PIP function to an AV programme in RGB, you need to select RGB as
the relevant AV source in the AV Settings menu (see page 17).
- If the channel or AV programme that you want to apply the PIP function to is locked
the pictures will not be displayed. Change channel or press OK.Then follow the
instructions on the screen.
In PIP mode:
- Use the SWAP button to swap the channels around.
- Use the PIP ZOOM button to change the size of the PIP picture.
- Use the
buttons to change the position of the PIP frame on the screen.
- Use the PIP+/PIP- buttons to change channels on the right side of the screen.
- In TV mode, press OK to display the PIP picture on the full screen.
In PAP mode:
- Use the SWAP button or
buttons to swap screens.
- Use the PIP+/PIP- buttons to change channels on the right side of the screen.
- Use the TEXT button (purple) to display on the right side of the screen Teletext on
the channel displayed on the left. Press EXIT to disable this function.
Press EXIT to quit PIP mode and return to full screen in TV or PC mode.
13
EN
IFC230_EN
3/01/06
11:19
Page 14
Advanced functions
Setting the time
The Time menu allows you to set the time and date on your TV set, to programme an
automatic turn-off or wake-up timer and to view the calendar.
Display the OVERVIEW menu by pressing the MENU button. Select the Time option
and press OK to confirm.
Time
EN
Return
Sleep timer
Time reference
Time
Date
Calendar
Wake up timer
Wake up time
Wake up channel
Turn off timer
Turn off time
‹ Off
04 BBC4
12:34
01/06/05
...
Once
07:00
10 CNN
Once
12:00
Setting the time and date
1. Select the Time reference option.
2. Select a channel which displays Teletext so that the time and date from this can be used
as a reference, by using the
buttons or entering a channel number using the
numeric buttons on the remote control.The time and date appear in a couple of
seconds if they are available on the channel that has been selected.
3. If the time and date are not supplied by Teletext they will not appear under the Time
and Date options.You will then have to enter them manually.
Select the Time option and enter the time using the numeric buttons or the
buttons.The setting -- appears under the Time reference option.
Select the Date option and enter the date using the numeric buttons in the format:
DD/MM/YY.
Notes:
- In the event of the power supply being cut off (the TV set is unplugged or there is an electrical
fault), the time and date will be lost, if they have been entered manually.You need to enter
them again. In this instance, we advise you to consult a channel which has this information and
to check that it is correct.
- If the time has not been set, when you select the Time option from the OVERVIEW, a
message appears prompting you to set the time.
Using the calendar
This menu allows you to look for a particular date.
Calendar
1. Select the Calendar option and press OK to confirm.The Calendar screen
Return
Month
Year
Today
Mon
appears.
‹ September
2005
...
Tue
Wed
2. Under Month select the month you want from the list using the
buttons.
3. Under Year select the year you want from the list using the
buttons.
Thu
Fri
Sat
1
2
3
Sun
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
The calendar displays the selected month.
To display the calendar for the current month, select the Today option and press OK to
confirm.The current day is automatically selected if the date is available.
Programming a turn-off timer
You can programme the TV set’s turn-off timer by setting a period of time after which or a
specific time when the TV set goes into standby mode.
To set a period of time after which the TV set goes into standby mode:
1. Select the Sleep timer option.
2. Using the
buttons, set the period after which the TV set automatically goes into
standby mode (4 hours maximum, at 5-minute intervals).To disable this function, select
Off.
Note:You can access this function directly by pressing the SLEEP button on your remote
control.
To select a time for the TV set to go into standby:
1. Select the Turn off timer option.
2. Using the
buttons, choose Once or Daily from the list. Select Off to disable
this function.
3. Select the Turn off time option. Using the numeric buttons or
buttons, enter
the time at which you want the TV set to go into standby mode.
When one of these functions (Sleep timer or Turn off timer) is on, a message appears one
minute before the television set goes into standby mode. Press any button on the remote
control to cancel standby mode.
Press EXIT to close the menu.To return to the previous menu, select Return and press
OK to confirm.
14
IFC230_EN
3/01/06
11:19
Page 15
Advanced functions
Programming the wake-up timer
This function can be used to set the time for the set to come on, for instance, for the
television to wake you up.
1. Select the Wake-up timer option. Using the numeric buttons or
buttons,
choose Once or Daily from the list to activate this function and access the relevant
options. Select Off to disable this function.
2. Under the Wake-up time option enter the wake-up time using the numeric or
buttons.
3. Under the Wake-up channel option enter the number of the channel you want to
wake you using the
or numeric buttons.You can also select an AV programme
using the AV button. In this case, make sure you programme the equipment connected
to the AV socket to come on as well.
4. Press EXIT to close the menu. A message appears to say that the wake-up timer has
been programmed. Press any button on the remote control to make the message
disappear.
5. To enable the function, press the
button on the remote control to put the TV set
into standby mode.
The TV set will automatically come on at the programmed time if you do not interrupt it
by using the remote control. Once the TV set is on:
- you can use all its functions as normal;
- you can put the TV into standby mode. In this case, the Wake-up timer function is
disabled for the relevant day;
- if the channel or AV programme selected from the menu is locked you need to enter your
code to access it.
Parental control
The parental control functions allow you to restrict your children’s access to the television.
This means that you can lock the set’s buttons and prevent access to certain channels
and/or AV programmes.You can also lock the Time menu to prevent any of the automatic
turn-off and wake-up timers you have programmed for your set from being modified.You
can also prevent access to the Installation menu to prevent any channels from being set
up without your consent. All these functions are protected by a PIN code.
Display the OVERVIEW menu by pressing the MENU button. Select the Parental
control option and press OK to confirm. Follow the instructions on screen for displaying
the menu.
Defining a PIN code
To be able to use the functions in the Parental control menu, you need to first of all
define a 4-digit PIN code as follows:
PIN code
Return
PIN code
Enter PIN code.
‹ ...
1. Select the PIN code option from the Parental control menu. Enter your code
using the numeric buttons.The numbers are replaced by asterisks on screen.
2. Type your code in again to confirm it.
Note: Choose a code that you can easily remember.
You can now use the various parental control functions.
Note: Once a parental control function is enabled, you need to enter your PIN code to access the
Parental control menu.
To amend your PIN code, select the PIN code option. Enter your new code using the
numeric buttons.Type your code in again to confirm it.
15
EN
IFC230_EN
3/01/06
11:19
Page 16
Advanced functions
Locking a channel or AV programme
1. Select the Select channel option from the Parental control menu. Use the
Parental control
Return
Select channel
Lock channel
Lock front panel
Lock TIME
Lock INSTALLATION
PIN code
EN
01 BBC1
‹ ____
or numeric buttons to select the channel to be locked. Use the
press the AV button to access the AV programmes.
buttons or
2. Check the box under the Lock channel option by pressing OK.
Note: This function is only available if a code has been defined.
To unlock the channel or AV programme, go to the Parental control menu by entering
your code, select the Lock channel option and uncheck the box by pressing OK. Press
EXIT to close the menu.
Define a PIN code by using the digit keys.
Locking the buttons on the TV set
Select the Lock front panel option from the Parental control menu and check the
box by pressing OK.
Notes:
- This function is only available if a code has been defined.
- The remote control is needed to be able to use the television.
To cancel the lock, go to the Parental control menu by entering your code, select the
Lock front panel option and uncheck the box by pressing OK. Press EXIT to close
the menu.
Locking the Time menu
Select the Lock TIME option from the Parental control menu and check the box by
pressing OK.
Notes:
- This function is only available if a code has been defined.
- When this function is active you need to enter your PIN code to be able to access the Time
menu.
To cancel the lock function, enter your PIN code to access the Parental control menu,
select the Lock TIME option and uncheck the box by pressing OK. Press EXIT to close
the menu.
Locking the Installation menu
Select the Lock INSTALLATION option from the Parental control menu and
check the box by pressing OK.
Notes:
- This function is only available if a code has been defined.
- When this function is active you need to enter your PIN code to be able to access the
Installation menu.
To cancel the lock function, enter your PIN code to access the Parental control menu,
select the Lock INSTALLATION option and uncheck the box by pressing OK. Press
EXIT to close the menu.
Operation (TV mode)
-
To watch a channel or AV programme which is locked, try accessing it and follow the
procedure on the screen.The lock will be applied again when you put the television in
standby.
In the list of programmes, channels and/or AV programmes which are temporarily
unlocked are indicated by an open padlock.
-
If you have forgotten your PIN code you can cancel it:
Put your TV set into standby mode, then press the VOL ¦ button on the TV set and
the EXIT button on the remote control simultaneously for five seconds.This
procedure is possible, even if you have locked the buttons on the TV set.
16
IFC230_EN
3/01/06
11:19
Page 17
Advanced functions
Customising your television
Preferences
You can set preferences for some features.These preferences remain in force as long as you
do not change them.
Preferences
Return
Channel number
Language
Maximum TV volume
Programme info pages
Power Savings Mode
Burn in protection
‹ English...
...
Select your language using the ¦‹ keys.
Display the OVERVIEW menu by pressing the MENU button. Select the Installation
option and confirm by pressing OK. Select the Preferences option from the
Installation menu and press OK to confirm.The Preferences menu offers the
following options:
Channel number: check this box using the OK button to permanently display the
number of the channel being watched.
Important: on plasma TV sets, due to the risk of screen burnout, we recommend that
you disable this function.
Language: select from the list the language the menus will be displayed in using the
buttons.
Note: When you select a language, it is applied to the menus immediately.
Maximum TV volume: set the maximum volume level using the
buttons.To hear
the level that you have just set, press the OK button and hold it for a few seconds.
Programme info pages: if you have changed the reference page for the TV
programmes in Teletext you can restore the factory-set reference pages. Press OK until the
message Running appears. Once the setting is implemented the message Done appears.
Power Savings Mode: when this function is active the TV set automatically goes into
standby mode after five minutes if it does not receive any signal on the selected channel or
AV programme.To enable this function, check the box by pressing OK.
Burn in protection (plasma TV sets only): when this function is on, it moves the picture
on screen without the user noticing it in order to prevent screen burnout.
Note: This function is enabled by default.
Press EXIT to close the menu. Select the option Return and press OK to return to the
Installation menu.
Configuring AV sockets
You can configure your TV set according to the equipment you connect to it.
AV settings
Return
AV1 name
AV1 video input
AV2 name
AV2 video input
AV3 name
AV3 video input
CMP name
VGA name
HDMI name
‹ DECOD.
RGB...
VCR1
S-Video...
CAMCOR
Video...
CMP _ _ _
VGA _ _ _
HDMI _ _
Select the name of the device connected
to AV1.
Display the OVERVIEW menu by pressing the MENU button. Select the Installation
option and press OK to confirm.The Installation menu appears. Select the AV
settings option and press OK to confirm. Follow the messages on screen and the
instructions below explaining how to configure the AV sockets.
AV1 name: use the
buttons to select from the list the name of the equipment
connected to this socket. If the factory preset names do not suit you, select AV1_ _ _ and
enter another one, following the screen messages.
AV1 video input: use the
buttons to select from the list the type of video signal
transmitted by the equipment connected to the AV1 socket.
Note: Select RGB if no picture is displayed when you connect a games console.
Repeat the same procedure to configure the AV2 socket.
AV3 name: use the
buttons to select from the list the name of the device
connected to the AV3 sockets. If none of the devices in the list is appropriate, select
AV3 _ _ _ and enter the name of the device following the instructions on the screen.
AV3 video input: use the
buttons to select from the list the type of video signal
transmitted by the equipment connected to the AV3 sockets.If the equipment is connected
to the AV3 scart socket, select Video or S-Video. If it is connected to the AV3 cinch
sockets, select Video (cinch) or S-Video (cinch).
17
EN
IFC230_EN
3/01/06
11:19
Page 18
Advanced functions
CMP name: use the
buttons to select from the list the name of the device
connected to this socket. If none of the devices in the list is appropriate, select
CMP _ _ _ and enter another one, following the instructions on the screen.
VGA name: use the
buttons to select from the list the name of the device
connected to this socket. If none of the devices in the list is appropriate, select
VGA _ _ _ and enter the name of the device following the instructions on the screen.
HDMI name: use the
buttons to select from the list the name of the device
connected to this socket. If none of the devices in the list is appropriate, select HDMI _ _
and enter the name of the device following the instructions on the screen.
EN
Press EXIT to close the menu. Select the option Return and press OK to return to the
Installation menu.
Playing files from memory cards
Insert a card in the relevant connector or plug the USB card reader into the relevant
socket on the side of the TV set.
Important: Make sure and insert the card in the connector facing the right way.
If the reader does not read the card, display the OVERVIEW menu by pressing the
MENU button. Select the Memory card option and press OK to confirm. Select the
Memory Card option from the main menu and press OK to confirm.
1. Select from the list the option relevant for the file format that you want to play using
the
buttons: Music (mp3,WMA), Pictures (JPEG), or Video Clips (MPEG,
DivX). Press OK to confirm.The relevant screen is displayed.The list of folders/files
appears on the left of the screen.
2. Use the
buttons to select a folder/file and press OK to confirm.Then press the
button to access the play modes on the right of the screen.
3. Use the
buttons to select the relevant play mode and press OK to confirm.The
following play modes are available:
mp3
Standard Play
Music
‹ PLAY
Current folder
Current file
Artist
Title
Album
Rock 1
Rock 2
mp3 file 1
mp3 file 2
mp3 file 3
mp3 file 4
Standard Play
- Folder: the device plays all the subfolders and files in this folder in the order they
were recorded on the card;
- File: the device starts playing from this file.
Play All
The device plays all the files in all the folders in the order they were recorded on the
card.
Random All
The device plays all the files in all the folders randomly.
JPEG
NORMAL
‹ PLAY
18
File name
18/124
Random Folder
- Folder: the device plays the files in the selected folder randomly.
- File: the device plays this file, then the other files in the selected folder randomly.
Repeat Folder/File
The device plays the selected folder or file again.
MPEG and DivX
00:12
‹ PLAY
18
File name
18/124
While playing, the screen displays information which varies according to the type of file (see
opposite).
While playing, you can still access the sound and picture setting functions. Press the
PRESETS button (red) on the remote control. In the menu that is displayed:
- Select the Sound preset or Picture preset option and choose one of the preset
settings from the list using the
buttons.
- Select the Sound or Picture option.The relevant menu appears.
- Select the Zoom option, then select a picture format from the list using the
buttons.
18
IFC230_EN
3/01/06
11:19
Page 19
Advanced functions
Other functions
The main menu offers other functions, which are described below. Select an option and
press OK.
Lock
This function can be used to control access to files that can be read by this reader. Press
OK to display the relevant menu.
Lock Player.This is used to lock the reader.
Select Lock Player from the Lock menu using the
buttons and press OK to
confirm. Enter a 4-digit code in the screen that appears using the numeric buttons on
the remote control, then press OK to confirm. Enter your code again to confirm it,
then press OK.
Note: Choose a code that is easy for you to remember or make a note of it.
When the reader is locked, you need to enter the code to access the options in the
Lock menu.
Unlock Player.This is used to unlock the reader.
buttons and press OK to confirm.
Select Lock from the main menu using the
Enter your code in the screen that appears using the numeric buttons, then press OK
to confirm.The Lock menu appears. Select Unlock Player and press OK to
confirm.The reader is unlocked.
Change Password.This is used to change your password.
Select Change Password from the Lock menu using the
buttons and press
OK to confirm. Enter a new 4-digit code and press OK to confirm. Enter your new
code again to confirm it, then press OK.
Ratings Limits. Select Ratings Limits from the Lock menu using the
buttons and press OK to confirm.You can then define the conditions for accessing
unrated titles (which don't contain any parental control information).
Press OK. Select Free Access if you don't want to set any limits, or Password
Required if you want to allow the files to be read only after a password has been
entered.
These limits are only enabled if you have locked the reader.
System Test. If requested by your reseller, you can select the System Test option
to access certain information.
Display
This can be used to enable the On-Screen Displays function. Press OK.The OnScreen Displays option appears. Press OK. Enable or disable the function by pressing
OK.
Sound
This can be used to enable the Sound Logic function.You can use this function to
control the different sound levels via dynamic compression. It improves the quality of the
sound track at a low volume and quietens the loudest sounds. Press OK.The Sound
Logic option appears. Enable or disable the function by pressing OK.
Languages
This can be used to select the language which the menus for the memory card reader are
displayed in. Press OK.The Player Menus option appears. Press OK. Select a language
from the list using the
buttons and press OK to confirm.
19
EN
IFC230_EN
3/01/06
11:19
Page 20
Advanced functions
Teletext
Other Teletext functions
The Teletext service is available in many countries under a variety
of names (TOP Text, Fastext, FLOF text,Videotext). It is provided
as a free service by television broadcasters.This service provides a
real wealth of information, available at any time, on weather, sports
results, news, games, etc.The information is presented in pages or
organised in topics specified in colour on the screen and you can
access this information by simply pressing the buttons of the
relevant colour on the remote control.
When a newsflash is detected, the
icon is replaced with a N
in the navigator. Select it and press OK to display the newsflash. In
the case of an update, the Teletext function is enabled and displays
the new information.
Accessing Teletext
Some channels provide subtitles for some of their programmes.
The number of the relevant pages is specified on the Teletext
index page.
Newsflash
Subtitles
EN
Press the TEXT button (purple) on the remote control.Teletext
will display the last page selected, or if you have changed channel,
the index page (usually 100). If the particular programme does not
provide a Teletext service, a message will appear to this effect.
To display subtitles, enable the Teletext function, find the number of
the page displaying the subtitles and enter it. Once the relevant
page is found, the subtitles appear in the TV picture.The navigator
disappears after a couple of seconds.To display it again, press the
TEXT button (purple).
To display a page, enter its 3-digit number or use the PR+/PRbuttons.The page appears after a few moments.The entered
number appears:
- red if the page does not exist,
- white if the page has been found,
- green when a sub-page has also been found for this page,
- yellow when the page exists but has not been found yet.
Alarm page
In some countries (Spain, Benelux, etc.), you can set a time to
display certain Teletext pages (alarm pages).
To do this, display the relevant alarm page and enter subpage
mode. Enter the time instead of the subpage number (e.g. 1705 for
17:05) and press EXIT.The page will disappear and will appear
again at the set time, as long as you do not change channels or
switch off the TV beforehand.
If the current page includes subpages, the page number is displayed
in green. In this mode, pressing the
buttons will allow you to
step through all the available subpages.
You can select a specific subpage number by pressing 0 to enter
subpage direct access mode.The display will look like this: 120 ----.
You can then enter the four digits of the sub-page number using
the numeric buttons (e.g. 0003).
Direct access
The yellow and blue buttons on the remote control allow you to
access directly those pages whose numbers are displayed in yellow
and blue at the bottom of the screen.
Navigator
In the navigator use the
following functions:
Fastext (FLOF)
buttons to select one of the
There is a band displayed at the bottom of the screen in Fastext
teletext, which is divided into coloured sections, which represent
links to the topics which you can access by pressing the button of
the relevant colour. Other topics accessible in the same way can
also be displayed.
Stop
Some information is spread over several subpages which will be
displayed one after the other.To stop subpage scrolling, select
STOP and press OK. Press OK to allow the information to move
again.
If you select STOP and the symbol changes colour, this means that
there are no subpages.
TOPtext
To reveal a hidden answer (for example, in games), select
and
press OK. Press OK once more to hide the answer again.
TOPtext displays a bar at the bottom of the page divided into two
coloured sections (yellow and blue).The blue section displays a
topic you can access directly by pressing the blue button.The next
topic will then appear in the blue section.The yellow section
displays an article you can access directly by pressing the yellow
button.The next article will then appear in the yellow section.
Zoom
Storing the programme page
Select
and press OK: once to zoom in on the top part of the
screen, twice to zoom in on the bottom part of the screen and
three times to return to normal display.
If the broadcasting company amends the pages of its Teletext you
need to save the new programme page to be able to access the
programme guide (see page 21).
Hidden answers
To do this, go to the programme page for the current day and
select the
function in the navigator. Press the OK button until
the message “Store for programme info: OK. Reset: 0”
appears at the bottom of the screen. Press OK.Press EXIT to
quit Teletext, and access the programme guide again.
Mixed display
Select
and press the OK button to display Teletext in the
right half of the screen. Use the TEXT button to toggle between
full screen and mixed display modes.
Press the EXIT button to quit Teletext.
20
IFC230_EN
3/01/06
11:19
Page 21
Advanced functions
Program Info (programme guide)
Program Info
01 BBC1
Thu 13/10/05
06:00
06:00 Breakfast
09:15 Mirror, Signal, Manoeuvre
10:00 City Hospital
11:00 Homes Under the Hammer
11:30 Bargain Hunt
01:00 BBC News
01:28 BBC London News
01:40 Neighbours
02:15 Doctors
02:35 Diagnosis Murder
Events
...
/
): OK.
To set a memo/wake up timer (
Events
...
To display previous/next page: ¦‹.
The programme guide is only available for channels which have been stored.The
information it contains has been compiled by your television based on Teletext information
transmitted by the various channels, according to the services they offer. lt can be used to
find out what programmes are on and to store those which you want to be reminded of
when they are about to start.
Accessing the programme guide
- press the GUIDE (blue) button on the remote control, or
- display the OVERVIEW menu using the MENU button, then select Program
Info and press OK to confirm
Important:The guide’s availability and context depend entirely on the Teletext transmitted
by each broadcaster.
- If the guide is not available on the channel you are watching, a message will inform you of
this.
- If the date is not set correctly on the television you are prompted to select a reference
channel. Select a channel offering Teletext using the
buttons or enter the number of
the channel using the numeric buttons (see the "Setting the time and date" section on
page 14).Then press OK.
The Program Info screen appears with a list of ten programmes.The first one is the
programme currently being shown. If you select the Events option the Events screen
appears, providing a summary of the programmes selected for the TV to come on
automatically or for sending a reminder when the programme is starting. Use the
buttons to go to the previous or following page of programmes.
Storing programmes
1. Select from the list the programme you want to store, using the
buttons.
2. Press OK twice if you want to be reminded when the programme is starting while you
are watching another programme, or three times if you want to programme the TV set
to come on automatically when this programme starts.
The programmes in the list which have a reminder set for them are indicated by the
symbol .Those stored for the TV set to come on automatically when they start are
indicated by the symbol .
Notes:
- You can select up to four programmes.
- If four programmes have already been selected the ! sign appears in front of the programme
option you want to store.You then need to delete a programme to be able to store or record
another one. Refer to the section "Checking your selections on the Events screen".
21
EN
IFC230_EN
3/01/06
11:19
Page 22
Advanced functions
Checking your selections on the Events screen
Events
Return
06:00 - 09:15
10:00 - 11:00
Breakfast
01BBC1
City Hospital
01BBC1
11:30 - 12:15
Bargain Hunt
01BBC1
02:05 - 02:35
Doctors
01BBC1
EN
This screen displays the list of programmes stored.To display it, select the Events option
from the Program Info menu and press OK to confirm.The four programmes that are
stored are indicated by the same symbols as feature in the Program Info screen.
- If you want to delete a programme, select it from the list using the
press OK.
buttons, then
- As soon as a programme has been broadcast, it is automatically removed from this list.
Select Return to return to the Program Info screen and press OK to confirm. Press
EXIT to quit the Program Info screen.
Operation (TV mode)
To delete an event, press OK.
Programme stored for a reminder to be sent:
If you are watching another channel a message appears to tell you that the programme
you stored is starting. It appears in a frame in the top right of the screen. Press any
button on your remote control to make the message disappear. If you want to watch
the stored programme, press OK. Press EXIT if you want to make the message
disappear without switching to the channel showing the stored programme.
Note: This function can only be enabled if the TV is on.
Programme stored for the TV to come on automatically:
The TV comes on automatically at the time the programme starts and on the channel
that is showing it. A message appears stating the name of the programme, the time it
starts and the channel it is being shown on.
Note: This function can only be enabled if the TV is in standby.
22
IFC230_EN
3/01/06
11:19
Page 23
Other information
Sockets
AV1 and AV2 SCART sockets (input-output) at the back
These sockets can be used to connect a range of equipment, including video recorders,
camcorders (VHS, S-VHS, 8 mm or Hi 8 format), decoders, satellite receivers, DVD players,
games consoles or devices producing an RGB signal.
AV3 SCART socket (input) at the back
This socket can be used to connect equipment, such as video recorders or camcorders
(VHS, S-VHS, 8 mm or Hi 8 format).
AV3 cinch audio + video sockets (input) on the side
These can be mainly used to connect camcorders (VHS or 8 mm format).
AV3 cinch audio + S sockets (input) on the side
These can be mainly used to connect camcorders (S-VHS or Hi 8 format).
CMP component sockets (Y Pb/Cb Pr/Cr) + cinch audio
sockets (input) at the back
These can be used to connect a DVD player.The component sockets automatically detect
the type of component signal received: interlaced component (YPrPb) or progressive
component (YCrCb).
VGA socket (15 pin) + audio socket (input) at the back
These can be used to connect a computer.
stereo
jack
HDMI socket (or DVI socket + cinch audio sockets) (input) at
the back
This can be used to connect a PC with a compatible video card installed, certain DVD
players or a high-definition compatible digital satellite decoder.This socket allows a very
high transmission quality for the video and audio signals.To connect a device with a DVI
socket, you can use the HDMI socket and the cinch audio sockets. In this instance, the
HDMI socket is used for receiving the video signal and the cinch sockets for receiving the
audio signal. An HDMI-DVI cable is required.
HDMI
R
audio (DVI)
Notes:
- Do not connect a device supplying analogue RGB signals to this socket.
- The HDMI socket is compatible with HDCP format.
L
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing LLC.
To display images using the equipment connected, press the AV button on the remote
control: once to select AV1, twice to select AV2, etc. For some equipment (connected to
the SCART sockets), this selection is done automatically.
Cinch audio sockets (output) at the back
video
L
R
monitor
OUT
These can be used to connect a stereo amplifier, a hi-fi system or amplified speakers (see
further below).
Cinch audio + video sockets (output) at the back
These can be used to connect a Home Cinema amplifier.
23
EN
IFC230_EN
3/01/06
11:19
Page 24
Other information
USB socket (input) at the side
EN
This can be used to connect a memory card reader for cards containing mp3,WMA, JPEG,
MPEG, and/or DivX files.The following USB 1.1 and USB 2.0 Mass Storage Class devices are
recognised as compatible:
- flash memory card readers
- USB flash memory sticks
- mp3 players with flash memory
- mp3 players with hard disc, with their own power supply
- most digital cameras
- some mobile telephones
- hard disc drives with their own power supply, supporting FAT12 and FAT16 file systems.
The FAT8, FAT12 and FAT16 file systems are supported. NTFS systems are not supported.
Memory card sockets (input) on the side
These can be used to connect memory cards.
The following formats are supported: SM, SD, MMC, MS, MS Pro, XD, CF and MD.
Connecting active speakers or an amplifier
The audio cinch sockets on the side of the set can be used to connect active speakers
(with a built-in amplifier) or an amplifier.
Connect the left speaker to the cinch L socket and the right speaker to the cinch R socket.
To connect an amplifier, you should connect the cinch left L and right R sockets to the
amplifier’s L and R inputs.
Connecting headphones
Use the relevant socket on the side of the TV set to connect headphones or stereo
earphones. Refer to page 11 on how to adjust the headphone volume.
Connecting a video recorder
You are recommended to connect a video recorder via the SCART socket to obtain
optimum picture and sound quality. However, you can also connect a video recorder to the
TV set only using the aerial socket.
If you select the latter option, switch the video recorder on and play a tape.Then use the
Automatic update option from the Automatic installation menu to search for
the appropriate channel for the video recorder (refer to the relevant section).You should
assign channel 99 to it to ensure enhanced picture quality when tapes are being played and
in pause mode.
24
IFC230-wallmount
3/01/06
15:30
Page 1
FR
1
Démontage du support de table en vue de la fixation d’un support mural
(disponible en option).
Retournez le téléviseur (écran vers le sol) et posez-le sur une surface plane et
protégée.
1. Dévissez les deux vis pointeau sur 2 à 3 tours maximum, à l’aide de la clé
fournie.
2. Dégagez le support de table du téléviseur en effectuant les mouvements
illustrés.
3. Mettez en place et vissez les deux enjoliveurs qui se trouvent dans le sachet de
documentation à l’aide des vis également fournies.
Vous pouvez maintenant installer le support mural, en vous reportant aux
instructions qui l’accompagnent. Le tableau en bas de page indique pour chaque
taille d’appareil le type de support mural VESA à commander.
DE
Abbau des Tischfußes für die Montage einer Wandhalterung (als Option erhältlich).
2
Drehen Sie das Fernsehgerät mit dem Bildschirm nach unten und legen Sie es auf
eine völlig flache und sichere Grundlage.
1. Lösen Sie die beiden Stellschrauben mit 2 bis maximal 3 Umdrehungen mithilfe
des mitgelieferten Schlüssels.
2. Entfernen Sie den Tischfuß des Fernsehers, indem Sie die zwei dargestellten
Bewegungen ausführen.
3. Montieren und verschrauben Sie die beiden Zierblenden, die Sie in der
Plastikhülle zusammen mit den mitgelieferten Schrauben finden
Sie können nun die Wandhalterung anbringen. Befolgen Sie dabei bitte die
mitgelieferte Anleitung. In der untenstehenden Tabelle finden Sie für jede
Gerätgröße den zu bestellenden VESA-Wandhalterungstyp.
IT
Smontaggio del supporto da tavolo per il fissaggio di un supporto a muro
(disponibile su richiesta).
Girate il televisore (con lo schermo rivolto a terra) e posatelo su una superficie
piana e protetta.
3
1. Con la chiave in dotazione, svitate le due spine filettate di 2 - 3 giri al massimo.
2. Staccate il supporto da tavolo dal televisore effettuando i movimenti mostrati
nella fotografia.
3. Posizionate e avvitate i due coperchietti che si trovano nella busta della
documentazione con le apposite viti in dotazione.
Adesso è possibile installare il supporto a muro, facendo riferimento alle relative
istruzioni. La tabella in fondo alla pagina indica, per ogni dimensione di apparecchio,
il tipo di supporto a muro VESA da ordinare.
EN
Detaching the table stand to attach the TV set to a wall mount (available
separately).
Turn the TV set over (with the screen facing the floor) and place it on a flat,
protected surface.
1. Remove the two screws (2-3 turns maximum) using the key supplied.
2. Detach the table stand from the TV set using the movements shown.
3. Fit under the appliance the two covers supplied in the documentation bag using
the screws supplied.
You can now attach the wall mount, referring to the instructions supplied with it.
The table at the bottom of the page contains the type of VESA wall mount to be
ordered for each size of TV set.
LCD 32”
LCD 37” + 42”
LCD 46”
Plasma 50”
600x400
600x200
800x400
IFC230-wallmount
3/01/06
15:30
Page 2
ES
1
Desmontaje del soporte de mesa para la fijación de un soporte mural (disponible
opcionalmente).
Gire el televisor (pantalla hacia el suelo) y colóquelo sobre una superficie lisa y
protegida.
1. Desatornille los dos tornillos de punta de 2 ó 3 vueltas como máximo, con
ayuda de la llave proporcionada.
2. Despeje el soporte de mesa del televisor efectuando los movimientos indicados
en las ilustraciones.
3. Colóquelo y atornille los dos embellecedores que se encuentran en la bolsa de
la documentación con la ayuda de los tornillos que también se proporcionan.
Ahora puede instalar el soporte mural, siguiendo las instrucciones que acompañan
al mismo. La tabla de la parte inferior de la página indica el tipo de soporte mural
VESA que debe solicitar con relación a los diferentes tamaños de aparato.
PT
Desmontagem do suporte de mesa para a fixação de um suporte de parede
(disponível em opção).
2
Vire o televisor (ecrã voltado para o chão) e coloque-o sobre uma superfície plana
e protegida.
1. Desenrosque, 2 a 3 voltas no máximo, os dois parafusos de imobilização, com a
ajuda da chave fornecida.
2. Separe o suporte de mesa do televisor, efectuando os movimentos ilustrados.
3. Posicione e aparafuse as duas tampas que se encontram no saco com a
documentação, com a ajuda dos parafusos também fornecidos.
Pode agora instalar o suporte de parede, de acordo com as instruções que o
acompanham. O quadro no final da página indica, para cada tamanho de aparelho, o
tipo de suporte de parede VESA a encomendar.
NL
Demontage van het tafelstatief voordat u de een muurbevestiging plaatst (apart
verkrijgbaar).
Draai het televisietoestel om (scherm naar beneden) en plaats deze op een vlakke
en beschermde ondergrond.
3
1. Schroef de beide ventielschroeven maximaal 2 tot 3 draaien los met de
meegeleverde sleutel.
2. Verwijder het tafelstatief van het televisietoestel door middel van de in de
afbeelding aangegeven bewegingen.
3. Breng op zijn plaats en schroef de beide sierdoppen uit het documentatiezakje
vast met de eveneens meegeleverde schroeven.
U kunt nu de muurbevestiging monteren waarbij u de bijgevoegde aanwijzingen
volgt. De tabel onder aan de pagina geeft voor elk toestelformaat het type VESAmuurstatief aan dat u moet bestellen.
SV
Nedmontering av bordsstativet inför montering av väggstativ (finns som tillbehör).
Lägg ner TV:n (med skärmen mot marken) på ett plant och skyddat underlag.
1. Lossa de två spetsiga skruvarna med max 2-3 varv med den medföljande
nyckeln.
2. Lossa bordsstativet genom att föra TV:n i den riktning som visas på bilderna.
3. Sätt TV:n på plats och fixera de två skyddshattarna som levererades med
dokumentationen med hjälp av de medföljande skruvarna.
Du kan du montera väggstativet genom att följa de anvisningar som levererades
med det.Tabellen längst ner på sidan visar för varje storlek på apparat vilket VESAstöd som ska beställas.
LCD 32”
LCD 37” + 42”
LCD 46”
Plasma 50”
600x400
600x200
800x400
IFC130-L-Codes
22/07/05
17:17
Page 1
Codes
VCR
AIWA
AKAI
AKURA
ALBA
2053, 2061, 2062, 2065, 2072, 2074, 2089, 2094, 2095
2021, 2022, 2033, 2034, 2049, 2050, 2054, 2068, 2074, 2090, 2095
2074, 2081
2009, 2026, 2042, 2048, 2051, 2054, 2059, 2060, 2062
2065, 2068, 2081, 2087, 2090, 2092, 2093, 2094, 2095
AMBASSADOR
2009, 2068
AMSTRAD
2048, 2057, 2058, 2065, 2081, 2087
ANITECH
2026, 2081
ANSONIC
2066
ASA
2012, 2028, 2072
AUDIOSONIC
2087
AUDIOTON
2068
BAIRD
2031, 2065, 2074, 2082, 2087
BLAUPUNKT
2002, 2004, 2008, 2035, 2039, 2044
2045, 2067, 2071, 2083, 2085
BRANDT
2037, 2055, 2074, 2091, 2098
BUSH
2026, 2042, 2048, 2051, 2059, 2060, 2062, 2065
2081, 2087, 2088, 2090, 2092, 2093, 2094, 2095
CARREFOUR
2077
CASIO
2065
CATHAY
2087
CGE
2065, 2074
CIMLINE
2026, 2081
CLATRONIC
2009, 2068, 2081
CONDOR
2009, 2068, 2087
CROWN
2009, 2026, 2048, 2068, 2081, 2087
CYRUS
2028
DAEWOO
2009, 2048, 2068, 2077, 2087, 2095
DANSAI
2026, 2081, 2087
DAYTRON
2087
DECCA
2028, 2065, 2074, 2080
DENON
2015
DUAL
2065, 2074, 2087
DUMONT
2028, 2031, 2032, 2065, 2082
ELBE
2013, 2073, 2087
ELCATECH
2026, 2081
ELIN
2086
ELTA
2081, 2087
EMERSON
2077, 2081
ESC
2047, 2048, 2068, 2086, 2087
EUROPHON
2068
FERGUSON
2029, 2055, 2065, 2074, 2091, 2098
FIDELITY
2065, 2081
FINLANDIA
2028, 2031, 2065, 2075, 2079, 2082
FINLUX
2015, 2028, 2031, 2032, 2065, 2075, 2082
FIRSTLINE
2012, 2016, 2017, 2026, 2042, 2072
2075, 2076, 2077, 2081, 2088, 2094
FISHER
2018, 2019, 2023, 2031, 2068, 2073, 2078, 2082
FRONTECH
2009, 2068
FUJITSU
2065
FUNAI
2065
GBC
2068
GEC
2028
GENEXXA
2082
GOLDHAND
2026, 2081
GOLDSTAR
2012, 2043, 2065, 2072
GOODMANS
2009, 2012, 2024, 2026, 2048, 2065, 2068
2072, 2081, 2086, 2087, 2088, 2094
GRAETZ
2031, 2047, 2074, 2082, 2086
GRANADA
2018, 2028, 2031, 2065, 2067, 2072, 2075, 2079, 2082, 2086
GRANDIN
2012, 2026, 2065, 2068, 2072, 2081, 2087
GRUNDIG
2002, 2004, 2005, 2008, 2026, 2028, 2039
2041, 2044, 2051, 2067, 2085, 2091
HANSEATIC
2012, 2072, 2087
HARWOOD
2081
HCM
2026, 2051, 2081
HINARI
2003, 2026, 2047, 2051, 2062, 2066, 2074, 2081, 2087, 2088, 2095
HISAWA
HITACHI
2095
2003, 2015, 2032, 2036, 2046, 2047
2065, 2066, 2074, 2075, 2082, 2086
IMPERIAL
2065, 2086
INGERSOL
2003, 2066, 2086
INNO HIT
2068, 2081, 2086, 2087
INTERBUY
2072, 2081
INTERFUNK
2028, 2082
INTERVISION
2065, 2072, 2087, 2094
IRRADIO
2072, 2081
ITT
2009, 2012, 2018, 2031, 2033, 2047, 2048, 2063, 2074, 2082, 2086
ITV
2068, 2072, 2087
JVC
2006, 2025, 2029, 2040, 2041, 2063, 2074, 2080
KAISUI
2026, 2081
KENDO
2033, 2042, 2061, 2072, 2081, 2090, 2094
KENWOOD
2074
KNEISSEL
2094, 2095
KUBA
2078
LENCO
2048
LG
2065, 2072
LOEWE
2003, 2004, 2012, 2028, 2035
LOEWE OPTA
2066, 2067, 2072, 2083, 2097
LOGIK
2003, 2047, 2066, 2081, 2086
LUMATRON
2087
LUXOR
2016, 2018, 2020, 2024, 2031, 2033
2076, 2078, 2079, 2081, 2082
M ELECTRONIC
2013, 2065, 2072
MARANTZ
2002, 2004, 2024, 2028, 2067, 2073
MATSUI
2003, 2011, 2030, 2038, 2042, 2061, 2062
2065, 2066, 2072, 2086, 2094, 2095
MEDION
2094
M-ELECTRONIC
2065, 2072, 2073
MEMOREX
2012, 2018, 2031, 2065, 2072, 2078, 2079, 2082
METZ
2002, 2004, 2012, 2035, 2039, 2045, 2067, 2083, 2085, 2097
MIGROS
2065
MINERVA
2004, 2008, 2039, 2085
MITSUBISHI
2016, 2025, 2027, 2028, 2076, 2080
MULTITECH
2026, 2065, 2068, 2081, 2082
MURPHY
2065
NATIONAL
2083
NEC
2013, 2014, 2025, 2073, 2074, 2080
NECKERMANN
2028, 2067, 2074
NESCO
2026, 2065, 2081, 2095
NIKKAI
2068, 2081, 2087
NOKIA
2018, 2031, 2033, 2047, 2074, 2075, 2079, 2082, 2086, 2087, 2090
NORDMENDE
2052, 2055, 2063, 2074, 2084, 2091, 2099
OCEANIC
2065, 2074, 2079, 2082
OKANO
2054, 2061, 2081, 2087, 2090, 2094
ORION
2003, 2011, 2030, 2042, 2059, 2060, 2061
2062, 2066, 2092, 2093, 2094, 2095
ORSON
2065
OSAKI
2012, 2026, 2065, 2072, 2081
OSUME
2088
OTAKE
2092, 2093
OTTO VERSAND
2028
PALLADIUM
2004, 2012, 2026, 2066, 2067, 2072, 2074, 2081, 2086, 2090
PANASONIC
2035, 2044, 2045, 2083, 2097
PATHE CINEMA
2011, 2066, 2076
PATHE MARCONI
2074
PENTAX
2015, 2032
PERDIO
2065
PHILCO
2013, 2073, 2081
PHILIPS
2028, 2063, 2067
PHONOLA
2028
PIONEER
2025, 2028, 2046, 2075, 2080
PORTLAND
2009, 2068, 2087
PRINZ
2065
IFC130-L-Codes
22/07/05
17:17
Page 2
Codes
DVD
PROFEX
PROFI-TRONIC
PROLINE
PYE
QUELLE
RADIOLA
REX
RFT
ROADSTAR
SABA
SAISHO
SALORA
SAMSUNG
SANSUI
SANWA
SANYO
SBR
SCHAUB LORENZ
SCHNEIDER
SEG
SEI
SEI-SINUDYNE
SELECO
SENTRA
SHARP
SHINTOM
SHIVAKI
SHORAI
SIEMENS
SINGER
SINUDYNE
SOLAVOX
SONITRON
SONOKO
SONOLOR
SONTEC
SONY
STARLITE
STERN
SUNKAI
SUNSTAR
SUNTRONIC
SUPRA
SYMPHONIC
TANDBERG
TASHIKO
TATUNG
TEAC
TEC
TECHNICS
TELEAVIA
TELEFUNKEN
TELETECH
TENSAI
THOMSON
THORN
TOSHIBA
TOWADA
UHER
ULTRAVOX
UNITECH
UNIVERSUM
YOKO
2056
2086
2051, 2065, 2088
2028
2028, 2067
2028
2063, 2074
2068, 2081
2012, 2026, 2047, 2048, 2072, 2081, 2086, 2087
2040, 2041, 2052, 2055, 2063, 2074, 2091
2003, 2011, 2030, 2038, 2042, 2066, 2094
2016, 2018, 2033, 2076, 2082
2047, 2064, 2086, 2096
2025
2066
2018, 2031, 2078, 2079, 2082
2028
2031, 2065, 2074, 2082
2026, 2028, 2065, 2072, 2081, 2086, 2087
2047, 2056, 2081, 2086, 2087
2003, 2028
2066
2068, 2072, 2074
2009, 2068, 2081, 2088
2020, 2024, 2079
2026, 2031, 2081, 2082
2072
2003, 2066
2002, 2004, 2008, 2012, 2023, 2028
2031, 2039, 2067, 2072, 2082, 2085
2017
2003, 2028, 2066
2009
2078
2087
2018, 2024, 2079
2012, 2072
2007, 2010, 2069, 2070, 2071
2072, 2082
2087
2061, 2094
2065
2065
2072, 2086
2065, 2081
2087
2065, 2072, 2079, 2086
2028, 2065, 2074, 2076, 2079
2065, 2074, 2087
2009, 2068, 2081, 2087
2035, 2044
2074
2037, 2055, 2063, 2074, 2091, 2098, 2100
2081, 2087
2056, 2065, 2066, 2072, 2081
2000, 2001, 2063, 2074, 2091, 2098, 2099
2011, 2029, 2031, 2072, 2074, 2082
2016, 2017, 2028, 2063, 2074, 2076, 2077
2056, 2081
2047, 2072, 2086
2021, 2087
2086
2004, 2008, 2012, 2021, 2028, 2033, 2039, 2047
2057, 2065, 2067, 2072, 2085, 2086, 2094
2009, 2047, 2068, 2072, 2081, 2086
AKAI
DENON
JVC
KENWOOD
MAGNAVOX
MICROMEGA
MITSUBISHI
ONKYO
OPTIMUS
PANASONIC
PHILIPS
PIONEER
SAMSUNG
SONY
TECHNICS
THOMSON
TOSHIBA
XBOX
YAMAHA
ZENITH
3006
3002, 3009
3016
3002, 3005, 3014
3010
3021
3011
3010
3020
3002, 3009
3010, 3018, 3021
3020, 3022
3017
3004, 3013
3009
3000, 3012, 3015, 3019
3003, 3010
3012
3009
3010
Réseau câblé, Kabelnetz, rete via
cavo, cable network, red por cable
ALCATEL
BT CABLE
CABLETIME
FILMNET CABLECRYPT
FRANCE TELECOM
GENERAL INSTRUMENT
GRUNDIG
JERROLD
MACAB
M-NET
NOKIA
PHILIPS
PIONEER
SAGEM
SALORA
SCIENTIFIC ATLANTA
TELE+1
TELEPIU
UNITED CABLE
VIDEOWAY
VISIOPASS
WESTMINISTER CABLE
5025, 5026
5004
5007, 5010, 5014, 5019, 5021, 5023
5022
5024, 5027, 5029
5020
5013
5002, 5008, 5017, 5020
5024
5022
5015
5024, 5028, 5029
5005
5016, 5024
5011
5003, 5009
5012, 5022
5022
5002, 5017
5006, 5018
5024, 5029
5004
IFC130-L-Codes
22/07/05
17:17
Page 3
Codes
Récepteur satellite, Satellitenempfänger,
ricevitore satellite, satellite receiver,
receptor satélite
AB SAT
AKAI
ALBA
ALLSAT
ALLTECH
ALPHA
ALTAI
AMPERE
AMSTRAD
ANKARO
ANTTRON
APOLLO
ARCON
ARMSTRONG
ASA
ASAT
AST
ASTRA
ASTRO
AUDIOTON
BEST
BLAUPUNKT
BRAIN WAVE
BSKYB
BT SATELLITE
BUSH
CAMBRIDGE
CANAL SATELLITE
CHANNEL MASTER
CITYCOM
CLATRONIC
COMTEC
CONDOR
CONRAD
CONTEC
DAEWOO
DANSAT
D-BOX
DNR
DNT
ECHOSTAR
EINHELL
ELSAT
ELTA
EMME ESSE
EUROPA
EUROSKY
EUROSTAR
FERGUSON
FIDELITY
FINLUX
FRACARRO
FREESAT
FTE
FUBA
GALAXIS
GRANDIN
GRUNDIG
G-SAT
HANSEATIC
HINARI
HIRSCHMANN
HISAWA
HUTH
INTERVISION
ITT/NOKIA
JOHANSSON
5079
5091
5032, 5063, 5093
5037, 5043, 5091
5066
5091
5052
5052
5035, 5046, 5052, 5067, 5069, 5073, 5080, 5092
5044, 5047, 5094
5032, 5043, 5063
5032
5071
5091
5053
5091
5048
5033, 5050, 5057
5041, 5063, 5094, 5095
5063
5094
5041
5049, 5071
5080
5072
5037, 5043, 5093
5031, 5068
5088, 5096
5093
5077
5049
5047, 5051
5033, 5094
5033, 5060, 5061, 5094
5051, 5061
5032
5037, 5043
5083
5071
5052, 5091
5052, 5082, 5088, 5096
5032, 5046, 5047
5069
5032, 5091, 5094
5082, 5094
5044, 5061, 5091
5030, 5033, 5094
5033, 5084
5037, 5043, 5064
5046, 5067
5031, 5055, 5060
5032, 5082
5066
5061, 5068, 5094
5032, 5052, 5094
5047, 5051, 5057, 5081, 5094
5038
5035, 5040, 5041, 5074, 5076, 5080, 5092
5043
5062
5032, 5043, 5093
5030, 5041, 5052, 5053, 5054, 5056, 5060
5049
5033, 5044, 5047, 5049, 5050, 5051, 5061
5033, 5065
5053, 5060, 5083
5049
KATHREIN
KOLON
KOSMOS
KR
KREISELMEYER
KYOSTAR
LASAT
LEMON
LENCO
LEXUS
LORENZEN
LUXOR
MANATA
MANHATTAN
MASCOM
MASPRO
MATSUI
MEDIABOX
MEDIASAT
MEDION
METRONIC
METZ
MICRO TECHNOLOGY
MORGAN'S
NEC
NETWORK
NEUHAUS
NEUSAT
NOKIA
NORDMENDE
NOVIS
OCTAGON
ONDIGITAL
ORBITECH
PACE
PALCOM
PALLADIUM
PANASONIC
PANDA
PHILIPS
PHOENIX
PHONOTREND
PIONEER
PREDKI
PREMIERE
PROSAT
QUADRAL
QUELLE
RADIOLA
RADIX
REDPOINT
RFT
ROVER
SABA
SAGEM
SAKURA
SAMSUNG
SATCOM
SATELCO
SATFORD
SATLINE
SATPARTNER
SCHNEIDER
SEDEA ELECTRONIQUE
SEEMANN
SEG
5041, 5056, 5063, 5077, 5086, 5091, 5095
5032
5056
5063, 5066
5041
5032, 5063
5033, 5051, 5068, 5094
5071
5032, 5044, 5057, 5071, 5094
5091
5033, 5044, 5071, 5073
5060, 5083, 5092
5072
5072
5056
5039, 5041, 5066, 5071, 5074
5031, 5041, 5072, 5093
5096
5057, 5088, 5096
5094
5032, 5038, 5047, 5063, 5077
5041
5057
5061, 5068, 5091
5042
5043
5033, 5044, 5057, 5061, 5071
5071
5053, 5060, 5083
5032, 5049, 5064, 5093
5049
5032, 5044, 5051, 5063
5045, 5089, 5090
5032, 5058, 5059, 5061
5035, 5037, 5043, 5045, 5075, 5080
5093
5032
5035, 5080
5033, 5037
5041, 5043, 5044, 5061, 5063, 5072, 5074, 5076
5077, 5086, 5088, 5089, 5090, 5091, 5096
5043, 5051
5047, 5081
5087, 5088, 5096
5032, 5049
5096
5047, 5065, 5093
5047, 5061, 5065, 5072, 5093, 5094
5033, 5046
5091
5052, 5066, 5085
5057
5044, 5047, 5058, 5091
5065
5033, 5043, 5064, 5070, 5071, 5072
5034, 5078
5051
5030, 5032
5033, 5050, 5062
5094
5050
5065
5032, 5049
5076
5032
5057, 5094
5032, 5049, 5062, 5073, 5094
IFC130-L-Codes
22/07/05
17:17
Page 4
Codes
SELECO
SIEMENS
SKARDIN
SKYMASTER
SL
SONY
STRONG
SUNNY SOUND
SUNSTAR
TECHNILAND
TECHNISAT
TELASAT
TELECIEL
TELEFUNKEN
TELEKA
TELESAT
TELETECH
THOMSON
TONNA
TRIAD
TRIASAT
TRIAX
UNIDEN
UNISAT
UNIVERSUM
VARIOSAT
VESTEL
VISIOSAT
VIVA
VORTEC
WELA
WINERSAT
WISI
WORLD
ZAUNKONIG
ZEHNDER
5082
5041, 5068
5057
5047, 5062, 5065, 5084
5071
5031, 5035
5032, 5094
5094
5094
5050
5036, 5058, 5059, 5091
5062
5063
5032, 5072
5052, 5056, 5063, 5071, 5074
5062
5084
5000, 5033, 5064, 5088
5050
5048
5055
5055
5067
5051, 5091
5033, 5041, 5053, 5067, 5073
5041
5073
5070
5044
5030, 5032, 5045
5061
5049
5041, 5048, 5052, 5061, 5070
5049
5071
5048, 5073, 5077, 5094
Systèmes audio,Audiosysteme,
sistemi audio, audio systems,
sistemas audio
AIWA
AKAI
ALBA
ARCAM
AUDIO RESEARCH
AUDIOTON
BRANDT
BUSH
CARVER
CLATRONIC
CONDOR
CYRUS
DENON
DUAL
ECLIPSE
ELTA
FISHER
GENEXXA
GOLDSTAR
4014, 4026, 4028, 4044, 4062, 4064, 4067, 4073, 4086
4025, 4046, 4050
4069, 4079, 4083, 4096
4068
4068
4068
4053
4015, 4096
4021, 4043
4051
4066
4068
4010, 4011, 4017, 4055, 4058
4072
4097
4051
4021, 4043, 4070, 4084
4030
4035, 4094, 4095
GOODMANS
GRUNDIG
HARMAN KARDON
HARWOOD
HCM
HITACHI
INTERSOUND
JVC
KENWOOD
KODAK
LG
LINN
M ELECTRONIC
MARANTZ
MATSUI
MEMOREX
MERIDIAN
MICROMEGA
MITSUBISHI
NAD
NAIM
NIKKO
OKANO
ONKYO
PANASONIC
PHILIPS
PIONEER
QUAD
QUASAR
RADIOTONE
REVOX
ROADSTAR
ROADSTER
ROTEL
SAISHO
SAMSUNG
SANSUI
SANYO
SCHNEIDER
SHARP
SHERWOOD
SIEMENS
SONY
SUPERTECH
TEAC
TECHNICS
TELEFUNKEN
THOMSON
THORENS
THORN
TOSHIBA
UHER
UNIVERSUM
WATSON
YAMAHA
4046, 4050, 4051, 4069, 4095, 4097
4031, 4033, 4035, 4036, 4068
4024, 4031
4051
4097
4080
4051
4022, 4047
4019, 4030, 4034, 4039, 4040, 4056, 4071, 4093, 4098
4078
4035
4068
4094
4031, 4033, 4061, 4065, 4068
4051, 4068, 4079, 4082, 4095
4018
4068
4031, 4068
4046, 4062, 4067
4041, 4054
4068
4069
4046
4027
4012, 4020, 4038, 4049, 4052, 4081, 4085
4031, 4068, 4077, 4078
4008, 4018, 4023, 4030, 4037, 4057, 4088
4068
4020
4096, 4097
4030, 4031, 4068
4087, 4094
4016
4068
4042
4036
4031, 4042, 4050, 4074, 4091, 4097
4021, 4033, 4043, 4070, 4084
4066, 4096
4030, 4060, 4076
4048, 4063, 4072
4050, 4092
4028, 4045, 4054, 4090
4097
4024, 4050, 4069
4012, 4020, 4032, 4038, 4049, 4052, 4075, 4081
4053
4003, 4007
4031, 4068
4051
4089, 4098
4042
4035, 4036, 4046, 4050, 4051, 4068
4096
4009, 4013, 4029, 4030, 4059
IFC230-cov
3/01/06
15:51
Page 3
IFC230-cov
3/01/06
15:51
Page 4
IFC230
TV LCD - PLASMA
Modèle et numéro de série
Modell und Seriennummer
Modello e numero di serie
Model and serial number
Modelo y número de serie
Modelo e número de série
Model en serienummer
Modell och serienummer
THOMSON Sales Europe
46, quai A. Le Gallo
92648 Boulogne Cedex
FRANCE
322 019 464 RCS NANTERRE
http://www.thomson-europe.com
25830600 © Copyright TTE Europe SAS 2006
Adresse du détaillant
Adresse des Fachhändlers
Indirizzo del rivenditore
Dealer's address
Dirección del distribuidor
Morada do negociante
Adres van de verkoper
Återförsäljarens adress
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising