5” (12.7 cm) tft-lcd colour television / monitor with 255

5” (12.7 cm) tft-lcd colour television / monitor with 255
5” (12.7 CM) TFT-LCD COLOUR
TELEVISION / MONITOR WITH
255 MEMORIES AND REMOTE CONTROL
LCD-5014KL/S
Instruction manual
Bedienungsanleitung
Manuel d’instructions
Manuale d’istruzioni
Manual de instrucciones
Manual de instruções
is a registered Trademark of Roadstar S.A. - Switzerland All rights reserved
LCD-5014/S
INDEX
English
Deutsch
Français
Italiano
Español
Português
Page
Seite
Page
Pagina
Página
Pagina
Fi
g
.
F
1
13
25
37
49
61
.
ig
Your new unit was manufactured and assembled
under strict ROADSTAR quality control.
Thank-you for purchasing our product for your music
enjoyment.
Before operating the unit, please read this instruction manual carefully. Keep it also handy for further
future references.
•
•
Votre nouve appareil a été fabriqué et monté en
étant soumis aux nombreaux tests ROADSTAR. Nous
espérons que cet appareil vous donnera entière satisfaction.
Avant de vous adonner à ces activités, veuillez lire
attentivement ce manuel d’instructions. Conservezle
à portée de main à fin de référence ultérieure.
•
•
Vuestro nuevo sistema ha sido construido según las
normas estrictas de control de calidad ROADSTAR.
Le felicitamos y le damos las gracias por su elección
de este aparado. Por favor leer el manual antes de
poner en funcionamiento el equipo y guardar esta
documentación en case de que se necesite
nuevamente.
Il vostro nuovo apparecchio é stato prodotto ed
assemblato sotto lo stretto controllo di qualitá
ROADSTAR.
Vi ringraziamo di aver acquistato un nostro prodotto
per il vostro piacere d’ascolto.
Prima di procedere all'utilizzo dell'apparecchio,
leggete attentamente il manuale d’istruzioni e
tenetelo sempre a portata di mano per futuri
riferimenti.
•
Seu novo aparelho foi construido e montado sob o
estrito controle de qualidade da ROADSTAR.
Agradecemos por ter comprado nosso produto para
a sua diversão.
Antes de usar esta unidade é necessário ler com
atençâo este manual de instruções pare que possa
ser usada apropriadamente; mantenha o manual
ao seu alcance para outras informações.
•
Ihres neues Gerät wurde unter Beachtung der
strengen ROADSTAR-Qualitätsvorschriften gefertigt.
Wir danken Ihnen für den Kauf unseres Produktes
und wünschen Ihnen optimalen Hörgenuss. Bitte
lesen Sie diese Bedienungsanleitung durch, und
heben Sie sie auf, um jederzeit darin nachschlagen
zu können.
REMOTE CONTROL
English
WARNINGS
The exclamation point within the triangle is a warning sign alerting the user of important instructions accompanying the
product.
The lightening flash with arrowhead symbol within the triangle
is a warning sign alerting the user of “dangerous voltage” inside
the unit.
CAUTION
RISK OF ELECTRIC
SHOCK
DO NOT OPEN
To reduce the risk of electric shock, do not remove the cover. No
user serviceable parts inside the unit. Refer all servicing to
qualified personnel.
1
2
English
LCD-5014KL/S
5 inch (12.7 cm) TFT-LCD Colour TV/Monitor with 255 memories and Remote
Control.
FUNCTIONS AND CONTROLS
1. POWER ON/OFF BUTTON
2. JOYSTICK BUTTON (CH+/CH-/V+/V-/MENU)
3. AV/TV SELECTING BUTTON
230v~
This unit operates on 12VDC/230V ~ 50Hz. If the unit is not used
for a long period of time, remove the plug from the AC mains.
This unit must not be exposed to moisture or rain. During heavy
rains with lightnings unplug TV from mains.
The power switch in this unit is mounted on the secondary
circuit and does not disconnect the whole unit from the mains in
OFF position.
Ensure all connections are properly made before operating the
unit.
This unit should be positioned so that it is properly ventilated.
Avoid placing it, for example, close to curtains, on the carpet or in
a built-in installation such as a bookcase.
4. SPEAKER
5. EARPHONE JACK
6. A/V IN JACK
7. A/V OUT JACK
8. COOLING VENTS
9. REMOTE SENSOR
10. TFT-LCD DISPLAY
11. ROD ANTENNA
Do not expose this unit to direct sunlight or heat radiating sources.
12. EXTERNAL BATTERIES INPUT
13. SET STAND
14. SCREW HOLE
15. DC 12V IN
REMOTE CONTROL
1. TV SOUND SYSTEM SELECTING BUTTON
2. MUTE BUTTON
3. RECALL BUTTON (RETURN TO PREVIOUS CHANNEL)
4. SLEEP TIMER BUTTON
5. CHANNEL and NAVIGATION SELECTING BUTTONS
6. CHANNEL DIGIT SELECTING BUTTON
English
3
7 .TV/AV SELECTING BUTTON
8. PICTURE MIRROR BUTTON
4
English
NOT FOLLOWING THIS INSTRUCTION CAN CAUSE THE BATTERIES TO EXPLODE!
DETACH THE BATTERY PACK WHEN USING THE UNIT WITH THE CAR BATTERY CABLE
OR THE POWER ADAPTER 230/12V.
9. CHANNEL -/-- BUTTON (one or two digits)
10. MENU BUTTON
11. VOLUME and NAVIGATION SELECTING BUTTONS
12. POWER ON/OFF BUTTON
Battery Installation:
1. Open the Battery drawer by pulling it out.
2. Insert a CR2025 Lithium battery in the Battery drawer.
3. Close the Battery drawer.
Operation:
Aim the Remote Control to the Remote Sensor (9) on the unit.
Maximum operation Range: 5 m.
Car battery operation
The car cigarette lighter adaptor cable (supplied) is useable with this unit for direct use in
any 12V negative ground vehicle. Simply insert the small plug of the cable into the
matching DC jack (15) on the side of the unit and the other end into the cigarette lighter of
the vehicle. The unit can operate between 11 and 15 V DC.
INSTALLING & OPERATING INSTRUCTION
1. Plug the power cord of the AC/DC adapter (included) one end to the DC 12V IN (15)
on the unit and the other end to the 230V outlet.
2. Press the POWER button on the unit (1) unit or on the remote control (12).
3 Pull out the ROD ANTENNA (11) easily and adjust the angle / heading to the best
position to receive TV signals.
4. To turn Off the unit, press the POWER SWITCH (1).
VOLUME ADJUSTMENT
POWER SUPPLY
Mains operation with PowerAdapter
For use with 230V AC house current, plug the AC/DC cable of the Power Adaptor
(supplied) to the 12V IN jack (15) and the Power Adaptor to a 230V AC wall outlet.
Press the Main Power switch (1) to ON.
Operation with external Battery Pack
1. Open the Battery Pack (supplied) by unscrewing the small black screw and sliding the
battery pack door on the side.
2. Insert 10 pcs UM-3 (AA) rechargeable batteries (Ni-MH recommended).
Make sure the polarity of the batteries are correct. Close the Battery Pack.
3. Slide the Battery Pack from the top to fix it to the rear of the unit.
4. Plug the AC/DC cable of the Power Adapter (supplied) to the 12V IN jack (15) and the
Power Adaptor to a 230V AC wall outlet.
5. The rechargeable batteries will be charged by the built-in charging circuit when the AC
adapter is connected to 230V.
Do not charge longer than 12 hours (normal charge = 6 hours).
ATTENTION: WHEN USING NORMAL (DRY) BATTERIES (NOT-RECHARGEABLE), DO NOT
CONNECT THE CAR BATTERY ADAPTER OR THE AC/DC POWER ADAPTER.
The Volume can be adjusted directly by pressing the VOL- and VOL+ Buttons (2) on the
unit or VOL +/- Buttons on the remote control (11).
MENU OPERATION
1) Picture adjusting function
Press the [MENU] button (2) on the remote control then you will find the picture contents
as follows.
Press [CH+] or [CH-] button to set each item.
Press [V+] or [V-] button to adjust.
PICTURE
BRIGHT
COLOR
CONTRAST
SHARPNESS
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII
35
33
30
22
English
5
2) Adjusting the audio
Press [MENU] two times to adjust the voIume. Hold on [V+] or [V-] button to adjust the volume. The screen displays:
AUDIO
VOLUME
33
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII
Further, you could press [V+] or [V-] (2) on the unit or V+] or [V-] (11) on the remote control
to adjust the volume under the condition of any menu displaying.
3) Function adjustment.
Press [MENU] button three times to adjust the functions. Press [CH+] or [CH-]
button to select the function. Press [V +] or [V-] button to transfer the function
items. The screen displays:
FUNCTION
CALENDAR
GAME
(MIRROR)
(DOWN)
(TETRIS)
NORMAL/MIRROR (for reverse view)
NORMAL/DOWN ( for top-down fixing)
CALENDAR: Press [CH+] or [CH-] button to select the calendar. Press [V+] or [V-]
button to adjust the month and date.
GAME: Press [CH+] or [CH-] button to select the game. Press [V+] or [V-] button to enter
into the game. The game Tetris is available in this unit. The operation methods are as
follows:
Press [V+] button to move right, press [V-] button to move left, press [CH+] to turn up and
down press [CH-] button to accelerate.
PICTURE MIRROR: Press [CH+] or [CH-] button to select the picture. Press [V+] or [V-]
button to turn the picture left to right.
PICTURE UP AND DOWN: Press [CH+] or [CH-] button to select the picture. Press the
[V +] or [V-] button to turn the picture up and down.
4) System adjustment
Press the [MENU] button four times continuously, the system adjustment will be displayed.
Press [CH+] or [CH-] button to select the item. Press [V+] or [V-] button to change the
6
English
functions. The screen displays:
SYSTEM
C.SYS
S.SYS
SWAP
COPY
WEAK SIGNAL
AUTO
BG
O<--->
O<--ON
C.SYS: Press [V+] or [V-) to switch over the color system. The color system which can
switchover are as follow: AUTO, PAL, P 3.58, N 3.58, N 4.43, SECAM, SECAM L.
The unit original color system is AUTO.
S.SYS: Press [V+] or [V-] to switchover the TV sound system. The TV sound system
which can switch over are as follow: BG, DK, I, M
SWAP: Press [CH+] or [CH-) to choose the program swap item. The function allows
you to swap the currently channel number to the channel number you wish. Press [CH+]
or [CH-] to choose target channel (when the channel number changes color to red, it
means the channel has been chosen), press [V+]or [V-] to add or reduce the number,
then press [CH+] or [CH-] to choose currently channel number, press [V+] or [V-] to realize
the function.
COPY: Press [CH+] or [CH-] to choose program copy item The function allows you
to copy currently channel number to the channel number which you need.
Press [CH+] or [CH-] to choose target channeI number (it means the
Channel has been chosen, when the channel number changes color to red.),
Press [V+] or [V-] to add or reduce the number, them press [CH+] or [CH-]
to choose currently channel number, press [V+] or [V-] to realize the function.
WEAK SIGNAL: Usually, when the weak signal has been set to ON, even the weak signal
can be received in good condition.
5) Pre-set function
Press the [MENU] button for five times continuously, you shall find the pre-set
function menu. Press [CH+] or [CH-] to choose the item which you request, then
press [V+] or [V-] to switchover the item. The format is as follows:
English
PRESET
AUTO SEARCH
SEARCH
FINE TUNE
BAND
PROGRAM
SKIP
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII
7
UHF
OFF
AUTO SEARCH: the original set is auto search, press [V+] or [V-] to make it auto search. It
would Search all the currently TV channels and store them.
SEARCH: press [CH+] or [CH-] to choose this item, then press [V+] or [V-] to proceed to
search channels by hand. It would search one channel and store it.
FINE TUNE: press [CH-] or [CH-] to choose this item, then press [V+] or [V-], you can adjust
the program conditions while you are watching by hand.
BAND: press [CH+] or [CH-] to choose this item, then press [V+] or [V-] to choose the
band, the band formats which you can choose have: VHF-L, VHF-H, UHF.
PROGRAM: press [CH+] or [CH-] to choose this item, then press [V+] or [V-] to add or reduce the Channel, the total channels for your selection are from 0 to 255.
SKIP: press [CH+] or [CH-] to choose this item, then press [V+] or [V-] to clear the current
channel.
6) Clock-set function
Press the [MENU] button for six times continuously, you shall find the clock-set
function menu. Press [CH+] or [CH-] to choose the item which you request, then
press [V+] or [V-] to switchover the item.
The original set is 0. Press [V +] or [V-] to add the sleeping time, it will
add 10 minutes when you press one time, the max sleeping time is 240 minutes.
CLOCK: press [CH+] or [CH-] to choose this item, the original condition is as below:
CLOCK
SLEEP
TIME
OFF TIME
ON TIME
ALARM
B.TIME
B.PR
0
-:-:--:---: -:-
8
English
Press [V+] or [V-] to zero, press [V+] to add one minute, the max can be 59 minutes, then
press the button once more, it come back to zero. Press [V-] to add one hour, the max can
be 23 hours, then press the button once more, it comes back to original condition.
NOTE: the clock will come back to original condition when the Power plug is taken out
from the socket.
OFF TIME: press [CH+] or [CH-] to find the original condition of this item, then press [V+]
or [V-] to make it to zero, press [V+] to add one minute, the max can be 59 minutes, then
press the button once more, it come back to zero. Press [V-] to add one hour, the max can
be 23 hours, then press the button once more, it comes back to original condition.
The unit will switch off automatically when the closing time arrives.
NOTE: the clock will come back to original condition when the Power plug is taken out
from the socket.
ON TIME: press [CH-] to find the original condition of this item, then press [V+] or [V-] to
make it to zero, press [V+] to add one minute, the max can be 59 minutes, then press the
button, once more, it comes back to zero. Press [V-] to add one hour, the max can be 23
hours, then press the button once more, it come back to origiinal condition. The unit will
switch on automatically when the ON time comes.
NOTE: the clock will come back to original condition when the Power plug is taken out
from the socket.
ALARM: press [CH-] to find the original condition of this item, then press [V+) or [V-] to
make it to zero, press [V+] to add one minute, the max can be 59 minutes, then press the
button once more, it come back to zero. Press [V-] to add one hour, the max can be 23
hours, then press the button once more, it comes back to original condition. On the
display will appear ALARM when the alam time comes.
B. TIME: press [CH+] to find the original condition of this item, then press [V+] or [V-] to
make it to zero, Press [V+] to add one minute, the max, can be 59 minutes, then press the
button once more, it come back to zero. Press [V-] to add one hour, the maximum hour
can be 23 hour, then press the button once more, it comes back to original condition. The
unit will switch on at the time when the booking time comes, showing the channel
selected with B.PR.
B.PR: press [V+] or [V-] to add or reduce the booking channel number, you can choose
from 0 to 255.
7) AV operation
When you change TV system to AV system, Pre-set function and S.SYS, SWAP, COPY,
WEAK SIGNAL, PRESET will not be displayed on the screen.
English
9
10
English
MUTE FUNCTION
IMPORTANT SAFEGUARDS
The Mute button (2) on the Remote Control allows the muting of the sound. When
pressed, “ ” appears on the display. Press Mute again to get sound again.
Avoid places with excessive humidity or near water or touching the TV set with wet hands.
Avoid places with extremely high or low temperatures, dust, or subject to excessive
sunlight, in a vehicle also. Avoid applying strong shocks to the set.
Do not use any chemical solvent (alcohol, benzine, thinner, etc.) for cleaning the TV set.
Do not disassemble or alter the TV set.
MONITOR OPERATIONS
1. To use the unit as a colour monitor, to see images coming from a VCR or a video-camera, connect the A/V cable (included) in the A/V IN jack (6) on the side of the unit.
2. Press the POWER button (1) to ON to turn on the unit.
3. Press the AV/TV Button on the unit (3) or the TV/AV Button (7) on the remote control.
4. Press the Volume Controls VOL -/+ (2) on the TV to adjust volume to desired level.
5. To turn Off the unit, press the POWER button (1).
RECALL BUTTON (3)
Press this button to return to the previously tuned station.
MIRROR FUNCTION
This unit is equipped with a special feature that displays the signal of a video-camera
(not included) installed on the rear side of a van, a truck or a camper, for rear viewing
during parking or rear motion. If needed, the TV will reverse the picture for the viewer.
Horizontal Flip
Press the MIRROR Button (8) on the remote control, the screen is flipped over left and right.
EARPHONES
Insert the earphone (supplied) in the Earphone socket (5) for private listening.
ACCESSORIES
- Remote control
- AC/DC Adaptor
- Car Adapter
- A/V RCA Cable
- Earphone
- Support
- Battery pack
English
TROUBLE-SHOOTING
11
12
English
SPECIFICATIONS
SCREEN TYPE
LCD-TFT
SYMPTOMS AND POSSIBLE CAUSES
SCREEN SIZE
12.7 CM (5")
A) No picture, No sound
TELEVISION SYSTEM
PAL B/G-I, SECAM BG-DK-L
- Check Power cord connection
RECEIVABLE FREQUENCIES
VHF-1 CH2-CH4, VHF-3 CH5- CH12,
- Switch Power to ON
UHF CH21-CH69
HYPERBAND
S1 - S41
B) Good picture, No sound
MEMORIES
255
- Press Volume + button
VIDEO IN
1Vp-p (75 Ohm)
- Check if Mute function is inserted . In case press Mute button again
AUDIO IN
100-300 MV (RMS)
DISPLAY RESOLUTION
960(H) X 234(V) dots
C) No picture, Good sound
ACTIVE AREA
110.2(H) X 84(V) mm
- Adjust brightness control
AUDIO OUTPUT
0.5W (MAX)
POWER SUPPLY
DC 11V-15V (1A)
D) No colour
POWER CONSUMPTION
6W
- Adjust the colour control
DIMENSION
155(L) X 125(H) X 30(D)
-Check the Tuning with FINE Tuning
WEIGHT
420 g (without batteries)
E) Snowy picture, Noisy sound
Due to continuing improvements, the features and design are subject to change without
notice.
- Check and move the antenna
F) Dotted line or stripes
- This may be caused by local interference (e.g. cars, neon signs, hair dryers, etc)
Adjust the antenna for minimum interference
G) Double images or ‘Ghosts’
- This may be caused by reflections from nearby mountains or buildings.
H) Remote control malfunction or reduction in operating distance
- Check battery terminals or replace batteries
- Clean indicator window (remote sensor) (9)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising