Hormann HSP4 Remote Controls

Hormann HSP4 Remote Controls
0800 525 442
DE
EN
FR
NL
IT
ES
TR20A100 RE / 02.2012
PT
www.thegaragedoorcentre.co.uk
Bedienungsanleitung
Handsender HSP 4 BiSecur
Operating instructions
Hand transmitter HSP 4 BiSecur
Instructions d’utilisation
Emetteur HSP 4 BiSecur
Bedieningshandleiding
Handzender HSP 4 BiSecur
Istruzioni d’uso
Telecomando HSP 4 BiSecur
Instrucciones de servicio
Emisor manual HSP 4 BiSecur
Instruções de funcionamento
Emissor HSP 4 BiSecur
ENGLISH
0800 525 442
Contents
1
2
2.1
2.2
3
4
5
5.1
6
7
7.1
7.2
8
9
9.1
10
11
12
13
www.thegaragedoorcentre.co.uk
About these instructions..............................................15
Safety instructions........................................................15
Intended use...................................................................15
Safety instructions for operating
the hand transmitter........................................................16
Scope of delivery...........................................................17
Description of the hand transmitter
HSP 4 BiSecur...............................................................18
Initial start-up................................................................18
Inserting the battery........................................................18
Operation.......................................................................19
Learning and inheriting / transmitting
a radio code...................................................................20
Teaching in a radio code.................................................20
Mixed operation / BiSecur and fixed code 868 MHz.......21
Activating / deactivating the button lock-out..............21
Reset..............................................................................22
Setting the fixed code 868 MHz.....................................22
LED display....................................................................23
Cleaning.........................................................................24
Disposal.........................................................................24
Technical data...............................................................24
Dissemination as well as duplication of this document and the use and
communication of its content are prohibited unless explicitly permitted.
Noncompliance will result in damage compensation obligations. All rights
reserved in the event of patent, utility model or design model registration.
Subject to changes.
14
TR20A100 RE / 02.2012
ENGLISH
0800 525 442
www.thegaragedoorcentre.co.uk
Dear Customer,
We thank you for choosing a quality product from
our company.
1
About these instructions
Read through all of the instructions carefully, as they
contain important information about the product.
Pay attention to and follow the instructions provided,
particularly the safety instructions and warnings.
Further information about handling the hand
transmitter can be found on the Internet
at www.hoermann.com
Please keep these instructions in a safe place
and make sure that they are available to all users
at all times.
2
Safety instructions
2.1
Intended use
The HSP 4 BiSecur is a unidirectional transmitter
for operators and their accessories. It can be
operated with both the BiSecur radio and the fixed
code 868 MHz.
Other types of application are prohibited.
The manufacturer is not liable for damage
caused by improper use or incorrect operation.
TR20A100 RE / 02.2012
15
ENGLISH
0800 525 442
www.thegaragedoorcentre.co.uk
Safety instructions for operating
the hand transmitter
2.2
Warning
Danger of injury during door travel
Persons may be injured by door travel if the hand
transmitter is actuated.
▶ Make sure that the hand transmitters are kept
away from children and can only be used
by people who have been instructed on how
the remote-control door functions!
▶ If the door has only one safety device, only
operate the hand transmitter if you are within
sight of the door!
▶ Only drive or pass through remote control door
systems if the door is in the Open end-of-travel
position!
▶ Never stand in the door’s area of travel.
▶ Please note that unwanted door travel
may occur if a hand transmitter button
is accidentally pressed (e.g. if stored
in a pocket / handbag).
Caution
Danger of injuries due to unintended door travel
▶ See warning in section 7
16
TR20A100 RE / 02.2012
0800 525 442
ENGLISH
www.thegaragedoorcentre.co.uk
ATTENTION
Malfunction due to environmental influences
Non-compliance with these instructions can impair
function!
Protect the hand transmitter from the following
conditions:
• Direct sunlight (permissible ambient
temperature: -20°C to +60°C)
• Moisture
• Dust
Notes:
• If there is no separate garage entrance, perform
all programming changes and extensions of radio
systems from inside the garage.
• After programming or extending the radio
system, perform a function test.
• Only use original components when putting
the radio system into service or extending it.
• Local conditions may affect the range of the
radio system.
• When used at the same time, GSM 900 mobile
phones can affect the range.
3
•
•
•
•
Scope of delivery
Hand transmitter HSP 4 BiSecur
1x 3 V battery, type: CR2025
Key ring
Operating instructions
TR20A100 RE / 02.2012
17
ENGLISH
0800 525 442
4
www.thegaragedoorcentre.co.uk
Description of the hand
transmitter HSP 4 BiSecur
1
2
3
4
5
6
LED, bi-colour
Hand transmitter buttons
Sliding switch
Battery compartment
Battery
Key ring
5
Initial start-up
After inserting the battery, the hand transmitter
HSP 4 BiSecur is ready for operation.
5.1
18
Inserting the battery
TR20A100 RE / 02.2012
0800 525 442
ENGLISH
www.thegaragedoorcentre.co.uk
ATTENTION
Destruction of the hand transmitter by leaking
batteries
Batteries can leak and destroy the hand
transmitter.
▶ Remove the battery from the hand transmitter
if it is out of use for a long period of time.
6
Operation
NOTE:
If the radio code for the taught-in hand transmitter
button was copied from another hand transmitter
beforehand, the hand transmitter button must
be pressed a second time during initial start-up.
Each hand transmitter button is assigned to a radio
code. Press the button of the hand transmitter
whose radio code you want to transmit.
– The radio code is transmitted and the LED
is illuminated blue for 2 seconds.
Note:
If the battery is almost empty, the LED flashes
red twice
a. before transmitting the radio code.
▶ The battery should be replaced soon.
b. and the radio code is not transmitted.
▶ The battery must be replaced immediately.
TR20A100 RE / 02.2012
19
ENGLISH
0800 525 442
7
www.thegaragedoorcentre.co.uk
Learning and inheriting / transmitting a radio code
Caution
Danger of injuries due to unintended door travel
Unintended door travel may occur while teaching
in the radio system.
▶ Pay attention that no persons or objects are
in the door's area of travel when teaching
in the radio code.
7.1
Teaching in a radio code
Note:
The button lock-out must be deactivated
(see section 8).
1. Press the hand transmitter button on hand
transmitter A, whose radio code is to be
inherited, and keep it pressed.
– The radio code is transmitted and the LED is
illuminated blue for 2 seconds then goes out.
– After 5 seconds, the LED alternates flashing
in red and blue; the radio code is transmitted.
20
TR20A100 RE / 02.2012
ENGLISH
0800 525 442
www.thegaragedoorcentre.co.uk
2. Place the hand transmitter B into which you want
to teach in the radio code, to its left.
3. Press the hand transmitter button to which
the new radio code is to be allocated, and keep
it pressed.
– The LED will flash slowly in blue.
– If the radio code is recognised, the LED
flashes quickly in blue.
– After 2 seconds, the LED goes out.
Note:
You have 15 seconds to inherit / transmit the code.
The process must be repeated if the radio code is not
successfully inherited / transmitted within this time.
7.2
Mixed operation / BiSecur and fixed
code 868 MHz
If the BiSecur radio has been set, mixed operation
is possible, i.e. existing hand transmitters with an
868 MHz fixed code (grey hand transmitters with blue
buttons or the device designation HSD2-868) can
be taught in from the BiSecur hand transmitter.
8
Activating / deactivating
the button lock-out
TR20A100 RE / 02.2012
21
ENGLISH
0800 525 442
www.thegaragedoorcentre.co.uk
The button lock-out is activated if the sliding switch
is in the OFF position.
The button lock-out is deactivated if the sliding
switch is in the ON position.
9
Reset
Each hand transmitter button is assigned to a new
radio code by means of the following steps.
1. Open the battery compartment and remove
the battery for 10 seconds.
2. Press a hand transmitter button and keep
it pressed.
3. Insert the battery and close the battery
compartment.
– The LED slowly flashes in blue for 4 seconds.
– The LED flashes rapidly in blue for 2 seconds.
– The LED is illuminated blue for a long time.
4. Release the hand transmitter button.
All radio codes are newly assigned.
Note:
If the hand transmitter button is released prematurely,
no new radio codes are assigned.
9.1
Setting the fixed code 868 MHz
If immediately following the device reset, the hand
transmitter button remains pressed, the fixed code
868 MHz will be activated.
– The LED slowly flashes in red for 4 seconds.
– The LED flashes rapidly in red for 2 seconds.
– The LED is illuminated red for a long time.
All radio codes are newly assigned.
Note:
If the hand transmitter button is released prematurely,
the BiSecur radio will remain active.
22
TR20A100 RE / 02.2012
ENGLISH
0800 525 442
www.thegaragedoorcentre.co.uk
Further information about operating the hand
transmitter with the fixed code 868 MHz can be found
on the Internet at www.hoermann.com
10
LED display
Blue (BU)
Condition
Function
Is illuminated
for 2 seconds
A radio code is being
transmitted
Flashes slowly
Hand transmitter
is in the learn mode
Flashes quickly after
slow flashing
A valid radio code
was detected during
the learning run
Flashes slowly
for 4 seconds
Flashes quickly
for 2 seconds
Illuminated long
Device reset is being
performed or completed
Red (RD)
Condition
Function
Flashes 2x
The battery
is almost empty
Blue (BU) and Red (RD)
Condition
Function
Flashing alternately
Hand transmitter is in
inherit / transmit mode
TR20A100 RE / 02.2012
23
ENGLISH
0800 525 442
11
Cleaning
www.thegaragedoorcentre.co.uk
ATTENTION
Damaging the hand transmitter by faulty
cleaning
Cleaning the hand transmitter with unsuitable
cleaning agents can damage the hand transmitter
housing as well as the hand transmitter buttons.
▶ Clean the hand transmitter with a clean, soft,
damp cloth.
12
Disposal
Electrical and electronic devices, as well
as batteries, may not be disposed of in
household rubbish. They must be returned
to the appropriate recycling facilities.
13
Technical data
Type
Frequency
Power supply
Perm. ambient
temperature
Protection category
24
Hand transmitter
HSP 4 BiSecur
868 MHz
1x 3 V battery,
type: CR2025
-20°C to +60°C
IP 20
TR20A100 RE / 02.2012
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising